Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Datasheet January 2012 Document Number: 322169-004 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information. The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained at http:// www.intel.com/design/literature.htm. Code names featured are used internally within Intel to identify products that are in development and not yet publicly announced for release. Customers, licensees and other third parties are not authorized by Intel to use code names in advertising, promotion or marketing of any product or services and any such use of Intel's internal code names is at the sole risk of the user. Intel(R) Virtualization Technology requires a computer system with an enabled Intel(R) processor, BIOS, virtual machine monitor (VMM). Functionality, performance or other benefits will vary depending on hardware and software configurations. Software applications may not be compatible with all operating systems. Consult your PC manufacturer. For more information, visit: http://www.intel.com/go/virtualization. Intel(R) Active Management Technology requires activation and a system with a corporate network connection, an Intel(R) AMT-enabled chipset, network hardware and software. For notebooks, Intel AMT may be unavailable or limited over a host OS-based VPN, when connecting wirelessly, on battery power, sleeping, hibernating or powered off. Results dependent upon hardware, setup & configuration. For more information, visit http:// www.intel.com/technology/platform-technology/intel-amt. Intel(R) High Definition Audio (Intel(R) HD Audio) requires an Intel(R) HD Audio enabled system. Consult your PC manufacturer for more information. Sound quality will depend on equipment and actual implementation. For more information about Intel HD Audio, refer to http://www.intel.com/design/ chipsets/hdaudio.htm. The original equipment manufacturer must provide TPM functionality, which requires a TPM-supported BIOS. TPM functionality must be initialized and may not be available in all countries. Intel(R) Anti-Theft Technology-PC Protection (Intel(R) AT-p). No computer system can provide absolute security under all conditions. Intel(R) Anti-Theft Technology (Intel(R) AT-p) requires the computer system to have an Intel(R) AT-enabled chipset, BIOS, firmware release, software and an Intel AT-capable Service Provider/ISV application and service subscription. The detection (triggers), response (actions), and recovery mechanisms only work after the Intel(R) AT functionality has been activated and configured. Certain functionality may not be offered by some ISVs or service providers and may not be available in all countries. Intel assumes no liability for lost or stolen data and/or systems or any other damages resulting thereof. Systems using Client Initiated Remote Access require wired LAN connectivity and may not be available in public hot spots or "click to accept" locations. For more information, refer to http://software.intel.com/en-us/blogs/2008/10/09/new-with-intel-amt-4050-fast-call-for-help-and-remote-pc-assist-akacira/ Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries. *Other names and brands may be claimed as the property of others. Copyright (c) 2012, Intel Corporation. All rights reserved. 2 Datasheet Contents 1 Introduction ............................................................................................................ 43 1.1 About This Manual ............................................................................................. 43 1.2 Overview ......................................................................................................... 47 1.2.1 Capability Overview ............................................................................. 49 1.3 Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset SKU Definition ..................... 55 1.4 Reference Documents ........................................................................................ 57 2 Signal Description ................................................................................................... 59 2.1 Direct Media Interface (DMI) to Host Controller ..................................................... 61 2.2 PCI Express* .................................................................................................... 61 2.3 Firmware Hub Interface...................................................................................... 62 2.4 PCI Interface .................................................................................................... 63 2.5 Serial ATA Interface........................................................................................... 65 2.6 LPC Interface.................................................................................................... 68 2.7 Interrupt Interface ............................................................................................ 68 2.8 USB Interface ................................................................................................... 69 2.9 Power Management Interface.............................................................................. 71 2.10 Processor Interface............................................................................................ 74 2.11 SMBus Interface................................................................................................ 74 2.12 System Management Interface............................................................................ 75 2.13 Real Time Clock Interface ................................................................................... 75 2.14 Miscellaneous Signals ........................................................................................ 76 2.15 Intel(R) High Definition Audio Link ......................................................................... 77 2.16 Controller Link .................................................................................................. 78 2.17 Serial Peripheral Interface (SPI) .......................................................................... 78 2.18 Intel(R) Quiet System Technology and Thermal Reporting ......................................... 79 2.19 JTAG Signals .................................................................................................... 80 2.20 Clock Signals .................................................................................................... 80 2.21 LVDS Signals (Mobile only) ................................................................................. 82 2.22 Analog Display /CRT DAC Signals ........................................................................ 83 2.23 Intel(R) Flexible Display Interface (FDI).................................................................. 84 2.24 Digital Display Signals........................................................................................ 84 2.25 General Purpose I/O Signals ............................................................................... 87 2.26 Manageability Signals ........................................................................................ 90 2.27 Power and Ground Signals .................................................................................. 91 2.28 Pin Straps ........................................................................................................ 93 2.28.1 Functional Straps ................................................................................ 93 2.28.2 External RTC Circuitry.......................................................................... 97 3 PCH Pin States......................................................................................................... 99 3.1 Integrated Pull-Ups and Pull-Downs ..................................................................... 99 3.2 Output and I/O Signals Planes and States........................................................... 101 3.3 Power Planes for Input Signals .......................................................................... 112 4 System Clocks ....................................................................................................... 119 5 Functional Description ........................................................................................... 123 5.1 DMI-to-PCI Bridge (D30:F0) ............................................................................. 123 5.1.1 PCI Bus Interface .............................................................................. 123 5.1.2 PCI Bridge As an Initiator ................................................................... 123 5.1.2.1 Memory Reads and Writes .................................................... 124 5.1.2.2 I/O Reads and Writes .......................................................... 124 5.1.2.3 Configuration Reads and Writes ............................................ 124 5.1.2.4 Locked Cycles ..................................................................... 124 5.1.2.5 Target / Master Aborts ......................................................... 124 5.1.2.6 Secondary Master Latency Timer ........................................... 124 5.1.2.7 Dual Address Cycle (DAC) .................................................... 124 5.1.2.8 Memory and I/O Decode to PCI ............................................. 125 5.1.3 Parity Error Detection and Generation .................................................. 125 5.1.4 PCIRST# .......................................................................................... 126 5.1.5 Peer Cycles ...................................................................................... 126 5.1.6 PCI-to-PCI Bridge Model..................................................................... 127 5.1.7 IDSEL to Device Number Mapping ....................................................... 127 Datasheet 3 5.2 5.3 5.4 5.5 5.6 5.7 4 5.1.8 Standard PCI Bus Configuration Mechanism........................................... 127 PCI Express* Root Ports (D28:F0,F1,F2,F3,F4,F5, F6, F7) ..................................... 127 5.2.1 Interrupt Generation .......................................................................... 128 5.2.2 Power Management............................................................................ 128 5.2.2.1 S3/S4/S5 Support ............................................................... 128 5.2.2.2 Resuming from Suspended State ........................................... 129 5.2.2.3 Device Initiated PM_PME Message.......................................... 129 5.2.2.4 SMI/SCI Generation ............................................................. 129 5.2.3 SERR# Generation ............................................................................. 130 5.2.4 Hot-Plug ........................................................................................... 130 5.2.4.1 Presence Detection .............................................................. 130 5.2.4.2 Message Generation............................................................. 131 5.2.4.3 Attention Button Detection.................................................... 131 5.2.4.4 SMI/SCI Generation ............................................................. 132 Gigabit Ethernet Controller (B0:D25:F0) ............................................................. 132 5.3.1 GbE PCI Express* Bus Interface........................................................... 134 5.3.1.1 Transaction Layer ................................................................ 134 5.3.1.2 Data Alignment ................................................................... 134 5.3.1.3 Configuration Request Retry Status........................................ 134 5.3.2 Error Events and Error Reporting ......................................................... 135 5.3.2.1 Data Parity Error ................................................................. 135 5.3.2.2 Completion with Unsuccessful Completion Status ..................... 135 5.3.3 Ethernet Interface ............................................................................. 135 5.3.3.1 Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset 82577/82578 PHY Interface .................................................. 135 5.3.4 PCI Power Management ...................................................................... 136 5.3.4.1 Wake Up ............................................................................ 136 5.3.5 Configurable LEDs ............................................................................. 138 5.3.6 Function Level Reset Support (FLR)...................................................... 138 5.3.6.1 FLR Steps ........................................................................... 139 LPC Bridge (with System and Management Functions) (D31:F0)............................. 139 5.4.1 LPC Interface .................................................................................... 139 5.4.1.1 LPC Cycle Types .................................................................. 140 5.4.1.2 Start Field Definition ............................................................ 141 5.4.1.3 Cycle Type / Direction (CYCTYPE + DIR) ................................. 141 5.4.1.4 Size ................................................................................... 141 5.4.1.5 SYNC ................................................................................. 142 5.4.1.6 SYNC Time-Out ................................................................... 142 5.4.1.7 SYNC Error Indication........................................................... 142 5.4.1.8 LFRAME# Usage .................................................................. 142 5.4.1.9 I/O Cycles .......................................................................... 143 5.4.1.10 Bus Master Cycles................................................................ 143 5.4.1.11 LPC Power Management ....................................................... 143 5.4.1.12 Configuration and PCH Implications........................................ 143 DMA Operation (D31:F0) .................................................................................. 144 5.5.1 Channel Priority................................................................................. 144 5.5.1.1 Fixed Priority ...................................................................... 144 5.5.1.2 Rotating Priority .................................................................. 145 5.5.2 Address Compatibility Mode ................................................................ 145 5.5.3 Summary of DMA Transfer Sizes .......................................................... 145 5.5.3.1 Address Shifting When Programmed for 16-Bit I/O Count by Words............................................................................ 145 5.5.4 Autoinitialize ..................................................................................... 146 5.5.5 Software Commands .......................................................................... 146 LPC DMA ........................................................................................................ 147 5.6.1 Asserting DMA Requests ..................................................................... 147 5.6.2 Abandoning DMA Requests.................................................................. 148 5.6.3 General Flow of DMA Transfers ............................................................ 148 5.6.4 Terminal Count.................................................................................. 148 5.6.5 Verify Mode ...................................................................................... 149 5.6.6 DMA Request De-assertion.................................................................. 149 5.6.7 SYNC Field / LDRQ# Rules .................................................................. 150 8254 Timers (D31:F0) ...................................................................................... 150 5.7.1 Timer Programming ........................................................................... 151 5.7.2 Reading from the Interval Timer .......................................................... 152 5.7.2.1 Simple Read ....................................................................... 152 5.7.2.2 Counter Latch Command ...................................................... 152 Datasheet 5.8 5.9 5.10 5.11 5.12 5.13 Datasheet 5.7.2.3 Read Back Command........................................................... 152 8259 Interrupt Controllers (PIC) (D31:F0) .......................................................... 153 5.8.1 Interrupt Handling............................................................................. 154 5.8.1.1 Generating Interrupts .......................................................... 154 5.8.1.2 Acknowledging Interrupts..................................................... 154 5.8.1.3 Hardware/Software Interrupt Sequence ................................. 155 5.8.2 Initialization Command Words (ICWx).................................................. 155 5.8.2.1 ICW1................................................................................. 155 5.8.2.2 ICW2................................................................................. 156 5.8.2.3 ICW3................................................................................. 156 5.8.2.4 ICW4................................................................................. 156 5.8.3 Operation Command Words (OCW)...................................................... 156 5.8.4 Modes of Operation ........................................................................... 156 5.8.4.1 Fully Nested Mode ............................................................... 156 5.8.4.2 Special Fully-Nested Mode .................................................... 157 5.8.4.3 Automatic Rotation Mode (Equal Priority Devices) .................... 157 5.8.4.4 Specific Rotation Mode (Specific Priority) ................................ 157 5.8.4.5 Poll Mode ........................................................................... 157 5.8.4.6 Edge and Level Triggered Mode............................................. 158 5.8.4.7 End of Interrupt (EOI) Operations ......................................... 158 5.8.4.8 Normal End of Interrupt ....................................................... 158 5.8.4.9 Automatic End of Interrupt Mode........................................... 158 5.8.5 Masking Interrupts ............................................................................ 159 5.8.5.1 Masking on an Individual Interrupt Request ............................ 159 5.8.5.2 Special Mask Mode .............................................................. 159 5.8.6 Steering PCI Interrupts ...................................................................... 159 Advanced Programmable Interrupt Controller (APIC) (D31:F0) .............................. 160 5.9.1 Interrupt Handling............................................................................. 160 5.9.2 Interrupt Mapping ............................................................................. 160 5.9.3 PCI / PCI Express* Message-Based Interrupts ....................................... 161 5.9.4 IOxAPIC Address Remapping .............................................................. 161 5.9.5 External Interrupt Controller Support ................................................... 161 Serial Interrupt (D31:F0) ................................................................................. 162 5.10.1 Start Frame...................................................................................... 162 5.10.2 Data Frames..................................................................................... 163 5.10.3 Stop Frame ...................................................................................... 163 5.10.4 Specific Interrupts Not Supported Using SERIRQ ................................... 163 5.10.5 Data Frame Format ........................................................................... 164 Real Time Clock (D31:F0)................................................................................. 165 5.11.1 Update Cycles................................................................................... 165 5.11.2 Interrupts ........................................................................................ 166 5.11.3 Lockable RAM Ranges ........................................................................ 166 5.11.4 Century Rollover ............................................................................... 166 5.11.5 Clearing Battery-Backed RTC RAM ....................................................... 166 Processor Interface (D31:F0) ............................................................................ 168 5.12.1 Processor Interface Signals and VLW Messages ..................................... 168 5.12.1.1 A20M# (Mask A20) / A20GATE ............................................. 168 5.12.1.2 INIT (Initialization).............................................................. 169 5.12.1.3 FERR# (Numeric Coprocessor Error) ...................................... 169 5.12.1.4 NMI (Non-Maskable Interrupt) .............................................. 170 5.12.1.5 Processor Power Good (PROCPWRGD) .................................... 170 5.12.2 Dual-Processor Issues........................................................................ 170 5.12.2.1 Usage Differences ............................................................... 170 5.12.3 Virtual Legacy Wire (VLW) Messages.................................................... 170 Power Management (D31:F0) ........................................................................... 171 5.13.1 Features .......................................................................................... 171 5.13.2 PCH and System Power States ............................................................ 171 5.13.3 System Power Planes......................................................................... 173 5.13.4 SMI#/SCI Generation ........................................................................ 173 5.13.4.1 PCI Express* SCI ................................................................ 176 5.13.4.2 PCI Express* Hot-Plug ......................................................... 176 5.13.5 C-States .......................................................................................... 176 5.13.6 Dynamic PCI Clock Control (Mobile Only).............................................. 176 5.13.6.1 Conditions for Checking the PCI Clock .................................... 177 5.13.6.2 Conditions for Maintaining the PCI Clock................................. 177 5.13.6.3 Conditions for Stopping the PCI Clock .................................... 177 5.13.6.4 Conditions for Re-Starting the PCI Clock................................. 177 5 5.13.6.5 LPC Devices and CLKRUN# ................................................... 178 Sleep States ..................................................................................... 178 5.13.7.1 Sleep State Overview ........................................................... 178 5.13.7.2 Initiating Sleep State ........................................................... 178 5.13.7.3 Exiting Sleep States ............................................................. 179 5.13.7.4 PCI Express* WAKE# Signal and PME Event Message ............... 181 5.13.7.5 Sx-G3-Sx, Handling Power Failures ........................................ 181 5.13.8 Event Input Signals and Their Usage .................................................... 181 5.13.8.1 PWRBTN# (Power Button) .................................................... 182 5.13.8.2 RI# (Ring Indicator) ............................................................ 183 5.13.8.3 PME# (PCI Power Management Event).................................... 183 5.13.8.4 SYS_RESET# Signal ............................................................. 183 5.13.8.5 THRMTRIP# Signal............................................................... 183 5.13.9 ALT Access Mode ............................................................................... 184 5.13.9.1 Write Only Registers with Read Paths in ALT Access Mode ......... 185 5.13.9.2 PIC Reserved Bits ................................................................ 187 5.13.9.3 Read Only Registers with Write Paths in ALT Access Mode ......... 187 5.13.10 System Power Supplies, Planes, and Signals.......................................... 187 5.13.10.1 Power Plane Control with SLP_S3#, SLP_S4#, SLP_S5#, SLP_M# and SLP_LAN# .......................... 187 5.13.10.2 SLP_S4# and Suspend-To-RAM Sequencing ............................ 188 5.13.10.3 PWROK Signal ..................................................................... 188 5.13.10.4 BATLOW# (Battery Low) (Mobile Only) ................................... 188 5.13.10.5 SLP_LAN# Pin Behavior ........................................................ 189 5.13.10.6 RTCRST# and SRTCRST# ..................................................... 189 5.13.11 Clock Generators ............................................................................... 189 5.13.12 Legacy Power Management Theory of Operation .................................... 190 5.13.12.1 APM Power Management (Desktop Only)................................. 190 5.13.12.2 Mobile APM Power Management (Mobile Only) ......................... 190 5.13.13 Reset Behavior .................................................................................. 190 System Management (D31:F0) .......................................................................... 192 5.14.1 Theory of Operation ........................................................................... 193 5.14.1.1 Detecting a System Lockup ................................................... 193 5.14.1.2 Handling an Intruder ............................................................ 193 5.14.1.3 Detecting Improper Flash Programming .................................. 193 5.14.1.4 Heartbeat and Event Reporting using SMLink/SMBus ................ 193 5.14.2 TCO Modes ....................................................................................... 194 5.14.2.1 TCO Legacy/Compatible Mode ............................................... 194 5.14.2.2 Advanced TCO Mode ............................................................ 195 General Purpose I/O (D31:F0) ........................................................................... 197 5.15.1 Power Wells ...................................................................................... 197 5.15.2 SMI# SCI and NMI Routing ................................................................. 197 5.15.3 Triggering......................................................................................... 197 5.15.4 GPIO Registers Lockdown ................................................................... 197 5.15.5 Serial POST Codes Over GPIO.............................................................. 198 5.15.5.1 Theory of operation ............................................................. 198 5.15.5.2 Serial Message Format ......................................................... 199 SATA Host Controller (D31:F2, F5)..................................................................... 200 5.16.1 SATA Feature Support ........................................................................ 201 5.16.2 Theory of Operation ........................................................................... 202 5.16.2.1 Standard ATA Emulation ....................................................... 202 5.16.2.2 48-Bit LBA Operation ........................................................... 202 5.16.3 SATA Swap Bay Support ..................................................................... 202 5.16.4 Hot Plug Operation............................................................................. 202 5.16.4.1 Low Power Device Presence Detection .................................... 202 5.16.5 Function Level Reset Support (FLR)...................................................... 203 5.16.5.1 FLR Steps ........................................................................... 203 5.16.6 Intel(R) Rapid Storage Technology Configuration...................................... 203 5.16.6.1 Intel(R) Rapid Storage Manager RAID Option ROM ..................... 204 5.16.7 Power Management Operation ............................................................. 204 5.16.7.1 Power State Mappings .......................................................... 204 5.16.7.2 Power State Transitions ........................................................ 205 5.16.7.3 SMI Trapping (APM) ............................................................. 206 5.16.8 SATA Device Presence ........................................................................ 206 5.16.9 SATA LED ......................................................................................... 207 5.16.10 AHCI Operation ................................................................................. 207 5.16.11 SGPIO Signals ................................................................................... 207 5.13.7 5.14 5.15 5.16 6 Datasheet 5.17 5.18 5.19 5.20 5.21 Datasheet 5.16.11.1 Mechanism ......................................................................... 207 5.16.11.2 Message Format.................................................................. 208 5.16.11.3 LED Message Type .............................................................. 209 5.16.11.4 SGPIO Waveform ................................................................ 210 5.16.12 External SATA................................................................................... 211 High Precision Event Timers.............................................................................. 211 5.17.1 Timer Accuracy ................................................................................. 211 5.17.2 Interrupt Mapping ............................................................................. 212 5.17.3 Periodic vs. Non-Periodic Modes .......................................................... 212 5.17.4 Enabling the Timers........................................................................... 213 5.17.5 Interrupt Levels ................................................................................ 213 5.17.6 Handling Interrupts ........................................................................... 214 5.17.7 Issues Related to 64-Bit Timers with 32-Bit Processors........................... 214 USB EHCI Host Controllers (D29:F0 and D26:F0)................................................. 215 5.18.1 EHC Initialization............................................................................... 215 5.18.1.1 BIOS Initialization ............................................................... 215 5.18.1.2 Driver Initialization .............................................................. 215 5.18.1.3 EHC Resets ........................................................................ 215 5.18.2 Data Structures in Main Memory ......................................................... 215 5.18.3 USB 2.0 Enhanced Host Controller DMA................................................ 216 5.18.4 Data Encoding and Bit Stuffing............................................................ 216 5.18.5 Packet Formats ................................................................................. 216 5.18.6 USB 2.0 Interrupts and Error Conditions............................................... 216 5.18.6.1 Aborts on USB 2.0-Initiated Memory Reads ............................ 217 5.18.7 USB 2.0 Power Management ............................................................... 217 5.18.7.1 Pause Feature..................................................................... 217 5.18.7.2 Suspend Feature ................................................................. 217 5.18.7.3 ACPI Device States.............................................................. 218 5.18.7.4 ACPI System States............................................................. 218 5.18.8 USB 2.0 Legacy Keyboard Operation .................................................... 218 5.18.9 USB 2.0 Based Debug Port ................................................................. 219 5.18.9.1 Theory of Operation............................................................ 219 5.18.10 EHCI Caching ................................................................................... 224 5.18.11 USB Pre-Fetch Based Pause ................................................................ 224 5.18.12 Function Level Reset Support (FLR) ..................................................... 224 5.18.12.1 FLR Steps .......................................................................... 224 5.18.13 USB Overcurrent Protection ................................................................ 225 Integrated USB 2.0 Rate Matching Hub .............................................................. 226 5.19.1 Overview ......................................................................................... 226 5.19.2 Architecture ..................................................................................... 226 SMBus Controller (D31:F3) ............................................................................... 227 5.20.1 Host Controller ................................................................................. 227 5.20.1.1 Command Protocols............................................................. 228 5.20.2 Bus Arbitration.................................................................................. 231 5.20.3 Bus Timing ....................................................................................... 232 5.20.3.1 Clock Stretching.................................................................. 232 5.20.3.2 Bus Time Out (The PCH as SMBus Master) .............................. 232 5.20.4 Interrupts / SMI#.............................................................................. 232 5.20.5 SMBALERT# ..................................................................................... 233 5.20.6 SMBus CRC Generation and Checking................................................... 233 5.20.7 SMBus Slave Interface ....................................................................... 234 5.20.7.1 Format of Slave Write Cycle.................................................. 234 5.20.7.2 Format of Read Command .................................................... 236 5.20.7.3 Slave Read of RTC Time Bytes .............................................. 238 5.20.7.4 Format of Host Notify Command ........................................... 238 Thermal Management ...................................................................................... 240 5.21.1 Thermal Sensor ................................................................................ 240 5.21.1.1 Internal Thermal Sensor Operation ........................................ 240 5.21.2 Thermal Reporting Over System Management Link 1 Interface (SMLink1) . 241 5.21.2.1 Supported Addresses ........................................................... 242 5.21.2.2 I2C Write Commands to the Intel(R) ME ................................... 243 5.21.2.3 Block Read Command .......................................................... 243 5.21.2.4 Read Data Format ............................................................... 245 5.21.2.5 Thermal Data Update Rate ................................................... 246 5.21.2.6 Temperature Comparator and Alert ....................................... 247 5.21.2.7 BIOS Set Up ....................................................................... 248 5.21.2.8 SMBus Rules....................................................................... 249 7 5.22 5.23 5.24 5.25 5.26 5.27 5.28 8 5.21.2.9 Case for Considerations ........................................................ 250 Intel(R) High Definition Audio Overview (D27:F0)................................................... 252 5.22.1 Intel(R) High Definition Audio Docking (Mobile Only) ................................ 252 5.22.1.1 Dock Sequence ................................................................... 252 5.22.1.2 Exiting D3/CRST# when Docked ............................................ 253 5.22.1.3 Cold Boot/Resume from S3 When Docked ............................... 254 5.22.1.4 Undock Sequence ................................................................ 254 5.22.1.5 Normal Undock.................................................................... 254 5.22.1.6 Surprise Undock .................................................................. 255 5.22.1.7 Interaction Between Dock/Undock and Power Management States ................................................................................ 255 5.22.1.8 Relationship between HDA_DOCK_RST# and HDA_RST# .......... 255 Intel(R) Active Management Technology 6.0 (Intel(R) AMT) ....................................... 256 5.23.1 Intel(R) AMT6.x and ASF 2.0 Features .................................................... 257 5.23.2 Intel(R) AMT Requirements ................................................................... 257 Serial Peripheral Interface (SPI) ........................................................................ 258 5.24.1 SPI Supported Feature Overview ......................................................... 258 5.24.1.1 Non-Descriptor Mode ........................................................... 258 5.24.1.2 Descriptor Mode .................................................................. 258 5.24.1.3 Device Partitioning............................................................... 260 5.24.2 Flash Descriptor ................................................................................ 260 5.24.2.1 Descriptor Master Region ...................................................... 262 5.24.3 Flash Access ..................................................................................... 263 5.24.3.1 Direct Access Security .......................................................... 263 5.24.3.2 Register Access Security ....................................................... 263 5.24.4 Serial Flash Device Compatibility Requirements ..................................... 264 5.24.4.1 PCH SPI Based BIOS Requirements ........................................ 264 5.24.4.2 Integrated LAN Firmware SPI Flash Requirements .................... 264 5.24.4.3 Intel(R) Management Engine Firmware SPI Flash Requirements ... 265 5.24.4.4 Hardware Sequencing Requirements ...................................... 265 5.24.5 Multiple Page Write Usage Model.......................................................... 266 5.24.5.1 Soft Flash Protection ............................................................ 266 5.24.5.2 BIOS Range Write Protection................................................. 267 5.24.5.3 SMI# Based Global Write Protection ....................................... 267 5.24.6 Flash Device Configurations ................................................................ 267 5.24.7 SPI Flash Device Recommended Pinout................................................. 267 5.24.8 Serial Flash Device Package ................................................................ 268 5.24.8.1 Common Footprint Usage Model ............................................ 268 5.24.8.2 Serial Flash Device Package Recommendations ........................ 268 (R) Intel Quiet System Technology (Intel(R) QST) (Desktop Only) ............................... 269 5.25.1 PWM Outputs .................................................................................... 269 5.25.2 TACH Inputs ..................................................................................... 269 Feature Capability Mechanism ........................................................................... 269 PCH Display Interfaces and Intel(R) Flexible Display Interconnect............................. 270 5.27.1 Analog Display Interface Characteristics................................................ 270 5.27.1.1 Integrated RAMDAC ............................................................. 271 5.27.1.2 DDC (Display Data Channel) ................................................. 271 5.27.2 Digital Display Interfaces .................................................................... 271 5.27.2.1 LVDS (Mobile only) .............................................................. 271 5.27.2.2 LVDS Pair States ................................................................. 272 5.27.2.3 Single Channel versus Dual Channel Mode .............................. 273 5.27.2.4 Panel Power Sequencing ....................................................... 273 5.27.2.5 LVDS DDC .......................................................................... 274 5.27.2.6 High Definition Multimedia Interface....................................... 274 5.27.2.7 Digital Video Interface (DVI) ................................................. 275 5.27.2.8 Display Port* ...................................................................... 275 5.27.2.9 Embedded DisplayPort.......................................................... 275 5.27.2.10 DisplayPort Aux Channel....................................................... 276 5.27.2.11 DisplayPort Hot-Plug Detect (HPD) ......................................... 276 5.27.2.12 Integrated Audio over HDMI and DisplayPort ........................... 276 5.27.2.13 Serial Digital Video Out (SDVO) ............................................. 276 5.27.2.14 Control Bus......................................................................... 277 5.27.3 Mapping of Digital Display Interface Signals .......................................... 278 5.27.4 Multiple Display Configurations ............................................................ 279 5.27.5 High-bandwidth Digital Content Protection (HDCP) ................................. 279 5.27.6 Intel(R) Flexible Display Interconnect ..................................................... 280 Intel(R) Virtualization Technology ........................................................................ 280 Datasheet Intel(R) VT-d Objectives ....................................................................... 280 Intel(R) VT-d Features Supported .......................................................... 280 Support for Function Level Reset (FLR) in Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset................................................ 281 5.28.4 Virtualization Support for PCH's IOxAPIC .............................................. 281 5.28.5 Virtualization Support for High Precision Event Timer (HPET)................... 281 Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Platform Clocks.................. 282 5.29.1 Platform Clocking Requirements .......................................................... 282 5.28.1 5.28.2 5.28.3 5.29 6 Ballout Definition................................................................................................... 283 6.1 PCH Desktop Ballout ........................................................................................ 283 6.2 PCH Ballout Mobile Ballout ................................................................................ 294 6.3 PCH Ballout Small Form Factor Ballout ............................................................... 306 7 Package Information ............................................................................................. 319 7.1 PCH package (Desktop Only) ............................................................................ 319 7.2 PCH package (Mobile Only)............................................................................... 321 7.3 PCH package (Mobile SFF Only)......................................................................... 323 8 Electrical Characteristics ....................................................................................... 325 8.1 Thermal Specifications ..................................................................................... 325 8.1.1 Desktop Storage Specifications and Thermal Design Power (TDP) ............ 325 8.1.2 Mobile Storage Specifications and Thermal Design Power (TDP) ............... 325 8.2 Absolute Maximum and Minimum Ratings ........................................................... 326 8.3 Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Power Supply range ........... 327 8.4 General DC Characteristics ............................................................................... 327 8.5 Display DC Characteristics ................................................................................ 340 8.6 AC Characteristics ........................................................................................... 342 8.7 Power Sequencing and Reset Signal Timings ....................................................... 360 8.8 Power Management Timing Diagrams................................................................. 363 8.9 AC Timing Diagrams ........................................................................................ 366 9 Register and Memory Mapping............................................................................... 377 9.1 PCI Devices and Functions................................................................................ 378 9.2 PCI Configuration Map ..................................................................................... 379 9.3 I/O Map ......................................................................................................... 379 9.3.1 Fixed I/O Address Ranges .................................................................. 379 9.3.2 Variable I/O Decode Ranges ............................................................... 382 9.4 Memory Map................................................................................................... 383 9.4.1 Boot-Block Update Scheme................................................................. 385 10 Chipset Configuration Registers............................................................................. 387 10.1 Chipset Configuration Registers (Memory Space) ................................................. 387 10.1.1 V0CTL--Virtual Channel 0 Resource Control Register .............................. 390 10.1.2 V0STS--Virtual Channel 0 Resource Status Register ............................... 390 10.1.3 V1CTL--Virtual Channel 1 Resource Control Register .............................. 391 10.1.4 V1STS--Virtual Channel 1 Resource Status Register ............................... 391 10.1.5 CIR0--Chipset Initialization Register 0.................................................. 391 10.1.6 CIR1--Chipset Initialization Register 1.................................................. 392 10.1.7 REC--Root Error Command Register .................................................... 392 10.1.8 ILCL--Internal Link Capabilities List Register ......................................... 392 10.1.9 LCAP--Link Capabilities Register .......................................................... 393 10.1.10 LCTL--Link Control Register ................................................................ 393 10.1.11 LSTS--Link Status Register................................................................. 394 10.1.12 BCR--Backbone Configuration Register................................................. 394 10.1.13 RPC--Root Port Configuration Register ................................................. 394 10.1.14 DMIC--DMI Control Register ............................................................... 396 10.1.15 RPFN--Root Port Function Number and Hide for PCI Express* Root Ports Register .............................................................. 396 10.1.16 FLRSTAT--FLR Pending Status Register ................................................ 397 10.1.17 CIR5--Chipset Initialization Register 5.................................................. 398 10.1.18 TRSR--Trap Status Register................................................................ 398 10.1.19 TRCR--Trapped Cycle Register ............................................................ 398 10.1.20 TWDR--Trapped Write Data Register.................................................... 399 10.1.21 IOTRn--I/O Trap Register (0-3) .......................................................... 399 10.1.22 DMC--DMI Miscellaneous Control Register ............................................ 400 10.1.23 CIR6--Chipset Initialization Register 6.................................................. 400 10.1.24 DMC2--DMI Miscellaneous Control Register 2 ........................................ 400 Datasheet 9 10.1.25 10.1.26 10.1.27 10.1.28 10.1.29 10.1.30 10.1.31 10.1.32 10.1.33 10.1.34 10.1.35 10.1.36 10.1.37 10.1.38 10.1.39 10.1.40 10.1.41 10.1.42 10.1.43 10.1.44 10.1.45 10.1.46 10.1.47 10.1.48 10.1.49 10.1.50 10.1.51 10.1.52 10.1.53 10.1.54 10.1.55 10.1.56 10.1.57 10.1.58 10.1.59 10.1.60 10.1.61 10.1.62 10.1.63 10.1.64 10.1.65 10.1.66 10.1.67 10.1.68 10.1.69 10.1.70 11 10 TCTL--TCO Configuration Register........................................................ 401 D31IP--Device 31 Interrupt Pin Register ............................................... 402 D30IP--Device 30 Interrupt Pin Register ............................................... 403 D29IP--Device 29 Interrupt Pin Register ............................................... 403 D28IP--Device 28 Interrupt Pin Register ............................................... 404 D27IP--Device 27 Interrupt Pin Register ............................................... 405 D26IP--Device 26 Interrupt Pin Register ............................................... 406 D25IP--Device 25 Interrupt Pin Register ............................................... 406 D22IP--Device 22 Interrupt Pin Register ............................................... 407 D31IR--Device 31 Interrupt Route Register ........................................... 407 D30IR--Device 30 Interrupt Route Register ........................................... 408 D29IR--Device 29 Interrupt Route Register ........................................... 409 D28IR--Device 28 Interrupt Route Register ........................................... 410 D27IR--Device 27 Interrupt Route Register ........................................... 411 D26IR--Device 26 Interrupt Route Register ........................................... 412 D25IR--Device 25 Interrupt Route Register ........................................... 413 D24IR--Device 24 Interrupt Route Register ........................................... 414 D22IR--Device 22 Interrupt Route Register ........................................... 415 OIC--Other Interrupt Control Register .................................................. 416 PRSTS--Power and Reset Status .......................................................... 417 CIR7--Chipset Initalization Register 7................................................... 417 CIR8--Chipset Initialization Register 8 .................................................. 418 CIR9--Chipset Initialization Register 9 .................................................. 418 CIR10--Chipset Initialization Register 10 .............................................. 418 CIR13--Chipset Initialization Register 13 .............................................. 418 CIR14--Chipset Initialization Register 14 .............................................. 418 CIR15--Chipset Initialization Register 15 .............................................. 419 CIR16--Chipset Initialization Register 16 .............................................. 419 CIR17--Chipset Initialization Register 17 .............................................. 419 CIR18--Chipset Initialization Register 18 .............................................. 419 CIR19--Chipset Initialization Register 19 .............................................. 419 CIR20--Chipset Initialization Register 20 .............................................. 420 CIR21--Chipset Initialization Register 21 .............................................. 420 CIR22--Chipset Initialization Register 22 .............................................. 420 RC--RTC Configuration Register........................................................... 421 HPTC--High Precision Timer Configuration Register ................................ 421 GCS--General Control and Status Register ............................................ 422 BUC--Backed Up Control Register ........................................................ 424 FD--Function Disable Register ............................................................. 425 CG--Clock Gating Register .................................................................. 427 FDSW--Function Disable SUS Well Register ........................................... 428 FD2--Function Disable 2 Register......................................................... 428 MISCCTL--Miscellaneous Control Register ............................................. 429 USBOCM1--Overcurrent MAP Register 1................................................ 430 USBOCM2--Overcurrent MAP Register 2................................................ 431 RMHWKCTL--Rate Matching Hub Wake Control Register .......................... 432 PCI-to-PCI Bridge Registers (D30:F0).................................................................... 435 11.1 PCI Configuration Registers (D30:F0) ................................................................. 435 11.1.1 VID--Vendor Identification Register (PCI-PCI--D30:F0) .......................... 436 11.1.2 DID--Device Identification Register (PCI-PCI--D30:F0) ........................... 436 11.1.3 PCICMD--PCI Command Register (PCI-PCI--D30:F0).............................. 436 11.1.4 PSTS--PCI Status Register (PCI-PCI--D30:F0) ....................................... 437 11.1.5 RID--Revision Identification Register (PCI-PCI--D30:F0)......................... 439 11.1.6 CC--Class Code Register (PCI-PCI--D30:F0).......................................... 439 11.1.7 PMLT--Primary Master Latency Timer Register (PCI-PCI--D30:F0)............................................................................. 440 11.1.8 HEADTYP--Header Type Register (PCI-PCI--D30:F0) .............................. 440 11.1.9 BNUM--Bus Number Register (PCI-PCI--D30:F0) ................................... 440 11.1.10 SMLT--Secondary Master Latency Timer Register (PCI-PCI--D30:F0)............................................................................. 441 11.1.11 IOBASE_LIMIT--I/O Base and Limit Register (PCI-PCI--D30:F0)............................................................................. 441 11.1.12 SECSTS--Secondary Status Register (PCI-PCI--D30:F0) ......................... 442 11.1.13 MEMBASE_LIMIT--Memory Base and Limit Register (PCI-PCI--D30:F0)............................................................................. 443 Datasheet 11.1.14 11.1.15 11.1.16 11.1.17 11.1.18 11.1.19 11.1.20 11.1.21 11.1.22 11.1.23 11.1.24 11.1.25 12 PREF_MEM_BASE_LIMIT--Prefetchable Memory Base and Limit Register (PCI-PCI--D30:F0) .................................................. 443 PMBU32--Prefetchable Memory Base Upper 32 Bits Register (PCI-PCI--D30:F0) ................................................................ 444 PMLU32--Prefetchable Memory Limit Upper 32 Bits Register (PCI-PCI--D30:F0) ................................................................ 444 CAPP--Capability List Pointer Register (PCI-PCI--D30:F0) ....................... 444 INTR--Interrupt Information Register (PCI-PCI--D30:F0)........................ 444 BCTRL--Bridge Control Register (PCI-PCI--D30:F0) ............................... 445 SPDH--Secondary PCI Device Hiding Register (PCI-PCI--D30:F0) ............................................................................ 447 DTC--Delayed Transaction Control Register (PCI-PCI--D30:F0) ............................................................................ 447 BPS--Bridge Proprietary Status Register (PCI-PCI--D30:F0) ............................................................................ 449 BPC--Bridge Policy Configuration Register (PCI-PCI--D30:F0) ............................................................................ 450 SVCAP--Subsystem Vendor Capability Register (PCI-PCI--D30:F0) ............................................................................ 451 SVID--Subsystem Vendor IDs Register (PCI-PCI--D30:F0) ..................... 451 Gigabit LAN Configuration Registers ...................................................................... 453 12.1 Gigabit LAN Configuration Registers (Gigabit LAN--D25:F0)..................................................................................... 453 12.1.1 VID--Vendor Identification Register (Gigabit LAN--D25:F0)....................................................................... 454 12.1.2 DID--Device Identification Register (Gigabit LAN--D25:F0)....................................................................... 454 12.1.3 PCICMD--PCI Command Register (Gigabit LAN--D25:F0)....................................................................... 455 12.1.4 PCISTS--PCI Status Register (Gigabit LAN--D25:F0)....................................................................... 456 12.1.5 RID--Revision Identification Register (Gigabit LAN--D25:F0)....................................................................... 457 12.1.6 CC--Class Code Register (Gigabit LAN--D25:F0)....................................................................... 457 12.1.7 CLS--Cache Line Size Register (Gigabit LAN--D25:F0)....................................................................... 457 12.1.8 PLT--Primary Latency Timer Register (Gigabit LAN--D25:F0)....................................................................... 457 12.1.9 HT--Header Type Register (Gigabit LAN--D25:F0)....................................................................... 457 12.1.10 MBARA--Memory Base Address Register A (Gigabit LAN--D25:F0)....................................................................... 458 12.1.11 MBARB--Memory Base Address Register B (Gigabit LAN--D25:F0)....................................................................... 458 12.1.12 MBARC--Memory Base Address Register C (Gigabit LAN--D25:F0)....................................................................... 459 12.1.13 SVID--Subsystem Vendor ID Register (Gigabit LAN--D25:F0)....................................................................... 459 12.1.14 SID--Subsystem ID Register (Gigabit LAN--D25:F0)....................................................................... 459 12.1.15 ERBA--Expansion ROM Base Address Register (Gigabit LAN--D25:F0)....................................................................... 459 12.1.16 CAPP--Capabilities List Pointer Register (Gigabit LAN--D25:F0)....................................................................... 460 12.1.17 INTR--Interrupt Information Register (Gigabit LAN--D25:F0)....................................................................... 460 12.1.18 MLMG--Maximum Latency/Minimum Grant Register (Gigabit LAN--D25:F0)....................................................................... 460 12.1.19 CLIST 1--Capabilities List Register 1 (Gigabit LAN--D25:F0)....................................................................... 460 12.1.20 PMC--PCI Power Management Capabilities Register (Gigabit LAN--D25:F0)....................................................................... 461 12.1.21 PMCS--PCI Power Management Control and Status Register (Gigabit LAN--D25:F0) .......................................................... 462 Datasheet 11 12.1.22 12.1.23 12.1.24 12.1.25 12.1.26 12.1.27 12.1.28 12.1.29 12.1.30 13 12 DR--Data Register (Gigabit LAN--D25:F0) ....................................................................... 463 CLIST 2--Capabilities List Register 2 (Gigabit LAN--D25:F0) ....................................................................... 463 MCTL--Message Control Register (Gigabit LAN--D25:F0) ....................................................................... 463 MADDL--Message Address Low Register (Gigabit LAN--D25:F0) ....................................................................... 464 MADDH--Message Address High Register (Gigabit LAN--D25:F0) ....................................................................... 464 MDAT--Message Data Register (Gigabit LAN--D25:F0) ....................................................................... 464 FLRCAP--Function Level Reset Capability (Gigabit LAN--D25:F0) ....................................................................... 464 FLRCLV--Function Level Reset Capability Length and Version (Gigabit LAN--D25:F0) ....................................................................... 465 DEVCTRL--Device Control (Gigabit LAN--D25:F0) .................................. 465 LPC Interface Bridge Registers (D31:F0) ............................................................... 467 13.1 PCI Configuration Registers (LPC I/F--D31:F0) .................................................... 467 13.1.1 VID--Vendor Identification Register (LPC I/F--D31:F0) ........................... 468 13.1.2 DID--Device Identification Register (LPC I/F--D31:F0)............................ 468 13.1.3 PCICMD--PCI COMMAND Register (LPC I/F--D31:F0).............................. 469 13.1.4 PCISTS--PCI Status Register (LPC I/F--D31:F0) .................................... 470 13.1.5 RID--Revision Identification Register (LPC I/F--D31:F0) ......................... 471 13.1.6 PI--Programming Interface Register (LPC I/F--D31:F0) .......................... 471 13.1.7 SCC--Sub Class Code Register (LPC I/F--D31:F0) .................................. 471 13.1.8 BCC--Base Class Code Register (LPC I/F--D31:F0) ................................. 471 13.1.9 PLT--Primary Latency Timer Register (LPC I/F--D31:F0) ......................... 471 13.1.10 HEADTYP--Header Type Register (LPC I/F--D31:F0) ............................... 472 13.1.11 SS--Sub System Identifiers Register (LPC I/F--D31:F0) .......................... 472 13.1.12 CAPP--Capability List Pointer Register (LPC I/F--D31:F0) ........................ 472 13.1.13 PMBASE--ACPI Base Address Register (LPC I/F--D31:F0)........................ 472 13.1.14 ACPI_CNTL--ACPI Control Register (LPC I/F--D31:F0) ............................ 473 13.1.15 GPIOBASE--GPIO Base Address Register (LPC I/F--D31:F0) ............................................................................. 473 13.1.16 GC--GPIO Control Register (LPC I/F--D31:F0) ....................................... 474 13.1.17 PIRQ[n]_ROUT--PIRQ[A,B,C,D] Routing Control Register (LPC I/F--D31:F0) ............................................................................. 475 13.1.18 SIRQ_CNTL--Serial IRQ Control Register (LPC I/F--D31:F0) ............................................................................. 476 13.1.19 PIRQ[n]_ROUT--PIRQ[E,F,G,H] Routing Control Register (LPC I/F--D31:F0) ............................................................................. 477 13.1.20 LPC_IBDF--IOxAPIC Bus:Device:Function Register (LPC I/F--D31:F0) ............................................................................. 477 13.1.21 LPC_HnBDF--HPET n Bus:Device:Function Register (LPC I/F--D31:F0) ............................................................................. 478 13.1.22 LPC_I/O_DEC--I/O Decode Ranges Register (LPC I/F--D31:F0) ............................................................................. 479 13.1.23 LPC_EN--LPC I/F Enables Register (LPC I/F--D31:F0) ............................. 480 13.1.24 GEN1_DEC--LPC I/F Generic Decode Range 1 Register (LPC I/F--D31:F0) ............................................................................. 481 13.1.25 GEN2_DEC--LPC I/F Generic Decode Range 2 Register (LPC I/F--D31:F0) ............................................................................. 481 13.1.26 GEN3_DEC--LPC I/F Generic Decode Range 3 Register (LPC I/F--D31:F0) ............................................................................. 482 13.1.27 GEN4_DEC--LPC I/F Generic Decode Range 4 Register (LPC I/F--D31:F0) ............................................................................. 482 13.1.28 ULKMC--USB Legacy Keyboard / Mouse Control Register (LPC I/F--D31:F0) ................................................................ 483 13.1.29 LGMR--LPC I/F Generic Memory Range Register (LPC I/F--D31:F0) ............................................................................. 484 13.1.30 FWH_SEL1--Firmware Hub Select 1 Register (LPC I/F--D31:F0) ............................................................................. 485 13.1.31 FWH_SEL2--Firmware Hub Select 2 Register (LPC I/F--D31:F0) ............................................................................. 486 Datasheet 13.1.32 13.2 13.3 13.4 13.5 13.6 13.7 Datasheet FWH_DEC_EN1--Firmware Hub Decode Enable Register (LPC I/F--D31:F0) ................................................................ 487 13.1.33 BIOS_CNTL--BIOS Control Register (LPC I/F--D31:F0)............................................................................. 489 13.1.34 FDCAP--Feature Detection Capability ID Register (LPC I/F--D31:F0)................................................................ 490 13.1.35 FDLEN--Feature Detection Capability Length Register (LPC I/F--D31:F0)................................................................ 490 13.1.36 FDVER--Feature Detection Version Register (LPC I/F--D31:F0)................................................................ 490 13.1.37 FDVCT--Feature Vector Register (LPC I/F--D31:F0)............................................................................. 491 13.1.38 RCBA--Root Complex Base Address Register (LPC I/F--D31:F0)............................................................................. 491 DMA I/O Registers........................................................................................... 492 13.2.1 DMABASE_CA--DMA Base and Current Address Registers ....................... 493 13.2.2 DMABASE_CC--DMA Base and Current Count Registers .......................... 494 13.2.3 DMAMEM_LP--DMA Memory Low Page Registers.................................... 494 13.2.4 DMACMD--DMA Command Register ..................................................... 495 13.2.5 DMASTA--DMA Status Register ........................................................... 495 13.2.6 DMA_WRSMSK--DMA Write Single Mask Register .................................. 496 13.2.7 DMACH_MODE--DMA Channel Mode Register ........................................ 497 13.2.8 DMA Clear Byte Pointer Register.......................................................... 498 13.2.9 DMA Master Clear Register ................................................................. 498 13.2.10 DMA_CLMSK--DMA Clear Mask Register ............................................... 498 13.2.11 DMA_WRMSK--DMA Write All Mask Register ......................................... 499 Timer I/O Registers ......................................................................................... 499 13.3.1 TCW--Timer Control Word Register...................................................... 500 13.3.2 SBYTE_FMT--Interval Timer Status Byte Format Register ....................... 502 13.3.3 Counter Access Ports Register ............................................................. 503 8259 Interrupt Controller (PIC) Registers ........................................................... 503 13.4.1 Interrupt Controller I/O MAP ............................................................... 503 13.4.2 ICW1--Initialization Command Word 1 Register..................................... 504 13.4.3 ICW2--Initialization Command Word 2 Register..................................... 505 13.4.4 ICW3--Master Controller Initialization Command Word 3 Register ................................................................................ 505 13.4.5 ICW3--Slave Controller Initialization Command Word 3 Register ................................................................................ 506 13.4.6 ICW4--Initialization Command Word 4 Register..................................... 506 13.4.7 OCW1--Operational Control Word 1 (Interrupt Mask) Register ........................................................................................... 507 13.4.8 OCW2--Operational Control Word 2 Register ......................................... 507 13.4.9 OCW3--Operational Control Word 3 Register ......................................... 508 13.4.10 ELCR1--Master Controller Edge/Level Triggered Register ........................ 509 13.4.11 ELCR2--Slave Controller Edge/Level Triggered Register .......................... 510 Advanced Programmable Interrupt Controller (APIC)............................................ 511 13.5.1 APIC Register Map............................................................................. 511 13.5.2 IND--Index Register .......................................................................... 511 13.5.3 DAT--Data Register ........................................................................... 512 13.5.4 EOIR--EOI Register ........................................................................... 512 13.5.5 ID--Identification Register .................................................................. 513 13.5.6 VER--Version Register ....................................................................... 513 13.5.7 REDIR_TBL--Redirection Table ............................................................ 514 Real Time Clock Registers................................................................................. 516 13.6.1 I/O Register Address Map ................................................................... 516 13.6.2 Indexed Registers ............................................................................. 517 13.6.2.1 RTC_REGA--Register A ........................................................ 518 13.6.2.2 RTC_REGB--Register B (General Configuration)....................... 519 13.6.2.3 RTC_REGC--Register C (Flag Register) ................................... 520 13.6.2.4 RTC_REGD--Register D (Flag Register) .................................. 520 Processor Interface Registers ............................................................................ 521 13.7.1 NMI_SC--NMI Status and Control Register............................................ 521 13.7.2 NMI_EN--NMI Enable (and Real Time Clock Index) Register ........................................................................................... 522 13.7.3 PORT92--Fast A20 and Init Register .................................................... 522 13.7.4 COPROC_ERR--Coprocessor Error Register ........................................... 522 13.7.5 RST_CNT--Reset Control Register........................................................ 523 13 13.8 Power Management Registers (PM--D31:F0) ....................................................... 524 13.8.1 Power Management PCI Configuration Registers (PM--D31:F0) ................................................................................... 524 13.8.1.1 GEN_PMCON_1--General PM Configuration 1 Register (PM--D31:F0) ..................................................................... 524 13.8.1.2 GEN_PMCON_2--General PM Configuration 2 Register (PM--D31:F0) ..................................................................... 525 13.8.1.3 GEN_PMCON_3--General PM Configuration 3 Register (PM--D31:F0) ..................................................................... 527 13.8.1.4 GEN_PMCON_LOCK--General Power Management Configuration Lock Register ...................................................................... 529 13.8.1.5 Chipset Initialization Register 4 (PM--D31:F0) ......................... 530 13.8.1.6 BM_BREAK_EN Register (PM--D31:F0) ................................... 530 13.8.1.7 PMIR--Power Management Initialization Register (PM--D31:F0) . 531 13.8.1.8 GPIO_ROUT--GPIO Routing Control Register (PM--D31:F0) ..................................................................... 531 13.8.2 APM I/O Decode ................................................................................ 531 13.8.2.1 APM_CNT--Advanced Power Management Control Port Register . 532 13.8.2.2 APM_STS--Advanced Power Management Status Port Register... 532 13.8.3 Power Management I/O Registers ........................................................ 532 13.8.3.1 PM1_STS--Power Management 1 Status Register ..................... 533 13.8.3.2 PM1_EN--Power Management 1 Enable Register ...................... 536 13.8.3.3 PM1_CNT--Power Management 1 Control Register.................... 537 13.8.3.4 PM1_TMR--Power Management 1 Timer Register ..................... 538 13.8.3.5 PM1_TMR--Power Management 1 Timer Register ..................... 538 13.8.3.6 GPE0_STS--General Purpose Event 0 Status Register ............... 539 13.8.3.7 GPE0_EN--General Purpose Event 0 Enables Register ............... 541 13.8.3.8 SMI_EN--SMI Control and Enable Register .............................. 543 13.8.3.9 SMI_STS--SMI Status Register .............................................. 545 13.8.3.10 ALT_GP_SMI_EN--Alternate GPI SMI Enable Register ............... 547 13.8.3.11 ALT_GP_SMI_STS--Alternate GPI SMI Status Register .............. 548 13.8.3.12 UPRWC--USB Per-Port Registers Write Control......................... 548 13.8.3.13 GPE_CNTL--General Purpose Control Register ......................... 549 13.8.3.14 DEVACT_STS--Device Activity Status Register ......................... 550 13.8.3.15 PM2_CNT--Power Management 2 Control Register.................... 550 13.9 System Management TCO Registers ................................................................... 551 13.9.1 TCO_RLD--TCO Timer Reload and Current Value Register ....................... 551 13.9.2 TCO_DAT_IN--TCO Data In Register .................................................... 552 13.9.3 TCO_DAT_OUT--TCO Data Out Register................................................ 552 13.9.4 TCO1_STS--TCO1 Status Register........................................................ 552 13.9.5 TCO2_STS--TCO2 Status Register........................................................ 554 13.9.6 TCO1_CNT--TCO1 Control Register ...................................................... 555 13.9.7 TCO2_CNT--TCO2 Control Register ...................................................... 556 13.9.8 TCO_MESSAGE1 and TCO_MESSAGE2 Registers .................................... 556 13.9.9 TCO_WDCNT--TCO Watchdog Control Register ...................................... 557 13.9.10 SW_IRQ_GEN--Software IRQ Generation Register.................................. 557 13.9.11 TCO_TMR--TCO Timer Initial Value Register .......................................... 557 13.10 General Purpose I/O Registers ........................................................................... 558 13.10.1 GPIO_USE_SEL--GPIO Use Select Register............................................ 559 13.10.2 GP_IO_SEL--GPIO Input/Output Select Register .................................... 559 13.10.3 GP_LVL--GPIO Level for Input or Output Register .................................. 560 13.10.4 GPO_BLINK--GPO Blink Enable Register................................................ 560 13.10.5 GP_SER_BLINK--GP Serial Blink Register .............................................. 561 13.10.6 GP_SB_CMDSTS--GP Serial Blink Command Status Register.................................................................................. 562 13.10.7 GP_SB_DATA--GP Serial Blink Data Register ......................................... 562 13.10.8 GPI_NMI_EN--GPI NMI Enable Register ................................................ 563 13.10.9 GPI_NMI_STS--GPI NMI Status Register ............................................... 563 13.10.10 GPI_INV--GPIO Signal Invert Register .................................................. 563 13.10.11 GPIO_USE_SEL2--GPIO Use Select 2 Register ....................................... 564 13.10.12 GP_IO_SEL2--GPIO Input/Output Select 2 Register ................................ 564 13.10.13 GP_LVL2--GPIO Level for Input or Output 2 Register .............................. 565 13.10.14 GPIO_USE_SEL3--GPIO Use Select 3 Register ....................................... 566 13.10.15 GP_IO_SEL3--GPIO Input/Output Select 3 Register ................................ 567 13.10.16 GP_LVL3--GPIO Level for Input or Output 3 Register .............................. 568 13.10.17 GP_RST_SEL1--GPIO Reset Select Register ........................................... 569 13.10.18 GP_RST_SEL2--GPIO Reset Select Register ........................................... 569 14 Datasheet 13.10.19 GP_RST_SEL3--GPIO Reset Select Register .......................................... 570 14 SATA Controller Registers (D31:F2)....................................................................... 571 14.1 PCI Configuration Registers (SATA-D31:F2)........................................................ 571 14.1.1 VID--Vendor Identification Register (SATA--D31:F2) ............................. 573 14.1.2 DID--Device Identification Register (SATA--D31:F2) .............................. 573 14.1.3 PCICMD--PCI Command Register (SATA-D31:F2).................................. 573 14.1.4 PCISTS--PCI Status Register (SATA-D31:F2)........................................ 574 14.1.5 RID--Revision Identification Register (SATA--D31:F2)............................ 575 14.1.6 PI--Programming Interface Register (SATA-D31:F2).............................. 575 14.1.6.1 When Sub Class Code Register (D31:F2:Offset 0Ah) = 01h ....... 575 14.1.6.2 When Sub Class Code Register (D31:F2:Offset 0Ah) = 04h ....... 576 14.1.6.3 When Sub Class Code Register (D31:F2:Offset 0Ah) = 06h ....... 576 14.1.7 SCC--Sub Class Code Register (SATA-D31:F2) ..................................... 576 14.1.8 BCC--Base Class Code Register (SATA-D31:F2SATA-D31:F2) ............................................................. 577 14.1.9 PMLT--Primary Master Latency Timer Register (SATA-D31:F2) ................................................................................ 577 14.1.10 HTYPE--Header Type Register (SATA-D31:F2) ................................................................................ 577 14.1.11 PCMD_BAR--Primary Command Block Base Address Register (SATA-D31:F2) .................................................................... 577 14.1.12 PCNL_BAR--Primary Control Block Base Address Register (SATA-D31:F2) .................................................................... 578 14.1.13 SCMD_BAR--Secondary Command Block Base Address Register (IDE D31:F2) ....................................................................... 578 14.1.14 SCNL_BAR--Secondary Control Block Base Address Register (IDE D31:F2) ....................................................................... 578 14.1.15 BAR--Legacy Bus Master Base Address Register (SATA-D31:F2) ................................................................................ 579 14.1.16 ABAR/SIDPBA1--AHCI Base Address Register/Serial ATA Index Data Pair Base Address (SATA-D31:F2) ...................................... 579 14.1.16.1 When SCC is not 01h ........................................................... 579 14.1.16.2 When SCC is 01h ................................................................ 580 14.1.17 SVID--Subsystem Vendor Identification Register (SATA-D31:F2) ................................................................................ 580 14.1.18 SID--Subsystem Identification Register (SATA-D31:F2) ......................... 580 14.1.19 CAP--Capabilities Pointer Register (SATA-D31:F2)................................. 580 14.1.20 INT_LN--Interrupt Line Register (SATA-D31:F2) ................................... 581 14.1.21 INT_PN--Interrupt Pin Register (SATA-D31:F2)..................................... 581 14.1.22 IDE_TIM--IDE Timing Register (SATA-D31:F2) ..................................... 581 14.1.23 SIDETIM--Slave IDE Timing Register (SATA-D31:F2)............................. 582 14.1.24 SDMA_CNT--Synchronous DMA Control Register (SATA-D31:F2) ................................................................................ 582 14.1.25 SDMA_TIM--Synchronous DMA Timing Register (SATA-D31:F2) ................................................................................ 582 14.1.26 IDE_CONFIG--IDE I/O Configuration Register (SATA-D31:F2) ................................................................................ 583 14.1.27 PID--PCI Power Management Capability Identification Register (SATA-D31:F2) .................................................................... 583 14.1.28 PC--PCI Power Management Capabilities Register (SATA-D31:F2) ................................................................................ 584 14.1.29 PMCS--PCI Power Management Control and Status Register (SATA-D31:F2) .................................................................... 585 14.1.30 MSICI--Message Signaled Interrupt Capability Identification Register (SATA-D31:F2) ................................................. 586 14.1.31 MSIMC--Message Signaled Interrupt Message Control Register (SATA-D31:F2) ......................................................... 586 14.1.32 MSIMA--Message Signaled Interrupt Message Address Register (SATA-D31:F2) ........................................................ 588 14.1.33 MSIMD--Message Signaled Interrupt Message Data Register (SATA-D31:F2)............................................................. 588 14.1.34 MAP--Address Map Register (SATA-D31:F2) ......................................... 589 14.1.35 PCS--Port Control and Status Register (SATA-D31:F2)........................... 590 14.1.36 SCLKCG--SATA Clock Gating Control Register ....................................... 592 14.1.37 SCLKGC--SATA Clock General Configuration Register ............................. 593 14.1.38 SIRI--SATA Indexed Registers Index Register ....................................... 594 Datasheet 15 14.1.39 14.1.40 14.2 14.3 14.4 15 16 FLRCID--FLR Capability ID Register (SATA-D31:F2) ............................... 594 FLRCLV--FLR Capability Length and Version Register (SATA-D31:F2).................................................................... 595 14.1.41 FLRC--FLR Control Register (SATA-D31:F2) .......................................... 595 14.1.42 ATC--APM Trapping Control Register (SATA-D31:F2).............................. 596 14.1.43 ATS--APM Trapping Status Register (SATA-D31:F2)............................... 596 14.1.44 SP Scratch Pad Register (SATA-D31:F2) ............................................... 596 14.1.45 BFCS--BIST FIS Control/Status Register (SATA-D31:F2) ........................ 597 14.1.46 BFTD1--BIST FIS Transmit Data1 Register (SATA-D31:F2) ..................... 599 14.1.47 BFTD2--BIST FIS Transmit Data2 Register (SATA-D31:F2) ..................... 599 Bus Master IDE I/O Registers (D31:F2)............................................................... 600 14.2.1 BMIC[P,S]--Bus Master IDE Command Register (D31:F2) ....................... 601 14.2.2 BMIS[P,S]--Bus Master IDE Status Register (D31:F2)............................. 602 14.2.3 BMID[P,S]--Bus Master IDE Descriptor Table Pointer Register (D31:F2).............................................................................. 603 14.2.4 AIR--AHCI Index Register (D31:F2) ..................................................... 603 14.2.5 AIDR--AHCI Index Data Register (D31:F2)............................................ 603 Serial ATA Index/Data Pair Superset Registers..................................................... 604 14.3.1 SINDX--Serial ATA Index Register (D31:F2) .......................................... 604 14.3.2 SDATA--Serial ATA Data Register (D31:F2) ........................................... 605 14.3.2.1 PxSSTS--Serial ATA Status Register (D31:F2) ......................... 605 14.3.2.2 PxSCTL--Serial ATA Control Register (D31:F2) ........................ 606 14.3.2.3 PxSERR--Serial ATA Error Register (D31:F2) ........................... 607 AHCI Registers (D31:F2) .................................................................................. 608 14.4.1 AHCI Generic Host Control Registers (D31:F2)....................................... 609 14.4.1.1 CAP--Host Capabilities Register (D31:F2) ............................... 609 14.4.1.2 GHC--Global PCH Control Register (D31:F2)............................ 611 14.4.1.3 IS--Interrupt Status Register (D31:F2)................................... 612 14.4.1.4 PI--Ports Implemented Register (D31:F2)............................... 613 14.4.1.5 VS--AHCI Version Register (D31:F2) ...................................... 614 14.4.1.6 CCC_CTL--Command Completion Coalescing Control Register (D31:F2)................................................................ 614 14.4.1.7 CCC_Ports--Command Completion Coalescing Ports Register (D31:F2)................................................................ 615 14.4.1.8 EM_LOC--Enclosure Management Location Register (D31:F2) .... 615 14.4.1.9 EM_CTRL--Enclosure Management Control Register (D31:F2) .... 616 14.4.1.10 VS--AHCI Version Register (D31:F2) ...................................... 617 14.4.1.11 VSP--Vendor Specific Register (D31:F2) ................................. 617 14.4.1.12 RSTF--Intel(R) RST Feature Capabilities Register ....................... 617 14.4.2 Port Registers (D31:F2)...................................................................... 619 14.4.2.1 PxCLB--Port [5:0] Command List Base Address Register (D31:F2) ............................................................................ 623 14.4.2.2 PxCLBU--Port [5:0] Command List Base Address Upper 32-Bits Register (D31:F2) ..................................................... 623 14.4.2.3 PxFB--Port [5:0] FIS Base Address Register (D31:F2) .............. 624 14.4.2.4 PxFBU--Port [5:0] FIS Base Address Upper 32-Bits Register (D31:F2)................................................................ 624 14.4.2.5 PxIS--Port [5:0] Interrupt Status Register (D31:F2)................. 625 14.4.2.6 PxIE--Port [5:0] Interrupt Enable Register (D31:F2) ................ 626 14.4.2.7 PxCMD--Port [5:0] Command Register (D31:F2)...................... 628 14.4.2.8 PxTFD--Port [5:0] Task File Data Register (D31:F2) ................. 631 14.4.2.9 PxSIG--Port [5:0] Signature Register (D31:F2) ....................... 631 14.4.2.10 PxSSTS--Port [5:0] Serial ATA Status Register (D31:F2) .......... 632 14.4.2.11 PxSCTL--Port [5:0] Serial ATA Control Register (D31:F2).......... 633 14.4.2.12 PxSERR--Port [5:0] Serial ATA Error Register (D31:F2) ............ 634 14.4.2.13 PxSACT--Port [5:0] Serial ATA Active Register (D31:F2) ........... 635 14.4.2.14 PxCI--Port [5:0] Command Issue Register (D31:F2) ................ 636 SATA Controller Registers (D31:F5) ....................................................................... 637 15.1 PCI Configuration Registers (SATA-D31:F5) ........................................................ 637 15.1.1 VID--Vendor Identification Register (SATA--D31:F5) .............................. 638 15.1.2 DID--Device Identification Register (SATA--D31:F5) .............................. 638 15.1.3 PCICMD--PCI Command Register (SATA-D31:F5) .................................. 639 15.1.4 PCISTS--PCI Status Register (SATA-D31:F5) ........................................ 640 15.1.5 RID--Revision Identification Register (SATA--D31:F5) ............................ 640 15.1.6 PI--Programming Interface Register (SATA-D31:F5) .............................. 641 15.1.7 SCC--Sub Class Code Register (SATA-D31:F5) ...................................... 641 Datasheet 15.1.8 15.2 15.3 16 BCC--Base Class Code Register (SATA-D31:F5SATA-D31:F5) ............................................................. 641 15.1.9 PMLT--Primary Master Latency Timer Register (SATA-D31:F5) ................................................................................ 642 15.1.10 PCMD_BAR--Primary Command Block Base Address Register (SATA-D31:F5) .................................................................... 642 15.1.11 PCNL_BAR--Primary Control Block Base Address Register (SATA-D31:F5) ................................................................................ 642 15.1.12 SCMD_BAR--Secondary Command Block Base Address Register (IDE D31:F5) ....................................................................... 643 15.1.13 SCNL_BAR--Secondary Control Block Base Address Register (IDE D31:F5) ....................................................................... 643 15.1.14 BAR--Legacy Bus Master Base Address Register (SATA-D31:F5) ................................................................................ 644 15.1.15 SIDPBA--SATA Index/Data Pair Base Address Register (SATA-D31:F5) ................................................................................ 644 15.1.16 SVID--Subsystem Vendor Identification Register (SATA-D31:F5) ................................................................................ 645 15.1.17 SID--Subsystem Identification Register (SATA-D31:F5) ......................... 645 15.1.18 CAP--Capabilities Pointer Register (SATA-D31:F5)................................. 645 15.1.19 INT_LN--Interrupt Line Register (SATA-D31:F5) ................................... 645 15.1.20 INT_PN--Interrupt Pin Register (SATA-D31:F5)..................................... 645 15.1.21 IDE_TIM--IDE Timing Register (SATA-D31:F5) ..................................... 646 15.1.22 SDMA_CNT--Synchronous DMA Control Register (SATA-D31:F5) ................................................................................ 646 15.1.23 SDMA_TIM--Synchronous DMA Timing Register (SATA-D31:F5) ................................................................................ 647 15.1.24 IDE_CONFIG--IDE I/O Configuration Register (SATA-D31:F5) ................................................................................ 647 15.1.25 PID--PCI Power Management Capability Identification Register (SATA-D31:F5) .................................................................... 648 15.1.26 PC--PCI Power Management Capabilities Register (SATA-D31:F5) ................................................................................ 648 15.1.27 PMCS--PCI Power Management Control and Status Register (SATA-D31:F5) .................................................................... 649 15.1.28 MAP--Address Map Register (SATA-D31:F5) ......................................... 650 15.1.29 PCS--Port Control and Status Register (SATA-D31:F5)........................... 651 15.1.30 SATACR0--SATA Capability Register 0 (SATA-D31:F5) ........................... 652 15.1.31 SATACR1--SATA Capability Register 1 (SATA-D31:F5) ........................... 652 15.1.32 FLRCID--FLR Capability ID Register (SATA-D31:F5) .............................. 652 15.1.33 FLRCLV--FLR Capability Length and Value Register (SATA-D31:F5) .................................................................... 653 15.1.34 FLRCTRL--FLR Control Register (SATA-D31:F5) .................................... 653 15.1.35 ATC--APM Trapping Control Register (SATA-D31:F5) ............................. 654 15.1.36 ATC--APM Trapping Control Register (SATA-D31:F5) ............................. 654 Bus Master IDE I/O Registers (D31:F5) .............................................................. 655 15.2.1 BMIC[P,S]--Bus Master IDE Command Register (D31:F5) ....................... 656 15.2.2 BMIS[P,S]--Bus Master IDE Status Register (D31:F5) ............................ 657 15.2.3 BMID[P,S]--Bus Master IDE Descriptor Table Pointer Register (D31:F5) ............................................................................. 657 Serial ATA Index/Data Pair Superset Registers .................................................... 658 15.3.1 SINDX--SATA Index Register (D31:F5) ................................................ 658 15.3.2 SDATA--SATA Index Data Register (D31:F5) ........................................ 658 15.3.2.1 PxSSTS--Serial ATA Status Register (D31:F5)......................... 659 15.3.2.2 PxSCTL--Serial ATA Control Register (D31:F5) ........................ 660 15.3.2.3 PxSERR--Serial ATA Error Register (D31:F5)........................... 661 EHCI Controller Registers (D29:F0, D26:F0) .......................................................... 663 16.1 USB EHCI Configuration Registers (USB EHCI--D29:F0, D26:F0) ........................................................................... 663 16.1.1 VID--Vendor Identification Register (USB EHCI--D29:F0, D26:F0) ............................................................. 664 16.1.2 DID--Device Identification Register (USB EHCI--D29:F0, D26:F0) ............................................................. 665 16.1.3 PCICMD--PCI Command Register (USB EHCI--D29:F0, D26:F0) ............................................................. 665 Datasheet 17 16.1.4 16.1.5 16.1.6 16.1.7 16.1.8 16.1.9 16.1.10 16.1.11 16.1.12 16.1.13 16.1.14 16.1.15 16.1.16 16.1.17 16.1.18 16.1.19 16.1.20 16.1.21 16.1.22 16.1.23 16.1.24 16.1.25 16.1.26 16.1.27 16.1.28 16.1.29 16.1.30 16.1.31 16.1.32 16.1.33 16.1.34 16.1.35 16.1.36 16.1.37 18 PCISTS--PCI Status Register (USB EHCI--D29:F0, D26:F0).............................................................. 666 RID--Revision Identification Register (USB EHCI--D29:F0, D26:F0).............................................................. 667 PI--Programming Interface Register (USB EHCI--D29:F0, D26:F0).............................................................. 667 SCC--Sub Class Code Register (USB EHCI--D29:F0, D26:F0).............................................................. 667 BCC--Base Class Code Register (USB EHCI--D29:F0, D26:F0).............................................................. 668 PMLT--Primary Master Latency Timer Register (USB EHCI--D29:F0, D26:F0).............................................................. 668 HEADTYP--Header Type Register (USB EHCI--D29:F0, D26:F0).............................................................. 668 MEM_BASE--Memory Base Address Register (USB EHCI--D29:F0, D26:F0).............................................................. 669 SVID--USB EHCI Subsystem Vendor ID Register (USB EHCI--D29:F0, D26:F0).............................................................. 669 SID--USB EHCI Subsystem ID Register (USB EHCI--D29:F0, D26:F0).............................................................. 669 CAP_PTR--Capabilities Pointer Register (USB EHCI--D29:F0, D26:F0).............................................................. 670 INT_LN--Interrupt Line Register (USB EHCI--D29:F0, D26:F0).............................................................. 670 INT_PN--Interrupt Pin Register (USB EHCI--D29:F0, D26:F0).............................................................. 670 PWR_CAPID--PCI Power Management Capability ID Register (USB EHCI--D29:F0, D26:F0) ................................................. 670 NXT_PTR1--Next Item Pointer #1 Register (USB EHCI--D29:F0, D26:F0).............................................................. 671 PWR_CAP--Power Management Capabilities Register (USB EHCI--D29:F0, D26:F0).............................................................. 671 PWR_CNTL_STS--Power Management Control/ Status Register (USB EHCI--D29:F0, D26:F0) ....................................... 672 DEBUG_CAPID--Debug Port Capability ID Register (USB EHCI--D29:F0, D26:F0).............................................................. 673 NXT_PTR2--Next Item Pointer #2 Register (USB EHCI--D29:F0, D26:F0).............................................................. 673 DEBUG_BASE--Debug Port Base Offset Register (USB EHCI--D29:F0, D26:F0).............................................................. 673 USB_RELNUM--USB Release Number Register (USB EHCI--D29:F0, D26:F0).............................................................. 673 FL_ADJ--Frame Length Adjustment Register (USB EHCI--D29:F0, D26:F0).............................................................. 674 PWAKE_CAP--Port Wake Capability Register (USB EHCI--D29:F0, D26:F0).............................................................. 675 LEG_EXT_CAP--USB EHCI Legacy Support Extended Capability Register (USB EHCI--D29:F0, D26:F0)................................... 676 LEG_EXT_CS--USB EHCI Legacy Support Extended Control / Status Register (USB EHCI--D29:F0, D26:F0) .......................... 677 SPECIAL_SMI--Intel Specific USB 2.0 SMI Register (USB EHCI--D29:F0, D26:F0).............................................................. 679 ACCESS_CNTL--Access Control Register (USB EHCI--D29:F0, D26:F0).............................................................. 680 EHCIIR1--EHCI Initialization Register 1 (USB EHCI--D29:F0, D26:F0).............................................................. 681 EHCIIR2--EHCI Initialization Register 2 (USB EHCI--D29:F0, D26:F0) ...... 681 FLR_CID--Function Level Reset Capability ID Register (USB EHCI--D29:F0, D26:F0) ................................................ 682 FLR_NEXT--Function Level Reset Next Capability Pointer Register (USB EHCI--D29:F0, D26:F0) ................................................ 682 FLR_CLV--Function Level Reset Capability Length and Version Register (USB EHCI--D29:F0, D26:F0) ...................................... 683 FLR_CTRL--Function Level Reset Control Register (USB EHCI--D29:F0, D26:F0).............................................................. 683 FLR_STS--Function Level Reset Status Register (USB EHCI--D29:F0, D26:F0).............................................................. 684 Datasheet 16.2 17 16.1.38 EHCIIR3--EHCI Initialization Register 3 (USB EHCI--D29:F0, D26:F0) ...... 684 16.1.39 EHCIIR4--EHCI Initialization Register 4 (USB EHCI--D29:F0, D26:F0) ...... 684 Memory-Mapped I/O Registers .......................................................................... 685 16.2.1 Host Controller Capability Registers ..................................................... 685 16.2.1.1 CAPLENGTH--Capability Registers Length Register................... 686 16.2.1.2 HCIVERSION--Host Controller Interface Version Number Register ............................................................................. 686 16.2.1.3 HCSPARAMS--Host Controller Structural Parameters Register.... 686 16.2.1.4 HCCPARAMS--Host Controller Capability Parameters Register ............................................................................. 687 16.2.2 Host Controller Operational Registers ................................................... 688 16.2.2.1 USB2.0_CMD--USB 2.0 Command Register............................. 689 16.2.2.2 USB2.0_STS--USB 2.0 Status Register................................... 692 16.2.2.3 USB2.0_INTR--USB 2.0 Interrupt Enable Register ................... 694 16.2.2.4 FRINDEX--Frame Index Register ........................................... 695 16.2.2.5 CTRLDSSEGMENT--Control Data Structure Segment Register ............................................................................. 695 16.2.2.6 PERIODICLISTBASE--Periodic Frame List Base Address Register ............................................................................. 696 16.2.2.7 ASYNCLISTADDR--Current Asynchronous List Address Register ............................................................................. 696 16.2.2.8 CONFIGFLAG--Configure Flag Register ................................... 697 16.2.2.9 PORTSC--Port N Status and Control Register .......................... 697 16.2.3 USB 2.0-Based Debug Port Registers ................................................... 701 16.2.3.1 CNTL_STS--Control/Status Register....................................... 702 16.2.3.2 USBPID--USB PIDs Register ................................................. 704 16.2.3.3 DATABUF[7:0]--Data Buffer Bytes[7:0] Register ..................... 704 16.2.3.4 CONFIG--Configuration Register............................................ 704 Intel(R) High Definition Audio Controller Registers (D27:F0) ................................... 705 17.1 Intel(R) High Definition Audio PCI Configuration Space (Intel(R) High Definition Audio--D27:F0) ..................................................... 705 17.1.1 VID--Vendor Identification Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 707 17.1.2 DID--Device Identification Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 707 17.1.3 PCICMD--PCI Command Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 708 17.1.4 PCISTS--PCI Status Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 709 17.1.5 RID--Revision Identification Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 710 17.1.6 PI--Programming Interface Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 710 17.1.7 SCC--Sub Class Code Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 710 17.1.8 BCC--Base Class Code Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 710 17.1.9 CLS--Cache Line Size Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 710 17.1.10 LT--Latency Timer Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 711 17.1.11 HEADTYP--Header Type Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 711 17.1.12 HDBARL--Intel(R) High Definition Audio Lower Base Address Register (Intel(R) High Definition Audio--D27:F0) .................................... 711 17.1.13 HDBARU--Intel(R) High Definition Audio Upper Base Address Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 711 17.1.14 SVID--Subsystem Vendor Identification Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 712 17.1.15 SID--Subsystem Identification Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 712 17.1.16 CAPPTR--Capabilities Pointer Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 712 17.1.17 INTLN--Interrupt Line Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 713 Datasheet 19 17.1.18 17.1.19 17.1.20 17.1.21 17.1.22 17.1.23 17.1.24 17.1.25 17.1.26 17.1.27 17.1.28 17.1.29 17.1.30 17.1.31 17.1.32 17.1.33 17.1.34 17.1.35 17.1.36 17.1.37 17.1.38 17.1.39 17.1.40 17.1.41 17.1.42 17.1.43 17.1.44 17.1.45 17.1.46 17.1.47 17.1.48 17.1.49 20 INTPN--Interrupt Pin Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 713 HDCTL--Intel(R) High Definition Audio Control Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 713 HDINIT1--Intel(R) High Definition Audio Initialization Register 1 (Intel(R) High Definition Audio Controller--D27:F0) .................................................................. 713 TCSEL--Traffic Class Select Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 714 DCKCTL--Docking Control Register (Mobile Only) (Intel(R) High Definition Audio Controller--D27:F0) .................................. 714 DCKSTS--Docking Status Register (Mobile Only) (Intel(R) High Definition Audio Controller--D27:F0) .................................. 715 PID--PCI Power Management Capability ID Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 715 PC--Power Management Capabilities Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 716 PCS--Power Management Control and Status Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 716 MID--MSI Capability ID Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 717 MMC--MSI Message Control Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 717 MMLA--MSI Message Lower Address Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 718 MMUA--MSI Message Upper Address Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 718 MMD--MSI Message Data Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 718 PXID--PCI Express* Capability ID Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 718 PXC--PCI Express* Capabilities Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 719 DEVCAP--Device Capabilities Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 719 DEVC--Device Control Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 720 DEVS--Device Status Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 721 VCCAP--Virtual Channel Enhanced Capability Header (Intel(R) High Definition Audio Controller--D27:F0) .................................. 721 PVCCAP1--Port VC Capability Register 1 (Intel(R) High Definition Audio Controller--D27:F0) .................................. 722 PVCCAP2--Port VC Capability Register 2 (Intel(R) High Definition Audio Controller--D27:F0) .................................. 722 PVCCTL--Port VC Control Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 722 PVCSTS--Port VC Status Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 723 VC0CAP--VC0 Resource Capability Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 723 VC0CTL--VC0 Resource Control Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 724 VC0STS--VC0 Resource Status Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 724 VCiCAP--VCi Resource Capability Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 725 VCiCTL--VCi Resource Control Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 725 VCiSTS--VCi Resource Status Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 726 RCCAP--Root Complex Link Declaration Enhanced Capability Header Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 726 ESD--Element Self Description Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 726 Datasheet 17.1.50 17.2 Datasheet L1DESC--Link 1 Description Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 727 17.1.51 L1ADDL--Link 1 Lower Address Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 727 17.1.52 L1ADDU--Link 1 Upper Address Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 727 Intel(R) High Definition Audio Memory Mapped Configuration Registers (Intel(R) High Definition Audio--D27:F0) .............................................................. 728 17.2.1 GCAP--Global Capabilities Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 732 17.2.2 VMIN--Minor Version Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 732 17.2.3 VMAJ--Major Version Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 732 17.2.4 OUTPAY--Output Payload Capability Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 733 17.2.5 INPAY--Input Payload Capability Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 733 17.2.6 GCTL--Global Control Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 734 17.2.7 WAKEEN--Wake Enable Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 735 17.2.8 STATESTS--State Change Status Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 735 17.2.9 GSTS--Global Status Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 736 17.2.10 OUTSTRMPAY--Output Stream Payload Capability Register (Intel(R) High Definition Audio Controller--D27:F0) ..................... 736 17.2.11 INSTRMPAY--Input Stream Payload Capability Register (Intel(R) High Definition Audio Controller--D27:F0) ..................... 737 17.2.12 INTCTL--Interrupt Control Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 737 17.2.13 INTSTS--Interrupt Status Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 738 17.2.14 WALCLK--Wall Clock Counter Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 739 17.2.15 SSYNC--Stream Synchronization Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 739 17.2.16 CORBLBASE--CORB Lower Base Address Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 740 17.2.17 CORBUBASE--CORB Upper Base Address Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 740 17.2.18 CORBWP--CORB Write Pointer Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 740 17.2.19 CORBRP--CORB Read Pointer Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 741 17.2.20 CORBCTL--CORB Control Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 741 17.2.21 CORBST--CORB Status Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 742 17.2.22 CORBSIZE--CORB Size Register Intel(R) High Definition Audio Controller--D27:F0) ................................... 742 17.2.23 RIRBLBASE--RIRB Lower Base Address Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 742 17.2.24 RIRBUBASE--RIRB Upper Base Address Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 743 17.2.25 RIRBWP--RIRB Write Pointer Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 743 17.2.26 RINTCNT--Response Interrupt Count Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 744 17.2.27 RIRBCTL--RIRB Control Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 744 17.2.28 RIRBSTS--RIRB Status Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 745 17.2.29 RIRBSIZE--RIRB Size Register (Intel(R) High Definition Audio Controller--D27:F0).................................. 745 21 17.2.30 17.2.31 17.2.32 17.2.33 17.2.34 17.2.35 17.2.36 17.2.37 17.2.38 17.2.39 17.2.40 17.2.41 17.2.42 17.2.43 17.2.44 18 22 IC--Immediate Command Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 745 IR--Immediate Response Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 746 ICS--Immediate Command Status Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 746 DPLBASE--DMA Position Lower Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 747 DPUBASE--DMA Position Upper Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 747 SDCTL--Stream Descriptor Control Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 748 SDSTS--Stream Descriptor Status Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 750 SDLPIB--Stream Descriptor Link Position in Buffer Register (Intel(R) High Definition Audio Controller--D27:F0)...................... 751 SDCBL--Stream Descriptor Cyclic Buffer Length Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 751 SDLVI--Stream Descriptor Last Valid Index Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 752 SDFIFOW--Stream Descriptor FIFO Watermark Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 752 SDFIFOS--Stream Descriptor FIFO Size Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 753 SDFMT--Stream Descriptor Format Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 754 SDBDPL--Stream Descriptor Buffer Descriptor List Pointer Lower Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 755 SDBDPU--Stream Descriptor Buffer Descriptor List Pointer Upper Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) .................................. 755 SMBus Controller Registers (D31:F3) ..................................................................... 757 18.1 PCI Configuration Registers (SMBus--D31:F3) ..................................................... 757 18.1.1 VID--Vendor Identification Register (SMBus--D31:F3) ............................ 757 18.1.2 DID--Device Identification Register (SMBus--D31:F3) ............................ 758 18.1.3 PCICMD--PCI Command Register (SMBus--D31:F3) ............................... 758 18.1.4 PCISTS--PCI Status Register (SMBus--D31:F3) ..................................... 759 18.1.5 RID--Revision Identification Register (SMBus--D31:F3) .......................... 759 18.1.6 PI--Programming Interface Register (SMBus--D31:F3) ........................... 760 18.1.7 SCC--Sub Class Code Register (SMBus--D31:F3) ................................... 760 18.1.8 BCC--Base Class Code Register (SMBus--D31:F3).................................. 760 18.1.9 SMBMBAR0--D31_F3_SMBus Memory Base Address 0 Register (SMBus--D31:F3)................................................................. 760 18.1.10 SMBMBAR1--D31_F3_SMBus Memory Base Address 1 Register (SMBus--D31:F3)................................................................. 761 18.1.11 SMB_BASE--SMBus Base Address Register (SMBus--D31:F3) .............................................................................. 761 18.1.12 SVID--Subsystem Vendor Identification Register (SMBus--D31:F2/F4) ......................................................................... 761 18.1.13 SID--Subsystem Identification Register (SMBus--D31:F2/F4) ......................................................................... 762 18.1.14 INT_LN--Interrupt Line Register (SMBus--D31:F3)................................. 762 18.1.15 INT_PN--Interrupt Pin Register (SMBus--D31:F3) .................................. 762 18.1.16 HOSTC--Host Configuration Register (SMBus--D31:F3)........................... 763 18.2 SMBus I/O and Memory Mapped I/O Registers ..................................................... 764 18.2.1 HST_STS--Host Status Register (SMBus--D31:F3) ................................. 765 18.2.2 HST_CNT--Host Control Register (SMBus--D31:F3)................................ 766 18.2.3 HST_CMD--Host Command Register (SMBus--D31:F3) ........................... 768 18.2.4 XMIT_SLVA--Transmit Slave Address Register (SMBus--D31:F3) .............................................................................. 768 18.2.5 HST_D0--Host Data 0 Register (SMBus--D31:F3) .................................. 768 18.2.6 HST_D1--Host Data 1 Register (SMBus--D31:F3) .................................. 768 18.2.7 Host_BLOCK_DB--Host Block Data Byte Register (SMBus--D31:F3) .............................................................................. 769 Datasheet 18.2.8 18.2.9 18.2.10 18.2.11 18.2.12 18.2.13 18.2.14 18.2.15 18.2.16 18.2.17 18.2.18 18.2.19 19 PEC--Packet Error Check (PEC) Register (SMBus--D31:F3).............................................................................. 769 RCV_SLVA--Receive Slave Address Register (SMBus--D31:F3).............................................................................. 770 SLV_DATA--Receive Slave Data Register (SMBus--D31:F3) .................... 770 AUX_STS--Auxiliary Status Register (SMBus--D31:F3) ........................... 770 AUX_CTL--Auxiliary Control Register (SMBus--D31:F3) .......................... 771 SMLINK_PIN_CTL--SMLink Pin Control Register (SMBus--D31:F3).............................................................................. 771 SMBus_PIN_CTL--SMBus Pin Control Register (SMBus--D31:F3).............................................................................. 772 SLV_STS--Slave Status Register (SMBus--D31:F3)................................ 772 SLV_CMD--Slave Command Register (SMBus--D31:F3).......................... 773 NOTIFY_DADDR--Notify Device Address Register (SMBus--D31:F3).............................................................................. 773 NOTIFY_DLOW--Notify Data Low Byte Register (SMBus--D31:F3).............................................................................. 774 NOTIFY_DHIGH--Notify Data High Byte Register (SMBus--D31:F3).............................................................................. 774 PCI Express* Configuration Registers.................................................................... 775 19.1 PCI Express* Configuration Registers (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)................................................... 775 19.1.1 VID--Vendor Identification Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 777 19.1.2 DID--Device Identification Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 777 19.1.3 PCICMD--PCI Command Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 778 19.1.4 PCISTS--PCI Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 779 19.1.5 RID--Revision Identification Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 780 19.1.6 PI--Programming Interface Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 780 19.1.7 SCC--Sub Class Code Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 780 19.1.8 BCC--Base Class Code Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 780 19.1.9 CLS--Cache Line Size Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 781 19.1.10 PLT--Primary Latency Timer Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 781 19.1.11 HEADTYP--Header Type Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 781 19.1.12 BNUM--Bus Number Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 782 19.1.13 SLT--Secondary Latency Timer (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 782 19.1.14 IOBL--I/O Base and Limit Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 782 19.1.15 SSTS--Secondary Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 783 19.1.16 MBL--Memory Base and Limit Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 784 19.1.17 PMBL--Prefetchable Memory Base and Limit Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 784 19.1.18 PMBU32--Prefetchable Memory Base Upper 32 Bits Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/ F6/F7/F6/F7) .................................................................................... 785 19.1.19 PMLU32--Prefetchable Memory Limit Upper 32 Bits Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/ F6/F7/F6/F7) .................................................................................... 785 19.1.20 CAPP--Capabilities List Pointer Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 785 19.1.21 INTR--Interrupt Information Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ........................... 786 Datasheet 23 19.1.22 19.1.23 19.1.24 19.1.25 19.1.26 19.1.27 19.1.28 19.1.29 19.1.30 19.1.31 19.1.32 19.1.33 19.1.34 19.1.35 19.1.36 19.1.37 19.1.38 19.1.39 19.1.40 19.1.41 19.1.42 19.1.43 19.1.44 19.1.45 19.1.46 19.1.47 19.1.48 19.1.49 19.1.50 19.1.51 19.1.52 19.1.53 19.1.54 24 BCTRL--Bridge Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) ............................ 787 CLIST--Capabilities List Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 788 XCAP--PCI Express* Capabilities Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 788 DCAP--Device Capabilities Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 789 DCTL--Device Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 790 DSTS--Device Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 791 LCAP--Link Capabilities Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 791 LCTL--Link Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 793 LSTS--Link Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 794 SLCAP--Slot Capabilities Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 795 SLCTL--Slot Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 796 SLSTS--Slot Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 797 RCTL--Root Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 798 RSTS--Root Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 798 DCAP2--Device Capabilities 2 Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 799 DCTL2--Device Control 2 Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 799 LCTL2--Link Control 2 Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 800 MID--Message Signaled Interrupt Identifiers Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 800 MC--Message Signaled Interrupt Message Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 800 MA--Message Signaled Interrupt Message Address Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)......................... 801 MD--Message Signaled Interrupt Message Data Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 801 SVCAP--Subsystem Vendor Capability Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 801 SVID--Subsystem Vendor Identification Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 801 PMCAP--Power Management Capability Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 802 PMC--PCI Power Management Capabilities Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 802 PMCS--PCI Power Management Control and Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)......................... 803 MPC2--Miscellaneous Port Configuration Register 2 (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 804 MPC--Miscellaneous Port Configuration Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 805 SMSCS--SMI/SCI Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 807 RPDCGEN--Root Port Dynamic Clock Gating Enable (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 808 PECR1--PCI Express* Configuration Register 1 (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 808 UES--Uncorrectable Error Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 809 UEM--Uncorrectable Error Mask (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) ..................................... 810 Datasheet 19.1.55 19.1.56 19.1.57 19.1.58 19.1.59 19.1.60 19.1.61 19.1.62 UEV--Uncorrectable Error Severity (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)..................................... 811 CES--Correctable Error Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)..................................... 812 CEM--Correctable Error Mask Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)..................................... 812 AECC--Advanced Error Capabilities and Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)..................................... 813 RES--Root Error Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)..................................... 813 PECR2--PCI Express* Configuration Register 2 (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)..................................... 814 PEETM--PCI Express* Extended Test Mode Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)..................................... 814 PEC1--PCI Express* Configuration Register 1 (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)..................................... 814 20 High Precision Event Timer Registers .................................................................... 815 20.1 Memory Mapped Registers................................................................................ 815 20.1.1 GCAP_ID--General Capabilities and Identification Register ...................... 817 20.1.2 GEN_CONF--General Configuration Register.......................................... 817 20.1.3 GINTR_STA--General Interrupt Status Register ..................................... 818 20.1.4 MAIN_CNT--Main Counter Value Register ............................................. 818 20.1.5 TIMn_CONF--Timer n Configuration and Capabilities Register .................. 819 20.1.6 TIMn_COMP--Timer n Comparator Value Register .................................. 821 21 Serial Peripheral Interface (SPI) ........................................................................... 823 21.1 Serial Peripheral Interface Memory Mapped Configuration Registers ....................... 823 21.1.1 BFPR -BIOS Flash Primary Region Register (SPI Memory Mapped Configuration Registers) ...................................... 824 21.1.2 HSFS--Hardware Sequencing Flash Status Register (SPI Memory Mapped Configuration Registers) ...................................... 825 21.1.3 HSFC--Hardware Sequencing Flash Control Register (SPI Memory Mapped Configuration Registers) ...................................... 827 21.1.4 FADDR--Flash Address Register (SPI Memory Mapped Configuration Registers) ...................................... 827 21.1.5 FDATA0--Flash Data 0 Register (SPI Memory Mapped Configuration Registers) ...................................... 828 21.1.6 FDATAN--Flash Data [N] Register (SPI Memory Mapped Configuration Registers) ...................................... 828 21.1.7 FRAP--Flash Regions Access Permissions Register (SPI Memory Mapped Configuration Registers) ...................................... 829 21.1.8 FREG0--Flash Region 0 (Flash Descriptor) Register (SPI Memory Mapped Configuration Registers) ...................................... 830 21.1.9 FREG1--Flash Region 1 (BIOS Descriptor) Register (SPI Memory Mapped Configuration Registers) ...................................... 830 21.1.10 FREG2--Flash Region 2 (Intel(R) ME) Register (SPI Memory Mapped Configuration Registers) ...................................... 831 21.1.11 FREG3--Flash Region 3 (GbE) Register (SPI Memory Mapped Configuration Registers) ...................................... 831 21.1.12 FREG4--Flash Region 4 (Platform Data) Register (SPI Memory Mapped Configuration Registers) ...................................... 832 21.1.13 PR0--Protected Range 0 Register (SPI Memory Mapped Configuration Registers) ...................................... 832 21.1.14 PR1--Protected Range 1 Register (SPI Memory Mapped Configuration Registers) ...................................... 833 21.1.15 PR2--Protected Range 2 Register (SPI Memory Mapped Configuration Registers) ...................................... 834 21.1.16 PR3--Protected Range 3 Register (SPI Memory Mapped Configuration Registers) ...................................... 835 21.1.17 PR4--Protected Range 4 Register (SPI Memory Mapped Configuration Registers) ...................................... 836 21.1.18 SSFS--Software Sequencing Flash Status Register (SPI Memory Mapped Configuration Registers) ...................................... 837 21.1.19 SSFC--Software Sequencing Flash Control Register (SPI Memory Mapped Configuration Registers) ...................................... 838 Datasheet 25 21.1.20 21.2 21.3 21.4 22 26 PREOP--Prefix Opcode Configuration Register (SPI Memory Mapped Configuration Registers) ...................................... 839 21.1.21 OPTYPE--Opcode Type Configuration Register (SPI Memory Mapped Configuration Registers) ...................................... 839 21.1.22 OPMENU--Opcode Menu Configuration Register (SPI Memory Mapped Configuration Registers) ...................................... 840 21.1.23 BBAR--BIOS Base Address Configuration Register (SPI Memory Mapped Configuration Registers) ...................................... 841 21.1.24 FDOC--Flash Descriptor Observability Control Register (SPI Memory Mapped Configuration Registers) ...................................... 841 21.1.25 FDOD--Flash Descriptor Observability Data Register (SPI Memory Mapped Configuration Registers) ...................................... 842 21.1.26 AFC--Additional Flash Control Register (SPI Memory Mapped Configuration Registers) ...................................... 842 21.1.27 LVSCC--Host Lower Vendor Specific Component Capabilities Register (SPI Memory Mapped Configuration Registers) ...................................... 842 21.1.28 UVSCC--Host Upper Vendor Specific Component Capabilities Register (SPI Memory Mapped Configuration Registers) ...................................... 844 21.1.29 FPB--Flash Partition Boundary Register (SPI Memory Mapped Configuration Registers) ...................................... 845 Flash Descriptor Records................................................................................... 845 OEM Section ................................................................................................... 846 GbE SPI Flash Program Registers ....................................................................... 846 21.4.1 GLFPR -Gigabit LAN Flash Primary Region Register (GbE LAN Memory Mapped Configuration Registers) ............................... 847 21.4.2 HSFS--Hardware Sequencing Flash Status Register (GbE LAN Memory Mapped Configuration Registers) ............................... 847 21.4.3 HSFC--Hardware Sequencing Flash Control Register (GbE LAN Memory Mapped Configuration Registers) ............................... 849 21.4.4 FADDR--Flash Address Register (GbE LAN Memory Mapped Configuration Registers) ............................... 850 21.4.5 FDATA0--Flash Data 0 Register (GbE LAN Memory Mapped Configuration Registers) ............................... 850 21.4.6 FRAP--Flash Regions Access Permissions Register (GbE LAN Memory Mapped Configuration Registers) ............................... 851 21.4.7 FREG0--Flash Region 0 (Flash Descriptor) Register (GbE LAN Memory Mapped Configuration Registers) ............................... 852 21.4.8 FREG1--Flash Region 1 (BIOS Descriptor) Register (GbE LAN Memory Mapped Configuration Registers) ............................... 852 21.4.9 FREG2--Flash Region 2 (Intel(R) ME) Register (GbE LAN Memory Mapped Configuration Registers) ............................... 852 21.4.10 FREG3--Flash Region 3 (GbE) Register (GbE LAN Memory Mapped Configuration Registers) ............................... 853 21.4.11 PR0--Protected Range 0 Register (GbE LAN Memory Mapped Configuration Registers) ............................... 853 21.4.12 PR1--Protected Range 1 Register (GbE LAN Memory Mapped Configuration Registers) ............................... 854 21.4.13 SSFS--Software Sequencing Flash Status Register (GbE LAN Memory Mapped Configuration Registers) ............................... 855 21.4.14 SSFC--Software Sequencing Flash Control Register (GbE LAN Memory Mapped Configuration Registers) ............................... 856 21.4.15 PREOP--Prefix Opcode Configuration Register (GbE LAN Memory Mapped Configuration Registers) ............................... 857 21.4.16 OPTYPE--Opcode Type Configuration Register (GbE LAN Memory Mapped Configuration Registers) ............................... 857 21.4.17 OPMENU--Opcode Menu Configuration Register (GbE LAN Memory Mapped Configuration Registers) ............................... 858 Thermal Sensor Registers (D31:F6) ....................................................................... 859 22.1 PCI Bus Configuration Registers......................................................................... 859 22.1.1 VID--Vendor Identification Register...................................................... 860 22.1.2 DID--Device Identification Register ...................................................... 860 22.1.3 CMD--Command Register ................................................................... 860 22.1.4 STS--Status Register ......................................................................... 861 22.1.5 RID--Revision Identification Register .................................................... 861 Datasheet 22.1.6 22.1.7 22.1.8 22.1.9 22.1.10 22.1.11 22.1.12 22.1.13 22.1.14 22.1.15 22.1.16 22.1.17 22.1.18 22.1.19 22.1.20 22.2 23 PI--Programming Interface Register .................................................... 861 SCC--Sub Class Code Register ............................................................ 862 BCC--Base Class Code Register ........................................................... 862 CLS--Cache Line Size Register ............................................................ 862 LT--Latency Timer Register ................................................................ 862 HTYPE--Header Type Register ............................................................. 862 TBAR--Thermal Base Register ............................................................. 863 TBARH--Thermal Base High DWord Register ......................................... 863 SVID--Subsystem Vendor ID Register .................................................. 864 SID--Subsystem ID Register............................................................... 864 CAP_PTR--Capabilities Pointer Register ................................................ 864 Offset 3Ch - INTLN--Interrupt Line Register ......................................... 865 INTPN--Interrupt Pin Register ............................................................. 865 TBARB--BIOS Assigned Thermal Base Address Register .......................... 865 TBARBH--BIOS Assigned Thermal Base High DWord Register ........................................................................................... 866 22.1.21 PID--PCI Power Management Capability ID Register............................... 866 22.1.22 PC--Power Management Capabilities Register........................................ 866 22.1.23 PCS--Power Management Control And Status Register ........................... 867 Thermal Memory Mapped Configuration Registers (Thermal Sensor - D31:F26) ............................................................................ 868 22.2.1 TSIU--Thermal Sensor In Use Register................................................. 869 22.2.2 TSE--Thermal Sensor Enable Register .................................................. 869 22.2.3 TSS--Thermal Sensor Status Register .................................................. 870 22.2.4 TSTR--Thermal Sensor Thermometer Read Register............................... 870 22.2.5 TSTTP--Thermal Sensor Temperature Trip Point Register ........................ 871 22.2.6 TSCO--Thermal Sensor Catastrophic Lock-Down Register ....................... 871 22.2.7 TSES--Thermal Sensor Error Status Register ........................................ 872 22.2.8 TSGPEN--Thermal Sensor General Purpose Event Enable Register................................................................................. 873 22.2.9 TSPC--Thermal Sensor Policy Control Register ...................................... 874 22.2.10 PPEC--Processor Power Error Correction Register (Mobile Only).................................................................................... 874 22.2.11 CTA--Processor Core Temperature Adjust Register................................. 875 22.2.12 PTA--PCH Temperature Adjust Register ................................................ 875 22.2.13 MGTA--Memory Controller/Graphics Temperature Adjust Register ................................................................................. 875 22.2.14 TRC--Thermal Reporting Control Register ............................................. 876 22.2.15 TES--Turbo Interrupt Status Register (Mobile Only) ............................... 877 22.2.16 TEN--Turbo Interrupt Enable Register (Mobile Only)............................... 877 22.2.17 PSC--Power Sharing Configuration Register (Mobile Only)....................... 877 22.2.18 CTV1--Core Temperature Value 1 Register ........................................... 878 22.2.19 CTV2--Core Temperature Value 2 Register ........................................... 878 22.2.20 CEV1--Core Energy Value Register ...................................................... 878 22.2.21 AE--Alert Enable Register ................................................................... 879 22.2.22 HTS--Host Status Register (Mobile Only) .............................................. 879 22.2.23 PTL--Processor Temperature Limit Register (Mobile Only) ....................... 880 22.2.24 MGTV--Memory Controller/Graphics Temperature Value Register .................................................................................. 880 22.2.25 PTV--Processor Temperature Value Register ......................................... 880 22.2.26 MMGPC--Max Memory Controller/Graphics Power Clamp Register (Mobile Only) ....................................................................... 880 22.2.27 MPPC--Max Processor Power Clamp Register (Mobile Only) ..................... 881 22.2.28 MPCPC--Max Processor Core Power Clamp Register (Mobile Only).................................................................................... 881 22.2.29 TSPIEN--Thermal Sensor PCI Interrupt Enable Register .......................... 882 22.2.30 TSLOCK--Thermal Sensor Register Lock Control Register ........................ 883 22.2.31 STS--Turbo Status (Mobile Only)......................................................... 883 22.2.32 SEC--Event Clear Register (Mobile Only) .............................................. 883 22.2.33 TC3--Thermal Compares 3 Register ..................................................... 883 22.2.34 TC1--Thermal Compares 1 Register ..................................................... 884 22.2.35 TC2--Thermal Compares 2 Register ..................................................... 885 22.2.36 DTV--DIMM Temperature Values Register............................................. 885 22.2.37 ITV--Internal Temperature Values Register........................................... 886 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0).......... 887 Datasheet 27 23.1 23.2 28 First Intel(R) Management Engine Interface (Intel(R) MEI) Configuration Registers (MEI--D22:F0) ................................................................................................ 887 23.1.1 VID--Vendor Identification Register (MEI--D22:F0) .................................................................................. 888 23.1.2 DID--Device Identification Register (MEI--D22:F0) .................................................................................. 888 23.1.3 PCICMD--PCI Command Register (MEI--D22:F0) .................................................................................. 889 23.1.4 PCISTS--PCI Status Register (MEI--D22:F0) .................................................................................. 889 23.1.5 RID--Revision Identification Register (MEI--D22:F0) .................................................................................. 890 23.1.6 CC--Class Code Register (MEI--D22:F0) .................................................................................. 890 23.1.7 HTYPE--Header Type Register (MEI--D22:F0) .................................................................................. 890 23.1.8 MEI0_MBAR--MEI0 MMIO Base Address Register (MEI--D22:F0) .................................................................................. 891 23.1.9 SVID--Subsystem Vendor ID Register (MEI--D22:F0) .................................................................................. 891 23.1.10 SID--Subsystem ID Register (MEI--D22:F0) .................................................................................. 891 23.1.11 CAPP--Capabilities List Pointer Register (MEI--D22:F0) .................................................................................. 892 23.1.12 INTR--Interrupt Information Register (MEI--D22:F0) .................................................................................. 892 23.1.13 HFS--Host Firmware Status Register (MEI--D22:F0) .................................................................................. 892 23.1.14 ME_UMA--Management Engine UMA Register (MEI--D22:F0) .................................................................................. 893 23.1.15 GMES--General ME Status Register (MEI--D22:F0) .................................................................................. 893 23.1.16 H_GS--Host General Status Register (MEI--D22:F0) .................................................................................. 893 23.1.17 PID--PCI Power Management Capability ID Register (MEI--D22:F0) .................................................................................. 894 23.1.18 PC--PCI Power Management Capabilities Register (MEI--D22:F0) .................................................................................. 894 23.1.19 PMCS--PCI Power Management Control and Status Register (MEI--D22:F0)...................................................................... 895 23.1.20 MID--Message Signaled Interrupt Identifiers Register (MEI--D22:F0) .................................................................................. 895 23.1.21 MC--Message Signaled Interrupt Message Control Register (MEI--D22:F0) .................................................................................. 896 23.1.22 MA--Message Signaled Interrupt Message Address Register (MEI--D22:F0)...................................................................... 896 23.1.23 MUA--Message Signaled Interrupt Upper Address Register (MEI--D22:F0) .................................................................................. 896 23.1.24 MD--Message Signaled Interrupt Message Data Register (MEI--D22:F0) .................................................................................. 896 23.1.25 HIDM--MEI Interrupt Delivery Mode Register (MEI--D22:F0) .................................................................................. 897 23.1.26 HERES--MEI Extend Register Status (MEI--D22:F0) .................................................................................. 897 23.1.27 HERX--MEI Extend Register DWX (MEI--D22:F0) .................................................................................. 898 Second Management Engine Interface(MEI1) Configuration Registers (MEI--D22:F1) ................................................................................................ 899 23.2.1 VID--Vendor Identification Register (MEI--D22:F1) .................................................................................. 900 23.2.2 DID--Device Identification Register (MEI--D22:F1) .................................................................................. 900 23.2.3 PCICMD--PCI Command Register (MEI--D22:F1) .................................................................................. 900 23.2.4 PCISTS--PCI Status Register (MEI--D22:F1) .................................................................................. 901 Datasheet 23.2.5 23.3 23.4 23.5 Datasheet RID--Revision Identification Register (MEI--D22:F1).................................................................................. 901 23.2.6 CC--Class Code Register (MEI--D22:F1).................................................................................. 901 23.2.7 HTYPE--Header Type Register (MEI--D22:F1).................................................................................. 902 23.2.8 MEI_MBAR--MEI MMIO Base Address Register (MEI--D22:F1).................................................................................. 902 23.2.9 SVID--Subsystem Vendor ID Register (MEI--D22:F1).................................................................................. 902 23.2.10 SID--Subsystem ID Register (MEI--D22:F1).................................................................................. 903 23.2.11 CAPP--Capabilities List Pointer Register (MEI--D22:F1).................................................................................. 903 23.2.12 INTR--Interrupt Information Register (MEI--D22:F1).................................................................................. 903 23.2.13 HFS--Host Firmware Status Register (MEI--D22:F1).................................................................................. 903 23.2.14 GMES--General ME Status Register (MEI--D22:F1).................................................................................. 904 23.2.15 H_GS--Host General Status Register (MEI--D22:F1).................................................................................. 904 23.2.16 PID--PCI Power Management Capability ID Register (MEI--D22:F1).................................................................................. 904 23.2.17 PC--PCI Power Management Capabilities Register (MEI--D22:F1).................................................................................. 905 23.2.18 PMCS--PCI Power Management Control and Status Register (MEI--D22:F1) ..................................................................... 906 23.2.19 MID--Message Signaled Interrupt Identifiers Register (MEI--D22:F1).................................................................................. 906 23.2.20 MC--Message Signaled Interrupt Message Control Register (MEI--D22:F1).................................................................................. 907 23.2.21 MA--Message Signaled Interrupt Message Address Register (MEI--D22:F1) ..................................................................... 907 23.2.22 MUA--Message Signaled Interrupt Upper Address Register (MEI--D22:F1).................................................................................. 907 23.2.23 MD--Message Signaled Interrupt Message Data Register (MEI--D22:F1).................................................................................. 907 23.2.24 HIDM--MEI Interrupt Delivery Mode Register (MEI--D22:F1).................................................................................. 908 23.2.25 HERES--MEI Extend Register Status (MEI--D22:F1).................................................................................. 908 23.2.26 HERX--MEI Extend Register DWX (MEI--D22:F1).................................................................................. 909 MEI0_MBAR--MEI0 MMIO Registers ................................................................... 909 23.3.1 H_CB_WW--Host Circular Buffer Write Window Register (MEI MMIO Register) ......................................................................... 910 23.3.2 H_CSR--Host Control Status Register (MEI MMIO Register) ......................................................................... 910 23.3.3 ME_CB_RW--ME Circular Buffer Read Window Register (MEI MMIO Register) ......................................................................... 911 23.3.4 ME CSR_HA--ME Control Status Host Access Register (MEI MMIO Register) ......................................................................... 911 MEI1_MBAR--MEI0 MMIO Registers ................................................................... 912 23.4.1 H_CB_WW--Host Circular Buffer Write Window Register (MEI MMIO Register) ......................................................................... 912 23.4.2 H_CSR--Host Control Status Register (MEI MMIO Register) ......................................................................... 913 23.4.3 ME_CB_RW--ME Circular Buffer Read Window Register (MEI MMIO Register) ......................................................................... 914 23.4.4 ME CSR_HA--ME Control Status Host Access Register (MEI MMIO Register) ......................................................................... 914 IDE Function for Remote Boot and Installations PT IDER Registers (IDER--D22:F2) .................................................................... 915 23.5.1 VID--Vendor Identification Register (IDER--D22:F2) .............................. 916 23.5.2 DID--Device Identification Register (IDER--D22:F2) .............................. 916 23.5.3 PCICMD--PCI Command Register (IDER--D22:F2) ................................. 916 29 23.5.4 23.5.5 23.5.6 23.5.7 23.5.8 23.6 30 PCISTS--PCI Device Status Register (IDER--D22:F2) ............................. 917 RID--Revision Identification Register (IDER--D22:F2)............................. 917 CC--Class Codes Register (IDER--D22:F2) ............................................ 917 CLS--Cache Line Size Register (IDER--D22:F2) ..................................... 918 PCMDBA--Primary Command Block IO Bar Register (IDER--D22:F2) ................................................................................ 918 23.5.9 PCTLBA--Primary Control Block Base Address Register (IDER--D22:F2) ................................................................................ 918 23.5.10 SCMDBA--Secondary Command Block Base Address Register (IDER--D22:F2) .................................................................... 919 23.5.11 SCTLBA--Secondary Control Block base Address Register (IDER--D22:F2) .................................................................... 919 23.5.12 LBAR--Legacy Bus Master Base Address Register (IDER--D22:F2) ................................................................................ 919 23.5.13 SVID--Subsystem Vendor ID Register (IDER--D22:F2) ........................... 920 23.5.14 SID--Subsystem ID Register (IDER--D22:F2)........................................ 920 23.5.15 CAPP--Capabilities List Pointer Register (IDER--D22:F2) ................................................................................ 920 23.5.16 INTR--Interrupt Information Register (IDER--D22:F2) ................................................................................ 920 23.5.17 PID--PCI Power Management Capability ID Register (IDER--D22:F2) ................................................................................ 921 23.5.18 PC--PCI Power Management Capabilities Register (IDER--D22:F2) ................................................................................ 921 23.5.19 PMCS--PCI Power Management Control and Status Register (IDER--D22:F2) .................................................................... 922 23.5.20 MID--Message Signaled Interrupt Capability ID Register (IDER--D22:F2) .................................................................... 922 23.5.21 MC--Message Signaled Interrupt Message Control Register (IDER--D22:F2) .................................................................... 923 23.5.22 MA--Message Signaled Interrupt Message Address Register (IDER--D22:F2) .................................................................... 923 23.5.23 MAU--Message Signaled Interrupt Message Upper Address Register (IDER--D22:F2) ........................................................ 923 23.5.24 MD--Message Signaled Interrupt Message Data Register (IDER--D22:F2) .................................................................... 924 IDE BAR0 ....................................................................................................... 924 23.6.1 IDEDATA--IDE Data Register (IDER--D22:F2) ....................................... 925 23.6.2 IDEERD1--IDE Error Register DEV1 (IDER--D22:F2) ................................................................................ 925 23.6.3 IDEERD0--IDE Error Register DEV0 (IDER--D22:F2) ................................................................................ 925 23.6.4 IDEFR--IDE Features Register (IDER--D22:F2) ................................................................................ 926 23.6.5 IDESCIR--IDE Sector Count In Register (IDER--D22:F2) ................................................................................ 926 23.6.6 IDESCOR1--IDE Sector Count Out Register Device 1 Register (IDER--D22:F2) .................................................................... 926 23.6.7 IDESCOR0--IDE Sector Count Out Register Device 0 Register (IDER--D22:F2) ................................................................. 927 23.6.8 IDESNOR0--IDE Sector Number Out Register Device 0 Register (IDER--D22:F2) ....................................................... 927 23.6.9 IDESNOR1--IDE Sector Number Out Register Device 1 Register (IDER--D22:F2) ....................................................... 927 23.6.10 IDESNIR--IDE Sector Number In Register Register (IDER--D22:F2) ................................................................................ 928 23.6.11 IDECLIR--IDE Cylinder Low In Register Register (IDER--D22:F2) ................................................................................ 928 23.6.12 IDCLOR1--IDE Cylinder Low Out Register Device 1 Register (IDER--D22:F2) .................................................................... 928 23.6.13 IDCLOR0--IDE Cylinder Low Out Register Device 0 Register (IDER--D22:F2) .................................................................... 929 23.6.14 IDCHOR0--IDE Cylinder High Out Register Device 0 Register (IDER--D22:F2) .................................................................... 929 23.6.15 IDCHOR1--IDE Cylinder High Out Register Device 1 Register (IDER--D22:F2) .................................................................... 929 Datasheet 23.6.16 23.7 23.8 23.9 Datasheet IDECHIR--IDE Cylinder High In Register (IDER--D22:F2) ................................................................................ 930 23.6.17 IDEDHIR--IDE Drive/Head In Register (IDER--D22:F2) ................................................................................ 930 23.6.18 IDDHOR1--IDE Drive Head Out Register Device 1 Register (IDER--D22:F2).................................................................... 931 23.6.19 IDDHOR0--IDE Drive Head Out Register Device 0 Register (IDER--D22:F2).................................................................... 931 23.6.20 IDESD0R--IDE Status Device 0 Register (IDER--D22:F2) ................................................................................ 932 23.6.21 IDESD1R--IDE Status Device 1 Register (IDER--D22:F2) ................................................................................ 933 23.6.22 IDECR--IDE Command Register (IDER--D22:F2) ................................... 933 IDE BAR1 ....................................................................................................... 934 23.7.1 IDDCR--IDE Device Control Register (IDER--D22:F2)............................. 934 23.7.2 IDASR--IDE Alternate status Register (IDER--D22:F2) ........................... 934 IDE BAR4 ....................................................................................................... 935 23.8.1 IDEPBMCR--IDE Primary Bus Master Command Register (IDER--D22:F2).................................................................... 936 23.8.2 IDEPBMDS0R--IDE Primary Bus Master Device Specific 0 Register (IDER--D22:F2) ..................................................... 936 23.8.3 IDEPBMSR--IDE Primary Bus Master Status Register (IDER--D22:F2).................................................................... 937 23.8.4 IDEPBMDS1R--IDE Primary Bus Master Device Specific 1 Register (IDER--D22:F2) ..................................................... 937 23.8.5 IDEPBMDTPR0--IDE Primary Bus Master Descriptor Table Pointer Byte 0 Register (IDER--D22:F2)....................................... 938 23.8.6 IDEPBMDTPR1--IDE Primary Bus Master Descriptor Table Pointer Byte 1 Register (IDER--D22:F2)....................................... 938 23.8.7 IDEPBMDTPR2--IDE Primary Bus Master Descriptor Table Pointer Byte 2 Register (IDER--D22:F2)....................................... 938 23.8.8 IDEPBMDTPR3--IDE Primary Bus Master Descriptor Table Pointer Byte 3 Register (IDER--D22:F2)....................................... 938 23.8.9 IDESBMCR--IDE Secondary Bus Master Command Register (IDER--D22:F2).................................................................... 939 23.8.10 IDESBMDS0R--IDE Secondary Bus Master Device Specific 0 Register (IDER--D22:F2) ..................................................... 939 23.8.11 IDESBMSR--IDE Secondary Bus Master Status Register (IDER--D22:F2).................................................................... 940 23.8.12 IDESBMDS1R--IDE Secondary Bus Master Device Specific 1 Register (IDER--D22:F2) ..................................................... 940 23.8.13 IDESBMDTPR0--IDE Secondary Bus Master Descriptor Table Pointer Byte 0 Register (IDER--D22:F2)....................................... 940 23.8.14 IDESBMDTPR1--IDE Secondary Bus Master Descriptor Table Pointer Byte 1 Register (IDER--D22:F2)....................................... 941 23.8.15 IDESBMDTPR2--IDE Secondary Bus Master Descriptor Table Pointer Byte 2 Register (IDER--D22:F2)....................................... 941 23.8.16 IDESBMDTPR3--IDE Secondary Bus Master Descriptor Table Pointer Byte 3 Register (IDER--D22:F2)....................................... 941 Serial Port for Remote Keyboard and Text (KT) Redirection (KT--D22:F3) ................................................................................. 942 23.9.1 VVID--Vendor Identification Register (KT--D22:F3) ............................... 943 23.9.2 DID--Device Identification Register (KT--D22:F3).................................. 943 23.9.3 CMD--Command Register Register (KT--D22:F3)................................... 943 23.9.4 STS--Device Status Register (KT--D22:F3)........................................... 944 23.9.5 RID--Revision ID Register (KT--D22:F3) .............................................. 944 23.9.6 CC--Class Codes Register (KT--D22:F3) ............................................... 944 23.9.7 CLS--Cache Line Size Register (KT--D22:F3) ........................................ 945 23.9.8 KTIBA--KT IO Block Base Address Register (KT--D22:F3) ................................................................................... 945 23.9.9 KTMBA--KT Memory Block Base Address Register (KT--D22:F3) ................................................................................... 945 23.9.10 SVID--Subsystem Vendor ID Register (KT--D22:F3) .............................. 946 23.9.11 SID--Subsystem ID Register (KT--D22:F3)........................................... 946 23.9.12 CAP--Capabilities Pointer Register (KT--D22:F3) ................................... 946 23.9.13 INTR--Interrupt Information Register (KT--D22:F3)............................... 946 31 23.9.14 PID--PCI Power Management Capability ID Register (KT--D22:F3).................................................................................... 947 23.9.15 PC--PCI Power Management Capabilities ID Register (KT--D22:F3).................................................................................... 947 23.9.16 MID--Message Signaled Interrupt Capability ID Register (KT--D22:F3) ....................................................................... 947 23.9.17 MC--Message Signaled Interrupt Message Control Register (KT--D22:F3) ....................................................................... 948 23.9.18 MA--Message Signaled Interrupt Message Address Register (KT--D22:F3) ....................................................................... 948 23.9.19 MAU--Message Signaled Interrupt Message Upper Address Register (KT--D22:F3) ........................................................... 948 23.9.20 MD--Message Signaled Interrupt Message Data Register (KT--D22:F3) ....................................................................... 949 23.10 KT IO/ Memory Mapped Device Registers ............................................................ 949 23.10.1 KTRxBR--KT Receive Buffer Register (KT--D23:F3) ................................ 950 23.10.2 KTTHR--KT Transmit Holding Register (KT--D23:F3) .............................. 950 23.10.3 KTDLLR--KT Divisor Latch LSB Register (KT--D23:F3) ............................ 951 23.10.4 KTIER--KT Interrupt Enable Register (KT--D23:F3) ................................ 951 23.10.5 KTDLMR--KT Divisor Latch MSB Register (KT--D23:F3)........................... 952 23.10.6 KTIIR--KT Interrupt Identification Register (KT--D23:F3).................................................................................... 952 23.10.7 KTFCR--KT FIFO Control Register (KT--D23:F3)..................................... 953 23.10.8 KTLCR--KT Line Control Register (KT--D23:F3)...................................... 953 23.10.9 KTMCR--KT Modem Control Register (KT--D23:F3) ................................ 954 23.10.10 KTLSR--KT Line Status Register (KT--D23:F3)....................................... 955 23.10.11 KTMSR--KT Modem Status Register (KT--D23:F3).................................. 956 Figures 2-1 2-2 4-1 5-1 5-2 5-3 5-4 5-5 5-6 5-7 5-8 5-9 5-10 5-11 5-12 5-13 5-14 5-15 5-16 5-17 5-18 5-19 5-20 6-1 6-2 6-3 6-4 6-5 6-6 7-1 7-2 7-3 8-1 8-2 32 PCH Interface Signals Block Diagram ......................................................................60 Example External RTC Circuit.................................................................................97 PCH High-Level Clock Diagram ............................................................................. 121 Generation of SERR# to Platform ......................................................................... 130 LPC Interface Diagram ........................................................................................ 140 PCH DMA Controller............................................................................................ 144 DMA Request Assertion through LDRQ# ................................................................ 147 TCO Legacy/Compatible Mode SMBus Configuration ................................................ 194 Advanced TCO Mode ........................................................................................... 196 Serial Post over GPIO Reference Circuit ................................................................. 198 Flow for Port Enable / Device Present Bits.............................................................. 206 Serial Data transmitted over the SGPIO Interface ................................................... 210 EHCI with USB 2.0 with Rate Matching Hub ........................................................... 226 PCH Intel(R) Management Engine High-Level Block Diagram ...................................... 256 Flash Partition Boundary ..................................................................................... 260 Flash Descriptor Sections .................................................................................... 261 Analog Port Characteristics .................................................................................. 270 LVDS Signals and Swing Voltage .......................................................................... 272 LVDS Clock and Data Relationship ........................................................................ 272 Panel Power Sequencing ..................................................................................... 273 HDMI Overview.................................................................................................. 274 DP Overview...................................................................................................... 275 SDVO Conceptual Block Diagram .......................................................................... 277 PCH Ballout (top view--left side) (Desktop) ........................................................... 284 PCH Ballout (top view--right side) (Desktop) ......................................................... 285 PCH ballout (top View--Leff side) (Mobile Only) ...................................................... 295 PCH ballout (top View--right side) (Mobile Only)..................................................... 296 PCH ballout (top view--left side) (Mobile SFF Only) ................................................. 307 PCH ballout (top view--right side) (Mobile SFF Only) ............................................... 308 PCH Desktop Package Drawing............................................................................. 320 PCH B-Step Mobile Package Drawing..................................................................... 322 PCH Mobile SFF Package Drawing ......................................................................... 324 G3 w/RTC Loss to S4/S5 Timing Diagram .............................................................. 363 S5 to S0 Timing Diagram .................................................................................... 363 Datasheet 8-3 8-4 8-5 8-6 8-7 8-8 8-9 8-11 8-12 8-13 8-10 8-14 8-15 8-16 8-17 8-18 8-19 8-20 8-21 8-22 8-23 8-24 8-25 8-26 8-27 8-28 8-29 8-30 8-31 Tables S3/M3 to S0 Timing Diagram............................................................................... 364 S5/Moff - S5/M3 Timing Diagram ......................................................................... 364 S0 to S5 Timing Diagram .................................................................................... 365 DRAMPWRGD Timing Diagram ............................................................................. 365 Clock Cycle Time ............................................................................................... 366 Transmitting Position (Data to Strobe).................................................................. 366 Clock Timing ..................................................................................................... 366 Setup and Hold Times ........................................................................................ 367 Float Delay ....................................................................................................... 367 Pulse Width....................................................................................................... 367 Valid Delay from Rising Clock Edge ...................................................................... 367 Output Enable Delay .......................................................................................... 368 USB Rise and Fall Times ..................................................................................... 368 USB Jitter ......................................................................................................... 368 USB EOP Width ................................................................................................. 369 SMBus/SMLINK Transaction ................................................................................ 369 SMBus/SMLINK Timeout ..................................................................................... 369 SPI Timings ...................................................................................................... 370 Intel(R) High Definition Audio Input and Output Timings ........................................... 370 Dual Channel Interface Timings ........................................................................... 371 Dual Channel Interface Timings ........................................................................... 371 LVDS Load and Transition Times .......................................................................... 371 Transmitting Position (Data to Strobe).................................................................. 372 PCI Express Transmitter Eye ............................................................................... 372 PCI Express Receiver Eye.................................................................................... 373 Measurement Points for Differential Waveforms. .................................................... 374 PCH Test Load ................................................................................................... 375 Controller Link Receive Timings ........................................................................... 375 Controller Link Receive Slew Rate ........................................................................ 375 1-1 1-2 1-3 1-4 1-5 2-1 2-2 2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 2-24 2-25 2-26 2-27 2-28 3-1 Industry Specifications ......................................................................................... 44 PCI Devices and Functions .................................................................................... 48 Intel(R) 5 Series Chipset Desktop SKUs .................................................................... 55 Intel(R) 5 Series Chipset Mobile SKUs....................................................................... 56 Intel(R) 3400 Series Chipset Server SKUs ................................................................. 57 Direct Media Interface Signals ............................................................................... 61 PCI Express* Signals............................................................................................ 61 Firmware Hub Interface Signals ............................................................................. 62 PCI Interface Signals............................................................................................ 63 Serial ATA Interface Signals .................................................................................. 65 LPC Interface Signals ........................................................................................... 68 Interrupt Signals ................................................................................................. 68 USB Interface Signals........................................................................................... 69 Power Management Interface Signals ..................................................................... 71 Processor Interface Signals ................................................................................... 74 SM Bus Interface Signals ...................................................................................... 74 System Management Interface Signals ................................................................... 75 Real Time Clock Interface ..................................................................................... 75 Miscellaneous Signals ........................................................................................... 76 Intel(R) High Definition Audio Link Signals................................................................. 77 Controller Link Signals.......................................................................................... 78 Serial Peripheral Interface (SPI) Signals.................................................................. 78 Intel(R) Quiet System Technology Signals ................................................................. 79 JTAG Signals ....................................................................................................... 80 Clock Interface Signals ......................................................................................... 80 LVDS Interface Signals ......................................................................................... 82 Analog Display Interface Signals ............................................................................ 83 Intel(R) Flexible Display Interface Signals ................................................................. 84 Digital Display Interface Signals............................................................................. 84 General Purpose I/O Signals.................................................................................. 87 Manageability Signals ........................................................................................... 90 Power and Ground Signals .................................................................................... 91 Functional Strap Definitions................................................................................... 93 Integrated Pull-Up and Pull-Down Resistors ............................................................. 99 Datasheet 33 3-2 3-3 3-4 3-5 4-1 4-2 5-1 5-2 5-3 5-4 5-5 5-6 5-7 5-8 5-9 5-10 5-11 5-12 5-13 5-14 5-15 5-16 5-17 5-18 5-19 5-20 5-21 5-22 5-23 5-24 5-25 5-26 5-27 5-28 5-29 5-30 5-31 5-32 5-33 5-34 5-35 5-36 5-37 5-38 5-39 5-40 5-41 5-42 5-43 5-44 5-45 5-46 5-47 5-48 5-49 5-50 5-51 5-52 5-53 5-54 5-55 5-56 5-57 5-58 5-59 5-60 6-1 34 Power Plane and States for Output and I/O Signals for Desktop Configurations ........... 101 Power Plane and States for Output and I/O Signals for Mobile Configurations ............. 106 Power Plane for Input Signals for Desktop Configurations ........................................ 112 Power Plane for Input Signals for Mobile Configurations ........................................... 115 PCH System Clock Inputs .................................................................................... 119 PCH System Clock Outputs .................................................................................. 120 PCI Bridge Initiator Cycle Types ........................................................................... 123 Type 1 Address Format ....................................................................................... 126 MSI versus PCI IRQ Actions ................................................................................. 128 LAN Mode Support.............................................................................................. 135 LPC Cycle Types Supported ................................................................................. 140 Start Field Bit Definitions..................................................................................... 141 Cycle Type Bit Definitions .................................................................................... 141 Transfer Size Bit Definition .................................................................................. 141 SYNC Bit Definition ............................................................................................. 142 DMA Transfer Size .............................................................................................. 145 Address Shifting in 16-Bit I/O DMA Transfers ......................................................... 146 Counter Operating Modes .................................................................................... 151 Interrupt Controller Core Connections ................................................................... 153 Interrupt Status Registers ................................................................................... 154 Content of Interrupt Vector Byte .......................................................................... 154 APIC Interrupt Mapping1 ..................................................................................... 160 Stop Frame Explanation ...................................................................................... 163 Data Frame Format ............................................................................................ 164 Configuration Bits Reset by RTCRST# Assertion...................................................... 167 INIT# Going Active............................................................................................. 169 NMI Sources...................................................................................................... 170 General Power States for Systems Using the PCH ................................................... 171 State Transition Rules for the PCH ........................................................................ 172 System Power Plane ........................................................................................... 173 Causes of SMI and SCI ....................................................................................... 174 Sleep Types....................................................................................................... 178 GPI Wake Events ............................................................................................... 180 Transitions Due to Power Failure .......................................................................... 181 Transitions Due to Power Button .......................................................................... 182 Transitions Due to RI# Signal .............................................................................. 183 Write Only Registers with Read Paths in ALT Access Mode........................................ 185 PIC Reserved Bits Return Values .......................................................................... 187 Register Write Accesses in ALT Access Mode .......................................................... 187 SLP_LAN# Pin Behavior ...................................................................................... 189 Causes of Host and Global Resets ......................................................................... 191 Event Transitions that Cause Messages ................................................................. 195 Multi-activity LED message type ........................................................................... 209 Legacy Replacement Routing ............................................................................... 212 Debug Port Behavior........................................................................................... 220 I2C Block Read................................................................................................... 230 Enable for SMBALERT# ....................................................................................... 232 Enables for SMBus Slave Write and SMBus Host Events ........................................... 233 Enables for the Host Notify Command ................................................................... 233 Slave Write Registers.......................................................................................... 234 Command Types ................................................................................................ 235 Slave Read Cycle Format..................................................................................... 236 Data Values for Slave Read Registers.................................................................... 236 Host Notify Format ............................................................................................. 239 I2C Write Commands to the ME ............................................................................ 243 Block Read Command - Byte Definition ................................................................. 244 Processor Core Read Data Definition ..................................................................... 246 Region Size versus Erase Granularity of Flash Components ...................................... 259 Region Access Control Table ................................................................................ 262 Hardware Sequencing Commands and Opcode Requirements ................................... 265 Flash Protection Mechanism Summary .................................................................. 266 Recommended Pinout for 8-Pin Serial Flash Device ................................................. 267 Recommended Pinout for 16-Pin Serial Flash Device ............................................... 268 PCH supported Audio formats over HDMI and DisplayPort* ...................................... 276 PCH Digital Display Port Pin Mapping..................................................................... 278 Display Co-Existence Table .................................................................................. 279 PCH Ballout by Signal name (Desktop Only)........................................................... 286 Datasheet 6-2 6-3 8-1 8-2 8-3 8-4 8-5 8-6 8-7 8-8 8-9 8-10 8-11 8-12 8-13 8-14 8-15 8-16 8-17 8-18 8-19 8-20 8-21 8-22 PCH Ballout by Signal name (Mobile Only)............................................................. 297 PCH Ballout by Signal name (Mobile SFF Only)....................................................... 309 Storage Conditions............................................................................................. 325 Mobile Thermal Design Power .............................................................................. 326 PCH Absolute Maximum Ratings........................................................................... 326 PCH Power Supply Range.................................................................................... 327 Measured ICC (Desktop Only) ............................................................................. 327 Measured ICC (Mobile Only)................................................................................ 328 Measured ICC (SFF Only) ................................................................................... 329 DC Characteristic Input Signal Association............................................................. 330 DC Input Characteristics ..................................................................................... 332 DC Characteristic Output Signal Association .......................................................... 334 DC Output Characteristics ................................................................................... 337 Other DC Characteristics..................................................................................... 339 Signal Groups ................................................................................................... 340 CRT DAC Signal Group DC Characteristics: Functional Operating Range (VccADAC = 3.3 V 5%) .................................................................................... 340 LVDS Interface: Functional Operating Range (VccALVDS = 3.3 V 5%) .................... 341 Display Port Auxiliary Signal Group DC Characteristics ............................................ 341 PCI Express* Interface Timings ........................................................................... 342 HDMI Interface Timings (DDP[D:B][3:0]).............................................................. 343 SDVO Interface Timings...................................................................................... 343 DisplayPort Interface Timings (DDP[D:B][3:0])...................................................... 344 DisplayPort Aux Interface ................................................................................... 345 DDC Characteristics DDC Signals: CRT_DDC_CLK, CRT_DDC_DATA, L_DDC_CLK, L_DDC_DATA, SDVO_CTRLCLK, SDVO_CTRLDATA, DDP[D:C]_CTRLCLK, DDP[D:C]_CTRLDATA ....................................................................................................... 8-23 8-24 8-25 8-26 8-27 8-28 8-29 8-30 8-31 8-32 8-33 8-34 8-35 8-36 8-37 8-38 8-39 9-1 9-2 9-3 9-4 10-1 11-1 12-1 13-1 13-2 13-3 13-4 13-5 13-6 13-7 13-8 13-9 13-10 13-11 13-12 13-13 14-1 14-2 Datasheet 345 LVDS Interface AC characteristics at Various Frequencies ........................................ 346 CRT DAC AC Characteristics ................................................................................ 348 Clock Timings.................................................................................................... 348 PCI Interface Timing .......................................................................................... 352 Universal Serial Bus Timing ................................................................................. 353 SATA Interface Timings ...................................................................................... 354 SMBus Timing ................................................................................................... 354 Intel(R) High Definition Audio Timing ...................................................................... 355 LPC Timing ....................................................................................................... 355 Miscellaneous Timings ........................................................................................ 356 SPI Timings (20 MHz)......................................................................................... 356 SPI Timings (33 MHz)......................................................................................... 357 SPI Timings (50 MHz)......................................................................................... 357 SST Timings...................................................................................................... 358 PECI Timings..................................................................................................... 359 Controller Link Receive Timings ........................................................................... 359 Power Sequencing and Reset Signal Timings.......................................................... 360 PCI Devices and Functions .................................................................................. 378 Fixed I/O Ranges Decoded by Intel(R) PCH.............................................................. 379 Variable I/O Decode Ranges ................................................................................ 382 Memory Decode Ranges from Processor Perspective ............................................... 383 Chipset Configuration Register Memory Map (Memory Space) .................................. 387 PCI Bridge Register Address Map (PCI-PCI--D30:F0) .............................................. 435 Gigabit LAN Configuration Registers Address Map (Gigabit LAN--D25:F0) ....................................................................................... 453 LPC Interface PCI Register Address Map (LPC I/F--D31:F0) ..................................... 467 DMA Registers................................................................................................... 492 PIC Registers .................................................................................................... 503 APIC Direct Registers ......................................................................................... 511 APIC Indirect Registers....................................................................................... 511 RTC I/O Registers .............................................................................................. 516 RTC (Standard) RAM Bank .................................................................................. 517 Processor Interface PCI Register Address Map ....................................................... 521 Power Management PCI Register Address Map (PM--D31:F0)................................... 524 APM Register Map .............................................................................................. 531 ACPI and Legacy I/O Register Map ....................................................................... 532 TCO I/O Register Address Map............................................................................. 551 Registers to Control GPIO Address Map................................................................. 558 SATA Controller PCI Register Address Map (SATA-D31:F2)...................................... 571 Bus Master IDE I/O Register Address Map ............................................................. 600 35 14-3 14-4 14-5 15-1 15-2 16-1 16-2 16-3 16-4 17-1 17-2 18-1 18-2 19-1 20-1 21-1 21-2 22-1 22-2 23-1 23-1 23-2 23-3 23-4 23-5 23-6 23-7 23-8 36 AHCI Register Address Map ................................................................................. 608 Generic Host Controller Register Address Map ........................................................ 609 Port [5:0] DMA Register Address Map ................................................................... 619 SATA Controller PCI Register Address Map (SATA-D31:F5) ...................................... 637 Bus Master IDE I/O Register Address Map ............................................................. 655 USB EHCI PCI Register Address Map (USB EHCI--D29:F0, D26:F0) ........................... 663 Enhanced Host Controller Capability Registers........................................................ 685 Enhanced Host Controller Operational Register Address Map .................................... 688 Debug Port Register Address Map ......................................................................... 701 Intel(R) High Definition Audio PCI Register Address Map (Intel(R) High Definition Audio D27:F0) ................................................................... 705 Intel(R) High Definition Audio PCI Register Address Map (Intel(R) High Definition Audio D27:F0) ................................................................... 728 SMBus Controller PCI Register Address Map (SMBus--D31:F3) ................................. 757 SMBus I/O and Memory Mapped I/O Register Address Map ...................................... 764 PCI Express* Configuration Registers Address Map (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/) .................................................... 775 Memory-Mapped Registers .................................................................................. 815 Serial Peripheral Interface (SPI) Register Address Map (SPI Memory Mapped Configuration Registers) ....................................................... 823 Gigabit LAN SPI Flash Program Register Address Map (GbE LAN Memory Mapped Configuration Registers)................................................ 846 Thermal Sensor Register Address Map................................................................... 859 Thermal Memory Mapped Configuration Register Address Map.................................. 868 Intel(R) MEI Configuration Registers Address Map (MEI--D22:F0)................................................................................................... 887 MEI1 Configuration Registers Address Map (MEI--D22:F1)................................................................................................... 899 MEI MMIO Register Address Map (VE--D23:F0) ...................................................... 909 MEI MMIO Register Address Map (VE--D23:F0) ...................................................... 912 IDE Function for remote boot and Installations PT IDER Register Address Map............ 915 IDE BAR0 Register Address Map ........................................................................... 924 IDE BAR4 Register Address Map ........................................................................... 935 Serial Port for Remote Keyboard and Text (KT) Redirection Register Address Map...................................................................................................... 942 KT IO/ Memory Mapped Device Register Address Map ............................................. 949 Datasheet Revision History Revision Number Description 001 * Initial release. 002 * * * * * * * * * * * * * * * * * * * * * * SATA Port Multiplier Removal 1.5V On-Die PLL Voltage Regulator Support Removal Update on Note 9 for Table 2-25, "General Purpose I/O Signal" Updated GPIO15 and GPIO27 in Table 2-28, "Functional Strap Definition" Added Measure Icc for SFF Table Updated Measured Icc for Desktop and Mobile Tables Updated Table 2-20 CLKOUTFLEX0 type Updated PCIe Port Configurations Updated PME_B0_S5_DIS Bit Discription Updated Section 5.14.2.2 Advanced TCO Mode Updated Table 9-9 Other DC Characteristics Updated GCAP_ID Default Value Updated t240 and t218 Power Sequencing and Reset Signal Timings Added XTAL25 DC and AC Characteristics Added CEV1 Core Energy Value 1 Register to Section 22.2 Updated Section 14.4.1.11 VSP - Vendor Specific Default Value Updated Desktop SKUs Definitions Added BCLK Input to AC Characteristics Updated MPC2- Miscellaneous Port Configuration Register 2 Updated DMIC - DMI Control Register Description Updated NV_CLE Nomical pull-down in Table 3-1. Integrated Pull-ups and Pull-Downs Updated Section 10.1.62 BUC - Backed Up Control Register * * * Addeed Intel(R) B55 Express Chipset Updated bit description for USBIRA--USB Initialization Register A Updated Table 2-29. Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Device and Revision ID Table. Updated bit description for GP_RST_SEL1 -- GPIO Reset Select register Updated bit description for GP_RST_SEL2 -- GPIO Reset Select register Updated bit description for GP_RST_SEL3 -- GPIO Reset Select register Update Table 3-1 to include SPI_CS0# Updated Table 8-1, Storage Conditions Added Section 5.27.2.9 through Section 5.27.2.14 Updated Table 8-14, PCI Express* Interface Timings Updated Section 21.1.2, HSFS--Hardware Sequencing Flash Status Register 003 Datasheet * * * * * * * * Revision Date September 2009 January 2010 June 2010 37 Revision Number Description * * * * * * * * * * * 004 * * * * * * * * * * * * * * * * * * 38 Updated Table 1-1, Industry Standards Updated Section 1.2, Overview -- Updated the initial set of bullets -- Updated Intel(R) Active Management Technology Section -- Updated Serial Over Lan (SOL) Function Section -- Added KVM Section -- Updated IDE-R Function Section -- Added PCH Display Interface Section -- Added Intel(R) Flexible Display Interconnect (FDI) Section Updated Table 2-5, Serial ATA Interface Signals -- Added TEMP_ALERT# to the SATA5GP /GPIO49 / TEMP_ALERT# Signals -- SCLOCK/GPIO22 Signal Added note under Table 2-7, "Interrupt Signals" Updated Table 2-8, "USB Interface Signals" Overcurrent Indicators description. Updated Table 2-9, "Power Management Interface Signals" description for SLP_LAN#/ GPIO29. Update Table 2-15, "Intel High Definition Audio LInk Signals" description for HDA_DOCK_RST#/GPIO13. Added Note 12 to Table 2-25, "General Purpose I/O SIgnals". Updated Table 2-27, "Power and Ground Signals" description for DcpSusByp. Updated Table 2-28, "Functional Strap Definitions" Comment column for GNT3#/ GPIO55. Updated Table 2-29, "Intel 5 Series Chipset and Intel 3400 Series Chipset Device and Revision ID Table". Added Note to Section 5.2, "PCI Express* Root Ports (D28:F0, F1,F2,F3,F4,F5,F6,F7)". Added note on wake up settings to Section 5.3.4.1.1, "Advanced Power Management Wake Up" and Section 5.3.4.1.2, "ACPI Power Management Wake Up". Updated Table 5-27, "Causes of Wake Events". "Added Section 5.13.10.5, "SLP_LAN# Pin Behavior" and Section 5.13.10.6, "RTCRST# and SRTCRST#". Updated Section 5.13.13, "Reset Behavior". Updated Section 5.14.2.2, "Advanced TCO Mode". Updated Section 5.16.11, "SGPIO Signals". Added note to Block Read/Write command in Section 5.20.1.1, "Command Protocols" for the SMBus Host Controller. Updated Section 5.27, "PCH Display Interfaces". Updated Section 8.2, "Absolute Maximum and Minimum Ratings". Updated VOL3 and VOH3 in Table 8-10, "DC Output Characteristics". Updated VccVRM in Table 8-11, "Other DC Characteristics". Also, Added Note 3 to the table. Added notes to Table 8-16, "PCI Express* Interface Timings", Table 8-17, "HDMI Interface Timings", and Table 8-18, "SDVO Interface Timings". Added SMLink0 Clock timings to Table 8-24, "Clock Timings". Updated Table 8-28, "SMBus Timing". Updated Table 8-37, "Controller Link Receive Timings". Added Note 18 to Table 8-18, "Power Sequencing and Reset Signal Timings" for LAN_RST# timing. Added Figure 8-30, "Controller Link Receive Timings" and Figure 8-31, "Controller Link Receive Slew Rate". Revision Date January 2012 Datasheet Revision Number Description * * * * * * * * * * * 004 * * * * * * * * * * * * * * * * * * Datasheet Chapter 9, "Register and Memory Mapping" -- Added R/WL register access attribute definition and updated the definition for "Default". -- Added notes to Table 9-1, "PCI Devices and Functions". -- Updated Table 9-2, "Fixed I/O Ranges Decoded by Intel PCH". -- Updated Table 9-3, "Variable I/O Decode Ranges". -- Updated Table 9-4, "Memory Decode Ranges from Processor Perspective". -- Updated Section 9.4.1, "Boot-Block Update Scheme". Updated Section 10.1.9, "LCAP--Link Capabilities Register" Bits 17:15 L1 Exit Latency (EL1). Updated Section 10.1.10, "LCTL--Link Control Register". Updated Section 10.1.15, "RPFN--Root Port Function Number and Hide for PCI Express* Root Ports" for bits 30:28 and 26:24. Updated Section 10.1.43, "OIC-- Other Interrupt Control Register" note below table. Updated Section 10.1.62, "BUC--Backed Up control Register" bit 5 and bit 0. Updated Section 10.1.64, "CG--Clock Gating Register" bits 29:28. Updated Section 10.1.69, "USBOCM2--Overcurrent MAP Register 2". Added Section 13.1.12, "CAPP--Capability List Pointer Register (LPC I/F--D31:Fo) Updated Section 14.1.22, "IDE_TIM--IDE Timing Register (SATA-D31:F2)". Added Section 14.1.23, "SIDETIM--Slave IDE Timing Register", Section 14.1.24, "SDMA_CNT--Synchronous DMA Control Register", Section 14.1.25, "SDMA_TIM--Synchronous DMA Timing Register", and Section 14.1.26, "IDE_CONFIG--IDE I/O COnfiguration Register". Updated Section 14.1.37, "SCLKGC--SATA Clock General Configuration Register". Updated Section 14.3.2.3, "PxSERR--Serial ATA Error Register (B31:F2)" bit 23. Updated Section 14.4.1.10, "RSTF--RST Feature Capabilities Register" bit 7. Updated Section 14.4.1.12, "Intel(R) RST Feature Capabilities". Updated Section 14.4.2.5, "PxIS--Port [5:0] Interrupt Status Register (D31:F2)" and Section 14.4.2.6, "PxIE--Port [5:0] Interrupt Enable Register 9D31:F2)" Updated Section 15.1.21, "IDE_TIM--IDE Timing Register (SATA-D31:F5)" Added Section 15.1.22, "SDMA_CNT--Synchronous DMA Control Register", Section 15.1.23, "SDMB_TIM--Synchronous DMA Timing Register", and Section 15.1.24, "IDE_CONFIG--IDE I/O COnfiguration Register". Added note to Section 16.1, "USB EHCI Configuration Registers (USB EHCI--D29:F0, D26:F0)". Updated Section 16.1.20, "PWR_CNTL_STS--Power Managment Control/Status Register" bits 1:0. Updated Section 16.1.31, "EHCIR1--EHCI Initialization Register 1" Added Section 16.1.32, "EHCIIR2--EHCI Initialization Register 2, Section 16.1.38, "EHCIIR3--EHCI Initialization Register 3", and Section 16.1.39, "EHCIIR4--EHCI Initialization Register 4". Added Section 17.1.20, "HDINIT1--Intel High Definition Audio Initialization Register 1". Updated Section 17.2.15, "SSYNC--Stream Synchronization Register". Added note to Section 19.1, "PCI Express Configuration Registers (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7)". Updated Section 21.1.2, "HSFS--Hardware Sequencing Flash Status Register" bit 13 and Section 21.4.2, "HSFS--Hardware Sequencing Flash Status Register" bit 13 Updated Section 22.1.3, "CMD--Command" bit 2. Updated Section 22.2.5, "TSTTP--Thermal Sensor Temperature Trip Point Register" bits 23:16. Updated Section 22.2.12, "PTA--PCH Temperature Adjust". Revision Date January 2012 39 Platform Controller Hub (PCH) Features Direct Media Interface 40 -- 10 Gb/s each direction, full duplex -- Transparent to software PCI Express* -- NEW: 8 PCI Express root ports -- NEW: PCI Express 2.0 specification running at 2.5 GT/s. -- NEW: Ports 1-4 or Ports 5-8 can independently be configured to support four x1s, two x2s, one x2 and 2 x1s, or one x4 port widths. -- Support for full 2.5 Gb/s bandwidth in each direction per x1 lane -- Module based Hot-Plug supported (such as, ExpressCard*) PCI Bus Interface -- Supports PCI Rev 2.3 Specification at 33 MHz -- Four available PCI REQ/GNT pairs -- Support for 64-bit addressing on PCI using DAC protocol Integrated Serial ATA Host Controller -- Up to six SATA ports -- Data transfer rates up to 3.0 Gb/s (300 MB/s). -- Integrated AHCI controller External SATA support -- NEW: Port Disable Capability Intel(R) Rapid Storage Technology -- Configures the PCH SATA controller as a RAID controller supporting RAID 0/1/5/10 Intel(R) High Definition Audio Interface -- PCI Express endpoint -- Independent Bus Master logic for eight general purpose streams: four input and four output -- Support four external Codecs -- Supports variable length stream slots -- Supports multichannel, 32-bit sample depth, 192 kHz sample rate output -- Provides mic array support -- Allows for non-48 kHz sampling output -- Support for ACPI Device States -- Low Voltage Mode Intel(R) Quiet System Technology -- Four TACH signals and Four PWM signals Simple Serial Transport (SST) 1.0 Bus and Platform Environmental Control Interface (PECI) USB 2.0 -- Two EHCI Host Controllers, supporting up to fourteen external ports -- Per-Port-Disable Capability -- Includes up to two USB 2.0 High-speed Debug Ports -- Supports wake-up from sleeping states S1-S4 -- Supports legacy Keyboard/Mouse software Integrated Gigabit LAN Controller -- NEW: PCI Express* connection -- Integrated ASF Management Controller -- Network security with System Defense -- Supports IEEE 802.3 -- 10/100/1000 Mbps Ethernet Support -- Jumbo Frame Support Intel(R) Active Management Technology with System Defense -- NEW: Network Outbreak Containment Heuristics Intel(R) I/O Virtualization (VT-d) Support Intel(R) Trusted Execution Technology Support Power Management Logic -- Supports ACPI 4.0a -- ACPI-defined power states (system level S0, S1, S3, S4, and S5 states, various internal device levels of Dx states, and processor driven C states) -- ACPI Power Management Timer -- SMI# generation -- All registers readable/restorable for proper resume from 0 V suspend states -- Support for A-based legacy power management for non-ACPI implementations External Glue Integration -- Integrated Pull-up, Pull-down and Series Termination resistors on processor interface -- Integrated Pull-down and Series resistors on USB Enhanced DMA Controller -- Two cascaded 8237 DMA controllers -- Supports LPC DMA Datasheet SMBus -- Faster speed, up to 100 kbps -- Flexible SMBus/SMLink architecture to optimize for ASF -- Provides independent manageability bus through SMLink interface -- Supports SMBus 2.0 Specification -- Host interface allows processor to communicate using SMBus -- Slave interface allows an internal or external Microcontroller to access system resources -- Compatible with most two-wire components that are also I2C compatible High Precision Event Timers -- Advanced operating system interrupt scheduling Timers Based on 8254 -- System timer, Refresh request, Speaker tone output Real-Time Clock -- 256-byte battery-backed CMOS RAM -- Integrated oscillator components -- Lower Power DC/DC Converter implementation System TCO Reduction Circuits -- Timers to generate SMI# and Reset upon detection of system hang -- Timers to detect improper processor reset -- Integrated processor frequency strap logic -- Supports ability to disable external devices Serial Peripheral Interface (SPI) -- Supports up to two SPI devices -- Supports 20 MHz, 33 MHz, and 50 MHz SPI devices -- Support up to two different erase granularities Note: Interrupt Controller -- Supports up to eight PCI interrupt pins -- Supports PCI 2.3 Message Signaled Interrupts -- Two cascaded 8259 with 15 interrupts -- Integrated I/O APIC capability with 24 interrupts -- Supports Processor System Bus interrupt delivery 1.05 V operation with 1.5 V and 3.3 V I/O -- 5 V tolerant buffers on PCI, USB and selected Legacy signals 1.05 V Core Voltage Five Integrated Voltage Regulators for different power rails Firmware Hub Interface supports BIOS Memory size up to 8 MB Low Pin Count (LPC) I/F -- Supports two Master/DMA devices. -- Support for Security Device (Trusted Platform Module) connected to LPC. GPIO -- TTL, Open-Drain, Inversion -- GPIO lock down Package -- 27 mm x 27 mm FCBGA (Desktop Only) -- 27 mm x 25 mm FCBGA (Mobile Only) -- 22 mm x 20 mm FCBGA (Mobile SFF Only) Analog Display Port Digital Display -- Three Digital Display ports capable of supporting HDMI/DVI and Display port -- One Digital Display port supporting SDVO -- LDVS (Mobile Only) Intel(R) Anti-Theft Technology JTAG -- Boundary Scan for testing during board manufacturing Not all features are available on all PCH SKUs. See Section 1.3 for more details. Datasheet 41 42 Datasheet Introduction 1 Introduction 1.1 About This Manual This document is intended for Original Equipment Manufacturers and BIOS vendors creating Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset based products. This document is for the following components: * Intel(R) 5 Series Chipset -- Intel(R) P55 Express Chipset -- Intel(R) H55 Express Chipset -- Intel(R) H57 Express Chipset -- Intel(R) Q57 Express Chipset -- Intel(R) B55 Express Chipset -- Intel(R) PM55 Express Chipset -- Intel(R) QM57 Express Chipset -- Intel(R) HM55 Express Chipset -- Intel(R) HM57 Express Chipset -- Intel(R) QS57 Express Chipset * Intel(R) 3400 Series Chipset -- Intel(R) 3400 Chipset -- Intel(R) 3420 Chipset -- Intel(R) 3450 Chipset Section 1.3 provides high-level feature differences for the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset. Note: Throughout this document, PCH is used as a general term and refers to the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset, unless specifically noted otherwise. Note: Throughout this document, the term "Desktop" refers to information that is for the Intel(R) P55 Express Chipset, Intel(R) H55 Express Chipset, Intel(R) H57 Express Chipset, Intel(R) Q57 Express Chipset, Intel(R) B55 Express Chipset, Intel(R) 3400 Chipset, Intel(R) 3420 Chipset, Intel(R) 3450 Chipset, unless specifically noted otherwise. Throughout this document, the term "Mobile Only" refers to information that is for the Intel(R) PM55 Express Chipset, Intel(R) QM57 Express Chipset, Intel(R) HM55 Express Chipset, Intel(R) HM57 Express Chipset, and the Intel(R) QS57 Express Chipset, unless specifically noted otherwise. This manual assumes a working knowledge of the vocabulary and principles of PCI Express*, USB, AHCI, SATA, Intel(R) High Definition Audio (Intel(R) HD Audio), SMBus, PCI, ACPI, and LPC. Although some details of these features are described within this manual, see the individual industry specifications listed in Table 1-1 for the complete details. Datasheet 43 Introduction Table 1-1. Industry Specifications Specification 44 Location PCI Express* Base Specification, Revision 1.1 http://www.pcisig.com/specifications PCI Express* Base Specification, Revision 2.0 http://www.pcisig.com/specifications Low Pin Count Interface Specification, Revision 1.1 (LPC) http://developer.intel.com/design/ chipsets/industry/lpc.htm System Management Bus Specification, Version 2.0 (SMBus) http://www.smbus.org/specs/ PCI Local Bus Specification, Revision 2.3 (PCI) http://www.pcisig.com/specifications PCI Power Management Specification, Revision 1.2 http://www.pcisig.com/specifications SFF-8485 Specification for Serial GPIO (SGPIO) Bus, Revision 0.7 ftp://ftp.seagate.com/sff/SFF-8485.PDF Advanced Host Controller Interface specification for Serial ATA, Revision 1.2 http://www.intel.com/technology/ serialata/ahci.htm Intel(R) High Definition Audio Specification, Revision 1.0 http://www.intel.com/standards/ hdaudio/ Universal Serial Bus Specification (USB), Revision 2.0 http://www.usb.org/developers/docs Advanced Configuration and Power Interface, Version 3.0b (ACPI) http://www.acpi.info/spec.htm Enhanced Host Controller Interface Specification for Universal Serial Bus, Revision 1.0 (EHCI) http://developer.intel.com/technology/ usb/ehcispec.htm Serial ATA Specification, Revision 2.5 http://www.serialata.org/ Serial ATA II: Extensions to Serial ATA 1.0, Revision 1.0 http://www.serialata.org/ Serial ATA II Cables and Connectors Volume 2 Gold http://www.serialata.org/ Alert Standard Format Specification, Version 1.03 http://www.dmtf.org/standards/asf IEEE 802.3 Fast Ethernet http://standards.ieee.org/getieee802/ AT Attachment - 6 with Packet Interface (ATA/ATAPI 6) http://T13.org (T13 1410D) IA-PC HPET (High Precision Event Timers) Specification, Revision 0.98a http://www.intel.com/hardwaredesign/ hpetspec.htm TPM Specification 1.02, Level 2 Revision 103 http://www.trustedcomputinggroup.org/ specs/TPM Intel(R) Virtualization Technology http://www.intel.com/technology/ platform-technology/virtualization/ index.htm Datasheet Introduction Chapter 1. Introduction Chapter 1 introduces the PCH and provides information on manual organization and gives a general overview of the PCH. Chapter 2. Signal Description Chapter 2 provides a block diagram of the PCH and a detailed description of each signal. Signals are arranged according to interface and details are provided as to the drive characteristics (Input/Output, Open Drain, etc.) of all signals. Chapter 3. PCH Pin States Chapter 3 provides a complete list of signals, their associated power well, their logic level in each power state, and their logic level before and after reset. Chapter 4. PCH and System Clock Domains Chapter 4 provides a list of each clock domain associated with the PCH in an Intel(R) 5 Series Chipset or Intel(R) 3400 Series Chipset based system. Chapter 5. Functional Description Chapter 5 provides a detailed description of the functions in the PCH. All PCI buses, devices and functions in this manual are abbreviated using the following nomenclature; Bus:Device:Function. This manual abbreviates buses as B0 and B1, devices as D22, D25, D25, D26, D27, D28, D29, D30 and D31 and functions as F0, F1, F2, F3, F4, F5, F6 and F7. For example Device 31 Function 0 is abbreviated as D31:F0, Bus 1 Device 8 Function 0 is abbreviated as B1:D8:F0. Generally, the bus number will not be used, and can be considered to be Bus 0. Note that the PCH external PCI bus is typically Bus 1, but may be assigned a different number depending upon system configuration. Chapter 6. Ballout Definition Chapter 6 provides a table of each signal and its ball assignment in the package. Chapter 7. Package Information Chapter 7 provides drawings of the physical dimensions and characteristics of the package. Chapter 8. Electrical Characteristics Chapter 8 provides all AC and DC characteristics including detailed timing diagrams. Chapter 9. Register and Memory Mappings Chapter 9 provides an overview of the registers, fixed I/O ranges, variable I/O ranges and memory ranges decoded by the PCH. Chapter 10. Chipset Configuration Registers Chapter 10 provides a detailed description of all registers and base functionality that is related to chipset configuration and not a specific interface (such as LPC, PCI, or PCI Express*). It contains the root complex register block, which describes the behavior of the upstream internal link. Chapter 11. PCI-to-PCI Bridge Registers Chapter 11 provides a detailed description of all registers that reside in the PCI-to-PCI bridge. This bridge resides at Device 30, Function 0 (D30:F0). Chapter 12. Integrated LAN Controller Registers Chapter 12 provides a detailed description of all registers that reside in the PCH's integrated LAN controller. The integrated LAN Controller resides at Device 25, Function 0 (D25:F0). Chapter 13. LPC Bridge Registers Chapter 13 provides a detailed description of all registers that reside in the LPC bridge. This bridge resides at Device 31, Function 0 (D31:F0). This function contains registers for many different units within the PCH including DMA, Timers, Interrupts, Processor Interface, GPIO, Power Management, System Management and RTC. Datasheet 45 Introduction Chapter 14. SATA Controller Registers Chapter 14 provides a detailed description of all registers that reside in the SATA controller #1. This controller resides at Device 31, Function 2 (D31:F2). Chapter 15. SATA Controller Registers Chapter 15 provides a detailed description of all registers that reside in the SATA controller #2. This controller resides at Device 31, Function 5 (D31:F5). Chapter 16. EHCI Controller Registers Chapter 16 provides a detailed description of all registers that reside in the two EHCI host controllers. These controllers reside at Device 29, Function 0 (D29:F0) and Device 26, Function 0 (D26:F0). Chapter 17. Intel(R) High Definition Audio Controller Registers Chapter 17 provides a detailed description of all registers that reside in the Intel(R) High Definition Audio controller. This controller resides at Device 27, Function 0 (D27:F0). Chapter 18. SMBus Controller Registers Chapter 18 provides a detailed description of all registers that reside in the SMBus controller. This controller resides at Device 31, Function 3 (D31:F3). Chapter 19. PCI Express* Port Controller Registers Chapter 19 provides a detailed description of all registers that reside in the PCI Express controller. This controller resides at Device 28, Functions 0 to 5 (D28:F0-F7). Chapter 20. High Precision Event Timers Registers Chapter 20 provides a detailed description of all registers that reside in the multimedia timer memory mapped register space. Chapter 21. Serial Peripheral Interface Registers Chapter 21 provides a detailed description of all registers that reside in the SPI memory mapped register space. Chapter 22. Thermal Sensors Chapter 22 provides a detailed description of all registers that reside in the thermal sensors PCI configuration space. The registers reside at Device 31, Function 6 (D31:F6). Chapter 23. Intel(R) Management Engine (Intel(R) ME) Chapter 23 provides a detailed description of all registers that reside in the Intel ME controller. The registers reside at Device 22, Function 0 (D22:F0). 46 Datasheet Introduction 1.2 Overview The PCH provides extensive I/O support. Functions and capabilities include: * PCI Express* Base Specification, Revision 2.0 support for up to eight ports * PCI Local Bus Specification, Revision 2.3 support for 33 MHz PCI operations (supports up to four Req/Gnt pairs) * ACPI Power Management Logic Support, Revision 3.0b * Enhanced DMA controller, interrupt controller, and timer functions * Integrated Serial ATA host controllers with independent DMA operation on up to six ports * USB host interface with support for up to fourteen USB ports; two EHCI high-speed USB 2.0 Host controllers and 2 rate matching hubs * Integrated 10/100/1000 Gigabit Ethernet MAC with System Defense * System Management Bus (SMBus) Specification, Version 2.0 with additional support for I2C devices * Supports Intel(R) High Definition Audio * Supports Intel(R) Rapid Storage Technology * Supports Intel(R) Active Management Technology * Supports Intel(R) Virtualization Technology for Directed I/O * Supports Intel(R) Trusted Execution Technology * Supports Intel(R) Flexible Display Interconnect (Intel(R) FDI) * Supports buffered mode generating extra clocks from a clock chip * Analog and Digital Display ports -- Analog CRT -- HDMI -- DVI -- DisplayPort 1.1 -- SDVO -- LVDS (Mobile Only) -- Embedded DisplayPort * * * * * * Low Pin Count (LPC) interface Firmware Hub (FWH) interface support Serial Peripheral Interface (SPI) support Intel(R) Quiet System Technology (Desktop only) Intel(R) Anti-Theft Technology JTAG Boundary Scan support The PCH incorporates a variety of PCI devices and functions, as shown in Table 1-2. They are divided into eight logical devices. The first is the DMI-To-PCI bridge (Device 30). The second device (Device 31) contains most of the standard PCI functions that always existed in the PCI-to-ISA bridges (South Bridges), such as the Intel(R) PIIX4. The third and fourth (Device 29 and Device 26) are the USB host controller devices. The fifth (Device 28) is the PCI Express device. The sixth (Device 27) is the HD Audio controller device, and the seventh (Device 25) is the Gigabit Ethernet controller device. The eighth (Device 22) is the Intel(R) Management Engine Interface Controller. Datasheet 47 Introduction Table 1-2. PCI Devices and Functions Bus:Device:Function Function Description Bus 0:Device 30:Function 0 DMI-to-PCI Bridge Bus 0:Device 31:Function 0 LPC Controller1 Bus 0:Device 31:Function 2 SATA Controller #1 Bus 0:Device 31:Function 5 SATA Controller #23 Bus 0:Device 31:Function 6 Thermal Subsystem Bus 0:Device 31:Function 3 SMBus Controller Bus 0:Device 29:Function 0 USB HS EHCI Controller #1 Bus 0:Device 26:Fucntion 0 USB HS EHCI Controller #2 Bus 0:Device 28:Function 0 PCI Express* Port 1 Bus 0:Device 28:Function 1 PCI Express Port 2 Bus 0:Device 28:Function 2 PCI Express Port 3 Bus 0:Device 28:Function 3 PCI Express Port 4 Bus 0:Device 28:Function 4 PCI Express Port 5 Bus 0:Device 28:Function 5 PCI Express Port 6 Bus 0:Device 28:Function 6 PCI Express Port 7 Bus 0:Device 28:Function 7 PCI Express Port 8 Bus 0:Device 27:Function 0 Intel(R) High Definition Audio Controller Bus 0:Device 25:Function 0 Gigabit Ethernet Controller Bus 0:Device 22:Function 0 Intel(R) Management Engine Interface (Intel(R) MEI) #1 Bus 0:Device 22:Function 1 Intel(R) Management Engine Interface (Intel(R) MEI) #2 Bus 0:Device 22:Function 2 IDE-R Bus 0:Device 22:Function 3 KT NOTES: 1. The PCI-to-LPC bridge contains registers that control LPC, Power Management, System Management, GPIO, Processor Interface, RTC, Interrupts, Timers, and DMA. 2. Device 26:Function 2 may be configured as Device 29:Function 3 during BIOS Post. 3. SATA Controller 2 is only visible when D31:F2 CC.SCC=01h. 48 Datasheet Introduction 1.2.1 Capability Overview The following sub-sections provide an overview of the PCH capabilities. Direct Media Interface (DMI) Direct Media Interface (DMI) is the chip-to-chip connection between the processor and PCH. This high-speed interface integrates advanced priority-based servicing allowing for concurrent traffic and true isochronous transfer capabilities. Base functionality is completely software-transparent, permitting current and legacy software to operate normally. PCI Express* Interface The PCH provides up to 8 PCI Express Root Ports, supporting the PCI Express Base Specification, Revision 2.0. Each Root Port supports 2.5 Gb/s bandwidth in each direction (5 Gb/s concurrent). PCI Express Root Ports 1-4 and Ports 5-8 can be independently configured as four x1s, two x2s, one x2 and 2 x1s, or one x4 port widths. Serial ATA (SATA) Controller The PCH has two integrated SATA host controllers that support independent DMA operation on up to six ports and supports data transfer rates of up to 3.0 GB/s (300 MB/s). The SATA controller contains two modes of operation--a legacy mode using I/O space, and an AHCI mode using memory space. Software that uses legacy mode will not have AHCI capabilities. The PCH supports the Serial ATA Specification, Revision 1.0a. The PCH also supports several optional sections of the Serial ATA II: Extensions to Serial ATA 1.0 Specification, Revision 1.0 (AHCI support is required for some elements). AHCI The PCH provides hardware support for Advanced Host Controller Interface (AHCI), a new programming interface for SATA host controllers. Platforms supporting AHCI may take advantage of performance features such as no master/slave designation for SATA devices--each device is treated as a master--and hardware-assisted native command queuing. AHCI also provides usability enhancements such as Hot-Plug. AHCI requires appropriate software support (such as an AHCI driver) and for some features, hardware support in the SATA device or additional platform hardware. See Section 1.3 for details on SKU feature availability. Intel(R) Rapid Storage Technology The PCH provides support for Intel(R) Rapid Storage Technology, providing both AHCI (see above for details on AHCI) and integrated RAID functionality. The industry-leading RAID capability provides high-performance RAID 0, 1, 5, and 10 functionality on up to 6 SATA ports of the PCH. Matrix RAID support is provided to allow multiple RAID levels to be combined on a single set of hard drives, such as RAID 0 and RAID 1 on two disks. Other RAID features include hot spare support, SMART alerting, and RAID 0 auto replace. Software components include an Option ROM for pre-boot configuration and boot functionality, a Microsoft Windows* compatible driver, and a user interface for configuration and management of the RAID capability of the PCH. See Section 1.3 for details on SKU feature availability. Datasheet 49 Introduction PCI Interface The PCH PCI interface provides a 33 MHz, Revision 2.3 implementation. The PCH integrates a PCI arbiter that supports up to four external PCI bus masters in addition to the internal PCH requests. This allows for combinations of up to four PCI down devices and PCI slots. Low Pin Count (LPC) Interface The PCH implements an LPC Interface as described in the LPC 1.1 Specification. The Low Pin Count (LPC) bridge function of the PCH resides in PCI Device 31:Function 0. In addition to the LPC bridge interface function, D31:F0 contains other functional units including DMA, interrupt controllers, timers, power management, system management, GPIO, and RTC. Serial Peripheral Interface (SPI) The PCH implements an SPI Interface as an alternative interface for the BIOS flash device. An SPI flash device can be used as a replacement for the FWH, and is required to support Gigabit Ethernet, Intel(R) Active Management Technology and integrated Intel(R) Quiet System Technology. The PCH supports up to two SPI flash devices with speeds of up to 50 MHz using two chip select pins. Compatibility Modules (DMA Controller, Timer/Counters, Interrupt Controller) The DMA controller incorporates the logic of two 8237 DMA controllers, with seven independently programmable channels. Channels 0-3 are hardwired to 8-bit, count-bybyte transfers, and channels 5-7 are hardwired to 16-bit, count-by-word transfers. Any two of the seven DMA channels can be programmed to support fast Type-F transfers. Channel 4 is reserved as a generic bus master request. The PCH supports LPC DMA, which is similar to ISA DMA, through the PCH's DMA controller. LPC DMA is handled through the use of the LDRQ# lines from peripherals and special encoding on LAD[3:0] from the host. Single, Demand, Verify, and Increment modes are supported on the LPC interface. The timer/counter block contains three counters that are equivalent in function to those found in one 8254 programmable interval timer. These three counters are combined to provide the system timer function, and speaker tone. The 14.31818 MHz oscillator input provides the clock source for these three counters. The PCH provides an ISA-Compatible Programmable Interrupt Controller (PIC) that incorporates the functionality of two 8259 interrupt controllers. The two interrupt controllers are cascaded so that 14 external and two internal interrupts are possible. In addition, the PCH supports a serial interrupt scheme. All of the registers in these modules can be read and restored. This is required to save and restore system state after power has been removed and restored to the platform. Advanced Programmable Interrupt Controller (APIC) In addition to the standard ISA compatible Programmable Interrupt controller (PIC) described in the previous section, the PCH incorporates the Advanced Programmable Interrupt Controller (APIC). 50 Datasheet Introduction Universal Serial Bus (USB) Controllers The PCH contains up to two Enhanced Host Controller Interface (EHCI) host controllers that support USB high-speed signaling. High-speed USB 2.0 allows data transfers up to 480 Mb/s. The PCH also contains two Rate Matching Hubs (RMH) that support USB fullspeed and low-speed signaling. The PCH supports up to fourteen USB 2.0 ports. All fourteen ports are high-speed, fullspeed, and low-speed capable. Gigabit Ethernet Controller The Gigabit Ethernet Controller provides a system interface using a PCI function. The controller provides a full memory-mapped or IO mapped interface along with a 64 bit address master support for systems using more than 4 GB of physical memory and DMA (Direct Memory Addressing) mechanisms for high performance data transfers. Its bus master capabilities enable the component to process high-level commands and perform multiple operations; this lowers processor utilization by off-loading communication tasks from the processor. Two large configurable transmit and receive FIFOs (up to 20 KB each) help prevent data underruns and overruns while waiting for bus accesses. This enables the integrated LAN controller to transmit data with minimum interframe spacing (IFS). The LAN controller can operate at multiple speeds (10/100/1000 MB/s) and in either full duplex or half duplex mode. In full duplex mode the LAN controller adheres with the IEEE 802.3x Flow Control Specification. Half duplex performance is enhanced by a proprietary collision reduction mechanism. See Section 5.3 for details. RTC The PCH contains a Motorola* MC146818B-compatible real-time clock with 256 bytes of battery-backed RAM. The real-time clock performs two key functions: keeping track of the time of day and storing system data, even when the system is powered down. The RTC operates on a 32.768 KHz crystal and a 3 V battery. The RTC also supports two lockable memory ranges. By setting bits in the configuration space, two 8-byte ranges can be locked to read and write accesses. This prevents unauthorized reading of passwords or other system security information. The RTC also supports a date alarm that allows for scheduling a wake up event up to 30 days in advance, rather than just 24 hours in advance. GPIO Various general purpose inputs and outputs are provided for custom system design. The number of inputs and outputs varies depending on the PCH's configuration. Enhanced Power Management The PCH power management functions include enhanced clock control and various lowpower (suspend) states (such as, Suspend-to-RAM and Suspend-to-Disk). A hardwarebased thermal management circuit permits software-independent entrance to lowpower states. The the PCH contains full support for the Advanced Configuration and Power Interface (ACPI) Specification, Revision 3.0a. Datasheet 51 Introduction Intel(R) Active Management Technology (Intel(R) AMT) (Not available on all the Intel(R) 5 Series Chipset or Intel(R) 3400 Series Chipset SKUs) Intel AMT is a fundamental component of Intel(R) vProTM technology. Intel AMT is a set of advanced manageability features developed as a direct result of IT customer feedback gained through Intel market research. With the advent of powerful tools like the Intel(R) System Defense Utility, the extensive feature set of Intel AMT easily integrates into any network environment. See Section 1.3 for details on SKU feature availability. Manageability In addition to Intel(R) AMT, the PCH integrates several functions designed to manage the system and lower the total cost of ownership (TCO) of the system. These system management functions are designed to report errors, diagnose the system, and recover from system lockups without the aid of an external microcontroller. * TCO Timer. The PCH's integrated programmable TCO timer is used to detect system locks. The first expiration of the timer generates an SMI# that the system can use to recover from a software lock. The second expiration of the timer causes a system reset to recover from a hardware lock. * Processor Present Indicator. The PCH looks for the processor to fetch the first instruction after reset. If the processor does not fetch the first instruction, the PCH will reboot the system. * ECC Error Reporting. When detecting an ECC error, the host controller has the ability to send one of several messages to the PCH. The host controller can instruct the PCH to generate either an SMI#, NMI, SERR#, or TCO interrupt. * Function Disable. The PCH provides the ability to disable the following integrated functions: LAN, USB, LPC, Intel(R) HD Audio, SATA, PCI Express or SMBus. Once disabled, these functions no longer decode I/O, memory, or PCI configuration space. Also, no interrupts or power management events are generated from the disabled functions. * Intruder Detect. The PCH provides an input signal (INTRUDER#) that can be attached to a switch that is activated by the system case being opened. The PCH can be programmed to generate an SMI# or TCO interrupt due to an active INTRUDER# signal. System Management Bus (SMBus 2.0) The PCH contains an SMBus Host interface that allows the processor to communicate with SMBus slaves. This interface is compatible with most I2C devices. Special I2C commands are implemented. The PCH's SMBus host controller provides a mechanism for the processor to initiate communications with SMBus peripherals (slaves). Also, the PCH supports slave functionality, including the Host Notify protocol. Hence, the host controller supports eight command protocols of the SMBus interface (see System Management Bus (SMBus) Specification, Version 2.0): Quick Command, Send Byte, Receive Byte, Write Byte/Word, Read Byte/Word, Process Call, Block Read/Write, and Host Notify. The PCH SMBus also implements hardware-based Packet Error Checking for data robustness and the Address Resolution Protocol (ARP) to dynamically provide address to all SMBus devices. 52 Datasheet Introduction Intel(R) High Definition Audio Controller The Intel(R) High Definition Audio Specification defines a digital interface that can be used to attach different types of codecs, such as audio and modem codecs. The PCH's Intel(R) HD Audio controller supports up to 4 codecs. The link can operate at either 3.3 V or 1.5 V. With the support of multi-channel audio stream, 32-bit sample depth, and sample rate up to 192 kHz, the Intel(R) HD Audio controller provides audio quality that can deliver CE levels of audio experience. On the input side, the PCH adds support for an array of microphones. Intel(R) Quiet System Technology (Intel(R) QST) The PCH integrates four fan speed sensors (four TACH signals) and four fan speed controllers (three Pulse Width Modulator signals), which enables monitoring and controlling up to four fans on the system. With the new implementation of the singlewire Simple Serial Transport (SST) 1.0 bus and Platform Environmental Control Interface (PECI), the PCH provides an easy way to connect to SST-based thermal sensors and access the processor thermal data. In addition, coupled with the new sophisticated fan speed control algorithms, Intel(R) QST provides effective thermal and acoustic management for the platform. Note: Intel(R) Quiet System Technology functionality requires a correctly configured system, including an appropriate processor, Intel(R) Management Engine firmware, and system BIOS support. Intel(R) Anti-Theft Technology (Not available on all the Intel(R) 5 Series Chipset or Intel(R) 3400 Series Chipset SKUs) The PCH introduces a new hardware-based security technology which encrypts data stored on any SATA compliant HDD in AHCI Mode. This feature gives the end-user the ability to restrict access to HDD data by unknown parties. Intel(R) Anti-Theft Technology can be used alone or can be combined with software encryption applications to add protection against data theft. Intel(R) Anti-Theft Technology functionality requires a correctly configured system, including an appropriate processor, Intel(R) Management Engine firmware, and system BIOS support. Intel(R) Virtualization Technology for Directed I/O (Intel(R) VT-d) The PCH provides hardware support for implementation of Intel(R) Virtualization Technology with Directed I/O (Intel(R) VT-d). Intel(R) VT-d Technology consists of technology components that support the virtualization of platforms based on Intel(R) Architecture Processors. Intel(R) VT-d Technology enables multiple operating systems and applications to run in independent partitions. A partition behaves like a virtual machine (VM) and provides isolation and protection across partitions. Each partition is allocated its own subset of host physical memory. Datasheet 53 Introduction JTAG Boundary-Scan The PCH adds the industry standard JTAG interface and enables Boundary-Scan in place of the XOR chains used in previous generations. Boundary-Scan can be used to ensure device connectivity during the board manufacturing process. The JTAG interface allows system manufacturers to improve efficiency by using industry available tools to test the PCH on an assembled board. Since JTAG is a serial interface, it eliminates the need to create probe points for every pin in an XOR chain. This eases pin breakout and trace routing and simplifies the interface between the system and a bed-of-nails tester. Note: Contact your local Intel Field Sales Representative for additional information about JTAG usage on the PCH. Serial Over Lan (SOL) Function This function supports redirection of keyboard and text screens to a terminal window on a remote console. The keyboard and text redirection enables the control of the client machine through the network without the need to be physically near that machine. Text and keyboard redirection allows the remote machine to control and configure a client system. The SOL function emulates a standard PCI device and redirects the data from the serial port to the management console using the integrated LAN. KVM KVM provides enhanced capabilities to its predecessor - SOL. In addition to the features set provided by SOL, KVM provides mouse and graphic redirection across the integrated LAN. Unlike SOL, KVM does not appear as a host accessible PCI device but is instead almost completely performed by Intel AMT Firmware with minimal BIOS interaction as described in the Intel ME BIOS Writer's Guide. The KVM feature is only available with internal graphics. IDE-R Function The IDE-R function is an IDE Redirection interface that provides client connection to management console ATA/ATAPI devices such as hard disk drives and optical disk drives. A remote machine can setup a diagnostic SW or OS installation image and direct the client to boot an IDE-R session. The IDE-R interface is the same as the IDE interface although the device is not physically connected to the system and supports the ATA/ATAPI-6 specification. IDE-R does not conflict with any other type of boot and can instead be implemented as a boot device option. The Intel AMT solution will use IDE-R when remote boot is required. The device attached through IDE-R is only visible to software during a management boot session. During normal boot session, the IDE-R controller does not appear as a PCI present device. PCH Display Interface The PCH integrates latest display technologies such as HDMI*, DisplayPort*, Embedded DisplayPort (eDP*), SDVO, and DVI along with legacy display technologies: Analog Port (VGA) and LVDS (mobile only). The Analog Port and LVDS Port are dedicated ports on the PCH and the Digital Ports B, C and D can be configured to drive HDMI, DVI, or DisplayPort. Digital Port B can also be configured as SDVO while Digital Port D can be configured as eDP. The HDMI interface supports the HDMI* 1.3C specification while the DisplayPort interface supports the DisplayPort* 1.1a specification. The PCH supports High-bandwidth Digital Content Protection for high definition content playback over digital interfaces. The PCH also integrates audio codecs for audio support over HDMI and DisplayPort interfaces. The PCH receives the display data over the Intel(R) FDI and transcodes the data as per the display technology protocol and sends the data through the display interface. 54 Datasheet Introduction Intel(R) Flexible Display Interconnect (FDI) The Intel(R) FDI connects the display engine in the processor with the display interfaces on the PCH. The display data from the frame buffer is processed by the display engine and sent to the PCH where it is transcoded and driven out on the panel. Intel FDI involves two channels - A and B for display data transfer. Intel FDI Channel A has 4 lanes and Channel B supports 4 lanes depending on the display configuration. Each of the Intel FDI Channel lanes uses differential signal supporting 2.7 Gb/s. For two display configurations Intel FDI CH A maps to display pipe A while Intel CH B maps to the second display pipe B. 1.3 Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset SKU Definition Table 1-3. Intel(R) 5 Series Chipset Desktop SKUs Feature Set PCI Express* 2.0 Ports USB* 2.0 Ports SATA Ports SKU Name(s) Q57 H57 H55 P55 B55 8 8 65 8 65 14 14 124 14 124 6 6 6 6 6 HDMI/DVI/VGA/SDVO/DisplayPort/eDP Yes Yes Yes No Yes LVDS No No No No No Integrated Graphics Support with PAVP 1.5 Yes Yes Yes No Yes Intel(R) Quiet System Technology Intel(R) Rapid Storage Technology Yes Yes Yes No Yes AHCI Yes Yes Yes Yes Yes Raid 0/1/5/10 Support Yes Yes No Yes No Intel(R) ME Ignition FW only No No No Yes No Intel(R) AT Yes No No No No Intel(R) AMT 6.0 Yes No No No No Intel(R) Remote PC Assist Technology for Business Yes No No No No Intel(R) Remote PC Assist Technology for Consumer No Yes Yes No No Intel(R) Remote Wake Technology No Yes Yes No No NOTES: 1. Contact your local Intel Field Sales Representative for currently available PCH SKUs. 2. Table above shows feature difference between the PCH skus. If a feature is not listed in the table it is considered a Base feature that is included in all SKUs. 3. The PCH provides hardware support for AHCI functionality when enabled by appropriate system configurations and software drivers. 4. USB ports 6 and 7 are disabled. 5. PCIe* ports 7 and 8 are disabled. Datasheet 55 Introduction Table 1-4. Intel(R) 5 Series Chipset Mobile SKUs Feature Set SKU Name(s) QM57 HM57 PM55 HM55 8 8 8 65 8 14 14 14 124 14 6 6 6 46 6 HDMI/DVI/VGA/SDVO/DisplayPort/eDP Yes Yes No Yes Yes LVDS Yes Yes No Yes Yes Graphics Support with PAVP 1.5 Yes Yes No Yes Yes Intel(R) No No No No No AHCI Yes Yes Yes Yes Yes Raid 0/1/5/10 Support Yes Yes Yes No Yes PCI Express* 2.0 Ports USB* 2.0 Ports SATA Ports Quiet System Technology Intel(R) Rapid Storage Technology QS57 Intel(R) ME Ignition FW only No No Yes No No Intel(R) AT Yes Yes No Yes Yes Intel(R) Active Managment Technology (Intel AMT) 6.0 Yes No No No Yes Intel(R) Remote PC Assist Technology for Business Yes No No No Yes Intel(R) Remote PC Assist Technology for Consumer No Yes No No No Intel(R) Remote Wake Technology No No No No No NOTES: 1. Contact your local Intel Field Sales Representative for currently available PCH SKUs. 2. Table above shows feature difference between the PCH SKUs. If a feature is not listed in the table it is considered a Base feature that is included in all skus. 3. The PCH provides hardware support for AHCI functionality when enabled by appropriate system configurations and software drivers. 4. USB ports 6 and 7 are disabled. 5. PCIe* ports 7 and 8 are disabled. 6. SATA ports 2 and 3 are disabled. 56 Datasheet Introduction Table 1-5. Intel(R) 3400 Series Chipset Server SKUs SKU Name(s) Feature Set Intel(R) 3400 Chipset Intel(R) 3450 Chipset PCI Express* 2.0 Ports 67 8 8 USB* 2.0 Ports 85 124 14 SATA Ports 46 6 6 HDMI/DVI/VGA/SDVO/DisplayPort No No Yes LVDS No No No Graphics Support with PAVP 1.5 No No Yes Intel(R) Quiet System Technology No No Yes Intel(R) AHCI No3 Yes Yes Raid 0/1/5/10 Support No Yes Yes Intel(R) ME Ignition FW only Yes Yes No Intel(R) AT No No Yes Intel(R) AMT 6.0 No No Yes Intel(R) Remote PC Assist Technology for Business No No Yes Intel(R) Remote PC Assist Technology for Consumer No No No No No Yes Rapid Storage Technology Intel(R) Remote Wake Technology 1. 2. 3. 4. 5. 6. 7. 1.4 Intel(R) 3420 Chipset Contact your local Intel Field Sales Representative for currently available PCH skus. Table above shows feature difference between the PCH skus. If a feature is not listed in the table it is considered a Base feature that is included in all skus. The PCH provides hardware support for AHCI functionality when enabled by appropriate system configurations and software drivers. USB ports 6 and 7 are disabled. USB ports 8, 9, 10, 11, 12 and 13 are disabled. SATA ports 2 and 3 are disabled. PCIe* ports 7 and 8 are disabled. Reference Documents Document Number / Location Document Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update http://download.intel.com/ design/processor/ specupdt/322166.pdf Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Thermal Mechanical Specifications and Design Guidelines www.intel.com/Assets/ PDF/designguide/ 322171.pdf Datasheet 57 Introduction 58 Datasheet Signal Description 2 Signal Description This chapter provides a detailed description of each signal. The signals are arranged in functional groups according to their associated interface. The "#" symbol at the end of the signal name indicates that the active, or asserted state occurs when the signal is at a low voltage level. When "#" is not present, the signal is asserted when at the high voltage level. The "" symbol at the end of the signal name indicates that the signal is mobile only. The following notations are used to describe the signal type: I Input Pin O Output Pin OD O Open Drain Output Pin. I/OD Bi-directional Input/Open Drain Output Pin. I/O Bi-directional Input / Output Pin. CMOS CMOS buffers. 1.5 V tolerant. COD CMOS Open Drain buffers. 3.3 V tolerant. HVCMOS High Voltage CMOS buffers. 3.3 V tolerant. A Analog reference or output. The "Type" for each signal is indicative of the functional operating mode of the signal. Unless otherwise noted in Section 3.2 or Section 3.3, a signal is considered to be in the functional operating mode after RTCRST# de-asserts for signals in the RTC well, after RSMRST# de-asserts for signals in the suspend well, after PWROK asserts for signals in the core well, and after LAN_RST# de-asserts for signals in the LAN well. Datasheet 59 Signal Description Figure 2-1. PCH Interface Signals Block Diagram AD[31:0] C/BE[3:0]# DEVSEL# FRAME# IRDY# TRDY# STOP# PAR PERR# REQ0# REQ1#/GPIO50 REQ2#/GPIO52 REQ3#/GPIO54 GNT0# GNT1#/GPIO51 GNT2#/GPIO53 GNT3#/GPIO55 SERR# PME# CLKIN_PCILOOPBACK PCIRST# PLOCK# INIT3_3V# RCIN# A20GATE PROCPWRGD SPI_CS0#; SPI_CS1# SPI_MISO SPI_MOSI SPI_CLK PCI Express* Interface PCI Interface Serial ATA Interface Processor Interface SPI CLOCKOUT_BCLK0_[P:N]/CLKOUT_PCIE8_[P:N} CLKOUT_DP_[P:N]/CLKOUT_BCLK1_[P:N] Power Mgnt. CLKIN_DMI_P;CLKIN_DMI_N XTAL25_OUT CLKOUT_PEG_A_[P:N];CLKOUT_PEG_B_[P:N] CLKOUT_PCIE[7:0]_P; CLKOUT_PCIE[7:0]_N Clock Outputs CLKOUT_PCI[4:0] CLKOUTFLEX0/GPIO64;CLKOUTFLEX1/GPIO65 CLKOUTFLEX2/GPIO66;CLKOUTFLEX3/GPIO67 CLKIN_BCLK_P;CLKIN_BCLK_N CLKIN_DMI_P;CLKIN_DMI_N CLKIN_SATA_[P:N]/CKSSCD_[P:N] CLKIN_DOT96P;CLKIN_DOT96N XTAL25_IN REF14CLKIN PCIECLKRQ0#/GPIO73;PCIECLKRQ1#/GPIO18 PCIECLKRQ2#/GPIO20;PCIECLKRQ3#/GPIO25 PCIECLKRQ4#/GPIO26;PCIECLKRQ5#/GPIO44 PCIECLKRQ6#/GPIO45;PCIECLKRQ7#/GPIO46 TBD Clock Inputs PEG_A_CLKRQ#/GPIO47;PEG_B_CLKRQ#/GPIO56 XCLK_RCOMP SERIRQ PIRQ[D:A]# PIRQ[H:E]#/GPIO[5:2] USB[13:0]P; USB[13:0]N OC0#/GPIO59; OC1#/GPIO40 OC2#/GPIO41; OC3#/GPIO42 OC4#/GPIO43; OC5#/GPIO9 OC6#/GPIO10; OC7#/GPIO14 USBRBIAS USBRBIAS# RTCX1 RTCX2 INTVRMEN SPKR SRTCRST# RTCRST# GPIO[72,57,35,32,28, 27,15,8,0] PWM[3:0]/TP[12:9] TACH0/GPIO17; TACH1/GPIO1 TACH2/GPIO6; TACH3/GPIO7 SST PECI JTAGTCK JTAGTMS JTAGTDI JTAGTDO CL_CLK1 CL_DATA1 CL_RST1# 60 Interrupt Interface USB RTC Misc. Signals General Purpose I/O Fan Speed Control JTAG* Controller Link PETp[8:1], PETn[8:1] PERp[8:1], PERn[8:1] SATA[5:0]TXP, SATA[5:0]TXN SATA[5:0]RXP, SATA[5:0]RXN SATAICOMPO SATAICOMPI SATALED# SATA0GP/GPIO21 SATA1GP/GPIO19 SATA2GP/GPIO36 SATA3GP/GPIO37 SATA4GP/GPIO16 SATA5GP/GPIO49/TEMP_ALERT# SCLOCK/GPIO22 SLOAD/GPIO38 SDATAOUT0/GPIO39 SDATAOUT1/GPIO48 THRMTRIP# SYS_RESET# RSMRST# SLP_S3# SLP_S4# SLP_S5#/GPIO63 SLP_M# CLKRUN#/GPIO32 PWROK MEPWROK PWRBTN# RI# WAKE# SUS_STAT#/GPIO61 SUSCLK/GPIO62 LAN_RST# BATLOW#/GPIO72 PLTRST# STP_PCI#/GPIO34 ACPRESENT /GPIO31 DRAMPWROK LAN_PHY_PWR_CTRL SLP_LAN#/GPIO29 PMSYNCH (R) Intel High Definition Audio HDA_RST# HDA_SYNC HDA_BCLK HDA_SDO HDA_SDIN[3:0] HDA_DOCK_EN#;HDA_DOCK_RST# Direct Media Interface DMI[3:0]TXP, DMI[3:0]TXN DMI[3:0]RXP, DMI[3:0]RXN DMI_ZCOMP DMI_IRCOMP LPC / FWH Interface LAD[3:0]/FWH[3:0] LFRAME#/FWH4 LDRQ0#; LDRQ1#/GPIO23 SMBus Interface System Mgnt. Analog Display LVDS Digital Display Interface SMBDATA; SMBCLK SMBALERT#/GPIO11 INTRUDER#; SML[0:1]DATA;SML[0:1]CLK; SML0ALERT#/GPIO60 SML1ALERT#/GPIO74 CRT_RED;CRT_GREEN;CRT_BLUE DAC_IREF CRT_HSYNC;CRT_VSYNC CRT_DDC_CLK;CRT_DDC_DATA CRT_IRTN LVDS[A:B]_DATA[3:0] LVDS[A:B]_DATA#[3:0] LVDS[A:B]_CLK:LVDS[A:B]_CLK# LVD_VREFH ;LVD_VREFL;LFV_VBG LVD_IBG L_DDC_CLK;L_DDC_DATA L_VDDEN;L_BLKTEN ;L_BKLTCTL DDPB_[3:0]P;DDPB_[3:0]N; DDPC_[3:0]P;DDPC_[3:0]N; DDPD_[3:0]P;DDPD_[3:0]N; DDP[B:D]_AUXP;DDP[B:D]_AUXN; DDP[B:D]_HPD SDVO_CTRLCLK;SDVO_CTRLDATA DDPC_CTRLCLK;DDPC_CTRLDATA DDPD_CTRLCLK;DDPD_CTRLDATA SDVO_INTP;SDVO_INTN SDVO_TVCLKINP;SDVO_TVCLKINN SDVO_STALLP;SDVO_STALLN Datasheet Signal Description 2.1 Direct Media Interface (DMI) to Host Controller Table 2-1. Direct Media Interface Signals Name Type Description DMI0TXP, DMI0TXN O Direct Media Interface Differential Transmit Pair 0 DMI0RXP, DMI0RXN I Direct Media Interface Differential Receive Pair 0 DMI1TXP, DMI1TXN O Direct Media Interface Differential Transmit Pair 1 DMI1RXP, DMI1RXN I Direct Media Interface Differential Receive Pair 1 DMI2TXP, DMI2TXN O Direct Media Interface Differential Transmit Pair 2 DMI2RXP, DMI2RXN I Direct Media Interface Differential Receive Pair 2 DMI3TXP, DMI3TXN O Direct Media Interface Differential Transmit Pair 3 DMI3RXP, DMI3RXN I Direct Media Interface Differential Receive Pair 3 DMI_ZCOMP I Impedance Compensation Input: Determines DMI input impedance. DMI_IRCOMP O Impedance/Current Compensation Output: Determines DMI output impedance and bias current. 2.2 PCI Express* Table 2-2. PCI Express* Signals Name Datasheet Type Description PETp1, PETn1 O PCI Express* Differential Transmit Pair 1 PERp1, PERn1 I PCI Express Differential Receive Pair 1 PETp2, PETn2 O PCI Express Differential Transmit Pair 2 PERp2, PERn2 I PCI Express Differential Receive Pair 2 PETp3, PETn3 O PCI Express Differential Transmit Pair 3 PERp3, PERn3 I PCI Express Differential Receive Pair 3 PETp4, PETn4 O PCI Express Differential Transmit Pair 4 PERp4, PERn4 I PCI Express Differential Receive Pair 4 PETp5, PETn5 O PCI Express Differential Transmit Pair 5 PERp5, PERn5 I PCI Express Differential Receive Pair 5 PETp6, PETn6 O PCI Express Differential Transmit Pair 6 PERp6, PERn6 I PCI Express Differential Receive Pair 6 PETp7, PETn7 O PCI Express Differential Transmit Pair 7 NOTE: Port 7 may not be available in all PCH SKUs. Please see Chapter 1.3 for more information. 61 Signal Description Table 2-2. PCI Express* Signals Name Type Description PERp7, PERn7 I PCI Express Differential Receive Pair 7 NOTE: Port 7 may not be available in all PCH SKUs. Please see Chapter 1.3 for more information. PETp8, PETn8 O PCI Express Differential Transmit Pair 8 NOTE: Port 8 may not be available in all PCH SKUs. Please see Chapter 1.3 for more information. PERp8, PERn8 I PCI Express Differential Receive Pair 8 NOTE: Port 8 may not be available in all PCH SKUs. Please see Chapter 1.3 for more information. 2.3 Firmware Hub Interface Table 2-3. Firmware Hub Interface Signals 62 Name Type Description FWH[3:0] / LAD[3:0] I/O FWH4 / LFRAME# O Firmware Hub Signals. This signal is multiplexed with the LPC LFRAME# signal. INIT3_3V# O Initialization 3.3 V: INIT3_3V# is asserted by the PCH for 16 PCI clocks to reset the processor. This signal is intended for Firmware Hub. Firmware Hub Signals. These signals are multiplexed with the LPC address signals. Datasheet Signal Description 2.4 PCI Interface Table 2-4. PCI Interface Signals (Sheet 1 of 3) Name AD[31:0] Type I/O Description PCI Address/Data: AD[31:0] is a multiplexed address and data bus. During the first clock of a transaction, AD[31:0] contain a physical address (32 bits). During subsequent clocks, AD[31:0] contain data. The PCH will drive all 0s on AD[31:0] during the address phase of all PCI Special Cycles. Bus Command and Byte Enables: The command and byte enable signals are multiplexed on the same PCI pins. During the address phase of a transaction, C/BE[3:0]# define the bus command. During the data phase C/BE[3:0]# define the Byte Enables. C/BE[3:0]# C/BE[3:0]# I/O Command Type 0000b Interrupt Acknowledge 0001b Special Cycle 0010b I/O Read 0011b I/O Write 0110b Memory Read 0111b Memory Write 1010b Configuration Read 1011b Configuration Write 1100b Memory Read Multiple 1110b Memory Read Line 1111b Memory Write and Invalidate All command encodings not shown are reserved. The PCH does not decode reserved values, and therefore will not respond if a PCI master generates a cycle using one of the reserved values. DEVSEL# FRAME# IRDY# Datasheet I/O Device Select: The PCH asserts DEVSEL# to claim a PCI transaction. As an output, the PCH asserts DEVSEL# when a PCI master peripheral attempts an access to an internal PCH address or an address destined for DMI (main memory or graphics). As an input, DEVSEL# indicates the response to a PCH-initiated transaction on the PCI bus. DEVSEL# is tri-stated from the leading edge of PLTRST#. DEVSEL# remains tri-stated by the PCH until driven by a target device. I/O Cycle Frame: The current initiator drives FRAME# to indicate the beginning and duration of a PCI transaction. While the initiator asserts FRAME#, data transfers continue. When the initiator negates FRAME#, the transaction is in the final data phase. FRAME# is an input to the PCH when the PCH is the target, and FRAME# is an output from the PCH when the PCH is the initiator. FRAME# remains tri-stated by the PCH until driven by an initiator. I/O Initiator Ready: IRDY# indicates the PCH ability, as an initiator, to complete the current data phase of the transaction. It is used in conjunction with TRDY#. A data phase is completed on any clock both IRDY# and TRDY# are sampled asserted. During a write, IRDY# indicates the PCH has valid data present on AD[31:0]. During a read, it indicates the PCH is prepared to latch data. IRDY# is an input to the PCH when the PCH is the target and an output from the PCH when the PCH is an initiator. IRDY# remains tri-stated by the PCH until driven by an initiator. 63 Signal Description Table 2-4. PCI Interface Signals (Sheet 2 of 3) Name TRDY# STOP# PAR PERR# Type Description I/O Target Ready: TRDY# indicates the PCH ability, as a target, to complete the current data phase of the transaction. TRDY# is used in conjunction with IRDY#. A data phase is completed when both TRDY# and IRDY# are sampled asserted. During a read, TRDY# indicates that the PCH, as a target, has placed valid data on AD[31:0]. During a write, TRDY# indicates the PCH, as a target is prepared to latch data. TRDY# is an input to the PCH when the PCH is the initiator and an output from the PCH when the PCH is a target. TRDY# is tri-stated from the leading edge of PLTRST#. TRDY# remains tri-stated by the PCH until driven by a target. I/O Stop: STOP# indicates that the PCH, as a target, is requesting the initiator to stop the current transaction. STOP# causes the PCH, as an initiator, to stop the current transaction. STOP# is an output when the PCH is a target and an input when the PCH is an initiator. I/O Calculated/Checked Parity: PAR uses "even" parity calculated on 36 bits, AD[31:0] plus C/BE[3:0]#. "Even" parity means that the PCH counts the number of ones within the 36 bits plus PAR and the sum is always even. The PCH always calculates PAR on 36 bits regardless of the valid byte enables. The PCH generates PAR for address and data phases and only ensures PAR to be valid one PCI clock after the corresponding address or data phase. The PCH drives and tri-states PAR identically to the AD[31:0] lines except that the PCH delays PAR by exactly one PCI clock. PAR is an output during the address phase (delayed one clock) for all PCH initiated transactions. PAR is an output during the data phase (delayed one clock) when the PCH is the initiator of a PCI write transaction, and when it is the target of a read transaction. The PCH checks parity when it is the target of a PCI write transaction. If a parity error is detected, the PCH will set the appropriate internal status bits, and has the option to generate an NMI# or SMI#. I/O Parity Error: An external PCI device drives PERR# when it receives data that has a parity error. The PCH drives PERR# when it detects a parity error. The PCH can either generate an NMI# or SMI# upon detecting a parity error (either detected internally or reported using the PERR# signal). REQ0# REQ1#/ GPIO50 REQ2#/ GPIO52 I PCI Requests: The PCH supports up to 4 masters on the PCI bus. REQ[3:1]# pins can instead be used as GPIO. REQ3#/GPIO54 PCI Grants: The PCH supports up to 4 masters on the PCI bus. GNT[3:1]# pins can instead be used as GPIO. GNT0# GNT1#/ GPIO51 GNT2#/ GPIO53 O GNT3#/GPIO55 CLKIN_PCILOO PBACK 64 Pull-up resistors are not required on these signals. If pull-ups are used, they should be tied to the Vcc3_3 power rail. NOTE: GNT[3:0]# are sampled as a functional strap. See Section 2.28.1 for details. I PCI Clock: This is a 33 MHz clock feedback input to reduce skew between PCH PCI clock and clock observed by connected PCI devices. This signal must be connected to one of the pins in the group CLKOUT_PCI[4:0] Datasheet Signal Description Table 2-4. PCI Interface Signals (Sheet 3 of 3) Name Type Description O PCI Reset: This is the Secondary PCI Bus reset signal. It is a logical OR of the primary interface PLTRST# signal and the state of the Secondary Bus Reset bit of the Bridge Control register (D30:F0:3Eh, bit 6). PLOCK# I/O PCI Lock: This signal indicates an exclusive bus operation and may require multiple transactions to complete. The PCH asserts PLOCK# when it performs non-exclusive transactions on the PCI bus. PLOCK# is ignored when PCI masters are granted the bus. SERR# I/OD System Error: SERR# can be pulsed active by any PCI device that detects a system error condition. Upon sampling SERR# active, the PCH has the ability to generate an NMI, SMI#, or interrupt. I/OD PCI Power Management Event: PCI peripherals drive PME# to wake the system from low-power states S1-S5. PME# assertion can also be enabled to generate an SCI from the S0 state. In some cases the PCH may drive PME# active due to an internal wake event. The PCH will not drive PME# high, but it will be pulled up to VccSus3_3 by an internal pull-up resistor. PCIRST# PME# 2.5 Serial ATA Interface Table 2-5. Serial ATA Interface Signals (Sheet 1 of 3) Name SATA0TXP SATA0TXN SATA0RXP SATA0RXN SATA1TXP SATA1TXN SATA1RXP SATA1RXN Type O I O I -- SATA2TXP SATA2TXN Description Serial ATA 0 Differential Transmit Pairs: These are outbound high-speed differential signals to Port 0. In compatible mode, SATA Port 0 is the primary master of SATA Controller 1. Serial ATA 0 Differential Receive Pair: These are inbound highspeed differential signals from Port 0. In compatible mode, SATA Port 0 is the primary master of SATA Controller 1. Serial ATA 1 Differential Transmit Pair: These are outbound high-speed differential signals to Port 1. In compatible mode, SATA Port 1 is the secondary master of SATA Controller 1. Serial ATA 1 Differential Receive Pair: These are inbound highspeed differential signals from Port 1. In compatible mode, SATA Port 1 is the secondary master of SATA Controller 1. Serial ATA 2 Differential Transmit Pair: These are outbound high-speed differential signals to Port 2. O In compatible mode, SATA Port 2 is the primary slave of SATA Controller 1. NOTE: SATA Port 2 may not be available in all PCH SKUs. Datasheet 65 Signal Description Table 2-5. Serial ATA Interface Signals (Sheet 2 of 3) Name Type Description Serial ATA 2 Differential Receive Pair: These are inbound highspeed differential signals from Port 2. SATA2RXP SATA2RXN I In compatible mode, SATA Port 2 is the primary slave of SATA Controller 1. NOTE: SATA Port 2 may not be available in all PCH SKUs. Serial ATA 3 Differential Transmit Pair: These are outbound high-speed differential signals to Port 3 SATA3TXP SATA3TXN O In compatible mode, SATA Port 3 is the secondary slave of SATA Controller 1. NOTE: SATA Port 3 may not be available in all PCH SKUs. Serial ATA 3 Differential Receive Pair: These are inbound highspeed differential signals from Port 3 SATA3RXP SATA3RXN I In compatible mode, SATA Port 3 is the secondary slave of SATA Controller 1. NOTE: SATA Port 3 may not be available in all PCH SKUs. SATA4TXP SATA4TXN SATA4RXP SATA4RXN SATA5TXP SATA5TXN SATA5RXP SATA5RXN O I O I Serial ATA 4 Differential Transmit Pair: These are outbound high-speed differential signals to Port 4. In compatible mode, SATA Port 4 is the primary master of SATA Controller 2. Serial ATA 4 Differential Receive Pair: These are inbound highspeed differential signals from Port 4. In compatible mode, SATA Port 4 is the primary master of SATA Controller 2. Serial ATA 5 Differential Transmit Pair: These are outbound high-speed differential signals to Port 5. In compatible mode, SATA Port 5 is the secondary master of SATA Controller 2. Serial ATA 5 Differential Receive Pair: These are inbound highspeed differential signals from Port 5. In compatible mode, SATA Port 5 is the secondary master of SATA Controller 2. SATAICOMPO O Serial ATA Compensation Output: Connected to the external precision resistor to VccCore. Must be connected to SATAICOMPI on the board. SATAICOMPI I Serial ATA Compensation Input: Connected to SATAICOMPO on the board. SATA0GP / GPIO21 I Serial ATA 0 General Purpose: This is an input pin which can be configured as an interlock switch corresponding to SATA Port 0. When used as an interlock switch status indication, this signal should be driven to `0' to indicate that the switch is closed and to `1' to indicate that the switch is open. This signal can instead be used as GPIO21. SATA1GP / GPIO19 I Serial ATA 1 General Purpose: This is an input pin which can be configured as an interlock switch corresponding to SATA Port 1. When used as an interlock switch status indication, this signal should be driven to `0' to indicate that the switch is closed and to `1' to indicate that the switch is open. This signal can instead be used as GPIO19. 66 Datasheet Signal Description Table 2-5. Serial ATA Interface Signals (Sheet 3 of 3) Name SATA2GP / GPIO36 Type I Description Serial ATA 2 General Purpose: This is an input pin which can be configured as an interlock switch corresponding to SATA Port 2. When used as an interlock switch status indication, this signal should be driven to `0' to indicate that the switch is closed and to `1' to indicate that the switch is open. This signal can instead be used as GPIO36. SATA3GP / GPIO37 I Serial ATA 3 General Purpose: This is an input pin which can be configured as an interlock switch corresponding to SATA Port 3. When used as an interlock switch status indication, this signal should be driven to `0' to indicate that the switch is closed and to `1' to indicate that the switch is open. This signal can instead be used as GPIO37. SATA4GP / GPIO16 I Serial ATA 4 General Purpose: This is an input pin which can be configured as an interlock switch corresponding to SATA Port 4. When used as an interlock switch status indication, this signal should be driven to `0' to indicate that the switch is closed and to `1' to indicate that the switch is open. This signal can instead be used as GPIO16. SATA5GP / GPIO49 / TEMP_ALERT# I Serial ATA 5 General Purpose: This is an input pin which can be configured as an interlock switch corresponding to SATA Port 5. When used as an interlock switch status indication, this signal should be driven to `0' to indicate that the switch is closed and to `1' to indicate that the switch is open. This signal can instead be used as GPIO49. SATALED# SCLOCK/ GPIO22 OD O OD O Serial ATA LED: This signal is an open-drain output pin driven during SATA command activity. It is to be connected to external circuitry that can provide the current to drive a platform LED. When active, the LED is on. When tri-stated, the LED is off. An external pull-up resistor to Vcc3_3 is required. SGPIO Reference Clock: The SATA controller uses rising edges of this clock to transmit serial data, and the target uses the falling edge of this clock to latch data. The SCLOCK frequency supported is 32 kHz. This signal can instead be used as a GPIO22. SLOAD/GPIO38 OD O SGPIO Load: The controller drives a `1' at the rising edge of SCLOCK to indicate either the start or end of a bit stream. A 4-bit vendor specific pattern will be transmitted right after the signal assertion. This signal can instead be used as a GPIO38. SDATAOUT0/ GPIO39 SDATAOUT1/ GPIO48 Datasheet OD O SGPIO Dataout: Driven by the controller to indicate the drive status in the following sequence: drive 0, 1, 2, 3, 4, 5, 0, 1, 2... These signals can instead be used as GPIOs. 67 Signal Description 2.6 LPC Interface Table 2-6. LPC Interface Signals Name Type Description LAD[3:0] / FWH[3:0] I/O LPC Multiplexed Command, Address, Data: For LAD[3:0], internal pullups are provided. LFRAME# / FWH4 O LPC Frame: LFRAME# indicates the start of an LPC cycle, or an abort. LPC Serial DMA/Master Request Inputs: LDRQ[1:0]# are used to request DMA or bus master access. These signals are typically connected to an external Super I/O device. An internal pull-up resistor is provided on these signal. LDRQ0#, LDRQ1# / GPIO23 I This signal can instead be used as GPIO23. 2.7 Interrupt Interface Table 2-7. Interrupt Signals Name Type SERIRQ I/OD PIRQ[D:A]# PIRQ[H:E]# / GPIO[5:2] I/OD Description Serial Interrupt Request: This pin implements the serial interrupt protocol. PCI Interrupt Requests: In non-APIC mode the PIRQx# signals can be routed to interrupts 3, 4, 5, 6, 7, 9, 10, 11, 12, 14 or 15 as described in Section 5.8.6. Each PIRQx# line has a separate Route Control register. In APIC mode, these signals are connected to the internal I/O APIC in the following fashion: PIRQA# is connected to IRQ16, PIRQB# to IRQ17, PIRQC# to IRQ18, and PIRQD# to IRQ19. This frees the legacy interrupts. PCI Interrupt Requests: In non-APIC mode the PIRQx# signals can be routed to interrupts 3, 4, 5, 6, 7, 9, 10, 11, 12, 14 or 15 as described in Section 5.8.6. Each PIRQx# line has a separate Route Control register. I/OD In APIC mode, these signals are connected to the internal I/O APIC in the following fashion: PIRQE# is connected to IRQ20, PIRQF# to IRQ21, PIRQG# to IRQ22, and PIRQH# to IRQ23. This frees the legacy interrupts. These signals can instead be used as GPIOs. NOTE: PIRQ Interrupts can only be shared if it is configured as level sensitive. They cannot be shared if configured as edge triggered. 68 Datasheet Signal Description 2.8 USB Interface Table 2-8. USB Interface Signals (Sheet 1 of 2) Name Type Description Universal Serial Bus Port [1:0] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 0. USBP0P, USBP0N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [1:0] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 1. USBP1P, USBP1N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [3:2] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 2. USBP2P, USBP2N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [3:2] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 3. USBP3P, USBP3N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [5:4] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 4. USBP4P, USBP4N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [5:4] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 5. USBP5P, USBP5N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [7:6] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 6. USBP6P, USBP6N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [7:6] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 7. USBP7P, USBP7N Datasheet I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. 69 Signal Description Table 2-8. USB Interface Signals (Sheet 2 of 2) Name Type Description Universal Serial Bus Port [9:8] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 8. USBP8P, USBP8N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [9:8] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 9. USBP9P, USBP9N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [11:10] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 10. USBP10P, USBP10N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [11:10] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 11. USBP11P, USBP11N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [13:12] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 12. USBP12P, USBP12N I/O NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. Universal Serial Bus Port [13:12] Differential: These differential pairs are used to transmit Data/Address/Command signals for port 13. USBP13P, USBP13N I/O Overcurrent Indicators: These signals set corresponding bits in the USB controllers to indicate that an overcurrent condition has occurred. OC0# / GPIO59 OC1# / GPIO40 These signals can instead be used as GPIOs. OC2# / GPIO41 OC3# / GPIO42 OC4# / GPIO43 I OC5# / GPIO9 OC6# / GPIO10 OC7# / GPIO14 70 NOTE: No external resistors are required on these signals. The PCH integrates 15 k pull-downs and provides an output driver impedance of 45 which requires no external series resistor. NOTES: 1. OC# pins are not 5 V tolerant. 2. Depending on platform configuration, sharing of OC# pins may be required. 3. OC#[3:0] can only be used for EHCI controller #1 4. OC#[4:7] can only be used for EHCI controller #2 USBRBIAS O USB Resistor Bias: Analog connection point for an external resistor. Used to set transmit currents and internal load resistors. USBRBIAS# I USB Resistor Bias Complement: Analog connection point for an external resistor. Used to set transmit currents and internal load resistors. Datasheet Signal Description 2.9 Power Management Interface Table 2-9. Power Management Interface Signals (Sheet 1 of 3) Name PLTRST# Type O Description Platform Reset: The PCH asserts PLTRST# to reset devices on the platform (such as, SIO, FWH, LAN, processor, etc.). The PCH asserts PLTRST# during power-up and when software initiates a hard reset sequence through the Reset Control register (I/O Register CF9h). The PCH drives PLTRST# inactive a minimum of 1 ms after both PWROK and SYS_PWROK are driven high. The PCH drives PLTRST# active a minimum of 1 ms when initiated through the Reset Control register (I/O Register CF9h). NOTE: PLTRST# is in the VccSus3_3 well. THRMTRIP# I Thermal Trip: When low, this signal indicates that a thermal trip from the processor occurred, and the PCH will immediately transition to a S5 state. The PCH will not wait for the processor stop grant cycle since the processor has overheated. SLP_S3# O S3 Sleep Control: SLP_S3# is for power plane control. This signal shuts off power to all non-critical systems when in S3 (Suspend To RAM), S4 (Suspend to Disk), or S5 (Soft Off) states. S4 Sleep Control: SLP_S4# is for power plane control. This signal shuts power to all non-critical systems when in the S4 (Suspend to Disk) or S5 (Soft Off) state. SLP_S4# O NOTE: This pin must be used to control the DRAM power to use the PCH's DRAM power-cycling feature. See Chapter 5.13.10.2 for details SLP_S5# / GPIO63 O S5 Sleep Control: SLP_S5# is for power plane control. This signal is used to shut power off to all non-critical systems when in the S5 (Soft Off) states. This signal can instead be used as GPIO63 SLP_M# SLP_LAN# / GPIO29 O Manageability Sleep State Control: SLP_M# is for power plane control. If no Management Engine firmware is present, SLP_M# will have the same timings as SLP_S3#. LAN Sub-System Sleep Control: When SLP_LAN# is deasserted it indicates that the PHY device must be powered. When SLP_LAN# is asserted, power can be shut off to the PHY device. SLP_LAN# will always be deasserted in S0 and anytime SLP_A# is deasserted. O A SLP_LAN#/GPIO Select Soft-Strap can be used for systems NOT using SLP_LAN# functionality to revert to GPIO29 usage. When softstrap is 0 (default), pin function will be SLP_LAN#. When soft-strap is set to 1, the pin returns to its regular GPIO mode. The pin behavior is summarized in Section 5.13.10.5. Power OK: When asserted, PWROK is an indication to the PCH that all of its core power rails are powered and stable. PWROK can be driven asynchronously. When PWROK is negated, the PCH asserts PLTRST#. PWROK Datasheet I NOTE: It is required that the power rails associated with PCI/PCIe typically the 3.3 V, 5 V, and 12 V core well rails) have been valid for 99 ms prior to PCH PWROK assertion to comply with the 100 ms PCI 2.3/PCIe 2.0 specification on PLTRST# deassertion. PWROK must not glitch, even if RSMRST# is low. 71 Signal Description Table 2-9. Power Management Interface Signals (Sheet 2 of 3) Name Type MEPWROK I Management Engine Power OK: When asserted, this signal indicates that power to the ME subsystem is stable. PWRBTN# I Power Button: The Power Button will cause SMI# or SCI to indicate a system request to go to a sleep state. If the system is already in a sleep state, this signal will cause a wake event. If PWRBTN# is pressed for more than 4 seconds, this will cause an unconditional transition (power button override) to the S5 state. Override will occur even if the system is in the S1-S4 states. This signal has an internal pull-up resistor and has an internal 16 ms de-bounce on the input. RI# I Ring Indicate: This signal is an input from a modem. It can be enabled as a wake event, and this is preserved across power failures. SYS_RESET# I System Reset: This pin forces an internal reset after being debounced. The PCH will reset immediately if the SMBus is idle; otherwise, it will wait up to 25 ms 2 ms for the SMBus to idle before forcing a reset on the system. I Resume Well Reset: This signal is used for resetting the resume power plane logic. This signal must be asserted for at least 10 ms after the suspend power wells are valid. When de-asserted, this signal is an indication that the suspend power wells are stable. RSMRST# LAN_RST# I Description LAN Reset: When asserted, the internal LAN controller is in reset. This signal must remain asserted until at least 1 ms after the LAN power well (VccLAN) and ME power well (VccME3_3) are valid. Also, LAN_RST# must assert a minimum of 40 ns before the LAN power rails become inactive. When de-asserted, this signal is an indication that LAN power wells are stable. NOTES: 1. If Intel LAN is enabled, LAN_RST# must be connected to the same source as MEPWROK. 2. If Intel LAN is not used or disabled, LAN_RST# must be grounded through an external pull-down resistor. LAN_PHY_PW R_CTRL / GPIO12 LAN PHY Power Control: LAN_PHY_PWR_CTRL should be connected to LAN_DISABLE_N on the Intel 82567 GbE PHY. The PCH will drive LAN_PHY_PWR_CTRL low to put the PHY into a low power state when functionality is not needed. O NOTES: LAN_PHY_PWR_CTRL can only be driven low if SLP_LAN# is deasserted. This signal can instead be used as GPIO12. WAKE# SUS_STAT# / GPIO61 I O PCI Express* Wake Event: Sideband wake signal on PCI Express asserted by components requesting wake up. Suspend Status: This signal is asserted by the PCH to indicate that the system will be entering a low power state soon. This can be monitored by devices with memory that need to switch from normal refresh to suspend refresh mode. It can also be used by other peripherals as an indication that they should isolate their outputs that may be going to powered-off planes. This signal can instead be used as GPIO61. SUSCLK / GPIO62 72 O Suspend Clock: This clock is an output of the RTC generator circuit to use by other chips for refresh clock. This signal can instead be used as GPIO62. Datasheet Signal Description Table 2-9. Power Management Interface Signals (Sheet 3 of 3) Name Type Description DRAMPWROK O DRAM Power OK: This signal should connect to the Processor's SM_DRAMPWROK pin. The PCH asserts this pin to indicate when DRAM power is on. NOTE: 1. This pin should have External pull-up to the an always on Voltage level of 1.05 V / 1.1 V PMSYNCH O Power Management Sync: Provides state information from the PCH to the processor relevant to C-state transitions. CLKRUN# (Mobile Only) / GPIO32 (Desktop Only) I/O Mobile: Can be configured as CLKRUN# Desktop: GPIO mode only. BATLOW# (Mobile Only) / GPIO72 I Battery Low: Mobile only signal is an input from the battery to indicate that there is insufficient power to boot the system. Assertion will prevent wake from S3-S5 state. This signal can also be enabled to cause an SMI# when asserted. Mobile: Can be configured as BATLOW# (Desktop Only) Datasheet PCI Clock Run: Mobile only signal used to support PCI CLKRUN protocol. Connects to peripherals that need to request clock restart or prevention of clock stopping. Desktop: GPIO mode only. NOTE: Desktop requires a weak external pull-up SYS_PWROK I STP_PCI# / GPIO34 O System Power OK: This generic power good input to the PCH is driven and used in a platform-specific manner. While PWROK always indicates that the CORE well of the PCH is stable, SYS_PWROK is used to inform the PCH that power is stable to some other system component(s) and the system is ready to start the exit from reset. The particular component(s) associated with SYS_PWROK can vary across platform types supported by the same generation of the PCH. Depending on the platform, the PCH may expect (and wait) for SYS_PWROK at different stages of the boot flow before continuing. Stop PCI Clock: This signal is an output to the external clock generator for it to turn off the PCI clock. This signal can instead be used as GPIO34. 73 Signal Description 2.10 Processor Interface Table 2-10. Processor Interface Signals Name RCIN# Type I Description Keyboard Controller Reset Processor: The keyboard controller can generate INIT# to the processor. This saves the external OR gate with the PCH's other sources of INIT#. When the PCH detects the assertion of this signal, INIT# is generated for 16 PCI clocks. NOTE: The PCH will ignore RCIN# assertion during transitions to the S1, S3, S4, and S5 states. 2.11 A20GATE I A20 Gate: A20GATE is from the keyboard controller. The signal acts as an alternative method to force the A20M# signal active. It saves the external OR gate needed with various other chipsets. PROCPWRGD O Processor Power Good: This signal should be connected to the processor's VCCPWRGOOD_1 and VCCPWRGOOD_0 input to indicate when the processor power is valid. SMBus Interface Table 2-11. SM Bus Interface Signals 74 Name Type Description SMBDATA I/OD SMBus Data: External pull-up resistor is required. SMBCLK I/OD SMBus Clock: External pull-up resistor is required. SMBALERT# / GPIO11 I SMBus Alert: This signal is used to wake the system or generate SMI#. This signal can instead be used as GPIO11. Datasheet Signal Description 2.12 System Management Interface Table 2-12. System Management Interface Signals 2.13 Name Type Description INTRUDER# I Intruder Detect: This signal can be set to disable system if box detected open. This signal's status is readable, so it can be used like a GPI if the Intruder Detection is not needed. SML0DATA I/OD System Management Link 0 Data: SMBus link to external PHY. External pull-up is required. SML0CLK I/OD System Management Link 0 Clock: SMBus link to external PHY. External pull-up is required. SML0ALERT# / GPIO60 / O OD SML1ALERT# / GPIO74 O OD SML1CLK / GPIO58 I/OD SML1DATA / GPIO75 I/OD SMLink Alert 0: Output of the integrated LAN controller to external PHY. External pull-up resistor is required. This signal can instead be used as GPIO60. SMLink Alert 1: Alert for the Intel ME SMBus controller to optional Embedded Controller or BMC. External pull-up resistor is required. This signal can instead be used as GPIO74. System Management Link 1 Clock: SMBus link to optional Embedded Controller or BMC. External pull-up resistor is required. This signal can instead be used as GPIO58. System Management Link 1 Data: SMBus link to optional Embedded Controller or BMC. External pull-up resistor is required. This signal can instead be used as GPIO75. Real Time Clock Interface Table 2-13. Real Time Clock Interface Datasheet Name Type Description RTCX1 Special Crystal Input 1: This signal is connected to the 32.768 kHz crystal. If no external crystal is used, then RTCX1 can be driven with the desired clock rate. RTCX2 Special Crystal Input 2: This signal is connected to the 32.768 kHz crystal. If no external crystal is used, then RTCX2 should be left floating. 75 Signal Description 2.14 Miscellaneous Signals Table 2-14. Miscellaneous Signals Name Type INTVRMEN I Description Internal Voltage Regulator Enable: This signal enables the internal 1.05 V regulators. This signal must be always pulled-up to VccRTC. SPKR O Speaker: The SPKR signal is the output of counter 2 and is internally "ANDed" with Port 61h bit 1 to provide Speaker Data Enable. This signal drives an external speaker driver device, which in turn drives the system speaker. Upon PLTRST#, its output state is 0. NOTE: SPKR is sampled as a functional strap. See Section 2.28.1 for more details. There is a weak integrated pull-down resistor on SPKR pin. RTC Reset: When asserted, this signal resets register bits in the RTC well. RTCRST# I NOTES: 1. Unless CMOS is being cleared (only to be done in the G3 power state), the RTCRST# input must always be high when all other RTC power planes are on. 2. In the case where the RTC battery is dead or missing on the platform, the RTCRST# pin must rise before the RSMRST# pin. Secondary RTC Reset: This signal resets the manageability register bits in the RTC well when the RTC battery is removed. SRTCRST# 76 I NOTES: 1. The SRTCRST# input must always be high when all other RTC power planes are on. 2. In the case where the RTC battery is dead or missing on the platform, the SRTCRST# pin must rise before the RSMRST# pin. Datasheet Signal Description 2.15 Intel(R) High Definition Audio Link Table 2-15. Intel(R) High Definition Audio Link Signals Name HDA_RST# Type O Description Intel(R) High Definition Audio Reset: Master hardware reset to external codec(s). Intel(R) High Definition Audio Sync: 48 kHz fixed rate sample sync to the codec(s). Also used to encode the stream number. HDA_SYNC HDA_BCLK O O NOTE: This signal is sampled as a functional strap. See Section 2.28.1 for more details. There is a weak integrated pull-down resistor on this pin. Intel(R) High Definition Audio Bit Clock Output: 24.000 MHz serial data clock generated by the Intel(R) High Definition Audio controller (the PCH). This signal has a weak internal pull-down resistor. Intel(R) High Definition Audio Serial Data Out: Serial TDM data output to the codec(s). This serial output is double-pumped for a bit rate of 48 Mb/s for Intel(R) High Definition Audio. HDA_SDO O NOTE: This signal is sampled as a functional strap. See Section 2.28.1 for more details. There is a weak integrated pull-down resistor on this pin. HDA_SDIN[3:0] I Intel(R) High Definition Audio Serial Data In [3:0]: Serial TDM data inputs from the codecs. The serial input is singlepumped for a bit rate of 24 Mb/s for Intel(R) High Definition Audio. These signals have integrated pull-down resistors, which are always enabled. NOTE: During enumeration, the PCH will drive this signal. During normal operation, the CODEC will drive it. HDA_DOCK_EN# (Mobile Only) / GPIO33 O High Definition Audio Dock Enable: This mobile signal controls the external Intel(R) HD Audio docking isolation logic. This is an active low signal. When de-asserted the external docking switch is in isolate mode. When asserted the external docking switch electrically connects the Intel(R) HD Audio dock signals to the corresponding PCH signals. Mobile: Can be configured as HDA_DOCK_EN# Desktop: GPIO mode only. NOTE: This signal is sampled as a functional strap. See Section 2.28.1 for more details. HDA_DOCK_RST# / GPIO13 O Intel High Definition Audio Dock Reset: This signal is a dedicated HDA_RST# signal for the codec(s) in the docking station. Aside from operating independently from the normal HDA_RST# signal, it otherwise works similarly to the HDA_RST# signal. This signal is shared with GPIO13. This signal defaults to GPIO13 mode after PLTRST#. BIOS is responsible for configuring GPIO13 to HDA_DOCK_RST# mode. Datasheet 77 Signal Description 2.16 Controller Link Table 2-16. Controller Link Signals Signal Name Type Description CL_RST1# / TP20 O Controller Link Reset 1: Controller Link reset that connects to a Wireless LAN Device supporting Intel(R) Active Management Technology. I/O Controller Link Clock 1: Bi-directional clock that connects to a Wireless LAN Device supporting Intel(R) Active Management Technology. I/O Controller Link Data 1: Bi-directional data that connects to a Wireless LAN Device supporting Intel(R) Active Management Technology. (Desktop Only) CL_CLK1 / TP18 (Desktop Only) CL_DATA1 / TP19 (Desktop Only) 2.17 Serial Peripheral Interface (SPI) Table 2-17. Serial Peripheral Interface (SPI) Signals Name Type Description SPI_CS0# O SPI Chip Select 0: Used as the SPI bus request signal. SPI_CS1# O SPI Chip Select 1: Used as the SPI bus request signal. SPI_MISO I SPI Master IN Slave OUT: Data input pin for the PCH. SPI Master OUT Slave IN: Data output pin for the PCH. 78 SPI_MOSI O SPI_CLK O NOTE: This signal is sampled as a functional strap. See Section 2.28.1 for more details. There is a weak integrated pull-down resistor on this pin. SPI Clock: SPI clock signal, during idle the bus owner will drive the clock signal low. 17.86 MHz and 31.25 MHz. Datasheet Signal Description 2.18 Intel(R) Quiet System Technology and Thermal Reporting Table 2-18. Intel(R) Quiet System Technology Signals Signal Name PWM[3:0] (Desktop Only) / TP[12:9] (Mobile Only) Type Description Fan Pulse Width Modulation Outputs: Pulse Width Modulated duty cycle output signal that is used for Intel(R) Quiet System Technology. OD O When controlling a 3-wire fan, this signal controls a power transistor that, in turn, controls power to the fan. When controlling a 4-wire fan, this signal is connected to the "Control" signal on the fan. The polarity of this signal is programmable. The output default is low. These signals are 5 V tolerant. TACH0 (Desktop Only) / GPIO17 TACH1 (Desktop Only) / GPIO1 TACH2 I Fan Tachometer Inputs: Tachometer pulse input signal that is used to measure fan speed. This signal is connected to the "Sense" signal on the fan. These signals can instead be used as a GPIOs. (Desktop Only) / GPIO6 TACH3 (Desktop Only) / GPIO7 Datasheet SST I/O Simple Serial Transport: Single-wire, serial bus. Connect to SST compliant devices such as SST thermal sensors or voltage sensors. PECI I/O Platform Environment Control Interface: Single-wire, serial bus. Connect to corresponding pin of the processor for accessing processor digital thermometer. 79 Signal Description 2.19 JTAG Signals Table 2-19. JTAG Signals Name Type Description JTAG_TCK I Test Clock Input (TCK): The test clock input provides the clock for the JTAG test logic. JTAG_TMS I Test Mode Select (TMS): The signal is decoded by the Test Access Port (TAP) controller to control test operations. JTAG_TDI I Test Data Input (TDI): Serial test instructions and data are received by the test logic at TDI. JTAG_TDO OD Test Data Output (TDO): TDO is the serial output for test instructions and data from the test logic defined in this standard. Test Reset (RST): RST is an active low asynchronous signal that can reset the Test Access Port (TAP) controller. TRST# I NOTE: The RST signal is optional per the IEEE 1149.1 specification, and is not functional for Boundary Scan Testing. NOTE: JTAG Pin definitions are from IEEE Standard Test Access Port and Boundary-Scan Architecture (IEEE Std. 1149.1-2001). 2.20 Clock Signals Table 2-20. Clock Interface Signals (Sheet 1 of 3) Name CLKIN_BCLK_P, CLKIN_BCLK_N CLKOUT_BCLK0_P / CLKOUT_PCIE8_P, CLKOUT_BCLK0_N / CLKOUT_PCIE8_N CLKOUT_DP_P / CLKOUT_BCLK1_P, CLKOUT_DP_N / CLKOUT_BCLK1_N Type Description I 133 MHz differential reference clock from a clock chip in Buffer-Through Mode. O 133 MHz Differential output to Processor or 100 MHz PCIe* Gen 1.1 specification differential output to PCI Express devices. O 120 MHz Differential output for DisplayPort reference or 133 MHz Differential output to processor 100 MHz differential reference clock from a clock chip in Buffer-Through Mode. CLKIN_DMI_P, CLKIN_DMI_N I CLKOUT_DMI_P, CLKOUT_DMI_N O 100 MHz Gen2 specification jitter tolerant differential output to processor. I 100 MHz differential reference clock from a clock chip, provided separately from CLKIN_DMI, for use only as a 100 MHz source for SATA. I 96 MHz differential reference clock from a clock chip. CLKIN_SATA_P / CKSSCD_P, CLKIN_SATA_N / CKSSCD_N CLKIN_DOT96P, CLKIN_DOT96N 80 NOTE: This input clock is required to be PCIe 2.0 jitter spec compliant from a clock chip, for PCIe 2.0 discrete Graphics platforms. Datasheet Signal Description Table 2-20. Clock Interface Signals (Sheet 2 of 3) Name Type XTAL25_IN I Connection for 25 MHz crystal to the PCH oscillator circuit. XTAL25_OUT O Connection for 25 MHz crystal to the PCH oscillator circuit. REFCLK14IN I Single-ended 14.31818 MHz reference clock driven by a clock chip. CLKOUT_PEG_A_P, CLKOUT_PEG_A_N O 100 MHz Gen2 specification differential output to PCIExpress Graphics device CLKOUT_PEG_B_P, CLKOUT_PEG_B_N O 100 MHz Gen2 specification differential output to a second PCI-Express Graphics device PEG_A_CLKRQ# / GPIO47, PEG_B_CLKRQ# / GPIO56 CLKOUT_PCIE[7:0]P, CLKOUT_PCIE[7:0]N PCIECLKRQ0# / GPIO73, PCIECLKRQ1# / GPIO18, PCIECLKRQ2# / GPIO20, PCIECLKRQ3# / GPIO25, PCIECLKRQ4# / GPIO26, PCIECLKRQ5# / GPIO44, PCIECLKRQ6# / GPIO45, PCIECLKRQ7# / GPIO46 CLKOUT_PCI[4:0] I O Description Clock Request Signals for PEG SLOTS These signals can instead be used as GPIOs 100 MHz PCIe* Gen1.1 specification differential output to PCI Express* devices Clock Request Signals for PCI Express 100 MHz Clocks These signals can instead be used as GPIOs I NOTE: External Pull-up Resistor required if used for CLKREQ# functionality O Single Ended 33.3 MHz outputs to PCI connectors/ devices. One of these signals must be connected to CLKIN_PCILOOPBACK to function as a PCI clock loopback. This allows skew control for variable lengths of CLKOUT_PCI[4:0]. Configurable as a GPIO or as an Intel(R) Management Firmware programmable output clock, which can be configured as one of the following: * 33 MHz CLKOUTFLEX0 / GPIO64 O * 14.31818 MHz * DC Output logic `0' (Default) NOTE: Default clock setting requires no Intel ME FW configuration. Configurable as a GPIO or as an Intel(R) Management Firmware programmable output clock, which can be configured as one of the following: Non functional and unsupported clock output value (Default) CLKOUTFLEX1 / GPIO65 O * 33 MHz * 14.31818 MHz output to SIO * DC Output logic `0' NOTE: Default clock setting requires no Intel ME FW configuration. Datasheet 81 Signal Description Table 2-20. Clock Interface Signals (Sheet 3 of 3) Name Type Description Configurable as a GPIO or as an Intel(R) Management Firmware programmable output clock which can be configured as one of the following: * 33 MHz CLKOUTFLEX2 / GPIO66 O * 14.31818 MHz (Default) * DC Output logic `0' NOTE: Default clock setting requires no Intel ME FW configuration. Configurable as a GPIO or as an Intel(R) Management Firmware programmable output clock which can be configured as one of the following: * 48 MHz (Default) CLKOUTFLEX3 / GPIO67 * 33 MHz O * 14.31818 MHz output to SIO * DC Output logic `0' NOTE: Default clock setting requires no Intel ME FW configuration. XCLK_RCOMP 2.21 I/O Differential clock buffer Impedance Compensation: Connected to an external precision resistor (90.9 ohms 1%) to VccIO. LVDS Signals (Mobile only) Table 2-21. LVDS Interface Signals (Sheet 1 of 2) Name Type Description LVDSA_DATA[3:0] O LVDS Channel A differential data output - positive LVDSA_DATA#[3:0] O LVDS Channel A differential data output - negative LVDSA_CLK O LVDS Channel A differential clock output - positive LVDSA_CLK# O LVDS Channel A differential clock output - negative LVDSB_DATA[3:0] O LVDS Channel B differential data output - positive LVDSB_DATA#[3:0] O LVDS Channel B differential data output - negative LVDSB_CLK O LVDS Channel B differential clock output - positive LVDSB_CLK# O LVDS Channel B differential clock output - negative L_DDC_CLK I/O EDID support for flat panel display L_DDC_DATA I/O EDID support for flat panel display L_CTRL_CLK I/O Control signal (clock) for external SSC clock chip control - optional L_CTRL_DATA I/O Control signal (data) for external SSC clock chip control - optional LVDS Panel Power Enable: L_VDD_EN O Panel power control enable control for LVDS. This signal is also called VDD_DBL in the CPIS specification and is used to control the VDC source to the panel logic. 82 Datasheet Signal Description Table 2-21. LVDS Interface Signals (Sheet 2 of 2) Name Type Description LVDS Backlight Enable: L_BKLTEN O Panel backlight enable control for LVDS. This signal is also called ENA_BL in the CPIS specification and is used to gate power into the backlight circuitry. Panel Backlight Brightness Control: 2.22 Panel brightness control for LVDS. L_BKLTCTL O LVDS_VREFH O Test mode voltage reference. LVDS_VREFL O Test mode voltage reference. LVD_IBG I LVDS reference current. LVD_VBG O Test mode voltage reference. This signal is also called VARY_BL in the CPIS specification and is used as the PWM Clock input signal. Analog Display /CRT DAC Signals Table 2-22. Analog Display Interface Signals Name CRT_RED CRT_GREEN CRT_BLUE DAC_IREF CRT_HSYNC CRT_VSYNC CRT_DDC_CLK CRT_DDC_DATA CRT_IRTN Datasheet Type O A O A O A I/O A O HVCMOS O HVCMOS I/O COD I/O COD I/O COD Description RED Analog Video Output: This signal is a CRT Analog video output from the internal color palette DAC. GREEN Analog Video Output: This signal is a CRT Analog video output from the internal color palette DAC. BLUE Analog Video Output: This signal is a CRT Analog video output from the internal color palette DAC. Resistor Set: Set point resistor for the internal color palette DAC. A 1 KOhm 1% resistor is required between DAC_IREF and motherboard ground. CRT Horizontal Synchronization: This signal is used as the horizontal sync (polarity is programmable) or "sync interval". 2.5 V output CRT Vertical Synchronization: This signal is used as the vertical sync (polarity is programmable). 2.5V output. Monitor Control Clock Monitor Control Data Monitor Interrupt Return 83 Signal Description 2.23 Intel(R) Flexible Display Interface (FDI) Table 2-23. Intel(R) Flexible Display Interface Signals 2.24 Signal Name Type Description FDI_RXP[3:0] I Display Link 1 positive data in FDI_RXN[3:0] I Display Link 1 negative data in FDI_FSYNC[0] O Display link 1 Frame sync FDI_LSYNC[0] O Display link 1 Line sync FDI_RXP[7:4] I Display Link 2 positive data in FDI_RXN[7:4] I Display Link 2 negative data in FDI_FSYNC[1] O Display link 2 Frame sync FDI_LSYNC[1] O Display link 2 Line sync FDI_INT O Used for Display interrupts from the PCH to processor. Digital Display Signals Table 2-24. Digital Display Interface Signals (Sheet 1 of 3) Name Type Description Port B: Capable of SDVO / HDMI / DVI / DisplayPort SDVO DDPB_[0]P: DDPB_[1]P: DDPB_[2]P: DDPB_[3]P: red green blue clock HDMI / DVI Port B Data and Clock Lines DDPB_[3:0]P O DDPB_[0]P: DDPB_[1]P: DDPB_[2]P: DDPB_[3]P: TMDSB_DATA2 TMDSB_DATA1 TMDSB_DATA0 TMDSB_CLK DisplayPort Port B DDPB_[0]P: DDPB_[1]P: DDPB_[2]P: DDPB_[3]P: 84 Display Display Display Display Port Port Port Port Lane Lane Lane Lane 0 1 2 3 Datasheet Signal Description Table 2-24. Digital Display Interface Signals (Sheet 2 of 3) Name Type Description Port B: Capable of SDVO / HDMI / DVI / DisplayPort SDVO DDPB_[0]N: DDPB_[1]N: DDPB_[2]N: DDPB_[3]N: red complement green complement blue complement clock complement HDMI / DVI Port B Data and Clock Line Complements DDPB_[3:0]N O DDPB_[0]N: DDPB_[1]N: DDPB_[2]N: DDPB_[3]N: TMDSB_DATA2B TMDSB_DATA1B TMDSB_DATA0B TMDSB_CLKB DisplayPort Port B DDPB_[0]N: DDPB_[1]N: DDPB_[2]N: DDPB_[3]N: Display Display Display Display Port Port Port Port Lane Lane Lane Lane 0 1 2 3 complement complement complement complement DDPB_AUXP I/O Port B: Display Port Aux DDPB_AUXN I/O Port B: Display Port Aux Complement DDPB_HPD I Port B: TMDSB_HPD Hot Plug Detect SDVO_CRTLCLK I/O Port B: HDMI Control Clock. Shared with port B SDVO SDVO_CTRLDATA I/O Port B: HDMI Control Data. Shared with port B SDVO SDVO_INTP I SDVO_INTP: Serial Digital Video Input Interrupt SDVO_INTN I SDVO_INTN: Serial Digital Video Input Interrupt Complement. SDVO_TVCLKINP I SDVO_TVCLKINP: Serial Digital Video TVOUT Synchronization Clock. SDVO_TVCLKINN I SDVO_TVCLKINN: Serial Digital Video TVOUT Synchronization Clock Complement. SDVO_STALLP I SDVO_STALLP: Serial Digital Video Field Stall. SDVO_STALLN I SDVO_STALLN: Serial Digital Video Field Stall Complement. Port C: Capable of HDMI / DVI / DP HDMI / DVI Port C Data and Clock Lines DDPC_[3:0]P O DDPC_[0]P: DDPC_[1]P: DDPC_[2]P: DDPC_[3]P: TMDSC_DATA2 TMDSC_DATA1 TMDSC_DATA0 TMDSC_CLK DisplayPort Port C DDPC_[0]P: DDPC_[1]P: DDPC_[2]P: DDPC_[3]P: Datasheet Display Display Display Display Port Port Port Port Lane Lane Lane Lane 0 1 2 3 85 Signal Description Table 2-24. Digital Display Interface Signals (Sheet 3 of 3) Name Type Description Port C: Capable of HDMI / DVI / DisplayPort HDMI / DVI Port C Data and Clock Line Complements DDPC_[3:0]N O DDPC_[0]N: DDPC_[1]N: DDPC_[2]N: DDPC_[3]N: TMDSC_DATA2B TMDSC_DATA1B TMDSC_DATA0B TMDSC_CLKB DisplayPort Port C Complements DDPC_[0]N: DDPC_[1]N: DDPC_[2]N: DDPC_[3]N: Lane Lane Lane Lane 0 1 2 3 complement complement complement complement DDPC_AUXP I/O Port C: Display Port Aux DDPC_AUXN I/O Port C: Display Port Aux Complement DDPC_HPD I Port C: TMDSC_HPD Hot Plug Detect DDPC_CTRLCLK I/O HDMI port C Control Clock DDPC_CTRLDATA I/O HDMI port C Control Data Port D: Capable of HDMI / DVI / DP HDMI / DVI Port D Data and Clock Lines DDPD_[3:0]P O DDPD_[0]P: DDPD_[1]P: DDPD_[2]P: DDPD_[3]P: TMDSC_DATA2 TMDSC_DATA1 TMDSC_DATA0 TMDSC_CLK DisplayPort Port D DDPD_[0]P: DDPD_[1]P: DDPD_[2]P: DDPD_[3]P: Display Display Display Display Port Port Port Port Lane Lane Lane Lane 0 1 2 3 Port D: Capable of HDMI / DVI / DisplayPort HDMI / DVI Port D Data and Clock Line Complements DDPD_[3:0]N O DDPD_[0]N: DDPD_[1]N: DDPD_[2]N: DDPD_[3]N: TMDSC_DATA2B TMDSC_DATA1B TMDSC_DATA0B TMDSC_CLKB DisplayPort Port D Complements DDPD_[0]N: DDPD_[1]N: DDPD_[2]N: DDPD_[3]N: 86 Lane Lane Lane Lane 0 1 2 3 complement complement complement complement DDPD_AUXP I/O Port D: Display Port Aux DDPD_AUXN I/O Port D: Display Port Aux Complement DDPD_HPD I DDPD_CTRLCLK I/O HDMI port D Control Clock Port D: TMDSD_HPD Hot Plug Detect DDPD_CTRLDATA I/O HDMI port D Control Data Datasheet Signal Description 2.25 General Purpose I/O Signals NOTES: 1. GPIO Configuration registers within the Core Well are reset whenever PWROK is deasserted. 2. GPIO Configuration registers within the Suspend Well are reset when RSMRST# is asserted, CF9h reset (06h or 0Eh) event occurs, or SYS_RST# is asserted. 3. GPIO24 is an exception to the other GPIO Signals in the Suspend Well and is not reset by CF9h reset (06h or 0Eh). Table 2-25. General Purpose I/O Signals (Sheet 1 of 3) Name Type Tolerance Power Well Default Blink Capability GPIO75 I/O 3.3 V Suspend Native No Multiplexed with SML1DATA. (Note 10) GPIO74 I/O 3.3 V Suspend Native No Multiplexed with SML1ALERT#. (Note 10) GPIO73 I/O 3.3 V Suspend Native No Multiplexed with PCIECLKRQ0# GPIO72 I/O 3.3 V Suspend Native (Mobile Only) No GPIO67 I/O 3.3 V Core Native No Multiplexed with CLKOUTFLEX3 GPIO66 I/O 3.3 V Core Native No Multiplexed with CLKOUTFLEX2 GPIO65 I/O 3.3 V Core Native No Multiplexed with CLKOUTFLEX1 GPIO64 I/O 3.3 V Core Native No Multiplexed with CLKOUTFLEX0 GPIO63 I/O 3.3 V Suspend Native No Multiplexed with SLP_S5# GPIO62 I/O 3.3 V Suspend Native No Multiplexed with SUSCLK GPIO61 I/O 3.3 V Suspend Native No Multiplexed with SUS_STAT# GPIO60 I/O 3.3 V Suspend Native No Multiplexed with SML0ALERT# GPIO59 I/O 3.3 V Suspend Native No Multiplexed with OC[0]#. (Note 10) Description Mobile: Multiplexed with BATLOW#. Desktop: Unmultiplexed (Note 4) GPIO58 I/O 3.3 V Suspend Native No Multiplexed with SML1CLK GPIO57 I/O 3.3 V Suspend GPI No Unmultiplexed GPIO56 I/O 3.3 V Suspend Native No Multiplexed with PEG_B_CLKRQ# GPIO55 I/O 3.3 V Core Native No Multiplexed with GNT3# GPIO54 I/O 5.0 V Core Native No Multiplexed with REQ3#. (Note 10) GPIO53 I/O 3.3 V Core Native No Multiplexed with GNT2# GPIO52 I/O 5.0 V Core Native No Multiplexed with REQ2#.(Note 10) GPIO51 I/O 3.3 V Core Native No Multiplexed with GNT1# GPIO50 I/O 5.0 V Core Native No Multiplexed with REQ1#.(Note 10) GPIO49 I/O 3.3V Core GPI No Multiplexed with SATA5GP. GPIO48 I/O 3.3 V Core GPI No Multiplexed with SDATAOUT1. GPIO47 I/O 3.3V Suspend Native No Multiplexed with PEG_A_CLKRQ# GPIO46 I/O 3.3V Suspend Native No Multiplexed with PCIECLKRQ7# GPIO45 I/O 3.3V Suspend Native No Multiplexed with PCIECLKRQ6# Datasheet 87 Signal Description Table 2-25. General Purpose I/O Signals (Sheet 2 of 3) Name Type Tolerance Power Well Default Blink Capability GPIO44 I/O 3.3V Suspend Native No Description Multiplexed with PCIECLKRQ5# GPIO[43:40] I/O 3.3 V Suspend Native No Multiplexed with OC[4:1]#. (Note 10) GPIO39 I/O 3.3 V Core GPI No Multiplexed with SDATAOUT0. GPIO38 I/O 3.3 V Core GPI No Multiplexed with SLOAD. GPIO37 I/O 3.3 V Core GPI No Multiplexed with SATA3GP. GPIO36 I/O 3.3 V Core GPI No Multiplexed with SATA2GP. GPIO35 I/O 3.3 V Core GPO No Unmultiplexed. GPIO34 I/O 3.3 V Core GPI No Multiplexed with STP_PCI# GPIO33 I/O 3.3 V Core GPO No Multiplexed with HDA_DOCK_EN# (Mobile Only) (Note 4) No Mobile Only: Used as CLKRUN#, unavailable as GPIO. (Note 4) Yes Multiplexed with ACPRESENT (Note 6) GPIO32 I/O 3.3 V Core GPO, Native (Mobile only) GPIO31 I/O 3.3 V Suspend GPI Desktop Only: Unmultiplexed Multiplexed with SUS_PWR_DN_ACK GPIO30 I/O 3.3 V Suspend GPI Yes Desktop: Cannot be used for native function. Used as GPIO30 only. Mobile: Used as SUS_PWR_DN_ACK or GPIO30 GPIO29 88 I/O 3.3 V Suspend GPI No Multiplexed with SLP_LAN# (Note 9) GPIO28 I/O 3.3 V Suspend GPI Yes Unmultiplexed GPIO27 I/O 3.3 V Suspend GPO Yes Unmultiplexed GPIO26 I/O 3.3 V Suspend Native Yes Multiplexed with PCIECLKRQ4# GPIO25 I/O 3.3 V Suspend Native Yes Multiplexed with PCIECLKRQ3# GPIO24 I/O 3.3 V Suspend GPO Yes Unmultiplexed NOTE: GPIO24 configuration register bits are not cleared by CF9h reset event. GPIO23 I/O 3.3 V Core Native Yes Multiplexed with LDRQ1#. GPIO22 I/O 3.3 V Core GPI Yes Multiplexed with SCLOCK GPIO21 I/O 3.3 V Core GPI Yes Multiplexed with SATA0GP GPIO20 I/O 3.3 V Core Native Yes Multiplexed with PCIECLKRQ2# GPIO19 I/O 3.3 V Core GPI Yes Multiplexed with SATA1GP GPIO18 I/O 3.3 V Core Native Yes (Note 7) GPIO17 I/O 3.3 V Core GPI Yes GPIO16 I/O 3.3 V Core GPI Yes Multiplexed with SATA4GP. GPIO15 I/O 3.3 V Suspend GPO Yes Unmultiplexed GPIO14 I/O 3.3 V Suspend Native Yes Multiplexed with OC7# Multiplexed with PCIECLKRQ1# Multiplexed with TACH0. Mobile: Used as GPIO17 only. Datasheet Signal Description Table 2-25. General Purpose I/O Signals (Sheet 3 of 3) Name Type Tolerance Power Well Default Blink Capability GPIO13 I/O 3.3 V or 1.5 V (Note 11) HDA Suspend GPI Yes Multiplexed with HDA_DOCK_RST# (Mobile Only) (Note 4) GPIO12 I/O 3.3 V Suspend Native Yes Multiplexed with LAN_PHY_PWR_CTRL. GPIO / Native functionality controlled using soft strap. GPIO11 I/O 3.3 V Suspend Native Yes Multiplexed with SMBALERT#. (Note 10) GPIO10 I/O 3.3 V Suspend Native Yes Multiplexed with OC6#. (Note 10) GPIO9 I/O 3.3 V Suspend Native Yes Multiplexed with OC5#. (Note 10) GPIO8 I/O 3.3 V Suspend GPO Yes GPIO[7:6] I/O 3.3 V Core GPI Yes GPIO[5:2] I/OD 5V Core GPI Yes GPIO1 I/O 3.3 V Core GPI Yes GPIO0 I/O 3.3 V Core GPI Yes Description Unmultiplexed Multiplexed with TACH[3:2]. Mobile: Used as GPIO[7:6] only. Multiplexed with PIRQ[H:E]# (Note 5). Multiplexed with TACH1. Mobile: Used as GPIO1 only. Unmultiplexed NOTES: 1. All GPIOs can be configured as either input or output. 2. GPI[15:0] can be configured to cause a SMI# or SCI. Note that a GPI can be routed to either an SMI# or an SCI, but not both. 3. Some GPIOs exist in the VccSus3_3 power plane. Care must be taken to make sure GPIO signals are not driven high into powered-down planes. Also, external devices should not be driving powered down GPIOs high. Some GPIOs may be connected to pins on devices that exist in the core well. If these GPIOs are outputs, there is a danger that a loss of core power (PWROK low) or a Power Button Override event will result in the PCH driving a pin to a logic 1 to another device that is powered down. 4. The functionality that is multiplexed with the GPIO may not be used in desktop configuration. 5. When this signal is configured as GPO, the output stage is an open drain. 6. In a ME disabled system, GPIO31 may be used as ACPRESENT from the EC. 7. GPIO18 will toggle at a frequency of approximately 1 Hz when the signal is programmed as a GPIO (when configured as an output) by BIOS. 8. This pins are used as Functional straps. See Section 2.28.1 for more detail. 9. For functional purposes of SLP_LAN# (the native functionality of the pin), this pin always behaves as an output even if the GPIO defaults to an input. Therefore, this pin cannot be used as a true GPIO29 by system designers. If Host BIOS does not control SLP_LAN# control, SLP_LAN# behavior will be based on the setting of the RTC backed SLP_LAN# Default Bit (D31:F0:A4h:Bit 8). 10. When the multiplexed GPIO is used as GPIO functionality, care should be taken to ensure the signal is stable in its inactive state of the native functionality, immediately after reset until it is initialized to GPIO functionality. 11. GPIO13 is powered by VccSusHDA (either 3.3 V or 1.5 V). Voltage tolerance on the signal is the same as VccSusHDA. Datasheet 89 Signal Description 2.26 Manageability Signals The following signals can be optionally used by the PCH Management engine supported applications and appropriately configured by Management Engine firmware. When configured and used as a Manageability function, the associated host GPIO functionality is no longer available. If the Manageability function is not used in a platform, the signal can be used as a host General Purpose I/O or a native function. Table 2-26. Manageability Signals Name Type GPIO30/ PROC_MISSING (Desktop Only) SATA5GP / GPIO49 / TEMP_ALERT# ACPRESENT (Mobile Only)/ GPIO31 SUS_PWR_DN_ACK (Mobile Only)/ GPIO30 Description I Used to indicate Processor Missing to the PCH Management Engine. O Used as an alert (active low) to indicate to the external controller (such as, EC or SIO) that temperatures are out of range for the PCH or Graphics/Memory Controller or the processor core. I Used in Mobile systems. Input signal from the Embedded Controller to indicate AC power source or the system battery. Active High indicates AC power. NOTE: This Signal is required unless using Intel Management Engine Ignition firmware. O Active High output signal asserted by the Intel(R) ME to the Embedded Controller, when it does not require the PCH Suspend well to be powered. NOTE: This signal is required by Management Engine in all platforms. NOTE: SLP_LAN#/GPIO29 may also be configured by ME FW in Sx/Moff. See SLP_LAN#/GPIO29 signal description for details. 90 Datasheet Signal Description 2.27 Power and Ground Signals Table 2-27. Power and Ground Signals (Sheet 1 of 2) Name Description DcpRTC Decoupling: This signal is for RTC decoupling only. This signal requires decoupling. DcpSST Decoupling: Internally generated 1.5V powered off of Suspend Well. This signal requires decoupling. Decoupling is required even if this feature is not used. DcpSus Decoupling: 1.05 V Suspend well supply that is supplied internally by Internal VRs. This signal requires decoupling. DcpSusByp Decoupling: 1.05 V Suspend well supply that is supplied internally by Internal VRs. This signal requires decoupling. V5REF V5REF_Sus Reference for 5 V tolerance on core well inputs. This power may be shut off in S3, S4, S5 or G3 states. Reference for 5 V tolerance on suspend well inputs. This power is not expected to be shut off unless the system is unplugged. VccCore 1.05 V supply for core well logic. This power may be shut off in S3, S4, S5 or G3 states. Vcc3_3 3.3 V supply for core well I/O buffers. This power may be shut off in S3, S4, S5 or G3 states. VccME 1.05 V supply for the Intel(R) Management Engine. This plane must be on in S0 and other times the Intel(R) Management Engine is used. VccME3_3 3.3 V supply for the Intel(R) Management Engine I/O and SPI I/O. This is a separate power plane that may or may not be powered in S3-S5 states. This plane must be on in S0 and other times the Intel(R) Management Engine is used. Power supply for DMI. VccDMI VccLAN 1.1 V or 1.05 V based on the processor used. See the respective processor documentation to find the appropriate voltage level. 1.05 V supply for LAN controller logic. This is a separate power plane that may or may not be powered in S3-S5 states. NOTE: VccLAN may be grounded if Intel LAN is disabled. 3.3 V (can drop to 2.0 V min. in G3 state) supply for the RTC well. This power is not expected to be shut off unless the RTC battery is removed or completely drained. VccRTC NOTE: Implementations should not attempt to clear CMOS by using a jumper to pull VccRTC low. Clearing CMOS in a PCH-based platform can be done by using a jumper on RTCRST# or GPI. VccIO VccSus3_3 3.3 V supply for suspend well I/O buffers. This power is not expected to be shut off unless the system is unplugged. VccSusHDA Suspend supply for Intel(R) High Definition Audio. This pin can be either 1.5 or 3.3 V. VccVRM VccpNAND Datasheet 1.05 V supply for core well I/O buffers. This power may be shut off in S3, S4, S5 or G3 states. 1.8 V supply for internal PLL and VRMs This pin should be pulled up to 1.8V or 3.3V. 91 Signal Description Table 2-27. Power and Ground Signals (Sheet 2 of 2) Name VccADPLLA 1.05 V supply for Display PLL A Analog Power. This power is supplied by the core well. VccADPLLB 1.05 V supply for Display PLL B Analog Power. This power is supplied by the core well. VccADAC 3.3 V supply for Display DAC Analog Power. This power is supplied by the core well. Vss Grounds. VSS_NCTF Non-Critical To Function. These pins are for package mechanical reliability. NOTE: These pins should be connected to Ground. Vcc3_3_NCTF Non-Critical To Function. These pins are for package mechanical reliability. NOTE: These pins should be connected the same as the Vcc3_3 pins. VccRTC_NCTF Non-Critical To Function. These pins are for package mechanical reliability. NOTE: These pins should be connected to DcpRTC or left as No Connect. VccSUS3_3_N CTF Non-Critical To Function. These pins are for package mechanical reliability. NOTE: These pins should be connected the same as the VccSUS3_3 pins. V_CPU_IO_NC TF Non-Critical To Function. These pins are for package mechanical reliability. NOTE: These pins should be connected the same as the V_CPU_IO pins. TP22_NCTF Non-Critical To Function. These pins are for package mechanical reliability. NOTE: These pins should be connected to Ground. VccAClk 1.05 V Analog power supply for internal clock PLL. This requires a filter and power is supplied by the core well. NOTE: This pin can be left as no connect in On-Die VR enabled mode (default). VccSATAPLL 1.05 V Analog power supply for SATA. This signal is used for the analog power for SATA. This requires an LC filter and is supplied by the core well. Must be powered even if SATA is not used. NOTE: This pin can be left as no connect in On-Die VR enabled mode (default). VccAPLLEXP 1.05 V Analog Power for DMI. This power is supplied by the core well. This requires an LC filter. NOTE: This pin can be left as no connect in On-Die VR enabled mode (default). VccFDIPLL 1.05 V analog power supply for the FDI PLL. This power is supplied with core well. This requires an LC filter. NOTE: This pin can be left as no connect in On-Die VR enabled mode (default). VccALVDS 3.3 V Analog power supply for LVDS (Mobile Only) VccTX_LVDS V_CPU_IO 92 Description 1.8 V I/O power supply for LVDS. (Mobile Only) This power is supplied by core well. Powered by the same supply as the processor I/O voltage. This supply is used to drive the processor interface signals. See the respective processor documentation to find the appropriate voltage level. Datasheet Signal Description 2.28 Pin Straps 2.28.1 Functional Straps The following signals are used for static configuration. They are sampled at the rising edge of PWROK to select configurations (except as noted), and then revert later to their normal usage. To invoke the associated mode, the signal should be driven at least four PCI clocks prior to the time it is sampled. The PCH has implemented Soft Straps. Soft Straps are used to configure specific functions within the PCH and processor very early in the boot process before BIOS or SW intervention. When Descriptor Mode is enabled, the PCH will read Soft Strap data out of the SPI device prior to the de-assertion of reset to both the Management Engine and the Host system. See Section 5.24.2 for information on Descriptor Mode. Table 2-28. Functional Strap Definitions (Sheet 1 of 4) Signal Usage When Sampled Comment The signal has a weak internal pull-down. SPKR INIT3_3V# No Reboot Rising edge of PWROK Reserved Rising edge of PWROK NOTE: The internal pull-down is disabled after PLTRST# deasserts. If the signal is sampled high, this indicates that the system is strapped to the "No Reboot" mode (the PCH will disable the TCO Timer system reboot feature). The status of this strap is readable using the NO REBOOT bit (Chipset Config Registers: Offset 3410h:bit 5). This signal has a weak internal pull up. Note that the internal pull-up is disabled after PLTRST# de-asserts. NOTE: This signal should not be pulled low. The signal has a weak internal pull-up. If the signal is sampled low, this indicates that the system is strapped to the "topblock swap" mode. GNT[3]#/ GPIO[55] INTVRMEN Datasheet Top-Block Swap Override Integrated 1.05 V VRM Enable / Disable The status of this strap is readable using the Top Swap bit (Chipset Config Registers:Offset 3414h:bit 0). Rising edge of PWROK NOTES: 1. The internal pull-up is disabled after PLTRST# deasserts. 2. Software will not be able to clear the Top-Swap bit until the system is rebooted without GNT3#/GPIO55 being pulled down. Integrated 1.05 V VRMs is enabled when high Always NOTE: This signal should always be pulled high 93 Signal Description Table 2-28. Functional Strap Definitions (Sheet 2 of 4) Signal Usage When Sampled Comment This signal has a weak internal pull-up. Note that the internal pull-up is disabled after PCIRST# deasserts. This field determines the destination of accesses to the BIOS memory range. Also, controllable using Boot BIOS Destination bit (Chipset Config Registers:Offset 3410h:bit 11). This strap is used in conjunction with Boot BIOS Destination Selection 0 strap. GNT1# / GPIO51 Boot BIOS Strap bit [1] BBS[1] Rising edge of PWROK Bit11 Bit 10 Boot BIOS Destination 0 1 Reserved 1 0 PCI 1 1 SPI 0 0 LPC NOTE: If option 00 LPC is selected, BIOS may still be placed on LPC; however, all platforms with the PCH require SPI flash connected directly to the PCH SPI bus with a valid descriptor to boot. NOTE: Booting to PCI is intended for debut/testing only. Boot BIOS Destination Select to LPC/PCI by functional strap or using Boot BIOS Destination Bit will not affect SPI accesses initiated by Intel(R) Management Engine or Integrated GbE LAN. This Signal has a weak internal pull-up. Note that the internal pull-up is disabled after PCIRST# deasserts. This field determines the destination of accesses to the BIOS memory range. Also, controllable using Boot BIOS Destination bit (Chipset Config Registers:Offset 3410h:bit 10). This strap is used in conjunction with Boot BIOS Destination Selection 1 strap. GNT[0]# Boot BIOS Strap bit[0] BBS[0] Rising edge of PWROK Bit11 Bit 10 Boot BIOS Destination 0 1 Reserved 1 0 PCI 1 1 SPI 0 0 LPC NOTE: If option 00 LPC is selected, BIOS may still be placed on LPC; however, all platforms with the PCH require SPI flash connected directly to the PCH's SPI bus with a valid descriptor to boot. NOTE: Booting to PCI is intended for debut/testing only. Boot BIOS Destination Select to LPC/PCI by functional strap or using Boot BIOS Destination Bit will not affect SPI accesses initiated by Management Engine or Integrated GbE LAN. 94 Datasheet Signal Description Table 2-28. Functional Strap Definitions (Sheet 3 of 4) Signal Usage When Sampled Comment This Signal has a weak internal pull-up. Note that the internal pull-up is disabled after PCIRST# deasserts. GNT2#/ GPIO53 ESI Strap (Server Only) Rising edge of PWROK Tying this strap low configures DMI for ESI compatible operation. NOTE: ESI compatible mode is for server platforms only. This signal should not be pulled low for desktop and mobile. NV_ALE Reserved Rising edge of PWROK This signal has a weak internal pull down. NOTE: This signal should not be pulled high Signal has a weak internal pull-up. If strap is sampled high, the security measures defined in the Flash Descriptor will be in effect (default). If sampled low, the Flash Descriptor Security will be overridden. HDA_DOCK_E N#/GPIO[33] Flash Descriptor Security Override/ ME Debug Mode Rising edge of PWROK This strap should only be asserted low using external pull down in manufacturing/debug environments ONLY. NOTE: Asserting the GPIO33 low on the rising edge of PWROK will also halt Intel(R) Management Engine after chipset bringup and disable runtime Intel(R) Management Engine features. This is a debug mode and must not be asserted after manufacturing/ debug. SPI_MOSI Reserved Rising edge of MEPWROK This signal has a weak internal pull-down resistor. This signal must be sampled low. NV_CLE DMI Termination Voltage Rising edge of PWROK HDA_SDO Reserved Rising edge of RSMRST# This signal has a weak internal pull down. NOTE: This signal should not be pulled high GPIO8 Reserved Rising edge of RSMRST# This signal has a weak internal pull up. Note that the weak internal pull-up is disabled after RSMRST# de-asserts. NOTE: This signal should not be pulled low GPIO27 Reserved Rising edge of RSMRST# This signal has a weak internal pull-up. note that the weak internal pull-up is disabled after RSMRST# de-asserts. NOTE: This signal should not be pulled low and can be left as a No Connect. HDA_SYNC On-Die PLL Voltage Regulator Voltage Select Rising edge of RSMRST# pin Datasheet This signal has a weak internal pull-down. This signal has a weak internal pull down. On-Die PLL VR is supplied by 1.8 V when sampled low. NOTE: This signal should not be pulled high. 95 Signal Description Table 2-28. Functional Strap Definitions (Sheet 4 of 4) Signal Usage When Sampled Comment Low = Intel(R) Management Engine Crypto Transport Layer Security (TLS) cipher suite with no confidentiality High = Intel(R) Management Engine Crypto TLS cipher suite with confidentiality GPIO15 Reserved Rising edge of RSMRST# pin This signal has a weak internal pull down. NOTE: A strong pull up may be needed for GPIO functionality NOTE: This signal is required to be pulled up to enable TLS. If this signal is pulled down or left floating Intel(R) RPAT and Intel(R) AMT with TLS will not be functional. This signal has a weak internal pull-down. L_DDC_DATA LVDS Rising Edge of PWROK Note that the weak internal pull-down is disabled after PLTRST# de-asserts. LVDS is enabled when sampled high. When sampled low LVDS is Disabled. This signal has a weak internal pull-down. SDVO_CTRLDA TA Digital Display Port (Port B) Rising Edge of PWROK Note that the weak internal pull-down is disabled after PLTRST# de-asserts. Port B is enabled when sampled high. When sampled low Port B is Disabled. This signal has a weak internal pull-down. DDPC_CTRLDA TA Digital Display Port (Port C) Rising Edge of PWROK Note that the weak internal pull-down is disabled after PLTRST# de-asserts. Port C is enabled when sampled high. When sampled low Port C is Disabled. This signal has a weak internal pull-down. DDPD_CTRLDA TA Digital Display Port (Port D) Rising Edge of PWROK Note that the weak internal pull-down is disabled after PLTRST# de-asserts. Port D is enabled when sampled high. When sampled low Port D is Disabled. NOTE: See Section 3.1 for full details on pull-up/pull-down resistors. 96 Datasheet Signal Description 2.28.2 External RTC Circuitry The PCH implements an internal oscillator circuit that is sensitive to step voltage changes in VccRTC. Figure 2-2 shows an example schematic recommended to ensure correct operation of the PCH RTC. Figure 2-2. Example External RTC Circuit 3.3V Sus VCCRTC Schottky Diodes 1uF 0.1uF RTCX2 1 K Vbatt 20 K 20 K R1 10M 32.768 KHz Xtal RTCX1 1.0 uF C1 1.0 uF C2 RTCRST# SRTCRST# Notes: 1. The exact capacitor values for C1 and C2 must be based on the crystal maker recommendations. 2. Vbatt is voltage provided by the battery. 3. VccRTC, RTCX1, and RTCX2 are PCH pins. 4. VccRTC powers PCH RTC well. 5. RTCX1 is the input to the internal oscillator. 6. RTCX2 is the amplified feedback for the external crystal. Datasheet 97 Signal Description 98 Datasheet PCH Pin States 3 PCH Pin States 3.1 Integrated Pull-Ups and Pull-Downs Table 3-1. Integrated Pull-Up and Pull-Down Resistors (Sheet 1 of 2) Signal Resistor Nominal Notes CL_CLK1 Pull-up/Pulldown 32/100 13, 22 CL_DATA1 Pull-up/Pulldown 32/100 13, 22 CLKOUTFLEX[3:0]/GPIO[67:64] Pull-down 20K 1, 16 HDA_RST# Pull-down 20K 2, 16 GPIO15 Pull-down 20K 3, 21 HDA_BCLK Pull-down 20K 1, 16 HDA_DOCK_EN#/GPIO33 Pull-up 20K 3, 7 HDA_SDIN[3:0] Pull-down 20K 2 HDA_DOCK_RST# /GPIO13 Pull-down 20K 19, 20 HDA_SYNC, HDA_SDO Pull-down 20K 2, 7 GNT[3:1]#/GPIO[55,53,51], GNT0# Pull-up 20K 3, 11, 12 GPIO8 Pull-up 20K 3, 21 LAD[3:0]# / FHW[3:0]# Pull-up 20K 3 LDRQ0#, LDRQ1# / GPIO23 Pull-up 20K 3 NV_ALE, NV_CLE Pull-down 20K 13 PME# Pull-up 20K 3 INIT3_3V# Pull-up 20K 3 PWRBTN# Pull-up 20K 3 SPI_MOSI Pull-down 20K 3,7 Pull-up 20K 3 Pull-down 20K 3,15 Pull-up 20K 3;only on TACH[3:0] USB[13:0] [P,N] Pull-down 20K 5 DDP[D:C]_CTRLCLK Pull-down 10K DDP[D:C]_CRTLDATA Pull down 20K 3, 15 SDVO_CTRLDATA,L_DDC_DATA Pull down 20K 3, 15 SDVO_CTRLCLK SPI_CS0#, SPI_CS1#, SPI_MISO SPKR TACH[3:0]/GPIO[7,6,1,17] Datasheet Pull down 20K 3 BATLOW#/GPIO72 Pull-up 20K 3 CLKOUT_PCI[4:0] Pull-down 20K 1, 16 GPIO27 Pull-up 20K 3, 21 PCIECLKRQ0#/GPIO73 Pull-up 20K 3, 21 JTAG_TDI, JTAG_TMS, TRST# Pull-up 20K 1, 17 99 PCH Pin States Table 3-1. Integrated Pull-Up and Pull-Down Resistors (Sheet 2 of 2) Signal Resistor Nominal Notes Pull-down 20K 1, 18 GPIO28 Pull-up 20K 3 PCIECLKRQ6#/GPIO45 Pull-up 20K 3 JTAG_TCK NOTES: 1. Simulation data shows that these resistor values can range from 10 k to 40 k. 2. Simulation data shows that these resistor values can range from 9 k to 50 k. 3. Simulation data shows that these resistor values can range from 15 k to 40 k. 4. Simulation data shows that these resistor values can range from 7.5k to 16k. 5. Simulation data shows that these resistor values can range from 14.25 k to 24.8 k. 6. Simulation data shows that these resistor values can range from 10 k to 30 k. 7. The pull-up or pull-down on this signal is only enabled at boot/reset for strapping function. 8. Simulation data shows that these resistor values can range from 10 k to 20 k. The internal pull-up is only enabled during PLTRST# assertion. 9. The pull-down on this signal is only enabled when in S3. 10. The pull-up or pull-down on this signal is only enabled during reset. 11. The pull-up on this signal is not enabled when PCIRST# is high. 12. The pull-up on this signal is not enabled when PWROK is low. 13. Simulation data shows that these resistor values can range from 15 k to 31 k. 14. The pull-down is disabled after pins are driven strongly to logic zero when PWROK is asserted. 15. The Pull-up or pull down is not active when PLTRST# is NOT asserted. 16. The pull-down is enabled when PWROK is low. 17. External termination is also required on these signals for JTAG enabling. Internal pull-up is added in B-step Silicon. 18. External termination is also required on these signals for JTAG enabling. Internal pull-down is added in B-step Silicon. 19. Simulation data shows that these resistor values can range from 20 k to 27 k. 20. Pull-down is enabled only when PCIRST# pin is driven low. 21. Pull-up is disabled after RSMRST# is de-asserted. 22. The Controller Link Clock and Data buffers use internal pull-up or pull-down resistors to drive a logical 1 or 0. 100 Datasheet PCH Pin States 3.2 Output and I/O Signals Planes and States Table 3.2and Table 3-3 shows the power plane associated with the output and I/O signals, as well as the state at various times. Within the table, the following terms are used: Note: "High-Z" Tri-state. The PCH not driving the signal high or low. "High" The PCH is driving the signal to a logic 1. "Low" The PCH is driving the signal to a logic 0. "Defined" Driven to a level that is defined by the function or external pullup/pull-down resistor (will be high or low). "Undefined" The PCH is driving the signal, but the value is indeterminate. "Running" Clock is toggling or signal is transitioning because function not stopping. "Off" The power plane is off; The PCH is not driving when configured as an output or sampling when configured as an input. "Input" The PCH is sampling and signal state determined by external driver. Signal levels are the same in S4 and S5, except as noted. The PCH suspend well signal states are indeterminate and undefined and may glitch prior to RSMRST# de-assertion. This does not apply to SLP_S3#, SLP_S4#, SLP_S5#, GPIO24, and GPIO29. These signals are determinate and defined prior to RSMRST# deassertion. The PCH core well signal states are indeterminate and undefined and may glitch prior to PWROK assertion. This does not apply to THRMTRIP#. This signal is determinate and defined prior to PWROK assertion. Table 3-2. Power Plane and States for Output and I/O Signals for Desktop Configurations (Sheet 1 of 5) Signal Name Power Plane During Reset2 Immediately after Reset2 S0/S1 S3 S4/S5 High5 Defined OFF OFF High Defined Off Off Low Undefined Defined Off Off PCI Express* PETp[8:1], PETn[8:1] Core High DMI DMI[3:0]TXP, DMI[3:0]TXN Core High PCI Bus AD[31:0] Core C/BE[3:0]# Core Low Undefined Defined Off Off DEVSEL# Core High-Z High-Z High-Z Off Off FRAME# Core High-Z High-Z High-Z Off Off GNT0#8, GNT[3:1]#8/ GPIO[55, 53, 51] Core High High High Off Off IRDY#, TRDY# Core High-Z High-Z High-Z Off Off Datasheet 101 PCH Pin States Table 3-2. Power Plane and States for Output and I/O Signals for Desktop Configurations (Sheet 2 of 5) Signal Name Power Plane During Reset2 Immediately after Reset2 S0/S1 S3 S4/S5 PAR Core Low Low Low Off Off PCIRST# Suspend Low High High Low Low PERR# Core High-Z High-Z High-Z Off Off PLOCK# Core High-Z High-Z High-Z Off Off STOP# Core High-Z High-Z High-Z Off Off LPC/FWH Interface LAD[3:0] / FWH[3:0] Core High High High Off Off LFRAME# / FWH[4] Core High High High Off Off INIT3_3V#8 Core High High High Off Off Defined Off Off SATA Interface SATA[5:0]TXP, SATA[5:0]TXN Core High-Z High-Z SATALED# Core High-Z High-Z Defined Off Off SATAICOMPO Core High High Defined Off Off SCLOCK/GPIO22 Core High-Z (Input) High-Z (Input) Defined Off Off SLOAD/GPIO38 Core High-Z (Input) High-Z (Input) Defined Off Off SDATAOUT[1:0]/ GPIO[48,39] Core High-Z High-Z High-Z Off Off Interrupts PIRQ[A:D]#, Core High-Z High-Z High-Z Off Off PIRQ[H:E]# / GPIO[5:2] Core High-Z (Input) High-Z (Input) Defined Off Off SERIRQ Core High-Z High-Z High-Z Off Off USB Interface USB[13:0][P,N] Suspend Low Low Defined Defined Defined USBRBIAS Suspend High-Z High-Z High High High Power Management LAN_PHY_PWR_CTRL11 /GPIO12 Suspend Low Low Defined Defined Defined PLTRST# Suspend Low High High Low Low 6 Suspend Low High High Defined Defined SLP_S3# Suspend Low High High Low Low SLP_M# SLP_S4# Suspend Low High High High Low SLP_S5#/GPIO63 Suspend Low High High High Low3 High High Low Low SUS_STAT#/GPIO61 Suspend Low SUSCLK/GPIO62 Suspend Low DRAMPWROK Suspend Low High-Z High-Z High-Z Low PMSYNCH Core Low Low Defined Off Off 102 Running Datasheet PCH Pin States Table 3-2. Power Plane and States for Output and I/O Signals for Desktop Configurations (Sheet 3 of 5) Power Plane During Reset2 Immediately after Reset2 S0/S1 STP_PCI#/GPIO34 Core High-Z (Input) High-Z (Input) Defined Off Off SLP_LAN#/GPIO299 Suspend Low Defined9 High Defined Defined Signal Name S3 S4/S5 Processor Interface A20M# CPU Dependant on A20GATE Signal See Note 1 High Off Off PROCPWRGD CPU Low3 High High Off Off Defined Defined Defined SMBus Interface SMBCLK, SMBDATA Suspend High-Z High-Z System Management Interface SML0ALERT# / GPIO60 Suspend High-Z High-Z12 Defined Defined Defined SML0DATA Suspend High-Z High-Z Defined Defined Defined SML0CLK Suspend High-Z High-Z Defined Defined Defined GPIO58/SML1CLK Suspend High-Z High-Z Defined Defined Defined SML1ALERT#/GPIO74 Suspend High-Z High-Z Defined Defined Defined SML1DATA//GPIO75 Suspend High-Z High-Z Defined Defined Defined JTAG_TDO Suspend High-Z High-Z High-Z High-Z High-Z Defined Off Off Miscellaneous Signals SPKR 8 Core Low Low Clocking Signals CLKOUT_BCLK0_P / CLKOUT_PCIE8_P, Core Running Running Running Off Off Core Running Running Running Off Off CLKOUT_DMI_P, CLKOUT_DMI_N Core Running Running Running Off Off CLKOUT_PEG_A_P, CLKOUT_PEG_A_N Core Running Running Running Off Off CLKOUT_PEG_B_P, CLKOUT_PEG_B_N Core Running Running Running Off Off CLKOUT_PCIE[7:0] P, CLKOUT_PCIE[7:0] N Core Running Running Running Off Off CLKOUT_PCI[4:0] Core Running Running Running Off Off Off Off CLKOUT_BCLK0_N / CLKOUT_PCIE8_N CLKOUT_DP_P / CLKOUT_BCLK1_P, CLKOUT_DP_N / CLKOUT_BCLK1_N CLKOUTFLEX[3:0]/ GPIO[67:64] Core Low Low Running/ Low XTAL25_OUT Core Running Running Running Off Off XCLK_RCOMP Core High-Z High-Z High-Z Off Off Datasheet 103 PCH Pin States Table 3-2. Power Plane and States for Output and I/O Signals for Desktop Configurations (Sheet 4 of 5) Signal Name Power Plane During Reset2 Immediately after Reset2 S0/S1 S3 S4/S5 Intel(R) High Definition Audio Interface HDA_RST# HDA Suspend Low Low4 Defined Low Low HDA_SDO8 HDA Suspend Low Low Low Low Low HDA_SYNC8 HDA Suspend Low Low Low Low Low HDA_BCLK HDA Suspend Low Low Low Low Low UnMultiplexed GPIO Signals GPIO88 Suspend High High Defined Defined Defined GPIO158 Suspend Low Low Defined Defined Defined GPIO24 Suspend Low Low Defined Defined Defined GPIO278 Suspend High Low Defined Defined Defined GPIO32 Core High High Defined Off Off GPIO35 Core Low Low Defined Off Off GPIO57 Suspend High-Z (Input) High-Z (Input) Defined Defined Defined GPIO72 Suspend High-Z (Input) High-Z (Input) Defined Defined Defined Multiplexed GPIO Signals used as GPIO only GPIO0 Core High-Z (Input) High-Z(Input) Defined Off Off GPIO1310, 14 HDA Suspend Low High-Z Defined Defined Defined GPIO28 Suspend High-Z High-Z Defined Defined Defined GPIO3010 Suspend High-Z (Input) High-Z (Input) Defined Defined Defined GPIO3110 Suspend High-Z (Input) High-Z (Input) Defined Defined Defined GPIO3310 Core High High Defined Off Off SPI Interface ME33IO High13 High Defined Defined Defined SPI_CS1# ME33IO 13 High High Defined Defined Defined SPI_MOSI8 ME33IO Low13 Low Defined Defined Defined ME33IO 13 Low Running Defined Defined SPI_CS0# SPI_CLK Low Intel(R) Quiet System Technology and Thermal Reporting PWM[3:0] Core High-Z Low Defined Off Off SST Suspend High-Z Low Defined Off Off PECI CPU Low Low Defined Off Off Analog Display / CRT DAC Signals CRT_RED, CRT_GREEN, CRT_BLUE Core High-Z High-Z High-Z Off Off DAC_IREF Core High-Z High-Z High-Z Off Off 104 Datasheet PCH Pin States Table 3-2. Power Plane and States for Output and I/O Signals for Desktop Configurations (Sheet 5 of 5) Signal Name Power Plane During Reset2 Immediately after Reset2 S0/S1 S3 S4/S5 CRT_HSYNC Core Low Low Low Off Off CRT_VSYNC Core Low Low Low Off Off CRT_DDC_CLK Core High-Z High-Z High-Z Off Off CRT_DDC_DATA Core High-Z High-Z High-Z Off Off CRT_IRTN Core High-Z High-Z High-Z Off Off Intel(R) FDI_RXP[7:0], Flexible Display Interface Core High-Z High-Z High-Z Off Off FDI_FSYNC[1:0] Core High-Z High-Z High-Z Off Off FDI_LSYNC[1:0] Core High-Z High-Z High-Z Off Off FDI_INT Core High-Z High-Z High-Z Off Off FDI_RXN[7:0] Digital Display Interface DDP[D:B]_[3:0]P, DDP[D:B]_[3:0]N DDP[D:B]_AUXP, DDP[D:B]_AUXN SDVO_CTRLCLK, SDVO_CTRLDATA DDPC_CTRLCLK, DDPC_CTRLDATA DDPD_CTRLCLK, DDPD_CTRLDATA Core High-Z High-Z Defined Off Off Core High-Z High-Z Defined Off Off Core Low High-Z Defined Off Off Core High-Z High-Z Defined Off Off Core High-Z High-Z Defined Off Off NOTES: 1. PCH drives PROCPWRGD after PWROK and SYS_PWROK signals are active, and thus will be driven low by PCH when either of these signals are inactive. During boot, or during a hard reset with power cycling, PROCPWRGD will be expected to transition from low to High-Z 2. The states of Core and processor signals are evaluated at the times During PLTRST# and Immediately after PLTRST#. The states of the LAN and GLAN signals are evaluated at the times During LAN_RST# and Immediately after LAN_RST#. The states of the Controller Link signals are taken at the times During CL_RST1# and Immediately after CL_RST1#. The states of the Suspend signals are evaluated at the times During RSMRST# and Immediately after RSMRST#, with an exception to GPIO signals; see Section 2.25 for more details on GPIO state after reset. The states of the HDA signals are evaluated at the times During HDA_RST# and Immediately after HDA_RST#. 3. SLP_S5# signals will be high in the S4 state. 4. Low until Intel(R) High Definition Audio Controller Reset bit set (D27:F0:Offset HDBAR+08h:bit 0), at which time HDA_RST# will be High and HDA_BIT_CLK will be Running. 5. PETp/n[8:1] high until port is enabled by software. 6. The SLP_M# state will be determined by Intel(R) Management Engine Firmware. 7. The state of signals in S3-S5 will be defined by Intel(R) AMT Policies. 8. This signal is sampled as a functional strap during reset. See Functional straps definition table for usage. 9. SLP_LAN# behavior after reset is dependent on value of SLP_LAN# default value bit. Datasheet 105 PCH Pin States 10. 11. 12. 13. 14. Table 3-3. Native functionality multiplexed with these GPIOs are not used in Desktop Configurations. During reset an Internal pull-down will drive this pin low. The pull down will be disabled after PCIRST# de-assertion. Native/GPIO functionality controlled using soft straps. Default to Native functionality until soft straps are loaded. State of the pins depend on the source of VccME3_3 power. Pin is tri-stated prior to MEPWROK assertion during Reset. GPIO13 is powered by VccSusHDA (either 3.3 V or 1.5 V). Pin tolerance is determined by VccSusHDA voltage. Power Plane and States for Output and I/O Signals for Mobile Configurations (Sheet 1 of 5) Signal Name Power Plane During Reset2 Immediately after Reset2 C-x states S0/S1 S3 S4/S5 Defined Defined Off Off Defined Defined Off Off PCI Express* PET[8:1]p, PET[8:1]n Core High High5 DMI DMI[3:0]TXP, DMI[3:0]TXN Core High High PCI Bus AD[31:0] Core Low Undefined Defined Defined Off Off C/BE[3:0]# Core Low Undefined Defined Defined Off Off CLKRUN#18 (Mobile Only) / GPIO32 Core Low Low Defined Defined Off Off GNT0#8 GNT[3:1]#8/ GPIO[55,53,51] Core High High High High Off Off DEVSEL# Core High-Z High-Z High-Z High-Z Off Off FRAME# Core High-Z High-Z High-Z High-Z Off Off IRDY#, TRDY# Core High-Z High-Z High-Z High-Z Off Off PAR Core Low Undefined Defined Defined Off Off PCIRST# Suspend Low High High High Low Low PERR# Core High-Z High-Z High-Z High-Z Off Off PLOCK# Core High-Z High-Z High-Z High-Z Off Off STOP# Core High-Z High-Z High-Z High-Z Off Off 106 Datasheet PCH Pin States Table 3-3. Power Plane and States for Output and I/O Signals for Mobile Configurations (Sheet 2 of 5) Signal Name Power Plane During Reset2 Immediately after Reset2 C-x states S0/S1 S3 S4/S5 High Off Off LPC/FWH Interface LAD[3:0] / FWH[3:0] Core High High High LFRAME# / FWH[4] Core High High High High Off Off INIT3_3V#8 Core High High High High Off Off Defined Defined Off Off SATA Interface SATA[5:0]TXP, SATA[5:0]TXN Core High-Z High-Z SATALED# Core High-Z High-Z Defined Defined Off Off SATAICOMPO Core High-Z High-Z Defined Defined Off Off SCLOCK/GPIO22 Core High-Z (Input) High-Z (Input) Defined Defined Off Off SLOAD/GPIO38 Core High-Z (Input) High-Z (Input) Defined Defined Off Off SDATAOUT[1:0]/ GPIO[48,39] Core High-Z (Input) High-Z (Input) Defined Defined Off Off Interrupts Core High-Z High-Z Defined Defined Off Off PIRQ[H:E]# / GPIO[5:2] PIRQ[A:D]# Core High-Z (Input) High-Z (Input) Defined Defined Off Off SERIRQ Core High-Z High-Z Running High-Z Off Off USB Interface USB[13:0][P,N] Suspend Low Low Defined Defined Defined Defined USBRBIAS Suspend High-Z High-Z Defined Defined Defined Defined PLTRST# Suspend Low High High High Low Low Defined Power Management SLP_M#6 Suspend Low High High High Defined SLP_S3# Suspend Low High High High Low Low SLP_S4# Suspend Low High High High High Defined SLP_S5#/GPIO63 Suspend Low High High High High Low3 SUS_STAT#/GPIO61 Suspend Low High High High Low Low SUSCLK Suspend Low SUS_PWR_DN_ACK/ GPIO30 Suspend High-Z (Input) High-Z (Input) Defined Defined Defined Defined Running DRAMPWROK Suspend Low High-Z High-Z High-Z High-Z Low LAN_PHY_PWR_CTR L10/GPIO12 Suspend Low Low Defined Defined Defined Defined PMSYNCH Core Low Low Defined/ Low Defined Off Off STP_PCI#/GPIO34 Core High-Z (Input) High-Z (Input) Defined Defined Off Off SLP_LAN#15/ GPIO29 Suspend Low Defined15 High High Defined Defined Datasheet 107 PCH Pin States Table 3-3. Power Plane and States for Output and I/O Signals for Mobile Configurations (Sheet 3 of 5) Signal Name Power Plane During Reset2 Immediately after Reset2 C-x states S0/S1 S3 S4/S5 High High Off Off Defined Defined Defined Defined Defined Defined Defined Processor Interface PROCPWRGD 1 Core Low High Suspend High-Z SMBus Interface SMBCLK, SMBDATA High-Z System Management Interface SML0ALERT#/ GPIO60 Suspend High-Z High-Z SML0DATA Suspend High-Z High-Z Defined Defined Defined Defined SML0CLK Suspend High-Z High-Z Defined Defined Defined Defined GPIO58/SML1CLK Suspend High-Z High-Z Defined Defined Defined Defined SML1ALERT#/ GPIO74 Suspend High-Z High-Z Defined Defined Defined Defined SML1DATA/GPIO75 Suspend High-Z High-Z Defined Defined Defined Defined JTAG_TDO Suspend High-Z High-Z High-Z High-Z High-Z High-Z Defined Defined Off Off Defined Miscellaneous Signals SPKR8 Core Low Low Clocking Signals CLKOUT_BCLK0_P / CLKOUT_PCIEB_P, Core Running Running Running Running Off Off Core Running Running Running Running Off Off CLKOUT_DMI_P, CLKOUT_DMI_N Core Running Running Running Running Off Off CLKOUT_BCLK0_N / CLKOUT_PCIEB_N CLKOUT_DP_P / CLKOUT_BCLK1_P, CLKOUT_DP_N / CLKOUT_BCLK1_N, XTAL25_OUT Core High-Z High-Z High-Z High-Z Off Off XCLK_RCOMP Core High-Z High-Z High-Z High-Z Off Off CLKOUT_PEG_A_P, CLKOUT_PEG_A_N Core Running Running Running Running Off Off CLKOUT_PEG_B_P, CLKOUT_PEG_B_N Core Running Running Running Running Off Off CLKOUT_PCIE[7:0] P, CLKOUT_PCIE[7:0] N Core Running Running Running Running Off Off CLKOUT_PCI[4:0] Core Running Running Running Running Off Off CLKOUTFLEX[3:0]/ GPIO[67:64] Core Low Low Running/ Low Running Off Off Defined Low Low Intel(R) High Definition Audio Interface HDA_RST# 108 HDA Suspend Low Low4 High Datasheet PCH Pin States Table 3-3. Power Plane and States for Output and I/O Signals for Mobile Configurations (Sheet 4 of 5) Signal Name Power Plane During Reset2 Immediately after Reset2 C-x states S0/S1 S3 S4/S5 HDA_SDO8 HDA Suspend Low Low Low Low Low Low HDA_SYNC8 HDA Suspend Low Low Low Low Low Low HDA_BCLK HDA Suspend Low Low Low Low Low Low HDA_DOCK_EN#/ GPIO33 Core High High12 Defined Defined Off Off HDA_DOCK_RST#/ GPIO1319 HDA Suspend Low11 High-Z11 Defined Defined Defined Defined UnMultiplexed GPIO Signals 8 GPIO8 Suspend High High Defined Defined Defined Defined GPIO158 Suspend Low Low Defined Defined Defined Defined GPIO24 Suspend Low Low Defined Defined Defined Defined GPIO278 Suspend High Low Defined Defined Defined Defined GPIO28 Suspend High-Z High-Z Defined Defined Defined Defined GPIO35 Core Low Low Defined Defined Off Off Suspend High-Z (Input) High-Z (Input) Defined Defined Defined Defined GPIO57 Multiplexed GPIO Signals used as GPIO only GPIO0 Core High-Z (Input) High-Z (Input) Defined Defined Off Off GPIO[7,6,1,17]9 Core High-Z High-Z Defined Defined Off Off SPI_CS0# ME33IO High17 High Defined Defined Defined Defined 17 SPI Interface SPI_CS1# ME33IO High High Defined Defined Defined Defined SPI_MOSI8 ME33IO Low17 Low Defined Defined Defined Defined SPI_CLK ME33IO Low17 Low Running Running Defined Defined (R) Intel PECI CPU Quiet System Technology and Thermal Reporting Low Low Defined Defined Off Off Controller Link CL_CLK16 Suspend High/Low14 High/Low14 Defined Defined Defined Defined CL_DATA16 Suspend High/Low14 High/Low14 Defined Defined Defined Defined 6 Suspend Low High High High High High CL_RST1# LVDS Signals LVDSA_DATA[3:0], LVDSA_DATA#[3:0] LVDSA_CLK, LVDSA_CLK# LVDSB_DATA[3:0], LVDSB_DATA#[3:0] Datasheet Core High-Z High-Z Defined/ High-Z13 Defined/ High-Z13 Off Off Core High-Z High-Z Defined/ High-Z13 Defined/ High-Z13 Off Off Core High-Z High-Z Defined/ High-Z13 Defined/ High-Z13 Off Off 109 PCH Pin States Table 3-3. Power Plane and States for Output and I/O Signals for Mobile Configurations (Sheet 5 of 5) Power Plane During Reset2 Immediately after Reset2 C-x states S0/S1 S3 S4/S5 Core High-Z High-Z Defined/ High-Z13 Defined/ High-Z13 Off Off L_DDC_CLK Core High-Z High-Z High-Z High-Z Off Off L_DDC_DATA Core Low High-Z High-Z High-Z Off Off High/ High-Z13 Off Off Signal Name LVDSB_CLK, LVDSB_CLK# L_VDD_EN Core High-Z High-Z High/ High-Z13 L_BKLTEN Core High-Z High-Z High/ High-Z13 High/ High-Z13 Off Off L_BKLTCTL Core High-Z High-Z High/ High-Z13 High/ High-Z13 Off Off L_CTRL_CLK Core High-Z High-Z High-Z High-Z Off Off L_CTRL_DATA Core High-Z High-Z High-Z High-Z Off Off LVD_VBG, LVD_VREFH, LVD_VREFL Core High-Z High-Z High-Z High-Z Off Off Analog Display / CRT DAC Signals CRT_RED, CRT_GREEN, CRT_BLUE Core High-Z High-Z Defined Defined Off Off DAC_IREF Core High-Z High-Z High-Z High-Z Off Off CRT_HSYNC Core Low Low Low Low Off Off CRT_VSYNC Core Low Low Low Low Off Off CRT_DDC_CLK Core High-Z High-Z High-Z High-Z Off Off CRT_DDC_DATA Core High-Z High-Z High-Z High-Z Off Off CRT_IRTN Core High-Z High-Z High-Z High-Z Off Off (R) Intel FDI_RXP[7:0], Core High-Z FDI_FSYNC[1:0] Core FDI_LSYNC[1:0] Core FDI_INT Core FDI_RXN[7:0] Flexible Display Interface High-Z Defined Defined Off Off High-Z High-Z Defined Defined Off Off High-Z High-Z Defined Defined Off Off High-Z High-Z Defined Defined Off Off Digital Display Interface DDP[D:B]_[3:0]P, DDP[D:B]_[3:0]N, Core High-Z High-Z Defined Defined Off Off DDP[D:B]_AUXP, DDP[D:B]_AUXN Core High-Z High-Z Defined Defined Off Off Core Low High-Z Defined Defined Off Off Core High-Z High-Z Defined Defined High-Z Off Core High-Z High-Z Defined Defined High-Z Off SDVO_CTRLCLK, SDVO_CTRLDATA DDPC_CTRLCLK, DDPC_CTRLDATA DDPD_CTRLCLK, DDPD_CTRLDATA 110 Datasheet PCH Pin States NOTES: 1. PCH drives PROCPWRGD after PWROK and SYS_PWROK signals are active, and thus will be driven low by PCH when either of these signals are inactive. During boot, or during a hard reset with power cycling, PROCPWRGD will be expected to transition from low to High-Z 2. The states of Core and processor signals are evaluated at the times during PLTRST# and Immediately after PLTRST#. The states of the LAN and GLAN signals are evaluated at the times During LAN_RST# and Immediately after LAN_RST#. The states of the Controller Link signals are taken at the times During CL_RST1# and Immediately after CL_RST1#. The states of the Suspend signals are evaluated at the times During RSMRST# and Immediately after RSMRST#, with an exception to GPIO signals; see Section 2.25 for more details on GPIO state after reset. The states of the HDA signals are evaluated at the times During HDA_RST# and Immediately after HDA_RST#. 3. SLP_S5# signals will be high in the S4 state. 4. Low until Intel(R) High Definition Audio Controller Reset bit set (D27:F0:Offset HDBAR+08h:bit 0), at which time HDA_RST# will be High and HDA_BIT_CLK will be Running. 5. PETp/n[8:1] high until port is enabled by software. 6. The SLP_M# state will be determined by Intel(R) Management Engine Firmware. 7. The state of signals in S3-S5 will be defined by Intel(R) AMT Policies. 8. This signal is sampled as a functional strap during Reset. See Functional straps definition table for usage. 9. Native functionality multiplexed with these GPIOs is not used in Mobile Configurations. 10. Native/GPIO functionality controlled using soft straps. Default to Native functionality until soft straps are loaded. 11. This pin will be driven to a High when Dock Attach bit is set (Docking Control Register D27:F0 offset 4Ch). During reset an Internal pull-down will drive this pin low. The pull down will be disabled after PCIRST# de-assertion. 12. This pin will be driven to a Low when Dock Attach bit is set (Docking Control Register D27:F0 offset 4Ch). 13. PCH tristates these signals when LVDS port is disabled. 14. Controller Link Clock and Data buffers use internal pull-up and pull-down resistors to drive a logical 1 or a 0. 15. SLP_LAN# behavior after reset is dependent on value of SLP_LAN# default value bit. 16. State of the pins depend on the source of VccME3_3 power. 17. Pin is tri-stated prior to MEPWROK assertion during Reset. 18. CLKRUN# is driven to a logic 1 during reset for Mobile configurations (default is native function) to ensure that PCI clocks can toggle before devices come out of reset. For desktop configurations this pin defaults to GPIO mode strongly driving a logic 1. 19. HDA_DOCK_RST#/GPIO13 is powered by VccSusHDA (either 3.3 V or 1.5 V). Pin tolerance is determined by VccSusHDA voltage. Datasheet 111 PCH Pin States 3.3 Power Planes for Input Signals Table 3-4 and Table 3-5 show the power plane associated with each input signal, as well as what device drives the signal at various times. Valid states include: * High * Low * Static: Will be high or low, but will not change * Driven: Will be high or low, and is allowed to change * Running: For input clocks The PCH suspend well signal states are indeterminate and undefined and may glitch prior to RSMRST# de-assertion. This does not apply to LAN_RST#, SLP_S3#, SLP_S4#, S4_STATE# and SLP_S5#. These signals are determinate and defined prior to RSMRST# de-assertion. The PCH core well signal states are indeterminate and undefined and may glitch prior to PWROK assertion. This does not apply to FERR# and THRMTRIP#. These signals are determinate and defined prior to PWROK assertion. Table 3-4. Power Plane for Input Signals for Desktop Configurations (Sheet 1 of 3) Signal Name Power Well Driver During Reset S0/S1 S3 S4/S5 DMI DMI_CLKP, DMI_CLKN Core Clock Generator Running Off Off DMI[3:0]RXP, DMI[3:0]RXN Core Processor Driven Off Off Driven Off Off External Pull-up Driven Off Off PCI Express* PER[8:1]p, PERn[8:1]n Core PCI Express* Device PCI Bus REQ0#, REQ1# / GPIO501 REQ2# / GPIO521 REQ3# / GPIO541 Core PME# Suspend Internal Pull-up Driven Driven Driven SERR# Core PCI Bus Peripherals High Off Off LPC Interface LDRQ0# LDRQ1# / GPIO231 Core LPC Devices High Off Off Core LPC Devices High Off Off SATA Interface 112 SATA[5:0]RXP, SATA[5:0]RXN Core SATA Drive Driven Off Off SATAICOMPI Core High-Z High-Z Defined Off SATA[5:4]GP/TEMP_ALERT/ GPIO[49,16]1 Core External Device or External Pull-up/Pull-down Driven Off Off SATA[3:0]GP / GPIO[37, 36, 19, 21]1 Core External Device or External Pull-up/Pull-down Driven Off Off Datasheet PCH Pin States Table 3-4. Power Plane for Input Signals for Desktop Configurations (Sheet 2 of 3) Signal Name Power Well Driver During Reset S0/S1 S3 S4/S5 USB Interface OC[7:0]#/ GPIO[14,10,9,43:40,59]1 Suspend External Pull-ups Driven Driven Driven USBRBIAS# Suspend External Pull-down Driven Driven Driven High Driven Driven Power Management MEPWROK Suspend External Circuit LAN_RST# Suspend External Circuit High Static Static PWRBTN# Suspend Internal Pull-up Driven Driven Driven PWROK RTC System Power Supply Driven Driven Driven RI# Suspend Serial Port Buffer Driven Driven Driven RSMRST# RTC External RC Circuit High High High SYS_RESET# Core External Circuit Driven Off Off SYS_PWROK Suspend External Circuit High Driven Driven THRMTRIP# CPU External Thermal Sensor Driven Off Off WAKE# Suspend External Pull-up Driven Driven Driven Processor Interface A20GATE Core External Micro controller Static Off Off RCIN# Core External Micro controller High Off Off System Management Interface SMBALERT# / GPIO11 Suspend External Pull-up Driven Driven Driven INTRUDER# RTC External Switch Driven High High JTAG Interface JTAG_TDI Suspend Internal Pull-up4 High High High JTAG_TMS Suspend Internal Pull-up4 High High High 5 Low Low Low JTAG_TCK Suspend Internal Pull-down Miscellaneous Signals INTVRMEN2 RTC External Pull-up High High High RTCRST# RTC External RC Circuit High High High SRTCRST# RTC External RC Circuit High High High Digital Display Interface DDP[B:C:D]_HPD SDVO_INTP, SDVO_INTN SDVO_TVCLKINP, SDVO_TVCLKINN Datasheet Core External Pull-down Driven Off Off Core SDVO controller device Driven Off Off Core SDVO controller device Driven Off Off 113 PCH Pin States Table 3-4. Power Plane for Input Signals for Desktop Configurations (Sheet 3 of 3) Signal Name SDVO_STALLP, SDVO_STALLN Power Well Driver During Reset S0/S1 S3 S4/S5 Core SDVO controller device Driven Off Off Driven Off Off Intel(R) Flexible Display Interface FDI_RXP[7:0], FDI_RXN[7:0] Core Processor Clock Interface CLKIN_DMI_P, CLKIN_DMI_N Core Clock Generator Running Running Off CLKIN_SATA_N/CKSSCD_N, CLKIN_SATA_P/CKSSCD_P Core Clock Generator Running Running Off CLKIN_BCLK_P, CLKIN_BCLK_N Core Clock Generator Running Running Off CLKIN_DOT_96P, CLKIN_DOT_96N Core Clock Generator Running Running Off CLKIN_PCILOOPBACK Core Clock Generator Running Running Off PCIECLKRQ[7:3]#/ GPIO[46:44,26:25]1,PCIECL KRQ0#/GPIO731 Suspend External Pull-up Driven Driven Driven PCIECLKRQ[2:1]#/ GPIO[20:18]1 Core External Pull-up Driven Driven Off PEG_A_CLKRQ#/GPIO471, PEG_B_CLKRQ#/GPIO561 Suspend External Pull-up Driven Driven Driven REFCLK14IN Core Clock Generator Running Running Off XTAL25_IN Core Clock Generator High-Z High-Z High-Z Low Low Low Driven Driven Driven Driven Off Off Intel(R) High Definition Audio Interface HDA_SDIN[3:0] Suspend Internal Pull-down SPI Interface SPI_MISO ME33IO External Pull-up Intel(R) Quiet System Technology TACH[3:0]/GPIO[7,6,1,17]1 Core External Pull-up NOTES: 1. These signals can be configured as outputs in GPIO mode. 2. This signal is sampled as a functional strap during Reset. See Functional straps definition table for usage. 3. State of the pins depend on the source of VccME3_3 power. 4. Internal pull-ups are implemented. 5. Internal pull-down is implemented. 114 Datasheet PCH Pin States Table 3-5. Power Plane for Input Signals for Mobile Configurations (Sheet 1 of 3) Signal Name Power Well Driver During Reset C-x states S0/S1 S3 S4/S5 DMI DMI_CLKP, DMI_CLKN Core Clock Generator Running Running Off Off DMI[3:0]RXP, DMI[3:0]RXN Core Processor Driven Driven Off Off Driven Driven Off Off Driven Driven Off Off PCI Express* PER[6:1]p, PER[6:1]n Core PCI Express* Device PCI Bus REQ0#, REQ1# / GPIO501 REQ2# / GPIO521 REQ3# / GPIO541 Core PME# Suspend Internal Pull-up Driven Driven Driven Driven SERR# Core PCI Bus Peripherals Driven High Off Off External Pull-up LPC Interface LDRQ0# 1 LDRQ1# / GPIO23 Core Internal Pull-up Driven High Off Off Core Internal Pull-up Driven High Off Off SATA Interface SATA[5:0]RXP, SATA[5:0]RXN Core SATA Drive Driven Driven Off Off SATAICOMPI Core High-Z High-Z Defined Off Off SATA[5:4]GP/ TEMP_ALERT/ GPIO[49,16]1 Core External Device or External Pull-up/Pull-down Driven Driven Off Off SATA[3:0]GP / GPIO[37, 36, 19, 21]1 Core External Device or External Pull-up/Pull-down Driven Driven Off Off USB Interface OC[7:0]#/ GPIO[14,10,9,43:40, 59] Suspend External Pull-ups Driven Driven Driven Driven USBRBIAS# Suspend External Pull-down Driven Driven Driven Driven Power Management ACPRESENT (Mobile Only) /GPIO311 Suspend External Microcontroller Driven Driven Driven Driven BATLOW# (Mobile Only) /GPIO721 Suspend External Pull-up High High Driven Driven MEPWROK Suspend External Circuit Driven Driven Driven Driven LAN_RST# Suspend External Circuit High High High High PWRBTN# Suspend Internal Pull-up Driven Driven Driven Driven PWROK RTC System Power Supply Driven Driven Off Off RI# Suspend Serial Port Buffer Driven Driven Driven Driven Datasheet 115 PCH Pin States Table 3-5. Power Plane for Input Signals for Mobile Configurations (Sheet 2 of 3) Signal Name Power Well Driver During Reset RSMRST# RTC External RC Circuit SYS_RESET# Core External Circuit C-x states S0/S1 S3 S4/S5 High High High High Driven Driven Off Off THRMTRIP# CPU Thermal Sensor Driven Driven Off Off WAKE# Suspend External Pull-up Driven Driven Driven Driven Processor Interface A20GATE Core External Microcontroller Static Static Off Off RCIN# Core External Microcontroller High High Off Off System Management Interface SMBALERT# / GPIO11 Suspend External Pull-up Driven Driven Driven Driven INTRUDER# RTC External Switch Driven Driven High High JTAG Interface Suspend Internal Pull-up4 High High High High JTAG_TMS Suspend Internal Pull-up 4 High High High High JTAG_TCK Suspend Internal Pull-down5 Low Low Low Low High High High High JTAG_TDI Miscellaneous Signals INTVRMEN2 RTC External Pull-up RTCRST# RTC External RC Circuit High High High High SRTCRST# RTC External RC Circuit High High High High Driven Low Low Low Driven Driven Driven Driven Intel(R) High Definition Audio Interface HDA_SDIN[3:0] Suspend Intel(R) High Definition Audio Codec SPI Interface SPI_MISO ME33IO Internal Pull-up Clock Interface CLKIN_DMI_P, CLKIN_DMI_N Core Clock Generator Running Running Off Off CLKIN_SATA_N/ CKSSCD_N, CLKIN_SATA_P/ CKSSCD_P Core Clock Generator Running Running Off Off CLKIN_BCLK_P, CLKIN_BCLK_N Core Clock Generator Running Running Off Off CLKIN_DOT_96P, CLKIN_DOT_96N Core Clock Generator Running Running Off Off CLKIN_PCILOOPBACK Core Clock Generator Running Running Off Off PCIECLKRQ[7:3]#/ GPIO[46:44,26:25]1, PCIECLKRQ0#/ GPIO731 Suspend External Pull-up Driven Driven Driven Driven 116 Datasheet PCH Pin States Table 3-5. Power Plane for Input Signals for Mobile Configurations (Sheet 3 of 3) Signal Name Power Well Driver During Reset C-x states S0/S1 S3 S4/S5 PCIECLKRQ[2:1]#/ GPIO[20:18]1 Core External Pull-up Driven Driven Off Off PEG_A_CLKRQ#/ GPIO471, PEG_B_CLKRQ#/ GPIO561 Suspend External Pull-up Driven Driven Driven Driven XTAL25_IN Core Clock Generator High-Z High-Z Off Off REFCLK14IN Core Clock Generator High-Z High-Z Off Off CLKIN_PCILOOPBACK Core Clock Generator High-Z High-Z Off Off Driven Off Off Intel FDI_RXP[7:0], FDI_RXN[7:0] Core (R) Flexible Display Interface Processor Driven Digital Display Interface DDP[B:C:D]_HPD SDVO_INTP, SDVO_INTN SDVO_TVCLKINP, SDVO_TVCLKINN SDVO_STALLP, SDVO_STALLN Core External Pull-down Driven Driven Off Off Core SDVO controller device Driven Driven Off Off Core SDVO controller device Driven Driven Off Off Core SDVO controller device Driven Driven Off Off NOTES: 1. These signals can be configured as outputs in GPIO mode. 2. This signal is sampled as a functional strap during Reset. See Functional straps definition table for usage. 3. State of the pins depend on the source of VccME3_3 power. 4. Internal pull-ups are implemented . 5. Internal pull-down is implemented only. Datasheet 117 PCH Pin States 118 Datasheet System Clocks 4 System Clocks Table 4-1 shows the system clock input to the PCH. Table 4-2 shows system clock domains generated by the PCH in buffered mode. Figure 4-1 shows the assumed connection of the Main Clock Generator to the PCH in buffer mode to the various system components. For complete details of the system clocking solution, see the system's clock generator component specification, Clock Signals section and the PCH Clocks. Table 4-1. PCH System Clock Inputs Clock Domain CLKIN_SATA_P / CKSSCD_P, CLKIN_SATA_N / CKSSCD_N Frequency 100 MHz Usage 100 MHz differential reference clock from a clock chip for use only as a 100 MHz source for SATA clock. 100 MHz differential reference clock from a clock chip used for DMI. CLKIN_DMI_P, CLKIN_DMI_N CLKIN_PCILOOPB ACK 33 MHz REFCLK14IN 14.31818 MHz CLKIN_DOT96P, CLKIN_DOT96N 96 MHz CLKIN_BCLK_P, CLKIN_BCLK_N Datasheet 100 MHz 133 MHZ NOTE: This input clock is required to be PCIe 2.0 jitter spec compliant from a clock chip, for PCIe 2.0 discrete Graphics platforms. 33 MHz clock feedback input to reduce skew between PCH PCI clock and clock observed by connected PCI devices. This signal must be connected to one of the pins in the group CLKOUT_PCI[4:0] Single-ended 14.31818 MHz reference clock driven by a clock chip. Used for ACPI timer and Multimedia Timers. Expected to be shut off during S3. 96 MHz differential reference clock from a clock chip. Used to generate the 48-MHz USB/SIO clocks and 24 MHz HDA bit clock. 133 MHz differential reference clock from a clock chip in Buffer-Through Mode. 119 System Clocks Table 4-2. PCH System Clock Outputs Clock Domain Frequency Usage CLKOUT_PCI[4:0] 33 MHz Single Ended 33.3MHz outputs to PCI connectors/ devices. One of these signals must be connected to CLKIN_PCILOOPBACK to function as a PCI clock loopback. This allows skew control for variable lengths of CLKOUT_PCI[4:0]. PCI Bus, LPC I/F. These only go to external PCI and LPC devices. CLKOUT_PCIE[7:0]P, CLKOUT_PCIE[7:0]N 100 MHz 100 MHz PCIe* Gen1.1 specification differential output to PCI Express* devices 100 MHz 100 MHz PCIe* Gen2 specification differential output to PCI Express* Graphics devices CLKOUT_PEG_A_P, CLKOUT_PEG_A_N, CLKOUT_PEG_B_P, CLKOUT_PEG_B_N, CLKOUTFLEX0 / GPIO64, CLKOUTFLEX1 / GPIO65, CLKOUTFLEX2 / GPIO66 33 MHz or 14.31818 MHz output CLKOUTFLEX3 / GPIO67 48 MHz, 33 MHz, or 14.31818 MHz 48 MHz, 33 MHz, 14.31818 MHz output SPI_CLK 17.86 MHz/ 31.25 MHz Drive SPI devices connected to the PCH. Generated by the PCH. 133 MHz Or 100 MHz 133 MHz Differential output to Processor or 100 MHz PCIe* Gen 1.1 specification differential output to PCI Express* devices 120 MHz or 133 MHz 120 MHz Differential output for DisplayPort reference or 133 MHz Differential output to Processor CLKOUT_BCLK0_P / CLKOUT_PCIE8_P, CLKOUT_BCLK0_N / CLKOUT_PCIE8_N CLKOUT_DP_P / CLKOUT_BCLK1_P, CLKOUT_DP_N / CLKOUT_BCLK1_N 120 33 MHz or 14.31818 MHz Datasheet System Clocks Figure 4-1. PCH High-Level Clock Diagram Datasheet 121 System Clocks 122 Datasheet Functional Description 5 Functional Description This chapter describes the functions and interfaces of the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset. 5.1 DMI-to-PCI Bridge (D30:F0) The DMI-to-PCI bridge resides in PCI Device 30, Function 0 on bus 0. This portion of the PCH implements the buffering and control logic between PCI and Direct Media Interface (DMI). The arbitration for the PCI bus is handled by this PCI device. The PCI decoder in this device must decode the ranges for the DMI. All register contents are lost when core well power is removed. Direct Media Interface (DMI) is the chip-to-chip connection between the Processor and the PCH. This high-speed interface integrates advanced priority-based servicing allowing for concurrent traffic and true isochronous transfer capabilities. Base functionality is completely software transparent permitting current and legacy software to operate normally. To provide for true isochronous transfers and configurable Quality of Service (QoS) transactions, the PCH supports two virtual channels on DMI--VC0 and VC1. These two channels provide a fixed arbitration scheme where VC1 is always the highest priority. VC0 is the default conduit of traffic for DMI and is always enabled. VC1 must be specifically enabled and configured at both ends of the DMI link (that is, the PCH and processor). Configuration registers for DMI, virtual channel support, and DMI active state power management (ASPM) are in the RCRB space in the Chipset Config Registers (Chapter 10.1.1). DMI is also capable of operating in an Enterprise Southbridge Interface (ESI) compatible mode. ESI is a chip-to-chip connection for server chipsets. In this ESIcompatible mode, the DMI signals require AC coupling. A hardware strap is used to configure DMI in ESI-compatible mode see Section 2.28 for details. 5.1.1 PCI Bus Interface The PCH PCI interface supports PCI Local Bus Specification, Revision 2.3, at 33 MHz. The PCH integrates a PCI arbiter that supports up to four external PCI bus masters in addition to the internal PCH requests. 5.1.2 PCI Bridge As an Initiator The bridge initiates cycles on the PCI bus when granted by the PCI arbiter. The bridge generates the following cycle types: Table 5-1. PCI Bridge Initiator Cycle Types Command Datasheet C/BE# Notes I/O Read/Write 2h/3h Non-posted Memory Read/Write 6h/7h Writes are posted Configuration Read/Write Ah/Bh Non-posted Special Cycles 1h Posted 123 Functional Description 5.1.2.1 Memory Reads and Writes The bridge bursts memory writes on PCI that are received as a single packet from DMI. 5.1.2.2 I/O Reads and Writes The bridge generates single DW I/O read and write cycles. When the cycle completes on the PCI bus, the bridge generates a corresponding completion on DMI. If the cycle is retried, the cycle is kept in the down bound queue and may be passed by a postable cycle. 5.1.2.3 Configuration Reads and Writes The bridge generates single DW configuration read and write cycles. When the cycle completes on the PCI bus, the bridge generates a corresponding completion. If the cycle is retried, the cycle is kept in the down bound queue and may be passed by a postable cycle. 5.1.2.4 Locked Cycles The bridge propagates locks from DMI per the PCI Local Bus Specification. The PCI bridge implements bus lock, which means the arbiter will not grant to any agent except DMI while locked. If a locked read results in a target or master abort, the lock is not established (as per the PCI Local Bus Specification). Agents north of the PCH must not forward a subsequent locked read to the bridge if they see the first one finish with a failed completion. 5.1.2.5 Target / Master Aborts When a cycle initiated by the bridge is master/target aborted, the bridge will not reattempt the same cycle. For multiple DW cycles, the bridge increments the address and attempts the next DW of the transaction. For all non-postable cycles, a target abort response packet is returned for each DW that was master or target aborted on PCI. The bridge drops posted writes that abort. 5.1.2.6 Secondary Master Latency Timer The bridge implements a Master Latency Timer using the SMLT register which, upon expiration, causes the de-assertion of FRAME# at the next legal clock edge when there is another active request to use the PCI bus. 5.1.2.7 Dual Address Cycle (DAC) The bridge will issue full 64-bit dual address cycles for device memory-mapped registers above 4 GB. 124 Datasheet Functional Description 5.1.2.8 Memory and I/O Decode to PCI The PCI bridge in the PCH is a subtractive decode agent, which follows the following rules when forwarding a cycle from DMI to the PCI interface: * The PCI bridge will positively decode any memory/IO address within its window registers, assuming PCICMD.MSE (D30:F0:Offset 04h:bit 1) is set for memory windows and PCICMD.IOSE (D30:F0:Offset 04h:bit 0) is set for I/O windows. * The PCI bridge will subtractively decode any 64-bit memory address not claimed by another agent, assuming PCICMD.MSE (D30:F0:Offset 04h:bit 1) is set. * The PCI bridge will subtractively decode any 16-bit I/O address not claimed by another agent assuming PCICMD.IOSE (D30:F0:Offset 04h:bit 0) is set. * If BCTRL.IE (D30:F0:Offset 3Eh:bit 2) is set, the PCI bridge will not positively forward from primary to secondary called out ranges in the I/O window per PCI Local Bus Specification (I/O transactions addressing the last 768 bytes in each, 1 KB block: offsets 100h to 3FFh). The PCI bridge will still take them subtractively assuming the above rules. * If BCTRL.VGAE (D30:F0:Offset 3Eh:bit 3) is set, the PCI bridge will positively forward from primary to secondary I/O and memory ranges as called out in the PCI Bridge Specification, assuming the above rules are met. 5.1.3 Parity Error Detection and Generation PCI parity errors can be detected and reported. The following behavioral rules apply: * When a parity error is detected on PCI, the bridge sets the SECSTS.DPE (D30:F0:Offset 1Eh:bit 15). * If the bridge is a master and BCTRL.PERE (D30:F0:Offset 3Eh:bit 0) is set and one of the parity errors defined below is detected on PCI, then the bridge will set SECSTS.DPD (D30:F0:Offset 1Eh:bit 8) and will also generate an internal SERR#. -- During a write cycle, the PERR# signal is active, or -- A data parity error is detected while performing a read cycle * If an address or command parity error is detected on PCI and PCICMD.SEE (D30:F0:Offset 04h:bit 8), BCTRL.PERE, and BCTRL.SEE (D30:F0:Offset 3Eh:bit 1) are all set, the bridge will set PSTS.SSE (D30:F0:Offset 06h:bit 14) and generate an internal SERR#. * If the PSTS.SSE is set because of an address parity error and the PCICMD.SEE is set, the bridge will generate an internal SERR#. * When bad parity is detected from DMI, bad parity will be driven on all data from the bridge. * When an address parity error is detected on PCI, the PCI bridge will never claim the cycle. This is a slight deviation from the PCI bridge spec, which says that a cycle should be claimed if BCTRL.PERE is not set. However, DMI does not have a concept of address parity error, so claiming the cycle could result in the rest of the system seeing a bad transaction as a good transaction. Datasheet 125 Functional Description 5.1.4 PCIRST# The PCIRST# pin is generated under two conditions: * PLTRST# active * BCTRL.SBR (D30:F0:Offset 3Eh:bit 6) set to 1 The PCIRST# pin is in the suspend well. PCIRST# should be tied to PCI bus agents, but not other agents in the system. 5.1.5 Peer Cycles The PCI bridge may be the initiator of peer cycles. Peer cycles include memory, I/O, and configuration cycle types. Peer cycles are only allowed through VC0, and are enabled with the following bits: * BPC.PDE (D30:F0:Offset 4Ch:bit 2) - Memory and I/O cycles * BPC.CDE (D30:F0:Offset 4Ch:bit 1) - Configuration cycles When enabled for peer for one of the above cycle types, the PCI bridge will perform a peer decode to see if a peer agent can receive the cycle. When not enabled, memory cycles (posted and/or non-posted) are sent to DMI, and I/O and/or configuration cycles are not claimed. Configuration cycles have special considerations. Under the PCI Local Bus Specification, these cycles are not allowed to be forwarded upstream through a bridge. However, to enable things such as manageability, BPC.CDE can be set. When set, type 1 cycles are allowed into the part. The address format of the type 1 cycle is slightly different from a standard PCI configuration cycle to allow addressing of extended PCI space. The format is shown in Table 5-2. Table 5-2. Type 1 Address Format Bits 31:27 Reserved (same as the PCI Local Bus Specification) 26:24 Extended Configuration Address - allows addressing of up to 4K. These bits are combined with bits 7:2 to get the full register. 23:16 Bus Number (same as the PCI Local Bus Specification) 15:11 Device Number (same as the PCI Local Bus Specification) 10:8 7:2 Note: 126 Definition Function Number (same as the PCI Local Bus Specification) Register (same as the PCI Local Bus Specification) 1 0 0 Must be 1 to indicate a type 1 cycle. Type 0 cycles are not decoded. The PCH USB controllers cannot perform peer-to-peer traffic. Datasheet Functional Description 5.1.6 PCI-to-PCI Bridge Model From a software perspective, the PCH contains a PCI-to-PCI bridge. This bridge connects DMI to the PCI bus. By using the PCI-to-PCI bridge software model, the PCH can have its decode ranges programmed by existing plug-and-play software such that PCI ranges do not conflict with graphics aperture ranges in the Host controller. 5.1.7 IDSEL to Device Number Mapping When addressing devices on the external PCI bus (with the PCI slots), the PCH asserts one address signal as an IDSEL. When accessing device 0, the PCH asserts AD16. When accessing Device 1, the PCH asserts AD17. This mapping continues all the way up to device 15 where the PCH asserts AD31. Note that the PCH internal functions (Intel(R) High Definition Audio, USB, SATA and PCI Bridge) are enumerated like they are off of a separate PCI bus (DMI) from the external PCI bus. 5.1.8 Standard PCI Bus Configuration Mechanism The PCI Bus defines a slot based "configuration space" that allows each device to contain up to eight functions with each function containing up to 256, 8-bit configuration registers. The PCI Local Bus Specification, Revision 2.3 defines two bus cycles to access the PCI configuration space: Configuration Read and Configuration Write. Memory and I/O spaces are supported directly by the processor. Configuration space is supported by a mapping mechanism implemented within the PCH. The PCI Local Bus Specification, Revision 2.3 defines two mechanisms to access configuration space, Mechanism 1 and Mechanism 2. The PCH only supports Mechanism 1. Warning: Configuration writes to internal devices, when the devices are disabled, are illegal and may cause undefined results. 5.2 PCI Express* Root Ports (D28:F0,F1,F2,F3,F4,F5, F6, F7) There are eight root ports available in the PCH. The root ports are compliant to the PCI Express 2.0 specification running at 2.5 GT/s. The ports all reside in device 28, and take function 0 - 7. Port 1 is function 0, port 2 is function 1, port 3 is function 2, port 4 is function 3, port 5 is function 4, port 6 is function 5, port 7 is function 6, and port 8 is function 7. Note: This section assumes the default PCI Express Function Number-to-Root Port mapping is used. Function numbers for a given root port are assignable through the "Root Port Function Number and Hide for PCI Express Root Ports" registers (RCBA+0404h). PCI Express Root Ports 1-4 and Ports 5-8 can independently be configured as four x1s, two x2s, one x2 and 2 x1s, or one x4 port widths. The port configuration is set by soft straps in the Flash Descriptor. Note: Datasheet PCI Express port 7 and 8 are not available for the H55, HM55, and Intel 3400 chipsets. PCIe* ports are numbered from 1-8. 127 Functional Description 5.2.1 Interrupt Generation The root port generates interrupts on behalf of Hot-Plug and power management events, when enabled. These interrupts can either be pin based, or can be MSIs, when enabled. When an interrupt is generated using the legacy pin, the pin is internally routed to the PCH interrupt controllers. The pin that is driven is based upon the setting of the chipset configuration registers. Specifically, the chipset configuration registers used are the D28IP (Base address + 310Ch) and D28IR (Base address + 3146h) registers. Table 5-3 summarizes interrupt behavior for MSI and wire-modes. In the table "bits" refers to the Hot-Plug and PME interrupt bits. Table 5-3. MSI versus PCI IRQ Actions Interrupt Register Wire-Mode Action MSI Action All bits 0 Wire inactive No action One or more bits set to 1 Wire active Send message One or more bits set to 1, new bit gets set to 1 Wire active Send message One or more bits set to 1, software clears some (but not all) bits Wire active Send message One or more bits set to 1, software clears all bits Wire inactive No action Software clears one or more bits, and one or more bits are set on the same clock Wire active Send message 5.2.2 Power Management 5.2.2.1 S3/S4/S5 Support Software initiates the transition to S3/S4/S5 by performing an IO write to the Power Management Control register in the PCH. After the IO write completion has been returned to the processor, each root port will send a PME_Turn_Off TLP (Transaction Layer Packet) message on its downstream link. The device attached to the link will eventually respond with a PME_TO_Ack TLP message followed by sending a PM_Enter_L23 DLLP (Data Link Layer Packet) request to enter the L2/L3 Ready state. When all of the PCH root ports links are in the L2/L3 Ready state, the PCH power management control logic will proceed with the entry into S3/S4/S5. Prior to entering S3, software is required to put each device into D3HOT. When a device is put into D3HOT, it will initiate entry into a L1 link state by sending a PM_Enter_L1 DLLP. Thus under normal operating conditions when the root ports sends the PME_Turn_Off message the link will be in state L1. However, when the root port is instructed to send the PME_Turn_Off message, it will send it whether or not the link was in L1. Endpoints attached to PCH can make no assumptions about the state of the link prior to receiving a PME_Turn_Off message. 128 Datasheet Functional Description 5.2.2.2 Resuming from Suspended State The root port contains enough circuitry in the suspend well to detect a wake event through the WAKE# signal and to wake the system. When WAKE# is detected asserted, an internal signal is sent to the power management controller of the PCH to cause the system to wake up. This internal message is not logged in any register, nor is an interrupt/GPE generated due to it. 5.2.2.3 Device Initiated PM_PME Message When the system has returned to a working state from a previous low power state, a device requesting service will send a PM_PME message continuously, until acknowledge by the root port. The root port will take different actions depending upon whether this is the first PM_PME has been received, or whether a previous message has been received but not yet serviced by the operating system. If this is the first message received (RSTS.PS - D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset 60h:bit 16 is cleared), the root port will set RSTS.PS, and log the PME Requester ID into RSTS.RID (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset 60h:bits 15:0). If an interrupt is enabled using RCTL.PIE (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset 5Ch:bit 3), an interrupt will be generated. This interrupt can be either a pin or an MSI if MSI is enabled using MC.MSIE (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset 82h:bit 0). See Section 5.2.2.4 for SMI/SCI generation. If this is a subsequent message received (RSTS.PS is already set), the root port will set RSTS.PP (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset 60h:bit 17) and log the PME Requester ID from the message in a hidden register. No other action will be taken. When the first PME event is cleared by software clearing RSTS.PS, the root port will set RSTS.PS, clear RSTS.PP, and move the requester ID from the hidden register into RSTS.RID. If RCTL.PIE is set, an interrupt will be generated. If RCTL.PIE is not set, a message will be sent to the power management controller so that a GPE can be set. If messages have been logged (RSTS.PS is set), and RCTL.PIE is later written from a 0 to a 1, and interrupt will be generated. This last condition handles the case where the message was received prior to the operating system re-enabling interrupts after resuming from a low power state. 5.2.2.4 SMI/SCI Generation Interrupts for power management events are not supported on legacy operating systems. To support power management on non-PCI Express aware operating systems, PM events can be routed to generate SCI. To generate SCI, MPC.PMCE must be set. When set, a power management event will cause SMSCS.PMCS (D28:F0/F1/F2/F3/F4/ F5/F6/F7:Offset DCh:bit 31) to be set. Additionally, BIOS workarounds for power management can be supported by setting MPC.PMME (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset D8h:bit 0). When this bit is set, power management events will set SMSCS.PMMS (D28:F0/F1/F2/F3/F4/F5/F6/ F7:Offset DCh:bit 0), and SMI # will be generated. This bit will be set regardless of whether interrupts or SCI is enabled. The SMI# may occur concurrently with an interrupt or SCI. Datasheet 129 Functional Description 5.2.3 SERR# Generation SERR# may be generated using two paths - through PCI mechanisms involving bits in the PCI header, or through PCI Express* mechanisms involving bits in the PCI Express capability structure. Figure 5-1. Generation of SERR# to Platform Secondary Parity Error PCI PSTS.SSE Primary Parity Error Secondary SERR# PCICMD.SEE SERR# Correctable SERR# Fatal SERR# PCI Express Non-Fatal SERR# 5.2.4 Hot-Plug Each root port implements a Hot-Plug controller which performs the following: * Messages to turn on / off / blink LEDs * Presence and attention button detection * Interrupt generation The root port only allows Hot-Plug with modules (such as, ExpressCard*). Edgeconnector based Hot-Plug is not supported. 5.2.4.1 Presence Detection When a module is plugged in and power is supplied, the physical layer will detect the presence of the device, and the root port sets SLSTS.PDS (D28:F0/F1/F2/F3/F4/ F5:Offset 5Ah:bit 6) and SLSTS.PDC (D28:F0/F1/F2/F3:Offset 6h:bit 3). If SLCTL.PDE (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset 58h:bit 3) and SLCTL.HPE (D28:F0/F1/F2/F3/ F4/F5/F6/F7:Offset 58h:bit 5) are both set, the root port will also generate an interrupt. When a module is removed (using the physical layer detection), the root port clears SLSTS.PDS and sets SLSTS.PDC. If SLCTL.PDE and SLCTL.HPE are both set, the root port will also generate an interrupt. 130 Datasheet Functional Description 5.2.4.2 Message Generation When system software writes to SLCTL.AIC (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset 58h:bits 7:6) or SLCTL.PIC (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset 58h:bits 9:8), the root port will send a message down the link to change the state of LEDs on the module. Writes to these fields are non-postable cycles, and the resulting message is a postable cycle. When receiving one of these writes, the root port performs the following: * Changes the state in the register * Generates a completion into the upstream queue * Formulates a message for the downstream port if the field is written to regardless of if the field changed * Generates the message on the downstream port * When the last message of a command is transmitted, sets SLSTS.CCE (D28:F0/F1/ F2/F3/F4/F5/F6/F7:Offset 58h:bit 4) to indicate the command has completed. If SLCTL.CCE and SLCTL.HPE (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset 58h:bit 5) are set, the root port generates an interrupt. The command completed register (SLSTS.CC) applies only to commands issued by software to control the Attention Indicator (SLCTL.AIC), Power Indicator (SLCTL.PIC), or Power Controller (SLCTL.PCC). However, writes to other parts of the Slot Control Register would invariably end up writing to the indicators, power controller fields; Hence, any write to the Slot Control Register is considered a command and if enabled, will result in a command complete interrupt. The only exception to this rule is a write to disable the command complete interrupt which will not result in a command complete interrupt. A single write to the Slot Control register is considered to be a single command, and hence receives a single command complete, even if the write affects more than one field in the Slot Control Register. 5.2.4.3 Attention Button Detection When an attached device is ejected, an attention button could be pressed by the user. This attention button press will result in a the PCI Express message "Attention_Button_Pressed" from the device. Upon receiving this message, the root port will set SLSTS.ABP (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset 5Ah:bit 0). If SLCTL.ABE (D28:F0/F1/F2/F3/F4/F5:Offset 58h:bit 0) and SLCTL.HPE (D28:F0/F1/ F2/F3/F4/F5/F6/F7:Offset 58h:bit 5) are set, the Hot-Plug controller will also generate an interrupt. The interrupt is generated on an edge-event. For example, if SLSTS.ABP is already set, a new interrupt will not be generated. Datasheet 131 Functional Description 5.2.4.4 SMI/SCI Generation Interrupts for Hot-Plug events are not supported on legacy operating systems. To support Hot-Plug on non-PCI Express aware operating systems, Hot-Plug events can be routed to generate SCI. To generate SCI, MPC.HPCE (D28:F0/F1/F2/F3/F4/F5/F6/ F7:Offset D8h:bit 30) must be set. When set, enabled Hot-Plug events will cause SMSCS.HPCS (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset DCh:bit 30) to be set. Additionally, BIOS workarounds for Hot-Plug can be supported by setting MPC.HPME (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset D8h:bit 1). When this bit is set, Hot-Plug events can cause SMI status bits in SMSCS to be set. Supported Hot-Plug events and their corresponding SMSCS bit are: * Command Completed - SCSCS.HPCCM (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset DCh:bit 3) * Presence Detect Changed - SMSCS.HPPDM (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset DCh:bit 1) * Attention Button Pressed - SMSCS.HPABM (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset DCh:bit 2) * Link Active State Changed - SMSCS.HPLAS (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset DCh:bit 4) When any of these bits are set, SMI# will be generated. These bits are set regardless of whether interrupts or SCI are enabled for Hot-Plug events. The SMI# may occur concurrently with an interrupt or SCI. 5.3 Gigabit Ethernet Controller (B0:D25:F0) The PCH chipset integrates a Gigabit Ethernet (GbE) controller. The integrated GbE controller is compatible with the Intel(R) 82577/82578 Platform LAN Connect device. The integrated GbE controller provides two interfaces for 10/100/1000 Mb/s and manageability operation: * Based on PCI Express*--A high-speed SerDes interface using PCI Express electrical signaling at half speed while keeping the custom logical protocol for active state operation mode. * System Management Bus (SMBus)--A very low speed connection for low power state mode for manageability communication only. At this low power state mode the Ethernet link speed is reduced to 10 Mb/s. The 82577/82578 can be connected to any available PCI Express port in the PCH chipset. The 82577/82578 only runs at a speed of 1250 Mb/s, which is 1/2 of the gen1 2.5 Gb/s PCI Express frequency. Each of the PCI Express root ports in the PCH chipset have the ability to run at the 1250 Mb/s rate. There is no need to implement a mechanism to detect that the 82577/82578 is connected. The port configuration (if any), attached to the 82577/82578, is pre-loaded from the NVM. The selected port adjusts the transmitter to run at the 1250 Mb/s rate and does not need to be PCI Express compliant. Note: PCIe validation tools cannot be used for electrical validation of this interface; however, PCIe layout rules apply for on-board routing. The integrated GbE controller operates at full-duplex at all supported speeds or halfduplex at 10/100 Mb/s. It also adheres to the IEEE 802.3x Flow Control Specification. Note: 132 GbE operation (1000 Mb/s) is only supported in S0 mode. In Sx modes, SMBus is the only active bus and is used to support manageability/remote wake-up functionality. Datasheet Functional Description The integrated GbE controller provides a system interface using a PCI Express function. A full memory-mapped or I/O-mapped interface is provided to the software, along with DMA mechanisms for high performance data transfer. The integrated GbE controller features are: * Network Features -- Compliant with the 1 Gb/s Ethernet 802.3 802.3u 802.3ab specifications -- Multi-speed operation: 10/100/1000 Mb/s -- Full-duplex operation at 10/100/1000Mb/s: Half-duplex at 10/100 Mb/s -- Flow control support compliant with the 802.3X specification -- VLAN support compliant with the 802.3q specification -- MAC address filters: perfect match unicast filters; multicast hash filtering, broadcast filter and promiscuous mode -- PCI Express/SMBus interface to GbE PHYs * Host Interface Features -- 64-bit address master support for systems using more than 4 GB of physical memory -- Programmable host memory receive buffers (256 Bytes to 16 KB) -- Intelligent interrupt generation features to enhance driver performance -- Descriptor ring management hardware for transmit and receive -- Software controlled reset (resets everything except the configuration space) -- Message Signaled Interrupts * Performance Features -- Configurable receive and transmit data FIFO, programmable in 1 KB increments -- TCP segmentation capability compatible with NT 5.x off loading features -- Fragmented UDP checksum offload for packet reassembly -- IPv4 and IPv6 checksum offload support (receive, transmit, and TCP segmentation offload) -- Split header support to eliminate payload copy from user space to host space -- Receive Side Scaling (RSS) with two hardware receive queues -- Supports 9018 bytes of jumbo packets -- Packet buffer size -- LinkSec offload compliant with 802.3ae specification -- TimeSync offload compliant with 802.1as specification * Virtualization Technology Features -- Warm function reset - function level reset (FLR) -- VMDq1 * Power Management Features -- Magic Packet* wake-up enable with unique MAC address -- ACPI register set and power down functionality supporting D0 and D3 states -- Full wake up support (APM, ACPI) -- MAC power down at Sx, DMoff with and without WoL Datasheet 133 Functional Description 5.3.1 GbE PCI Express* Bus Interface The GbE controller has a PCI Express interface to the host processor and host memory. The following sections detail the bus transactions. 5.3.1.1 Transaction Layer The upper layer of the host architecture is the transaction layer. The transaction layer connects to the device core using an implementation specific protocol. Through this core-to-transaction-layer protocol, the application-specific parts of the device interact with the subsystem and transmit and receive requests to or from the remote agent, respectively. 5.3.1.2 Data Alignment 5.3.1.2.1 4 KB Boundary PCI requests must never specify an address/length combination that causes a memory space access to cross a 4 KB boundary. It is hardware's responsibility to break requests into 4 KB-aligned requests (if needed). This does not pose any requirement on software. However, if software allocates a buffer across a 4 KB boundary, hardware issues multiple requests for the buffer. Software should consider aligning buffers to a 4 KB boundary in cases where it improves performance. The alignment to the 4 KB boundaries is done in the core. The transaction layer does not do any alignment according to these boundaries. 5.3.1.2.2 64 Bytes PCI requests are multiples of 64 bytes and aligned to make better use of memory controller resources. Writes, however, can be on any boundary and can cross a 64-byte alignment boundary. 5.3.1.3 Configuration Request Retry Status The integrated GbE controller might have a delay in initialization due to an NVM read. If the NVM configuration read operation is not completed and the device receives a configuration request, the device responds with a configuration request retry completion status to terminate the request, and thus effectively stalls the configuration request until such time that the sub-system has completed local initialization and is ready to communicate with the host. 134 Datasheet Functional Description 5.3.2 Error Events and Error Reporting 5.3.2.1 Data Parity Error The PCI host bus does not provide parity protection, but it does forward parity errors from bridges. The integrated GbE controller recognizes parity errors through the internal bus interface and sets the Parity Error bit in PCI configuration space. If parity errors are enabled in configuration space, a system error is indicated on the PCI host bus. The offending cycle with a parity error is dropped and not processed by the integrated GbE controller. 5.3.2.2 Completion with Unsuccessful Completion Status A completion with unsuccessful completion status (any status other than 000) is dropped and not processed by the integrated GbE controller. Furthermore, the request that corresponds to the unsuccessful completion is not retried. When this unsuccessful completion status is received, the System Error bit in the PCI configuration space is set. If the system errors are enabled in configuration space, a system error is indicated on the PCI host bus. 5.3.3 Ethernet Interface The integrated GbE controller provides a complete CSMA/CD function supporting IEEE 802.3 (10 Mb/s), 802.3u (100 Mb/s) implementations. It also supports the IEEE 802.3z and 802.3ab (1000 Mb/s) implementations. The device performs all of the functions required for transmission, reception, and collision handling called out in the standards. The mode used to communicate between the PCH and the 82577/82578 PHY supports 10/100/1000 Mb/s operation, with both half- and full-duplex operation at 10/100 Mb/s, and full-duplex operation at 1000 Mb/s. 5.3.3.1 Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset 82577/82578 PHY Interface The integrated GbE controller and the 82577/82578 PHY communicate through the PCIe and SMBus interfaces. All integrated GbE controller configuration is performed using device control registers mapped into system memory or I/O space. The 82577/ 82578 is configured using the PCI Express or SMBus interface. The integrated GbE controller supports various modes as listed in Table 5-4. Table 5-4. LAN Mode Support Mode System State Interface Active Connections Normal 10/100/1000 Mb/s S0 PCI Express or SMBus1 82577/82578 Manageability and Remote Wake-up Sx SMBus 82577/82578 NOTES: 1. GbE operation is not supported in Sx states. Datasheet 135 Functional Description 5.3.4 PCI Power Management The integrated GbE controller supports the Advanced Configuration and Power Interface (ACPI) specification as well as Advanced Power Management (APM). This enables the network-related activity (using an internal host wake signal) to wake up the host. For example, from Sx (S3-S5) to S0. The integrated GbE controller contains power management registers for PCI and supports D0 and D3 states. PCIe transactions are only allowed in the D0 state, except for host accesses to the integrated GbE controller's PCI configuration registers. 5.3.4.1 Wake Up The integrated GbE controller supports two types of wake-up mechanisms: 1. Advanced Power Management (APM) Wake Up 2. ACPI Power Management Wake Up Both mechanisms use an internal logic signal to wake the system up. The wake-up steps are as follows: 1. Host wake event occurs (note that packet is not delivered to host). 2. The 82577/82578 receives a WoL packet/link status change. 3. The 82577/82578 wakes up the integrated GbE controller using an SMBus message. 4. The integrated GbE controller sets the PME_STATUS bit. 5. System wakes from Sx state to S0 state. 6. The host LAN function is transitioned to D0. 7. The host clears the PME_STATUS bit. 5.3.4.1.1 Advanced Power Management Wake Up Advanced Power Management Wake Up or APM Wake Up was previously known as Wake on LAN (WoL). It is a feature that has existed in the 10/100 Mb/s NICs for several generations. The basic premise is to receive a broadcast or unicast packet with an explicit data pattern and then to assert a signal to wake up the system. In earlier generations, this was accomplished by using a special signal that ran across a cable to a defined connector on the motherboard. The NIC would assert the signal for approximately 50 ms to signal a wake up. The integrated GbE controller uses (if configured to) an in-band PM_PME message for this. At power up, the integrated GbE controller reads the APM Enable bits from the NVM PCI Init Control Word into the APM Enable (APME) bits of the Wake Up Control (WUC) register. These bits control enabling of APM wake up. When APM wake up is enabled, the integrated GbE controller checks all incoming packets for Magic Packets*. Once the integrated GbE controller receives a matching Magic Packet*, it: * Sets the Magic Packet* Received bit in the Wake Up Status (WUS) register. * Sets the PME_Status bit in the Power Management Control/Status Register (PMCSR). APM wake up is supported in all power states and only disabled if a subsequent NVM read results in the APM Wake Up bit being cleared or the software explicitly writes a 0b to the APM Wake Up (APM) bit of the WUC register. 136 Datasheet Functional Description Note: APM wake up settings will be restored to NVM default by the PCH when LAN connected Device (PHY) power is turned off and subsequently restored. Some example host WOL flows are: 1. When system transitions to G3 after WOL is disabled from the BIOS, APM host WOL would get enabled. 2. Anytime power to the LAN Connected Device (PHY) is cycled while in S4/S5 after WOL is disabled from the BIOS, APM host WOL would get enabled. Anytime power to the LAN Connected Device (PHY) is cycled while in S3, APM host WOL configuration is lost. 5.3.4.1.2 ACPI Power Management Wake Up The integrated GbE controller supports ACPI Power Management based Wake ups. It can generate system wake-up events from three sources: * Receiving a Magic Packet*. * Receiving a Network Wake Up Packet. * Detecting a link change of state. Activating ACPI Power Management Wakeup requires the following steps: * The software device driver programs the Wake Up Filter Control (WUFC) register to indicate the packets it needs to wake up from and supplies the necessary data to the IPv4 Address Table (IP4AT) and the Flexible Filter Mask Table (FFMT), Flexible Filter Length Table (FFLT), and the Flexible Filter Value Table (FFVT). It can also set the Link Status Change Wake Up Enable (LNKC) bit in the Wake Up Filter Control (WUFC) register to cause wake up when the link changes state. * The operating system (at configuration time) writes a 1b to the PME_EN bit of the Power Management Control/Status Register (PMCSR.8). Normally, after enabling wake up, the operating system writes a 11b to the lower two bits of the PMCSR to put the integrated GbE controller into low-power mode. Once wake up is enabled, the integrated GbE controller monitors incoming packets, first filtering them according to its standard address filtering method, then filtering them with all of the enabled wake-up filters. If a packet passes both the standard address filtering and at least one of the enabled wake-up filters, the integrated GbE controller: * Sets the PME_Status bit in the PMCSR * Sets one or more of the Received bits in the Wake Up Status (WUS) register. (More than one bit is set if a packet matches more than one filter.) If enabled, a link state change wake up causes similar results, setting the Link Status Changed (LNKC) bit in the Wake Up Status (WUS) register when the link goes up or down. After receiving a wake-up packet, the integrated GbE controller ignores any subsequent wake-up packets until the software device driver clears all of the Received bits in the Wake Up Status (WUS) register. It also ignores link change events until the software device driver clears the Link Status Changed (LNKC) bit in the Wake Up Status (WUS) register. Note: ACPI wake up settings are not preserved when the LAN Connected Device (PHY) power is turned off and subsequently restored. Some example host WOL flows are: 1. Anytime power to the LAN Connected Device (PHY) is cycled while in S3 or S4, ACPI host WOL configuration is lost. Datasheet 137 Functional Description 5.3.5 Configurable LEDs The integrated GbE controller supports three controllable and configurable LEDs that are driven from the 82577/82578. Each of the three LED outputs can be individually configured to select the particular event, state, or activity, which is indicated on that output. In addition, each LED can be individually configured for output polarity as well as for blinking versus non-blinking (steady-state) indication. The configuration for LED outputs is specified using the LEDCTL register. Furthermore, the hardware-default configuration for all the LED outputs, can be specified using NVM fields, thereby supporting LED displays configurable to a particular OEM preference. Each of the three LEDs might be configured to use one of a variety of sources for output indication. The MODE bits control the LED source: * LINK_100/1000 is asserted when link is established at either 100 or 1000 Mb/s. * LINK_10/1000 is asserted when link is established at either 10 or 1000 Mb/s. * LINK_UP is asserted when any speed link is established and maintained. * ACTIVITY is asserted when link is established and packets are being transmitted or received. * LINK/ACTIVITY is asserted when link is established AND there is NO transmit or receive activity * LINK_10 is asserted when a 10 Mb/ps link is established and maintained. * LINK_100 is asserted when a 100 Mb/s link is established and maintained. * LINK_1000 is asserted when a 1000 Mb/s link is established and maintained. * FULL_DUPLEX is asserted when the link is configured for full duplex operation. * COLLISION is asserted when a collision is observed. * PAUSED is asserted when the device's transmitter is flow controlled. * LED_ON is always asserted; LED_OFF is always de-asserted. The IVRT bits enable the LED source to be inverted before being output or observed by the blink-control logic. LED outputs are assumed to normally be connected to the negative side (cathode) of an external LED. The BLINK bits control whether the LED should be blinked while the LED source is asserted, and the blinking frequency (either 200 ms on and 200 ms off or 83 ms on and 83 ms off). The blink control can be especially useful for ensuring that certain events, such as ACTIVITY indication, cause LED transitions, which are sufficiently visible to a human eye. The same blinking rate is shared by all LEDs. 5.3.6 Function Level Reset Support (FLR) The integrated GbE controller supports FLR capability. FLR capability can be used in conjunction with Intel(R) Virtualization Technology. FLR allows an operating system in a Virtual Machine to have complete control over a device, including its initialization, without interfering with the rest of the platform. The device provides a software interface that enables the operating system to reset the entire device as if a PCI reset was asserted. 138 Datasheet Functional Description 5.3.6.1 FLR Steps 5.3.6.1.1 FLR Initialization 1. FLR is initiated by software by writing a 1b to the Initiate FLR bit. 2. All subsequent requests targeting the function is not claimed and will be master abort immediate on the bus. This includes any configuration, I/O or memory cycles, however, the function must continue to accept completions targeting the function. 5.3.6.1.2 FLR Operation Function resets all configuration, I/O and memory registers of the function except those indicated otherwise and resets all internal states of the function to the default or initial condition. 5.3.6.1.3 FLR Completion The Initiate FLR bit is reset (cleared) when the FLR reset completes. This bit can be used to indicate to the software that the FLR reset completed. Note: From the time the Initiate FLR bit is written to 1b, software must wait at least 100 ms before accessing the function. 5.4 LPC Bridge (with System and Management Functions) (D31:F0) The LPC bridge function of the PCH resides in PCI Device 31:Function 0. In addition to the LPC bridge function, D31:F0 contains other functional units including DMA, Interrupt controllers, Timers, Power Management, System Management, GPIO, and RTC. In this chapter, registers and functions associated with other functional units (power management, GPIO, USB, etc.) are described in their respective sections. Note: The LPC bridge cannot be configured as a subtractive decode agent. 5.4.1 LPC Interface The PCH implements an LPC interface as described in the Low Pin Count Interface Specification, Revision 1.1. The LPC interface to the PCH is shown in Figure 5-2. Note that the PCH implements all of the signals that are shown as optional, but peripherals are not required to do so. Datasheet 139 Functional Description Figure 5-2. LPC Interface Diagram PCI Bus PCI CLK PCI SERIRQ PCI PME# LAD [3:0] PCH LFRAME# SUS_STAT# LDRQ[1:0]# (Optional) LPCPD# (Optional) GPI 5.4.1.1 PCI RST# LPC Device LSMI# (Optional) LPC Cycle Types The PCH implements all of the cycle types described in the Low Pin Count Interface Specification, Revision 1.1. Table 5-5 shows the cycle types supported by the PCH. Table 5-5. LPC Cycle Types Supported Cycle Type Comment Memory Read 1 byte only. (See Note 1 below) Memory Write 1 byte only. (See Note 1 below) I/O Read 1 byte only. The PCH breaks up 16- and 32-bit processor cycles into multiple 8-bit transfers. I/O Write 1 byte only. The PCH breaks up 16- and 32-bit processor cycles into multiple 8-bit transfers. DMA Read Can be 1, or 2 bytes DMA Write Can be 1, or 2 bytes Bus Master Read Can be 1, 2, or 4 bytes. (See Note 2 below) Bus Master Write Can be 1, 2, or 4 bytes. (See Note 2 below) NOTES: 1. The PCH provides a single generic memory range (LGMR) for decoding memory cycles and forwarding them as LPC Memory cycles on the LPC bus. The LGMR memory decode range is 64 KB in size and can be defined as being anywhere in the 4 GB memory space. This range needs to be configured by BIOS during POST to provide the necessary memory resources. BIOS should advertise the LPC Generic Memory Range as Reserved to the OS to avoid resource conflict. For larger transfers, the PCH performs multiple 8-bit transfers. If the cycle is not claimed by any peripheral, it is subsequently aborted, and the PCH returns a value of all 1s to the processor. This is done to maintain compatibility with ISA memory cycles where pull-up resistors would keep the bus high if no device responds. 2. Bus Master Read or Write cycles must be naturally aligned. For example, a 1-byte transfer can be to any address. However, the 2-byte transfer must be word-aligned (that is, with an address where A0=0). A DWord transfer must be DWord-aligned (that is, with an address where A1 and A0 are both 0). 140 Datasheet Functional Description 5.4.1.2 Start Field Definition Table 5-6. Start Field Bit Definitions Bits[3:0] Encoding Definition 0000 Start of cycle for a generic target 0010 Grant for bus master 0 0011 Grant for bus master 1 1111 Stop/Abort: End of a cycle for a target. NOTE: All other encodings are RESERVED. 5.4.1.3 Cycle Type / Direction (CYCTYPE + DIR) The PCH always drives bit 0 of this field to 0. Peripherals running bus master cycles must also drive bit 0 to 0. Table 5-7 shows the valid bit encodings. Table 5-7. 5.4.1.4 Cycle Type Bit Definitions Bits[3:2] Bit1 Definition 00 0 I/O Read 00 1 I/O Write 01 0 Memory Read 01 1 Memory Read 10 0 DMA Read 10 1 DMA Write 11 x Reserved. If a peripheral performing a bus master cycle generates this value, the PCH aborts the cycle. Size Bits[3:2] are reserved. The PCH always drives them to 00. Peripherals running bus master cycles are also supposed to drive 00 for bits 3:2; however, the PCH ignores those bits. Bits[1:0] are encoded as listed in Table 5-8. Table 5-8. Transfer Size Bit Definition Bits[1:0] Datasheet Size 00 8-bit transfer (1 byte) 01 16-bit transfer (2 bytes) 10 Reserved. The PCH never drives this combination. If a peripheral running a bus master cycle drives this combination, the PCH may abort the transfer. 11 32-bit transfer (4 bytes) 141 Functional Description 5.4.1.5 SYNC Valid values for the SYNC field are shown in Table 5-9. Table 5-9. SYNC Bit Definition Bits[3:0] Indication 0000 Ready: SYNC achieved with no error. For DMA transfers, this also indicates DMA request de-assertion and no more transfers desired for that channel. 0101 Short Wait: Part indicating wait-states. For bus master cycles, the PCH does not use this encoding. Instead, the PCH uses the Long Wait encoding (see next encoding below). 0110 Long Wait: Part indicating wait-states, and many wait-states will be added. This encoding driven by the PCH for bus master cycles, rather than the Short Wait (0101). 1001 Ready More (Used only by peripheral for DMA cycle): SYNC achieved with no error and more DMA transfers desired to continue after this transfer. This value is valid only on DMA transfers and is not allowed for any other type of cycle. 1010 Error: Sync achieved with error. This is generally used to replace the SERR# or IOCHK# signal on the PCI/ISA bus. It indicates that the data is to be transferred, but there is a serious error in this transfer. For DMA transfers, this not only indicates an error, but also indicates DMA request de-assertion and no more transfers desired for that channel. NOTES: 1. All other combinations are RESERVED. 2. If the LPC controller receives any SYNC returned from the device other than short (0101), long wait (0110), or ready (0000) when running a FWH cycle, indeterminate results may occur. A FWH device is not allowed to assert an Error SYNC. 5.4.1.6 SYNC Time-Out There are several error cases that can occur on the LPC interface. The PCH responds as defined in section 4.2.1.9 of the Low Pin Count Interface Specification, Revision 1.1 to the stimuli described therein. There may be other peripheral failure conditions; however, these are not handled by the PCH. 5.4.1.7 SYNC Error Indication The PCH responds as defined in section 4.2.1.10 of the Low Pin Count Interface Specification, Revision 1.1. Upon recognizing the SYNC field indicating an error, the PCH treats this as a SERR by reporting this into the Device 31 Error Reporting Logic. 5.4.1.8 LFRAME# Usage The PCH follows the usage of LFRAME# as defined in the Low Pin Count Interface Specification, Revision 1.1. The PCH performs an abort for the following cases (possible failure cases): * The PCH starts a Memory, I/O, or DMA cycle, but no device drives a valid SYNC after four consecutive clocks. * The PCH starts a Memory, I/O, or DMA cycle, and the peripheral drives an invalid SYNC pattern. * A peripheral drives an illegal address when performing bus master cycles. * A peripheral drives an invalid value. 142 Datasheet Functional Description 5.4.1.9 I/O Cycles For I/O cycles targeting registers specified in the PCH decode ranges, the PCH performs I/O cycles as defined in the Low Pin Count Interface Specification, Revision 1.1. These are 8-bit transfers. If the processor attempts a 16-bit or 32-bit transfer, the PCH breaks the cycle up into multiple 8-bit transfers to consecutive I/O addresses. Note: If the cycle is not claimed by any peripheral (and subsequently aborted), the PCH returns a value of all 1s (FFh) to the processor. This is to maintain compatibility with ISA I/O cycles where pull-up resistors would keep the bus high if no device responds. 5.4.1.10 Bus Master Cycles The PCH supports Bus Master cycles and requests (using LDRQ#) as defined in the Low Pin Count Interface Specification, Revision 1.1. The PCH has two LDRQ# inputs, and thus supports two separate bus master devices. It uses the associated START fields for Bus Master 0 (0010b) or Bus Master 1 (0011b). Note: The PCH does not support LPC Bus Masters performing I/O cycles. LPC Bus Masters should only perform memory read or memory write cycles. 5.4.1.11 LPC Power Management LPCPD# Protocol Same timings as for SUS_STAT#. Upon driving SUS_STAT# low, LPC peripherals drive LDRQ# low or tri-state it. The PCH shuts off the LDRQ# input buffers. After driving SUS_STAT# active, the PCH drives LFRAME# low, and tri-states (or drive low) LAD[3:0]. Note: The Low Pin Count Interface Specification, Revision 1.1 defines the LPCPD# protocol where there is at least 30 s from LPCPD# assertion to LRST# assertion. This specification explicitly states that this protocol only applies to entry/exit of low power states which does not include asynchronous reset events. The PCH asserts both SUS_STAT# (connects to LPCPD#) and PLTRST# (connects to LRST#) at the same time during a global reset. This is not inconsistent with the LPC LPCPD# protocol. 5.4.1.12 Configuration and PCH Implications LPC I/F Decoders To allow the I/O cycles and memory mapped cycles to go to the LPC interface, the PCH includes several decoders. During configuration, the PCH must be programmed with the same decode ranges as the peripheral. The decoders are programmed using the Device 31:Function 0 configuration space. Note: The PCH cannot accept PCI write cycles from PCI-to-PCI bridges or devices with similar characteristics (specifically those with a "Retry Read" feature which is enabled) to an LPC device if there is an outstanding LPC read cycle towards the same PCI device or bridge. These cycles are not part of normal system operation, but may be encountered as part of platform validation testing using custom test fixtures. Bus Master Device Mapping and START Fields Bus Masters must have a unique START field. In the case of the PCH that supports two LPC bus masters, it drives 0010 for the START field for grants to bus master 0 (requested using LDRQ0#) and 0011 for grants to bus master #1 (requested using LDRQ1#.). Thus, no registers are needed to configure the START fields for a particular bus master. Datasheet 143 Functional Description 5.5 DMA Operation (D31:F0) The PCH supports LPC DMA using the PCH's DMA controller. The DMA controller has registers that are fixed in the lower 64 KB of I/O space. The DMA controller is configured using registers in the PCI configuration space. These registers allow configuration of the channels for use by LPC DMA. The DMA circuitry incorporates the functionality of two 8237 DMA controllers with seven independently programmable channels (Figure 5-3). DMA controller 1 (DMA-1) corresponds to DMA channels 0-3 and DMA controller 2 (DMA-2) corresponds to channels 5-7. DMA channel 4 is used to cascade the two controllers and defaults to cascade mode in the DMA Channel Mode (DCM) Register. Channel 4 is not available for any other purpose. In addition to accepting requests from DMA slaves, the DMA controller also responds to requests that software initiates. Software may initiate a DMA service request by setting any bit in the DMA Channel Request Register to a 1. Figure 5-3. PCH DMA Controller Channel 4 Channel 0 Channel 1 Channel 5 DMA-1 Channel 2 Channel 6 Channel 3 Channel 7 DMA-2 Each DMA channel is hardwired to the compatible settings for DMA device size: channels [3:0] are hardwired to 8-bit, count-by-bytes transfers, and channels [7:5] are hardwired to 16-bit, count-by-words (address shifted) transfers. The PCH provides 24-bit addressing in compliance with the ISA-Compatible specification. Each channel includes a 16-bit ISA-Compatible Current Register which holds the 16 least-significant bits of the 24-bit address, an ISA-Compatible Page Register which contains the eight next most significant bits of address. The DMA controller also features refresh address generation, and auto-initialization following a DMA termination. 5.5.1 Channel Priority For priority resolution, the DMA consists of two logical channel groups: channels 0-3 and channels 4-7. Each group may be in either fixed or rotate mode, as determined by the DMA Command Register. DMA I/O slaves normally assert their DREQ line to arbitrate for DMA service. However, a software request for DMA service can be presented through each channel's DMA Request Register. A software request is subject to the same prioritization as any hardware request. See the detailed register description for Request Register programming information in Section 13.2. 5.5.1.1 Fixed Priority The initial fixed priority structure is as follows: High priority Low priority 0, 1, 2, 3 5, 6, 7 The fixed priority ordering is 0, 1, 2, 3, 5, 6, and 7. In this scheme, channel 0 has the highest priority, and channel 7 has the lowest priority. Channels [3:0] of DMA-1 assume the priority position of channel 4 in DMA-2, thus taking priority over channels 5, 6, and 7. 144 Datasheet Functional Description 5.5.1.2 Rotating Priority Rotation allows for "fairness" in priority resolution. The priority chain rotates so that the last channel serviced is assigned the lowest priority in the channel group (0-3, 5-7). Channels 0-3 rotate as a group of 4. They are always placed between channel 5 and channel 7 in the priority list. Channel 5-7 rotate as part of a group of 4. That is, channels (5-7) form the first three positions in the rotation, while channel group (0-3) comprises the fourth position in the arbitration. 5.5.2 Address Compatibility Mode When the DMA is operating, the addresses do not increment or decrement through the High and Low Page Registers. Therefore, if a 24-bit address is 01FFFFh and increments, the next address is 010000h, not 020000h. Similarly, if a 24-bit address is 020000h and decrements, the next address is 02FFFFh, not 01FFFFh. However, when the DMA is operating in 16-bit mode, the addresses still do not increment or decrement through the High and Low Page Registers but the page boundary is now 128 K. Therefore, if a 24-bit address is 01FFFEh and increments, the next address is 000000h, not 0100000h. Similarly, if a 24-bit address is 020000h and decrements, the next address is 03FFFEh, not 02FFFEh. This is compatible with the 8237 and Page Register implementation used in the PC-AT. This mode is set after CPURST is valid. 5.5.3 Summary of DMA Transfer Sizes Table 5-10 lists each of the DMA device transfer sizes. The column labeled "Current Byte/Word Count Register" indicates that the register contents represents either the number of bytes to transfer or the number of 16-bit words to transfer. The column labeled "Current Address Increment/Decrement" indicates the number added to or taken from the Current Address register after each DMA transfer cycle. The DMA Channel Mode Register determines if the Current Address Register will be incremented or decremented. 5.5.3.1 Address Shifting When Programmed for 16-Bit I/O Count by Words Table 5-10. DMA Transfer Size Current Byte/Word Count Register Current Address Increment/ Decrement 8-Bit I/O, Count By Bytes Bytes 1 16-Bit I/O, Count By Words (Address Shifted) Words 1 DMA Device Date Size And Word Count The PCH maintains compatibility with the implementation of the DMA in the PC AT that used the 8237. The DMA shifts the addresses for transfers to/from a 16-bit device count-by-words. Note: Datasheet The least significant bit of the Low Page Register is dropped in 16-bit shifted mode. When programming the Current Address Register (when the DMA channel is in this mode), the Current Address must be programmed to an even address with the address value shifted right by one bit. 145 Functional Description The address shifting is shown in Table 5-11. Table 5-11. Address Shifting in 16-Bit I/O DMA Transfers Output Address 8-Bit I/O Programmed Address (Ch 0-3) 16-Bit I/O Programmed Address (Ch 5-7) (Shifted) A0 A[16:1] A[23:17] A0 A[16:1] A[23:17] 0 A[15:0] A[23:17] NOTE: The least significant bit of the Page Register is dropped in 16-bit shifted mode. 5.5.4 Autoinitialize By programming a bit in the DMA Channel Mode Register, a channel may be set up as an autoinitialize channel. When a channel undergoes autoinitialization, the original values of the Current Page, Current Address and Current Byte/Word Count Registers are automatically restored from the Base Page, Address, and Byte/Word Count Registers of that channel following TC. The Base Registers are loaded simultaneously with the Current Registers by the microprocessor when the DMA channel is programmed and remain unchanged throughout the DMA service. The mask bit is not set when the channel is in autoinitialize. Following autoinitialize, the channel is ready to perform another DMA service, without processor intervention, as soon as a valid DREQ is detected. 5.5.5 Software Commands There are three additional special software commands that the DMA controller can execute. The three software commands are: * Clear Byte Pointer Flip-Flop * Master Clear * Clear Mask Register They do not depend on any specific bit pattern on the data bus. 146 Datasheet Functional Description 5.6 LPC DMA DMA on LPC is handled through the use of the LDRQ# lines from peripherals and special encodings on LAD[3:0] from the host. Single, Demand, Verify, and Increment modes are supported on the LPC interface. Channels 0-3 are 8 bit channels. Channels 5-7 are 16-bit channels. Channel 4 is reserved as a generic bus master request. 5.6.1 Asserting DMA Requests Peripherals that need DMA service encode their requested channel number on the LDRQ# signal. To simplify the protocol, each peripheral on the LPC I/F has its own dedicated LDRQ# signal (they may not be shared between two separate peripherals). The PCH has two LDRQ# inputs, allowing at least two devices to support DMA or bus mastering. LDRQ# is synchronous with LCLK (PCI clock). As shown in Figure 5-4, the peripheral uses the following serial encoding sequence: * Peripheral starts the sequence by asserting LDRQ# low (start bit). LDRQ# is high during idle conditions. * The next three bits contain the encoded DMA channel number (MSB first). * The next bit (ACT) indicates whether the request for the indicated DMA channel is active or inactive. The ACT bit is 1 (high) to indicate if it is active and 0 (low) if it is inactive. The case where ACT is low is rare, and is only used to indicate that a previous request for that channel is being abandoned. * After the active/inactive indication, the LDRQ# signal must go high for at least 1 clock. After that one clock, LDRQ# signal can be brought low to the next encoding sequence. If another DMA channel also needs to request a transfer, another sequence can be sent on LDRQ#. For example, if an encoded request is sent for channel 2, and then channel 3 needs a transfer before the cycle for channel 2 is run on the interface, the peripheral can send the encoded request for channel 3. This allows multiple DMA agents behind an I/O device to request use of the LPC interface, and the I/O device does not need to selfarbitrate before sending the message. Figure 5-4. DMA Request Assertion through LDRQ# LCLK LDRQ# Datasheet Start MSB LSB ACT Start 147 Functional Description 5.6.2 Abandoning DMA Requests DMA Requests can be de-asserted in two fashions: on error conditions by sending an LDRQ# message with the `ACT' bit set to 0, or normally through a SYNC field during the DMA transfer. This section describes boundary conditions where the DMA request needs to be removed prior to a data transfer. There may be some special cases where the peripheral desires to abandon a DMA transfer. The most likely case of this occurring is due to a floppy disk controller which has overrun or underrun its FIFO, or software stopping a device prematurely. In these cases, the peripheral wishes to stop further DMA activity. It may do so by sending an LDRQ# message with the ACT bit as 0. However, since the DMA request was seen by the PCH, there is no assurance that the cycle has not been granted and will shortly run on LPC. Therefore, peripherals must take into account that a DMA cycle may still occur. The peripheral can choose not to respond to this cycle, in which case the host will abort it, or it can choose to complete the cycle normally with any random data. This method of DMA de-assertion should be prevented whenever possible, to limit boundary conditions both on the PCH and the peripheral. 5.6.3 General Flow of DMA Transfers Arbitration for DMA channels is performed through the 8237 within the host. Once the host has won arbitration on behalf of a DMA channel assigned to LPC, it asserts LFRAME# on the LPC I/F and begins the DMA transfer. The general flow for a basic DMA transfer is as follows: 1. The PCH starts transfer by asserting 0000b on LAD[3:0] with LFRAME# asserted. 2. The PCH asserts `cycle type' of DMA, direction based on DMA transfer direction. 3. The PCH asserts channel number and, if applicable, terminal count. 4. The PCH indicates the size of the transfer: 8 or 16 bits. 5. If a DMA read... -- The PCH drives the first 8 bits of data and turns the bus around. -- The peripheral acknowledges the data with a valid SYNC. -- If a 16-bit transfer, the process is repeated for the next 8 bits. 6. If a DMA write... -- The PCH turns the bus around and waits for data. -- The peripheral indicates data ready through SYNC and transfers the first byte. -- If a 16-bit transfer, the peripheral indicates data ready and transfers the next byte. 7. The peripheral turns around the bus. 5.6.4 Terminal Count Terminal count is communicated through LAD[3] on the same clock that DMA channel is communicated on LAD[2:0]. This field is the CHANNEL field. Terminal count indicates the last byte of transfer, based upon the size of the transfer. For example, on an 8-bit transfer size (SIZE field is 00b), if the TC bit is set, then this is the last byte. On a 16-bit transfer (SIZE field is 01b), if the TC bit is set, then the second byte is the last byte. The peripheral, therefore, must internalize the TC bit when the CHANNEL field is communicated, and only signal TC when the last byte of that transfer size has been transferred. 148 Datasheet Functional Description 5.6.5 Verify Mode Verify mode is supported on the LPC interface. A verify transfer to the peripheral is similar to a DMA write, where the peripheral is transferring data to main memory. The indication from the host is the same as a DMA write, so the peripheral will be driving data onto the LPC interface. However, the host will not transfer this data into main memory. 5.6.6 DMA Request De-assertion An end of transfer is communicated to the PCH through a special SYNC field transmitted by the peripheral. An LPC device must not attempt to signal the end of a transfer by de-asserting LDREQ#. If a DMA transfer is several bytes (such as, a transfer from a demand mode device) the PCH needs to know when to de-assert the DMA request based on the data currently being transferred. The DMA agent uses a SYNC encoding on each byte of data being transferred, which indicates to the PCH whether this is the last byte of transfer or if more bytes are requested. To indicate the last byte of transfer, the peripheral uses a SYNC value of 0000b (ready with no error), or 1010b (ready with error). These encodings tell the PCH that this is the last piece of data transferred on a DMA read (PCH to peripheral), or the byte that follows is the last piece of data transferred on a DMA write (peripheral to the PCH). When the PCH sees one of these two encodings, it ends the DMA transfer after this byte and de-asserts the DMA request to the 8237. Therefore, if the PCH indicated a 16-bit transfer, the peripheral can end the transfer after one byte by indicating a SYNC value of 0000b or 1010b. The PCH does not attempt to transfer the second byte, and deasserts the DMA request internally. If the peripheral indicates a 0000b or 1010b SYNC pattern on the last byte of the indicated size, then the PCH only de-asserts the DMA request to the 8237 since it does not need to end the transfer. If the peripheral wishes to keep the DMA request active, then it uses a SYNC value of 1001b (ready plus more data). This tells the 8237 that more data bytes are requested after the current byte has been transferred, so the PCH keeps the DMA request active to the 8237. Therefore, on an 8-bit transfer size, if the peripheral indicates a SYNC value of 1001b to the PCH, the data will be transferred and the DMA request will remain active to the 8237. At a later time, the PCH will then come back with another START-CYCTYPE-CHANNEL-SIZE etc. combination to initiate another transfer to the peripheral. The peripheral must not assume that the next START indication from the PCH is another grant to the peripheral if it had indicated a SYNC value of 1001b. On a single mode DMA device, the 8237 will re-arbitrate after every transfer. Only demand mode DMA devices can be assured that they will receive the next START indication from the PCH. Note: Indicating a 0000b or 1010b encoding on the SYNC field of an odd byte of a 16-bit channel (first byte of a 16-bit transfer) is an error condition. Note: The host stops the transfer on the LPC bus as indicated, fills the upper byte with random data on DMA writes (peripheral to memory), and indicates to the 8237 that the DMA transfer occurred, incrementing the 8237's address and decrementing its byte count. Datasheet 149 Functional Description 5.6.7 SYNC Field / LDRQ# Rules Since DMA transfers on LPC are requested through an LDRQ# assertion message, and are ended through a SYNC field during the DMA transfer, the peripheral must obey the following rule when initiating back-to-back transfers from a DMA channel. The peripheral must not assert another message for eight LCLKs after a de-assertion is indicated through the SYNC field. This is needed to allow the 8237, that typically runs off a much slower internal clock, to see a message de-asserted before it is re-asserted so that it can arbitrate to the next agent. Under default operation, the host only performs 8-bit transfers on 8-bit channels and 16-bit transfers on 16-bit channels. The method by which this communication between host and peripheral through system BIOS is performed is beyond the scope of this specification. Since the LPC host and LPC peripheral are motherboard devices, no "plug-n-play" registry is required. The peripheral must not assume that the host is able to perform transfer sizes that are larger than the size allowed for the DMA channel, and be willing to accept a SIZE field that is smaller than what it may currently have buffered. To that end, it is recommended that future devices that may appear on the LPC bus, that require higher bandwidth than 8-bit or 16-bit DMA allow, do so with a bus mastering interface and not rely on the 8237. 5.7 8254 Timers (D31:F0) The PCH contains three counters that have fixed uses. All registers and functions associated with the 8254 timers are in the core well. The 8254 unit is clocked by a 14.31818 MHz clock. Counter 0, System Timer This counter functions as the system timer by controlling the state of IRQ0 and is typically programmed for Mode 3 operation. The counter produces a square wave with a period equal to the product of the counter period (838 ns) and the initial count value. The counter loads the initial count value 1 counter period after software writes the count value to the counter I/O address. The counter initially asserts IRQ0 and decrements the count value by two each counter period. The counter negates IRQ0 when the count value reaches 0. It then reloads the initial count value and again decrements the initial count value by two each counter period. The counter then asserts IRQ0 when the count value reaches 0, reloads the initial count value, and repeats the cycle, alternately asserting and negating IRQ0. Counter 1, Refresh Request Signal This counter provides the refresh request signal and is typically programmed for Mode 2 operation and only impacts the period of the REF_TOGGLE bit in Port 61. The initial count value is loaded one counter period after being written to the counter I/O address. The REF_TOGGLE bit will have a square wave behavior (alternate between 0 and 1) and will toggle at a rate based on the value in the counter. Programming the counter to anything other than Mode 2 will result in undefined behavior for the REF_TOGGLE bit. Counter 2, Speaker Tone This counter provides the speaker tone and is typically programmed for Mode 3 operation. The counter provides a speaker frequency equal to the counter clock frequency (1.193 MHz) divided by the initial count value. The speaker must be enabled by a write to port 061h (see NMI Status and Control ports). 150 Datasheet Functional Description 5.7.1 Timer Programming The counter/timers are programmed in the following fashion: 1. Write a control word to select a counter. 2. Write an initial count for that counter. 3. Load the least and/or most significant bytes (as required by Control Word bits 5, 4) of the 16-bit counter. 4. Repeat with other counters. Only two conventions need to be observed when programming the counters. First, for each counter, the control word must be written before the initial count is written. Second, the initial count must follow the count format specified in the control word (least significant byte only, most significant byte only, or least significant byte and then most significant byte). A new initial count may be written to a counter at any time without affecting the counter's programmed mode. Counting is affected as described in the mode definitions. The new count must follow the programmed count format. If a counter is programmed to read/write two-byte counts, the following precaution applies: A program must not transfer control between writing the first and second byte to another routine which also writes into that same counter. Otherwise, the counter will be loaded with an incorrect count. The Control Word Register at port 43h controls the operation of all three counters. Several commands are available: * Control Word Command. Specifies which counter to read or write, the operating mode, and the count format (binary or BCD). * Counter Latch Command. Latches the current count so that it can be read by the system. The countdown process continues. * Read Back Command. Reads the count value, programmed mode, the current state of the OUT pins, and the state of the Null Count Flag of the selected counter. Table 5-12 lists the six operating modes for the interval counters. Table 5-12. Counter Operating Modes Mode Datasheet Function Description 0 Out signal on end of count (=0) Output is 0. When count goes to 0, output goes to 1 and stays at 1 until counter is reprogrammed. 1 Hardware retriggerable one-shot Output is 0. When count goes to 0, output goes to 1 for one clock time. 2 Rate generator (divide by n counter) Output is 1. Output goes to 0 for one clock time, then back to 1 and counter is reloaded. 3 Square wave output Output is 1. Output goes to 0 when counter rolls over, and counter is reloaded. Output goes to 1 when counter rolls over, and counter is reloaded, etc. 4 Software triggered strobe Output is 1. Output goes to 0 when count expires for one clock time. 5 Hardware triggered strobe Output is 1. Output goes to 0 when count expires for one clock time. 151 Functional Description 5.7.2 Reading from the Interval Timer It is often desirable to read the value of a counter without disturbing the count in progress. There are three methods for reading the counters: a simple read operation, counter Latch command, and the Read-Back command. Each is explained below. With the simple read and counter latch command methods, the count must be read according to the programmed format; specifically, if the counter is programmed for two byte counts, two bytes must be read. The two bytes do not have to be read one right after the other. Read, write, or programming operations for other counters may be inserted between them. 5.7.2.1 Simple Read The first method is to perform a simple read operation. The counter is selected through port 40h (counter 0), 41h (counter 1), or 42h (counter 2). Note: Performing a direct read from the counter does not return a determinate value, because the counting process is asynchronous to read operations. However, in the case of counter 2, the count can be stopped by writing to the GATE bit in port 61h. 5.7.2.2 Counter Latch Command The Counter Latch command, written to port 43h, latches the count of a specific counter at the time the command is received. This command is used to ensure that the count read from the counter is accurate, particularly when reading a two-byte count. The count value is then read from each counter's Count register as was programmed by the Control register. The count is held in the latch until it is read or the counter is reprogrammed. The count is then unlatched. This allows reading the contents of the counters on the fly without affecting counting in progress. Multiple Counter Latch Commands may be used to latch more than one counter. Counter Latch commands do not affect the programmed mode of the counter in any way. If a Counter is latched and then, some time later, latched again before the count is read, the second Counter Latch command is ignored. The count read is the count at the time the first Counter Latch command was issued. 5.7.2.3 Read Back Command The Read Back command, written to port 43h, latches the count value, programmed mode, and current states of the OUT pin and Null Count flag of the selected counter or counters. The value of the counter and its status may then be read by I/O access to the counter address. The Read Back command may be used to latch multiple counter outputs at one time. This single command is functionally equivalent to several counter latch commands, one for each counter latched. Each counter's latched count is held until it is read or reprogrammed. Once read, a counter is unlatched. The other counters remain latched until they are read. If multiple count Read Back commands are issued to the same counter without reading the count, all but the first are ignored. The Read Back command may additionally be used to latch status information of selected counters. The status of a counter is accessed by a read from that counter's I/O port address. If multiple counter status latch operations are performed without reading the status, all but the first are ignored. 152 Datasheet Functional Description Both count and status of the selected counters may be latched simultaneously. This is functionally the same as issuing two consecutive, separate Read Back commands. If multiple count and/or status Read Back commands are issued to the same counters without any intervening reads, all but the first are ignored. If both count and status of a counter are latched, the first read operation from that counter returns the latched status, regardless of which was latched first. The next one or two reads, depending on whether the counter is programmed for one or two type counts, returns the latched count. Subsequent reads return unlatched count. 5.8 8259 Interrupt Controllers (PIC) (D31:F0) The PCH incorporates the functionality of two 8259 interrupt controllers that provide system interrupts for the ISA compatible interrupts. These interrupts are: system timer, keyboard controller, serial ports, parallel ports, floppy disk, mouse, and DMA channels. In addition, this interrupt controller can support the PCI based interrupts, by mapping the PCI interrupt onto the compatible ISA interrupt line. Each 8259 core supports eight interrupts, numbered 0-7. Table 5-13 shows how the cores are connected. Table 5-13. Interrupt Controller Core Connections . 8259 Master Slave 8259 Input Typical Interrupt Source Connected Pin / Function 0 Internal Internal Timer / Counter 0 output / HPET #0 1 Keyboard IRQ1 via SERIRQ 2 Internal Slave controller INTR output 3 Serial Port A IRQ3 via SERIRQ, PIRQ# 4 Serial Port B IRQ4 via SERIRQ, PIRQ# 5 Parallel Port / Generic IRQ5 via SERIRQ, PIRQ# 6 Floppy Disk IRQ6 via SERIRQ, PIRQ# 7 Parallel Port / Generic IRQ7 via SERIRQ, PIRQ# 0 Internal Real Time Clock Internal RTC / HPET #1 1 Generic IRQ9 via SERIRQ, SCI, TCO, or PIRQ# 2 Generic IRQ10 via SERIRQ, SCI, TCO, or PIRQ# 3 Generic IRQ11 via SERIRQ, SCI, TCO, or PIRQ#, or HPET #2 4 PS/2 Mouse IRQ12 via SERIRQ, SCI, TCO, or PIRQ#, or HPET #3 5 Internal State Machine output based on processor FERR# assertion. May optionally be used for SCI or TCO interrupt if FERR# not needed. 6 SATA SATA Primary (legacy mode), or via SERIRQ or PIRQ# 7 SATA SATA Secondary (legacy mode) or via SERIRQ or PIRQ# The PCH cascades the slave controller onto the master controller through master controller interrupt input 2. This means there are only 15 possible interrupts for the PCH PIC. Datasheet 153 Functional Description Interrupts can individually be programmed to be edge or level, except for IRQ0, IRQ2, IRQ8#, and IRQ13. Note: Active-low interrupt sources (such as, the PIRQ#s) are inverted inside the PCH. In the following descriptions of the 8259s, the interrupt levels are in reference to the signals at the internal interface of the 8259s, after the required inversions have occurred. Therefore, the term "high" indicates "active," which means "low" on an originating PIRQ#. 5.8.1 Interrupt Handling 5.8.1.1 Generating Interrupts The PIC interrupt sequence involves three bits, from the IRR, ISR, and IMR, for each interrupt level. These bits are used to determine the interrupt vector returned, and status of any other pending interrupts. Table 5-14 defines the IRR, ISR, and IMR. Table 5-14. Interrupt Status Registers 5.8.1.2 Bit Description IRR Interrupt Request Register. This bit is set on a low to high transition of the interrupt line in edge mode, and by an active high level in level mode. This bit is set whether or not the interrupt is masked. However, a masked interrupt will not generate INTR. ISR Interrupt Service Register. This bit is set, and the corresponding IRR bit cleared, when an interrupt acknowledge cycle is seen, and the vector returned is for that interrupt. IMR Interrupt Mask Register. This bit determines whether an interrupt is masked. Masked interrupts will not generate INTR. Acknowledging Interrupts The processor generates an interrupt acknowledge cycle that is translated by the host bridge into a PCI Interrupt Acknowledge Cycle to the PCH. The PIC translates this command into two internal INTA# pulses expected by the 8259 cores. The PIC uses the first internal INTA# pulse to freeze the state of the interrupts for priority resolution. On the second INTA# pulse, the master or slave sends the interrupt vector to the processor with the acknowledged interrupt code. This code is based upon bits [7:3] of the corresponding ICW2 register, combined with three bits representing the interrupt within that controller. Table 5-15. Content of Interrupt Vector Byte Master, Slave Interrupt Bits [2:0] IRQ7,15 111 IRQ6,14 110 IRQ5,13 101 IRQ4,12 IRQ3,11 154 Bits [7:3] ICW2[7:3] 100 011 IRQ2,10 010 IRQ1,9 001 IRQ0,8 000 Datasheet Functional Description 5.8.1.3 Hardware/Software Interrupt Sequence 1. One or more of the Interrupt Request lines (IRQ) are raised high in edge mode, or seen high in level mode, setting the corresponding IRR bit. 2. The PIC sends INTR active to the processor if an asserted interrupt is not masked. 3. The processor acknowledges the INTR and responds with an interrupt acknowledge cycle. The cycle is translated into a PCI interrupt acknowledge cycle by the host bridge. This command is broadcast over PCI by the PCH. 4. Upon observing its own interrupt acknowledge cycle on PCI, the PCH converts it into the two cycles that the internal 8259 pair can respond to. Each cycle appears as an interrupt acknowledge pulse on the internal INTA# pin of the cascaded interrupt controllers. 5. Upon receiving the first internally generated INTA# pulse, the highest priority ISR bit is set and the corresponding IRR bit is reset. On the trailing edge of the first pulse, a slave identification code is broadcast by the master to the slave on a private, internal three bit wide bus. The slave controller uses these bits to determine if it must respond with an interrupt vector during the second INTA# pulse. 6. Upon receiving the second internally generated INTA# pulse, the PIC returns the interrupt vector. If no interrupt request is present because the request was too short in duration, the PIC returns vector 7 from the master controller. 7. This completes the interrupt cycle. In AEOI mode the ISR bit is reset at the end of the second INTA# pulse. Otherwise, the ISR bit remains set until an appropriate EOI command is issued at the end of the interrupt subroutine. 5.8.2 Initialization Command Words (ICWx) Before operation can begin, each 8259 must be initialized. In the PCH, this is a four byte sequence. The four initialization command words are referred to by their acronyms: ICW1, ICW2, ICW3, and ICW4. The base address for each 8259 initialization command word is a fixed location in the I/O memory space: 20h for the master controller, and A0h for the slave controller. 5.8.2.1 ICW1 An I/O write to the master or slave controller base address with data bit 4 equal to 1 is interpreted as a write to ICW1. Upon sensing this write, the PCH's PIC expects three more byte writes to 21h for the master controller, or A1h for the slave controller, to complete the ICW sequence. A write to ICW1 starts the initialization sequence during which the following automatically occur: 1. Following initialization, an interrupt request (IRQ) input must make a low-to-high transition to generate an interrupt. 2. The Interrupt Mask Register is cleared. 3. IRQ7 input is assigned priority 7. 4. The slave mode address is set to 7. 5. Special mask mode is cleared and Status Read is set to IRR. Datasheet 155 Functional Description 5.8.2.2 ICW2 The second write in the sequence (ICW2) is programmed to provide bits [7:3] of the interrupt vector that will be released during an interrupt acknowledge. A different base is selected for each interrupt controller. 5.8.2.3 ICW3 The third write in the sequence (ICW3) has a different meaning for each controller. * For the master controller, ICW3 is used to indicate which IRQ input line is used to cascade the slave controller. Within the PCH, IRQ2 is used. Therefore, bit 2 of ICW3 on the master controller is set to a 1, and the other bits are set to 0s. * For the slave controller, ICW3 is the slave identification code used during an interrupt acknowledge cycle. On interrupt acknowledge cycles, the master controller broadcasts a code to the slave controller if the cascaded interrupt won arbitration on the master controller. The slave controller compares this identification code to the value stored in its ICW3, and if it matches, the slave controller assumes responsibility for broadcasting the interrupt vector. 5.8.2.4 ICW4 The final write in the sequence (ICW4) must be programmed for both controllers. At the very least, bit 0 must be set to a 1 to indicate that the controllers are operating in an Intel Architecture-based system. 5.8.3 Operation Command Words (OCW) These command words reprogram the Interrupt controller to operate in various interrupt modes. * OCW1 masks and unmasks interrupt lines. * OCW2 controls the rotation of interrupt priorities when in rotating priority mode, and controls the EOI function. * OCW3 sets up ISR/IRR reads, enables/disables the special mask mode (SMM), and enables/disables polled interrupt mode. 5.8.4 Modes of Operation 5.8.4.1 Fully Nested Mode In this mode, interrupt requests are ordered in priority from 0 through 7, with 0 being the highest. When an interrupt is acknowledged, the highest priority request is determined and its vector placed on the bus. Additionally, the ISR for the interrupt is set. This ISR bit remains set until: the processor issues an EOI command immediately before returning from the service routine; or if in AEOI mode, on the trailing edge of the second INTA#. While the ISR bit is set, all further interrupts of the same or lower priority are inhibited, while higher levels generate another interrupt. Interrupt priorities can be changed in the rotating priority mode. 156 Datasheet Functional Description 5.8.4.2 Special Fully-Nested Mode This mode is used in the case of a system where cascading is used, and the priority has to be conserved within each slave. In this case, the special fully-nested mode is programmed to the master controller. This mode is similar to the fully-nested mode with the following exceptions: * When an interrupt request from a certain slave is in service, this slave is not locked out from the master's priority logic and further interrupt requests from higher priority interrupts within the slave are recognized by the master and initiate interrupts to the processor. In the normal-nested mode, a slave is masked out when its request is in service. * When exiting the Interrupt Service routine, software has to check whether the interrupt serviced was the only one from that slave. This is done by sending a NonSpecific EOI command to the slave and then reading its ISR. If it is 0, a nonspecific EOI can also be sent to the master. 5.8.4.3 Automatic Rotation Mode (Equal Priority Devices) In some applications, there are a number of interrupting devices of equal priority. Automatic rotation mode provides for a sequential 8-way rotation. In this mode, a device receives the lowest priority after being serviced. In the worst case, a device requesting an interrupt has to wait until each of seven other devices are serviced at most once. There are two ways to accomplish automatic rotation using OCW2; the Rotation on Non-Specific EOI Command (R=1, SL=0, EOI=1) and the rotate in automatic EOI mode which is set by (R=1, SL=0, EOI=0). 5.8.4.4 Specific Rotation Mode (Specific Priority) Software can change interrupt priorities by programming the bottom priority. For example, if IRQ5 is programmed as the bottom priority device, then IRQ6 is the highest priority device. The Set Priority Command is issued in OCW2 to accomplish this, where: R=1, SL=1, and LO-L2 is the binary priority level code of the bottom priority device. In this mode, internal status is updated by software control during OCW2. However, it is independent of the EOI command. Priority changes can be executed during an EOI command by using the Rotate on Specific EOI Command in OCW2 (R=1, SL=1, EOI=1 and LO-L2=IRQ level to receive bottom priority. 5.8.4.5 Poll Mode Poll mode can be used to conserve space in the interrupt vector table. Multiple interrupts that can be serviced by one interrupt service routine do not need separate vectors if the service routine uses the poll command. Poll mode can also be used to expand the number of interrupts. The polling interrupt service routine can call the appropriate service routine, instead of providing the interrupt vectors in the vector table. In this mode, the INTR output is not used and the microprocessor internal Interrupt Enable flip-flop is reset, disabling its interrupt input. Service to devices is achieved by software using a Poll command. The Poll command is issued by setting P=1 in OCW3. The PIC treats its next I/O read as an interrupt acknowledge, sets the appropriate ISR bit if there is a request, and reads the priority level. Interrupts are frozen from the OCW3 write to the I/O read. The byte returned during the I/O read contains a 1 in bit 7 if there is an interrupt, and the binary code of the highest priority level in bits 2:0. Datasheet 157 Functional Description 5.8.4.6 Edge and Level Triggered Mode In ISA systems this mode is programmed using bit 3 in ICW1, which sets level or edge for the entire controller. In the PCH, this bit is disabled and a new register for edge and level triggered mode selection, per interrupt input, is included. This is the Edge/Level control Registers ELCR1 and ELCR2. If an ELCR bit is 0, an interrupt request will be recognized by a low-to-high transition on the corresponding IRQ input. The IRQ input can remain high without generating another interrupt. If an ELCR bit is 1, an interrupt request will be recognized by a high level on the corresponding IRQ input and there is no need for an edge detection. The interrupt request must be removed before the EOI command is issued to prevent a second interrupt from occurring. In both the edge and level triggered modes, the IRQ inputs must remain active until after the falling edge of the first internal INTA#. If the IRQ input goes inactive before this time, a default IRQ7 vector is returned. 5.8.4.7 End of Interrupt (EOI) Operations An EOI can occur in one of two fashions: by a command word write issued to the PIC before returning from a service routine, the EOI command; or automatically when AEOI bit in ICW4 is set to 1. 5.8.4.8 Normal End of Interrupt In normal EOI, software writes an EOI command before leaving the interrupt service routine to mark the interrupt as completed. There are two forms of EOI commands: Specific and Non-Specific. When a Non-Specific EOI command is issued, the PIC clears the highest ISR bit of those that are set to 1. Non-Specific EOI is the normal mode of operation of the PIC within the PCH, as the interrupt being serviced currently is the interrupt entered with the interrupt acknowledge. When the PIC is operated in modes that preserve the fully nested structure, software can determine which ISR bit to clear by issuing a Specific EOI. An ISR bit that is masked is not cleared by a Non-Specific EOI if the PIC is in the special mask mode. An EOI command must be issued for both the master and slave controller. 5.8.4.9 Automatic End of Interrupt Mode In this mode, the PIC automatically performs a Non-Specific EOI operation at the trailing edge of the last interrupt acknowledge pulse. From a system standpoint, this mode should be used only when a nested multi-level interrupt structure is not required within a single PIC. The AEOI mode can only be used in the master controller and not the slave controller. 158 Datasheet Functional Description 5.8.5 Masking Interrupts 5.8.5.1 Masking on an Individual Interrupt Request Each interrupt request can be masked individually by the Interrupt Mask Register (IMR). This register is programmed through OCW1. Each bit in the IMR masks one interrupt channel. Masking IRQ2 on the master controller masks all requests for service from the slave controller. 5.8.5.2 Special Mask Mode Some applications may require an interrupt service routine to dynamically alter the system priority structure during its execution under software control. For example, the routine may wish to inhibit lower priority requests for a portion of its execution but enable some of them for another portion. The special mask mode enables all interrupts not masked by a bit set in the Mask register. Normally, when an interrupt service routine acknowledges an interrupt without issuing an EOI to clear the ISR bit, the interrupt controller inhibits all lower priority requests. In the special mask mode, any interrupts may be selectively enabled by loading the Mask Register with the appropriate pattern. The special mask mode is set by OCW3 where: SSMM=1, SMM=1, and cleared where SSMM=1, SMM=0. 5.8.6 Steering PCI Interrupts The PCH can be programmed to allow PIRQA#-PIRQH# to be routed internally to interrupts 3-7, 9-12, 14 or 15. The assignment is programmable through the PIRQx Route Control registers, located at 60-63h and 68-6Bh in Device 31:Function 0. One or more PIRQx# lines can be routed to the same IRQx input. If interrupt steering is not required, the Route registers can be programmed to disable steering. The PIRQx# lines are defined as active low, level sensitive to allow multiple interrupts on a PCI board to share a single line across the connector. When a PIRQx# is routed to specified IRQ line, software must change the IRQ's corresponding ELCR bit to level sensitive mode. The PCH internally inverts the PIRQx# line to send an active high level to the PIC. When a PCI interrupt is routed onto the PIC, the selected IRQ can no longer be used by an active high device (through SERIRQ). However, active low interrupts can share their interrupt with PCI interrupts. Internal sources of the PIRQs, including SCI and TCO interrupts, cause the external PIRQ to be asserted. The PCH receives the PIRQ input, like all of the other external sources, and routes it accordingly. Datasheet 159 Functional Description 5.9 Advanced Programmable Interrupt Controller (APIC) (D31:F0) In addition to the standard ISA-compatible PIC described in the previous chapter, the PCH incorporates the APIC. While the standard interrupt controller is intended for use in a uni-processor system, APIC can be used in either a uni-processor or multiprocessor system. 5.9.1 Interrupt Handling The I/O APIC handles interrupts very differently than the 8259. Briefly, these differences are: * Method of Interrupt Transmission. The I/O APIC transmits interrupts through memory writes on the normal datapath to the processor, and interrupts are handled without the need for the processor to run an interrupt acknowledge cycle. * Interrupt Priority. The priority of interrupts in the I/O APIC is independent of the interrupt number. For example, interrupt 10 can be given a higher priority than interrupt 3. * More Interrupts. The I/O APIC in the PCH supports a total of 24 interrupts. * Multiple Interrupt Controllers. The I/O APIC architecture allows for multiple I/O APIC devices in the system with their own interrupt vectors. 5.9.2 Interrupt Mapping The I/O APIC within the PCH supports 24 APIC interrupts. Each interrupt has its own unique vector assigned by software. The interrupt vectors are mapped as follows, and match "Config 6" of the Multi-Processor Specification. Table 5-16. APIC Interrupt Mapping1 (Sheet 1 of 2) IRQ # 160 Using SERIRQ Direct from Pin Using PCI Message 0 No No No 1 Yes No Yes 2 No No No 3 Yes No Yes 4 Yes No Yes 5 Yes No Yes 6 Yes No Yes 7 Yes No Yes Internal Modules Cascade from 8259 #1 8254 Counter 0, HPET #0 (legacy mode) 8 No No No RTC, HPET #1 (legacy mode) 9 Yes No Yes Option for SCI, TCO 10 Yes No Yes Option for SCI, TCO 11 Yes No Yes HPET #2, Option for SCI, TCO (Note2) 12 Yes No Yes HPET #3 (Note 3) 13 No No No FERR# logic 14 Yes No Yes SATA Primary (legacy mode) 15 Yes No Yes SATA Secondary (legacy mode) Datasheet Functional Description Table 5-16. APIC Interrupt Mapping1 (Sheet 2 of 2) IRQ # Using SERIRQ Direct from Pin 16 PIRQA# PIRQA# 17 PIRQB# PIRQB# 18 PIRQC# PIRQC# 19 PIRQD# PIRQD# 20 N/A PIRQE#4 21 N/A PIRQF#4 22 N/A PIRQG#4 23 N/A PIRQH#4 Using PCI Message Internal Modules Yes Internal devices are routable; see Section 10.1.26 though Section 10.1.42. Yes Option for SCI, TCO, HPET #0,1,2, 3. Other internal devices are routable; see Section 10.1.26 though Section 10.1.42. NOTES: 1. When programming the polarity of internal interrupt sources on the APIC, interrupts 0 through 15 receive active-high internal interrupt sources, while interrupts 16 through 23 receive active-low internal interrupt sources. 2. If IRQ 11 is used for HPET #2, software should ensure IRQ 11 is not shared with any other devices to ensure the proper operation of HPET #2. The PCH hardware does not prevent sharing of IRQ 11. 3. If IRQ 12 is used for HPET #3, software should ensure IRQ 12 is not shared with any other devices to ensure the proper operation of HPET #3. The PCH hardware does not prevent sharing of IRQ 12. 4. PIRQ[E:H] are Multiplexed with GPIO pins. Interrupts PIRQ[E:H] will not be exposed if they are configured as GPIOs. 5.9.3 PCI / PCI Express* Message-Based Interrupts When external devices through PCI / PCI Express wish to generate an interrupt, they will send the message defined in the PCI Express* Base Specification, Revision 1.0a for generating INTA# - INTD#. These will be translated internal assertions/de-assertions of INTA# - INTD#. 5.9.4 IOxAPIC Address Remapping To support Intel(R) Virtualization Technology, interrupt messages are required to go through similar address remapping as any other memory request. Address remapping allows for domain isolation for interrupts, so a device assigned in one domain is not allowed to generate an interrupt to another domain. The address remapping is based on the Bus: Device: Function field associated with the requests. The internal APIC is required to initiate the interrupt message using a unique Bus: Device: function. The PCH allows BIOS to program the unique Bus: Device: Function address for the internal APIC. This address field does not change the APIC functionality and the APIC is not promoted as a stand-alone PCI device. See Device 31: Function 0 Offset 6Ch for additional information. 5.9.5 External Interrupt Controller Support The PCH supports external APICs off of PCI Express ports, and does not support APICs on the PCI bus. The EOI special cycle is only forwarded to PCI Express ports. Datasheet 161 Functional Description 5.10 Serial Interrupt (D31:F0) The PCH supports a serial IRQ scheme. This allows a single signal to be used to report interrupt requests. The signal used to transmit this information is shared between the host, the PCH, and all peripherals that support serial interrupts. The signal line, SERIRQ, is synchronous to PCI clock, and follows the sustained tri-state protocol that is used by all PCI signals. This means that if a device has driven SERIRQ low, it will first drive it high synchronous to PCI clock and release it the following PCI clock. The serial IRQ protocol defines this sustained tri-state signaling in the following fashion: * S - Sample Phase. Signal driven low * R - Recovery Phase. Signal driven high * T - Turn-around Phase. Signal released The PCH supports a message for 21 serial interrupts. These represent the 15 ISA interrupts (IRQ0-1, 2-15), the four PCI interrupts, and the control signals SMI# and IOCHK#. The serial IRQ protocol does not support the additional APIC interrupts (20-23). Note: When the SATA controller is configured for legacy IDE mode, IRQ14 and IRQ15 are expected to behave as ISA legacy interrupts that cannot be shared (that is, through the Serial Interrupt pin). If IRQ14 and IRQ15 are shared with Serial Interrupt pin then abnormal system behavior may occur. For example, IRQ14/15 may not be detected by the PCH's interrupt controller. When the SATA controller is not running in Native IDE mode, IRQ14 and IRQ15 are used as special interrupts. If the SATA controller is in native modes, these interrupts can be mapped to other devices accordingly. 5.10.1 Start Frame The serial IRQ protocol has two modes of operation which affect the start frame. These two modes are: Continuous, where the PCH is solely responsible for generating the start frame; and Quiet, where a serial IRQ peripheral is responsible for beginning the start frame. The mode that must first be entered when enabling the serial IRQ protocol is continuous mode. In this mode, the PCH asserts the start frame. This start frame is 4, 6, or 8 PCI clocks wide based upon the Serial IRQ Control Register, bits 1:0 at 64h in Device 31:Function 0 configuration space. This is a polling mode. When the serial IRQ stream enters quiet mode (signaled in the Stop Frame), the SERIRQ line remains inactive and pulled up between the Stop and Start Frame until a peripheral drives the SERIRQ signal low. The PCH senses the line low and continues to drive it low for the remainder of the Start Frame. Since the first PCI clock of the start frame was driven by the peripheral in this mode, the PCH drives the SERIRQ line low for 1 PCI clock less than in continuous mode. This mode of operation allows for a quiet, and therefore lower power, operation. 162 Datasheet Functional Description 5.10.2 Data Frames Once the Start frame has been initiated, all of the SERIRQ peripherals must start counting frames based on the rising edge of SERIRQ. Each of the IRQ/DATA frames has exactly 3 phases of 1 clock each: * Sample Phase. During this phase, the SERIRQ device drives SERIRQ low if the corresponding interrupt signal is low. If the corresponding interrupt is high, then the SERIRQ devices tri-state the SERIRQ signal. The SERIRQ line remains high due to pull-up resistors (there is no internal pull-up resistor on this signal, an external pull-up resistor is required). A low level during the IRQ0-1 and IRQ2-15 frames indicates that an active-high ISA interrupt is not being requested, but a low level during the PCI INT[A:D], SMI#, and IOCHK# frame indicates that an active-low interrupt is being requested. * Recovery Phase. During this phase, the device drives the SERIRQ line high if in the Sample Phase it was driven low. If it was not driven in the sample phase, it is tri-stated in this phase. * Turn-around Phase. The device tri-states the SERIRQ line. 5.10.3 Stop Frame After all data frames, a Stop Frame is driven by the PCH. The SERIRQ signal is driven low by the PCH for 2 or 3 PCI clocks. The number of clocks is determined by the SERIRQ configuration register. The number of clocks determines the next mode. Table 5-17. Stop Frame Explanation Stop Frame Width 5.10.4 Next Mode 2 PCI clocks Quiet Mode. Any SERIRQ device may initiate a Start Frame 3 PCI clocks Continuous Mode. Only the host (the PCH) may initiate a Start Frame Specific Interrupts Not Supported Using SERIRQ There are three interrupts seen through the serial stream that are not supported by the PCH. These interrupts are generated internally, and are not sharable with other devices within the system. These interrupts are: * IRQ0. Heartbeat interrupt generated off of the internal 8254 counter 0. * IRQ8#. RTC interrupt can only be generated internally. * IRQ13. Floating point error interrupt generated off of the processor assertion of FERR#. The PCH ignores the state of these interrupts in the serial stream, and does not adjust their level based on the level seen in the serial stream. Datasheet 163 Functional Description 5.10.5 Data Frame Format Table 5-18 shows the format of the data frames. For the PCI interrupts (A-D), the output from the PCH is AND'd with the PCI input signal. This way, the interrupt can be signaled using both the PCI interrupt input signal and using the SERIRQ signal (they are shared). Table 5-18. Data Frame Format 164 Data Frame # Interrupt Clocks Past Start Frame Comment 1 IRQ0 2 Ignored. IRQ0 can only be generated using the internal 8524 2 IRQ1 5 3 SMI# 8 4 IRQ3 11 5 IRQ4 14 6 IRQ5 17 7 IRQ6 20 8 IRQ7 23 9 IRQ8 26 10 IRQ9 29 11 IRQ10 32 12 IRQ11 35 13 IRQ12 38 14 IRQ13 41 Ignored. IRQ13 can only be generated from FERR# 15 IRQ14 44 Not attached to SATA logic Causes SMI# if low. Will set the SERIRQ_SMI_STS bit. Ignored. IRQ8# can only be generated internally. 16 IRQ15 47 Not attached to SATA logic 17 IOCHCK# 50 Same as ISA IOCHCK# going active. 18 PCI INTA# 53 Drive PIRQA# 19 PCI INTB# 56 Drive PIRQB# 20 PCI INTC# 59 Drive PIRQC# 21 PCI INTD# 62 Drive PIRQD# Datasheet Functional Description 5.11 Real Time Clock (D31:F0) The Real Time Clock (RTC) module provides a battery backed-up date and time keeping device with two banks of static RAM with 128 bytes each, although the first bank has 114 bytes for general purpose usage. Three interrupt features are available: time of day alarm with once a second to once a month range, periodic rates of 122 s to 500 ms, and end of update cycle notification. Seconds, minutes, hours, days, day of week, month, and year are counted. Daylight savings compensation is no longer supported. The hour is represented in twelve or twenty-four hour format, and data can be represented in BCD or binary format. The design is functionally compatible with the Motorola MS146818B. The time keeping comes from a 32.768 kHz oscillating source, which is divided to achieve an update every second. The lower 14 bytes on the lower RAM block has very specific functions. The first ten are for time and date information. The next four (0Ah to 0Dh) are registers, which configure and report RTC functions. The time and calendar data should match the data mode (BCD or binary) and hour mode (12 or 24 hour) as selected in register B. It is up to the programmer to make sure that data stored in these locations is within the reasonable values ranges and represents a possible date and time. The exception to these ranges is to store a value of C0-FFh in the Alarm bytes to indicate a don't care situation. All Alarm conditions must match to trigger an Alarm Flag, which could trigger an Alarm Interrupt if enabled. The SET bit must be 1 while programming these locations to avoid clashes with an update cycle. Access to time and date information is done through the RAM locations. If a RAM read from the ten time and date bytes is attempted during an update cycle, the value read do not necessarily represent the true contents of those locations. Any RAM writes under the same conditions are ignored. Note: The leap year determination for adding a 29th day to February does not take into account the end-of-the-century exceptions. The logic simply assumes that all years divisible by 4 are leap years. According to the Royal Observatory Greenwich, years that are divisible by 100 are typically not leap years. In every fourth century (years divisible by 400, like 2000), the 100-year-exception is over-ridden and a leap-year occurs. Note that the year 2100 will be the first time in which the current RTC implementation would incorrectly calculate the leap-year. The PCH does not implement month/year alarms. 5.11.1 Update Cycles An update cycle occurs once a second, if the SET bit of register B is not asserted and the divide chain is properly configured. During this procedure, the stored time and date are incremented, overflow is checked, a matching alarm condition is checked, and the time and date are rewritten to the RAM locations. The update cycle will start at least 488 s after the UIP bit of register A is asserted, and the entire cycle does not take more than 1984 s to complete. The time and date RAM locations (0-9) are disconnected from the external bus during this time. To avoid update and data corruption conditions, external RAM access to these locations can safely occur at two times. When a updated-ended interrupt is detected, almost 999 ms is available to read and write the valid time and date data. If the UIP bit of Register A is detected to be low, there is at least 488 s before the update cycle begins. Warning: Datasheet The overflow conditions for leap years adjustments are based on more than one date or time item. To ensure proper operation when adjusting the time, the new time and data values should be set at least two seconds before leap year occurs. 165 Functional Description 5.11.2 Interrupts The real-time clock interrupt is internally routed within the PCH both to the I/O APIC and the 8259. It is mapped to interrupt vector 8. This interrupt does not leave the PCH, nor is it shared with any other interrupt. IRQ8# from the SERIRQ stream is ignored. However, the High Performance Event Timers can also be mapped to IRQ8#; in this case, the RTC interrupt is blocked. 5.11.3 Lockable RAM Ranges The RTC battery-backed RAM supports two 8-byte ranges that can be locked using the configuration space. If the locking bits are set, the corresponding range in the RAM will not be readable or writable. A write cycle to those locations will have no effect. A read cycle to those locations will not return the location's actual value (resultant value is undefined). Once a range is locked, the range can be unlocked only by a hard reset, which will invoke the BIOS and allow it to relock the RAM range. 5.11.4 Century Rollover The PCH detects a rollover when the Year byte (RTC I/O space, index offset 09h) transitions form 99 to 00. Upon detecting the rollover, the PCH sets the NEWCENTURY_STS bit (TCOBASE + 04h, bit 7). If the system is in an S0 state, this causes an SMI#. The SMI# handler can update registers in the RTC RAM that are associated with century value. If the system is in a sleep state (S1-S5) when the century rollover occurs, the PCH also sets the NEWCENTURY_STS bit, but no SMI# is generated. When the system resumes from the sleep state, BIOS should check the NEWCENTURY_STS bit and update the century value in the RTC RAM. 5.11.5 Clearing Battery-Backed RTC RAM Clearing CMOS RAM in a PCH-based platform can be done by using a jumper on RTCRST# or GPI. Implementations should not attempt to clear CMOS by using a jumper to pull VccRTC low. Using RTCRST# to Clear CMOS A jumper on RTCRST# can be used to clear CMOS values, as well as reset to default, the state of those configuration bits that reside in the RTC power well. When the RTCRST# is strapped to ground, the RTC_PWR_STS bit (D31:F0:A4h bit 2) will be set and those configuration bits in the RTC power well will be set to their default state. BIOS can monitor the state of this bit, and manually clear the RTC CMOS array once the system is booted. The normal position would cause RTCRST# to be pulled up through a weak pull-up resistor. Table 5-19 shows which bits are set to their default state when RTCRST# is asserted. This RTCRST# jumper technique allows the jumper to be moved and then replaced--all while the system is powered off. Then, once booted, the RTC_PWR_STS can be detected in the set state. 166 Datasheet Functional Description Table 5-19. Configuration Bits Reset by RTCRST# Assertion Bit Name Register Location Bit(s) Default State Alarm Interrupt Enable (AIE) Register B (General Configuration) (RTC_REGB) I/O space (RTC Index + 0Bh) 5 X Alarm Flag (AF) Register C (Flag Register) (RTC_REGC) I/O space (RTC Index + 0Ch) 5 X SWSMI_RATE_SEL General PM Configuration 3 Register GEN_PMCON_3 D31:F0:A4h 7:6 0 SLP_S4# Minimum Assertion Width General PM Configuration 3 Register GEN_PMCON_3 D31:F0:A4h 5:4 0 SLP_S4# Assertion Stretch Enable General PM Configuration 3 Register GEN_PMCON_3 D31:F0:A4h 3 0 RTC Power Status (RTC_PWR_STS) General PM Configuration 3 Register GEN_PMCON_3 D31:F0:A4h 2 0 Power Failure (PWR_FLR) General PM Configuration 3 Register (GEN_PMCON_3) D31:F0:A4h 1 0 AFTERG3_EN General PM Configuration 3 Register GEN_PMCON_3 D31:F0:A4h 0 0 Power Button Override Status (PRBTNOR_STS) Power Management 1 Status Register (PM1_STS) PMBase + 00h 11 0 RTC Event Enable (RTC_EN) Power Management 1 Enable Register (PM1_EN) PMBase + 02h 10 0 Sleep Type (SLP_TYP) Power Management 1 Control (PM1_CNT) PMBase + 04h 12:10 0 PME_EN General Purpose Event 0 Enables Register (GPE0_EN) PMBase + 2Ch 11 0 BATLOW_EN General Purpose Event 0 Enables Register (GPE0_EN) PMBase + 2Ch 10 0 RI_EN General Purpose Event 0 Enables Register (GPE0_EN) PMBase + 2Ch 8 0 NEWCENTURY_ST S TCO1 Status Register (TCO1_STS) TCOBase + 04h 7 0 Intruder Detect (INTRD_DET) TCO2 Status Register (TCO2_STS) TCOBase + 06h 0 0 Top Swap (TS) Backed Up Control Register (BUC) Chipset Config Registers:Offset 3414h 0 X Using a GPI to Clear CMOS A jumper on a GPI can also be used to clear CMOS values. BIOS would detect the setting of this GPI on system boot-up, and manually clear the CMOS array. Note: The GPI strap technique to clear CMOS requires multiple steps to implement. The system is booted with the jumper in new position, then powered back down. The jumper is replaced back to the normal position, then the system is rebooted again. Warning: Do not implement a jumper on VccRTC to clear CMOS. Datasheet 167 Functional Description 5.12 Processor Interface (D31:F0) The PCH interfaces to the processor with following pin-based signals other than DMI: * Standard Outputs to processor: A20GATE, INIT3_3V#, PROCPWRGD, PMSYNCH, PECI. * Standard Input from processor: THRMTRIP#. Most PCH outputs to the processor use standard buffers. The PCH has separate V_CPU_IO signals that are pulled up at the system level to the processor voltage, and thus determines VOH for the outputs to the processor. The following Processor interface legacy pins were removed from the PCH: * IGNNE#, STPCLK#, DPSLP#, are DPRSLPVR are no longer required on PCH based systems. * A20M#, SMI#, NMI, INIT#, INTR, FERR#: Functionality has been replaced by inband Virtual Legacy Wire (VLW) messages. See Section 5.12.3. 5.12.1 Processor Interface Signals and VLW Messages This section describes each of the signals that interface between the PCH and the processor(s). Note that the behavior of some signals may vary during processor reset, as the signals are used for frequency strapping. 5.12.1.1 A20M# (Mask A20) / A20GATE The A20M# VLW message is asserted when both of the following conditions are true: * The ALT_A20_GATE bit (Bit 1 of PORT92 register) is a 0. * The A20GATE input signal is a 0. The A20GATE input signal is expected to be generated by the external microcontroller (KBC). 168 Datasheet Functional Description 5.12.1.2 INIT (Initialization) The INIT# VLW Message is asserted based on any one of several events described in Table 5-20. When any of these events occur, INIT# is asserted for 16 PCI clocks, then driven high. Note: INIT3_3V# is functionally identical to INIT# VLW but it is a physical signal at 3.3 V on desktop SKUs only. Table 5-20. INIT# Going Active Cause of INIT3_3V# Going Active Shutdown special cycle from processor observed on PCH-Processor interconnect. Comment INIT assertion based on value of Shutdown Policy Select register (SPS) PORT92 write, where INIT_NOW (bit 0) transitions from a 0 to a 1. PORTCF9 write, where SYS_RST (bit 1) was a 0 and RST_CPU (bit 2) transitions from 0 to 1. 5.12.1.3 RCIN# input signal goes low. RCIN# is expected to be driven by the external microcontroller (KBC). 0 to 1 transition on RCIN# must occur before the PCH will arm INIT3_3V# to be generated again. NOTE: RCIN# signal is expected to be low during S3, S4, and S5 states. Transition on the RCIN# signal in those states (or the transition to those states) may not necessarily cause the INIT3_3V# signal to be generated to the processor. CPU BIST To enter BIST, software sets CPU_BIST_EN bit and then does a full processor reset using the CF9 register. FERR# (Numeric Coprocessor Error) The PCH supports the coprocessor error function with the FERR# message. The function is enabled using the CEN bit. If FERR# is driven active by the processor, IRQ13 goes active (internally). When it detects a write to the COPROC_ERR register (I/O Register F0h), the PCH negates the internal IRQ13 and IGNNE# will be active. IGNNE# remains active until FERR# is driven inactive. IGNNE# is never driven active unless FERR# is active. Note: Datasheet IGNNE# (Ignore Numeric Error is now internally generated by the processor. 169 Functional Description 5.12.1.4 NMI (Non-Maskable Interrupt) Non-Maskable Interrupts (NMIs) can be generated by several sources, as described in Table 5-21. Table 5-21. NMI Sources Cause of NMI 5.12.1.5 Comment SERR# goes active (either internally, externally using SERR# signal, or using message from processor) Can instead be routed to generate an SCI, through the NMI2SCI_EN bit (Device 31:Function 0, TCO Base + 08h, bit 11). IOCHK# goes active using SERIRQ# stream (ISA system Error) Can instead be routed to generate an SCI, through the NMI2SCI_EN bit (Device 31:Function 0, TCO Base + 08h, bit 11). Processor Power Good (PROCPWRGD) This signal is connected to the processor's VCCPRWGOOD_0 and VCCPRWGOOD_1 input. This signal represents a logical AND of the PCH's PWROK and SYS_PWROK signals. 5.12.2 Dual-Processor Issues 5.12.2.1 Usage Differences In dual-processor designs, some of the processor signals are unused or used differently than for uniprocessor designs. * A20M#/A20GATE and FERR# are generally not used, but still supported. * I/O APIC and SMI# are assumed to be used. 5.12.3 Virtual Legacy Wire (VLW) Messages The PCH supports VLW messages as alternative method of conveying the status of the following legacy sideband interface signals to the processor: * A20M#, INTR, SMI#, INIT#, NMI Note: IGNNE# VLW message is not required to be generated by the PCH as it is internally emulated by the Processor. VLW are inbound messages to the processor. They are communicated using Vendor Defined Message over the DMI link. Legacy processor signals can only be delivered using VLW in the PCH. Delivery of legacy processor signals (A20M#, INTR, SMI#, INIT# or NMI) using I/O APIC controller is not supported. 170 Datasheet Functional Description 5.13 Power Management (D31:F0) 5.13.1 Features * Support for Advanced Configuration and Power Interface, Version 3.0b (ACPI) providing power and thermal management -- ACPI 24-Bit Timer SCI and SMI# Generation * PCI PME# signal for Wake Up from Low-Power states * System Sleep State Control -- ACPI S3 state--Suspend to RAM (STR) -- ACPI S4 state--Suspend-to-Disk (STD) -- ACPI G2/S5 state--Soft Off (SOFF) -- Power Failure Detection and Recovery * Management Engine Power Management Support -- Wake events from the Management Engine (enabled from all S-States including Catastrophic S5 conditions) 5.13.2 PCH and System Power States Table 5-22 shows the power states defined for PCH-based platforms. The state names generally match the corresponding ACPI states. Table 5-22. General Power States for Systems Using the PCH Datasheet State/ Substates Legacy Name / Description G0/S0/C0 Full On: Processor operating. Individual devices may be shut down or be placed into lower power states to save power. G0/S0/Cx Cx State: Cx states are processor power states within the S0 system state that provide for various levels of power savings. The processor initiates C-state entry and exit while interacting with the PCH. The PCH will base its behavior on the processor state. G1/S1 S1: The PCH provides the S1 messages and the S0 messages on a wake event. It is preferred for systems to use C-states than S1. G1/S3 Suspend-To-RAM (STR): The system context is maintained in system DRAM, but power is shut off to non-critical circuits. Memory is retained and refreshes continue. All external clocks stop except RTC. G1/S4 Suspend-To-Disk (STD): The context of the system is maintained on the disk. All power is then shut off to the system except for the logic required to resume. G2/S5 Soft Off (SOFF): System context is not maintained. All power is shut off except for the logic required to restart. A full boot is required when waking. G3 Mechanical OFF (MOFF): System context not maintained. All power is shut off except for the RTC. No "Wake" events are possible. This state occurs if the user removes the main system batteries in a mobile system, turns off a mechanical switch, or if the system power supply is at a level that is insufficient to power the "waking" logic. When system power returns, transition will depend on the state just prior to the entry to G3 and the AFTERG3_EN bit in the GEN_PMCON3 register (D31:F0, offset A4). See Table 5-28 for more details. 171 Functional Description Table 5-23 shows the transitions rules among the various states. Note that transitions among the various states may appear to temporarily transition through intermediate states. For example, in going from S0 to S3, it may appear to pass through the G1/S1 states. These intermediate transitions and states are not listed in the table. Table 5-23. State Transition Rules for the PCH Present State Transition Trigger * DMI Msg G0/S0/C0 G0/S0/Cx G1/S1, G1/S3, or G1/S4 G2/S5 G3 Next State * Mechanical Off/Power Failure * * * * * DMI Msg * Power Button Override * Mechanical Off/Power Failure * G0/S0/C0 * S5 * G3 * Any Enabled Wake Event * G0/S0/C0 (See Note 2) * Power Button Override * G2/S5 * Mechanical Off/Power Failure * G3 * Any Enabled Wake Event * G0/S0/C0 (See Note 2) * Mechanical Off/Power Failure * G3 * Power Returns * Optional to go to S0/C0 (reboot) or G2/ S5 (stay off until power button pressed or other wake event). (See Notes 1 and 2) * SLP_EN bit set * Power Button Override G0/S0/Cx G1/Sx or G2/S5 state G2/S5 G3 NOTES: 1. Some wake events can be preserved through power failure. 2. Transitions from the S1-S5 or G3 states to the S0 state are deferred until BATLOW# is inactive in mobile configurations. 172 Datasheet Functional Description 5.13.3 System Power Planes The system has several independent power planes, as described in Table 5-24. Note that when a particular power plane is shut off, it should go to a 0 V level. Table 5-24. System Power Plane s Plane Controlled By CPU SLP_S3# signal MAIN SLP_S3# signal Description The SLP_S3# signal can be used to cut the power to the processor completely. When SLP_S3# goes active, power can be shut off to any circuit not required to wake the system from the S3 state. Since the S3 state requires that the memory context be preserved, power must be retained to the main memory. The processor, devices on the PCI bus, LPC I/F, and graphics will typically be shut off when the Main power plane is off, although there may be small subsections powered. MEMORY SLP_S5# signal When SLP_S5# goes active, power can be shut off to any circuit not required to wake the system from the S5 state. Since the memory context does not need to be preserved in the S5 state, the power to the memory can also be shut. SLP_M# This pin is asserted when the manageability platform goes to MOff. Depending on the platform, this pin may be used to control the Management Engine power planes, the clock chip power, LAN subsystem power, and the SPI flash power. LAN SLP_LAN# This signal is asserted in Sx/Moff when both host and Intel(R) ME WOL are not supported. This signal can be use to control power to the Intel 82567 GbE PHY and depending on platform design may also control power to VccME3_3. DEVICE[n] Implementation Specific Individual subsystems may have their own power plane. For example, GPIO signals may be used to control the power to disk drives, audio amplifiers, or the display screen. ME 5.13.4 SLP_S4# signal When SLP_S4# goes active, power can be shut off to any circuit not required to wake the system from the S4. Since the memory context does not need to be preserved in the S4 state, the power to the memory can also be shut down. SMI#/SCI Generation Upon any enabled SMI event taking place while the End of SMI (EOS) bit is set, the PCH will clear the EOS bit and assert SMI to the processor, which will cause it to enter SMM space. SMI assertion is performed using a Virtual Legacy Wire (VLW) message. Prior system generations (those based upon legacy processors) used an actual SMI# pin. Once the SMI VLW has been delivered, the PCH takes no action on behalf of active SMI events until Host software sets the End of SMI (EOS) bit. At that point, if any SMI events are still active, the PCH will send another SMI VLW message. The SCI is a level-mode interrupt that is typically handled by an ACPI-aware operating system. In non-APIC systems (which is the default), the SCI IRQ is routed to one of the 8259 interrupts (IRQ 9, 10, or 11). The 8259 interrupt controller must be programmed to level mode for that interrupt. Datasheet 173 Functional Description In systems using the APIC, the SCI can be routed to interrupts 9, 10, 11, 20, 21, 22, or 23. The interrupt polarity changes depending on whether it is on an interrupt shareable with a PIRQ or not (see Section 13.1.3). The interrupt remains asserted until all SCI sources are removed. Table 5-25 shows which events can cause an SMI and SCI. Note that some events can be programmed to cause either an SMI or SCI. The usage of the event for SCI (instead of SMI) is typically associated with an ACPI-based system. Each SMI or SCI source has a corresponding enable and status bit. Table 5-25. Causes of SMI and SCI (Sheet 1 of 2) Cause SCI SMI Additional Enables Where Reported PME# Yes Yes PME_EN=1 PME_STS PME_B0 (Internal, Bus 0, PMECapable Agents) Yes Yes PME_B0_EN=1 PME_B0_STS PCI Express* PME Messages Yes Yes PCI Express Hot Plug Message Yes Yes Power Button Press Yes Yes PWRBTN_EN=1 Power Button Override (Note 7) Yes No None PRBTNOR_STS RTC Alarm Yes Yes RTC_EN=1 RTC_STS Ring Indicate Yes Yes RI_EN=1 RI_STS USB#1 wakes Yes Yes USB1_EN=1 USB1_STS USB#2 wakes Yes Yes USB2_EN=1 USB2_STS USB#3 wakes Yes Yes USB3_EN=1 USB3_STS USB#4 wakes Yes Yes USB4_EN=1 USB4_STS USB#5 wakes Yes Yes USB5_EN=1 USB5_STS USB#6 wakes Yes Yes USB6_EN=1 USB6_STS USB#7 wakes Yes Yes USB7_EN=1 USB7_STS ACPI Timer overflow (2.34 sec.) Yes Yes TMROF_EN=1 TMROF_STS PCI_EXP_EN=1 (Not enabled for SMI) HOT_PLUG_EN=1 (Not enabled for SMI) PCI_EXP_STS HOT_PLUG_STS PWRBTN_STS GPI[x]_Route=10; GPI[x]_EN=1 174 Any GPI[15:0] Yes Yes (SCI) GPI[x]_Route=01; ALT_GPI_SMI[x]_EN=1 (SMI) GPI[x]_STS GPIO[27] Yes Yes GP27_EN=1 GP27_STS TCO SCI Logic Yes No TCOSCI_EN=1 TCOSCI_STS TCO SCI message from CPU Yes No none CPUSCI_STS TCO SMI Logic No Yes TCO_EN=1 TCO_STS TCO SMI--Year 2000 Rollover No Yes none NEWCENTURY_STS TCO SMI--TCO TIMEROUT No Yes none TIMEOUT TCO SMI--OS writes to TCO_DAT_IN register No Yes none OS_TCO_SMI TCO SMI--Message from CPU No Yes none CPUSMI_STS TCO SMI--NMI occurred (and NMIs mapped to SMI) No Yes NMI2SMI_EN=1 NMI2SMI_STS ALT_GPI_SMI[x]_STS Datasheet Functional Description Table 5-25. Causes of SMI and SCI (Sheet 2 of 2) Cause SCI SMI Additional Enables Where Reported TCO SMI--INTRUDER# signal goes active No Yes INTRD_SEL=10 INTRD_DET TCO SMI--Change of the BIOSWE (D31:F0:DCh, bit 0) bit from 0 to 1 No Yes BLE=1 BIOSWR_STS TCO SMI--Write attempted to BIOS No Yes BIOSWE=1 BIOSWR_STS BIOS_RLS written to Yes No GBL_EN=1 GBL_STS GBL_RLS written to No Yes BIOS_EN=1 BIOS_STS Write to B2h register No Yes APMC_EN = 1 APM_STS Periodic timer expires No Yes PERIODIC_EN=1 PERIODIC_STS 64 ms timer expires No Yes SWSMI_TMR_EN=1 SWSMI_TMR_STS Enhanced USB Legacy Support Event No Yes LEGACY_USB2_EN = 1 LEGACY_USB2_STS Enhanced USB Intel Specific Event No Yes INTEL_USB2_EN = 1 INTEL_USB2_STS Serial IRQ SMI reported No Yes none SERIRQ_SMI_STS Device monitors match address in its range No Yes none SMBus Host Controller No Yes SMB_SMI_EN Host Controller Enabled SMBus host status reg. SMBus Slave SMI message No Yes none SMBUS_SMI_STS SMBus SMBALERT# signal active No Yes none SMBUS_SMI_STS SMBus Host Notify message received No Yes HOST_NOTIFY_INTREN SMBUS_SMI_STS HOST_NOTIFY_STS (Mobile Only) BATLOW# assertion Yes Yes BATLOW_EN=1 BATLOW_STS Access microcontroller 62h/66h No Yes MCSMI_EN MCSMI_STS SLP_EN bit written to 1 No Yes SMI_ON_SLP_EN=1 SMI_ON_SLP_EN_STS SPI Command Completed No Yes None SPI_SMI_STS Software Generated GPE Yes Yes SWGPE=1 SWGPE_STS USB2_STS, Write Enable Status GPIO_UNLOCK_SMI_STS USB Per-Port Registers Write Enable bit changes to 1 No Yes USB2_EN=1, Write_Enable_SMI_Enable=1 GPIO Lockdown Enable bit changes from `1' to `0' No Yes GPIO_UNLOCK_SMI_EN=1 DEVTRAP_STS NOTES: 1. SCI_EN must be 1 to enable SCI, except for BIOS_RLS. SCI_EN must be 0 to enable SMI. 2. SCI can be routed to cause interrupt 9:11 or 20:23 (20:23 only available in APIC mode). 3. GBL_SMI_EN must be 1 to enable SMI. 4. EOS must be written to 1 to re-enable SMI for the next 1. 5. The PCH must have SMI fully enabled when the PCH is also enabled to trap cycles. If SMI is not enabled in conjunction with the trap enabling, then hardware behavior is undefined. 6. Only GPI[15:0] may generate an SMI or SCI. 7. When a power button override first occurs, the system will transition immediately to S5. The SCI will only occur after the next wake to S0 if the residual status bit (PRBTNOR_STS) is not cleared prior to setting SCI_EN. 8. GBL_STS being set will cause an SCI, even if the SCI_EN bit is not set. Software must take great care not to set the BIOS_RLS bit (which causes GBL_STS to be set) if the SCI handler is not in place. Datasheet 175 Functional Description 5.13.4.1 PCI Express* SCI PCI Express ports and the processor (using DMI) have the ability to cause PME using messages. When a PME message is received, the PCH will set the PCI_EXP_STS bit. If the PCI_EXP_EN bit is also set, the PCH can cause an SCI using the GPE1_STS register. 5.13.4.2 PCI Express* Hot-Plug PCI Express has a Hot-Plug mechanism and is capable of generating a SCI using the GPE1 register. It is also capable of generating an SMI. However, it is not capable of generating a wake event. 5.13.5 C-States PCH-based systems implement C-states by having the processor control the states. The chipset exchanges messages with the processor as part of the C-state flow, but the chipset no longer directly controls any of the processor impacts of C-states, such as voltage levels or processor clocking. In addition to the new messages, the PCH also provides additional information to the processor using a sideband pin (PM_SYNC). All of the legacy C-state related pins (STPCLK#, STP_CPU#, DPRSLP#, DPRSLPVR#, etc.) do not exist on the PCH. 5.13.6 Dynamic PCI Clock Control (Mobile Only) The PCI clock can be dynamically controlled independent of any other low-power state. This control is accomplished using the CLKRUN# protocol as described in the PCI Mobile Design Guide, and is transparent to software. The Dynamic PCI Clock control is handled using the following signals: * CLKRUN#: Used by PCI and LPC peripherals to request the system PCI clock to run * STP_PCI#: Used to stop the system PCI clock Note: The 33 MHz clock to the PCH is "free-running" and is not affected by the STP_PCI# signal. Note: STP_PCI# is only used if PCI/LPC clocks are distributed from clock synthesizer rather than PCH. 176 Datasheet Functional Description 5.13.6.1 Conditions for Checking the PCI Clock When there is a lack of PCI activity the PCH has the capability to stop the PCI clocks to conserve power. "PCI activity" is defined as any activity that would require the PCI clock to be running. Any of the following conditions will indicate that it is not okay to stop the PCI clock: * Cycles on PCI or LPC * Cycles of any internal device that would need to go on the PCI bus * SERIRQ activity Behavioral Description * When there is a lack of activity (as defined above) for 29 PCI clocks, the PCH deasserts (drive high) CLKRUN# for 1 clock and then tri-states the signal. 5.13.6.2 Conditions for Maintaining the PCI Clock PCI masters or LPC devices that wish to maintain the PCI clock running will observe the CLKRUN# signal de-asserted, and then must re-assert if (drive it low) within 3 clocks. * When the PCH has tri-stated the CLKRUN# signal after de-asserting it, the PCH then checks to see if the signal has been re-asserted (externally). * After observing the CLKRUN# signal asserted for 1 clock, the PCH again starts asserting the signal. * If an internal device needs the PCI bus, the PCH asserts the CLKRUN# signal. 5.13.6.3 Conditions for Stopping the PCI Clock * If no device re-asserts CLKRUN# once it has been de-asserted for at least 6 clocks, the PCH stops the PCI clock by asserting the STP_PCI# signal to the clock synthesizer. * For case when PCH distribute PCI clock, PCH stop PCI clocks without the involvement of STP_PCI#. 5.13.6.4 Conditions for Re-Starting the PCI Clock * A peripheral asserts CLKRUN# to indicate that it needs the PCI clock re-started. * When the PCH observes the CLKRUN# signal asserted for 1 (free running) clock, the PCH de-asserts the STP_PCI# signal to the clock synthesizer within 4 (free running) clocks. * Observing the CLKRUN# signal asserted externally for 1 (free running) clock, the PCH again starts driving CLKRUN# asserted. If an internal source requests the clock to be re-started, the PCH re-asserts CLKRUN#, and simultaneously de-asserts the STP_PCI# signal. For case when PCH distribute PCI clock, PCH start PCI clocks without the involvement of STP_PCI#. Datasheet 177 Functional Description 5.13.6.5 LPC Devices and CLKRUN# If an LPC device (of any type) needs the 33 MHz PCI clock, such as for LPC DMA or LPC serial interrupt, then it can assert CLKRUN#. Note that LPC devices running DMA or bus master cycles will not need to assert CLKRUN#, since the PCH asserts it on their behalf. The LDRQ# inputs are ignored by the PCH when the PCI clock is stopped to the LPC devices to avoid misinterpreting the request. The PCH assumes that only one more rising PCI clock edge occurs at the LPC device after the assertion of STP_PCI#. Upon de-assertion of STP_PCI#, the PCH assumes that the LPC device receives its first clock rising edge corresponding to the PCH's second PCI clock rising edge after the deassertion. 5.13.7 Sleep States 5.13.7.1 Sleep State Overview The PCH directly supports different sleep states (S1-S5), which are entered by methods such as setting the SLP_EN bit or due to a Power Button press. The entry to the Sleep states is based on several assumptions: * The G3 state cannot be entered using any software mechanism. The G3 state indicates a complete loss of power. 5.13.7.2 Initiating Sleep State Sleep states (S1-S5) are initiated by: * Masking interrupts, turning off all bus master enable bits, setting the desired type in the SLP_TYP field, and then setting the SLP_EN bit. The hardware then attempts to gracefully put the system into the corresponding Sleep state. * Pressing the PWRBTN# Signal for more than 4 seconds to cause a Power Button Override event. In this case the transition to the S5 state is less graceful, since there are no dependencies on DMI messages from the processor or on clocks other than the RTC clock. * Assertion of the THRMTRIP# signal will cause a transition to the S5 state. This can occur when system is in S0 or S1 state. * Shutdown by integrated manageability functions (ASF/Intel(R) AMT). * Internal watchdog timer timeout events. Table 5-26. Sleep Types 178 Sleep Type Comment S1 System lowers the processor's power consumption. No snooping is possible in this state. S3 The PCH asserts SLP_S3#. The SLP_S3# signal controls the power to non-critical circuits. Power is only retained to devices needed to wake from this sleeping state, as well as to the memory. S4 The PCH asserts SLP_S3# and SLP_S4#. The SLP_S4# signal shuts off the power to the memory subsystem. Only devices needed to wake from this state should be powered. S5 The PCH asserts SLP_S3#, SLP_S4# and SLP_S5#. Datasheet Functional Description 5.13.7.3 Exiting Sleep States Sleep states (S1-S5) are exited based on Wake events. The Wake events forces the system to a full on state (S0), although some non-critical subsystems might still be shut off and have to be brought back manually. For example, the hard disk may be shut off during a sleep state and have to be enabled using a GPIO pin before it can be used. Upon exit from the PCH-controlled Sleep states, the WAK_STS bit is set. The possible causes of Wake Events (and their restrictions) are shown in Table 5-27. Note: (Mobile Only) If the BATLOW# signal is asserted, the PCH does not attempt to wake from an S1-S5 state, even if the power button is pressed. This prevents the system from waking when the battery power is insufficient to wake the system. Wake events that occur while BATLOW# is asserted are latched by the PCH, and the system wakes after BATLOW# is de-asserted. Table 5-27 Causes of Wake Events (Sheet 1 of 2) Cause RTC Alarm Power Button Wake from "Reset" Types (Note 2) Wake from S1, Sx Wake from S1, Sx After Power Loss (Note 1) Set RTC_EN bit in PM1_EN register. Y Y Always enabled as Wake event. Y Y Y Y How Enabled GPE0_EN register GPI[15:0] Y GPIO27 Set GP27_EN in GPE0_EN Register. Y Y LAN Will use PME#. Wake enable set with LAN logic. Y Y RI# Set RI_EN bit in GPE0_EN register. Y Y Intel(R) High Definition Audio Event sets PME_B0_STS bit; PM_B0_EN must be enabled. Can not wake from S5 state if it was entered due to power failure or power button override. Y Y Primary PME# PME_B0_EN bit in GPE0_EN register. Y Y Secondary PME# Set PME_EN bit in GPE0_EN register. Y Y PCI_EXP_WA KE# PCI_EXP_WAKE bit. (Note 3) Y Y S1 S1 S1 S1 Y Y SATA Datasheet Note: GPIs that are in the core well are not capable of waking the system from sleep states when the core well is not powered. Set PME_EN bit in GPE0_EN register. (Note 4) PCI_EXP PME Message Must use the PCI Express* WAKE# pin rather than messages for wake from S3, S4, or S5. SMBALERT# Always enabled as Wake event. Y 179 Functional Description Table 5-27 Causes of Wake Events (Sheet 2 of 2) How Enabled Wake from S1, Sx Wake from S1, Sx After Power Loss (Note 1) Wake from "Reset" Types (Note 2) SMBus Slave Wake Message (01h) Wake/SMI# command always enabled as a Wake event. Note: SMBus Slave Message can wake the system from S1-S5, as well as from S5 due to Power Button Override. Y Y Y SMBus Host Notify message received HOST_NOTIFY_WKEN bit SMBus Slave Command register. Reported in the SMB_WAK_STS bit in the GPEO_STS register. Y Y Y Intel(R) ME Non-Maskable Always enabled as a wake event. Wake Y Y Y Integrated WOL Enable Override Y Y Y Cause WOL Enable Override bit (in Configuration Space). NOTES: 1. This column represents what the PCH would honor as wake events but there may be enabling dependencies on the device side which are not enabled after a power loss. 2. Reset Types include: Power Button override, Intel ME initiated power button override, Intel ME initiated host partition reset with power down, Intel ME Watchdog Timer, SMBus unconditional power down, Processor thermal trip, PCH catastrophic temperature event. 3. When the WAKE# pin is active and the PCI Express device is enabled to wake the system, the PCH will wake the platform. 4. SATA can only trigger a wake event in S1, but if PME is asserted prior to S3/S4/S5 entry and software does not clear the PME_B0_STS, a wake event would still result. It is important to understand that the various GPIs have different levels of functionality when used as wake events. The GPIs that reside in the core power well can only generate wake events from sleep states where the core well is powered. Also, only certain GPIs are "ACPI Compliant," meaning that their Status and Enable bits reside in ACPI I/O space. Table 5-27 summarizes the use of GPIs as wake events. Table 5-27. GPI Wake Events GPI Power Well Wake From Notes GPI[7:0] Core S1 ACPI Compliant GPI[15:8] Suspend S1-S5 ACPI Compliant The latency to exit the various Sleep states varies greatly and is heavily dependent on power supply design, so much so that the exit latencies due to the PCH are insignificant. 180 Datasheet Functional Description 5.13.7.4 PCI Express* WAKE# Signal and PME Event Message PCI Express ports can wake the platform from any sleep state (S1, S3, S4, or S5) using the WAKE# pin. WAKE# is treated as a wake event, but does not cause any bits to go active in the GPE_STS register. PCI Express ports and the processor (using DMI) have the ability to cause PME using messages. When a PME message is received, the PCH will set the PCI_EXP_STS bit. 5.13.7.5 Sx-G3-Sx, Handling Power Failures Depending on when the power failure occurs and how the system is designed, different transitions could occur due to a power failure. The AFTERG3_EN bit provides the ability to program whether or not the system should boot once power returns after a power loss event. If the policy is to not boot, the system remains in an S5 state (unless previously in S4). There are only three possible events that will wake the system after a power failure. 1. PWRBTN#: PWRBTN# is always enabled as a wake event. When RSMRST# is low (G3 state), the PWRBTN_STS bit is reset. When the PCH exits G3 after power returns (RSMRST# goes high), the PWRBTN# signal is already high (because VCCstandby goes high before RSMRST# goes high) and the PWRBTN_STS bit is 0. 2. RI#: RI# does not have an internal pull-up. Therefore, if this signal is enabled as a wake event, it is important to keep this signal powered during the power loss event. If this signal goes low (active), when power returns the RI_STS bit is set and the system interprets that as a wake event. 3. RTC Alarm: The RTC_EN bit is in the RTC well and is preserved after a power loss. Like PWRBTN_STS the RTC_STS bit is cleared when RSMRST# goes low. The PCH monitors both PCH PWROK and RSMRST# to detect for power failures. If PCH PWROK goes low, the PWROK_FLR bit is set. If RSMRST# goes low, PWR_FLR is set. Note: Although PME_EN is in the RTC well, this signal cannot wake the system after a power loss. PME_EN is cleared by RTCRST#, and PME_STS is cleared by RSMRST#. Table 5-28. Transitions Due to Power Failure 5.13.8 State at Power Failure AFTERG3_EN bit Transition When Power Returns S0, S1, S3 1 0 S5 S0 S4 1 0 S4 S0 S5 1 0 S5 S0 Event Input Signals and Their Usage The PCH has various input signals that trigger specific events. This section describes those signals and how they should be used. Datasheet 181 Functional Description 5.13.8.1 PWRBTN# (Power Button) The PCH PWRBTN# signal operates as a "Fixed Power Button" as described in the Advanced Configuration and Power Interface, Version 2.0b. PWRBTN# signal has a 16 ms de-bounce on the input. The state transition descriptions are included in Table 5-29. Note that the transitions start as soon as the PWRBTN# is pressed (but after the debounce logic), and does not depend on when the Power Button is released. Note: During the time that the SLP_S4# signal is stretched for the minimum assertion width (if enabled), the Power Button is not a wake event. See Power Button Override Function section below for further detail. Table 5-29. Transitions Due to Power Button Present State Event Transition/Action Comment S0/Cx PWRBTN# goes low SMI or SCI generated (depending on SCI_EN, PWRBTN_EN and GLB_SMI_EN) Software typically initiates a Sleep state S1-S5 PWRBTN# goes low Wake Event. Transitions to S0 state Standard wakeup G3 PWRBTN# pressed None PWRBTN# held low for at least 4 consecutive seconds Unconditional transition to S5 state S0-S4 No effect since no power Not latched nor detected No dependence on processor (DMI Messages) or any other subsystem Power Button Override Function If PWRBTN# is observed active for at least four consecutive seconds, the state machine should unconditionally transition to the G2/S5 state, regardless of present state (S0-S4), even if the PCH PWROK is not active. In this case, the transition to the G2/S5 state should not depend on any particular response from the processor (such as, a DMI Messages), nor any similar dependency from any other subsystem. The PWRBTN# status is readable to check if the button is currently being pressed or has been released. The status is taken after the de-bounce, and is readable using the PWRBTN_LVL bit. Note: The 4-second PWRBTN# assertion should only be used if a system lock-up has occurred. The 4-second timer starts counting when the PCH is in a S0 state. If the PWRBTN# signal is asserted and held active when the system is in a suspend state (S1-S5), the assertion causes a wake event. Once the system has resumed to the S0 state, the 4-second timer starts. Note: During the time that the SLP_S4# signal is stretched for the minimum assertion width (if enabled by D31:F0:A4h bit 3), the Power Button is not a wake event. As a result, it is conceivable that the user will press and continue to hold the Power Button waiting for the system to awake. Since a 4-second press of the Power Button is already defined as an Unconditional Power down, the power button timer will be forced to inactive while the power-cycle timer is in progress. Once the power-cycle timer has expired, the Power Button awakes the system. Once the minimum SLP_S4# power cycle expires, the Power Button must be pressed for another 4 to 5 seconds to create the Override condition to S5. 182 Datasheet Functional Description Sleep Button The Advanced Configuration and Power Interface, Version 2.0b defines an optional Sleep button. It differs from the power button in that it only is a request to go from S0 to S1-S4 (not S5). Also, in an S5 state, the Power Button can wake the system, but the Sleep Button cannot. Although the PCH does not include a specific signal designated as a Sleep Button, one of the GPIO signals can be used to create a "Control Method" Sleep Button. See the Advanced Configuration and Power Interface, Version 2.0b for implementation details. 5.13.8.2 RI# (Ring Indicator) The Ring Indicator can cause a wake event (if enabled) from the S1-S5 states. Table 5-30 shows when the wake event is generated or ignored in different states. If in the G0/S0/Cx states, the PCH generates an interrupt based on RI# active, and the interrupt will be set up as a Break event. Table 5-30. Transitions Due to RI# Signal Present State Event RI_EN Event S0 RI# Active X Ignored S1-S5 RI# Active 0 Ignored 1 Wake Event Note: Filtering/Debounce on RI# will not be done in PCH. Can be in modem or external. 5.13.8.3 PME# (PCI Power Management Event) The PME# signal comes from a PCI device to request that the system be restarted. The PME# signal can generate an SMI#, SCI, or optionally a Wake event. The event occurs when the PME# signal goes from high to low. No event is caused when it goes from low to high. There is also an internal PME_B0 bit. This is separate from the external PME# signal and can cause the same effect. 5.13.8.4 SYS_RESET# Signal When the SYS_RESET# pin is detected as active after the 16 ms debounce logic, the PCH attempts to perform a "graceful" reset, by waiting up to 25 ms for the SMBus to go idle. If the SMBus is idle when the pin is detected active, the reset occurs immediately; otherwise, the counter starts. If at any point during the count the SMBus goes idle the reset occurs. If, however, the counter expires and the SMBus is still active, a reset is forced upon the system even though activity is still occurring. Once the reset is asserted, it remains asserted for 5 to 6 ms regardless of whether the SYS_RESET# input remains asserted or not. It cannot occur again until SYS_RESET# has been detected inactive after the debounce logic, and the system is back to a full S0 state with PLTRST# inactive. Note that if bit 3 of the CF9h I/O register is set then SYS_RESET# will result in a full power cycle reset. 5.13.8.5 THRMTRIP# Signal If THRMTRIP# goes active, the processor is indicating an overheat condition, and the PCH immediately transitions to an S5 state, driving SLP_S3#, SLP_S4#, SLP_S5# low, and setting the CTS bit. The transition looks like a power button override. Datasheet 183 Functional Description When a THRMTRIP# event occurs, the PCH will power down immediately without following the normal S0 -> S5 path. The PCH will immediately drive SLP_S3#, SLP_S4#, and SLP_S5# low after sampling THRMTRIP# active. If the processor is running extremely hot and is heating up, it is possible (although very unlikely) that components around it, such as the PCH, are no longer executing cycles properly. Therefore, if THRMTRIP# goes active, and the PCH is relying on state machine logic to perform the power down, the state machine may not be working, and the system will not power down. The PCH provides filtering for short low glitches on the THRMTRIP# signal to prevent erroneous system shut downs from noise. Glitches shorter than 25 nsec are ignored. During boot, THRMTRIP# is ignored until SLP_S3#, PWROK, and PLTRST# are all `1'. During entry into a powered-down state (due to S3, S4, S5 entry, power cycle reset, etc.) THRMTRIP# is ignored until either SLP_S3# = 0, or PCH PWROK = 0, or SYS_PWROK = 0. Note: A thermal trip event will: * Clear the PWRBTN_STS bit * Clear all the GPE0_EN register bits * Clear the SMB_WAK_STS bit only if SMB_SAK_STS was set due to SMBus slave receiving message and not set due to SMBAlert 5.13.9 ALT Access Mode Before entering a low power state, several registers from powered down parts may need to be saved. In the majority of cases, this is not an issue, as registers have read and write paths. However, several of the ISA compatible registers are either read only or write only. To get data out of write-only registers, and to restore data into read-only registers, the PCH implements an ALT access mode. If the ALT access mode is entered and exited after reading the registers of the PCH timer (8254), the timer starts counting faster (13.5 ms). The following steps listed below can cause problems: 1. BIOS enters ALT access mode for reading the PCH timer related registers. 2. BIOS exits ALT access mode. 3. BIOS continues through the execution of other needed steps and passes control to the operating system. After getting control in step #3, if the operating system does not reprogram the system timer again, the timer ticks may be happening faster than expected. For example Microsoft MS-DOS* and its associated software assume that the system timer is running at 54.6 ms and as a result the time-outs in the software may be happening faster than expected. Operating systems (such as, Microsoft Windows* 98 and Windows* 2000) reprogram the system timer and therefore do not encounter this problem. For other operating systems (such as, Microsoft MS-DOS*) the BIOS should restore the timer back to 54.6 ms before passing control to the operating system. If the BIOS is entering ALT access mode before entering the suspend state it is not necessary to restore the timer contents after the exit from ALT access mode. 184 Datasheet Functional Description 5.13.9.1 Write Only Registers with Read Paths in ALT Access Mode The registers described in Table 5-31 have read paths in ALT access mode. The access number field in the table indicates which register will be returned per access to that port. Table 5-31. Write Only Registers with Read Paths in ALT Access Mode (Sheet 1 of 2) Restore Data I/O Addr 00h 01h 02h 03h 04h 05h 06h 07h Datasheet # of Rds Access Restore Data Data I/O Addr # of Rds Access Data 1 DMA Chan 0 base address low byte 1 Timer Counter 0 status, bits [5:0] 2 DMA Chan 0 base address high byte 2 Timer Counter 0 base count low byte 1 DMA Chan 0 base count low byte 3 Timer Counter 0 base count high byte 2 DMA Chan 0 base count high byte 4 Timer Counter 1 base count low byte 1 DMA Chan 1 base address low byte 5 Timer Counter 1 base count high byte 2 DMA Chan 1 base address high byte 6 Timer Counter 2 base count low byte 1 DMA Chan 1 base count low byte 7 Timer Counter 2 base count high byte 2 DMA Chan 1 base count high byte 41h 1 Timer Counter 1 status, bits [5:0] 1 DMA Chan 2 base address low byte 42h 1 Timer Counter 2 status, bits [5:0] 2 DMA Chan 2 base address high byte 70h 1 Bit 7 = NMI Enable, Bits [6:0] = RTC Address 1 DMA Chan 2 base count low byte 2 DMA Chan 2 base count high byte 1 DMA Chan 3 base address low byte 2 DMA Chan 3 base address high byte 1 DMA Chan 3 base count low byte 2 DMA Chan 3 base count high byte 2 2 2 2 2 2 2 2 40h C4h C6h C8h 7 1 DMA Chan 5 base address low byte 2 DMA Chan 5 base address high byte 1 DMA Chan 5 base count low byte 2 DMA Chan 5 base count high byte 1 DMA Chan 6 base address low byte 2 DMA Chan 6 base address high byte 2 2 2 185 Functional Description Table 5-31. Write Only Registers with Read Paths in ALT Access Mode (Sheet 2 of 2) Restore Data I/O Addr # of Rds Access Restore Data Data I/O Addr 20h Data 1 DMA Chan 6 base count low byte DMA Chan 0-3 Command2 2 DMA Chan 0-3 Request 2 DMA Chan 6 base count high byte 3 DMA Chan 0 Mode: Bits(1:0) = 00 1 DMA Chan 7 base address low byte 4 DMA Chan 1 Mode: Bits(1:0) = 01 2 DMA Chan 7 base address high byte 5 DMA Chan 2 Mode: Bits(1:0) = 10 1 DMA Chan 7 base count low byte 6 DMA Chan 3 Mode: Bits(1:0) = 11. 2 DMA Chan 7 base count high byte 1 PIC ICW2 of Master controller 1 DMA Chan 4-7 Command2 2 PIC ICW3 of Master controller 2 DMA Chan 4-7 Request 3 PIC ICW4 of Master controller 3 DMA Chan 4 Mode: Bits(1:0) = 00 4 PIC OCW1 of Master controller1 4 DMA Chan 5 Mode: Bits(1:0) = 01 5 PIC OCW2 of Master controller 5 DMA Chan 6 Mode: Bits(1:0) = 10 6 PIC OCW3 of Master controller 6 DMA Chan 7 Mode: Bits(1:0) = 11. 7 PIC ICW2 of Slave controller 8 PIC ICW3 of Slave controller 9 PIC ICW4 of Slave controller 6 12 Access 1 CAh 08h # of Rds 10 PIC OCW1 of Slave controller1 11 PIC OCW2 of Slave controller 12 PIC OCW3 of Slave controller CCh CEh D0h 2 2 2 6 NOTES: 1. The OCW1 register must be read before entering ALT access mode. 2. Bits 5, 3, 1, and 0 return 0. 186 Datasheet Functional Description 5.13.9.2 PIC Reserved Bits Many bits within the PIC are reserved, and must have certain values written for the PIC to operate properly. Therefore, there is no need to return these values in ALT access mode. When reading PIC registers from 20h and A0h, the reserved bits shall return the values listed in Table 5-32. Table 5-32. PIC Reserved Bits Return Values 5.13.9.3 PIC Reserved Bits Value Returned ICW2(2:0) 000 ICW4(7:5) 000 ICW4(3:2) 00 ICW4(0) 0 OCW2(4:3) 00 OCW3(7) 0 OCW3(5) Reflects bit 6 OCW3(4:3) 01 Read Only Registers with Write Paths in ALT Access Mode The registers described in Table 5-33 have write paths to them in ALT access mode. Software restores these values after returning from a powered down state. These registers must be handled special by software. When in normal mode, writing to the base address/count register also writes to the current address/count register. Therefore, the base address/count must be written first, then the part is put into ALT access mode and the current address/count register is written. Table 5-33. Register Write Accesses in ALT Access Mode I/O Address Register Write Value 08h DMA Status Register for channels 0-3. D0h DMA Status Register for channels 4-7. 5.13.10 System Power Supplies, Planes, and Signals 5.13.10.1 Power Plane Control with SLP_S3#, SLP_S4#, SLP_S5#, SLP_M# and SLP_LAN# The SLP_S3# output signal can be used to cut power to the system core supply, since it only goes active for the Suspend-to-RAM state (typically mapped to ACPI S3). Power must be maintained to the PCH suspend well, and to any other circuits that need to generate Wake signals from the Suspend-to-RAM state. During S3 (Suspend-to-RAM) all signals attached to powered down plans will be tri-stated or driven low, unless they are pulled using a pull-up resistor. Cutting power to the core may be done using the power supply, or by external FETs on the motherboard. The SLP_S4# or SLP_S5# output signal can be used to cut power to the system core supply, as well as power to the system memory, since the context of the system is saved on the disk. Cutting power to the memory may be done using the power supply, or by external FETs on the motherboard. Datasheet 187 Functional Description The SLP_S4# output signal is used to remove power to additional subsystems that are powered during SLP_S3#. SLP_S5# output signal can be used to cut power to the system core supply, as well as power to the system memory, since the context of the system is saved on the disk. Cutting power to the memory may be done using the power supply, or by external FETs on the motherboard. SLP_M# output signal can be used to cut power to the Management Engine, Clock chip and SPI flash on a platform that supports Intel(R) AMT. SLP_LAN# output signal can be used to cut power to the external Intel 82567 GbE PHY device. Depending on platform design SLP_LAN# may also be used to control power to VccME3_3 if it is desired to always power the LAN and ME subsystems up and down together. 5.13.10.2 SLP_S4# and Suspend-To-RAM Sequencing The system memory suspend voltage regulator is controlled by the Glue logic. The SLP_S4# signal should be used to remove power to system memory rather than the SLP_S5# signal. The SLP_S4# logic in the PCH provides a mechanism to fully cycle the power to the DRAM and/or detect if the power is not cycled for a minimum time. Note: To use the minimum DRAM power-down feature that is enabled by the SLP_S4# Assertion Stretch Enable bit (D31:F0:A4h bit 3), the DRAM power must be controlled by the SLP_S4# signal. 5.13.10.3 PWROK Signal When asserted, PWROK is an indication to the PCH that its core well power rails are powered and stable. PWROK can be driven asynchronously. When PCH PWROK is low, the PCH asynchronously asserts PLTRST#. PWROK must not glitch, even if RSMRST# is low. It is required that the power associated with PCI/PCIe have been valid for 99 ms prior to PWROK assertion to comply with the 100 ms PCI 2.3 / PCIe 2.0 specification on PLTRST# de-assertion. Note: SYS_RESET# is recommended for implementing the system reset button. This saves external logic that is needed if the PWROK input is used. Additionally, it allows for better handling of the SMBus and processor resets and avoids improperly reporting power failures. 5.13.10.4 BATLOW# (Battery Low) (Mobile Only) The BATLOW# input can inhibit waking from S3, S4, and S5 states if there is not sufficient power. It also causes an SMI if the system is already in an S0 state. 188 Datasheet Functional Description 5.13.10.5 SLP_LAN# Pin Behavior Table 5-34 summarizes SLP_LAN# pin behavior. Table 5-34. SLP_LAN# Pin Behavior Pin Functionality (Determined by soft strap) GPIO29 Input / Output (Determined by GP_IO_SEL bit) Pin Value In S0 or M3 Value in S3-S5/ Moff In (Default) 1 0 Out 1 Depends on GPIO29 output data value In (Default) 1 1 Out 1 Depends on GPIO29 output data value 0 (Default) In Z (tri-state) 0 1 In Z (tri-state) 1 N/A Out Depends on GPIO29 output data value Depends on GPIO29 output data value SLP_LAN Default Value Bit 0 (Default) SLP_LAN# 1 GPIO29 5.13.10.6 RTCRST# and SRTCRST# RTCRST# is used to reset PCH registers in the RTC Well to their default value. If a jumper is used on this pin, it should only be pulled low when system is in the G3 state and then replaced to the default jumper position. Upon booting, BIOS should recognize that RTCRST# was asserted and clear internal PCH registers accordingly. It is imperative that this signal not be pulled low in the S0 to S5 states. SRTCRST# is used to reset portions of the Intel Manageability Engine and should not be connected to a jumper or button on the platform. The only time this signal gets asserted (driven low in combination with RTCRST#) should be when the coin cell battery is removed or not installed and the platform is in the G3 state. Pulling this signal low independently (without RTCRST# also being driven low) may cause the platform to enter an indeterminate state. Similar to RTCRST#, it is imperative that SRTCRST# not be pulled low in the S0 to S5 states. See Figure 2-2 which demonstrates the proper circuit connection of these pins. 5.13.11 Clock Generators The clock generator is expected to provide the frequencies shown in Table 4-1. Datasheet 189 Functional Description 5.13.12 Legacy Power Management Theory of Operation Instead of relying on ACPI software, legacy power management uses BIOS and various hardware mechanisms. The scheme relies on the concept of detecting when individual subsystems are idle, detecting when the whole system is idle, and detecting when accesses are attempted to idle subsystems. However, the operating system is assumed to be at least APM enabled. Without APM calls, there is no quick way to know when the system is idle between keystrokes. The PCH does not support burst modes. 5.13.12.1 APM Power Management (Desktop Only) The PCH has a timer that, when enabled by the 1MIN_EN bit in the SMI Control and Enable register, generates an SMI once per minute. The SMI handler can check for system activity by reading the DEVTRAP_STS register. If none of the system bits are set, the SMI handler can increment a software counter. When the counter reaches a sufficient number of consecutive minutes with no activity, the SMI handler can then put the system into a lower power state. If there is activity, various bits in the DEVTRAP_STS register will be set. Software clears the bits by writing a 1 to the bit position. The DEVTRAP_STS register allows for monitoring various internal devices, or Super I/O devices (SP, PP, FDC) on LPC or PCI, keyboard controller accesses, or audio functions on LPC or PCI. Other PCI activity can be monitored by checking the PCI interrupts. 5.13.12.2 Mobile APM Power Management (Mobile Only) In mobile systems, there are additional requirements associated with device power management. To handle this, the PCH has specific SMI traps available. The following algorithm is used: 1. The periodic SMI timer checks if a device is idle for the require time. If so, it puts the device into a low-power state and sets the associated SMI trap. 2. When software (not the SMI handler) attempts to access the device, a trap occurs (the cycle doesn't really go to the device and an SMI is generated). 3. The SMI handler turns on the device and turns off the trap. 4. The SMI handler exits with an I/O restart. This allows the original software to continue. 5.13.13 Reset Behavior When a reset is triggered, the PCH will send a warning message to the processor to allow the processor to attempt to complete any outstanding memory cycles and put memory into a safe state before the platform is reset. When the processor is ready, it will send an acknowledge message to the PCH. Once the message is received the PCH asserts PLTRST#. The PCH does not require an acknowledge message from the processor to trigger PLTRST#. A global reset will occur after 4 seconds if an acknowledge from the processor is not received. When the PCH causes a reset by asserting PLTRST# its output signals will go to their reset states as defined in Chapter 3. 190 Datasheet Functional Description A reset in which the host platform is reset and PLTRST# is asserted is called a Host Reset or Host Partition Reset. Depending on the trigger a host reset may also result in power cycling see Table 5-37 for details. If a host reset is triggered and the PCH times out before receiving an acknowledge message from the processor a Global Reset with power cycle will occur. A reset in which the host and Intel ME partitions of the platform are reset is called a Global Reset. During a Global Reset, all PCH functionality is reset except RTC Power Well backed information and Suspend well status, configuration, and functional logic for controlling and reporting the reset. Intel ME and Host power back up after the power cycle period. Straight to S5 is another reset type where all power wells that are controlled by the SLP_S3#, SLP_S4#, and SLP_A# pins, as well as SLP_S5# and SLP_LAN# (if pins are not configured as GPIOs), are turned off. All PCH functionality is reset except RTC Power Well backed information and Suspend well status, configuration, and functional logic for controlling and reporting the reset. The host stays there until a valid wake event occurs. Table 5-35 shows the various reset triggers. Table 5-35. Causes of Host and Global Resets (Sheet 1 of 2) Host Reset without Power Cycle1 Host Reset with Power Cycle2 Write of 0Eh to CF9h Register when Global Reset Bit=0b No Yes No (Note 4) Write of 06h to CF9h Register when Global Reset Bit=0b Yes No No (Note 4) Write of 06h or 0Eh to CF9h Register when Global Reset Bit=1b No No Yes SYS_RESET# Asserted and CF9h Bit 3 = 0 Yes No No (Note 4) SYS_RESET# Asserted and CF9h Bit 3 = 1 No Yes No (Note 4) SMBus Slave Message received for Reset with Power Cycle No Yes No (Note 4) SMBus Slave Message received for Reset without Power Cycle Yes No No (Note 4) TCO Watchdog Timer reaches zero two times Yes No No (Note 4) Power Failure: PWROK signal goes inactive in S0/S1 or RSMRST# asserts No No Yes SYS_PWROK Failure: SYS_PWROK signal goes inactive in S0/S1 No No Yes Processor Thermal Trip (THRMTRIP#) causes transition to S5 and reset asserts No No No Yes Power Button 4 second override causes transition to S5 and reset asserts No No No Yes Special shutdown cycle from processor causes CF9h-like PLTRST# and CF9h Global Reset Bit = 1 No No Yes Special shutdown cycle from processor causes CF9h-like PLTRST# and CF9h Global Reset Bit = 0 and Bit 3 = 1 No Yes No (Note 4) Special shutdown cycle from processor causes CF9h-like PLTRST# and CF9h Global Reset Bit = 0 and Bit 3 = 0 Yes No No (Note 4) Intel(R) Management Engine Triggered Host Reset without power cycle Yes No No (Note 4) Intel Management Engine Triggered Host Reset with power cycle No Yes No (Note 4) Intel Management Engine Watchdog Timer Timeout No No No Intel Management Engine Triggered Global Reset No No Yes Trigger Datasheet Global Reset with Power Cycle3 Straight to S5 (Host Stays there) Yes 191 Functional Description Table 5-35. Causes of Host and Global Resets (Sheet 2 of 2) Host Reset without Power Cycle1 Host Reset with Power Cycle2 Global Reset with Power Cycle3 Intel Management Engine Triggered Host Reset with power down (host stays there) No Yes (Note 5) No (Note 4) PLTRST# Entry Time-out No No Yes S3/4/5 Entry Timeout No No No PROCPWRGD Stuck Low No No Yes Power Management Watchdog Timer No No No Yes Intel Management Engine Hardware Uncorrectable Error No No No Yes Trigger Straight to S5 (Host Stays there) Yes NOTES: 1. The PCH drops this type of reset request if received while the system is in S3/S4/S5. 2. PCH does not drop this type of reset request if received while system is in a softwareentered S3/S4/S5 state. However, the PCH will perform the reset without executing the RESET_WARN protocol in these states. 3. The PCH does not send warning message to processor, reset occurs without delay. 4. Trigger will result in Global Reset with power cycle if the acknowledge message is not received by the PCH. 5. The PCH waits for enabled wake event to complete reset. 5.14 System Management (D31:F0) The PCH provides various functions to make a system easier to manage and to lower the Total Cost of Ownership (TCO) of the system. Features and functions can be augmented using external A/D converters and GPIO, as well as an external microcontroller. The following features and functions are supported by the PCH: * Processor present detection -- Detects if processor fails to fetch the first instruction after reset * Various Error detection (such as ECC Errors) indicated by host controller -- Can generate SMI#, SCI, SERR, NMI, or TCO interrupt * Intruder Detect input -- Can generate TCO interrupt or SMI# when the system cover is removed -- INTRUDER# allowed to go active in any power state, including G3 * Detection of bad BIOS Flash (FWH or Flash on SPI) programming -- Detects if data on first read is FFh (indicates that BIOS flash is not programmed) * Ability to hide a PCI device -- Allows software to hide a PCI device in terms of configuration space through the use of a device hide register (See Section 10.1.65) Note: 192 Voltage ID from the processor can be read using GPI signals. Datasheet Functional Description 5.14.1 Theory of Operation The System Management functions are designed to allow the system to diagnose failing subsystems. The intent of this logic is that some of the system management functionality can be provided without the aid of an external microcontroller. 5.14.1.1 Detecting a System Lockup When the processor is reset, it is expected to fetch its first instruction. If the processor fails to fetch the first instruction after reset, the TCO timer times out twice and the PCH asserts PLTRST#. 5.14.1.2 Handling an Intruder The PCH has an input signal, INTRUDER#, that can be attached to a switch that is activated by the system's case being open. This input has a two RTC clock debounce. If INTRUDER# goes active (after the debouncer), this will set the INTRD_DET bit in the TCO2_STS register. The INTRD_SEL bits in the TCO_CNT register can enable the PCH to cause an SMI# or interrupt. The BIOS or interrupt handler can then cause a transition to the S5 state by writing to the SLP_EN bit. The software can also directly read the status of the INTRUDER# signal (high or low) by clearing and then reading the INTRD_DET bit. This allows the signal to be used as a GPI if the intruder function is not required. If the INTRUDER# signal goes inactive some point after the INTRD_DET bit is written as a 1, then the INTRD_DET signal will go to a 0 when INTRUDER# input signal goes inactive. Note that this is slightly different than a classic sticky bit, since most sticky bits would remain active indefinitely when the signal goes active and would immediately go inactive when a 1 is written to the bit. Note: The INTRD_DET bit resides in the PCH's RTC well, and is set and cleared synchronously with the RTC clock. Thus, when software attempts to clear INTRD_DET (by writing a 1 to the bit location) there may be as much as two RTC clocks (about 65 s) delay before the bit is actually cleared. Also, the INTRUDER# signal should be asserted for a minimum of 1 ms to ensure that the INTRD_DET bit will be set. Note: If the INTRUDER# signal is still active when software attempts to clear the INTRD_DET bit, the bit remains set and the SMI is generated again immediately. The SMI handler can clear the INTRD_SEL bits to avoid further SMIs. However, if the INTRUDER# signal goes inactive and then active again, there will not be further SMIs, since the INTRD_SEL bits would select that no SMI# be generated. 5.14.1.3 Detecting Improper Flash Programming The PCH can detect the case where the BIOS flash is not programmed. This results in the first instruction fetched to have a value of FFh. If this occurs, the PCH sets the BAD_BIOS bit. The BIOS flash may reside in FWH or flash on the SPI bus. 5.14.1.4 Heartbeat and Event Reporting using SMLink/SMBus Heartbeat and event reporting using SMLink/SMBus is no longer supported. The AMT logic in PCH can be programmed to generate an interrupt to the Management Engine when an event occurs. The Management Engine will poll the TCO registers to gather appropriate bits to send the event message to the Gigabit Ethernet controller, if Management Engine is programmed to do so. Datasheet 193 Functional Description 5.14.2 TCO Modes 5.14.2.1 TCO Legacy/Compatible Mode In TCO Legacy/Compatible mode, only the host SMBus is used. TCO Slave can be connected to the host SMBus internally by setting the soft trap TCO Slave Select in the flash descriptor. If a device has a single SMBus interface and needs access to the TCO slave and be visible to the host SMBus controller, TCO slave needs to be configured to be connected to the SMBus pins by the soft strap. In this mode, the Management Engine SMBus controllers are not used and should be disabled by soft strap. Figure 5-5. TCO Legacy/Compatible Mode SMBus Configuration PCH TCO Legacy/Compatible Mode Intel ME SMBus Controller 3 X Intel ME SMBus Controller 2 X Intel ME SMBus Controller 1 X SPD (Slave) PCI/PCIe* Device uCtrl SMBus Host SMBus TCO Slave Legacy Sensors (Master or Slave with ALERT) 3rd Party NIC In TCO Legacy/Compatible mode the PCH can function directly with an external LAN controller or equivalent external LAN controller to report messages to a network management console without the aid of the system processor. This is crucial in cases where the processor is malfunctioning or cannot function due to being in a low-power state. Table 5-36 includes a list of events that will report messages to the network management console. 194 Datasheet Functional Description Table 5-36. Event Transitions that Cause Messages Event Assertion? de-assertion? Comments INTRUDER# pin yes no Must be in "S1 or hung S0" state THRM# pin yes yes Must be in "S1 or hung S0" state. Note that the THRM# pin is isolated when the core power is off, thus preventing this event in S3-S5. Watchdog Timer Expired yes no (NA) GPIO[11]/ SMBALERT# pin yes yes Must be in "S1 or hung S0" state BATLOW# yes yes Must be in "S1 or hung S0" state CPU_PWR_FLR yes no "S1 or hung S0" state entered "S1 or hung S0" state entered NOTE: The GPIO11/SMBALERT# pin will trigger an event message (when enabled by the GPIO11_ALERT_DISABLE bit) regardless of whether it is configured as a GPI or not. 5.14.2.2 Advanced TCO Mode The PCH supports the Advanced TCO mode in which SMLink0 and SMLink1 are used in addition to the host SMBus. See Figure 5-6 for more details. In this mode, the Intel ME SMBus controllers must be enabled by soft strap in the flash descriptor. The SMLink0 is dedicated to integrated LAN use and when an Intel PHY 82579 is connected to SMLink0, a soft strap must be set to indicate that the PHY is connected to SMLink0. The interface will be running at the frequency of 300 KHz - 400 KHz depending on different factors such as board routing or bus loading when the Fast Mode is enabled via a soft strap (See SPI Flash Programming Guide Application Note for more detail). When an Intel PHY 82577 or 82578 is connected to SMLink0, a soft strap must be set to indicate that the PHY is connected to SMLink0. In the case where a BMC is connected to SMLink1, the BMC communicates with Management Engine through Intel ME SMBus connected to SMLink1. The host and TCO slave communicated with BMC through SMBus. Datasheet 195 Functional Description Figure 5-6. Advanced TCO Mode PCH Intel ME SMBus Controller 3 Intel ME SMBus Controller 2 Intel ME SMBus Controller 1 Advanced TCO Mode EC or BMC SMLink1 Intel 82577 or 82578 SMLink0 SPD (Slave) PCI/PCIe* Device Host SMBus TCO Slave 196 SMBus Legacy Sensors (Master or Slave with ALERT) Datasheet Functional Description 5.15 General Purpose I/O (D31:F0) The PCH contains up to 72 General Purpose Input/Output (GPIO) signals. Each GPIO can be configured as an input or output signal. The number of inputs and outputs varies depending on the configuration. Below is a brief summary of new GPIO features. * Capability to mask Suspend well GPIOs from CF9h events configured using GP_RST_SEL registers) * Added capability to program GPIO prior to switching to output 5.15.1 Power Wells Some GPIOs exist in the suspend power plane. Care must be taken to make sure GPIO signals are not driven high into powered-down planes. Some PCH GPIOs may be connected to pins on devices that exist in the core well. If these GPIOs are outputs, there is a danger that a loss of core power (PWROK low) or a Power Button Override event results in the PCH driving a pin to a logic 1 to another device that is powered down. 5.15.2 SMI# SCI and NMI Routing The routing bits for GPIO[15:0] allow an input to be routed to SMI#, SCI, NMI or neither. Note that a bit can be routed to either an SMI# or an SCI, but not both. 5.15.3 Triggering GPIO[15:0] have "sticky" bits on the input. See the GPE0_STS register and the ALT_GPI_SMI_STS register. As long as the signal goes active for at least 2 clock cycles, the PCH keeps the sticky status bit active. The active level can be selected in the GP_INV register. This does not apply to GPI_NMI_STS residing in GPIO IO space. If the system is in an S0 or an S1 state, the GPI inputs are sampled at 33 MHz, so the signal only needs to be active for about 60 ns to be latched. In the S3-S5 states, the GPI inputs are sampled at 32.768 kHz, and thus must be active for at least 61 microseconds to be latched. Note: GPIs that are in the core well are not capable of waking the system from sleep states where the core well is not powered. If the input signal is still active when the latch is cleared, it will again be set. Another edge trigger is not required. This makes these signals "level" triggered inputs. 5.15.4 GPIO Registers Lockdown The following GPIO registers are locked down when the GPIO Lockdown Enable (GLE) bit is set. The GLE bit resides in D31:F0:GPIO Control (GC) register. * Offset 00h: GPIO_USE_SEL[31:0] * Offset 04h: GP_IO_SEL[31:0] * Offset 0Ch: GP_LVL[31:0] * Offset 28h: GPI_NMI_EN[15:0] * Offset 2Ch: GPI_INV[31:0] * Offset 30h: GPIO_USE_SEL2[63:32] * Offset 34h: GPI_IO_SEL2[63:32] * Offset 38h: GP_LVL2[63:32] * Offset 40h: GPIO_USE_SEL3[95:64] * Offset 44h: GPI_IO_SEL3[95:64] * Offset 48h: GP_LVL3[95:64] * Offset 60h: GP_RST_SEL[31:0] * Offset 64h: GP_RST_SEL2[63:32] * Offset 68h: GP_RST_SEL3[95:64] Datasheet 197 Functional Description Once these registers are locked down, they become Read-Only registers and any software writes to these registers will have no effect. To unlock the registers, the GPIO Lockdown Enable (GLE) bit is required to be cleared to `0'. When the GLE bit changes from a `1' to a `0' a System Management Interrupt (SMI#) is generated if enabled. Once the GPIO_UNLOCK_SMI bit is set, it can not be changed until a PLTRST# occurs. This ensures that only BIOS can change the GPIO configuration. If the GLE bit is cleared by unauthorized software, BIOS will set the GLE bit again when the SMI# is triggered and these registers will continue to be locked down. 5.15.5 Serial POST Codes Over GPIO The PCH adds the extended capability allowing system software to serialize POST or other messages on GPIO. This capability negates the requirement for dedicated diagnostic LEDs on the platform. Additionally, based on the newer BTX form factors, the PCI bus as a target for POST codes is increasingly difficult to support as the total number of PCI devices supported are decreasing. 5.15.5.1 Theory of operation For the PCH generation POST code serialization logic will be shared with GPIO. These GPIOs will likely be shared with LED control offered by the Super I/O (SIO) component. Figure 5-7 shows a likely configuration. Figure 5-7. Serial Post over GPIO Reference Circuit V_3P3_STBY R PCH SIO LED Note: The pull-up value is based on the brightness required. The anticipated usage model is that either the PCH or the SIO can drive a pin low to turn off an LED. In the case of the power LED, the SIO would normally leave its corresponding pin in a high-Z state to allow the LED to turn on. In this state, the PCH can blink the LED by driving its corresponding pin low and subsequently tri-stating the buffer. The I/O buffer should not drive a `1' when configured for this functionality and should be capable of sinking 24 mA of current. An external optical sensing device can detect the on/off state of the LED. By externally post-processing the information from the optical device, the serial bit stream can be recovered. The hardware will supply a `sync' byte before the actual data transmission to allow external detection of the transmit frequency. The frequency of transmission should be limited to 1 transition every 1 s to ensure the detector can reliably sample 198 Datasheet Functional Description the on/off state of the LED. To allow flexibility in pull-up resistor values for power optimization, the frequency of the transmission is programmable using the DRS field in the GP_GB_CMDSTS register. The serial bit stream is Manchester encoded. This choice of transmission ensures that a transition will be seen on every clock. The 1 or 0 data is based on the transmission happening during the high or low phase of the clock. As the clock will be encoded within the data stream, hardware must ensure that the Z-0 and 0-Z transitions are glitch-free. Driving the pin directly from a flop or through glitch-free logic are possible methods to meet the glitch-free requirement. A simplified hardware/software register interface provides control and status information to track the activity of this block. Software enabling the serial blink capability should implement an algorithm referenced below to send the serialized message on the enabled GPIO. 1. Read the Go/Busy status bit in the GP_GB_CMDSTS register and verify it is cleared. This will ensure that the GPIO is idled and a previously requested message is still not in progress. 2. Write the data to serialize into the GP_GB_DATA register. 3. Write the DLS and DRS values into the GP_GB_CMDSTS register and set the Go bit. This may be accomplished using a single write. The reference diagram shows the LEDs being powered from the suspend supply. By providing a generic capability that can be used both in the main and the suspend power planes maximum flexibility can be achieved. A key point to make is that the PCH will not unintentionally drive the LED control pin low unless a serialization is in progress. System board connections utilizing this serialization capability are required to use the same power plane controlling the LED as the PCH GPIO pin. Otherwise, the PCH GPIO may float low during the message and prevent the LED from being controlled from the SIO. The hardware will only be serializing messages when the core power well is powered and the processor is operational. Care should be taken to prevent the PCH from driving an active `1' on a pin sharing the serial LED capability. Since the SIO could be driving the line to 0, having the PCH drive a 1 would create a high current path. A recommendation to avoid this condition involves choosing a GPIO defaulting to an input. The GP_SER_BLINK register should be set first before changing the direction of the pin to an output. This sequence ensures the open-drain capability of the buffer is properly configured before enabling the pin as an output. 5.15.5.2 Serial Message Format To serialize the data onto the GPIO, an initial state of high-Z is assumed. The SIO is required to have its LED control pin in a high-Z state as well to allow the PCH to blink the LED (see the reference diagram). The three components of the serial message include the sync, data, and idle fields. The sync field is 7 bits of `1' data followed by 1 bit of `0' data. Starting from the high-Z state (LED on) provides external hardware a known initial condition and a known pattern. In case one or more of the leading 1 sync bits are lost, the 1s followed by 0 provide a clear indication of `end of sync'. This pattern will be used to `lock' external sampling logic to the encoded clock. The data field is shifted out with the highest byte first (MSB). Within each byte, the most significant bit is shifted first (MSb). Datasheet 199 Functional Description The idle field is enforced by the hardware and is at least 2 bit times long. The hardware will not clear the Busy and Go bits until this idle time is met. Supporting the idle time in hardware prevents time-based counting in BIOS as the hardware is immediately ready for the next serial code when the Go bit is cleared. Note that the idle state is represented as a high-Z condition on the pin. If the last transmitted bit is a 1, returning to the idle state will result in a final 0-1 transition on the output Manchester data. Two full bit times of idle correspond to a count of 4 time intervals (the width of the time interval is controlled by the DRS field). The following waveform shows a 1-byte serial write with a data byte of 5Ah. The internal clock and bit position are for reference purposes only. The Manchester D is the resultant data generated and serialized onto the GPIO. Since the buffer is operating in open-drain mode the transitions are from high-Z to 0 and back. Bit 7 6 5 4 3 2 1 0 Internal Clock Manchester D 8-bit sync field (1111_1110) 5.16 5A data byte 2 clk idle SATA Host Controller (D31:F2, F5) The SATA function in the PCH has three modes of operation to support different operating system conditions. In the case of Native IDE enabled operating systems, the PCH uses two controllers to enable all six ports of the bus. The first controller (Device 31: Function 2) supports ports 0 - 3 and the second controller (Device 31: Function 5) supports ports 4 and 5. When using a legacy operating system, only one controller (Device 31: Function 2) is available that supports ports 0 - 3. In AHCI or RAID mode, only one controller (Device 31: Function 2) is used enabling all six ports and the second controller (Device 31: Function 5) shall be disabled. The MAP register, Section 15.1.28, provides the ability to share PCI functions. When sharing is enabled, all decode of I/O is done through the SATA registers. Device 31, Function 1 (IDE controller) is hidden by software writing to the Function Disable Register (D31, F0, offset F2h, bit 1), and its configuration registers are not used. The PCH SATA controllers feature six sets of interface signals (ports) that can be independently enabled or disabled (they cannot be tri-stated or driven low). Each interface is supported by an independent DMA controller. Note: SATA port 2 and 3 are not available for the HM55 and Intel 3400 chipsets. The PCH SATA controllers interact with an attached mass storage device through a register interface that is equivalent to that presented by a traditional IDE host adapter. The host software follows existing standards and conventions when accessing the register interface and follows standard command protocol conventions. Note: 200 SATA interface transfer rates are independent of UDMA mode settings. SATA interface transfer rates will operate at the bus's maximum speed, regardless of the UDMA mode reported by the SATA device or the system BIOS. Datasheet Functional Description 5.16.1 SATA Feature Support PCH (AHCI/RAID Disabled) PCH (AHCI/RAID Enabled) Native Command Queuing (NCQ) N/A Supported Auto Activate for DMA N/A Supported Hot Plug Support N/A Supported N/A Supported Supported Supported Feature Asynchronous Signal Recovery 3 Gb/s Transfer Rate ATAPI Asynchronous Notification N/A Supported Host & Link Initiated Power Management N/A Supported Staggered Spin-Up Supported Supported Command Completion Coalescing N/A N/A External SATA N/A Supported Feature Datasheet Description Native Command Queuing (NCQ) Allows the device to reorder commands for more efficient data transfers Auto Activate for DMA Collapses a DMA Setup then DMA Activate sequence into a DMA Setup only Hot Plug Support Allows for device detection without power being applied and ability to connect and disconnect devices without prior notification to the system Asynchronous Signal Recovery Provides a recovery from a loss of signal or establishing communication after hot plug 3 Gb/s Transfer Rate Capable of data transfers up to 3Gb/s ATAPI Asynchronous Notification A mechanism for a device to send a notification to the host that the device requires attention Host & Link Initiated Power Management Capability for the host controller or device to request Partial and Slumber interface power states Staggered Spin-Up Enables the host the ability to spin up hard drives sequentially to prevent power load problems on boot Command Completion Coalescing Reduces interrupt and completion overhead by allowing a specified number of commands to complete and then generating an interrupt to process the commands External SATA Technology that allows for an outside the box connection of up to 2 meters (when using the cable defined in SATA-IO) 201 Functional Description 5.16.2 Theory of Operation 5.16.2.1 Standard ATA Emulation The PCH contains a set of registers that shadow the contents of the legacy IDE registers. The behavior of the Command and Control Block registers, PIO, and DMA data transfers, resets, and interrupts are all emulated. Note: The PCH will assert INTR when the master device completes the EDD command regardless of the command completion status of the slave device. If the master completes EDD first, an INTR is generated and BSY will remain '1' until the slave completes the command. If the slave completes EDD first, BSY will be '0' when the master completes the EDD command and asserts INTR. Software must wait for busy to clear (0) before completing an EDD command, as required by the ATA5 through ATA7 (T13) industry standards. 5.16.2.2 48-Bit LBA Operation The SATA host controller supports 48-bit LBA through the host-to-device register FIS when accesses are performed using writes to the task file. The SATA host controller will ensure that the correct data is put into the correct byte of the host-to-device FIS. There are special considerations when reading from the task file to support 48-bit LBA operation. Software may need to read all 16-bits. Since the registers are only 8-bits wide and act as a FIFO, a bit must be set in the device/control register, which is at offset 3F6h for primary and 376h for secondary (or their native counterparts). If software clears bit 7 of the control register before performing a read, the last item written will be returned from the FIFO. If software sets bit 7 of the control register before performing a read, the first item written will be returned from the FIFO. 5.16.3 SATA Swap Bay Support The PCH provides for basic SATA swap bay support using the PSC register configuration bits and power management flows. A device can be powered down by software and the port can then be disabled, allowing removal and insertion of a new device. Note: This SATA swap bay operation requires board hardware (implementation specific), BIOS, and operating system support. 5.16.4 Hot Plug Operation The PCH supports Hot Plug Surprise removal and Insertion Notification in the PARTIAL, SLUMBER and Listen Mode states when used with Low Power Device Presence Detection. Software can take advantage of power savings in the low power states while enabling hot plug operation. See chapter 7 of the AHCI specification for details. 5.16.4.1 Low Power Device Presence Detection Low Power Device Presence Detection enables SATA Link Power Management to coexist with hot plug (insertion and removal) without interlock switch or cold presence detect. The detection mechanism allows Hot Plug events to be detectable by hardware across all link power states (Active, PARTIAL, SLUMBER) as well as AHCI Listen Mode. If the Low Power Device Presence Detection circuit is disabled the PCH reverts to Hot Plug Surprise Removal Notification (without an interlock switch) mode that is mutually exclusive of the PARTIAL and SLUMBER power management states. 202 Datasheet Functional Description 5.16.5 Function Level Reset Support (FLR) The SATA Host Controller supports the Function Level Reset (FLR) capability. The FLR capability can be used in conjunction with Intel(R) Virtualization Technology. FLR allows an operating system in a Virtual Machine to have complete control over a device, including its initialization, without interfering with the rest of the platform. The device provides a software interface that enables the Operating System to reset the whole device as if a PCI reset was asserted. 5.16.5.1 FLR Steps 5.16.5.1.1 FLR Initialization 1. A FLR is initiated by software writing a `1' to the Initiate FLR bit. 2. All subsequent requests targeting the Function will not be claimed and will be Master Abort Immediate on the bus. This includes any configuration, I/O or Memory cycles, however, the Function shall continue to accept completions targeting the Function. 5.16.5.1.2 FLR Operation The Function will Reset all configuration, I/O and memory registers of the Function except those indicated otherwise and reset all internal states of the Function to the default or initial condition. 5.16.5.1.3 FLR Completion The Initiate FLR bit is reset (cleared) when the FLR reset is completed. This bit can be used to indicate to the software that the FLR reset is completed. Note: From the time Initiate FLR bit is written to 1 software must wait at least 100 ms before accessing the function. 5.16.6 Intel(R) Rapid Storage Technology Configuration The Intel(R) Rapid Storage Technology offers several diverse options for RAID (redundant array of independent disks) to meet the needs of the end user. AHCI support provides higher performance and alleviates disk bottlenecks by taking advantage of the independent DMA engines that each SATA port offers in the PCH. * RAID Level 0 performance scaling up to 4 drives, enabling higher throughput for data intensive applications such as video editing. * Data security is offered through RAID Level 1, which performs mirroring. * RAID Level 10 provides high levels of storage performance with data protection, combining the fault-tolerance of RAID Level 1 with the performance of RAID Level 0. By striping RAID Level 1 segments, high I/O rates can be achieved on systems that require both performance and fault-tolerance. RAID Level 10 requires 4 hard drives, and provides the capacity of two drives. * RAID Level 5 provides highly efficient storage while maintaining fault-tolerance on 3 or more drives. By striping parity, and rotating it across all disks, fault tolerance of any single drive is achieved while only consuming 1 drive worth of capacity. That is, a 3 drive RAID 5 has the capacity of 2 drives, or a 4 drive RAID 5 has the capacity of 3 drives. RAID 5 has high read transaction rates, with a medium write rate. RAID 5 is well suited for applications that require high amounts of storage while maintaining fault tolerance. Datasheet 203 Functional Description By using the PCH's built-in Intel(R) Rapid Storage Technology, there is no loss of PCI resources (request/grant pair) or add-in card slot. Intel(R) Rapid Storage Technology functionality requires the following items: 1. The PCH SKU enabled for Intel(R) Rapid Storage Technology (see Section 1.3) 2. Intel(R) Rapid Storage Manager RAID Option ROM must be on the platform 3. Intel(R) Rapid Storage Manager drivers, most recent revision. 4. At least two SATA hard disk drives (minimum depends on RAID configuration). Intel(R) Rapid Storage Technology is not available in the following configurations: 1. The SATA controller is in compatible mode. 5.16.6.1 Intel(R) Rapid Storage Manager RAID Option ROM The Intel(R) Rapid Storage Manager RAID Option ROM is a standard PnP Option ROM that is easily integrated into any System BIOS. When in place, it provides the following three primary functions: * Provides a text mode user interface that allows the user to manage the RAID configuration on the system in a pre-operating system environment. Its feature set is kept simple to keep size to a minimum, but allows the user to create & delete RAID volumes and select recovery options when problems occur. * Provides boot support when using a RAID volume as a boot disk. It does this by providing Int13 services when a RAID volume needs to be accessed by DOS applications (such as NTLDR) and by exporting the RAID volumes to the System BIOS for selection in the boot order. * At each boot up, provides the user with a status of the RAID volumes and the option to enter the user interface by pressing CTRL-I. 5.16.7 Power Management Operation Power management of the PCH SATA controller and ports will cover operations of the host controller and the SATA wire. 5.16.7.1 Power State Mappings The D0 PCI power management state for device is supported by the PCH SATA controller. SATA devices may also have multiple power states. From parallel ATA, three device states are supported through ACPI. They are: * D0 - Device is working and instantly available. * D1 - Device enters when it receives a STANDBY IMMEDIATE command. Exit latency from this state is in seconds. * D3 - From the SATA device's perspective, no different than a D1 state, in that it is entered using the STANDBY IMMEDIATE command. However, an ACPI method is also called which will reset the device and then cut its power. Each of these device states are subsets of the host controller's D0 state. 204 Datasheet Functional Description Finally, SATA defines three PHY layer power states, which have no equivalent mappings to parallel ATA. They are: * PHY READY - PHY logic and PLL are both on and active. * Partial - PHY logic is powered, but in a reduced state. Exit latency is no longer than 10 ns. * Slumber - PHY logic is powered, but in a reduced state. Exit latency can be up to 10 ms. Since these states have much lower exit latency than the ACPI D1 and D3 states, the SATA controller defines these states as sub-states of the device D0 state. 5.16.7.2 Power State Transitions 5.16.7.2.1 Partial and Slumber State Entry/Exit The partial and slumber states save interface power when the interface is idle. It would be most analogous to PCI CLKRUN# (in power savings, not in mechanism), where the interface can have power saved while no commands are pending. The SATA controller defines PHY layer power management (as performed using primitives) as a driver operation from the host side, and a device proprietary mechanism on the device side. The SATA controller accepts device transition types, but does not issue any transitions as a host. All received requests from a SATA device will be ACKed. When an operation is performed to the SATA controller such that it needs to use the SATA cable, the controller must check whether the link is in the Partial or Slumber states, and if so, must issue a COM_WAKE to bring the link back online. Similarly, the SATA device must perform the same action. 5.16.7.2.2 Device D1, D3 States These states are entered after some period of time when software has determined that no commands will be sent to this device for some time. The mechanism for putting a device in these states does not involve any work on the host controller, other then sending commands over the interface to the device. The command most likely to be used in ATA/ATAPI is the "STANDBY IMMEDIATE" command. 5.16.7.2.3 Host Controller D3HOT State After the interface and device have been put into a low power state, the SATA host controller may be put into a low power state. This is performed using the PCI power management registers in configuration space. There are two very important aspects to note when using PCI power management. 1. When the power state is D3, only accesses to configuration space are allowed. Any attempt to access the memory or I/O spaces will result in master abort. 2. When the power state is D3, no interrupts may be generated, even if they are enabled. If an interrupt status bit is pending when the controller transitions to D0, an interrupt may be generated. When the controller is put into D3, it is assumed that software has properly shut down the device and disabled the ports. Therefore, there is no need to sustain any values on the port wires. The interface will be treated as if no device is present on the cable, and power will be minimized. When returning from a D3 state, an internal reset will not be performed. Datasheet 205 Functional Description 5.16.7.2.4 Non-AHCI Mode PME# Generation When in non-AHCI mode (legacy mode) of operation, the SATA controller does not generate PME#. This includes attach events (since the port must be disabled), or interlock switch events (using the SATAGP pins). 5.16.7.3 SMI Trapping (APM) Device 31:Function2:Offset C0h (see Section 14.1.42) contain control for generating SMI# on accesses to the IDE I/O spaces. These bits map to the legacy ranges (1F0-1F7h, 3F6h, 170-177h, and 376h) and native IDE ranges defined by PCMDBA, PCTLBA, SCMDBA an SCTLBA. If the SATA controller is in legacy mode and is using these addresses, accesses to one of these ranges with the appropriate bit set causes the cycle to not be forwarded to the SATA controller, and for an SMI# to be generated. If an access to the Bus-Master IDE registers occurs while trapping is enabled for the device being accessed, then the register is updated, an SMI# is generated, and the device activity status bits (Section 14.1.43) are updated indicating that a trap occurred. 5.16.8 SATA Device Presence In legacy mode, the SATA controller does not generate interrupts based on hot plug/ unplug events. However, the SATA PHY does know when a device is connected (if not in a partial or slumber state), and it s beneficial to communicate this information to host software as this will greatly reduce boot times and resume times. The flow used to indicate SATA device presence is shown in Figure 5-8. The `PxE' bit refers to PCS.P[3:0]E bits, depending on the port being checked and the `PxP' bits refer to the PCS.P[3:0]P bits, depending on the port being checked. If the PCS/PxP bit is set a device is present, if the bit is cleared a device is not present. If a port is disabled, software can check to see if a new device is connected by periodically re-enabling the port and observing if a device is present, if a device is not present it can disable the port and check again later. If a port remains enabled, software can periodically poll PCS.PxP to see if a new device is connected. Figure 5-8. 206 Flow for Port Enable / Device Present Bits Datasheet Functional Description 5.16.9 SATA LED The SATALED# output is driven whenever the BSY bit is set in any SATA port. The SATALED# is an active-low open-drain output. When SATALED# is low, the LED should be active. When SATALED# is high, the LED should be inactive. 5.16.10 AHCI Operation The PCH provides hardware support for Advanced Host Controller Interface (AHCI), a programming interface for SATA host controllers developed through a joint industry effort. AHCI defines transactions between the SATA controller and software and enables advanced performance and usability with SATA. Platforms supporting AHCI may take advantage of performance features such as no master/slave designation for SATA devices--each device is treated as a master--and hardware assisted native command queuing. AHCI also provides usability enhancements such as Hot-Plug. AHCI requires appropriate software support (such as, an AHCI driver) and for some features, hardware support in the SATA device or additional platform hardware. The PCH supports all of the mandatory features of the Serial ATA Advanced Host Controller Interface Specification, Revision 1.2 and many optional features, such as hardware assisted native command queuing, aggressive power management, LED indicator support, and Hot-Plug through the use of interlock switch support (additional platform hardware and software may be required depending upon the implementation). Note: For reliable device removal notification while in AHCI operation without the use of interlock switches (surprise removal), interface power management should be disabled for the associated port. See Section 7.3.1 of the AHCI Specification for more information. 5.16.11 SGPIO Signals The SGPIO signals, in accordance to the SFF-8485 specification, support per-port LED signaling. These signals are not related to SATALED#, which allows for simplified indication of SATA command activity. The SGPIO group interfaces with an external controller chip that fetches and serializes the data for driving across the SGPIO bus. The output signals then control the LEDs. This feature is only valid in AHCI/RAID mode. Note: Intel does not validate all possible usage cases of this feature. Customers should validate their specific design implementation on their own platforms. 5.16.11.1 Mechanism The enclosure management for SATA Controller 1 (Device 31: Function 2) involves sending messages that control LEDs in the enclosure. The messages for this function are stored after the normal registers in the AHCI BAR, at Offset 580h bytes for the PCH from the beginning of the AHCI BAR as specified by the EM_LOC global register (Section 14.4.1.8). Software creates messages for transmission in the enclosure management message buffer. The data in the message buffer should not be changed if CTL.TM bit is set by software to transmit an update message. Software should only update the message buffer when CTL.TM bit is cleared by hardware otherwise the message transmitted will be indeterminate. Software then writes a register to cause hardware to transmit the message or take appropriate action based on the message content. The software should only create message types supported by the controller, which is LED messages for the PCH. If the software creates other non LED message types (such as, SAF-TE, SES-2), the SGPIO interface may hang and the result is indeterminate. Datasheet 207 Functional Description During reset all SGPIO pins will be in tri-state. The interface will continue to be in tristate after reset until the first transmission occurs when software programs the message buffer and sets the transmit bit CTL.TM. The SATA Host controller will initiate the transmission by driving SCLOCK and at the same time drive the SLOAD to `0' prior to the actual bit stream transmission. The Host will drive SLOAD low for at least 5 SCLOCK then only start the bit stream by driving the SLOAD to high. SLOAD will be driven high for 1 SCLOCK follow by vendor specific pattern that is default to "0000" if software has yet to program the value. A total of 21-bit stream from 7 ports (Port0, Port1, Port2, Port3, Port4 Port5 and Port6) of 3-bit per port LED message will be transmitted on SDATAOUT0 pin after the SLOAD is driven high for 1 SCLOCK. Only 3 ports (Port4, Port5 and Port6) of 9 bit total LED message follow by 12 bits of tri-state value will be transmitted out on SDATAOUT1 pin. All the default LED message values will be high prior to software setting them, except the Activity LED message that is configured to be hardware driven that will be generated based on the activity from the respective port. All the LED message values will be driven to `1' for the port that is unimplemented as indicated in the Port Implemented register regardless of the software programmed value through the message buffer. There are 2 different ways of resetting the PCH's SGPIO interface, asynchronous reset and synchronous reset. Asynchronous reset is caused by platform reset to cause the SGPIO interface to be tri-state asynchronously. Synchronous reset is caused by setting the CTL.RESET bit, clearing the GHC.AE bit or HBA reset, where Host Controller will complete the existing full bit stream transmission then only tri-state all the SGPIO pins. After the reset, both synchronous and asynchronous, the SGPIO pins will stay tristated. Note: The PCH Host Controller does not ensure that it will cause the target SGPIO device or controller to be reset. Software is responsible to keep the PCH SGPIO interface in tristate for 2 second to cause a reset on the target of the SGPIO interface. 5.16.11.2 Message Format Messages shall be constructed with a one DWord header that describes the message to be sent followed by the actual message contents. The first DWord shall be constructed as follows: Bit 31:28 Description Reserved Message Type (MTYPE): Specifies the type of the message. The message types are: 27:24 0h 1h 2h 3h = = = = LED SAF-TE SES-2 SGPIO (register based interface) All other values reserved 23:16 Data Size (DSIZE): Specifies the data size in bytes. If the message (enclosure services command) has a data buffer that is associated with it that is transferred, the size of that data buffer is specified in this field. If there is no separate data buffer, this field shall have a value of `0'. The data directly follows the message in the message buffer. For the PCH, this value should always be `0'. 15:8 Message Size (MSIZE): Specifies the size of the message in bytes. The message size does not include the one DWord header. A value of `0' is invalid. For the PCH, the message size is always 4 bytes. 7:0 208 Reserved Datasheet Functional Description The SAF-TE, SES-2, and SGPIO message formats are defined in the corresponding specifications, respectively. The LED message type is defined in Section 5.16.11.3. It is the responsibility of software to ensure the content of the message format is correct. If the message type is not programmed as 'LED' for this controller, the controller shall not take any action to update its LEDs. Note that for LED message type, the message size is always consisted of 4 bytes. 5.16.11.3 LED Message Type The LED message type specifies the status of up to three LEDs. Typically, the usage for these LEDs is activity, fault, and locate. Not all implementations necessarily contain all LEDs (for example, some implementations may not have a locate LED). The message identifies the HBA port number and the Port Multiplier port number that the slot status applies to. If a Port Multiplier is not in use with a particular device, the Port Multiplier port number shall be `0'. The format of the LED message type is defined in Table 5-37. The LEDs shall retain their values until there is a following update for that particular slot. Table 5-37. Multi-activity LED message type Byte Description Value (VAL): This field describes the state of each LED for a particular location. There are three LEDs that may be supported by the HBA. Each LED has 3 bits of control. LED values are: 000b - LED shall be off 001b - LED shall be solid on as perceived by human eye All other values reserved The LED bit locations are: Bits 2:0 - Activity LED (may be driven by hardware) Bits 5:3 - Vendor Specific LED (such as, locate) 3-2 Bits 8:6 - Vendor Specific LED (such as, fault) Bits 15:9 - Reserved Vendor specific message is: Bit 3:0 - Vendor Specific Pattern Bit 15:4 - Reserved NOTE: If Activity LED Hardware Driven (ATTR.ALHD) bit is set, host will output the hardware LED value sampled internally and will ignore software written activity value on bit [2:0]. Since the PCH Enclosure Management does not support port multiplier based LED message, the LED message will be generated independently based on respective port's operation activity. Vendor specific LED values Locate (Bits 5:3) and Fault (Bits 8:6) always are driven by software. 1 Port Multiplier Information: Specifies slot specific information related to Port Multiplier. Bits 3:0 specify the Port Multiplier port number for the slot that requires the status update. If a Port Multiplier is not attached to the device in the affected slot, the Port Multiplier port number shall be '0'. Bits 7:4 are reserved. The PCH does not support LED messages for devices behind a Port Multiplier. This byte should be 0. HBA Information: Specifies slot specific information related to the HBA. 0 Bits 4:0 - HBA port number for the slot that requires the status update. Bit 5 - If set to '1', value is a vendor specific message that applies to the entire enclosure. If cleared to '0', value applies to the port specified in bits 4:0. Bits 7:6 - Reserved Datasheet 209 Functional Description 5.16.11.4 SGPIO Waveform Figure 5-9. Serial Data transmitted over the SGPIO Interface 210 Datasheet Functional Description 5.16.12 External SATA The PCH supports external SATA. External SATA uses the SATA interface outside of the system box. The usage model for this feature must comply with the Serial ATA II Cables and Connectors Volume 2 Gold specification at www.sata-io.org. Intel validates two configurations: 1. The cable-up solution involves an internal SATA cable that connects to the SATA motherboard connector and spans to a back panel PCI bracket with an eSATA connector. A separate eSATA cable is required to connect an eSATA device. 2. The back-panel solution involves running a trace to the I/O back panel and connecting a device using an external SATA connector on the board. 5.17 High Precision Event Timers This function provides a set of timers that can be used by the operating system. The timers are defined such that in the future, the operating system may be able to assign specific timers to used directly by specific applications. Each timer can be configured to cause a separate interrupt. The PCH provides eight timers. The timers are implemented as a single counter, each with its own comparator and value register. This counter increases monotonically. Each individual timer can generate an interrupt when the value in its value register matches the value in the main counter. The registers associated with these timers are mapped to a memory space (much like the I/O APIC). However, it is not implemented as a standard PCI function. The BIOS reports to the operating system the location of the register space. The hardware can support an assignable decode space; however, the BIOS sets this space prior to handing it over to the operating system. It is not expected that the operating system will move the location of these timers once it is set by the BIOS. 5.17.1 Timer Accuracy 1. The timers are accurate over any 1 ms period to within 0.05% of the time specified in the timer resolution fields. 2. Within any 100 microsecond period, the timer reports a time that is up to two ticks too early or too late. Each tick is less than or equal to 100 ns, so this represents an error of less than 0.2%. 3. The timer is monotonic. It does not return the same value on two consecutive reads (unless the counter has rolled over and reached the same value). The main counter is clocked by the 14.31818 MHz clock, synchronized into the 66.666 MHz domain. This results in a non-uniform duty cycle on the synchronized clock, but does have the correct average period. The accuracy of the main counter is as accurate as the 14.31818 MHz clock. Datasheet 211 Functional Description 5.17.2 Interrupt Mapping Mapping Option #1 (Legacy Replacement Option) In this case, the Legacy Replacement Rout bit (LEG_RT_CNF) is set. This forces the mapping found in Table 5-38. Table 5-38. Legacy Replacement Routing Timer 8259 Mapping APIC Mapping Comment 0 IRQ0 IRQ2 In this case, the 8254 timer will not cause any interrupts 1 IRQ8 IRQ8 In this case, the RTC will not cause any interrupts. 2&3 Per IRQ Routing Field. Per IRQ Routing Field 4, 5, 6, 7 not available not available NOTE: The Legacy Option does not preclude delivery of IRQ0/IRQ8 using direct FSB interrupt messages. Mapping Option #2 (Standard Option) In this case, the Legacy Replacement Rout bit (LEG_RT_CNF) is 0. Each timer has its own routing control. The interrupts can be routed to various interrupts in the 8259 or I/O APIC. A capabilities field indicates which interrupts are valid options for routing. If a timer is set for edge-triggered mode, the timers should not be share with any PCI interrupts. For the PCH, the only supported interrupt values are as follows: Timer 0 and 1: IRQ20, 21, 22 & 23 (I/O APIC only). Timer 2: IRQ11 (8259 or I/O APIC) and IRQ20, 21, 22 & 23 (I/O APIC only). Timer 3: IRQ12 (8259 or I/O APIC) and IRQ 20, 21, 22 & 23 (I/O APIC only). Interrupts from Timer 4, 5, 6, 7 can only be delivered using direct FSB interrupt messages. 5.17.3 Periodic vs. Non-Periodic Modes Non-Periodic Mode Timer 0 is configurable to 32 (default) or 64-bit mode, whereas Timers 1, 2 and 3 only support 32-bit mode (See Section 20.1.5). All of the timers support non-periodic mode. See Section 2.3.9.2.1 of the IA-PC HPET Specification for a description of this mode. 212 Datasheet Functional Description Periodic Mode Timer 0 is the only timer that supports periodic mode. See Section 2.3.9.2.2 of the IAPC HPET Specification for a description of this mode. The following usage model is expected: 1. Software clears the ENABLE_CNF bit to prevent any interrupts. 2. Software Clears the main counter by writing a value of 00h to it. 3. Software sets the TIMER0_VAL_SET_CNF bit. 4. Software writes the new value in the TIMER0_COMPARATOR_VAL register. 5. Software sets the ENABLE_CNF bit to enable interrupts. The Timer 0 Comparator Value register cannot be programmed reliably by a single 64-bit write in a 32-bit environment except if only the periodic rate is being changed during run-time. If the actual Timer 0 Comparator Value needs to be reinitialized, then the following software solution will always work regardless of the environment: 1. Set TIMER0_VAL_SET_CNF bit. 2. Set the lower 32 bits of the Timer0 Comparator Value register. 3. Set TIMER0_VAL_SET_CNF bit. 4. Set the upper 32 bits of the Timer0 Comparator Value register. 5.17.4 Enabling the Timers The BIOS or operating system PnP code should route the interrupts. This includes the Legacy Rout bit, Interrupt Rout bit (for each timer), interrupt type (to select the edge or level type for each timer) The Device Driver code should do the following for an available timer: 1. Set the Overall Enable bit (Offset 10h, bit 0). 2. Set the timer type field (selects one-shot or periodic). 3. Set the interrupt enable. 4. Set the comparator value. 5.17.5 Interrupt Levels Interrupts directed to the internal 8259s are active high. See Section 5.9 for information regarding the polarity programming of the I/O APIC for detecting internal interrupts. If the interrupts are mapped to the 8259 or I/O APIC and set for level-triggered mode, they can be shared with PCI interrupts. They may be shared although it's unlikely for the operating system to attempt to do this. If more than one timer is configured to share the same IRQ (using the TIMERn_INT_ROUT_CNF fields), then the software must configure the timers to leveltriggered mode. Edge-triggered interrupts cannot be shared. Datasheet 213 Functional Description 5.17.6 Handling Interrupts If each timer has a unique interrupt and the timer has been configured for edgetriggered mode, then there are no specific steps required. No read is required to process the interrupt. If a timer has been configured to level-triggered mode, then its interrupt must be cleared by the software. This is done by reading the interrupt status register and writing a 1 back to the bit position for the interrupt to be cleared. Independent of the mode, software can read the value in the main counter to see how time has passed between when the interrupt was generated and when it was first serviced. If Timer 0 is set up to generate a periodic interrupt, the software can check to see how much time remains until the next interrupt by checking the timer value register. 5.17.7 Issues Related to 64-Bit Timers with 32-Bit Processors A 32-bit timer can be read directly using processors that are capable of 32-bit or 64-bit instructions. However, a 32-bit processor may not be able to directly read 64-bit timer. A race condition comes up if a 32-bit processor reads the 64-bit register using two separate 32-bit reads. The danger is that just after reading one half, the other half rolls over and changes the first half. If a 32-bit processor needs to access a 64-bit timer, it must first halt the timer before reading both the upper and lower 32-bits of the timer. If a 32-bit processor does not want to halt the timer, it can use the 64-bit timer as a 32-bit timer by setting the TIMERn_32MODE_CNF bit. This causes the timer to behave as a 32-bit timer. The upper 32-bits are always 0. Alternatively, software may do a multiple read of the counter while it is running. Software can read the high 32 bits, then the low 32 bits, the high 32 bits again. If the high 32 bits have not changed between the two reads, then a rollover has not happened and the low 32 bits are valid. If the high 32 bits have changed between reads, then the multiple reads are repeated until a valid read is performed. Note: 214 On a 64-bit platform, if software attempts a 64 bit read of the 64-bit counter, software must be aware that some platforms may split the 64 bit read into two 32 bit reads. The read maybe inaccurate if the low 32 bits roll over between the high and low reads. Datasheet Functional Description 5.18 USB EHCI Host Controllers (D29:F0 and D26:F0) The PCH contains two Enhanced Host Controller Interface (EHCI) host controllers which support up to fourteen USB 2.0 high-speed root ports. USB 2.0 allows data transfers up to 480 Mb/s. USB 2.0 based Debug Port is also implemented in the PCH. 5.18.1 EHC Initialization The following descriptions step through the expected PCH Enhanced Host Controller (EHC) initialization sequence in chronological order, beginning with a complete power cycle in which the suspend well and core well have been off. 5.18.1.1 BIOS Initialization BIOS performs a number of platform customization steps after the core well has powered up. Contact your Intel Field Representative for additional PCH BIOS information. 5.18.1.2 Driver Initialization See Chapter 4 of the Enhanced Host Controller Interface Specification for Universal Serial Bus, Revision 1.0. 5.18.1.3 EHC Resets In addition to the standard PCH hardware resets, portions of the EHC are reset by the HCRESET bit and the transition from the D3HOT device power management state to the D0 state. The effects of each of these resets are: Reset Does Reset HCRESET bit set. Memory space registers except Structural Parameters (which is written by BIOS). Software writes the Device Power State from D3HOT (11b) to D0 (00b). Core well registers (except BIOSprogrammed registers). Does not Reset Comments Configuration registers. The HCRESET must only affect registers that the EHCI driver controls. PCI Configuration space and BIOS-programmed parameters can not be reset. Suspend well registers; BIOSprogrammed core well registers. The D3-to-D0 transition must not cause wake information (suspend well) to be lost. It also must not clear BIOSprogrammed registers because BIOS may not be invoked following the D3-to-D0 transition. If the detailed register descriptions give exceptions to these rules, those exceptions override these rules. This summary is provided to help explain the reasons for the reset policies. 5.18.2 Data Structures in Main Memory See Section 3 and Appendix B of the Enhanced Host Controller Interface Specification for Universal Serial Bus, Revision 1.0 for details. Datasheet 215 Functional Description 5.18.3 USB 2.0 Enhanced Host Controller DMA The PCH USB 2.0 EHC implements three sources of USB packets. They are, in order of priority on USB during each microframe: 1. The USB 2.0 Debug Port (see Section USB 2.0 Based Debug Port), 2. The Periodic DMA engine, and 3. The Asynchronous DMA engine. The PCH always performs any currently-pending debug port transaction at the beginning of a microframe, followed by any pending periodic traffic for the current microframe. If there is time left in the microframe, then the EHC performs any pending asynchronous traffic until the end of the microframe (EOF1). Note that the debug port traffic is only presented on Port #1 and Port #9, while the other ports are idle during this time. 5.18.4 Data Encoding and Bit Stuffing See Chapter 8 of the Universal Serial Bus Specification, Revision 2.0. 5.18.5 Packet Formats See Chapter 8 of the Universal Serial Bus Specification, Revision 2.0. The PCH EHCI allows entrance to USB test modes, as defined in the USB 2.0 specification, including Test J, Test Packet, etc. However note that the PCH Test Packet test mode interpacket gap timing may not meet the USB 2.0 specification. 5.18.6 USB 2.0 Interrupts and Error Conditions Section 4 of the Enhanced Host Controller Interface Specification for Universal Serial Bus, Revision 1.0 goes into detail on the EHC interrupts and the error conditions that cause them. All error conditions that the EHC detects can be reported through the EHCI Interrupt status bits. Only PCH-specific interrupt and error-reporting behavior is documented in this section. The EHCI Interrupts Section must be read first, followed by this section of the datasheet to fully comprehend the EHC interrupt and error-reporting functionality. * Based on the EHC Buffer sizes and buffer management policies, the Data Buffer Error can never occur on the PCH. * Master Abort and Target Abort responses from hub interface on EHC-initiated read packets will be treated as Fatal Host Errors. The EHC halts when these conditions are encountered. * The PCH may assert the interrupts which are based on the interrupt threshold as soon as the status for the last complete transaction in the interrupt interval has been posted in the internal write buffers. The requirement in the Enhanced Host Controller Interface Specification for Universal Serial Bus, Revision 1.0 (that the status is written to memory) is met internally, even though the write may not be seen on DMI before the interrupt is asserted. * Since the PCH supports the 1024-element Frame List size, the Frame List Rollover interrupt occurs every 1024 milliseconds. * The PCH delivers interrupts using PIRQH#. * The PCH does not modify the CERR count on an Interrupt IN when the "Do Complete-Split" execution criteria are not met. * For complete-split transactions in the Periodic list, the "Missed Microframe" bit does not get set on a control-structure-fetch that fails the late-start test. If subsequent accesses to that control structure do not fail the late-start test, then the "Missed Microframe" bit will get set and written back. 216 Datasheet Functional Description 5.18.6.1 Aborts on USB 2.0-Initiated Memory Reads If a read initiated by the EHC is aborted, the EHC treats it as a fatal host error. The following actions are taken when this occurs: * The Host System Error status bit is set. * The DMA engines are halted after completing up to one more transaction on the USB interface. * If enabled (by the Host System Error Enable), then an interrupt is generated. * If the status is Master Abort, then the Received Master Abort bit in configuration space is set. * If the status is Target Abort, then the Received Target Abort bit in configuration space is set. * If enabled (by the SERR Enable bit in the function's configuration space), then the Signaled System Error bit in configuration bit is set. 5.18.7 USB 2.0 Power Management 5.18.7.1 Pause Feature This feature allows platforms to dynamically enter low-power states during brief periods when the system is idle (that is, between keystrokes). This is useful for enabling power management features in the PCH. The policies for entering these states typically are based on the recent history of system bus activity to incrementally enter deeper power management states. Normally, when the EHC is enabled, it regularly accesses main memory while traversing the DMA schedules looking for work to do; this activity is viewed by the power management software as a non-idle system, thus preventing the power managed states to be entered. Suspending all of the enabled ports can prevent the memory accesses from occurring, but there is an inherent latency overhead with entering and exiting the suspended state on the USB ports that makes this unacceptable for the purpose of dynamic power management. As a result, the EHCI software drivers are allowed to pause the EHC DMA engines when it knows that the traffic patterns of the attached devices can afford the delay. The pause only prevents the EHC from generating memory accesses; the SOF packets continue to be generated on the USB ports (unlike the suspended state). 5.18.7.2 Suspend Feature The Enhanced Host Controller Interface (EHCI) For Universal Serial Bus Specification, Section 4.3 describes the details of Port Suspend and Resume. Datasheet 217 Functional Description 5.18.7.3 ACPI Device States The USB 2.0 function only supports the D0 and D3 PCI Power Management states. Notes regarding the PCH implementation of the Device States: 1. The EHC hardware does not inherently consume any more power when it is in the D0 state than it does in the D3 state. However, software is required to suspend or disable all ports prior to entering the D3 state such that the maximum power consumption is reduced. 2. In the D0 state, all implemented EHC features are enabled. 3. In the D3 state, accesses to the EHC memory-mapped I/O range will master abort. Note that, since the Debug Port uses the same memory range, the Debug Port is only operational when the EHC is in the D0 state. 4. In the D3 state, the EHC interrupt must never assert for any reason. The internal PME# signal is used to signal wake events, etc. 5. When the Device Power State field is written to D0 from D3, an internal reset is generated. See section EHC Resets for general rules on the effects of this reset. 6. Attempts to write any other value into the Device Power State field other than 00b (D0 state) and 11b (D3 state) will complete normally without changing the current value in this field. 5.18.7.4 ACPI System States The EHC behavior as it relates to other power management states in the system is summarized in the following list: * The System is always in the S0 state when the EHC is in the D0 state. However, when the EHC is in the D3 state, the system may be in any power management state (including S0). * When in D0, the Pause feature (See Section 5.18.7.1) enables dynamic processor low-power states to be entered. * The PLL in the EHC is disabled when entering the S3/S4/S5 states (core power turns off). * All core well logic is reset in the S3/S4/S5 states. 5.18.8 USB 2.0 Legacy Keyboard Operation The PCH must support the possibility of a keyboard downstream from either a fullspeed/low-speed or a high-speed port. The description of the legacy keyboard support is unchanged from USB 1.1. The EHC provides the basic ability to generate SMIs on an interrupt event, along with more sophisticated control of the generation of SMIs. 218 Datasheet Functional Description 5.18.9 USB 2.0 Based Debug Port The PCH supports the elimination of the legacy COM ports by providing the ability for new debugger software to interact with devices on a USB 2.0 port. High-level restrictions and features are: * * * * Operational before USB 2.0 drivers are loaded. Functions even when the port is disabled. Allows normal system USB 2.0 traffic in a system that may only have one USB port. Debug Port device (DPD) must be high-speed capable and connect directly to Port 1 and Port 9 on PCH-based systems (such as, the DPD cannot be connected to Port 1/Port 9 through a hub. When a DPD is detected the PCH EHCI will bypass the integrated Rate Matching Hub and connect directly to the port and the DPD.). * Debug Port FIFO always makes forward progress (a bad status on USB is simply presented back to software). * The Debug Port FIFO is only given one USB access per microframe. The Debug port facilitates operating system and device driver debug. It allows the software to communicate with an external console using a USB 2.0 connection. Because the interface to this link does not go through the normal USB 2.0 stack, it allows communication with the external console during cases where the operating system is not loaded, the USB 2.0 software is broken, or where the USB 2.0 software is being debugged. Specific features of this implementation of a debug port are: * Only works with an external USB 2.0 debug device (console). * Implemented for a specific port on the host controller. * Operational anytime the port is not suspended AND the host controller is in D0 power state. * Capability is interrupted when port is driving USB RESET. 5.18.9.1 Theory of Operation There are two operational modes for the USB debug port: 1. Mode 1 is when the USB port is in a disabled state from the viewpoint of a standard host controller driver. In Mode 1, the Debug Port controller is required to generate a "keepalive" packets less than 2 ms apart to keep the attached debug device from suspending. The keepalive packet should be a standalone 32-bit SYNC field. 2. Mode 2 is when the host controller is running (that is, host controller's Run/Stop# bit is 1). In Mode 2, the normal transmission of SOF packets will keep the debug device from suspending. Behavioral Rules 1. In both modes 1 and 2, the Debug Port controller must check for software requested debug transactions at least every 125 microseconds. 2. If the debug port is enabled by the debug driver, and the standard host controller driver resets the USB port, USB debug transactions are held off for the duration of the reset and until after the first SOF is sent. 3. If the standard host controller driver suspends the USB port, then USB debug transactions are held off for the duration of the suspend/resume sequence and until after the first SOF is sent. 4. The ENABLED_CNT bit in the debug register space is independent of the similar port control bit in the associated Port Status and Control register. Datasheet 219 Functional Description Table 5-39 shows the debug port behavior related to the state of bits in the debug registers as well as bits in the associated Port Status and Control register. Table 5-39. Debug Port Behavior OWNER_CNT ENABLED_CT Port Enable Run / Stop Suspend Debug Port Behavior 0 X X X X Debug port is not being used. Normal operation. 1 0 X X X Debug port is not being used. Normal operation. 1 1 0 0 X Debug port in Mode 1. SYNC keepalives sent plus debug traffic X Debug port in Mode 2. SOF (and only SOF) is sent as keepalive. Debug traffic is also sent. Note that no other normal traffic is sent out this port, because the port is not enabled. 1 220 1 0 1 1 1 1 0 0 Invalid. Host controller driver should never put controller into this state (enabled, not running and not suspended). 1 1 1 0 1 Port is suspended. No debug traffic sent. 1 1 1 1 0 Debug port in Mode 2. Debug traffic is interspersed with normal traffic. 1 1 1 1 1 Port is suspended. No debug traffic sent. Datasheet Functional Description 5.18.9.1.1 OUT Transactions An Out transaction sends data to the debug device. It can occur only when the following are true: * The debug port is enabled * The debug software sets the GO_CNT bit * The WRITE_READ#_CNT bit is set The sequence of the transaction is: 1. Software sets the appropriate values in the following bits: -- USB_ADDRESS_CNF -- USB_ENDPOINT_CNF -- DATA_BUFFER[63:0] -- TOKEN_PID_CNT[7:0] -- SEND_PID_CNT[15:8] -- DATA_LEN_CNT -- WRITE_READ#_CNT: (note: this will always be 1 for OUT transactions) -- GO_CNT: (note: this will always be 1 to initiate the transaction) 2. The debug port controller sends a token packet consisting of: -- SYNC -- TOKEN_PID_CNT field -- USB_ADDRESS_CNT field -- USB_ENDPOINT_CNT field -- 5-bit CRC field 3. After sending the token packet, the debug port controller sends a data packet consisting of: -- SYNC -- SEND_PID_CNT field -- The number of data bytes indicated in DATA_LEN_CNT from the DATA_BUFFER -- 16-bit CRC NOTE: A DATA_LEN_CNT value of 0 is valid in which case no data bytes would be included in the packet. 4. After sending the data packet, the controller waits for a handshake response from the debug device: -- If a handshake is received, the debug port controller: a. Places the received PID in the RECEIVED_PID_STS field b. Resets the ERROR_GOOD#_STS bit c. Sets the DONE_STS bit -- If no handshake PID is received, the debug port controller: a. Sets the EXCEPTION_STS field to 001b b. Sets the ERROR_GOOD#_STS bit c. Sets the DONE_STS bit Datasheet 221 Functional Description 5.18.9.1.2 IN Transactions An IN transaction receives data from the debug device. It can occur only when the following are true: * The debug port is enabled * The debug software sets the GO_CNT bit * The WRITE_READ#_CNT bit is reset The sequence of the transaction is: 1. Software sets the appropriate values in the following bits: -- USB_ADDRESS_CNF -- USB_ENDPOINT_CNF -- TOKEN_PID_CNT[7:0] -- DATA_LEN_CNT -- WRITE_READ#_CNT: (note: this will always be 0 for IN transactions) -- GO_CNT: (note: this will always be 1 to initiate the transaction) 2. The debug port controller sends a token packet consisting of: -- SYNC -- TOKEN_PID_CNT field -- USB_ADDRESS_CNT field -- USB_ENDPOINT_CNT field -- 5-bit CRC field. 3. After sending the token packet, the debug port controller waits for a response from the debug device. If a response is received: -- The received PID is placed into the RECEIVED_PID_STS field -- Any subsequent bytes are placed into the DATA_BUFFER -- The DATA_LEN_CNT field is updated to show the number of bytes that were received after the PID. 4. If a valid packet was received from the device that was one byte in length (indicating it was a handshake packet), then the debug port controller: -- Resets the ERROR_GOOD#_STS bit -- Sets the DONE_STS bit 5. If a valid packet was received from the device that was more than one byte in length (indicating it was a data packet), then the debug port controller: -- Transmits an ACK handshake packet -- Resets the ERROR_GOOD#_STS bit -- Sets the DONE_STS bit 6. If no valid packet is received, then the debug port controller: -- Sets the EXCEPTION_STS field to 001b -- Sets the ERROR_GOOD#_STS bit -- Sets the DONE_STS bit. 222 Datasheet Functional Description 5.18.9.1.3 Debug Software Enabling the Debug Port There are two mutually exclusive conditions that debug software must address as part of its startup processing: * The EHCI has been initialized by system software * The EHCI has not been initialized by system software Debug software can determine the current `initialized' state of the EHCI by examining the Configure Flag in the EHCI USB 2.0 Command Register. If this flag is set, then system software has initialized the EHCI. Otherwise, the EHCI should not be considered initialized. Debug software will initialize the debug port registers depending on the state of the EHCI. However, before this can be accomplished, debug software must determine which root USB port is designated as the debug port. Determining the Debug Port Debug software can easily determine which USB root port has been designated as the debug port by examining bits 20:23 of the EHCI Host Controller Structural Parameters register. This 4-bit field represents the numeric value assigned to the debug port (that is, 0001=port 1). Debug Software Startup with Non-Initialized EHCI Debug software can attempt to use the debug port if after setting the OWNER_CNT bit, the Current Connect Status bit in the appropriate (See Determining the Debug Port Presence) PORTSC register is set. If the Current Connect Status bit is not set, then debug software may choose to terminate or it may choose to wait until a device is connected. If a device is connected to the port, then debug software must reset/enable the port. Debug software does this by setting and then clearing the Port Reset bit the PORTSC register. To ensure a successful reset, debug software should wait at least 50 ms before clearing the Port Reset bit. Due to possible delays, this bit may not change to 0 immediately; reset is complete when this bit reads as 0. Software must not continue until this bit reads 0. If a high-speed device is attached, the EHCI will automatically set the Port Enabled/ Disabled bit in the PORTSC register and the debug software can proceed. Debug software should set the ENABLED_CNT bit in the Debug Port Control/Status register, and then reset (clear) the Port Enabled/Disabled bit in the PORTSC register (so that the system host controller driver does not see an enabled port when it is first loaded). Debug Software Startup with Initialized EHCI Debug software can attempt to use the debug port if the Current Connect Status bit in the appropriate (See Determining the Debug Port) PORTSC register is set. If the Current Connect Status bit is not set, then debug software may choose to terminate or it may choose to wait until a device is connected. If a device is connected, then debug software must set the OWNER_CNT bit and then the ENABLED_CNT bit in the Debug Port Control/Status register. Determining Debug Peripheral Presence After enabling the debug port functionality, debug software can determine if a debug peripheral is attached by attempting to send data to the debug peripheral. If all attempts result in an error (Exception bits in the Debug Port Control/Status register indicates a Transaction Error), then the attached device is not a debug peripheral. If the debug port peripheral is not present, then debug software may choose to terminate or it may choose to wait until a debug peripheral is connected. Datasheet 223 Functional Description 5.18.10 EHCI Caching EHCI Caching is a power management feature in the USB (EHCI) host controllers which enables the controller to execute the schedules entirely in cache and eliminates the need for the DMA engine to access memory when the schedule is idle. EHCI caching allows the processor to maintain longer C-state residency times and provides substantial system power savings. 5.18.11 USB Pre-Fetch Based Pause The Pre-Fetch Based Pause is a power management feature in USB (EHCI) host controllers to ensure maximum C3/C4 processor power state time with C2 popup. This feature applies to the period schedule, and works by allowing the DMA engine to identify periods of idleness and preventing the DMA engine from accessing memory when the periodic schedule is idle. Typically in the presence of periodic devices with multiple millisecond poll periods, the periodic schedule will be idle for several frames between polls. The USB Pre-Fetch Based Pause feature is disabled by setting bit 4 of EHCI Configuration Register Section 16.2.1. 5.18.12 Function Level Reset Support (FLR) The USB EHCI Controllers support the Function Level Reset (FLR) capability. The FLR capability can be used in conjunction with Intel(R) Virtualization Technology. FLR allows an Operating System in a Virtual Machine to have complete control over a device, including its initialization, without interfering with the rest of the platform. The device provides a software interface that enables the Operating System to reset the whole device as if a PCI reset was asserted. 5.18.12.1 FLR Steps 5.18.12.1.1 FLR Initialization 1. A FLR is initiated by software writing a `1' to the Initiate FLR bit. 2. All subsequent requests targeting the Function will not be claimed and will be Master Abort Immediate on the bus. This includes any configuration, I/O or Memory cycles, however, the Function shall continue to accept completions targeting the Function. 5.18.12.1.2 FLR Operation The Function will Reset all configuration, I/O and memory registers of the Function except those indicated otherwise and reset all internal states of the Function to the default or initial condition. 5.18.12.1.3 FLR Completion The Initiate FLR bit is reset (cleared) when the FLR reset is completed. This bit can be used to indicate to the software that the FLR reset is completed. Note: 224 From the time Initiate FLR bit is written to 1, software must wait at least 100 ms before accessing the function. Datasheet Functional Description 5.18.13 USB Overcurrent Protection The PCH has implemented programmable USB Overcurrent signals. The PCH provides a total of 8 overcurrent pins to be shared across the 14 ports. Four overcurrent signals have been allocated to the ports in each USB Device: * OC[3:0]# for Device 29 (Ports 0-7) * OC[7:4]# for Device 26 (Ports 8-13) Each pin is mapped to one or more ports by setting bits in the USBOCM1 and USBOCM2 registers.See Section 10.1.68 and Section 10.1.69. It is system BIOS' responsibility to ensure that each port is mapped to only one over current pin. Operation with more than one overcurrent pin mapped to a port is undefined. It is expected that multiple ports are mapped to a single overcurrent pin, however they should be connected at the port and not at the PCH pin. Shorting these pins together may lead to reduced test capabilities. By default, two ports are routed to each of the OC[6:0]# pins. OC7# is not used by default. NOTES: 1. All USB ports routed out of the package must have Overcurrent protection. It is system BIOS responsibility to ensure all used ports have OC protection. 2. USB Ports that are unused on the system (not routed out from the package) should not have OC pins assigned to them. Datasheet 225 Functional Description 5.19 Integrated USB 2.0 Rate Matching Hub 5.19.1 Overview The PCH has integrated two USB 2.0 Rate Matching Hubs (RMH). One hub is connected to each of the EHCI controllers as shown in the figure below. The Hubs convert low and full-speed traffic into high-speed traffic. When the RMHs are enabled, they will appear to software like an external hub is connected to Port 0 of each EHCI controller. In addition, port 1 of each of the RMHs is muxed with Port 1 of the EHCI controllers and is able to bypass the RMH for use as the Debug Port. The hub operates like any USB 2.0 Discrete Hub and will consume one tier of hubs allowed by the USB 2.0 Spec. section 4.1.1. A maximum of four additional non-root hubs can be supported on any of the PCH USB Ports. The RMH will report the following Vendor ID = 8087h and Product ID = 0020h. Figure 5-10. EHCI with USB 2.0 with Rate Matching Hub 5.19.2 Architecture A hub consists of three components: the Hub Repeater, the Hub Controller, and the Transaction Translator. 1. The Hub Repeater is responsible for connectivity setup and tear-down. It also supports exception handling, such as bus fault detection and recovery and connect/ disconnect detect. 2. The Hub Controller provides the mechanism for host-to-hub communication. Hubspecific status and control commands permit the host to configure a hub and to monitor and control its individual downstream facing ports. 3. The Transaction Translator (TT) responds to high-speed split transactions and translates them to full-/low-speed transactions with full-/low-speed devices attached on downstream facing ports. There is 1 TT per RMH in the PCH. See chapter 11 of the USB 2.0 Specification for more details on the architecture of the hubs. 226 Datasheet Functional Description 5.20 SMBus Controller (D31:F3) The PCH provides an System Management Bus (SMBus) 2.0 host controller as well as an SMBus Slave Interface. The host controller provides a mechanism for the processor to initiate communications with SMBus peripherals (slaves). The PCH is also capable of operating in a mode in which it can communicate with I2C compatible devices. The PCH can perform SMBus messages with either packet error checking (PEC) enabled or disabled. The actual PEC calculation and checking is performed in hardware by the PCH. The Slave Interface allows an external master to read from or write to the PCH. Write cycles can be used to cause certain events or pass messages, and the read cycles can be used to determine the state of various status bits. The PCH's internal host controller cannot access the PCH's internal Slave Interface. The PCH SMBus logic exists in Device 31:Function 3 configuration space, and consists of a transmit data path, and host controller. The transmit data path provides the data flow logic needed to implement the seven different SMBus command protocols and is controlled by the host controller. The PCH's SMBus controller logic is clocked by RTC clock. The SMBus Address Resolution Protocol (ARP) is supported by using the existing host controller commands through software, except for the new Host Notify command (which is actually a received message). The programming model of the host controller is combined into two portions: a PCI configuration portion, and a system I/O mapped portion. All static configuration, such as the I/O base address, is done using the PCI configuration space. Real-time programming of the Host interface is done in system I/O space. The PCH SMBus host controller checks for parity errors as a target. If an error is detected, the detected parity error bit in the PCI Status Register (Device 31:Function 3:Offset 06h:bit 15) is set. If bit 6 and bit 8 of the PCI Command Register (Device 31:Function 3:Offset 04h) are set, an SERR# is generated and the signaled SERR# bit in the PCI Status Register (bit 14) is set. 5.20.1 Host Controller The SMBus host controller is used to send commands to other SMBus slave devices. Software sets up the host controller with an address, command, and, for writes, data and optional PEC; and then tells the controller to start. When the controller has finished transmitting data on writes, or receiving data on reads, it generates an SMI# or interrupt, if enabled. The host controller supports 8 command protocols of the SMBus interface (see System Management Bus (SMBus) Specification, Version 2.0): Quick Command, Send Byte, Receive Byte, Write Byte/Word, Read Byte/Word, Process Call, Block Read/Write, Block Write-Block Read Process Call, and Host Notify. The SMBus host controller requires that the various data and command fields be setup for the type of command to be sent. When software sets the START bit, the SMBus Host controller performs the requested transaction, and interrupts the processor (or generates an SMI#) when the transaction is completed. Once a START command has been issued, the values of the "active registers" (Host Control, Host Command, Transmit Slave Address, Data 0, Data 1) should not be changed or read until the interrupt status message (INTR) has been set (indicating the completion of the command). Any register values needed for computation purposes should be saved prior to issuing of a new command, as the SMBus host controller updates all registers while completing the new command. Datasheet 227 Functional Description The PCH supports the System Management Bus (SMBus) Specification, Version 2.0. Slave functionality, including the Host Notify protocol, is available on the SMBus pins. The SMLink and SMBus signals can be tied together externally depending on TCO mode used. See Section 5.14.2 for more details. Using the SMB host controller to send commands to the PCH SMB slave port is not supported. 5.20.1.1 Command Protocols In all of the following commands, the Host Status Register (offset 00h) is used to determine the progress of the command. While the command is in operation, the HOST_BUSY bit is set. If the command completes successfully, the INTR bit will be set in the Host Status Register. If the device does not respond with an acknowledge, and the transaction times out, the DEV_ERR bit is set. If software sets the KILL bit in the Host Control Register while the command is running, the transaction will stop and the FAILED bit will be set. Quick Command When programmed for a Quick Command, the Transmit Slave Address Register is sent. The PEC byte is never appended to the Quick Protocol. Software should force the PEC_EN bit to 0 when performing the Quick Command. Software must force the I2C_EN bit to 0 when running this command. See section 5.5.1 of the System Management Bus (SMBus) Specification, Version 2.0 for the format of the protocol. Send Byte / Receive Byte For the Send Byte command, the Transmit Slave Address and Device Command Registers are sent. For the Receive Byte command, the Transmit Slave Address Register is sent. The data received is stored in the DATA0 register. Software must force the I2C_EN bit to 0 when running this command. The Receive Byte is similar to a Send Byte, the only difference is the direction of data transfer. See sections 5.5.2 and 5.5.3 of the System Management Bus (SMBus) Specification, Version 2.0 for the format of the protocol. Write Byte/Word The first byte of a Write Byte/Word access is the command code. The next 1 or 2 bytes are the data to be written. When programmed for a Write Byte/Word command, the Transmit Slave Address, Device Command, and Data0 Registers are sent. In addition, the Data1 Register is sent on a Write Word command. Software must force the I2C_EN bit to 0 when running this command. See section 5.5.4 of the System Management Bus (SMBus) Specification, Version 2.0 for the format of the protocol. Read Byte/Word Reading data is slightly more complicated than writing data. First the PCH must write a command to the slave device. Then it must follow that command with a repeated start condition to denote a read from that device's address. The slave then returns 1 or 2 bytes of data. Software must force the I2C_EN bit to 0 when running this command. When programmed for the read byte/word command, the Transmit Slave Address and Device Command Registers are sent. Data is received into the DATA0 on the read byte, and the DAT0 and DATA1 registers on the read word. See section 5.5.5 of the System Management Bus (SMBus) Specification, Version 2.0 for the format of the protocol. 228 Datasheet Functional Description Process Call The process call is so named because a command sends data and waits for the slave to return a value dependent on that data. The protocol is simply a Write Word followed by a Read Word, but without a second command or stop condition. When programmed for the Process Call command, the PCH transmits the Transmit Slave Address, Host Command, DATA0 and DATA1 registers. Data received from the device is stored in the DATA0 and DATA1 registers. The Process Call command with I2C_EN set and the PEC_EN bit set produces undefined results. Software must force either I2C_EN or PEC_EN to 0 when running this command. See section 5.5.6 of the System Management Bus (SMBus) Specification, Version 2.0 for the format of the protocol. Note: For process call command, the value written into bit 0 of the Transmit Slave Address Register (SMB I/O register, offset 04h) needs to be 0. Note: If the I2C_EN bit is set, the protocol sequence changes slightly: the Command Code (bits 18:11 in the bit sequence) are not sent - as a result, the slave will not acknowledge (bit 19 in the sequence). Block Read/Write The PCH contains a 32-byte buffer for read and write data which can be enabled by setting bit 1 of the Auxiliary Control register at offset 0Dh in I/O space, as opposed to a single byte of buffering. This 32-byte buffer is filled with write data before transmission, and filled with read data on reception. In the PCH, the interrupt is generated only after a transmission or reception of 32 bytes, or when the entire byte count has been transmitted/received. Note: When operating in I2C mode (I2C_EN bit is set), the PCH will never use the 32-byte buffer for any block commands. The byte count field is transmitted but ignored by the PCH as software will end the transfer after all bytes it cares about have been sent or received. For a Block Write, software must either force the I2C_EN bit or both the PEC_EN and AAC bits to 0 when running this command. The block write begins with a slave address and a write condition. After the command code the PCH issues a byte count describing how many more bytes will follow in the message. If a slave had 20 bytes to send, the first byte would be the number 20 (14h), followed by 20 bytes of data. The byte count may not be 0. A Block Read or Write is allowed to transfer a maximum of 32 data bytes. When programmed for a block write command, the Transmit Slave Address, Device Command, and Data0 (count) registers are sent. Data is then sent from the Block Data Byte register; the total data sent being the value stored in the Data0 Register. On block read commands, the first byte received is stored in the Data0 register, and the remaining bytes are stored in the Block Data Byte register. See section 5.5.7 of the System Management Bus (SMBus) Specification, Version 2.0 for the format of the protocol. Note: Datasheet For Block Write, if the I2C_EN bit is set, the format of the command changes slightly. The PCH will still send the number of bytes (on writes) or receive the number of bytes (on reads) indicated in the DATA0 register. However, it will not send the contents of the DATA0 register as part of the message. Also, the Block Write protocol sequence changes slightly: the Byte Count (bits 27:20 in the bit sequence) are not sent - as a result, the slave will not acknowledge (bit 28 in the sequence). 229 Functional Description I2C Read This command allows the PCH to perform block reads to certain I2C devices, such as serial E2PROMs. The SMBus Block Read supports the 7-bit addressing mode only. However, this does not allow access to devices using the I2C "Combined Format" that has data bytes after the address. Typically these data bytes correspond to an offset (address) within the serial memory chips. Note: This command is supported independent of the setting of the I2C_EN bit. The I2C Read command with the PEC_EN bit set produces undefined results. Software must force both the PEC_EN and AAC bit to 0 when running this command. For I2C Read command, the value written into bit 0 of the Transmit Slave Address Register (SMB I/O register, offset 04h) needs to be 0. The format that is used for the command is shown in Table 5-40. Table 5-40. I2C Block Read Bit 1 8:2 9 10 18:11 Description Start Slave Address--7 bits Write Acknowledge from slave Send DATA1 register 19 Acknowledge from slave 20 Repeated Start 27:21 Slave Address--7 bits 28 Read 29 Acknowledge from slave 37:30 38 46:39 47 Data byte 1 from slave--8 bits Acknowledge Data byte 2 from slave--8 bits Acknowledge - Data bytes from slave / Acknowledge - Data byte N from slave--8 bits - NOT Acknowledge - Stop The PCH will continue reading data from the peripheral until the NAK is received. 230 Datasheet Functional Description Block Write-Block Read Process Call The block write-block read process call is a two-part message. The call begins with a slave address and a write condition. After the command code the host issues a write byte count (M) that describes how many more bytes will be written in the first part of the message. If a master has 6 bytes to send, the byte count field will have the value 6 (0000 0110b), followed by the 6 bytes of data. The write byte count (M) cannot be 0. The second part of the message is a block of read data beginning with a repeated start condition followed by the slave address and a Read bit. The next byte is the read byte count (N), which may differ from the write byte count (M). The read byte count (N) cannot be 0. The combined data payload must not exceed 32 bytes. The byte length restrictions of this process call are summarized as follows: * M 1 byte * N 1 byte * M + N 32 bytes The read byte count does not include the PEC byte. The PEC is computed on the total message beginning with the first slave address and using the normal PEC computational rules. It is highly recommended that a PEC byte be used with the Block Write-Block Read Process Call. Software must do a read to the command register (offset 2h) to reset the 32 byte buffer pointer prior to reading the block data register. Note that there is no STOP condition before the repeated START condition, and that a NACK signifies the end of the read transfer. Note: E32B bit in the Auxiliary Control register must be set when using this protocol. See section 5.5.8 of the System Management Bus (SMBus) Specification, Version 2.0 for the format of the protocol. 5.20.2 Bus Arbitration Several masters may attempt to get on the bus at the same time by driving the SMBDATA line low to signal a start condition. The PCH continuously monitors the SMBDATA line. When the PCH is attempting to drive the bus to a 1 by letting go of the SMBDATA line, and it samples SMBDATA low, then some other master is driving the bus and the PCH will stop transferring data. If the PCH sees that it has lost arbitration, the condition is called a collision. The PCH will set the BUS_ERR bit in the Host Status Register, and if enabled, generate an interrupt or SMI#. The processor is responsible for restarting the transaction. When the PCH is a SMBus master, it drives the clock. When the PCH is sending address or command as an SMBus master, or data bytes as a master on writes, it drives data relative to the clock it is also driving. It will not start toggling the clock until the start or stop condition meets proper setup and hold time. The PCH will also ensure minimum time between SMBus transactions as a master. Note: Datasheet The PCH supports the same arbitration protocol for both the SMBus and the System Management (SMLink) interfaces. 231 Functional Description 5.20.3 Bus Timing 5.20.3.1 Clock Stretching Some devices may not be able to handle their clock toggling at the rate that the PCH as an SMBus master would like. They have the capability of stretching the low time of the clock. When the PCH attempts to release the clock (allowing the clock to go high), the clock will remain low for an extended period of time. The PCH monitors the SMBus clock line after it releases the bus to determine whether to enable the counter for the high time of the clock. While the bus is still low, the high time counter must not be enabled. Similarly, the low period of the clock can be stretched by an SMBus master if it is not ready to send or receive data. 5.20.3.2 Bus Time Out (The PCH as SMBus Master) If there is an error in the transaction, such that an SMBus device does not signal an acknowledge, or holds the clock lower than the allowed time-out time, the transaction will time out. The PCH will discard the cycle and set the DEV_ERR bit. The time out minimum is 25 ms (800 RTC clocks). The time-out counter inside the PCH will start after the last bit of data is transferred by the PCH and it is waiting for a response. The 25 ms timeout counter will not count under the following conditions: 1. BYTE_DONE_STATUS bit (SMBus I/O Offset 00h, bit 7) is set 2. The SECOND_TO_STS bit (TCO I/O Offset 06h, bit 1) is not set (this indicates that the system has not locked up). 5.20.4 Interrupts / SMI# The PCH SMBus controller uses PIRQB# as its interrupt pin. However, the system can alternatively be set up to generate SMI# instead of an interrupt, by setting the SMBUS_SMI_EN bit (Device 31:Function 0:Offset 40h:bit 1). Table 5-42 and Table 5-43 specify how the various enable bits in the SMBus function control the generation of the interrupt, Host and Slave SMI, and Wake internal signals. The rows in the tables are additive, which means that if more than one row is true for a particular scenario then the Results for all of the activated rows will occur. Table 5-41. Enable for SMBALERT# Event SMBALERT# asserted low (always reported in Host Status Register, Bit 5) 232 INTREN (Host Control I/O Register, Offset 02h, Bit 0) SMB_SMI_EN (Host Configuration Register, D31:F3:Offset 40h, Bit 1) SMBALERT_DIS (Slave Command I/O Register, Offset 11h, Bit 2) X X X Wake generated X 1 0 Slave SMI# generated (SMBUS_SMI_STS) 1 0 0 Interrupt generated Result Datasheet Functional Description Table 5-42. Enables for SMBus Slave Write and SMBus Host Events INTREN (Host Control I/O Register, Offset 02h, Bit 0) Event SMB_SMI_EN (Host Configuration Register, D31:F3:Offset 40h, Bit1) Event Slave Write to Wake/ SMI# Command X X Wake generated when asleep. Slave SMI# generated when awake (SMBUS_SMI_STS). Slave Write to SMLINK_SLAVE_SMI Command X X Slave SMI# generated when in the S0 state (SMBUS_SMI_STS) 0 X None 1 0 Interrupt generated 1 1 Host SMI# generated Any combination of Host Status Register [4:1] asserted Table 5-43. Enables for the Host Notify Command HOST_NOTIFY_INTREN (Slave Control I/O Register, Offset 11h, bit 0) SMB_SMI_EN (Host Config Register, D31:F3:Off40h, Bit 1) HOST_NOTIFY_WKEN (Slave Control I/O Register, Offset 11h, bit 1) 0 X 0 None X X 1 Wake generated 1 0 X Interrupt generated X Slave SMI# generated (SMBUS_SMI_STS) 1 5.20.5 1 Result SMBALERT# SMBALERT# is multiplexed with GPIO[11]. When enable and the signal is asserted, the PCH can generate an interrupt, an SMI#, or a wake event from S1-S5. 5.20.6 SMBus CRC Generation and Checking If the AAC bit is set in the Auxiliary Control register, the PCH automatically calculates and drives CRC at the end of the transmitted packet for write cycles, and will check the CRC for read cycles. It will not transmit the contents of the PEC register for CRC. The PEC bit must not be set in the Host Control register if this bit is set, or unspecified behavior will result. If the read cycle results in a CRC error, the DEV_ERR bit and the CRCE bit in the Auxiliary Status register at offset 0Ch will be set. Datasheet 233 Functional Description 5.20.7 SMBus Slave Interface The PCH SMBus Slave interface is accessed using the SMBus. The SMBus slave logic will not generate or handle receiving the PEC byte and will only act as a Legacy Alerting Protocol device. The slave interface allows the PCH to decode cycles, and allows an external microcontroller to perform specific actions. Key features and capabilities include: * Supports decode of three types of messages: Byte Write, Byte Read, and Host Notify. * Receive Slave Address register: This is the address that the PCH decodes. A default value is provided so that the slave interface can be used without the processor having to program this register. * Receive Slave Data register in the SMBus I/O space that includes the data written by the external microcontroller. * Registers that the external microcontroller can read to get the state of the PCH. * Status bits to indicate that the SMBus slave logic caused an interrupt or SMI# due to the reception of a message that matched the slave address. -- Bit 0 of the Slave Status Register for the Host Notify command -- Bit 16 of the SMI Status Register (Section 13.8.3.9) for all others Note: The external microcontroller should not attempt to access the PCH SMBus slave logic until either: -- 800 milliseconds after both: RTCRST# is high and RSMRST# is high, OR -- The PLTRST# de-asserts If a master leaves the clock and data bits of the SMBus interface at 1 for 50 s or more in the middle of a cycle, the PCH slave logic's behavior is undefined. This is interpreted as an unexpected idle and should be avoided when performing management activities to the slave logic. Note: When an external microcontroller accesses the SMBus Slave Interface over the SMBus a translation in the address is needed to accommodate the least significant bit used for read/write control. For example, if the PCH slave address (RCV_SLVA) is left at 44h (default), the external micro controller would use an address of 88h/89h (write/read). 5.20.7.1 Format of Slave Write Cycle The external master performs Byte Write commands to the PCH SMBus Slave I/F. The "Command" field (bits 11:18) indicate which register is being accessed. The Data field (bits 20:27) indicate the value that should be written to that register. Table 5-44 has the values associated with the registers. Table 5-44. Slave Write Registers (Sheet 1 of 2) Register 0 1-3 234 Function Command Register. See Table 5-45 below for legal values written to this register. Reserved 4 Data Message Byte 0 5 Data Message Byte 1 Datasheet Functional Description Table 5-44. Slave Write Registers (Sheet 2 of 2) Register Function 6-7 Reserved 8 Reserved 9-FFh Reserved NOTE: The external microcontroller is responsible to make sure that it does not update the contents of the data byte registers until they have been read by the system processor. The PCH overwrites the old value with any new value received. A race condition is possible where the new value is being written to the register just at the time it is being read. The PCH will not attempt to cover this race condition (that is, unpredictable results in this case). Table 5-45. Command Types . Command Type 0 Reserved 1 WAKE/SMI#. This command wakes the system if it is not already awake. If system is already awake, an SMI# is generated. NOTE: The SMB_WAK_STS bit will be set by this command, even if the system is already awake. The SMI handler should then clear this bit. 2 Unconditional Powerdown. This command sets the PWRBTNOR_STS bit, and has the same effect as the Powerbutton Override occurring. 3 HARD RESET WITHOUT CYCLING: This command causes a hard reset of the system (does not include cycling of the power supply). This is equivalent to a write to the CF9h register with bits 2:1 set to 1, but bit 3 set to 0. 4 HARD RESET SYSTEM. This command causes a hard reset of the system (including cycling of the power supply). This is equivalent to a write to the CF9h register with bits 3:1 set to 1. 5 Disable the TCO Messages. This command will disable the PCH from sending Heartbeat and Event messages (as described in Section 5.14). Once this command has been executed, Heartbeat and Event message reporting can only be reenabled by assertion and de-assertion of the RSMRST# signal. 6 WD RELOAD: Reload watchdog timer. 7 Reserved 8 SMLINK_SLV_SMI. When the PCH detects this command type while in the S0 state, it sets the SMLINK_SLV_SMI_STS bit (see Section 13.9.5). This command should only be used if the system is in an S0 state. If the message is received during S1-S5 states, the PCH acknowledges it, but the SMLINK_SLV_SMI_STS bit does not get set. NOTE: It is possible that the system transitions out of the S0 state at the same time that the SMLINK_SLV_SMI command is received. In this case, the SMLINK_SLV_SMI_STS bit may get set but not serviced before the system goes to sleep. Once the system returns to S0, the SMI associated with this bit would then be generated. Software must be able to handle this scenario. 9-FFh Datasheet Description Reserved 235 Functional Description 5.20.7.2 Format of Read Command The external master performs Byte Read commands to the PCH SMBus Slave interface. The "Command" field (bits 18:11) indicate which register is being accessed. The Data field (bits 30:37) contain the value that should be read from that register. Table 5-46. Slave Read Cycle Format Bit 1 Description Driven by Comment Start External Microcontroller Slave Address - 7 bits External Microcontroller Must match value in Receive Slave Address register 9 Write External Microcontroller Always 0 10 ACK PCH Command code - 8 bits External Microcontroller 19 ACK PCH 20 Repeated Start External Microcontroller Slave Address - 7 bits External Microcontroller Must match value in Receive Slave Address register 28 Read External Microcontroller Always 1 29 ACK PCH 30-37 Data Byte PCH 38 NOT ACK External Microcontroller 39 Stop External Microcontroller 2-8 11-18 21-27 Indicates which register is being accessed. See Table 5-47 below for list of implemented registers. Value depends on register being accessed. Table 5-47 below for list of implemented registers. Table 5-47. Data Values for Slave Read Registers (Sheet 1 of 2) Register Bits 0 7:0 1 2:0 Description Reserved for capabilities indication. Should always return 00h. Future chips may return another value to indicate different capabilities. System Power State 000 = S0 001 = S1 010 = Reserved 011 = S3 100 = S4 101 = S5 110 = Reserved 111 = Reserved 7:3 2 3 Reserved 7:4 Reserved 5:0 Watchdog Timer current value Note that Watchdog Timer has 10 bits, but this field is only 6 bits. If the current value is greater than 3Fh, the PCH will always report 3Fh in this field. 7:6 4 236 Reserved 3:0 Reserved 0 1 = The Intruder Detect (INTRD_DET) bit is set. This indicates that the system cover has probably been opened. 1 1 = BTI Temperature Event occurred. This bit will be set if the PCH's THRM# input signal is active. Else this beat will read "0." Datasheet Functional Description Table 5-47. Data Values for Slave Read Registers (Sheet 2 of 2) Register Bits Description 2 DOA Processor Status. This bit will be 1 to indicate that the processor is dead 3 1 = SECOND_TO_STS bit set. This bit will be set after the second timeout (SECOND_TO_STS bit) of the Watchdog Timer occurs. 6:4 7 Reserved. Will always be 0, but software should ignore. Reflects the value of the GPIO[11]/SMBALERT# pin (and is dependent upon the value of the GPI_INV[11] bit. If the GPI_INV[11] bit is 1, then the value in this bit equals the level of the GPI[11]/SMBALERT# pin (high = 1, low = 0). If the GPI_INV[11] bit is 0, then the value of this bit will equal the inverse of the level of the GPIO[11]/SMBALERT# pin (high = 0, low = 1). 5 0 FWH bad bit. This bit will be 1 to indicate that the FWH read returned FFh, which indicates that it is probably blank. 1 Reserved 2 CPU Power Failure Status: `1' if the CPUPWR_FLR bit in the GEN_PMCON_2 register is set. 3 INIT3_3V# due to receiving Shutdown message: This event is visible from the reception of the shutdown message until a platform reset is done if the Shutdown Policy Select bit (SPS) is configured to drive INIT3_3V#. When the SPS bit is configured to generate PLTRST# based on shutdown, this register bit will always return 0. Events on signal will not create a event message Datasheet 4 Reserved 5 POWER_OK_BAD: Indicates the failure core power well ramp during boot/resume. This bit will be active if the SLP_S3# pin is de-asserted and PWROK pin is not asserted. 6 Thermal Trip: This bit will shadow the state of processor Thermal Trip status bit (CTS) (16.2.1.2, GEN_PMCON_2, bit 3). Events on signal will not create a event message 7 Reserved: Default value is "X" NOTE: Software should not expect a consistent value when this bit is read through SMBUS/SMLink 6 7:0 Contents of the Message 1 register. See Section 13.9.8 for the description of this register. 7 7:0 Contents of the Message 2 register. See Section 13.9.8 for the description of this register. 8 7:0 Contents of the TCO_WDCNT register. See Section 13.9.9 for the description of this register. 9 7:0 Seconds of the RTC A 7:0 Minutes of the RTC B 7:0 Hours of the RTC C 7:0 "Day of Week" of the RTC D 7:0 "Day of Month" of the RTC E 7:0 Month of the RTC F 7:0 Year of the RTC 10h-FFh 7:0 Reserved 237 Functional Description 5.20.7.2.1 Behavioral Notes According to SMBus protocol, Read and Write messages always begin with a Start bit - Address- Write bit sequence. When the PCH detects that the address matches the value in the Receive Slave Address register, it will assume that the protocol is always followed and ignore the Write bit (bit 9) and signal an Acknowledge during bit 10. In other words, if a Start -Address-Read occurs (which is illegal for SMBus Read or Write protocol), and the address matches the PCH's Slave Address, the PCH will still grab the cycle. Also according to SMBus protocol, a Read cycle contains a Repeated Start-Address-Read sequence beginning at bit 20. Once again, if the Address matches the PCH's Receive Slave Address, it will assume that the protocol is followed, ignore bit 28, and proceed with the Slave Read cycle. Note: An external microcontroller must not attempt to access the PCH's SMBus Slave logic until at least 1 second after both RTCRST# and RSMRST# are de-asserted (high). 5.20.7.3 Slave Read of RTC Time Bytes The PCH SMBus slave interface allows external SMBus master to read the internal RTC's time byte registers. The RTC time bytes are internally latched by the PCH's hardware whenever RTC time is not changing and SMBus is idle. This ensures that the time byte delivered to the slave read is always valid and it does not change when the read is still in progress on the bus. The RTC time will change whenever hardware update is in progress, or there is a software write to the RTC time bytes. The PCH SMBus slave interface only supports Byte Read operation. The external SMBus master will read the RTC time bytes one after another. It is software's responsibility to check and manage the possible time rollover when subsequent time bytes are read. For example, assuming the RTC time is 11 hours: 59 minutes: 59 seconds. When the external SMBus master reads the hour as 11, then proceeds to read the minute, it is possible that the rollover happens between the reads and the minute is read as 0. This results in 11 hours: 0 minute instead of the correct time of 12 hours: 0 minutes. Unless it is certain that rollover will not occur, software is required to detect the possible time rollover by reading multiple times such that the read time bytes can be adjusted accordingly if needed. 5.20.7.4 Format of Host Notify Command The PCH tracks and responds to the standard Host Notify command as specified in the System Management Bus (SMBus) Specification, Version 2.0. The host address for this command is fixed to 0001000b. If the PCH already has data for a previously-received host notify command which has not been serviced yet by the host software (as indicated by the HOST_NOTIFY_STS bit), then it will NACK following the host address byte of the protocol. This allows the host to communicate non-acceptance to the master and retain the host notify address and data values for the previous cycle until host software completely services the interrupt. Note: Host software must always clear the HOST_NOTIFY_STS bit after completing any necessary reads of the address and data registers. Table 5-48 shows the Host Notify format. 238 Datasheet Functional Description Table 5-48. Host Notify Format Bit 1 8:2 9 10 Start Driven By Comment External Master SMB Host Address--7 bits External Master Always 0001_000 Write External Master Always 0 ACK (or NACK) PCH PCH NACKs if HOST_NOTIFY_STS is 1 Device Address - 7 bits External Master Indicates the address of the master; loaded into the Notify Device Address Register 18 Unused--Always 0 External Master 7-bit-only address; this bit is inserted to complete the byte 19 ACK PCH Data Byte Low--8 bits External Master ACK PCH Data Byte High--8 bits External Master 37 ACK PCH 38 Stop External Master 17:11 27:20 28 36:29 Datasheet Description Loaded into the Notify Data Low Byte Register Loaded into the Notify Data High Byte Register 239 Functional Description 5.21 Thermal Management 5.21.1 Thermal Sensor The PCH incorporates one on-die Digital thermal sensor (DTS) for thermal management. The thermal sensor is used for Intel Quiet System Technology (Intel QST). The QST firmware can internally access the temperature measured by the sensors and use the data as a factor to determine how to control the fans. This thermal sensor is located near the DMI interface. The on-die thermal sensor is placed as close as possible to the hottest on-die location to reduce thermal gradients and to reduce the error on the sensor trip thresholds. The thermal Sensor trip points may be programmed to generate various interrupts including SCI, SMI, PCI and other General Purpose events. 5.21.1.1 Internal Thermal Sensor Operation The internal thermal sensor reports four trip points: Aux2, Aux, Hot and Catastrophic trip points in the order of increasing temperature. Aux, Aux2 Temperature Trip Points These trip points may be set dynamically if desired and provides an interrupt to ACPI (or other software) when it is crossed in either direction. These auxiliary temperature trip points do not automatically cause any hardware throttling but may be used by software to trigger interrupts. This trip point is set below the Hot temperature trip point and responses are separately programmable from the hot temperature settings, to provide incrementally more aggressive actions. Aux and Aux2 trip points are fully Software programmable during system run-time. Aux2 trip point is set below the Aux temperature trip point. Hot Temperature Trip Point This trip point may be set dynamically if desired and provides an interrupt to ACPI (or other software) when it is crossed in either direction. Software could optionally set this as an Interrupt when the temperature exceeds this level setting. Hot trip does not provide any default hardware based thermal throttling, and is available only as a customer configurable interrupt when Tj,max has been reached. Catastrophic Trip Point This trip point is set at the temperature at which the PCH must be shut down immediately without any software support. The catastrophic trip point must correspond to a temperature ensured to be functional for the interrupt generation and Hardware response. Hardware response using THERMTRIP# would be an unconditional transition to S5. The catastrophic transition to the S5 state does not enforce a minimum time in the S5 state. It is assumed that the S5 residence and the reboot sequence cools down the system. If the catastrophic condition remains when the catastrophic power down enable bit is set by BIOS, then the system will re-enter S5. Thermometer Mode The thermometer is implemented using a counter that starts at 0 and increments during each sample point until the comparator indicates the temperature is above the current value. The value of the counter is loaded into a read-only register (Thermal Sensor Thermometer Read) when the comparator first trips. 240 Datasheet Functional Description 5.21.1.1.1 Recommended Programming for Available Trip Points There may be a 2 C offset due to thermal gradient between the hot-spot and the location of the thermal sensor. Trip points should be programmed to account for this temperature offset between the hot-spot Tj,max and the thermal sensor. Aux Trip Points should be programmed for software and firmware control using interrupts. Hot Trip Point should be set to throttle at 108 C (Tj,max) due to DTS trim accuracy adjustments. Hot trip points should also be programmed for a software response. Catastrophic Trip Point should be set to halt operation to avoid maximum Tj of about 120 C. Note: Crossing a trip point in either direction may generate several types of interrupts. Each trip point has a register that can be programmed to select the type of interrupt to be generated. Crossing a trip point is implemented as edge detection on each trip point to generate the interrupts. 5.21.1.1.2 Thermal Sensor Accuracy (Taccuracy) Taccuracy for the PCH is 5 C in the temperature range 90 C to 120 C. Taccuracy is 10 C for temperatures from 45 C - 90 C. The PCH may not operate above +108 C. This value is based on product characterization and is not ensured by manufacturing test. Software has the ability to program the Tcat, Thot, and Taux trip points, but these trip points should be selected with consideration for the thermal sensor accuracy and the quality of the platform thermal solution. Overly conservative (unnecessarily low) temperature settings may unnecessarily degrade performance due to frequent throttling, while overly aggressive (dangerously high) temperature settings may fail to protect the part against permanent thermal damage. 5.21.2 Thermal Reporting Over System Management Link 1 Interface (SMLink1) SMLink1 interface in the PCH is the SMBus link to an optional external controller. A SMBus protocol is defined on the PCH to allow compatible devices such as Embedded Controller (EC) or SIO to obtain system thermal data from sensors integrated into components on the system using the SMLink1 interface. The sensors that can be monitored using the SMLink1 include those in the processor, the PCH, and DIMMs with sensors implemented. This solution allows an external device or controller to use the system thermal data for system thermal management. Note: To enable Thermal Reporting, the Thermal Data Reporting enable and processor/PCH/ DIMM temperature read enables have to be set in the Thermal Reporting Control (TRC) Register (See Section 22.2 for details on the register) There are 2 uses for the PCH's thermal reporting capability: 1. To provide system thermal data to an external controller. The controller can manage the fans and other cooling elements based on this data. In addition, the PCH can be programmed by setting appropriate bits in the Alert Enable (AE) Register (See Section 22.2 for details on this register) to alert the controller when a device has gone outside of its temperature limits. The alert causes the assertion of the PCH TEMP_ALERT# (SATA5GP/GPIO49/TEMP_ALERT#) signal. See Section 5.21.2.6 for more details. 2. To provide an interface between the external controller and host software. This software interface has no direct affect on the PCH's thermal collection. It is strictly a software interface to pass information or data. Datasheet 241 Functional Description The PCH responds to thermal requests only when the system is in S0 or S1. Once the PCH has been programmed, it will start responding to a request while the system is in S0 or S1. To implement this thermal reporting capability, the platform is required to have appropriate Intel(R) ME firmware, BIOS support, and compatible devices that support the SMBus protocol. 5.21.2.1 Supported Addresses The PCH supports 2 addresses: I2C Address for writes and Block Read Address for reads. These addresses need to be distinct. The two addresses may be fixed by the external controller, or programmable within the controller. The addresses used by the PCH are completely programmable. 5.21.2.1.1 I2C Address This address is used for writes to the PCH. * The address is set by soft straps which are values stored in SPI flash and are defined by the OEM. The address can be set to any value the platform requires. * This address supports all the writes listed in Table 5-49. * SMBus reads by the external controller to this address are not allowed and result in indeterminate behavior. 5.21.2.1.2 Block Read Address This address is used for reads from the PCH. * The address is set by soft straps or BIOS. It can be set to any value the platform requires. * This address only supports SMBus Block Read command and not Byte or Word Read. * The Block Read command is supported as defined in the SMBus 2.0 specification, with the command being 40h, and the byte count being provided by the PCH following the block read format in the SMBus specification. * Writes are not allowed to this address, and result in indeterminate behavior. * Packet Error Code (PEC) may be enabled or not, which is set up by BIOS. 242 Datasheet Functional Description 5.21.2.2 I2C Write Commands to the Intel(R) ME Table 5-49 lists the write commands supported by the Intel(R) ME. All bits in the write commands must be written to the PCH or the operation will be aborted. For example, for 6-bytes write commands, all 48 bits must be written or the operation will be aborted. The command format follows the Block Write format of the SMBus specification. Table 5-49. I2C Write Commands to the ME Slave Addr Data Byte0 (Commd) Data Byte 1 (Byte Count) Data Byte 2 Data Byte 3 Data Byte 4 Data Byte 5 Data Byte 6 Data Byte 7 Write STS Register (See Note below) I2 C 41h 6h STS [47:40] STS [39:32] STS [31:24] STS [23:16] STS [15:8] STS [7:0] Write Processor Core Temp Limits I2C 42h 4h Lower Limit [15:8] Lower Limit [7:0] Upper Limit [15:8] Upper Limit [7:0] Write Memory Controller/ Graphics Temp Limits I2C 43h 2h Lower Limit [7:0] Upper Limit [7:0] Write PCH Temp Limits I2C 44h 2h Lower Limit [7:0] Upper Limit [7:0] Write DIMM Temp Limits I2C 45h 2h Lower Limit [7:0] Upper Limit [7:0] Write Processor Core Power Clamp I2C 50h 2h Power Clamp [15:8] Power Clamp [7:0] Transaction NOTE: The Status Register (STS register) is only writable by an external controller and readable by host SW. Whenever the controller writes to this register, an interrupt, if enabled by BIOS/OS, is sent to the host. The controller must always write a full 48 bits to update this register. Writes of anything other than 6 bytes result in indeterminate behavior. For bit definition of this register, see Section 22.2.26 and Section 22.2.29. 5.21.2.3 Block Read Command The external controller may read thermal information from the PCH using the SMBus Block Read Command. Byte-read and Word-read SMBus commands are not supported. Note that the reads use a different address than the writes. The command format follows the Block Read format of the SMBus spec. The PCH and external controller are set up by BIOS with the length of the read that is supported by the platform. The device must always do reads of the lengths set up by BIOS. The PCH supports any one of the following lengths: 1, 2, 4, 5, 9, 10, 14 or 20 bytes. The data always comes in the order described in Table 5-50, where 0 is the first byte received in time on the SMBus. Datasheet 243 Functional Description Table 5-50. Block Read Command - Byte Definition (Sheet 1 of 2) Byte Definition Maximum temperature, in absolute degrees Celsius (C), of the processor core and graphics. Note that the PCH is not included in this field. It is a single byte for the highest temperature between the 2 components. This is not relative to some max or limit, but is the maximum in absolute degrees. Byte 0 If both the processor core and memory controller/graphics have errors on the temperature collection, this field will be FFh. If either the processor core or memory controller/graphics reports a good temperature, that good temperature is reported in this field. Read value represents bits [7:0] of PTV (Processor Temperature Value) Register described in Section 22.2. NOTE: Requires TRC (Thermal Reporting Control) Register bit [12] to be enabled. See Section 22.2. The PCH temp in degrees C. FFh indicates error condition. Byte 1 Read value represents bits [7:0] of ITV (Internal Temperature Values) Register described in Section 22.2. NOTE: Requires TRC (Thermal Reporting Control) Register bit [5] to be enabled. See Section 22.2. The processor core temp in degrees C. See Table 5-55 for the bit definitions. Byte 3:2 Byte 3 has bits [15:8] and Byte 2 has bits[7:0]. See Table 5-54 for Read data format and definitions. SMBUS Byte Read value [15:0] represents bits [13:0, 14,15] of CTV1 (Core Temperature Value1) Register described in Section 22.2. NOTE: Requires TRC (Thermal Reporting Control) Register bit [7] to be enabled. See Section 22.2. The memory controller/graphics temp in degrees C. FFh indicates error condition Byte 4 Read value represents bits[15:8] of ITV (Internal Temperature Values) Register described in Section 22.2. NOTE: Requires TRC (Thermal Reporting Control) Register bit [4] to be enabled. See Section 22.2. Thermal Sensor (TS) on DIMM 0 If DIMM not populated, or if there is no TS on DIMM, value will be 0h Byte 5 Read value represents bits[7:0] of DTV (DIMM Temperature Values) Register described in Section 22.2. NOTE: Requires TRC (Thermal Reporting Control) Register bit [0] to be enabled. See Section 22.2. Thermal Sensor (TS) on DIMM 1 If DIMM not populated, or if there is no TS on DIMM, value will be 0h Byte 6 Read value represents bits[15:8] of DTV (DIMM Temperature Values) Register described in Section 22.2. NOTE: Requires TRC (Thermal Reporting Control) Register bit [1] to be enabled. See Section 22.2. Thermal Sensor (TS) on DIMM 2 If DIMM not populated, or if there is no TS on DIMM, value will be 0h. Byte 7 244 Read value represents bits[23:16] of DTV (DIMM Temperature Values) Register described in Section 22.2. NOTE: Requires TRC (Thermal Reporting Control) Register bit [2] to be enabled. See Section 22.2. Datasheet Functional Description Table 5-50. Block Read Command - Byte Definition (Sheet 2 of 2) Byte Definition Thermal Sensor (TS) on DIMM 3 If DIMM not populated, or if there is no TS on DIMM, value will be 0h. Byte 8 Read value represents bits[31:24] of DTV (DIMM Temperature Values) Register described in Section 22.2. NOTE: Requires TRC (Thermal Reporting Control) Register bit [3] to be enabled. Sequence number. Can be used to check if the PCH's FW or HW is hung. See Section 5.21.2.9 for usage. Byte 9 This byte is updated every time the collected data is updated Read value represents bits[23:16] of ITV (Internal Temperature Values) Register described in Section 22.2. Byte 10 Bits [7:0] of the latest read of the processor core's energy register NOTE: Requires TRC (Thermal Reporting Control TBARB+1Ah) Register bit [6] to be enabled. Byte 11 Bits [15:8] of the latest read of the processor core's energy register NOTE: Requires TRC (Thermal Reporting Control) Register bit [6] to be enabled. Byte 12 Bits [23:16] of the latest read of the processor core's energy register NOTE: Requires TRC (Thermal Reporting Control) Register bit [6] to be enabled. Byte 13 Bits [31:24] of the latest read of the processor core's energy register NOTE: Requires TRC (Thermal Reporting Control) Register bit [6] to be enabled. Byte 19:14 Host Status - This reflects what the host is presently executing. Byte 14 has bits [7:0], and byte 19 has bits [47:40] of HTS Register. For bit definition, see Section 22.2.22. A controller that only wants the single highest temperature from the processor core and memory controller/graphics could read one byte. A 2-byte read would provide both the PCH and processor temperature. A device that wants each components temperature would do a 5-byte read and ignore the first byte. A device that also wants DIMM information would read 9 bytes. If an external controller wanted to read the Host status, it must read 20 bytes and ignore the first 14. A device can also read the energy data provided by the processor core by reading 14 bytes. 5.21.2.4 Read Data Format For each of the data fields an ERROR Code is listed below. This code indicates that the PCH failed in its access to the device. This would be for the case where the read returned no data, or some illegal value. In general that would mean the device is broken. The EC can treat the device that failed the read as broken or with some failsafe mechanism. Datasheet 245 Functional Description 5.21.2.4.1 Processor Core Temperature The processor core temperature reading on SMLink1 is 16 bits as described in Table 5-51. The granularity is 1/64th degree. Table 5-51. Processor Core Read Data Definition Bit Description Integer component (0 to 255) of the processor core temperature. 15:8 7:2 1 Note the processor core temperature can never be below 0 degrees, so this field is treated as 8 bits (0-255) absolute and not 2's complement (-128 to 127). Fraction Value (in 1/64th). Reserved Illegal value or error in reading the processor core. 0 0 = Reads successful 1 = failure on getting the data from the processor core. The Top byte of the SMLink1 reported processor temperature (byte 3 in Table 5-53) represents the integer component of the data, while top 6 bits of byte 2 represents the fraction portion of the reported temperature. Bit[1] is unused and Bit[0] is used as an error flag. This interpretation of the SMLink1 reported temperature differs from the temperature stored in Core Temperature Value 1 (CTV1) register. See the CTV1 register in Section 22.2.17 for the interpretation of the fields. If the processor core polling has been disabled, then the value returned is 0000h. If there is an error when the PCH reads the data from the processor core, then bit 0 is set to 1. The data provided on the SMBus read and the Write Processor Core Temp Limits command use the format above for their data. 5.21.2.4.2 PCH, Memory Controller/Graphics, and DIMM Temperature The temperature readings for Bytes 0-1 and 4-8, which are the PCH, DIMM, and memory controller/graphics temperatures, are 8-bit unsigned values from 0-255. The minimum granularity supported by the internal thermal sensor is 1 C. Thus, there are no fractional values for the PCH, memory controller/graphics, or DIMM temperatures. Note the sensors used within the components do not support values below 0 degrees, so this field is treated as 8 bits (0-255) absolute and not 2's complement (-128 to 127). Devices that are not present or that are disabled will be set to 0h. Devices that have a failed reading (that is, the read from the device did not return any legal value) will be set to FFh. A failed reading means that the attempt to read that device returned a failure. The failure could have been from a bus failure or that the device itself had an internal failure. For instance, a system may only have one DIMM and it would report only that one value, and the values for the other DIMMs would all be 00h. 5.21.2.5 Thermal Data Update Rate The temperature values are updated every 200 ms in the PCH, so reading more often than that simply returns the same data multiple times. Also, the data may be up to 200 ms old if the external controller reads the data right before the next update window. 246 Datasheet Functional Description 5.21.2.6 Temperature Comparator and Alert The PCH has the ability to alert the external controller when temperatures are out of range. This is done using the PCH TEMP_ALERT# signal. The alert is a simple comparator. If any device's temperature is outside the limit range for that device, then the signal is asserted (electrical low). Note that this alert does not use the SML1ALERT#. The PCH supports 4 ranges: 1. Processor core range - upper and lower limit (8 bits each, 6 bits for fraction, in degrees C). 2. Memory Controller/Graphics range - upper and lower limit (8 bits each, in degrees C) for memory controller/graphics temperature. 3. PCH range - upper and lower limit (8 bits each, in degrees C) for the PCH temperature. 4. DIMM range - upper and lower limit (8 bits each, in degrees C), applies to all DIMMs (up to 4 supported) that are enabled. Disabled (unpopulated) DIMMs do not participate in the thermal compares. The comparator checks if the device is within the specified range, including the limits. For example, a device that is at 100 degrees when the upper limit is 100 will not trigger the alert. Likewise, a device that is at 70 degrees when the lower limit is 70 will not trigger the alert. The compares are done only on devices that have been enabled by BIOS for checking. Since BIOS knows how many DIMMs and processors are in the system, it enables the checking only for those devices that are physically present. The compares are done in firmware, so all the compares are executed in one software loop and at the end, if there is any out of bound temperature, the PCH's TEMP_ALERT# signal is asserted. When the external controller sees the TEMP_ALERT# signal low, it knows some device is out of range. It can read the temperatures and then change the limits for the devices. Note that it may take up to 250 ms before the actual writes cause the signal to change state. For instance if the processor core is at 105 degrees and the limit is 100, the alert is triggered. If the controller changes the limits to 110, the TEMP_ALERT# signal may remain low until the next thermal sampling window (every 200 ms) occurs and only then go high, assuming the processor core was still within its limits. At boot, the controller can monitor the TEMP_ALERT# signal state. When BIOS has finished all the initialization and enabled the temperature comparators, the TEMP_ALERT# signal will be asserted since the default state of the limit registers is 0h; hence, when the PCH first reads temperatures, they will be out of range. This is the positive indication that the external controller may now read thermal information and get valid data. If the TEMP_ALERT# signal is enabled and not asserted within 30 seconds after PLTRST#, the external controller should assume there is a fatal error and handle accordingly. In general the TEMP_ALERT# signal will assert within a 1-4 seconds, depending on the actual BIOS implementation and flow. Note: Datasheet The TEMP_ALERT# assertion is only valid when PLTRST# is de-asserted. The controller should mask the state of this signal when PLTRST# is asserted. Since the controller may be powered even when the PCH and the rest of the platform are not, the signal may glitch as power is being asserted; thus, the controller should wait until PLTRST# has de-asserted before monitoring the signal. 247 Functional Description 5.21.2.6.1 Special Conditions The external controller should have a graceful means of handling the following: 1. TEMP_ALERT# asserts, and the controller reads PCH, but all temperature values are within limits. In this case, the controller should assume that by the time the controller could read the data, it had changed and moved back within the limits. 2. External controller writes new values to temperature limits, but TEMP_ALERT# is still asserted after several hundred msecs. When read, the values are back within limits. In this case, the controller should treat this as case where the temperature changed and caused TEMP_ALERT# assertion, and then changed again to be back within limits. 3. There is the case where the external controller writes an update to the limit register, while the PCH is collecting the thermal information and updating the thermal registers. The limit change will only take affect when the write completes and the Intel(R) ME can process this change. If the Intel(R) ME is already in the process of collecting data and doing the compares, then it will continue to use the old limits during this round of compares, and then use the new limits in the next compare window. 4. Each SMBus write to change the limits is an atomic operation, but is distinct in itself. Therefore the external controller could write PCH limit, and then write memory controller/graphics limit. In the middle of those 2 writes, the thermal collecting procedure could be called by the Intel(R) ME, so that the comparisons for the limits are done with the new PCH limits but the old memory controller/graphics limits. Note: The limit writes are done when the SMBus write is complete; therefore, the limits are updated atomically with respect to the thermal updates and compares. There is never a case where the compares and the thermal update are interrupted in the middle by the write of new limits. The thermal updates and compares are done as one noninterruptible routine, and then the limit writes would change the limit value outside of that routine. 5.21.2.7 BIOS Set Up For the PCH to properly report temperature and enable alerts, the BIOS must configure the PCH at boot or from suspend/resume state by writing the following information to the PCH MMIO space. This information is NOT configurable using the external controller. * Enables for each of the 4 possible thermal alerts (Processor core, Memory Controller/Graphics, PCH and DIMM). Note that each DIMM is enabled individually. * Enables for reading DIMM, Processor Core, Memory Controller/Graphics, and PCH temperatures. Note that each can be enabled individually. * SMBus address to use for each DIMM. Setting up the temperature calculation equations. 248 Datasheet Functional Description 5.21.2.8 SMBus Rules The PCH may NACK an incoming SMBus transaction. In certain cases the PCH will NACK the address, and in other cases it will NACK the command depending on internal conditions (such as, errors, busy conditions). Given that most of the cases are due to internal conditions, the external controller must alias a NACK of the command and a NACK of the address to the same behavior. The controller must not try to make any determination of the reason for the NACK, based on the type of NACK (command vs. address). The PCH will NACK when it is enabled but busy. The external controller is required to retry up to 3 times when they are NACK'ed to determine if the FW is busy with a data update. When the data values are being updated by the Intel(R) ME, it will force this NACK to occur so that the data is atomically updated to the external controller. In reality if there is a NACK because of the PCH being busy, in almost all cases the next read will succeed since the update internally takes very little time. The only long delay where there can be a NACK is if the internal Intel(R) ME engine is reset. This is due to some extreme error condition and is therefore rare. In this case the NACK may occur for up to 30 seconds. After that, the external controller must assume that the PCH will never return good data. Even in the best of cases, when this internal reset occurs, it will always be a second or 2 to re-enable responding. 5.21.2.8.1 During Block Read On the Block Read, the PCH will respect the NACK and Stop indications from the external controller, but will consider this an error case. It will recover from this case and correctly handle the next SMBus request. The PCH will honor STOP during the block read command and cease providing data. On the next Block Read, the data will start with byte 0 again. However, this is not a recommended usage except for 'emergency cases'. In general the external controller should read the entire length of data that was originally programmed. 5.21.2.8.2 Power On On the Block Read, the PCH will respect the NACK and Stop indications from the external controller, but will consider this an error case. It will recover from this case and correctly handle the next SMBus request. The PCH will honor STOP during the block read command and cease providing data. On the next Block Read, the data will start with byte 0 again. However, this is not a recommended usage except for 'emergency cases'. In general the external controller should read the entire length of data that was originally programmed. Datasheet 249 Functional Description 5.21.2.9 Case for Considerations Below are some corner cases and some possible actions that the external controller could take. Note that a 1-byte sequence number is available to the data read by the external controller. Each time the PCH updates the thermal information it will increment the sequence number. The external controller can use this value as an indication that the thermal FW is actually operating. Note that the sequence number will roll over to 00h when it reaches FFh. 1. Power on: The PCH will not respond to any SMBus activity (on SMLink1 interface) until it has loaded the thermal Firmware (FW), which in general would take 1-4 seconds. During this period, the PCH will NACK any SMBus transaction from the external controller. The load should take 1-4 seconds, but the external controller should design for 30 seconds based on long delays for S4 resume which takes longer than normal power up. This would be an extreme case, but for larger memory footprints and non-optimized recovery times, 30 seconds is a safe number to use for the timeout. Recover/Failsafe: if the PCH has not responded within 30 seconds, the external controller can assume that the system has had a major error and the external controller should ramp the fans to some reasonably high value. The only recover from this is an internal reset on the PCH, which is not visible to the external controller. Therefore the external controller might choose to poll every 10-60 seconds (some fairly long period) hereafter to see if the PCH's thermal reporting has come alive. 2. The PCH Thermal FW hangs and requires an internal reset which is not visible to the external controller. The PCH will NACK any SMBus transaction from the external controller. The PCH may not be able to respond for up to 30 seconds while the FW is being reset and reconfigured. The external controller could choose to poll every 1-10 seconds to see if the thermal FW has been successfully reset and is now providing data. General recovery for this case is about 1 second, but 30 seconds should be used by the external controller at the timeout. Recovery/Failsafe: same as in case #1. 3. Fatal PCH error, causes a global reset of all components. When there is a fatal PCH error, a global reset may occur, and then case #1 applies. The external controller can observe, if desired, PLTRST# assertion as an indication of this event. 4. The PCH thermal FW fails or is hung, but no reset occurs. The sequence number will not be updated, so the external controller knows to go to failsafe after some number of reads (8 or so) return the same sequence number. The external controller could choose to poll every 1-10 seconds to see if the thermal FW has been successfully reset and working again. In the absence of other errors, the updates for the sequence number should never be longer than 400 ms, so the number of reads needed to indicate that there is a hang should be at around 2 seconds. But when there is an error, the sequence number may not get updated for seconds. In the case that the 250 Datasheet Functional Description external controller sees a NACK from the PCH, then it should restart its sequence counter, or otherwise be aware that the NACK condition needs to be factored into the sequence number usage. The use of sequence numbers is not required, but is provided as a means to ensure correct PCH FW operation. 5. When the PCH updates the Block Read data structure, the external controller gets a NACK during this period. To ensure atomicity of the SMBus data read with respect to the data itself, when the data buffer is being updated, the PCH will NACK the Block Read transaction. The update is only a few micro-seconds, so very short in terms of SMBus polling time; therefore, the next read should be successful. The external controller should attempt 3 reads to handle this condition before moving on. If the Block read has started (that is, the address is ACK'ed) then the entire read will complete successfully, and the PCH will update the data only after the SMBus read has completed. 6. System is going from S0 to S3/4/5. Note that the thermal monitoring FW is fully operational if the system is in S0/S1, so the following only applies to S3/4/5. When the PCH detects the OS request to go to S3/4/5, it will take the SMLink1 controller offline as part of the system preparation. The external controller will see a period where its transactions are getting NACK'ed, and then see SLP_S3# assert. This period is relatively short (a couple of seconds depending on how long all the devices take to place themselves into the D3 state), and would be far less than the 30 second limit mentioned above. 7. TEMP_ALERT#--Since there can be an internal reset, the TEMP_ALERT# may get asserted after the reset. The external controller must accept this assertion and handle it. 5.21.2.9.1 Example Algorithm for Handling Transaction One algorithm for the transaction handling could be summarized as follows. This is just an example to illustrate the above rules. There could be other algorithms that can achieve the same results. 1. Perform SMBus transaction. 2. If ACK, then continue. 3. If NACK: a. Try again for 2 more times, in case the PCH is busy updating data. b. If 3 successive transactions receive NACK, then: - Ramp fans, assuming some general long reset or failure - Try every 1-10 seconds to see if SMBus transactions are now working - If they start then return to step 1 - If they continue to fail, then stay in this step and poll, but keep the fans ramped up or implement some other failure recovery mechanism Datasheet 251 Functional Description 5.22 Intel(R) High Definition Audio Overview (D27:F0) The PCH High Definition Audio (HDA) controller communicates with the external codec(s) over the Intel(R) High Definition Audio serial link. The controller consists of a set of DMA engines that are used to move samples of digitally encoded data between system memory and an external codec(s). The PCH implements four output DMA engines and 4 input DMA engines. The output DMA engines move digital data from system memory to a D-A converter in a codec. The PCH implements a single Serial Data Output signal (HDA_SDOUT) that is connected to all external codecs. The input DMA engines move digital data from the A-D converter in the codec to system memory. The PCH implements four Serial Digital Input signals (HDA_SDI[3:0]) supporting up to four codecs. Audio software renders outbound and processes inbound data to/from buffers in system memory. The location of individual buffers is described by a Buffer Descriptor List (BDL) that is fetched and processed by the controller. The data in the buffers is arranged in a predefined format. The output DMA engines fetch the digital data from memory and reformat it based on the programmed sample rate, bit/sample and number of channels. The data from the output DMA engines is then combined and serially sent to the external codecs over the Intel(R) High Definition Audio link. The input DMA engines receive data from the codecs over the Intel(R) High Definition Audio link and format the data based on the programmable attributes for that stream. The data is then written to memory in the predefined format for software to process. Each DMA engine moves one stream of data. A single codec can accept or generate multiple streams of data, one for each A-D or D-A converter in the codec. Multiple codecs can accept the same output stream processed by a single DMA engine. Codec commands and responses are also transported to and from the codecs using DMA engines. The PCH HD audio controller supports the Function Level Reset (FLR). 5.22.1 Intel(R) High Definition Audio Docking (Mobile Only) 5.22.1.1 Dock Sequence Note that this sequence is followed when the system is running and a docking event occurs. 1. Since the PCH supports docking, the Docking Supported (DCKSTS. DS) bit defaults to a 1. POST BIOS and ACPI BIOS software uses this bit to determine if the HD Audio controller supports docking. BIOS may write a 0 to this RWO bit during POST to effectively turn off the docking feature. 2. After reset in the undocked quiescent state, the Dock Attach (DCKCTL.DA) bit and the Dock Mate (DCKSTS.DM) bit are both de-asserted. The HDA_DOCK_EN# signal is de-asserted and HDA_DOCK_RST# is asserted. Bit Clock, SYNC and SDO signals may or may no be running at the point in time that the docking event occurs. 3. The physical docking event is signaled to ACPI BIOS software using ACPI control methods. This is normally done through a GPIO signal on the PCH and is outside the scope of this section of the spec. 4. ACPI BIOS software first checks that the docking is supported using DCKSTS.DS=1 and that the DCKSTS.DM=0 and then initiates the docking sequence by writing a 1 to the DCKCTL.DA bit. 5. The HD Audio controller then asserts the HDA_DOCK_EN# signal so that the Bit Clock signal begins toggling to the dock codec. HDA_DOCK_EN# shall be asserted synchronously to Bit Clock and timed such that Bit Clock is low, SYNC is low, and SDO is low. Pull-down resistors on these signals in the docking station discharge 252 Datasheet Functional Description the signals low so that when the state of the signal on both sides of the switch is the same when the switch is turned on. This reduces the potential for charge coupling glitches on these signals. Note that in the PCH the first 8 bits of the Command field are "reserved" and always driven to 0's. This creates a predictable point in time to always assert HDA_DOCK_EN#. Note that the HD Audio link reset exit specification that requires that SYNC and SDO be driven low during Bit Clock startup is not ensured. Note also that the SDO and Bit Clock signals may not be low while HDA_DOCK_RST# is asserted which also violates the spec. 6. After the controller asserts HDA_DOCK_EN# it waits for a minimum of 2400 Bit Clocks (100us) and then de-asserts HDA_DOCK_RST#. This is done in such a way to meet the HD Audio link reset exit specification. HDA_DOCK_RST# de-assertion should be synchronous to Bit Clock and timed such that there are least 4 full Bit ClockS from the de-assertion of HDA_DOCK_RST# to the first frame SYNC assertion. 7. The Connect/Turnaround/Address Frame hardware initialization sequence will now occur on the dock codecs' SDI signals. A dock codec is detected when SDI is high on the last Bit Clock cycle of the Frame Sync of a Connect Frame. The appropriate bit(s) in the State Change Status (STATESTS) register will be set. The Turnaround and Address Frame initialization sequence then occurs on the dock codecs' SDI(s). 8. After this hardware initialization sequence is complete (approximately 32 frames), the controller hardware sets the DCKSTS.DM bit to 1 indicating that the dock is now mated. ACPI BIOS polls the DCKSTS.DM bit and when it detects it is set to 1, conveys this to the OS through a plug-N-play IRP. This eventually invokes the HD Audio Bus Driver, which then begins it's codec discovery, enumeration, and configuration process. 9. Alternatively to step #8, the HD Audio Bus Driver may choose to enable an interrupt by setting the WAKEEN bits for SDINs that didn't originally have codecs attached to them. When a corresponding STATESTS bit gets set an interrupt will be generated. In this case the HD Audio Bus Driver is called directly by this interrupt instead of being notified by the plug-N-play IRP. 10. HD Audio Bus Driver software "discovers" the dock codecs by comparing the bits now set in the STATESTS register with the bits that were set prior to the docking event. 5.22.1.2 Exiting D3/CRST# when Docked 1. In D3/CRST#, CRST# is asserted by the HD Audio Bus Driver. CRST# asserted resets the dock state machines, but does not reset the DCKCTL.DA bit. Because the dock state machines are reset, the dock is electrically isolated (HDA_DOCK_EN# de-asserted) and DOCK_RST# is asserted. 2. The Bus Driver clears the STATESTS bits, then de-asserts CRST#, waits approximately 7ms, then checks the STATESTS bits to see which codecs are present. 3. When CRST# is de-asserted, the dock state machine detects that DCKCTL.DA is still set and the controller hardware sequences through steps to electrically connect the dock by asserting HDA_DOCK_EN# and then eventually de-asserts DOCK_RST#. This completes within the 7ms mentioned in step 2). 4. The Bus Driver enumerates the codecs present as indicated using the STATESTS bits. 5. Note that this process did not require BIOS or ACPI BIOS to set the DCKCTL.DA bit. Datasheet 253 Functional Description 5.22.1.3 Cold Boot/Resume from S3 When Docked 1. When booting and resuming from S3, PLTRST# switches from asserted to deasserted. This clears the DCKCTL.DA bit and the dock state machines. Because the dock state machines are reset, the dock is electrically isolated (HDA_DOCK_EN# de-asserted) and DOCK_RST# is asserted. 2. POST BIOS detects that the dock is attached and sets the DCKCTL.DA bit to 1. Note that at this point CRST# is still asserted so the dock state machine will remain in it's reset state. 3. The Bus Driver clears the STATESTS bits, then de-asserts CRST#, waits approximately 7ms, then checks the STATESTS bits to see which codecs are present. 4. When CRST# is de-asserted, the dock state machine detects that DCKCTL.DA is still set and the controller hardware sequences through steps to electrically connect the dock by asserting HDA_DOCK_EN# and then eventually de-asserts DOCK_RST#. This completes within the 7ms mentioned in step 3). 5. The Bus Driver enumerates the codecs present as indicated using the STATESTS bits. 5.22.1.4 Undock Sequence There are two possible undocking scenarios. The first is the one that is initiated by the user that invokes software and gracefully shuts down the dock codecs before they are undocked. The second is referred to as the "surprise undock" where the user undocks while the dock codec is running. Both of these situations appear the same to the controller as it is not cognizant of the "surprise removal". But both sequences will be discussed here. 5.22.1.5 Normal Undock 1. In the docked quiescent state, the Dock Attach (DCKCTL.DA) bit and the Dock Mate (DCKSTS.DM) bit are both asserted. The HDA_DOCK_EN# signal is asserted and HDA_DOCK_RST# is de-asserted. 2. The user initiates an undock event through the GUI interface or by pushing a button. This mechanism is outside the scope of this section of the document. Either way ACPI BIOS software will be invoked to manage the undock process. 3. ACPI BIOS will call the HD Audio Bus Driver software to halt the stream to the dock codec(s) prior to electrical undocking. If the HD Audio Bus Driver is not capable of halting the stream to the docked codec, ACPI BIOS will initiate the hardware undocking sequence as described in the next step while the dock stream is still running. From this standpoint, the result is similar to the "surprise undock" scenario where an audio glitch may occur to the docked codec(s) during the undock process. 4. The ACPI BIOS initiates the hardware undocking sequence by writing a 0 to the DCKCTL.DA bit. 5. The HD Audio controller asserts HDA_DOCK_RST#. HDA_DOCK_RST# assertion shall be synchronous to Bit Clock. There are no other timing requirements for HDA_DOCK_RST# assertion. Note that the HD Audio link reset specification requirement that the last Frame sync be skipped will not be met. 6. A minimum of 4 Bit Clocks after HDA_DOCK_RST# the controller will de-assert HDA_DOCK_EN# to isolate the dock codec signals from the PCH HD Audio link signals. HDA_DOCK_EN# is de-asserted synchronously to Bit Clock and timed such that Bit Clock, SYNC, and SDO are low. 7. After this hardware undocking sequence is complete the controller hardware clears the DCKSTS.DM bit to 0 indicating that the dock is now un-mated. ACPI BIOS software polls DCKSTS.DM and when it sees DM set, conveys to the end user that physical undocking can proceed. The controller is now ready for a subsequent docking event. 254 Datasheet Functional Description 5.22.1.6 Surprise Undock 1. In the surprise undock case the user undocks before software has had the opportunity to gracefully halt the stream to the dock codec and initiate the hardware undock sequence. 2. A signal on the docking connector is connected to the switch that isolates the dock codec signals from the PCH HD Audio link signals (DOCK_DET# in the conceptual diagram). When the undock event begins to occur the switch will be put into isolate mode. 3. The undock event is communicated to the ACPI BIOS using ACPI control methods that are outside the scope of this section of the document. 4. ACPI BIOS software writes a 0 to the DCKCTL.DA bit. ACPI BIOS then calls the HD Audio Bus Driver using plug-N-play IRP. The Bus Driver then posthumously cleans up the dock codec stream. 5. The HD Audio controller hardware is oblivious to the fact that a surprise undock occurred. The flow from this point on is identical to the normal undocking sequence described in section 0 starting at step 3). It finishes with the hardware clearing the DCKSTS.DM bit set to 0 indicating that the dock is now un-mated. The controller is now ready for a subsequent docking event. 5.22.1.7 Interaction Between Dock/Undock and Power Management States When exiting from S3, PLTRST# will be asserted. The POST BIOS is responsible for initiating the docking sequence if the dock is already attached when PLTRST# is deasserted. POST BIOS writes a 1 to the DCKCTL.DA bit prior to the HD Audio driver deasserting CRTS# and detecting and enumerating the codecs attached to the HDA_DOCK_RST# signal. The HD Audio controller does not directly monitor a hardware signal indicating that a dock is attached. Therefore a method outside the scope of this document must be used to cause the POST BIOS to initiate the docking sequence. When exiting from D3, CRST# will be asserted. When CRST# bit is "0" (asserted), the DCKCTL.DA bit is not cleared. The dock state machine will be reset such that HDA_DOCK_EN# will be de-asserted, HDA_DOCK_RST# will be asserted and the DCKSTS.DM bit will be cleared to reflect this state. When the CRST# bit is de-asserted, the dock state machine will detect that DCKCTL.DA is set to "1" and will begin sequencing through the dock process. Note that this does not require any software intervention. 5.22.1.8 Relationship between HDA_DOCK_RST# and HDA_RST# HDA_RST# will be asserted when a PLTRST# occurs or when the CRST# bit is 0. As long as HDA_RST# is asserted, the DOCK_RST# signal will also be asserted. When PLTRST# is asserted, the DCKCTL.DA and DCKSTS.DM bits will be get cleared to their default state (0's), and the dock state machine will be reset such that HDA_DOCK_EN# will be de-asserted, and HDA_DOCK_RST# will be asserted. After any PLTRST#, POST BIOS software is responsible for detecting that a dock is attached and then writing a "1" to the DCKCTL.DA bit prior to the HD Audio Bus Driver de-asserting CRST#. When CRST# bit is "0" (asserted), the DCKCTL.DA bit is not cleared. The dock state machine will be reset such that HDA_DOCK_EN# will be de-asserted, HDA_DOCK_RST# will be asserted and the DCKSTS.DM bit will be cleared to reflect this state. When the CRST# bit is de-asserted, the dock state machine will detect that DCKCTL.DA is set to "1" and will begin sequencing through the dock process. Note that this does not require any software intervention Datasheet 255 Functional Description 5.23 Intel(R) Active Management Technology 6.0 (Intel(R) AMT) Intel(R) Active Management Technology is a set of advanced manageability features developed to meet the evolving demands placed on IT to manage a network infrastructure. Intel(R) AMT reduces the Total Cost of Ownership (TCO) for IT management through features such as asset tracking, remote manageability, and robust policy-based security, resulting in fewer desk-side visits and reduced incident support durations. Intel(R) AMT extends the manageability capability for IT through Out Of Band (OOB), allowing asset information, remote diagnostics, recovery, and contain capabilities to be available on client systems even when they are in a low power, or "off" state, or in situations when the operating system is hung. Figure 5-11. PCH Intel(R) Management Engine High-Level Block Diagram 256 Datasheet Functional Description 5.23.1 Intel(R) AMT6.x and ASF 2.0 Features * E-Asset Tag and OOB hardware and software Inventory Logs * OOB Alerts that may trigger one or more aspects of Intel(R) AM's management and security features over IPv4, IPv6, and KVM. Available only over wired LAN. * IDE Redirect and Serial over LAN for Remote Control * Remote diagnostics, remote BIOS recovery and update * OS Lock-Up Alert and operating system Repair * Wake capability from lower system power state, including Wake on LAN* (WOL), Wake on Manageability Packet (WOME), Wake on VOIP (WOV), and Wake on Event (WOX) * DASH 1.0/1.1 profile compatibility and Microsoft* NAP* posturing * Client Initiated Remote Access (CIRA)--Allows a client on the internet to, at its request, make itself discoverable on an AMT infrastructure behind a firewall for remote manageability. Available both over wired and wireless LAN. * Intel(R) Anti-Theft Technology OOB key recovery 5.23.2 Intel(R) AMT Requirements Intel(R) AMT is a platform-level solution that uses multiple system components including: * Intel(R) AMT-Ready PCH SKU * Intel(R) Gigabit Ethernet PHY (Intel(R) 82577/82578 Gigabit Platform LAN Connect device) with Intel(R) AMT for remote access * SPI flash memory that meets requirements set in Section 5.24.4 (64 Mb minimum for Intel(R) AMT 6.0) to store asset information, management software code, and logs * BIOS to provide asset detection and POST diagnostics (BIOS and Intel(R) AMT can optionally share same flash memory device) * An ISV software package - such as LANDesk*, Altiris*, or Microsoft* SMS* - to take advantage of Intel(R) AMT's platform manageability capabilities Datasheet 257 Functional Description 5.24 Serial Peripheral Interface (SPI) The Serial Peripheral Interface (SPI) is a 4-pin interface that provides a lower-cost alternative for system flash versus the Firmware Hub on the LPC bus. The 4-pin SPI interface consists of clock (CLK), master data out (Master Out Slave In (MOSI)), master data in (Master In Slave Out (MISO)) and an active low chip select (SPI_CS[1:0]#). The PCH supports up to two SPI flash devices using two separate Chip Select pins. Each SPI flash device can be up to 16 MBytes. The PCH SPI interface supports 20 MHz, 33MHz, and 50 MHz SPI devices. A SPI Flash device on with Chip Select 0 with a valid descriptor MUST be attached directly to the PCH. Communication on the SPI bus is done with a Master - Slave protocol. The Slave is connected to the PCH and is implemented as a tri-state bus. Note: If Boot BIOS Strap ='00' LPC is selected as the location for BIOS. BIOS may still be placed on LPC, but all platforms with the PCH requires SPI flash connected directly to the PCH's SPI bus with a valid descriptor connected to Chip select 0 to boot. Note: When SPI is selected by the Boot BIOS Destination Strap and a SPI device is detected by the PCH, LPC based BIOS flash is disabled. 5.24.1 SPI Supported Feature Overview SPI Flash on the PCH has two operational modes, descriptor and non-descriptor. 5.24.1.1 Non-Descriptor Mode Non-Descriptor Mode is not supported as a valid flash descriptor is required for all PCH Platforms. 5.24.1.2 Descriptor Mode Descriptor Mode is required for all SKUs of the PCH. It enables many new features of the chipset: * Integrated Gigabit Ethernet and Host processor for Gigabit Ethernet Software * Intel(R) Active Management Technology * Intel(R) Quiet System Technology * Intel(R) Management Engine Firmware * PCI Express* root port configuration * Supports up to two SPI components using two separate chip select pins * Hardware enforced security restricting master accesses to different regions * Chipset Soft Strap regions provides the ability to use Flash NVM as an alternative to hardware pull-up/pull-down resistors for the PCH and Processor * Supports the SPI Fast Read instruction and frequencies of up to 33 MHz * Uses standardized Flash Instruction Set 258 Datasheet Functional Description 5.24.1.2.1 SPI Flash Regions In Descriptor Mode the Flash is divided into five separate regions: Region Content 0 Flash Descriptor 1 BIOS 2 Management Engine 3 Gigabit Ethernet 4 Platform Data Only three masters can access the four regions: Host processor running BIOS code, Integrated Gigabit Ethernet and Host processor running Gigabit Ethernet Software, and Management Engine. The only required region is Region 0, the Flash Descriptor. Region 0 must be located in the first sector of device 0 (offset 0). Flash Region Sizes SPI flash space requirements differ by platform and configuration. The Flash Descriptor requires one 4 KB or larger block. GbE requires two 4 KB or larger blocks. The amount of flash space consumed is dependent on the erase granularity of the flash part and the platform requirements for the ME and BIOS regions. The Intel ME region contains firmware to support Intel Active Management Technology and other Intel ME capabilities. Table 5-52. Region Size versus Erase Granularity of Flash Components Datasheet Region Size with 4 KB Blocks Size with 8 KB Blocks Size with 64 KB Blocks Descriptor 4 KB 8 KB 64 KB GbE 8 KB 16 KB 128 KB BIOS Varies by Platform Varies by Platform Varies by Platform ME Varies by Platform Varies by Platform Varies by Platform 259 Functional Description 5.24.1.3 Device Partitioning The PCH SPI Flash controller supports two sets of attributes in SPI flash space. This allows for supporting an asymmetric flash component that has two separate sets of attributes in the upper and lower part of the memory array. An example of this is a flash part that has different erase granularities in two different parts of the memory array. This allows for the usage of two separate flash vendors if using two different flash parts. Figure 5-12. Flash Partition Boundary Upper Flash Partition ... Flash Partition Boundary Lower Flash Partition 5.24.2 ... Flash Descriptor The maximum size of the Flash Descriptor is 4 KB. If the block/sector size of the SPI flash device is greater than 4 KB, the flash descriptor will only use the first 4 KB of the first block. The flash descriptor requires its own block at the bottom of memory (00h). The information stored in the Flash Descriptor can only be written during the manufacturing process as its read/write permissions must be set to Read only when the computer leaves the manufacturing floor. The Flash Descriptor is made up of eleven sections (see Figure 5-13). 260 Datasheet Functional Description Figure 5-13. Flash Descriptor Sections 4KB OEM Section Descriptor Upper MAP Management Engine VSCC Table Reserved PCH Soft Straps Master Region Component Descriptor MAP 0 Signature 1. The Flash signature selects Descriptor Mode as well as verifies if the flash is programmed and functioning. The data at the bottom of the flash (offset 0) must be 0FF0A55Ah to be in Descriptor mode. 2. The Descriptor map has pointers to the other five descriptor sections as well as the size of each. Datasheet 261 Functional Description 3. The component section has information about the SPI flash in the system including: the number of components, density of each, illegal instructions (such as chip erase), and frequencies for read, fast read and write/erase instructions. 4. The Region section points to the three other regions as well as the size of each region. 5. The master region contains the security settings for the flash, granting read/write permissions for each region and identifying each master by a requestor ID. See Section 5.24.2.1 for more information. 6 & 7. The Processor and PCH chipset soft strap sections contain Processor and PCH configurable parameters. 8. The Reserved region between the top of the Processor strap section and the bottom of the OEM Section is reserved for future chipset usages. 9. The Descriptor Upper MAP determines the length and base address of the Management Engine VSCC Table. 10. The Management Engine VSCC Table holds the JEDEC ID and the VSCC information of the entire SPI Flash supported by the NVM image. 11. OEM Section is 256 Bytes reserved at the top of the Flash Descriptor for use by OEM. 5.24.2.1 Descriptor Master Region The master region defines read and write access setting for each region of the SPI device. The master region recognizes three masters: BIOS, Gigabit Ethernet, and Management Engine. Each master is only allowed to do direct reads of its primary regions. Table 5-53. Region Access Control Table Master Read/Write Access 262 Region Processor and BIOS ME GbE Controller Descriptor N/A N/A N/A BIOS CPU and BIOS can always read from and write to BIOS Region Read / Write Read / Write Management Engine Read / Write ME can always read from and write to ME Region Read / Write Gigabit Ethernet Read / Write Read / Write GbE software can always read from and write to GbE region Platform Data Region N/A N/A N/A Datasheet Functional Description 5.24.3 Flash Access There are two types of flash accesses: Direct Access: * Masters are allowed to do direct read only of their primary region -- Gigabit Ethernet region can only be directly accessed by the Gigabit Ethernet controller. Gigabit Ethernet software must use Program Registers to access the Gigabit Ethernet region. * Master's Host or Management Engine virtual read address is converted into the SPI Flash Linear Address (FLA) using the Flash Descriptor Region Base/Limit registers Program Register Access: * Program Register Accesses are not allowed to cross a 4 KB boundary and can not issue a command that might extend across two components * Software programs the FLA corresponding to the region desired -- Software must read the devices Primary Region Base/Limit address to create a FLA. 5.24.3.1 Direct Access Security * Requester ID of the device must match that of the primary Requester ID in the Master Section * Calculated Flash Linear Address must fall between primary region base/limit * Direct Write not allowed * Direct Read Cache contents are reset to 0's on a read from a different master -- Supports the same cache flush mechanism in ICH7 which includes Program Register Writes 5.24.3.2 Register Access Security * Only primary region masters can access the registers Note: Processor running Gigabit Ethernet software can access Gigabit Ethernet registers * Masters are only allowed to read or write those regions they have read/write permission * Using the Flash Region Access Permissions, one master can give another master read/write permissions to their area * Using the five Protected Range registers, each master can add separate read/write protection above that granted in the Flash Descriptor for their own accesses -- Example: BIOS may want to protect different regions of BIOS from being erased -- Ranges can extend across region boundaries Datasheet 263 Functional Description 5.24.4 Serial Flash Device Compatibility Requirements A variety of serial flash devices exist in the market. For a serial flash device to be compatible with the PCH SPI bus, it must meet the minimum requirements detailed in the following sections. Note: All PCH platforms have require Intel(R) Management engine Firmware. 5.24.4.1 PCH SPI Based BIOS Requirements A serial flash device must meet the following minimum requirements when used explicitly for system BIOS storage. * Erase size capability of at least one of the following: 64 Kbytes, 8 Kbytes, 4 Kbytes, or 256 bytes. * Device must support multiple writes to a page without requiring a preceding erase cycle (see Section 5.24.5). * Serial flash device must ignore the upper address bits such that an address of FFFFFFh aliases to the top of the flash memory. * SPI Compatible Mode 0 support (clock phase is 0 and data is latched on the rising edge of the clock). * If the device receives a command that is not supported or incomplete (less than 8 bits), the device must complete the cycle gracefully without any impact on the flash content. * An erase command (page, sector, block, chip, etc.) must set all bits inside the designated area (page, sector, block, chip, etc.) to 1 (Fh). * Status Register bit 0 must be set to 1 when a write, erase or write to status register is in progress and cleared to 0 when a write or erase is NOT in progress. * Devices requiring the Write Enable command mst automatically clear the Write Enable Latch at the end of Data Program instructions. * Byte write must be supported. The flexibility to perform a write between 1 byte to 64 bytes is recommended. * Hardware Sequencing requirements are optional in BIOS only platforms. * SPI flash parts that do not meet Hardware sequencing command set requirements may work in BIOS only platforms using software sequencing. 5.24.4.2 Integrated LAN Firmware SPI Flash Requirements A serial flash device that will be used for system BIOS and Integrated LAN or Integrated LAN only must meet all the SPI Based BIOS Requirements plus: * Hardware sequencing. * 4, 8, or 64 KB erase capability must be supported. 5.24.4.2.1 SPI Flash Unlocking Requirements for Integrated LAN BIOS must ensure there is no SPI flash based read/write/erase protection on the GbE region. GbE firmware and drivers for the integrated LAN need to be able to read, write and erase the GbE region at all times. 264 Datasheet Functional Description 5.24.4.3 Intel(R) Management Engine Firmware SPI Flash Requirements Intel(R) Management Engine Firmware must meet the SPI flash based BIOS Requirements plus: * Hardware Sequencing. * Flash part must be uniform 4 KB erasable block throughout the entire device or have 64 KB blocks with the first block (lowest address) divided into 4 KB or 8 KB blocks. * Write protection scheme must meet SPI flash unlocking requirements for Management Engine. 5.24.4.3.1 SPI Flash Unlocking Requirements for Management Engine Flash devices must be globally unlocked (read, write and erase access on the ME region) from power on by writing 00h to the flash's status register to disable write protection. If the status register must be unprotected, it must use the enable write status register command 50h or write enable 06h. Opcode 01h (write to status register) must then be used to write a single byte of 00h into the status register. This must unlock the entire part. If the SPI flash's status register has non-volatile bits that must be written to, bits [5:2] of the flash's status register must be all 0h to indicate that the flash is unlocked. If bits [5:2] return a non zero values, the Intel(R) ME firmware will send a write of 00h to the status register. This must keep the flash part unlocked. If there is no need to execute a write enable on the status register, then opcodes 06h and 50h must be ignored. After global unlock, BIOS has the ability to lock down small sections of the flash as long as they do not involve the ME or GbE region. 5.24.4.4 Hardware Sequencing Requirements Table 5-54 contains a list of commands and the associated opcodes that a SPI-based serial flash device must support to be compatible with hardware sequencing. Table 5-54. Hardware Sequencing Commands and Opcode Requirements (Sheet 1 of 2) Commands Datasheet Opcode Notes Write to Status Register 01h Writes a byte to SPI flash's status register. Enable Write to Status Register command must be run prior to this command. Program Data 02h Single byte or 64 byte write as determined by flash part capabilities and software. Read Data 03h Write Disable 04h Read Status 05h Write Enable 06h Fast Read 0Bh Enable Write to Status Register 50h or 60h Outputs contents of SPI flash's status register Enables a bit in the status register to allow an update to the status register 265 Functional Description Table 5-54. Hardware Sequencing Commands and Opcode Requirements (Sheet 2 of 2) Commands 5.24.4.4.1 Opcode Erase Program mable Full Chip Erase C7h JEDEC ID 9Fh Notes 256B, 4 Kbyte, 8 Kbyte or 64 Kbyte See Section 5.24.4.4.1. JEDEC ID Since each serial flash device may have unique capabilities and commands, the JEDEC ID is the necessary mechanism for identifying the device so the uniqueness of the device can be comprehended by the controller (master). The JEDEC ID uses the opcode 9Fh and a specified implementation and usage model. This JEDEC Standard Manufacturer and Device ID read method is defined in Standard JESD21-C, PRN03-NV. 5.24.5 Multiple Page Write Usage Model The system BIOS and Intel(R) Management Engine firmware usage models require that the serial flash device support multiple writes to a page (minimum of 512 writes) without requiring a preceding erase command. BIOS commonly uses capabilities such as counters that are used for error logging and system boot progress logging. These counters are typically implemented by using byte-writes to `increment' the bits within a page that have been designated as the counter. The Intel(R) ME firmware usage model requires the capability for multiple data updates within any given page. These data updates occur using byte-writes without executing a preceding erase to the given page. Both the BIOS and Intel(R) ME firmware multiple page write usage models apply to sequential and non-sequential data writes. Note: This usage model requirement is based on any given bit only being written once from a `1' to a `0'without requiring the preceding erase. An erase would be required to change bits back to the 1 state. 5.24.5.1 Soft Flash Protection There are two types of flash protection that are not defined in the flash descriptor supported by PCH: 1. BIOS Range Write Protection 2. SMI#-Based Global Write Protection Both mechanisms are logically OR'd together such that if any of the mechanisms indicate that the access should be blocked, then it is blocked. Table 5-55 provides a summary of the mechanisms. Table 5-55. Flash Protection Mechanism Summary Mechanism Accesses Blocked Range Specific? Reset-Override or SMI#Override? Equivalent Function on FWH BIOS Range Write Protection Writes Yes Reset Override FWH Sector Protection Write Protect Writes No SMI# Override Same as Write Protect in Intel(R) ICHs for FWH A blocked command will appear to software to finish, except that the Blocked Access status bit is set in this case. 266 Datasheet Functional Description 5.24.5.2 BIOS Range Write Protection The PCH provides a method for blocking writes to specific ranges in the SPI flash when the Protected BIOS Ranges are enabled. This is achieved by checking the Opcode type information (which can be locked down by the initial Boot BIOS) and the address of the requested command against the base and limit fields of a Write Protected BIOS range. Note: Once BIOS has locked down the Protected BIOS Range registers, this mechanism remains in place until the next system reset. 5.24.5.3 SMI# Based Global Write Protection The PCH provides a method for blocking writes to the SPI flash when the Write Protected bit is cleared (that is, protected). This is achieved by checking the Opcode type information (which can be locked down by the initial Boot BIOS) of the requested command. The Write Protect and Lock Enable bits interact in the same manner for SPI BIOS as they do for the FWH BIOS. 5.24.6 Flash Device Configurations The PCH-based platform must have a SPI flash connected directly to the PCH with a valid descriptor and Intel(R) Management Engine Firmware. BIOS may be stored in other locations such as Firmware Hub and SPI flash hooked up directly to an embedded controller for Mobile platforms. Note this will not avoid the direct SPI flash connected to PCH requirement. 5.24.7 SPI Flash Device Recommended Pinout The table below contains the recommended serial flash device pin-out for an 8-pin device. Use of the recommended pin-out on an 8-pin device reduces complexities involved with designing the serial flash device onto a motherboard and allows for support of a common footprint usage model (see Section 5.24.8.1). Table 5-56. Recommended Pinout for 8-Pin Serial Flash Device Pin # Signal 1 Chips Select 2 Data Output 3 Write Protect 4 Ground 5 Data Input 6 Serial Clock 7 Hold / Reset 8 Supply Voltage Although an 8-pin device is preferred over a 16-pin device due to footprint compatibility, the following table contains the recommended serial flash device pin-out for a 16-pin SOIC. Datasheet 267 Functional Description 5.24.8 Serial Flash Device Package Table 5-57. Recommended Pinout for 16-Pin Serial Flash Device Pin # 5.24.8.1 Signal Pin # Signal 1 Hold / Reset 9 Write Protect 2 Supply Voltage 10 Ground 3 No Connect 11 No Connect 4 No Connect 12 No Connect 5 No Connect 13 No Connect 6 No Connect 14 No Connect 7 Chip Select 15 Serial Data In 8 Serial Data Out 16 Serial Clock Common Footprint Usage Model To minimize platform motherboard redesign and to enable platform Bill of Material (BOM) selectability, many PC System OEM's design their motherboard with a single common footprint. This common footprint allows population of a soldered down device or a socket that accepts a leadless device. This enables the board manufacturer to support, using selection of the appropriate BOM, either of these solutions on the same system without requiring any board redesign. The common footprint usage model is desirable during system debug and by flash content developers since the leadless device can be easily removed and reprogrammed without damage to device leads. When the board and flash content is mature for highvolume production, both the socketed leadless solution and the soldered down leaded solution are available through BOM selection. 5.24.8.2 Serial Flash Device Package Recommendations It is highly recommended that the common footprint usage model be supported. An example of how this can be accomplished is as follows: * The recommended pinout for 8-pin serial flash devices is used (see Section 5.24.7). * The 8-pin device is supported in either an 8-contact VDFPN (6x5 mm MLP) package or an 8-contact WSON (5x6 mm) package. These packages can fit into a socket that is land pattern compatible with the wide body SO8 package. * The 8-pin device is supported in the SO8 (150 mil) and in the wide-body SO8 (200 mil) packages. The 16-pin device is supported in the SO16 (300 mil) package. 268 Datasheet Functional Description 5.25 Intel(R) Quiet System Technology (Intel(R) QST) (Desktop Only) The PCH implements 4 PWM and 4 TACH signals for Intel(R) Quiet System Technology (QST). Note: Intel(R) Quiet System Technology functionality requires a correctly configured system, including an appropriate processor, PCH with Intel(R) ME, Intel(R) ME Firmware, and system BIOS support. 5.25.1 PWM Outputs This signal is driven as open-drain. An external pull-up resistor is integrated into the fan to provide the rising edge of the PWM output signal. The PWM output is driven low during reset, which represents 0% duty cycle to the fans. After reset de-assertion, the PWM output will continue to be driven low until one of the following occurs: * The internal PWM control register is programmed to a non-zero value by the Intel(R) QST firmware. * The watchdog timer expires (enabled and set at 4 seconds by default). * The polarity of the signal is inverted by the Intel(R) QST firmware. Note that if a PWM output will be programmed to inverted polarity for a particular fan, then the low voltage driven during reset represents 100% duty cycle to the fan. 5.25.2 TACH Inputs This signal is driven as an open-collector or open-drain output from the fan. An external pull-up is expected to be implemented on the motherboard to provide the rising edge of the TACH input. This signal has analog hysteresis and digital filtering due to the potentially slow rise and fall times. This signal has a weak internal pull-up resistor to keep the input buffer from floating if the TACH input is not connected to a fan. 5.26 Feature Capability Mechanism A set of registers is included in the PCH LPC Interface (Device 31, Function 0, offset E0h-EBh) that allows the system software or BIOS to easily determine the features supported by the PCH. These registers can be accessed through LPC PCI configuration space, thus allowing for convenient single point access mechanism for chipset feature detection. This set of registers consists of: * Capability ID (FDCAP) * Capability Length (FDLEN) * Capability Version and Vendor-Specific Capability ID (FDVER) * Feature Vector (FVECT) Datasheet 269 Functional Description 5.27 PCH Display Interfaces and Intel(R) Flexible Display Interconnect Display is divided between processor and PCH. The processor houses memory interface, display planes, and pipes while PCH has transcoder and display interface or ports. Intel(R) FDI connects the processor and PCH display engine. The number of planes, pipes, and transcoders decide the number of simultaneous and concurrent display devices that can be driven on a platform. The PCH integrates one Analog, LVDS (mobile only) and three Digital Ports B, C, and D. Each Digital Port can transmit data according to one or more protocols. Digital Port B, C and D can be configured to drive natively HDMI, DisplayPort or DVI. Digital Port B also supports Serial Digital Video Out (SDVO) that converts one protocol to another. Digital Port D can be configured to drive natively Embedded DisplayPort (eDP). Each display port has control signals that may be used to control, configure and/or determine the capabilities of an external device. The PCH's Analog Port uses an integrated 340.4 MHz RAMDAC that can directly drive a standard progressive scan analog monitor up to a resolution of 2048x1536 pixels with 32-bit color at 75 Hz. The PCH SDVO port (configured through Digital Port B) is capable of driving a 200 MP (Megapixels/second) rate. Each Digital Port is capable of driving resolutions up to 2560x1600 at 60 Hz through DisplayPort and 1920x1200 at 60 Hz using HDMI or DVI (with reduced blanking). 5.27.1 Analog Display Interface Characteristics The Analog Port provides a RGB signal output along with a HSYNC and VSYNC signal. There is an associated Display Data Channel (DDC) signal pair that is implemented using GPIO pins dedicated to the Analog Port. The intended target device is for a monitor with a VGA connector. Display devices such as LCD panels with analog inputs may work satisfactory but no functionality added to the signals to enhance that capability. Figure 5-14. Analog Port Characteristics 270 Datasheet Functional Description 5.27.1.1 Integrated RAMDAC The display function contains a RAM-based Digital-to-Analog Converter (RAMDAC) that transforms the digital data from the graphics and video subsystems to analog data for the VGA monitor. The PCH's integrated 340.4 MHz RAMDAC supports resolutions up to 2048x 1536 @ 75 Hz. Three 8-bit DACs provide the R, G, and B signals to the monitor. 5.27.1.1.1 Sync Signals HSYNC and VSYNC signals are digital and conform to TTL signal levels at the connector. Since these levels cannot be generated internal to the device, external level shifting buffers are required. These signals can be polarity adjusted and individually disabled in one of the two possible states. The sync signals should power up disabled in the high state. No composite sync or special flat panel sync support are included. 5.27.1.1.2 VESA/VGA Mode VESA/VGA mode provides compatibility for pre-existing software that set the display mode using the VGA CRTC registers. Timings are generated based on the VGA register values and the timing generator registers are not used. 5.27.1.2 DDC (Display Data Channel) DDC is a standard defined by VESA. Its purpose is to allow communication between the host system and display. Both configuration and control information can be exchanged allowing plug- and-play systems to be realized. Support for DDC 1 and 2 is implemented. The PCH uses the DDC_CLK and DDC_DATA signals to communicate with the analog monitor. The PCH will generate these signals at 2.5 V. External pull-up resistors and level shifting circuitry should be implemented on the board. 5.27.2 Digital Display Interfaces The PCH can drive a number of digital interfaces natively. The Digital Ports B, C, and/or D can be configured to drive HDMI, DVI, DisplayPort, and Embedded DisplayPort (port D only). The PCH provides a dedicated port for Digital Port LVDS (mobile only). 5.27.2.1 LVDS (Mobile only) LVDS for flat panel is compatible with the ANSI/TIA/EIA-644 specification. This is an electrical standard only defining driver output characteristics and receiver input characteristics. Each channel supports transmit clock frequency ranges from 25 MHz to 112 MHz, which provides a throughput of up to 784 Mbps on each data output and up to 112 MP/s on the input. When using both channels, each carry a portion of the data; thus, doubling the throughput to a maximum theoretical pixel rate of 224 MP/s. There are two LVDS transmitter channels (Channel A and Channel B) in the LVDS interface. Channel A and Channel B consist of 4-data pairs and a clock pair each. The LVDS data pair is used to transfer pixel data as well as the LCD timing control signals. Figure 5-15 shows a pair of LVDS signals and swing voltage. Datasheet 271 Functional Description Figure 5-15. LVDS Signals and Swing Voltage Logic values of 1s and 0s are represented by the differential voltage between the pair of signals. As shown in the Figure 5-16 a serial pattern of 1100011 represents one cycle of the clock. Figure 5-16. LVDS Clock and Data Relationship 5.27.2.2 LVDS Pair States The LVDS pairs can be put into one of five states: * * * * * Active Powered down Hi-Z Powered down 0 V Common mode Send zeros When in the active state, several data formats are supported. When in powered down state, the circuit enters a low power state and drives out 0V or the buffer is in the Hi-Z state on both the output pins for the entire channel. The common mode Hi-Z state is both pins of the pair set to the common mode voltage. When in the send zeros state, the circuit is powered up but sends only zero for the pixel color data regardless what the actual data is with the clock lines and timing signals sending the normal clock and timing data. The LVDS Port can be enabled/disabled using software. A disabled port enters a low power state. Once the port is enabled, individual driver pairs may be disabled based on the operating mode. Disabled drivers can be powered down for reduced power consumption or optionally fixed to forced 0s output. Individual pairs or sets of LVDS pairs can be selectively powered down when not being used. The panel power sequencing can be set to override the selected power state of the drivers during power sequencing. 272 Datasheet Functional Description 5.27.2.3 Single Channel versus Dual Channel Mode In the single channel mode, only Channel-A is used. Channel-B cannot be used for single channel mode. In the dual channel mode, both Channel-A and Channel-B pins are used concurrently to drive one LVDS display. In Single Channel mode, Channel A can take 18 bits of RGB pixel data, plus 3 bits of timing control (HSYNC/VSYNC/DE) and output them on three differential data pair outputs; or 24 bits of RGB (plus 4 bits of timing control) output on four differential data pair outputs. A dual channel interface converts 36 or 48 bits of color information plus the 3 or 4 bits of timing control respectively and outputs it on six or eight sets of differential data outputs respectively. Dual Channel mode uses twice the number of LVDS pairs and transfers the pixel data at twice the rate of the single channel. In general, one channel will be used for even pixels and the other for odd pixel data. The first pixel of the line is determined by the display enable going active and that pixel will be sent out Channel-A. All horizontal timings for active, sync, and blank will be limited to be on two pixel boundaries in the two channel modes. Note: Platforms using the PCH for integrated graphics support 24-bpp display panels of Type 1 only (compatible with VESA LVDS color mapping). 5.27.2.4 Panel Power Sequencing This section provides details for the power sequence timing relationship of the panel power, the backlight enable and the LVDS data timing delivery. to meet the panel power timing specification requirements two signals, LFP_VDD_EN and LFP_BKLT_EN, are provided to control the timing sequencing function of the panel and the backlight power supplies. A defined power sequence is recommended when enabling the panel or disabling the panel. The set of timing parameters can vary from panel to panel vendor, provided that they stay within a predefined range of values. The panel VDD power, the backlight on/ off state and the LVDS clock and data lines are all managed by an internal power sequencer. Figure 5-17. Panel Power Sequencing T4 T1+T2 TX T5 T3 T4 Panel On Panel VDD Enable Panel BackLight Enable Off Clock/Data Lines Valid Off Power On Sequence from off state and Power Off Sequence after full On NOTE: Support for programming parameters TX and T1 through T5 using software is provided. Datasheet 273 Functional Description 5.27.2.5 LVDS DDC The display pipe selected by the LVDS display port is programmed with the panel timing parameters that are determined by installed panel specifications or read from an onboard EDID ROM. The programmed timing values are then `locked' into the registers to prevent unwanted corruption of the values. From that point on, the display modes are changed by selecting a different source size for that pipe, programming the VGA registers, or selecting a source size and enabling the VGA. The LVDS DDC helps to read the panel timing parameters or panel EDID. 5.27.2.6 High Definition Multimedia Interface The High-Definition Multimedia Interface (HDMI) is provided for transmitting uncompressed digital audio and video signals from DVD players, set-top boxes and other audiovisual sources to television sets, projectors and other video displays. It can carry high quality multi-channel audio data and all standard and high-definition consumer electronics video formats. HDMI display interface connecting the PCH and display devices utilizes transition minimized differential signaling (TMDS) to carry audiovisual information through the same HDMI cable. HDMI includes three separate communications channels: TMDS, DDC, and the optional CEC (consumer electronics control) (not supported by the PCH). As shown in Figure 5-18, the HDMI cable carries four differential pairs that make up the TMDS data and clock channels. These channels are used to carry video, audio, and auxiliary data. In addition, HDMI carries a VESA Display. The DDC channel is used by an HDMI Source to determine the capabilities and characteristics of the Sink. Audio, video and auxiliary (control/status) data is transmitted across the three TMDS data channels. The video pixel clock is transmitted on the TMDS clock channel and is used by the receiver for data recovery on the three data channels. The digital display data signals driven natively through the PCH are AC coupled and needs level shifting to convert the AC coupled signals to the HDMI compliant digital signals. PCH HDMI interface is designed as per High-Definition Multimedia Interface Specification 1.4a. The PCH supports High-Definition Multimedia Interface Compliance Test Specification 1.4a. Figure 5-18. HDMI Overview 274 Datasheet Functional Description 5.27.2.7 Digital Video Interface (DVI) The PCH Digital Ports can be configured to drive DVI-D. DVI uses TMDS for transmitting data from the transmitter to the receiver which is similar to the HDMI protocol but the audio and CEC. Refer to the HDMI section for more information on the signals and data transmission. To drive DVI-I through the back panel the VGA DDC signals is connected along with the digital data and clock signals from one of the Digital Ports. When a system has support for a DVI-I port, then either VGA or the DVI-D through a single DVI-I connector can be driven but not both simultaneously. The digital display data signals driven natively through the PCH are AC coupled and needs level shifting to convert the AC coupled signals to the HDMI compliant digital signals. 5.27.2.8 Display Port* DisplayPort is a digital communication interface that utilizes differential signaling to achieve a high bandwidth bus interface designed to support connections between PCs and monitors, projectors, and TV displays. DisplayPort is also suitable for display connections between consumer electronics devices such as high definition optical disc players, set top boxes, and TV displays. A DisplayPort consists of a Main Link, Auxiliary channel, and a Hot Plug Detect signal. The Main Link is a uni-directional, high-bandwidth, and low latency channel used for transport of isochronous data streams such as uncompressed video and audio. The Auxiliary Channel (AUX CH) is a half-duplex bidirectional channel used for link management and device control. The Hot Plug Detect (HPD) signal serves as an interrupt request for the sink device. PCH is designed as per VESA DisplayPort Standard Version 1.1a. The PCH supports VESA DisplayPort* PHY Compliance Test Specification 1.1 and VESA DisplayPort* Link Layer Compliance Test Specification 1.1. Note: DisplayPort includes support for Dual-Mode operation. Figure 5-19. DP Overview 5.27.2.9 Embedded DisplayPort Embedded DisplayPort (eDP*) is an embedded version of the DisplayPort standard oriented towards applications such as notebook and All-In-One PC's. eDP is supported only on Digital Port D. Like DisplayPort, Embedded DisplayPort also consists of a Main Link, Auxiliary channel, and a optional Hot Plug Detect signal. Datasheet 275 Functional Description The eDP support on desktop PCH is possible because of the addition of the panel power sequencing pins: L_VDD, L_BKLT_EN and L_BLKT_CTRL. The eDP on the PCH can be configured for 2 or 4 lanes. PCH supports Embedded DisplayPort* (eDP*) Standard Version 1.1. 5.27.2.10 DisplayPort Aux Channel A bi-directional AC coupled AUX channel interface replaces the I2C for EDID read, link management and device control. I2C-to-Aux bridges are required to connect legacy display devices. 5.27.2.11 DisplayPort Hot-Plug Detect (HPD) The PCH supports HPD for Hot-Plug sink events on the HDMI and DisplayPort interface. 5.27.2.12 Integrated Audio over HDMI and DisplayPort DisplayPort and HDMI interfaces on PCH support audio. Table 5-58 shows the supported audio technologies on the PCH. Table 5-58. PCH supported Audio formats over HDMI and DisplayPort* Audio Formats HDMI DisplayPort AC-3 - Dolby* Digital Yes No Dolby* Digital Plus Yes No DTS-HD* Yes No LPCM, 192 KHz/24 bit, 8 Channel Yes Yes (two channel - up to 96 KHz 24 bit) Yes No Dolby True HD, DTS-HD Master Audio (Losses Blu-Ray Audio Format) PCH adds support for Silent stream. Silent stream is a integrated audio feature that enables short audio streams such as system events to be heard over the HDMI and DisplayPort monitors. PCH supports silent streams over the HDMI and DisplayPort interfaces at 48 kHz, 96 kHz, and 192 kHz sampling rates. 5.27.2.13 Serial Digital Video Out (SDVO) Serial Digital Video Out (SDVO) sends display data in serialized format which then can be converted into appropriate display protocol using a SDVO device. Serial Digital Video Out (SDVO) supports SDVO-LVDS only on the PCH. Though the SDVO electrical interface is based on the PCI Express interface, the protocol and timings are completely unique. The PCH utilizes an external SDVO device to translate from SDVO protocol and timings to the desired display format and timings. SDVO is supported only on Digital Port B of the PCH. 276 Datasheet Functional Description Figure 5-20. SDVO Conceptual Block Diagram TV Clock in Stall Interrupt PCH SDVO B Control Clock Control Data RED B 3rd Party SDVO External Device LVDS Panel GREEN B BLUE B 5.27.2.14 Control Bus Communication to SDVO registers and if utilized, ADD2 PROMs and monitor DDCs, are accomplished by using the SDVOCTRLDATA and SDVOCTRLCLK signals through the SDVO device. These signals run up to 400 kHz and connect directly to the SDVO device. The SDVO device is then responsible for routing the DDC and PROM data streams to the appropriate location. Consult SDVO device data sheets for level shifting requirements of these signals. Datasheet 277 Functional Description 5.27.3 Mapping of Digital Display Interface Signals Table 5-59. PCH Digital Display Port Pin Mapping Port Description Port B DisplayPort Signals HDMI Signals TMDSB_CLK SDVOB_CLK DDPB_[3]P DPB_LANE3# TMDSB_CLKB SDVOB_CLK# DDPB_[3]N DPB_LANE2 TMDSB_DATA0 SDVOB_BLUE DDPB_[2]P DPB_LANE2# TMDSB_DATA0B SDVOB_BLUE# DDPB_[2]N DPB_LANE1 TMDSB_DATA1 SDVOB_GREEN DDPB_[1]P DPB_LANE1# TMDSB_DATA1B SDVOB_GREEN# DDPB_[1]N DPB_LANE0 TMDSB_DATA2 SDVOB_RED DDPB_[0]P DPB_LANE0# TMDSB_DATA2B SDVOB_RED* DDPB_[0]N DPB_HPD TMDSB_HPD 278 DDPB_HPD DDPB_AUXP DDPB_AUXN DPB_AUXB DPC_LANE3 port D PCH Display Port Pin details DPB_LANE3 DPB_AUX Port C SDVO Signals TMDSC_CLK DDPC_[3]P DPC_LANE3# TMDSC_CLKB DDPC_[3]N DPC_LANE2 TMDSC_DATA0 DDPC_[2]P DPC_LANE2# TMDSC_DATA0B DDPC_[2]N DPC_LANE1 TMDSC_DATA1 DDPC_[1]P DPC_LANE1# TMDSC_DATA1B DDPC_[1]N DPC_LANE0 TMDSC_DATA2 DDPC_[0]P DPC_LANE0# TMDSC_DATA2B DDPC_[0]N DPC_HPD TMDSC_HPD DDPC_HPD DPC_AUX DDPC_AUXP DPC_AUXC DDPC_AUXN DPD_LANE3 TMDSD_CLK DDPD_[3]P DPD_LANE3# TMDSD_CLKB DDPD_[3]N DPD_LANE2 TMDSD_DATA0 DDPD_[2]P DPD_LANE2# TMDSD_DATA0B DDPD_[2]N DPD_LANE1 TMDSD_DATA1 DDPD_[1]P DPD_LANE1# TMDSD_DATA1B DDPD_[1]N DPD_LANE0 TMDSD_DATA2 DDPD_[0]P DPD_LANE0# TMDSD_DATA2B DDPD_[0]N DPD_HPD TMDSD_HPD DDPD_HPD DPD_AUX DDPD_AUXP DPD_AUXD DDPD_AUXN Datasheet Functional Description 5.27.4 Multiple Display Configurations The following multiple display configuration modes are supported (with appropriate driver software): * Single Display is a mode with one display port activated to display the output to one display device. * Intel(R) Dual Display Clone is a mode with two display ports activated to drive the display content of same color depth setting but potentially different refresh rate and resolution settings to all the active display devices connected. * Extended Desktop is a mode with two display ports activated used to drive the content with potentially different color depth, refresh rate, and resolution settings on each of the active display devices connected. Table 5-61 describes the valid interoperability between display technologies. Table 5-60. Display Co-Existence Table Display Not Attached DAC VGA Integrated LVDS Integrated DisplayPort* HDMI*/ DVI eDP* Not Attached X S S S S S DAC S X S1, C, E A A S1, C, E Integrated LVDS S S1, C, E X S1, C, E S1, C, E X Integrated DisplayPort S A S1, C, E A A S1, C, E HDMI/DVI S A S1, C, E A S1, C, E S1, C, E SDVO LVDS S S1, C, E S1, C, E S1, C, E S1, C, E A eDP S S1, C, E X S1, C, E S1, C, E X VGA * A = Single Pipe Single Display, Intel(R) Dual Display Clone (Only 24-bpp), or Extended Desktop Mode * C = Clone Mode * E = Extended Desktop Mode * S = Single Pipe Single Display * S1 = Single Pipe Single Display With One Display Device Disabled * X = Unsupported/Not Applicable 5.27.5 High-bandwidth Digital Content Protection (HDCP) HDCP is the technology for protecting high definition content against unauthorized copy or unreceptive between a source (computer, digital set top boxes, etc.) and the sink (panels, monitor and TVs). The PCH supports HDCP 1.4 for content protection over wired displays (HDMI, DVI and DisplayPort). The HDCP 1.4 keys are integrated into the PCH and customers are not required to physically configure or handle the keys. Datasheet 279 Functional Description 5.27.6 Intel(R) Flexible Display Interconnect Intel(R) FDI connects the display engine in the processor with the display interfaces on the PCH. The display data from the frame buffer is processed in the display engine of the processor and sent to the PCH over the Intel FDI where it is transcoded as per the display protocol and driven to the display monitor. Intel FDI has two channels A and B. Each channel has 4 lanes and total combined is 8 lanes to transfer the data from the processor to the PCH. Depending on the data bandwidth the interface is dynamically configured as x1, x2 or x4 lanes. Intel FDI supports lane reversal and lane polarity reversal. 5.28 Intel(R) Virtualization Technology Intel(R) Virtualization Technology (Intel(R) VT) makes a single system appear as multiple independent systems to software. This allows for multiple, independent operating systems to be running simultaneously on a single system. Intel(R) VT comprises technology components to support virtualization of platforms based on Intel architecture microprocessors and chipsets. The first revision of this technology (Intel(R) VT-x) added hardware support in the processor to improve the virtualization performance and robustness. The second revision of this specification (Intel(R) VT-d) adds chipset hardware implementation to improve I/O performance and robustness. The Intel(R) VT-d spec and other VT documents can be referenced here: http:// www.intel.com/technology/platform-technology/virtualization/index.htm 5.28.1 Intel(R) VT-d Objectives The key Intel(R) VT-d objectives are domain based isolation and hardware based virtualization. A domain can be abstractly defined as an isolated environment in a platform to which a subset of host physical memory is allocated. Virtualization allows for the creation of one or more partitions on a single system. This could be multiple partitions in the same OS or there can be multiple operating system instances running on the same system offering benefits such as system consolidation, legacy migration, activity partitioning or security. 5.28.2 Intel(R) VT-d Features Supported * The following devices and functions support FLR in the PCH: -- High Definition Audio (Device 27: Function 0) -- SATA Host Controller 1 (Device 31: Function 2) -- SATA Host Controller 2 (Device 31: Function 5) -- USB2 (EHCI) Host Controller 1 (Device 29: Function 0) -- USB2 (EHCI) Host Controller 2 (Device 26: Function 0) -- GbE Lan Host Controller (Device 25: Function 0) * Interrupt virtualization support for IOxAPIC * Virtualization support for HPETs 280 Datasheet Functional Description 5.28.3 Support for Function Level Reset (FLR) in Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Intel(R) VT-d allows system software (VMM/OS) to assign I/O devices to multiple domains. The system software, then, requires ways to reset I/O devices or their functions within, as it assigns/re-assigns I/O devices from one domain to another. The reset capability is required to ensure the devices have undergone proper re-initialization and are not keeping the stale state. A standard ability to reset I/O devices is also useful for the VMM in case where a guest domain with assigned devices has become unresponsive or has crashed. PCI Express defines a form of device hot reset which can be initiated through the Bridge Control register of the root/switch port to which the device is attached. However, the hot reset cannot be applied selectively to specific device functions. Also, no similar standard functionality exists for resetting root-complex integrated devices. Current reset limitations can be addressed through a function level reset (FLR) mechanism that allows software to independently reset specific device functions. 5.28.4 Virtualization Support for PCH's IOxAPIC The VT-d architecture extension requires Interrupt Messages to go through the similar Address Remapping as any other memory requests. This is to allow domain isolation for interrupts such that a device assigned in one domain is not allowed to generate interrupts to another domain. The Address Remapping for VT-d is based on the Bus:Device:Function field associated with the requests. Hence, it is required for the internal IOxAPIC to initiate the Interrupt Messages using a unique Bus:Device:Function. The PCH supports BIOS programmable unique Bus:Device:Function for the internal IOxAPIC. The Bus:Device:Function field does not change the IOxAPIC functionality in anyway, nor promoting IOxAPIC as a stand-alone PCI device. The field is only used by the IOxAPIC in the following: * As the Requestor ID when initiating Interrupt Messages to the processor * As the Completer ID when responding to the reads targeting the IOxAPIC's Memory-Mapped I/O registers 5.28.5 Virtualization Support for High Precision Event Timer (HPET) The VT-d architecture extension requires Interrupt Messages to go through the similar Address Remapping as any other memory requests. This is to allow domain isolation for interrupts such that a device assigned in one domain is not allowed to generate interrupts to another domain. The Address Remapping for VT-d is based on the Bus:Device:Function field associated with the requests. Hence, it is required for the HPET to initiate the direct FSB Interrupt Messages using unique Bus:Device:Function. The PCH supports BIOS programmable unique Bus:Device:Function for each of the HPET timers. The Bus:Device:Function field does not change the HPET functionality in anyway, nor promoting it as a stand-alone PCI device. The field is only used by the HPET timer in the following: * As the Requestor ID when initiating direct interrupt messages to the Processor * As the Completer ID when responding to the reads targeting its Memory-Mapped registers The registers for the programmable Bus:Device:Function for HPET timer 7:0 reside under the Device 31:Function 0 LPC Bridge's configuration space. Datasheet 281 Functional Description 5.29 Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Platform Clocks PCH-based platforms require several single-ended and differential clocks to synchronize signal operation and data propagation system-wide between interfaces, and across clock domains. Depending on implementation, the clocks will either be provided by a third-party clock chip, in buffered mode, or by the PCH itself. In buffered mode, the clock chip provides the following clocks to the PCH: * 133-MHz differential, SSC capable * 100-MHz differential, SSC capable * 100-MHz differential isolated for SATA, SSC capable * 96 MHz differential * 14.318 MHz single-ended * Some clock chips may have an additional 25-Mhz single-ended output. This output is typically provided for LAN clocking and will not be routed through the PCH. The output signals from the PCH are: * 1x 133-MHz differential source for processor and memory, reusable as a 100-MHz PCI Express * Gen. 1.1 clock source. * 1x 100-MHz differential source for DMI (PCI Express* 2.0 jitter tolerant) * 2x 100-MHz differential sources for PCI Express* 2.0 * 8x 100-MHz differential sources for PCI Express* 1.1 * 5x 33.3 MHz single-ended source for PCI (1x of these is reserved as loopback clock) * 1x 120-MHz differential source for onboard DisplayPort, reusable as a processor clock source * 2x flexible single-ended outputs that can range from 14.31818 OR 48 MHz usable for USB, legacy platform functions, etc. 5.29.1 Platform Clocking Requirements Providing a platform-level clocking solution uses multiple system components including: * Intel(R) 5 Series Chipset or Intel(R) 3400 Series Chipset * 3rd party clock chip * Intel CK505 clock specification * 25 MHz Crystal source 282 Datasheet Ballout Definition 6 Ballout Definition This chapter contains the PCH ballout information. 6.1 PCH Desktop Ballout This section contains the PCH Desktop ballout. Figure 6-1 and Figure 6-2 show the ballout from a top of the package quadrant view. Table 6-1 is the BGA ball list, sorted alphabetically by signal name. Datasheet 283 Ballout Definition Figure 6-1. BA 1 Vss_NCTF AY AW TP22_NCT Vcc3_3_NC F TF Vss_NCTF --- PCH Ballout (top view--left side) (Desktop) AV AU AT AR AP AN AM AL AK AJ AH AG AF AE AD AC AB AA --- AD14 --- Vss --- V5REF --- --- CLKOUTFL EX1 / GPIO65 --- VccME --- VccADAC --- --- CRT_RED --- VccAClk 1 --- CRT_DDC_ CLK --- DAC_IREF Vss --- CRT_BLUE --- 2 3 2 Vss_NCTF 3 Vcc3_3_NC TF Vcc3_3 --- AD23 --- Vcc3_3 Vss C/BE0# AD12 --- AD9 4 --- REQ2# / GPIO52 PIRQH# / GPIO5 --- --- PERR# PIRQB# 5 PIRQD# --- REQ1# / GPIO50 Vss Vss AD21 --- 6 --- C/BE1# --- SERR# AD2 DEVSEL# --- AD13 --- AD16 AD22 --- AD15 GNT3# / GPIO55 CLKOUTFL EX3 / GPIO67 --- Vss --- VccME --- Vss Vss CRT_VSYN CRT_GRE C EN --- XCLK_RCO MP REQ0# --- AD18 AD24 --- VccME VccME CRT_DDC_ DATA --- Vss CRT_HSYN C --- CRT_IRTN Vss 4 C/BE2# Vss --- --- Vss VccME --- VccME Vss --- --- Vss Vss --- 5 PAR AD29 --- TRDY# GNT1# / GPIO51 --- VccME --- CLKOUT_P CI0 --- Vss --- CLKOUTFL EX2 / GPIO66 --- 6 VccME 7 Vss --- AD10 AD7 --- --- --- IRDY# AD27 --- FRAME# AD28 --- PIRQF# / GPIO3 --- REFCLK14I N --- CLKOUT_P CI1 --- DDPD_CT RLCLK --- 7 8 --- AD19 --- AD5 PIRQE# / GPIO2 PIRQA# AD11 --- STOP# --- Vss Vss --- REQ3# / GPIO54 --- VccME --- Vss --- Vss --- 8 9 GNT2# / GPIO53 --- AD8 --- Vss AD0 AD6 AD4 --- --- AD26 Vss --- Vss --- CLKOUT_P CI2 --- CLKOUT_P CI3 --- DDPD_CT RLDATA --- 9 --- CLKOUTFL EX0 / GPIO64 --- DDPC_CT RLCLK --- 10 --- 11 10 --- AD3 C/BE3# AD25 11 --- TACH3 / GPIO7 TACH0 / GPIO17 TACH2 / GPIO6 12 PWM0 --- PWM2 13 --- PWM3 --- 14 Vss --- 15 --- USBRBIAS # --- USBRBIAS 16 USBP13P --- V5REF_Su s --- 17 --- USBP13N Vss USBP10N --- --- --- --- --- AD31 Vss AD20 AD17 CLKIN_PCI LOOPBAC K Vss GNT0# --- PCIRST# --- VccME --- Vss --- DDPC_CT RLDATA Vss --- CLKOUT_P CI4 --- SDVO_CT RLDATA --- 12 VccME --- VccME --- SDVO_CT RLCLK --- 13 --- --- 14 VccME VccME 15 VccME 16 --- 17 --- PIRQC# Vss AD1 Vss FWH0 / LAD0 PWM1 PIRQG# / GPIO4 Vss Vss LDRQ0# PLOCK# --- AD30 --- --- --- --- --- --- --- --- --- VccME --- --- Vss FWH4 / LFRAME# LDRQ1# / GPIO23 Vss Vss TACH1 / GPIO1 Vcc3_3 Vcc3_3 --- --- --- --- --- --- HDA_SYN C --- --- --- --- --- --- --- --- Vss --- Reserved VccME VccME --- Vss GPIO33 GPIO13 HDA_SDO HDA_SDIN 3 FWH3 / LAD3 FWH2 / LAD2 FWH1 / LAD1 Vcc3_3 Vcc3_3 --- VccME VccME VccME --- VccME --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Vss Vss USBP12P USBP12N VccSusHD A Vcc3_3 --- Vss VccCore VccCore --- Vss VccME 18 --- VccCore VccCore Vss --- Vss Vss 19 HDA_SDIN HDA_SDIN 0 2 HDA_BCLK HDA_RST# --- --- PME# --- Vss 18 --- USBP8P Vss USBP10P --- Vss Vss HDA_SDIN 1 19 USBP8N --- USBP7P --- Vss --- --- --- --- --- --- --- --- Vss 20 --- USBP5N --- USBP7N Vss USBP11P USBP11N Vss USBP9P USBP9N USBP6P USBP6N Vss VccIO --- VccCore VccCore VccCore --- Vss Vss 20 21 Vss --- USBP5P USBP4N --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 21 22 --- USBP2P --- USBP4P Vss Vss USBP3N USBP3P Vss Vss VccIO VccIO --- VccCore VccCore Vss --- Vss Vss 22 23 USBP1N --- USBP2N --- Vss --- --- --- --- --- --- --- --- VccIO --- VccCore VccCore VccCore --- Vss VccCore 23 CLKIN_DO CLKIN_DO T_96N T_96P 24 --- USBP1P Vss Vss --- TP9 TP10 Vss INTRUDER # PWROK RSMRST# RTCRST# Vss Vss --- VccCore VccCore Vss --- VccCore VccCore 24 25 --- USBP0P USBP0N VccSus3_3 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 25 26 VccSus3_3 --- VccSus3_3 27 --- VccSus3_3 --- --- VccSus3_3 VccSus3_3 VccSus3_3 VccSus3_3 VccSus3_3 VccSus3_3 VccSus3_3 VccSus3_3 VccSus3_3 VccSus3_3 --- --- --- --- Vss Vss --- Vss VccCore VccCore --- VccCore VccIO 26 --- --- --- --- Vss --- DcpSusByp Vcc3_3 Vcc3_3 --- Vss VccIO 27 OC2# / GPIO41 Vss --- --- --- --- --- --- --- --- 28 --- Vss --- Vss --- Vss --- Vss --- 29 28 Vss --- Vss Vss --- VccIO Vss SRTCRST# Vss Vss OC5# / GPIO9 29 --- VccRTC --- VccSus3_3 Vss --- --- --- --- --- --- --- 30 RTCX2 --- RTCX1 --- Vss OC7# / GPIO14 OC6# / GPIO10 GPIO8 Vss OC1# / GPIO40 Vss OC3# / GPIO42 --- OC0# / GPIO59 SML1DATA / GPIO75 OC4# / GPIO43 SST SMBCLK --- --- --- --- --- Vss Vss RI# WAKE# PCIECLKR Q3# / GPIO25 --- --- GPIO24 --- JTAG_TDO --- SLP_S4# PCIECLKR Q0# / GPIO73 --- PCIECLKR Q7# / GPIO46 TP19 31 --- SML1CLK / LAN_RST# INTVRMEN GPIO58 32 --- SML1ALER T# / DRAMPWR GPIO74 / OK CLK_CFG_ SEL2 33 SML0ALER T# / GPIO60 / CLK_CFG_ SEL3 --- SML0CLK --- 34 --- GPIO72 --- PLTRST# 35 SLP_LAN# / GPIO29 --- PEG_B_CL KRQ# / GPIO56 SLP_S3# --- GPIO15 --- PCIECLKR Q6# / GPIO45 SLP_S5# / GPIO63 SLP_M# --- PCIECLKR Q4# / GPIO26 Vss GPIO30 / PROC_MIS SING DcpRTC PCIECLKR Q5# / GPIO44 Vss PCIECLKR SYS_PWR SATA3GP / Q2# / OK GPIO37 GPIO20 36 37 38 --- Vss --- Vss --- INIT3_3V# --- SATALED# GPIO28 --- STP_PCI# / GPIO34 --- GPIO31 --- Vss_NCTF --- Vss --- GPIO35 --- SCLOCK / GPIO22 AW AV AU AT AR AP AN VccSus3_3 VccSus3_3 VccSus3_3 _NCTF _NCTF 41 TP22_NCT Vss_NCTF F 284 GPIO27 --- 40 AY --- TP20 VccRTC_N CTF BA --- --- PEG_A_CL KRQ# / GPIO47 39 --- --- LAN_PHY_ PWR_CTR SML0DATA L / GPIO12 VccSus3_3 --- TP21 --- DcpSus --- Vss --- Vss --- 30 --- SUSCLK / GPIO62 --- Vss --- Vss --- SATA2TXN --- 31 --- Vss --- Vss --- SATA5TXP --- SATA2TXP --- 32 MEPWROK JTAG_TCK --- DcpSST --- Vss --- SATA5TXN --- Vss --- 33 --- JTAG_TMS Vss --- Vss --- SATA5RXP --- Vss --- Vss --- 34 --- TRST# TP18 --- TP23 --- SATA5RXN --- SATA2RXP --- SATA1TXP --- 35 --- JTAG_TDI PWRBTN# --- Vss --- Vss --- SATA2RXN --- SATA1TXN --- 36 Vss SATA0GP / GPIO21 --- A20GATE Vss --- --- Vss SATA3TXN --- 37 --- SATA3TXP Vss 38 SMBALERT SUS_STAT SMBDATA # / GPIO11 # / GPIO61 --- SLOAD / GPIO38 GPIO57 --- SYS_RESE T# Vss --- PCIECLKR SDATAOUT SATA2GP / Q1# / GPIO36 0 / GPIO39 GPIO18 RCIN# SPKR SDATAOU SATA1GP / T1 / GPIO19 GPIO48 --- SATA4TXP SATA4TXN --- SATA4GP / GPIO16 / CLK_CFG_ SEL1 --- Vss Vss Vss SATA3RXP --- Vss 39 GPIO32 --- SATA5GP / GPIO49 / TEMP_ALE RT# --- SATA4RXP Vss --- Vss --- 40 41 SERIRQ --- --- --- GPIO0 --- Vss --- SATA4RXN --- --- SATA3RXN --- Vss AM AL AK AJ AH AG AF AE AD AC AB AA Datasheet Ballout Definition Figure 6-2. PCH Ballout (top view--right side) (Desktop) Y W V U T R P N M L K J H G F E D C B A 1 --- CLKOUT_P CIE0P --- --- VccADPLLB --- Vss --- DDPB_AUX P --- --- DDPB_HPD --- Vss --- Vss_NCTF --- Vss_NCTF --- --- 1 2 XTAL25_O UT --- CLKOUT_P CIE0N Vss --- VccADPLLA --- SDVO_STA LLP --- DDPB_AUX N Vss --- DDPD_HPD --- DDPC_1P --- DDPC_3N VccVRM Vss_NCTF --- 2 3 --- Vss Vss Vss Vss --- SDVO_STA LLN --- SDVO_INT P Vss Vss DDPC_HPD --- DDPC_1N --- DDPC_0P DDPC_3P VccVRM --- TP22_NCTF 3 --Vss CLKOUT_P CLKOUT_P CIE6P CIE6N DDPD_AUX DDPD_AUX N P 4 XTAL25_IN --- --- Vss Vss SDVO_INT N 5 Vss Vss --- --- Vss Vss --- Vss 6 CLKOUT_P EG_A_N --- Vss --- CLKOUT_P CIE7P --- CLKOUT_P CIE4P --- 7 CLKOUT_P EG_A_P --- CLKOUT_P EG_B_N --- CLKOUT_P CIE7N --- CLKOUT_P CIE4N --- 8 CLKOUT_P CIE5N --- CLKOUT_P EG_B_P --- Vss --- Vss --- 9 CLKOUT_P CIE5P --- Vss --- CLKOUT_P CIE1P --- TP13 --- CLKOUT_P DDPC_AUX CIE3N P CLKOUT_P DDPC_AUX CIE3P N --- DDPB_3N DDPB_3P DDPC_0N Vss --- DDPC_2N DDPC_2P --- 4 --- Vss Vss --- Vss Vss --- DDPD_0P --- Vss_NCTF 5 CLKOUT_P SDVO_TVC CIE2N LKINP --- Vss DDPB_2P --- DDPB_2N Vss DDPD_1P --- DDPD_0N --- 6 CLKOUT_P SDVO_TVC CIE2P LKINN --- Vss Vss --- --- --- DDPD_1N PERn8 --- Vss 7 --- DDPB_0N --- DDPD_2N DDPD_2P Vss PERn6 --- PERp8 --- 8 --- --- Vss DDPD_3N DDPD_3P Vss --- PERp6 --- Vcc3_3 9 10 Vss --- Vss 10 Vss --- Reserved --- CLKOUT_P CIE1N --- TP12 --- DDPB_0P --- --- --- --- --- PETp7 Vss Vss --- 11 Reserved --- Reserved --- Vss --- Vss --- Vss Vss DDPB_1P DDPB_1N PETp6 PETn6 Vss --- PETn7 Vss PERp7 --- 11 12 Reserved --- Vss --- TP7 --- TP4 --- Vss Vss PETn8 PETp8 PETn5 PETp5 Vss Vss --- PERn5 --- PERn7 12 13 Vss --- Vss --- TP6 --- TP5 --- --- --- --- --- --- --- --- Vss PERp4 --- PERp5 --- 13 14 --- --- --- --- --- --- --- Vss Vss PETp4 PETn4 Vss PETn3 PETp3 Vss --- PERn4 PERp3 --- Vss 14 15 VccME --- VccIO VccIO VccIO --- VccIO --- --- --- --- --- --- --- --- Vss PERn1 --- PERn3 --- 15 16 VccME --- Vss Vss Vss --- VccIO VccIO VccIO Vss Vss Vss PETn2 PETp2 Vss Vss --- PERp1 --- PERp2 16 17 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- PETp1 Vss PERn2 --- 17 18 VccME --- Vss Vss Vss --- VccIO VccIO VccIO TP1 TP2 Vss DMI3RXP DMI3RXN Vss --- PETn1 Vss DMI0RXP --- 18 19 VccME --- Vss VccIO VccIO --- VccIO --- --- --- --- --- --- --- --- Vss --- DMI1RXP --- DMI0RXN 19 20 VccLAN --- TP11 VccCore VccCore --- Vss VccIO VccIO Vss Vss TP3 Vss DMI2RXN DMI2RXP --- DMI1RXN --- 20 DMI_ZCOM P 21 CLKIN_DMI CLKIN_DMI _N _P 21 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DMI_IRCO MP --- VccAPLLEX P 22 VccLAN --- Vss VccCore VccCore --- Vss VccIO VccIO Vss Vss DMI0TXN DMI0TXP DMI1TXN DMI1TXP Vss Vss --- Vss --- 22 23 VccCore --- VccCore VccCore VccCore --- Vss --- --- --- --- --- --- --- --- Vss --- Vss --- VccDMI 23 24 VccCore --- VccCore Vss VccCore --- VccIO VccIO VccIO DMI3TXN DMI3TXP Vss DMI2TXN DMI2TXP Vss --- VccIO VccIO VccIO --- 24 25 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VccIO VccIO VccIO --- 25 26 VccIO --- VccCore VccCore VccCore --- VccCore VccIO VccIO VccIO VccIO VccIO VccIO VccIO VccIO VccCore --- VccCore --- VccCore 26 27 Vss --- Vss Vss VccCore --- VccCore --- --- --- --- --- --- --- --- VccCore VccCore --- VccCore --- 27 28 --- --- --- --- --- --- --- VccCore VccCore VccCore VccCore VccCore VccCore VccCore VccCore --- VccCore VccCore --- VccCore 28 29 VccIO --- VccIO --- VccIO --- VccCore --- --- --- --- --- --- --- --- VccCore VccCore --- VccCore --- 29 30 Vss --- SPI_MISO --- VccIO --- VccPNAND --- Reserved Vss FDI_RXN0 FDI_RXP0 FDI_RXN1 FDI_RXP1 Vss Vss --- FDI_RXN5 --- Vss 30 31 CLKIN_BCL K_P --- SPI_CLK --- Reserved --- Vss --- Reserved Vss FDI_RXN4 FDI_RXP4 Vss FDI_RXP3 FDI_RXN3 --- FDI_RXN2 Vss FDI_RXP5 --- 31 32 CLKIN_BCL K_N --- SPI_CS0# --- SPI_CS1# --- Reserved --- Reserved Vss Vss --- --- --- --- --- FDI_RXP2 Vss FDI_RXP6 --- 32 33 Vss --- Vss --- Reserved --- Reserved --- Vss Reserved --- --- Reserved Reserved Reserved Vss --- FDI_RXN7 --- FDI_RXN6 33 34 CLKIN_SAT A_N / CKSSCD_N --- TP8 --- SPI_MOSI --- Vss --- Reserved Vss --- NV_ALE --- Vss Vss FDI_FSYNC 0 Vss --- FDI_RXP7 --- 34 35 CLKIN_SAT A_P / CKSSCD_P --- Vss --- Vss --- Reserved --- Reserved NV_CLE --- Reserved Reserved --- --- --- --- Vss 35 36 VccIO --- VccIO --- VccIO --- Reserved --- Reserved Reserved --- Reserved Reserved --- Reserved FDI_FSYNC 1 PECI --- FDI_INT --- 36 Vss CLKOUT_D P_N / CLKOUT_B CLK1_N --- Reserved Vss Vss PMSYNCH --- VccFDIPLL 37 --- CLKOUT_D P_P / CLKOUT_B CLK1_P Vss Reserved --- --- --- 38 Vss --- Vss --- Reserved Vss Vss V_CPU_IO V_CPU_IO_ NCTF 39 Vss_NCTF Vss_NCTF 40 FDI_LSYNC FDI_LSYNC 1 0 37 SATA1RXP Vss --- --- VccIO VccIO --- Vss Vss 38 SATA1RXN --- SATA0TXP SATA0TXN --- VccIO VccIO VccME3_3 --- 39 --- Vss Vss Vss SATAICOM PI --- VccIO --- VccPNAND VccVRM Vss 40 Vss --- SATA0RXP Vcc3_3 --- VccIO --- VccME3_3 --- VccVRM Vss --- CLKOUT_D MI_N --- Reserved --- Reserved --- --- VccSATAPL L --- VccPNAND --- --- CLKOUT_D MI_P --- Vss --- Reserved --- Vss_NCTF R P N M L K J H G F E D C 41 --- SATA0RXN --- --- SATAICOM PO Y W V U T Datasheet --- --- CLKOUT_B CLKOUT_B CLK0_N / CLK0_P / CLKOUT_P CLKOUT_P CIE8N CIE8P THRMTRIP PROCPWR # GD Vss_NCTF TP22_NCTF B A 285 41 Ballout Definition Table 6-1. PCH Ballout by Signal name (Desktop Only) PCH Desktop Ball Name A20GATE 286 Ball # AG37 AD0 AT9 AD1 AP11 AD2 AU6 AD3 AY10 AD4 AP9 AD5 AV8 AD6 AR9 PCH Desktop Ball Name Ball # CLKIN_PCILOOPBA CK AL11 CLKOUTFLEX2 / GPIO66 AB6 CLKIN_SATA_N / CKSSCD_N Y34 CLKOUTFLEX3 / GPIO67 AL3 CLKIN_SATA_P / CKSSCD_P Y35 CRT_BLUE AB2 CRT_DDC_CLK AG2 CLKOUT_BCLK0_N / CLKOUT_PCIE8N L38 CRT_DDC_DATA AG4 CLKOUT_BCLK0_P / CLKOUT_PCIE8P K38 CLKOUT_DMI_N H40 CLKOUT_DMI_P J41 CLKOUT_DP_N / CLKOUT_BCLK1_N H37 H38 PCH Desktop Ball Name Ball # CRT_GREEN AC3 CRT_HSYNC AD4 AD7 AV7 AD8 AW9 AD9 AR3 AD10 AW7 AD11 AR8 AD12 AU3 CLKOUT_DP_P / CLKOUT_BCLK1_P AD13 AP2 CLKOUT_PCI0 AD14 AU1 CLKOUT_PCI1 AD15 AN3 CLKOUT_PCI2 AF9 DDPB_0N J8 AD16 AM2 CLKOUT_PCI3 AD9 DDPB_0P K10 AD17 AM11 CLKOUT_PCI4 AD12 DDPB_1N J11 AD18 AM4 CLKOUT_PCIE0N V2 DDPB_1P K11 AD19 AY8 CLKOUT_PCIE0P W1 DDPB_2N F6 AD20 AL10 CLKOUT_PCIE1N T10 DDPB_2P H6 AD21 AT5 CLKOUT_PCIE1P T9 DDPB_3N H4 AD22 AL2 CLKOUT_PCIE2N M6 DDPB_3P G4 AD23 AT2 CLKOUT_PCIE2P M7 DDPB_AUXN L2 AD24 AL4 CLKOUT_PCIE3N M9 DDPB_AUXP M1 AD25 AV10 CLKOUT_PCIE3P M10 DDPB_HPD J1 AD26 AL9 CLKOUT_PCIE4N P7 DDPC_0N F4 AD27 AN7 CLKOUT_PCIE4P P6 DDPC_0P E3 AD28 AK7 CLKOUT_PCIE5N Y8 DDPC_1N G3 AD29 AN6 CLKOUT_PCIE5P Y9 DDPC_1P F2 AD30 AH12 CLKOUT_PCIE6N U4 DDPC_2N C4 AD31 CRT_IRTN AB4 CRT_RED AC1 CRT_VSYNC AD3 DAC_IREF AE2 DcpRTC AY38 DcpSST AH33 AF6 DcpSus AF30 AD7 DcpSusByp AF27 AN11 CLKOUT_PCIE6P V4 DDPC_2P B4 C/BE0# AV3 CLKOUT_PCIE7N T7 DDPC_3N D2 C/BE1# AY6 CLKOUT_PCIE7P T6 DDPC_3P D3 C/BE2# AP5 CLKOUT_PEG_A_N Y6 DDPC_AUXN L10 C/BE3# AW10 CLKOUT_PEG_A_P Y7 DDPC_AUXP CLKIN_BCLK_N Y32 CLKOUT_PEG_B_N V7 DDPC_CTRLCLK AB10 CLKIN_BCLK_P Y31 CLKOUT_PEG_B_P V8 DDPC_CTRLDATA AB11 CLKIN_DMI_N H20 CLKIN_DMI_P G20 CLKOUTFLEX0 / GPIO64 AD10 CLKOUTFLEX1 / GPIO65 AK1 CLKIN_DOT_96N AM22 CLKIN_DOT_96P AL22 DDPC_HPD L9 J3 DDPD_0N B6 DDPD_0P C5 DDPD_1N D7 Datasheet Ballout Definition PCH Desktop Ball Name PCH Desktop Ball Name Ball # PCH Desktop Ball Name Ball # DDPD_1P D6 FDI_RXP1 G30 JTAG_TDO AN34 DDPD_2N G8 FDI_RXP2 D32 JTAG_TMS AL34 DDPD_2P F8 FDI_RXP3 G31 DDPD_3N G9 FDI_RXP4 J31 LAN_PHY_PWR_CT RL / GPIO12 AU34 DDPD_3P F9 FDI_RXP5 B31 LAN_RST# AY31 AL12 DDPD_AUXN L4 FDI_RXP6 B32 LDRQ0# DDPD_AUXP K4 FDI_RXP7 B34 LDRQ1# / GPIO23 AP14 AL7 MEPWROK AL33 DDPD_CTRLCLK DDPD_CTRLDATA AB7 AB9 FRAME# FWH0 / LAD0 AT12 NV_ALE J34 L35 DDPD_HPD H2 FWH1 / LAD1 AK16 NV_CLE DEVSEL# AT6 FWH2 / LAD2 AL16 OC0# / GPIO59 AM16 OC1# / GPIO40 AT30 AK28 DMI_IRCOMP D21 FWH3 / LAD3 AT31 DMI_ZCOMP C21 FWH4 / LFRAME# AR14 OC2# / GPIO41 DMI0RXN A19 GNT0# AK11 OC3# / GPIO42 AP30 DMI0RXP B18 GNT1# / GPIO51 AK6 OC4# / GPIO43 AP31 BA9 OC5# / GPIO9 AL28 AM3 OC6# / GPIO10 AL30 AM30 DMI0TXN DMI0TXP Datasheet Ball # J22 H22 GNT2# / GPIO53 GNT3# / GPIO55 DMI1RXN B20 GPIO0 AK41 OC7# / GPIO14 DMI1RXP C19 GPIO8 AK30 PAR PCIECLKRQ0# / GPIO73 AN35 PCIECLKRQ1# / GPIO18 AM39 PCIECLKRQ2# / GPIO20 AP38 PCIECLKRQ3# / GPIO25 AP33 PCIECLKRQ4# / GPIO26 AW37 PCIECLKRQ5# / GPIO44 AW38 PCIECLKRQ6# / GPIO45 AV36 AP6 DMI1TXN G22 GPIO13 AR16 DMI1TXP F22 GPIO15 AY36 DMI2RXN E20 GPIO24 AR34 DMI2RXP D20 GPIO27 AP37 DMI2TXN H24 GPIO28 AV40 DMI2TXP G24 GPIO31 AP40 DMI3RXN G18 GPIO32 AJ40 DMI3RXP H18 GPIO33 AT16 DMI3TXN L24 GPIO35 AR41 DMI3TXP K24 GPIO57 AL32 DRAMPWROK AW32 GPIO72 AY34 FDI_FSYNC0 E34 HDA_BCLK AW14 FDI_FSYNC1 E36 HDA_RST# AV14 FDI_INT B36 HDA_SDIN0 AV13 PCIECLKRQ7# / GPIO46 AP36 FDI_LSYNC0 C35 HDA_SDIN1 AP18 PCIRST# AH10 FDI_LSYNC1 D35 HDA_SDIN2 AU13 PECI D36 PEG_A_CLKRQ# / GPIO47 AV39 PEG_B_CLKRQ# / GPIO56 AW35 FDI_RXN0 K30 HDA_SDIN3 AN16 FDI_RXN1 H30 HDA_SDO AP16 FDI_RXN2 D31 HDA_SYNC AU15 FDI_RXN3 F31 INIT3_3V# AR39 FDI_RXN4 K31 INTRUDER# AN24 FDI_RXN5 C30 INTVRMEN AW31 FDI_RXN6 A33 IRDY# FDI_RXN7 C33 JTAG_TCK AK33 FDI_RXP0 J30 JTAG_TDI AL36 AP7 PERn1 D15 PERn2 B17 PERn3 B15 PERn4 D14 PERn5 C12 287 Ballout Definition PCH Desktop Ball Name PCH Desktop Ball Name Ball # PCH Desktop Ball Name Ball # PERn6 D8 PWM1 AR12 RI# PERn7 A12 PWM2 AW12 RSMRST# AL24 PERn8 C7 PWM3 AY13 RTCRST# AK24 PERp1 C16 PWRBTN# AK36 RTCX1 AW30 PERp2 A16 PWROK AM24 RTCX2 BA30 PERp3 C14 RCIN# AM40 SATA0GP / GPIO21 AJ37 PERp4 D13 REFCLK14IN AF7 SATA0RXN W41 PERp5 B13 REQ0# AP4 SATA0RXP V40 PERp6 C9 REQ1# / GPIO50 AW5 SATA0TXN U38 PERp7 B11 REQ2# / GPIO52 AY4 SATA0TXP PERp8 B8 REQ3# / GPIO54 AH8 SATA1GP / GPIO19 PERR# AT4 Reserved AF15 SATA1RXN Y38 PETn1 D18 Reserved V11 SATA1RXP Y37 PETn2 H16 Reserved Y12 SATA1TXN AB36 PETn3 H14 Reserved V10 SATA1TXP AB35 PETn4 K14 Reserved Y11 SATA2GP / GPIO36 AK39 PETn5 H12 Reserved H36 SATA2RXN AD36 PETn6 G11 Reserved H35 SATA2RXP AD35 PETn7 D11 Reserved P32 SATA2TXN AB31 PETn8 K12 Reserved E41 SATA2TXP AB32 PETp1 D17 Reserved T33 SATA3GP / GPIO37 AR38 PETp2 G16 Reserved P35 SATA3RXN AC41 PETp3 G14 Reserved H33 SATA3RXP AC39 PETp4 L14 Reserved F37 SATA3TXN AB37 PETp5 G12 Reserved E39 SATA3TXP AB38 PETp6 H11 Reserved G33 PETp7 D10 Reserved D40 SATA4GP / GPIO16 / CLK_CFG_SEL1 AH39 PETp8 J12 Reserved F33 SATA4RXN AF41 PIRQA# AT8 Reserved T31 SATA4RXP AT33 AE40 AD38 V38 AH38 PIRQB# AR4 Reserved P33 SATA4TXN PIRQC# AT11 Reserved M35 SATA4TXP AE38 SATA5GP / GPIO49 / TEMP_ALERT# AG40 SATA5RXN AF35 SATA5RXP AF34 PIRQD# BA5 Reserved L33 PIRQE# / GPIO2 AU8 Reserved M36 PIRQF# / GPIO3 AH7 Reserved M34 PIRQG# / GPIO4 AP12 Reserved M30 PIRQH# / GPIO5 AW4 Reserved F36 PLOCK# AK12 Reserved P36 PLTRST# AV34 Reserved F40 PME# AH11 Reserved M32 PMSYNCH C37 Reserved L36 PROC_MISSING/ GPIO30 AT37 Reserved M31 Reserved F38 PROCPWRGD B38 Reserved J36 BA12 Reserved J35 PWM0 288 Ball # SATA5TXN AD33 SATA5TXP AD32 SATAICOMPI T39 SATAICOMPO T41 SATALED# AN39 SCLOCK / GPIO22 AN41 SDATAOUT0 / GPIO39 AL39 SDATAOUT1 / GPIO48 AG38 Datasheet Ballout Definition PCH Desktop Ball Name PCH Desktop Ball Name Ball # PCH Desktop Ball Name Ball # SDVO_CTRLCLK AB13 SYS_PWROK AT38 USBP6P AL20 SDVO_CTRLDATA AB12 SYS_RESET# AL38 USBP7N AV20 AW11 USBP7P AW19 BA19 SDVO_INTN N4 TACH0 / GPIO17 SDVO_INTP M3 TACH1 / GPIO1 AL14 USBP8N SDVO_STALLN P3 TACH2 / GPIO6 AV11 USBP8P AY18 SDVO_STALLP N2 TACH3 / GPIO7 AY11 USBP9N AM20 SDVO_TVCLKINN L7 THRMTRIP# C38 USBP9P AN20 AV17 SDVO_TVCLKINP Datasheet Ball # L6 TP1 L18 USBP10N SERIRQ AL40 TP2 K18 USBP10P AV18 SERR# AV6 TP3 J20 USBP11N AR20 SLOAD / GPIO38 AM38 TP4 P12 USBP11P AT20 SLP_LAN# / GPIO29 BA35 TP5 P13 USBP12N AK18 TP6 T13 USBP12P AL18 SLP_M# AT36 TP7 T12 USBP13N AY17 SLP_S3# AV35 TP8 V34 USBP13P BA16 SLP_S4# AP35 TP9 AT24 USBRBIAS AV15 SLP_S5# / GPIO63 AU36 TP10 AR24 USBRBIAS# AY15 SMBALERT# / GPIO11 AL31 TP11 V20 V_CPU_IO B39 SMBCLK AV32 TP12 P10 V_CPU_IO_NCTF A39 SMBDATA AM31 SML0ALERT# / GPIO60 / CLK_CFG_SEL3 BA33 SML0CLK SML0DATA TP13 P9 TP18 AK35 V5REF_Sus TP19 AN36 Vcc3_3 AV2 TP20 AU39 Vcc3_3 AY3 AW33 TP21 AH30 Vcc3_3 AK14 AT34 TP22_NCTF AY1 Vcc3_3 AJ14 TP22_NCTF A3 Vcc3_3 AJ16 TP22_NCTF BA41 Vcc3_3 AE27 SML1ALERT# / GPIO74 / CLK_CFG_SEL2 AY32 SML1CLK / GPIO58 AV31 SML1DATA / GPIO75 AR31 SPI_CLK V31 SPI_CS0# V32 SPI_CS1# T32 SPI_MISO V30 SPI_MOSI T34 SPKR AJ38 SRTCRST# AP28 SST AN31 STOP# AN8 STP_PCI# / GPIO34 AT40 SUS_STAT# / GPIO61 AK31 SUSCLK / GPIO62 AH31 TP22_NCTF V5REF AN1 AW16 A41 Vcc3_3 AD27 AH35 Vcc3_3 U40 TRDY# AL6 Vcc3_3 A9 TRST# AL35 Vcc3_3 AH16 USBP0N AW25 Vcc3_3 AH18 USBP0P AY25 Vcc3_3_NCTF AW1 USBP1N BA23 Vcc3_3_NCTF BA3 USBP1P AY24 VccAClk AA1 USBP2N AW23 VccADAC AF1 USBP2P AY22 VccADPLLA R2 USBP3N AR22 VccADPLLB T1 USBP3P AP22 VccAPLLEXP A21 USBP4N AV21 VccCore AE18 USBP4P AV22 VccCore AD18 USBP5N AY20 VccCore AF19 USBP5P AW21 VccCore AE19 USBP6N AK20 VccCore AF20 TP23 289 Ballout Definition PCH Desktop Ball Name 290 Ball # PCH Desktop Ball Name VccCore AE20 VccCore VccCore AD20 VccCore U20 VccCore Ball # PCH Desktop Ball Name Ball # G28 VccIO N18 VccCore F28 VccIO M18 VccCore D28 VccIO N20 T20 VccCore C28 VccIO M20 VccCore AF22 VccCore A28 VccIO M22 VccCore AE22 VccCore P29 VccIO M24 VccCore U22 VccCore E29 VccIO D24 VccCore T22 VccCore D29 VccIO C24 VccCore AF23 VccCore B29 VccIO B24 VccCore AE23 VccDMI A23 VccIO D25 VccCore AD23 VccFDIPLL A37 VccIO C25 VccCore AA23 VccIO AH20 VccIO B25 VccCore Y23 VccIO AJ22 VccIO M26 VccCore V23 VccIO AH22 VccIO L26 VccCore U23 VccIO AH23 VccIO K26 VccCore T23 VccIO U15 VccIO J26 VccCore AF24 VccIO T15 VccIO H26 VccCore AE24 VccIO AA27 VccIO G26 VccCore AB24 VccIO Y29 VccIO F26 VccCore AA24 VccIO V29 VccIO P18 VccCore Y24 VccIO T29 VccIO T19 VccCore V24 VccIO T30 VccIO P19 VccCore T24 VccIO Y36 VccLAN Y20 VccCore AE26 VccIO V36 VccLAN Y22 VccCore AD26 VccIO T36 VccME AH1 VccCore AB26 VccIO T37 VccME AJ2 VccCore V26 VccIO R37 VccME AH3 VccCore U26 VccIO R38 VccME AJ4 VccCore T26 VccIO P38 VccME AH4 VccCore P26 VccIO P39 VccME AJ5 VccCore E26 VccIO R40 VccME AG5 VccCore C26 VccIO P24 VccME AH6 VccCore A26 VccIO U19 VccME AF8 VccCore T27 VccIO AA26 VccME AF10 VccCore P27 VccIO V15 VccME AH13 VccCore E27 VccIO Y26 VccME AF13 VccCore D27 VccIO AT28 VccME AD13 VccCore B27 VccIO N22 VccME AE15 VccCore N28 VccIO N24 VccME AD15 VccCore M28 VccIO N26 VccME AB16 VccCore L28 VccIO P15 VccME AD16 VccCore K28 VccIO P16 VccME AF16 VccCore J28 VccIO N16 VccME AE16 VccCore H28 VccIO M16 VccME AB15 Datasheet Ballout Definition PCH Desktop Ball Name PCH Desktop Ball Name Ball # PCH Desktop Ball Name Ball # VccME AA15 Vss AR1 Vss A7 VccME Y15 Vss P1 Vss AL8 VccME AA16 Vss G1 Vss AK8 VccME Y16 Vss AD2 Vss AD8 VccME AA18 Vss U2 Vss AB8 VccME Y18 Vss K2 Vss T8 VccME Y19 Vss AW3 Vss P8 VccME3_3 N38 Vss AK3 Vss M8 VccME3_3 N40 Vss AE3 Vss L8 VccPNAND P30 Vss W3 Vss E8 VccPNAND M39 Vss V3 Vss AU9 VccPNAND M41 Vss U3 Vss AK9 VccRTC AY29 Vss T3 Vss AH9 VccRTC_NCTF BA39 Vss L3 Vss V9 P41 Vss K3 Vss H9 VccSus3_3 AV25 Vss AE4 Vss E9 VccSus3_3 BA26 Vss AA4 Vss AM10 VccSus3_3 AW26 Vss R4 Vss AK10 VccSus3_3 AU26 Vss P4 Vss Y10 VccSus3_3 AT26 Vss E4 Vss C10 VccSus3_3 AR26 Vss AV5 Vss AR11 VccSus3_3 AP26 Vss AU5 Vss AF11 VccSus3_3 AN26 Vss AN5 Vss AD11 VccSus3_3 AM26 Vss AK5 Vss T11 VccSus3_3 AL26 Vss AF5 Vss P11 VccSus3_3 AK26 Vss AC5 Vss M11 VccSus3_3 AY27 Vss AB5 Vss L11 VccSus3_3 AV27 Vss Y5 Vss F11 VccSus3_3 AU27 Vss W5 Vss C11 VccSus3_3 AW39 Vss T5 Vss AU12 VccSus3_3 AW40 Vss R5 Vss AN12 VccSus3_3 AV29 Vss N5 Vss AM12 VccSus3_3_NCTF BA40 Vss M5 Vss AF12 VccSus3_3_NCTF AY40 Vss J5 Vss V12 VccSusHDA AJ18 Vss H5 Vss M12 VccVRM C2 Vss F5 Vss L12 VccVRM L39 Vss E5 Vss F12 VccVRM L40 Vss AD6 Vss E12 VccVRM C3 Vss V6 Vss Y13 Vss AV28 Vss J6 Vss V13 Vss U39 Vss E6 Vss E13 Vss B10 Vss BA7 Vss BA14 Vss AF3 Vss J7 Vss AT14 Vss AH29 Vss H7 Vss AN14 VccSATAPLL Datasheet Ball # 291 Ballout Definition PCH Desktop Ball Name Vss 292 Ball # PCH Desktop Ball Name AM14 Vss Vss N14 Vss M14 Vss Vss Ball # PCH Desktop Ball Name Ball # P20 Vss AF29 Vss L20 Vss AD29 Vss K20 Vss AB29 J14 Vss F20 Vss AU30 F14 Vss BA21 Vss AR30 Vss A14 Vss AU22 Vss AN30 Vss AH15 Vss AT22 Vss AD30 Vss E15 Vss AN22 Vss AB30 Vss AU16 Vss AK22 Vss Y30 Vss V16 Vss AD22 Vss L30 Vss U16 Vss AB22 Vss F30 Vss T16 Vss AA22 Vss E30 Vss L16 Vss V22 Vss A30 Vss K16 Vss L22 Vss AF31 Vss J16 Vss K22 Vss AD31 Vss F16 Vss E22 Vss P31 Vss E16 Vss D22 Vss L31 Vss AW17 Vss AU23 Vss H31 Vss C17 Vss AB23 Vss C31 Vss AW18 Vss E23 Vss AM32 Vss AT18 Vss AW24 Vss AK32 Vss AR18 Vss AV24 Vss AH32 Vss AN18 Vss AP24 Vss AF32 Vss AM18 Vss AJ24 Vss L32 Vss AF18 Vss AH24 Vss K32 Vss AB18 Vss AD24 Vss C32 Vss V18 Vss U24 Vss AU33 Vss U18 Vss J24 Vss AF33 Vss T18 Vss F24 Vss AB33 Vss J18 Vss AJ26 Vss Y33 Vss F18 Vss AH26 Vss V33 Vss C18 Vss AF26 Vss M33 Vss AU19 Vss AH27 Vss E33 Vss AH19 Vss AB27 Vss AK34 Vss AD19 Vss Y27 Vss AH34 Vss AB19 Vss V27 Vss AD34 Vss AA19 Vss U27 Vss AB34 Vss V19 Vss BA28 Vss P34 Vss E19 Vss AW28 Vss L34 Vss AU20 Vss AR28 Vss G34 Vss AP20 Vss AN28 Vss F34 Vss AJ20 Vss AM28 Vss D34 Vss AB20 Vss AJ28 Vss V35 Vss AA20 Vss AU29 Vss T35 Datasheet Ballout Definition PCH Desktop Ball Name Datasheet Ball # PCH Desktop Ball Name Ball # Vss A35 Vss_NCTF BA2 Vss AH36 Vss_NCTF AY2 Vss AF36 Vss_NCTF B2 Vss BA37 Vss_NCTF A5 Vss AU37 Vss_NCTF B40 Vss AN37 Vss_NCTF A40 Vss AK37 Vss_NCTF AY41 Vss AF37 Vss_NCTF AW41 Vss AC37 Vss_NCTF C41 Vss W37 Vss_NCTF Vss N37 WAKE# Vss M37 XCLK_RCOMP Vss J37 XTAL25_IN Y4 Vss E37 XTAL25_OUT Y2 Vss D37 Vss AU38 Vss AA38 Vss G38 Vss AF39 Vss AE39 Vss AD39 Vss AA39 Vss W39 Vss V39 Vss K39 Vss J39 Vss G39 Vss D39 Vss C39 Vss AD40 Vss AB40 Vss Y40 Vss K40 Vss AU41 Vss AH41 Vss AA41 Vss G41 Vss P23 Vss B22 Vss P22 Vss C23 Vss_NCTF BA1 Vss_NCTF E1 Vss_NCTF C1 B41 AR33 AA3 293 Ballout Definition 6.2 PCH Ballout Mobile Ballout This section contains the PCH ballout. Figure 6-3 and Figure 6-4 show the ballout from a top of the package quadrant view. Table 6-2 is the BGA ball list, sorted alphabetically by signal name. 294 Datasheet Ballout Definition Figure 6-3. 53 52 BJ Vss_NC Vss_NC TF TF BH Vss_NC Vss_NC TF TF 51 BE BD Vss_NC TF Vss_NC TF VccADP LLB XTAL25 _OUT CRT_RE D E D A PETp1 PERn1 BJ VccIO VccIO BG VccIO BE PETn1 BF Vss PETp4 Vss PETp6 PETn4 PETp2 VccIO BD PETn6 Vss PETn2 VccIO BC Vss PERp4 Vss VccIO BB PERn6 PERn4 PERp2 VccIO BA PERp6 Vss PERn2 VccIO AW Vss TP7 TP6 VccTX_ VccTX_L LVDS VDS AY DDPB_3 N DDPC_ HPD Vss LVD_VR LVD_VR EFH EFL Vss Vss DDPB_ HPD DDPD_ HPD Vss PETp7 Vss PETp3 Vss VccIO AV PETn7 PERp7 PETn3 PERn3 VccIO AU Vss PERn7 Vss PERp3 VccIO AT AR LVD_VB G LVD_IB G Vcc3_3 Vss Vss VccIO VccIO VccIO AN CLKOU T_PCIE 4N Vss CLKOU T_PCIE 2P CLKOU T_PCIE 2N Vss CLKOUT _PCIE1P CLKOUT _PCIE1N Vss Vss Vss Vss Vss Vss Vss Vss Vss Vss AM CLKOU T_PEG_ B_P Vss CLKOU T_PCIE 0N CLKOU T_PCIE 0P Vss Vss Vss TP13 TP12 Vss Vss Vss Vss Vss Vss Vss Vss AK VccIO Vss Vss VccCore VccCore Vss AJ XTAL25 _IN Vss Vss Vss Vss CLKOU T_PCIE 3N CLKOU T_PCIE 3P VssA_L VDS VccALV DS VccIO VccIO Vss VccCore VccCore VccCor e AH VssA_D AC Vss CLKOU T_PCIE 7N CLKOU T_PCIE 7P VccME VccME VccME Vss XCLK_R COMP Vss VccIO VccIO VccCore VccCore VccCor e AP Vss AL CLKOU T_PCIE 5N CLKOU CLKOUT T_PCIE _PCIE6N 6P AG Vss Vss AF VccADA C AE DAC_IR EF Vss Vss CLKOUT _PEG_A_ P CLKOUT _PEG_A_ N Vss VccME VccME VccME Vcc3_3 Vss Vss Vss Vss VccCor e DDPC_ L_DDC_ CTRLDA CLK TA Vss L_CTRL _CLK NC_1 Vss NC_3 NC_4 Vss NC_2 Vcc3_3 Vcc3_3 Vss Vss Vss VccCor e AB VccME VccME Vss Vss Vss Vss AA VccME VccME Vss Vss Vss Vss Vss AD AC CRT_IR TN CRT_HS YNC Vss DDPC_ L_BKLT CTRLCL CTL K CRT_VS YNC Vss Vss L_DDC_ DATA Vss VccME VccME VccME Vss Y Vss CRT_D DC_DAT A W CRT_D DC_CLK DDPD_ CTRLDA TA SDVO_ CTRLDA TA Vss L_CTRL _DATA Vss Vss Vss Vss VccME VccME VccME Vss Vss DDPD_ CTRLCL K SDVO_ CTRLCL K Vcc3_3 Vss L_BKLT L_VDD_ EN EN Vss CLKOUT FLEX0 / GPIO64 Vss CLKOU TFLEX2 / GPIO66 Vss Vss Vss Vss Vss Vss Vss Vss VccSus 3_3 V Vss VccSus 3_3 U NC_5 T Vss CLKOU T_PCI1 R CLKOU T_PCI3 Vss CLKOU T_PCI4 Vss CLKOU T_PCI2 CLKOUT FLEX1 / GPIO65 Vss Vss REFCLK 14IN AD22 Vss AD24 AD23 GNT3# / GPIO55 V5REF AD12 AD30 Vss AD13 AD16 AD18 Vss Vss AD14 Vss REQ0# Vss PERR# Vss AD9 Datasheet P TP17 VccSus 3_3 N AD15 Vss Vcc3_3 Vss TP14 TP16 Vss Vcc3_3 Vss AD25 Vss VccSusHD A VccSus 3_3 VccSus 3_3 M L Vss K AD27 Vcc3_3 AD17 AD5 GPIO7 HDA_DOC K_RST# / GPIO13 VccSus 3_3 H G J Vss AD0 Vss AD31 Vss Vss Vss C/BE1# Vss PIRQA# Vss C/BE3# Vss HDA_SDI N0 VccSus 3_3 DEVSEL # AD29 AD26 AD19 GPIO17 GNT2# / GPIO53 LDRQ1# / GPIO23 HDA_SDI N3 HDA_SDI N1 VccSus 3_3 F AD8 Vss HDA_SDI N2 Vss VccSus 3_3 E AD4 FWH4 / LFRAM E# FWH2 / LAD2 HDA_RST # Vss TRDY# FRAME # SERR# Vss AD7 47 TP15 VccSus 3_3 PAR Vss Vss_NC Vss_NC PIRQH# TF TF / GPIO5 50 49 48 AD1 Vss AD28 REQ1# / GPIO50 46 AD2 45 AD10 Vss STOP# REQ2# / GPIO52 Vss 51 Vcc3_3 Vss VccSus 3_3 C/BE2# GNT0# Vss HDA_DOC K_EN# / GPIO33 PLOCK# Vss Vss_NC Vss_NC TF TF Vss_NC Vss_NC TF TF 53 52 GNT1# / GPIO51 CLKIN_ PCILOO PBACK Vss Vss_NC TF Vss_NC TF AD21 C/BE0# PIRQB# Vcc3_3 Vss Vss PIRQF# / GPIO3 Vss CLKOU TFLEX3 / GPIO67 CLKOU T_PCI0 REQ3# / GPIO54 BH Vss C B 27 VccTX_L VDS CRT_BL UE G F PETn5 28 VccIO VccTX_L VDS Vss CRT_G REEN J H 29 Vss L K Vss DDPC_3 N DDPC_3 P Vss Vss PERn5 Vss DDPB_3 P 30 PERp1 Vss VccADA C N M DDPB_2 N DDPB_2 P 31 Vss VssA_D AC R P LVDSB_ LVDSB_ DATA#1 DATA1 PERp5 PERn8 DDPD_3 N DDPD_3 P DDPC_2 N DDPC_2 P 32 PETp5 LVDSB_ LVDSB_ CLK# CLK CLKOU T_PCIE 5P U T Vss Vss PETn8 Vss 33 Vss CLKOU T_PEG_ B_N W V LVDSA_ LVDSA_ DATA3 DATA#3 34 PERp8 Vss Vss AA Y Vss VccAClk CLKOU T_PCIE 4P AC AB TP4 35 DDPD_ 2N LVDSB_ DATA2 LVDSB_ DATA3 VccAClk AE AD DDPD_1 P Vss Vss 36 PETp8 Vss AG AF DDPB_0 N DDPB_0 P 37 DDPD_ 2P Vss DDPC_0 N DDPC_0 P Vss Vss TP5 38 DDPD_1 N DDPD_0 P Vss Vss 39 DDPC_1 N Vss LVDSA_ LVDSA_ DATA0 DATA#0 LVDSA_ LVDSA_ DATA2 DATA#2 LVDSA_ CLK LVDSB_ DATA#3 AJ AH DDPB_1 P DDPC_ AUXN DDPC_ AUXP DDPD_ AUXP DDPD_ AUXN Vss 40 DDPD_0 N DDPC_1 P Vss DDPB_ AUXN Vss 41 Vss LVDSB_ DATA#2 AL AK 42 DDPB_1 N LVDSA_ DATA1 LVDSB_ DATA0 LVDSA_ CLK# AN AM Vss 43 Vss AR AP VccADP LLA 44 DDPB_ AUXP SDVO_IN TN Vss Vss 45 SDVO_IN TP Vss VccADP LLB LVDSB_ DATA#0 46 SDVO_T VCLKIN N SDVO_T VCLKIN P SDVO_ STALLP Vss LVDSA_ DATA#1 AU AT Vss VccADP LLA AW AV 47 Vss BA AY 48 Vss Vss BC BB PCH ballout (top View--Leff side) (Mobile Only) 49 Vss_NC Vss_NC SDVO_ TF TF STALLN BG BF 50 AD20 PIRQD # 44 AD11 PIRQE# / GPIO2 Vss IRDY# 43 42 GPIO1 PIRQC # Vss AD6 41 FWH0 / LAD0 GPIO6 40 AD3 39 38 37 FWH1 / LAD1 Vss PIRQG# / GPIO4 36 LDRQ0# 35 HDA_S YNC 34 33 HDA_S DO Vss FWH3 / LAD3 32 31 D VccSus 3_3 HDA_BCL K 30 29 C VccSu s3_3 VccSus 3_3 28 295 B A 27 Ballout Definition Figure 6-4. 26 BJ VccIO 24 VccAPL LEXP DMI_ZC OMP BH BG 25 23 22 DMI1RX N Vss VccIO BE VccIO BD VccIO BC VccIO 21 DMI1RX P Vss 20 DMI3RX N DMI1TXP DMI_IR COMP BF PCH ballout (top View--right side) (Mobile Only) 19 18 VccFDIPL L Vss DMI3RX P DMI0TX N DMI0TX P DMI0R XP DMI0R XN 15 14 DMI3TXN DMI2TX N DMI2TX P FDI_LSY NC1 BB VccIO Vss TP3 Vss BA VccIO CLKIN_ DMI_P TP1 DMI2RX P FDI_RXP 0 FDI_RXN 0 11 10 PMSYNC H Vss Vss FDI_RXN 5 FDI_RXP 5 Vss Vss AV VccIO AU VccIO AT VccIO CLKIN_ DMI_N Vss VccVR M Vss DMI2RX N Vss Vss Vss VccVRM VccVRM TP2 VccVR M FDI_RXP 4 Vss Vss Vss V_CPU_I O 5 4 Vss_NCT Vss_NCTF F Reserved Vss Vss Reserved Reserved Reserved Vss NV_ALE Reserved Vss Vss NV_CLE Reserved Vss Reserved Reserved Vss Reserved Reserved Vss Vss Vss Vss Reserved Vss Vss Reserved AP Reserved VccIO VccIO VccIO VccIO VccIO Vss AM Vss Vss VccIO Vss Vss Vss Vss Vss VccME3_ 3 VccME3_ 3 Vss Reserved Reserved CLKOUT_ DMI_N VccPNAN VccPNAN D D VccPNAN VccPNAN D D VccME3_ VccME3_3 3 Vss Vss Vss Vss VccPNA VccPNA ND ND Vss Vss VccIO AJ Vss TP11 Vss Vss AH VccCor e Vss VccIO VccIO VccIO VccIO Vss VccIO VccIO VccIO VccPNAN VccPNAN D D VccPNAN D Vss SATA0TX N SATA0TX P Vss SATA0RXN SATA0RX P VccSATAPL L Vss Vss Vss CLKIN_SA CLKIN_S TA_N / ATA_P / CKSSCD_ CKSSCD N _P Vss SATA1TX SATA1TXP N Vss Vss SATA3RXN VccLAN VccLAN SATAICO SATAICO MPO MPI TP8 Vss SATA2RX N SATA2RX P Vss SATA2TXN SATA2TX P SATA3TXN Vss AE Vss VccCor e Vss VccCor e VccCor e Vss VccIO VccIO VccIO Vss Vss Vcc3_3 Vss SATA4RX SATA4RXP N Vss Vss SATA4TX SATA4TX N P Vss VccIO VccIO VccIO Vss Vss TP19 Vss Vss Vss Y VccIO VccIO Vss DcpSus DcpSus Byp Vss Vss SATA3GP GPIO27 / GPIO37 Vss Vss SERIRQ Vss SATA2GP / GPIO36 SDATAOU T1 / GPIO48 AK SATA3RXP AH AL AJ AG SATA3TXP SATA5RXN Vss SATA5GP / GPIO49 / TEMP_AL ERT# Vcc3_3 Vss Vss Vss SATA0GP / GPIO21 Vss Vss SCLOCK / GPIO22 Vss BMBUSY# / GPIO0 Vss SLOAD / GPIO38 V VccIO VccSus 3_3 VccIO VccIO Vss Vss VccSus VccSus3 VccSus3 3_3 _3 _3 Vss Vcc3_3 Vcc3_3 GPIO28 DcpSST Vss DcpRTC Vss Vss GPIO35 PCIECLKR Q1# / GPIO18 VccSus VccSus3 3_3 _3 CLKRUN# / GPIO32 OC7# / GPIO14 T CL_CLK1 Vss CL_DATA 1 CL_RST1 # Vss GPIO15 SYS_RES ET# Vss SATALED# VccSus 3_3 Vss USBP2 P Vss VccSus3_ 3 Vss PCIECLK ACPRESE SUS_STAT PWRBTN RQ0# / NT / INIT3_3V# # / GPIO61 # GPIO73 GPIO31 Vss RCIN# N VccSus 3_3 Vss USBP6P USBP2 N TP10 OC0# / GPIO59 M VccSus 3_3 USBP1 2P USBP6N Vss TP9 Vss SML1ALE RT# / GPIO74 L VccSus 3_3 USBP1 2N Vss USBP3 P Vss OC3# / GPIO42 Vss Vss STP_PCI #/ GPIO34 PCIECLK RQ4# / GPIO26 LAN_PH Y_PWR_ CTRL / GPIO12 Vss VccSus 3_3 Vss H VccSus 3_3 USBP1 1P G VccSus 3_3 USBP1 1N F VccSus 3_3 V5REF _Sus E VccSus 3_3 Vss USBP1 3P USBP10 P VccSus 3_3 VccSus 3_3 Vss USBP0N Vss Vss USBP4 P Vss OC5# / GPIO9 USBP9P USBP4 N CLKIN_D OT_96N OC2# / GPIO41 USBP9N Vss CLKIN_D OT_96P Vss USBP5 P USBP1P RSMRST # RTCRST # 26 Vss USBP1 3N 25 296 24 22 Vss USBP5 N 21 20 INTRUDE R# USBP1N 19 18 17 16 Vss Vss RI# OC6# / GPIO10 GPIO8 GPIO57 SLP_LAN #/GPIO29 OC4# / GPIO43 Vss SML1CL K/ GPIO58 Vss Vss Vss TP24 GPIO24 SMBDATA SML0CLK 14 Vss 12 LAN_RST # 11 10 Vss Vss SUSCLK / GPIO62 9 G F Vss_NCTF E Vss_NCT Vss_NCTF F D C Vss_NCT F Vss_NCTF 6 H PCIECLKR Q7# / GPIO46 B BATLOW# Vss_NCT Vss_NCTF / GPIO72 F 7 K J PEG_A_CL KRQ# / GPIO47 SLP_S5# / GPIO63 Vss PCIECLKR Q3# / GPIO25 8 JTAG_TDI Vss PLTRST# SMBALE RT# / GPIO11 Vss VccRTC 13 SLP_S4# M L JTAG_TD O PCIECLKR Q6# / GPIO45 SML0DAT A DRAMP WROK RTCX1 JTAG_TMS TRST# PCIECLK RQ5# / GPIO44 TP18 INTVRME N 15 SLP_M# P N SUS_PWR _DN_ACK / GPIO30 JTAG_TCK MEPWR PCIRST# OK SML1DA TA / GPIO75 Vss Vss WAKE# RTCX2 PWROK SYS_PWR OK SMBCLK SRTCRS T# USBP7N USBP10 N 23 OC1# / GPIO40 USBP0P USBP7P USBRBI AS# B SML0ALE RT# / GPIO60 USBP8N USBRBI AS D USBP3 N USBP8P PME# SPKR TP23 Vss K J Vss T R SDATAOUT 0 / GPIO39 PCIECLKR Q2# / GPIO20 V U Vss PEG_B_C LKRQ# / SLP_S3# GPIO56 Y W SATA1GP / GPIO19 A20GATE R AB AA Vss U AD AC SATA5TXP SATA4GP / GPIO16 Vss AF AE SATA5RXP SATA5TXN W A VccSATAPL L Vss AA C AM Vss AC P CLKOUT_B CLK0_P / CLKOUT_P CIE8P Vss VccCor e AP AN Vss SATA1RX SATA1RX N P AG AB CLKIN_BC LK_P Vss Vss AT AR CLKOUT _DMI_P CLKOUT_B CLK0_N / CLKOUT_P CIE8N Vss AV AU CLKOUT_D P_N / CLKOUT_B CLK1_N CLKIN_BCL K_N Vss AL AD SPI_MISO Reserved CLKOUT_D P_P / CLKOUT_B CLK1_P Vss AY AW Vss AN AF SPI_MOSI SPI_CS0# Vss BB BA Vss Vss BD BC Reserved SPI_CS1# AR AK BE SPI_CLK Vss VccDMI BF Vss_NCTF Reserved Reserved Reserved Reserved Reserved Vss_NCTF Vss Reserved BJ BH BG Vss Reserved Vss 2 1 Vss_NCT Vss_NCTF F Vss_NCT Vss_NCTF F Vss Reserved VccDMI V_CPU_I O 3 Vss Reserved PROCPW RGD THRMTRI P# Vss VccIO 6 Reserved Vss AY AW 7 Vss FDI_RXP 7 FDI_RXN 7 FDI_RXP 6 FDI_RXN 6 Vss FDI_RXN 4 8 Reserved PECI Vss Vss 9 Vss FDI_FSYN C0 FDI_RXN 2 FDI_RXP 2 Vss 12 FDI_LSY NC0 FDI_FSYN C1 Vss Vss DMI3TXP 13 FDI_INT FDI_RXP 1 Vss Vss 16 FDI_RXN 3 FDI_RXP 3 Vss DMI1TXN Vss 17 FDI_RXN 1 5 4 A 3 2 Datasheet 1 Ballout Definition Table 6-2. PCH Ballout by Signal name (Mobile Only) PCH Mobile Ball Name Datasheet Ball # A20GATE U2 ACPRESENT / GPIO31 P7 PCH Mobile Ball Name CLKIN_BCLK_N Ball # PCH Mobile Ball Name Ball # AP3 CLKOUT_PEG_B_N AK53 CLKIN_BCLK_P AP1 CLKOUT_PEG_B_P AK51 CLKIN_DMI_N AW24 BA24 CLKOUTFLEX0 / GPIO64 T45 CLKOUTFLEX1 / GPIO65 P43 AD0 H40 CLKIN_DMI_P AD1 N34 CLKIN_DOT_96N F18 AD2 C44 CLKIN_DOT_96P E18 AD3 A38 T42 C36 J42 CLKOUTFLEX2 / GPIO66 AD4 CLKIN_PCILOOPBA CK AD5 J34 CLKIN_SATA_N / CKSSCD_N AH13 CLKOUTFLEX3 / GPIO67 N50 CLKIN_SATA_P / CKSSCD_P AH12 CLKOUT_BCLK0_N / CLKOUT_PCIE8N AM3 AD6 A40 AD7 D45 AD8 E36 AD9 H48 AD10 E40 AD11 CLKRUN# / GPIO32 CRT_BLUE CRT_DDC_CLK CRT_DDC_DATA CRT_GREEN Y1 AA52 V51 V53 AB53 C40 CLKOUT_BCLK0_P / CLKOUT_PCIE8P AM1 AD12 M48 CLKOUT_DMI_N AN4 CRT_IRTN AB51 AD13 M45 CLKOUT_DMI_P AN2 CRT_RED AD53 AD14 F53 AT1 CRT_VSYNC AD15 M40 CLKOUT_DP_N / CLKOUT_BCLK1_N AD16 M43 CLKOUT_DP_P / CLKOUT_BCLK1_P AT3 CLKOUT_PCI0 N52 CLKOUT_PCI1 P53 CLKOUT_PCI2 P46 CLKOUT_PCI3 P51 CLKOUT_PCI4 P48 AD17 J36 AD18 K48 AD19 F40 AD20 C42 AD21 K46 AD22 M51 AD23 J52 AD24 K51 AD25 L34 AD26 F42 AD27 J40 AD28 G46 AD29 F44 AD30 M47 AD31 H36 BATLOW# / GPIO72 A6 C/BE0# J50 C/BE1# G42 C/BE2# H47 C/BE3# G34 CL_CLK1 T13 CL_DATA1 T11 CL_RST1# T9 CLKOUT_PCIE0N CRT_HSYNC DAC_IREF AK48 CLKOUT_PCIE0P AK47 CLKOUT_PCIE1N AM43 CLKOUT_PCIE1P AM45 CLKOUT_PCIE2N AM47 CLKOUT_PCIE2P AM48 CLKOUT_PCIE3N AH42 CLKOUT_PCIE3P AH41 CLKOUT_PCIE4N AM51 CLKOUT_PCIE4P AM53 CLKOUT_PCIE5N AJ50 CLKOUT_PCIE5P AJ52 CLKOUT_PCIE6N AH45 CLKOUT_PCIE6P AH46 CLKOUT_PCIE7N AF48 CLKOUT_PCIE7P AF47 CLKOUT_PEG_A_N AD43 CLKOUT_PEG_A_P AD45 Y53 Y51 AD48 DcpRTC V9 DcpSST V12 DcpSus Y22 DcpSusByp Y20 DDPB_0N BD42 DDPB_0P BC42 DDPB_1N BJ42 DDPB_1P BG42 DDPB_2N BB40 DDPB_2P BA40 DDPB_3N AW38 DDPB_3P BA38 DDPB_AUXN BG44 DDPB_AUXP BJ44 DDPB_HPD AU38 DDPC_0N BE40 DDPC_0P BD40 DDPC_1N BF41 DDPC_1P BH41 DDPC_2N BD38 DDPC_2P BC38 DDPC_3N BB36 DDPC_3P BA36 DDPC_AUXN BE44 297 Ballout Definition PCH Mobile Ball Name DDPC_AUXP DDPC_CTRLCLK PCH Mobile Ball Name BD44 FDI_RXN2 Ball # PCH Mobile Ball Name BD16 HDA_SDIN3 Ball # F32 Y49 FDI_RXN3 BJ16 HDA_SDO B29 DDPC_CTRLDATA AB49 FDI_RXN4 BA16 HDA_SYNC D29 DDPC_HPD AV40 FDI_RXN5 BE14 INIT3_3V# P6 DDPD_0N BJ40 FDI_RXN6 BA14 INTRUDER# A16 DDPD_0P BG40 FDI_RXN7 BC12 INTVRMEN A14 DDPD_1N BJ38 FDI_RXP0 BB18 IRDY# A42 DDPD_1P BG38 FDI_RXP1 BF17 JTAG_TCK M3 DDPD_2N BF37 FDI_RXP2 BC16 JTAG_TDI K1 DDPD_2P BH37 FDI_RXP3 BG16 JTAG_TDO J2 DDPD_3N BE36 FDI_RXP4 AW16 JTAG_TMS K3 DDPD_3P BD36 FDI_RXP5 BD14 L_BKLTCTL Y48 DDPD_AUXN BC46 FDI_RXP6 BB14 L_BKLTEN T48 DDPD_AUXP BD46 FDI_RXP7 BD12 L_CTRL_CLK AB46 DDPD_CTRLCLK U50 FRAME# C46 L_CTRL_DATA DDPD_CTRLDATA U52 FWH0 / LAD0 D33 L_DDC_CLK DDPD_HPD AT38 FWH1 / LAD1 B33 L_DDC_DATA Y45 DEVSEL# V48 AB48 F46 FWH2 / LAD2 C32 L_VDD_EN T47 DMI_IRCOMP BF25 FWH3 / LAD3 A32 DMI_ZCOMP BH25 FWH4 / LFRAME# C34 LAN_PHY_PWR_CT RL / GPIO12 K9 DMI0RXN BC24 GNT0# F48 LAN_RST# A10 K45 LDRQ0# A34 F36 LDRQ1# / GPIO23 H53 LVD_IBG AP39 Y3 LVD_VBG AP41 C38 LVD_VREFH AT43 D37 LVD_VREFL AT42 AV53 DMI0RXP DMI0TXN BD24 BE22 GNT1# / GPIO51 GNT2# / GPIO53 DMI0TXP BD22 GNT3# / GPIO55 DMI1RXN BJ22 GPIO0 DMI1RXP DMI1TXN BG22 BF21 GPIO1 GPIO6 F34 DMI1TXP BH21 GPIO7 J32 LVDSA_CLK# DMI2RXN AW20 GPIO8 F10 LVDSA_CLK AV51 BB47 DMI2RXP BA20 GPIO15 T7 LVDSA_DATA#0 DMI2TXN BD20 GPIO17 F38 LVDSA_DATA#1 BA52 AY48 DMI2TXP BC20 GPIO24 H10 LVDSA_DATA#2 DMI3RXN BJ20 GPIO27 AB12 LVDSA_DATA#3 AV47 BB48 DMI3RXP BG20 GPIO28 V13 LVDSA_DATA0 DMI3TXN BE18 GPIO35 V6 LVDSA_DATA1 BA50 F8 LVDSA_DATA2 AY49 A30 LVDSA_DATA3 AV48 LVDSB_CLK# AP48 LVDSB_CLK AP47 LVDSB_DATA#0 AY53 DMI3TXP DRAMPWROK FDI_FSYNC0 FDI_FSYNC1 BD18 D9 BF13 BH13 FDI_INT BJ14 FDI_LSYNC0 BJ12 FDI_LSYNC1 BG14 FDI_RXN0 BA18 FDI_RXN1 298 Ball # BH17 GPIO57 HDA_BCLK HDA_DOCK_EN# / GPIO33 H32 HDA_DOCK_RST# / GPIO13 J30 LVDSB_DATA#1 AT49 HDA_RST# C30 LVDSB_DATA#2 AU52 HDA_SDIN0 G30 LVDSB_DATA#3 AT53 HDA_SDIN1 F30 LVDSB_DATA0 AY51 HDA_SDIN2 E32 Datasheet Ballout Definition PCH Mobile Ball Name PCH Mobile Ball Name Ball # PCH Mobile Ball Name Ball # LVDSB_DATA1 AT48 PERn5 BF33 RCIN# LVDSB_DATA2 AU50 PERn6 BA34 REFCLK14IN P41 LVDSB_DATA3 AT51 PERn7 AT34 REQ0# F51 MEPWROK T1 K5 PERn8 BG34 REQ1# / GPIO50 A46 NC_1 AB45 PERp1 BJ30 REQ2# / GPIO52 B45 NC_2 AB38 PERp2 BA30 REQ3# / GPIO54 M53 NC_3 AB42 PERp3 AT30 Reserved AY9 NC_4 AB41 PERp4 BB32 Reserved BD1 NC_5 T39 PERp5 BH33 Reserved AP15 NV_ALE BD3 PERp6 AW34 Reserved BD8 NV_CLE AY6 PERp7 AU34 Reserved AV9 OC0# / GPIO59 N16 PERp8 BJ34 Reserved BG8 OC1# / GPIO40 J16 PERR# E50 Reserved AP7 OC2# / GPIO41 F16 PETn1 BF29 Reserved AP6 OC3# / GPIO42 L16 PETn2 BC30 Reserved BD6 OC4# / GPIO43 E14 PETn3 AU32 Reserved BB7 OC5# / GPIO9 G16 PETn4 BD32 Reserved BC8 OC6# / GPIO10 F12 PETn5 BG32 Reserved BJ8 OC7# / GPIO14 T15 PETn6 BC34 Reserved BJ6 PAR H44 PETn7 AU36 Reserved BG6 PETn8 BG36 Reserved AT6 PETp1 BH29 Reserved AT9 PETp2 BD30 Reserved BB1 PETp3 AV32 Reserved AV6 PETp4 BE32 Reserved BB3 PETp5 BJ32 Reserved BA4 PETp6 BD34 Reserved BE4 PETp7 AV36 Reserved BB6 PETp8 BJ36 Reserved AV7 PIRQA# G38 Reserved AU2 PIRQB# H51 Reserved AY8 PIRQC# B37 Reserved AY5 PIRQD# A44 Reserved AV11 PCIECLKRQ0# / GPIO73 P9 PCIECLKRQ1# / GPIO18 U4 PCIECLKRQ2# / GPIO20 N4 PCIECLKRQ3# / GPIO25 A8 PCIECLKRQ4# / GPIO26 M9 PCIECLKRQ5# / GPIO44 H6 PCIECLKRQ6# / GPIO45 H3 PCIECLKRQ7# / GPIO46 F1 PIRQE# / GPIO2 B41 Reserved BF5 K6 PIRQF# / GPIO3 K53 RI# F14 BG10 PIRQG# / GPIO4 A36 RSMRST# C16 PIRQH# / GPIO5 A48 RTCRST# C14 PLOCK# D49 RTCX1 B13 PLTRST# D5 RTCX2 D13 M7 SATA0GP / GPIO21 PCIRST# PECI PEG_A_CLKRQ# / GPIO47 PEG_B_CLKRQ# / GPIO56 Datasheet Ball # H1 P13 PERn1 BG30 PERn2 AW30 PERn3 AU30 PERn4 BA32 PME# Y9 PMSYNCH BJ10 SATA0RXN PROCPWRGD BE10 SATA0RXP AK6 P5 SATA0TXN AK11 B17 SATA0TXP AK9 PWRBTN# PWROK AK7 299 Ballout Definition PCH Mobile Ball Name Ball # SATA1GP / GPIO19 V1 Ball # PCH Mobile Ball Name Ball # SATA1RXN AH6 SLP_LAN# / GPIO29 TP12 AK41 SATA1RXP AH5 SLP_M# K8 TP13 AK42 SATA1TXN AH9 SLP_S3# P12 TP14 M32 SATA1TXP AH8 SLP_S4# H7 TP15 N32 SATA2GP / GPIO36 AB7 SLP_S5# / GPIO63 E4 TP16 M30 SATA2RXN AF11 B9 TP17 N30 SATA2RXP AF9 SMBALERT# / GPIO11 TP18 H12 SATA2TXN AF7 TP19 AA23 SATA2TXP AF6 SMBCLK F6 H14 SMBDATA C8 SML0ALERT# / GPIO60 J14 SML0CLK C6 SML0DATA G8 TP11 AJ24 TP23 N2 TP24 C10 TRDY# C48 TRST# J4 SATA3GP / GPIO37 AB13 SATA3RXN AH3 SATA3RXP AH1 SATA3TXN AF3 SATA3TXP AF1 SML1ALERT# / GPIO74 M14 SATA4GP / GPIO16 AA2 SML1CLK / GPIO58 E10 SATA4RXN AD9 SATA4RXP AD8 SML1DATA / GPIO75 G12 SATA4TXN AD6 SPI_CLK BA2 SATA4TXP AD5 SPI_CS0# AV3 USBP3N J20 SPI_CS1# AY3 USBP3P L20 USBP0N H18 USBP0P J18 USBP1N A18 USBP1P C18 USBP2N N20 USBP2P P20 SATA5GP / GPIO49/ TEMP_ALERT# AA4 SPI_MISO AV1 USBP4N F20 SATA5RXN AD3 SPI_MOSI AY1 USBP4P G20 SATA5RXP AD1 SPKR SATA5TXN AB3 SRTCRST# SATA5TXP AB1 SATAICOMPI AF15 SATAICOMPO AF16 P1 USBP5N A20 D17 USBP5P C20 STOP# D41 USBP6N M22 STP_PCI# / GPIO34 M11 USBP6P N22 SUS_PWR_DN_ACK / GPIO30 M1 USBP7N B21 SUS_STAT# / GPIO61 USBP7P D21 P8 USBP8N H22 SUSCLK / GPIO62 F3 SYS_PWROK M6 SYS_RESET# T6 SATALED# T3 SCLOCK / GPIO22 Y7 SDATAOUT0 / GPIO39 P3 SDATAOUT1 / GPIO48 AB6 SDVO_CTRLCLK T51 THRMTRIP# SDVO_CTRLDATA 300 PCH Mobile Ball Name BD10 T53 TP1 BA22 SDVO_INTN BF45 TP2 AW22 SDVO_INTP BH45 TP3 BB22 SDVO_STALLN BJ48 TP4 AY45 SDVO_STALLP BG48 TP5 AY46 SDVO_TVCLKINN BJ46 TP6 AV43 SDVO_TVCLKINP BG46 TP7 AV45 SERIRQ AB9 TP8 AF13 SERR# E44 TP9 M18 SLOAD / GPIO38 V3 TP10 N18 USBP8P J22 USBP9N E22 USBP9P F22 USBP10N A22 USBP10P C22 USBP11N G24 USBP11P H24 USBP12N L24 USBP12P M24 USBP13N A24 USBP13P C24 USBRBIAS D25 USBRBIAS# B25 V_CPU_IO AT18 Datasheet Ballout Definition PCH Mobile Ball Name V_CPU_IO 301 Ball # AU18 PCH Mobile Ball Name Ball # PCH Mobile Ball Name Ball # VccFDIPLL BJ18 VccIO AD22 V5REF K49 VccIO AN30 VccIO AF19 V5REF_Sus F24 VccIO AN31 VccIO AF20 Vcc3_3 AB34 VccIO AN23 VccIO AF22 Vcc3_3 AB35 VccIO AN24 VccIO AH20 Vcc3_3 AD35 VccIO AN26 VccIO AH19 Vcc3_3 AN35 VccIO AN28 VccIO AF32 Vcc3_3 AD13 VccIO AT26 VccIO AF34 Vcc3_3 V15 VccIO AT28 VccIO AH34 Vcc3_3 V16 VccIO AU26 VccIO V24 Vcc3_3 Y16 VccIO AU28 VccIO V26 Vcc3_3 J38 VccIO AV26 VccIO Y24 Vcc3_3 L38 VccIO AV28 VccIO Y26 Vcc3_3 M36 VccIO AW26 VccLAN Vcc3_3 N36 VccIO AW28 VccLAN AF24 Vcc3_3 P36 VccIO BA26 VccME AD38 Vcc3_3 U35 VccIO BA28 VccME AD39 VccAClk AP51 VccIO BB26 VccME AD41 VccAClk AP53 VccIO BB28 VccME AF41 VccADAC AE50 VccIO BC26 VccME AF42 VccADAC AE52 VccIO BC28 VccME AF43 VccADPLLA BB51 VccIO BD26 VccME AA34 VccADPLLA BB53 VccIO BD28 VccME Y34 VccADPLLB BD51 VccIO BE26 VccME Y35 VccADPLLB BD53 VccIO BE28 VccME AA35 VccALVDS AH38 VccIO BG26 VccME V39 VccAPLLEXP BJ24 VccIO BG28 VccME V41 VccCore AB24 VccIO BH27 VccME V42 VccCore AB26 VccIO BJ26 VccME Y39 VccCore AB28 VccIO BJ28 VccME Y41 VccCore AD26 VccIO AN20 VccME Y42 VccCore AD28 VccIO AN22 VccME3_3 AM8 VccCore AF26 VccIO V23 VccME3_3 AM9 VccCore AF28 VccIO AH23 VccME3_3 AP11 VccCore AF30 VccIO AH35 VccME3_3 AP9 VccCore AF31 VccIO AJ35 VccPNAND AK13 VccCore AH26 VccIO AH22 VccPNAND AK15 VccCore AH28 VccIO AK24 VccPNAND AK16 VccCore AH30 VccIO AM23 VccPNAND AK19 VccCore AH31 VccIO AB19 VccPNAND AK20 VccCore AJ30 VccIO AB20 VccPNAND AM12 VccCore AJ31 VccIO AB22 VccPNAND AM13 VccDMI AT16 VccIO AD19 VccPNAND AM15 VccDMI AU16 VccIO AD20 VccPNAND AM16 AF23 Datasheet Ballout Definition PCH Mobile Ball Name Datasheet PCH Mobile Ball Name Ball # PCH Mobile Ball Name Ball # Ball # VccRTC A12 Vss AU22 Vss AF39 VccSATAPLL AK1 Vss AV18 Vss AF45 VccSATAPLL AK3 Vss AA19 Vss AF46 VccSus3_3 U23 Vss AA20 Vss AF49 VccSus3_3 P18 Vss AA22 Vss AF5 VccSus3_3 U19 Vss AA24 Vss AF8 VccSus3_3 U20 Vss AA26 Vss AG2 VccSus3_3 U22 Vss AA28 Vss AG52 VccSus3_3 A26 Vss AA30 Vss AH11 VccSus3_3 A28 Vss AA31 Vss AH15 VccSus3_3 B27 Vss AA32 Vss AH16 VccSus3_3 C26 Vss AA50 Vss AH24 VccSus3_3 C28 Vss AB11 Vss AH32 VccSus3_3 E26 Vss AB15 Vss AH43 VccSus3_3 E28 Vss AB23 Vss AH47 VccSus3_3 F26 Vss AB30 Vss AH48 VccSus3_3 F28 Vss AB31 Vss AH49 VccSus3_3 G26 Vss AB32 Vss AH7 VccSus3_3 G28 Vss AB39 Vss AJ19 VccSus3_3 H26 Vss AB43 Vss AJ2 VccSus3_3 H28 Vss AB47 Vss AJ20 VccSus3_3 J26 Vss AB5 Vss AJ22 VccSus3_3 J28 Vss AB8 Vss AJ23 VccSus3_3 L26 Vss AC2 Vss AJ26 VccSus3_3 L28 Vss AC52 Vss AJ28 VccSus3_3 M26 Vss AD11 Vss AJ32 VccSus3_3 M28 Vss AD15 Vss AJ34 VccSus3_3 N26 Vss AD16 Vss AJ4 VccSus3_3 N28 Vss AD23 Vss AK12 VccSus3_3 P26 Vss AD24 Vss AK22 VccSus3_3 P28 Vss AD30 Vss AK23 VccSus3_3 U24 Vss AD31 Vss AK26 VccSus3_3 U26 Vss AD32 Vss AK28 VccSus3_3 U28 Vss AD34 Vss AK30 VccSus3_3 V28 Vss AD42 Vss AK31 VccSusHDA L30 Vss AD46 Vss AK32 VccTX_LVDS AP43 Vss AD47 Vss AK34 VccTX_LVDS AP45 Vss AD49 Vss AK35 VccTX_LVDS AT45 Vss AD51 Vss AK38 VccTX_LVDS AT46 Vss AD7 Vss AK39 VccVRM AT24 Vss AE2 Vss AK43 VccVRM AT22 Vss AE4 Vss AK45 VccVRM AT20 Vss AF12 Vss AK46 VccVRM AU24 Vss AF35 Vss AK49 302 Ballout Definition PCH Mobile Ball Name 303 PCH Mobile Ball Name Ball # PCH Mobile Ball Name Ball # Ball # Vss AK5 Vss AT47 Vss BB12 Vss AK8 Vss AT5 Vss BB16 Vss AL2 Vss AT7 Vss BB20 Vss AL52 Vss AT8 Vss BB24 Vss AM11 Vss AU20 Vss BB30 Vss AM19 Vss AU4 Vss BB34 Vss AM20 Vss AV12 Vss BB38 Vss AM22 Vss AV14 Vss BB42 Vss AM24 Vss AV16 Vss BB44 Vss AM26 Vss AV20 Vss BB49 Vss AM28 Vss AV22 Vss BB5 Vss AM30 Vss AV24 Vss BC10 Vss AM31 Vss AV30 Vss BC14 Vss AM32 Vss AV34 Vss BC18 Vss AM34 Vss AV38 Vss BC2 Vss AM35 Vss AV42 Vss BC22 Vss AM38 Vss AV46 Vss BC32 Vss AM39 Vss AV49 Vss BC36 Vss AM41 Vss AV5 Vss BC40 Vss AM42 Vss AV8 Vss BC44 Vss AM46 Vss AW14 Vss BC52 Vss AM49 Vss AW18 Vss BD48 Vss AM5 Vss AW2 Vss BD49 Vss AM6 Vss AW32 Vss BD5 Vss AM7 Vss AW36 Vss BE12 Vss AN19 Vss AW40 Vss BE16 Vss AN32 Vss AW52 Vss BE20 Vss AN50 Vss AY11 Vss BE24 Vss AN52 Vss AY43 Vss BE30 Vss AP12 Vss AY47 Vss BE34 Vss AP13 Vss AY7 Vss BE38 Vss AP42 Vss B11 Vss BE42 Vss AP46 Vss B15 Vss BE46 Vss AP49 Vss B19 Vss BE48 Vss AP5 Vss B23 Vss BE50 Vss AP8 Vss B31 Vss BE6 Vss AR2 Vss B35 Vss BE8 Vss AR52 Vss B39 Vss BF3 Vss AT11 Vss B43 Vss BF49 Vss AT12 Vss B47 Vss BF51 Vss AT13 Vss B7 Vss BF9 Vss AT32 Vss BA12 Vss BG12 Vss AT36 Vss BA42 Vss BG18 Vss AT41 Vss BB10 Vss BG24 Datasheet Ballout Definition PCH Mobile Ball Name Datasheet PCH Mobile Ball Name Ball # PCH Mobile Ball Name Ball # Ball # Vss BG4 Vss H38 Vss T43 Vss BG50 Vss H42 Vss T46 Vss BH11 Vss H49 Vss T49 Vss BH15 Vss H5 Vss T5 Vss BH19 Vss J24 Vss T8 Vss BH23 Vss K11 Vss U30 Vss BH31 Vss K43 Vss U31 Vss BH35 Vss K47 Vss U32 Vss BH39 Vss K7 Vss U34 Vss BH43 Vss L14 Vss V11 Vss BH47 Vss L18 Vss V19 Vss BH7 Vss L2 Vss V20 Vss BH9 Vss L22 Vss V22 Vss C12 Vss L32 Vss V30 Vss C50 Vss L36 Vss V31 Vss D51 Vss L40 Vss V32 Vss E12 Vss L52 Vss V34 Vss E16 Vss M12 Vss V35 Vss E20 Vss M16 Vss V38 Vss E24 Vss M20 Vss V43 Vss E30 Vss M34 Vss V45 Vss E34 Vss M38 Vss V46 Vss E38 Vss M42 Vss V47 Vss E42 Vss M46 Vss V49 Vss E46 Vss M49 Vss V5 Vss E48 Vss M5 Vss V7 Vss E6 Vss M8 Vss V8 Vss E8 Vss N24 Vss W2 Vss F49 Vss N38 Vss W52 Vss F5 Vss P11 Vss Y11 Vss G10 Vss P16 Vss Y12 Vss G14 Vss P22 Vss Y13 Vss G18 Vss P30 Vss Y15 Vss G2 Vss P32 Vss Y19 Vss G22 Vss P34 Vss Y23 Vss G32 Vss P38 Vss Y28 Vss G36 Vss P42 Vss Y30 Vss G40 Vss P45 Vss Y31 Vss G44 Vss P47 Vss Y32 Vss G52 Vss P49 Vss Y38 Vss H16 Vss R2 Vss Y43 Vss H20 Vss R52 Vss Y46 Vss H30 Vss T12 Vss Y47 Vss H34 Vss T41 Vss Y5 304 Ballout Definition PCH Mobile Ball Name Vss Y6 Vss Y8 Vss AB16 Vss AN34 Vss AD12 Vss P24 Vss_NCTF A4 Vss_NCTF A49 Vss_NCTF A5 Vss_NCTF A50 Vss_NCTF A52 Vss_NCTF A53 Vss_NCTF B2 Vss_NCTF B4 Vss_NCTF B52 Vss_NCTF B53 Vss_NCTF BE1 Vss_NCTF BE53 Vss_NCTF BF1 Vss_NCTF BF53 Vss_NCTF BH1 Vss_NCTF BH2 Vss_NCTF BH52 Vss_NCTF BH53 Vss_NCTF BJ1 Vss_NCTF BJ2 Vss_NCTF BJ4 Vss_NCTF BJ49 Vss_NCTF BJ5 Vss_NCTF BJ50 Vss_NCTF BJ52 Vss_NCTF BJ53 Vss_NCTF D1 Vss_NCTF D2 Vss_NCTF D53 Vss_NCTF E1 Vss_NCTF E53 VssA_DAC AF51 VssA_DAC AF53 VssA_LVDS AH39 WAKE# 305 Ball # J12 XCLK_RCOMP AF38 XTAL25_IN AH51 XTAL25_OUT AH53 Datasheet Ballout Definition 6.3 PCH Ballout Small Form Factor Ballout This section contains the PCH Mobile Small Form Factor (SFF) ballout. Figure 6-5 and Figure 6-6 show the ballout from a top of the package quadrant view. Table 6-3 is the BGA ball list, sorted alphabetically by signal name. Datasheet 306 Ballout Definition Figure 6-5. 51 50 49 BE Vss_NCT Vss_NCT Vss_NCT F F F BD Vss_NCT Vss_NCT F F Vss BC Vss_NCT F Vss BB BA Vss TP4 AY AW AU CLKOUT _PCIE4P AP AN AL Vss Vss AH AG CLKOUT _PEG_A _P AF AE AA XTAL25_ IN L_CTRL_ DATA Vss L J AD15 F E PIRQF# / GPIO3 AD18 Vss AD1 AD26 Vss_NCT F Vss B Vss_NCT Vss_NCT F F Vss A Vss_NCT Vss_NCT Vss_NCT F F F 51 307 50 49 PAR Vss Vss 47 46 45 44 Vss Vss Vss VCCTX_ LVDS VCCTX_ LVDS VccIO VccIO Vss VccAPLL EXP AM Vss Vss VccIO VccIO AK AJ VccCore VccCore VccCore VccCore AH AG Vss Vss VccCore VccCore AF AE VccA_LV DS VSSA_L VDS VccIO VccIO VccME VccME Vss Vss Vss Vss Vss Vss VccME VccME Vss Vss AC Vcc3_3 Vcc3_3 Vcc3_3 Vcc3_3 VccME VccME Vss Vss AB AD AA Vss Vcc3_3 Vcc3_3 Vss Vss Vss VccME VccME VccME Vss Vss VccME VccME Vss Vss VccME VccME VccME Y W V U VccME1 _1 Vss VccME Vss Vss Vss Vss VSS T R Vcc3_3 Vcc3_3 Vcc3_3 Vcc3_3 Vcc3_3 Vcc3_3 Vss VccSus3 _3 P N Vss AD2 AD8 Vss 39 IRDY# 38 37 FWH1 / LAD1 35 HDA_DOC K_RST# / GPIO13 34 33 HDA_SY NC 31 30 H J G Vss D Vss B C USBRBI AS 28 27 Datasheet F E USBRBI AS# HDA_SD IN0 29 Vss L Vss HDA_SD IN3 HDA_SD IN2 LDRQ0# 32 K HDA_BC LK HDA_RS T# Vss Vss USBP12 P Vss Vss FWH3 / LAD3 Vss HDA_SD O FWH2 / LAD2 M USBP12 N Vss Vss FWH0 / LAD0 GPIO17 GPIO6 36 Vss Vss AD7 PIRQA# LDRQ1# / GPIO23 HDA_DOC K_EN# / GPIO33 Vss Vss Vss VccSusH DA HDA_SD IN1 TP15 FWH4 / LFRAME# Vss TP14 Vss Vss Vss AD11 Vss V5REF GPIO7 AD19 AD20 40 Vss Vss TP16 Vss Vss AD25 GPIO1 AD4 AD0 AD6 STOP# Vss TP17 Vss Vss Vss PLOCK# 41 TRDY# AD3 Vss REQ2# / GPIO52 Vss Vss Vss Vss Vss PIRQB# AD9 GNT2# / GPIO53 42 Vss REQ0# Vss Vss 43 VCCTX_ LVDS REQ1# / GPIO50 CLKIN_P CILOOP BACK PIRQH# / GPIO5 AD10 VCCTX_ LVDS AD31 AD29 PIRQD# Vss Vss AL C/BE2# AD27 AD5 Vss Vss Vss PIRQG# / GPIO4 C/BE1# Vss Vss Vss FRAME# AD23 AD17 48 PERR# AD28 Vss AD30 Vss Vss Vss DEVSEL # C GNT3# / GPIO55 Vss Vss Vss AP Vss NC_5 AD24 Vss Vss C/BE3# PIRQE# / GPIO2 D Vss Vss Vss Vss Vss VccADPL VccADPLL LA B VSS CLKOUT FLEX1 / GPIO65 CLKOUT _PCI0 AD22 C/BE0# PIRQC# SERR# Vss GNT1# / GPIO51 Vss Vss CLKOUT FLEX3 / GPIO67 AD16 AD14 GNT0# AD21 Vss Vss NC_4 CLKOUT FLEX2 / GPIO66 AT AR NC_1 Vss Vss Vss PETp3 Vss AV AU NC_3 L_DDC_ CLK CLKOUT _PCI1 Vss AD13 Vss H G CLKOUT _PCI3 AD12 K REFCLK 14IN Vss REQ3# / GPIO54 M Vss Vss Vss AY AW PETn3 PETp4 Vss BA Vss Vss Vss BC PERn3 PETn4 PETn7 Vss Vcc3_3 Vss Vss Vss Vss Vss NC_2 DAC_IR EF DDPC_C TRLDAT A Vss Vss PERp6 BB AN Vss Vss Vss Vss L_CTRL_ CLK Vss CRT_RE D CRT_VS YNC DDPC_C TRLCLK CLKOUT _PCI4 CLKOUT FLEX0 / GPIO64 CRT_GR EEN Vss Vss VSS PERp3 Vss PERn5 PETp7 BD LVD_VB G CRT_IRT N Vss Vss Vss L_BKLTC TL CLKOUT _PCI2 Vss CRT_HS YNC Vss Vss Vss Vss PERn6 SDVO_S TALLP PERp5 PETp6 BE Vss PERp2 PERp4 Vss 26 LVD_VR EFL LVD_IB G VccADA C CRT_BL UE L_BKLTE N L_VDD_ EN Vss SDVO_C TRLDAT A Vss P N CRT_DD C_CLK Vss Vss TP17 VssA_D AC Vss SDVO_C TRLCLK T R XTAL25_ OUT Vss L_DDC_ DATA Vss TP16 DDPD_C TRLCLK DDPD_C TRLDAT A V U Vss Vss PETp5 PETn6 27 PERn2 LVDSB_ DATA3 LVD_VR EFH Vss Vss 28 PERn4 VSS Vss DDPD_3N SDVO_S TALLN Vss PERp7 DDPD_3P 29 PETn5 LVDSB_ DATA#0 Vss LVDSB_ CLK Vss Vss Vss LVDSB_ DATA#3 Vss Vss 30 Vss PERp8 Vss DDPC_3 P DDPD_H PD SDVO_T VCLKINP PETp8 DDPC_3 N 31 PERn7 LVDSA_ DATA2 LVDSB_ DATA0 LVDSB_ DATA#1 LVDSB_ CLK# Vss XCLK_R COMP CRT_DD C_DATA Y W CLKOUT _PEG_A _N VccA_CL K AB Vss Vss Vss LVDSB_ DATA2 Vss 32 PERn8 VSS Vss DDPC_2 N 33 PETn8 DDPD_2 N DDPC_2 P SDVO_T VCLKIN N LVDSA_ DATA#0 LVDSA_ DATA#2 Vss LVDSB_ DATA1 CLKOUT _PEG_B _N Vss AD AC CLKOUT _PCIE7N Vss LVDSA_ CLK# LVDSB_ DATA#2 Vss 34 Vss DDPC_H PD Vss SDVO_I NTP 35 DDPD_2 P DDPD_0 N SDVO_I NTN Vss LVDSA_ DATA0 Vss Vss Vss CLKOUT _PEG_B _P LVDSA_ DATA3 LVDSA_ CLK CLKOUT _PCIE0N Vss 36 DDPB_H PD Vss Vss DDPB_A UXP 37 DDPD_0 P DDPD_1 P DDPB_A UXN Vss Vss Vss CLKOUT _PCIE5N CLKOUT _PCIE7P LVDSA_ DATA#3 Vss CLKOUT _PCIE0P Vss Vss CLKOUT _PCIE6N CLKOUT _PCIE5P AK AJ CLKOUT _PCIE2N CLKOUT _PCIE4N CLKOUT _PCIE6P AM Vss 38 Vss DDPC_0 N Vss DDPC_A UXP 39 DDPD_1 N DDPC_1 N DDPC_A UXN LVDSA_ DATA#1 40 DDPC_0 P Vss DDPD_A UXN Vss 41 DDPC_1 P DDPB_3 N DDPD_A UXP LVDSA_ DATA1 42 Vss DDPB_1 N Vss Vss 43 DDPB_3 P DDPB_1 P Vss Vss 44 DDPB_2 N Vss CLKOUT _PCIE3N CLKOUT _PCIE2P AT AR 45 DDPB_2 P DDPB_0 N TP7 Vss 46 Vss CLKOUT _PCIE1N CLKOUT _PCIE3P 47 DDPB_0 P TP5 CLKOUT _PCIE1P PCH ballout (top view--left side) (Mobile SFF Only) Vss TP6 AV 48 A 26 Ballout Definition Figure 6-6. 25 BE 24 PETp1 BD BC PETn1 AW AV AU Vss AR Vss PETp2 AP Vss VccVRM Vss Vss VccVRM VccVRM Vss Vss DMIRXTE RM FDI_RXN 3 FDIRXTE RM Vss FDI_RXP 5 Vss AK VccIO VccIO VccIO VccIO VccIO VccIO VccIO Vss Vss Vss VccIO Vss VccIO V_CPU_I V_CPU_I O O Vss Vss Vss Vss Vss Vcc_DMI Vss VccPNAN VccPNAN D D VccE3_3 VccE3_3 VSS VccCore VccCore VccLAN VccPNAN VccPNAN D D VccLAN VccME3_ 3 VccE3_3 SATAICO MPI AD VccCore VccCore Vss Vss VccIO Vss VccIO VccIO VccCore Vss Vss VccIO VccIO VccIO VccIO VccCore Vss Vss VccIO VccIO VccIO VccIO Vss VSS VccCore VccCore Vss Vcc3_3 Vcc3_3 Vss Vss Vss Vss VccIO VccIO VccIO Vss DcpSusB yp Vss DcpSusB yp T VccSus3_ 3 VccIO Vss VccIO VccIO VccIO Vss Vss P VccSus3_ VccSus3_ 3 3 VccSus3_ 3 VccSus3_ VccSus3_ 3 3 Vss VccSus3_ 3 VccSus3_ 3 Vss USBP9N K J Vss USBP13P B A SYS_PW ROK USBP10P USBP11P 25 USBP8P 24 308 Vss 23 USBP2N 22 21 Vss 20 19 OC3# / GPIO42 18 RTCRST# SML1DAT A/ GPIO75 17 OC7# / GPIO14 15 LAN_RST # SML1CLK / GPIO58 Vss 14 13 12 PCIECLK RQ3# / GPIO25 Vss 11 SML1ALE RT# / GPIO74 10 SML0CLK PEG_B_C LKRQ# / GPIO56 9 7 R T P J H JTAG_TD O G F Vss_NCT F E D SLP_S4# 3 L K Vss_NCT F Vss_NCT F C B Vss_NCT F 4 N M PCIRST# Vss 5 SDATAO UT0 / GPIO39 V TRST# PCIECLK RQ4# / GPIO26 Vss_NCT F 6 U Vss PLTRST# Vss GPIO57 8 SPKR GPIO28 Vss BATLOW #/ GPIO72 WAKE# W SUS_STA T# / GPIO61 SLP_S3# SLP_LAN #/ GPIO29 DRAMPW ROK Y JTAG_TM S GPIO15 AA CLKRUN #/ GPIO32 PCIECLK RQ2# / GPIO20 PCIECLK RQ5# / GPIO44 AC AB Vss PCIECLK RQ7# / GPIO46 LAN_PHY _PWR_C TRL / GPIO12 Vss OC0# / GPIO59 SMBDAT A RTCX1 GPIO24 SML0ALE RT# / GPIO60 OC6# / GPIO10 JTAG_TC K Vss AD GPIO27 PCIECLK RQ0# / GPIO73 Vss SLP_S5# / GPIO63 Vss JTAG_TDI PCIECLK RQ6# / GPIO45 GPIO8 INTVRME N RTCX2 OC4# / GPIO43 16 TP24 VccRTC Vss AF INIT3_3V # SATA3GP / GPIO37 Vss AE Vss SUS_PW R_DN_A CK / GPIO30 STP_PCI #/ GPIO34 PME# SML0DAT A Vss Vss RSMRST # PWROK RI# Vss Vss Vss SLP_M# SMBALE RT# / GPIO11 OC2# / GPIO41 OC1# / GPIO40 OC5# / GPIO9 USBP0N Vss Vss Vss Vss TP17 INTRUDE R# CLKIN_D OT_96P USBP0P USBP5P Vss Vss USBP2P Vss SRTCRS T# CLKIN_D OT_96N USBP3P USBP5N Vss SMBCLK SATA1RX N SATA1GP / GPIO19 SYS_RES ET# Vss AG SATA4TX P SLOAD / GPIO38 GPIO35 ACPRES ENT / GPIO31 SATA1TX P RCIN# SATA0GP / GPIO21 Vss PWRBTN # VSS MEPWRO K Vss SUSCLK / GPIO62 Vss AJ AH Vss SDATAO UT1 / GPIO48 SCLOCK / GPIO22 AK SATA4RX P SATA4TX N SATA2GP / GPIO36 Vss SATALED # PEG_A_C LKRQ# / GPIO47 CL_RST1 # Vss Vss DcpRTC TP9 Vss Vss Vss USBP8N Vss USBP3N USBP4P Vss TP10 USBP1N Vss Vss USBP10N USBP11N Vss USBP4N USBP7P Vss USBP1P V5REF_S US Vss Vss D C Vss USBP7N USBP13N Vss Vss USBP6N Vss F E Vss USBP6P USBP9P H G CL_DATA 1 DcpSST M Vss AP CLKOUT_ DP_P / AN CLKOUT_ BCLK1_P AM CLKOUT_ AL DMI_P Vss Vss BMBUSY # / GPIO0 AT Vss SATA4RX N Vss SATA5TX N AR Vss SATA1RX P Vss Vss SERIRQ TP23 PCIECLK RQ1# / GPIO18 N L SATA4GP / GPIO16 A20GATE Vss SATA5TX P Vss SATA1TX N SATA3TX N Vss Reserved AV Vss Vss Vss AU VCCSATA PLL Vss SATA2TX P SATA3TX P Vss SATA5RX P CL_CLK1 R Vss Vss Vss U Vss NV_CLE AY CLKOUT_ BCLK0_N / CLKOUT_ PCIE8N Vss CLKIN_S ATA_N / CKSSCD _N SATA2TX N SATA3RX N Vss SATA5GP / GPIO49 / TMP_ALE RT# W V VSS SATA5RX N AA Vss Vss CLKOUT_ DMI_N SATA0RX P VSS CLKIN_S ATA_P / CKSSCD _P SATA2RX P SATA3RX P VccCore VccCore Y SATAICO MPO Vss AC AB Vss SATA0TX P Vss CLKOUT_ BCLK0_P / CLKOUT_ PCIE8P Vss AW CLKIN_B CLK_P CLKOUT_ DP_N / CLKOUT_ BCLK1_N SPI_CLK SATA0RX N TP8 SATA2RX N AE Vss Vss CLKIN_B CLK_N Vss SPI_CS0 # Reserved Vss Reserved SPI_MIS O BA Reserved NV_ALE Reserved Vss Vss Vss Reserved Reserved BC Reserved Vss Reserved Reserved SPI_MOS I SPI_CS1 # SATA0TX N AG AF Vss Vcc3_3 Vss Vss Vss Reserved BE BD BB Reserved Vss Reserved Reserved Reserved Reserved AJ AH Vss Reserved Reserved Reserved Reserved AL Vss Vss 3 2 1 Vss_NCT Vss_NCT Vss_NCT F F F Vss_NCT Vss_NCT Vss F F Vss_NCT Vss F Reserved Vss Reserved Reserved Reserved AN AM Vss 4 Reserved Vss Reserved Reserved 5 THRMTRI P# Vss Vss Vss 6 PECI Reserved VSS 7 PROCPW RGD FDI_FSY NC0 Vss Vss Vss FDI_FSY NC1 FDI_RXN 7 FDI_RXN 5 8 PMSYNC H Vss FDI_RXP 7 FDI_RXN 6 9 FDI_LSY NC0 Vss Vss Vss 10 FDI_LSY NC1 FDI_RXP 6 FDI_RXP 3 Vss 11 FDI_INT FDI_RXN 2 Vss FDI_RXN 1 FDI_RXP 0 VccVRM Vss FDI_RXP 1 FDI_RXN 0 Vss 12 FDI_RXP 2 Vss VSS DMI3RXN 13 FDI_RXP 4 FDI_RXN 4 DMI3TXP DMI3RXP TP3 Vss 14 Vss VSS Vss DMI0TXP 15 DMI3TXN DMI2RXN DMI0TXN TP2 Vss 16 VCCFDIP LL Vss Vss DMI_IRC OMP 17 DMI2RXP DMI1RXP DMI_ZCO MP TP1 Vss 18 Vss DMI2TXP Vss CLKIN_D MI_P 19 DMI1RXN DMI0RXN CLKIN_D MI_N PETn2 AT 20 DMI2TXN Vss Vss PERp1 21 DMI0RXP DMI1TXN PERn1 PCH ballout (top view--right side) (Mobile SFF Only) Vss Vss AY 22 DMI1TXP Vss BB BA 23 A 2 Datasheet 1 Ballout Definition Table 6-3. PCH Ballout by Signal name (Mobile SFF Only) PCH SFF Ball Name A20GATE Datasheet Ball # V10 PCH SFF Ball Name Ball # PCH SFF Ball Name Ball # CL_CLK1 U11 CLKOUT_PCIE6N AN49 CL_DATA1 T10 CLKOUT_PCIE6P AN51 ACPRESENT / GPIO31 N7 CL_RST1# P10 CLKOUT_PCIE7N AJ49 AD0 B40 CLKIN_BCLK_N AP4 CLKOUT_PCIE7P AJ51 AD1 G47 CLKIN_BCLK_P AP2 CLKOUT_PEG_A_N AG49 AD2 E39 CLKIN_DMI_N BA23 CLKOUT_PEG_A_P AG51 AD3 G39 CLKIN_DMI_P AW23 CLKOUT_PEG_B_N AH48 AD4 C39 CLKIN_DOT_96N G17 CLKOUT_PEG_B_P AH50 AD5 C45 CLKIN_DOT_96P E17 AD6 J35 N51 C35 A43 CLKOUTFLEX0 / GPIO64 AD7 CLKIN_PCILOOPBA CK CLKIN_SATA_N / CKSSCD_N R41 AG5 CLKOUTFLEX1 / GPIO65 CLKIN_SATA_P / CKSSCD_P R43 AG7 CLKOUTFLEX2 / GPIO66 CLKOUT_BCLK0_N / CLKOUT_PCIE8N N45 AK2 CLKOUTFLEX3 / GPIO67 CLKRUN# / GPIO32 W1 CRT_BLUE AA47 CRT_DDC_CLK AA49 CRT_DDC_DATA AC51 CRT_GREEN AA45 CRT_HSYNC W47 AD8 A41 AD9 J39 AD10 A47 AD11 D36 AD12 L51 AD13 L49 AD14 K48 AD15 J51 AD16 L47 AD17 C47 AD18 J49 CLKOUT_BCLK0_P / CLKOUT_PCIE8P AK4 CLKOUT_DMI_N AL3 CLKOUT_DMI_P AL1 CLKOUT_DP_N / CLKOUT_BCLK1_N AN3 CRT_IRTN AC43 AN1 CRT_RED AA43 N43 CRT_VSYNC W45 W43 AD19 C37 CLKOUT_DP_P / CLKOUT_BCLK1_P AD20 A39 CLKOUT_PCI0 AD21 G51 CLKOUT_PCI1 R45 DAC_IREF AD22 L45 CLKOUT_PCI2 R51 DcpRTC L15 N11 AD23 E45 CLKOUT_PCI3 N49 DcpSST AD24 L43 CLKOUT_PCI4 R49 DcpSus T18 T19 AD25 G35 CLKOUT_PCIE0N AM48 DcpSus AD26 E49 CLKOUT_PCIE0P AM50 DcpSusByp V14 V16 AD27 E43 CLKOUT_PCIE1N AW49 DcpSusByp AD28 G45 CLKOUT_PCIE1P AW51 DDPB_0N BC47 BE47 AD29 C43 CLKOUT_PCIE2N AT48 DDPB_0P AD30 L41 CLKOUT_PCIE2P AT50 DDPB_1N BB44 BD44 AD31 G41 CLKOUT_PCIE3N AU49 DDPB_1P BATLOW# / GPIO72 C5 CLKOUT_PCIE3P AU51 DDPB_2N BC45 BE45 C/BE0# J47 CLKOUT_PCIE4N AR49 DDPB_2P C/BE1# D46 CLKOUT_PCIE4P AR51 DDPB_3N BC43 BE43 BA41 C/BE2# J41 CLKOUT_PCIE5N AL49 DDPB_3P C/BE3# F48 CLKOUT_PCIE5P AL51 DDPB_AUXN 309 Ballout Definition PCH SFF Ball Name 310 Ball # PCH SFF Ball Name Ball # PCH SFF Ball Name Ball # DDPB_AUXP AW41 DMI2TXN BD20 GPIO7 E35 DDPB_HPD BD36 DMI2TXP BB20 GPIO8 G9 DDPC_0N BB40 DMI3RXN AW17 GPIO15 G5 DDPC_0P BD40 DMI3RXP BA17 GPIO17 C33 DDPC_1N BC41 DMI3TXN BE15 GPIO24 G7 DDPC_1P BE41 DMI3TXP BC15 GPIO27 L3 DDPC_2N AW37 DRAMPWROK D6 GPIO28 L1 DDPC_2P BA37 FDI_FSYNC0 BB8 GPIO35 R5 DDPC_3N BA35 FDI_FSYNC1 BC9 GPIO57 A7 DDPC_3P AW35 FDI_INT BE11 HDA_BCLK E27 DDPC_AUXN BA43 FDI_LSYNC0 BE9 DDPC_AUXP AW43 FDI_LSYNC1 BC11 HDA_DOCK_EN# / GPIO33 E33 DDPC_CTRLCLK U47 FDI_RXN0 AU17 A33 DDPC_CTRLDATA U45 FDI_RXN1 AW15 HDA_DOCK_RST# / GPIO13 DDPC_HPD BB36 FDI_RXN2 BB12 HDA_RST# C29 DDPD_0N BC37 FDI_RXN3 AR15 HDA_SDIN0 B28 DDPD_0P BE37 FDI_RXN4 BC13 HDA_SDIN1 J29 DDPD_1N BE39 FDI_RXN5 AU13 HDA_SDIN2 A29 DDPD_1P BC39 FDI_RXN6 AW13 HDA_SDIN3 D28 DDPD_2N BC35 FDI_RXN7 AW11 HDA_SDO G29 DDPD_2P BE35 FDI_RXP0 AR17 DDPD_3N AW33 FDI_RXP1 BA15 DDPD_3P BA33 FDI_RXP2 BD12 DDPD_AUXN AY44 FDI_RXP3 AU15 DDPD_AUXP BA45 FDI_RXP4 BE13 DDPD_CTRLCLK AC49 FDI_RXP5 AR13 DDPD_CTRLDATA AA51 FDI_RXP6 BA13 DDPD_HPD AU37 FDI_RXP7 BA11 DEVSEL# D48 FRAME# G43 DMI_IRCOMP AW21 FWH0 / LAD0 E31 DMI_ZCOMP BA21 FWH1 / LAD1 D32 DMI0RXN BC21 FWH2 / LAD2 C31 DMI0RXP BE21 FWH3 / LAD3 B32 DMI0TXN BA19 FWH4 / LFRAME# G33 DMI0TXP AW19 GNT0# H50 DMI1RXN BE19 GNT1# / GPIO51 H48 DMI1RXP BC19 GNT2# / GPIO53 DMI1TXN BC23 DMI1TXP HDA_SYNC E29 INIT3_3V# P2 INTRUDER# G15 INTVRMEN E11 IRDY# A37 JTAG_TCK J5 JTAG_TDI L5 JTAG_TDO G1 JTAG_TMS J3 L_BKLTCTL U49 L_BKLTEN W49 L_CTRL_CLK T48 L_CTRL_DATA T50 L_DDC_CLK U43 L_DDC_DATA W51 L_VDD_EN U51 C41 LAN_PHY_PWR_CTR L / GPIO12 F6 GNT3# / GPIO55 J45 LAN_RST# C11 BE23 GPIO0 W5 LDRQ0# A31 DMI2RXN BC17 GPIO1 E37 LDRQ1# / GPIO23 G31 DMI2RXP BE17 GPIO6 A35 LVD_IBG AE43 Datasheet Ballout Definition PCH SFF Ball Name Ball # LVD_VBG AE41 LVD_VREFH AG43 LVD_VREFL AG41 LVDSA_CLK AP46 LVDSA_CLK# AP44 LVDSA_DATA#0 AR41 LVDSA_DATA#1 AV44 LVDSA_DATA#2 AN43 LVDSA_DATA#3 AT46 LVDSA_DATA0 AR43 LVDSA_DATA1 AV46 LVDSA_DATA2 AN41 LVDSA_DATA3 AT44 LVDSB_CLK AH44 LVDSB_CLK# AH46 LVDSB_DATA#0 AL41 PCH SFF Ball Name PCIECLKRQ0# / GPIO73 K4 PCIECLKRQ1# / GPIO18 R11 PCIECLKRQ2# / GPIO20 N1 PCIECLKRQ3# / GPIO25 D8 PCIECLKRQ4# / GPIO26 C3 PCIECLKRQ5# / GPIO44 G3 PCIECLKRQ6# / GPIO45 J7 PCIECLKRQ7# / GPIO46 H4 PCIRST# F2 PECI BC7 PEG_A_CLKRQ# / GPIO47 R9 PCH SFF Ball Name Ball # PETn6 BA31 PETn7 AR31 PETn8 BE33 PETp1 BE25 PETp2 AR25 PETp3 AR27 PETp4 AR29 PETp5 BC29 PETp6 AW31 PETp7 AU31 PETp8 BC33 PIRQA# B36 PIRQB# L37 PIRQC# G49 PIRQD# B44 PIRQE# / GPIO2 D50 PIRQF# / GPIO3 M48 LVDSB_DATA#1 AK44 LVDSB_DATA#2 AM46 D44 AJ43 PEG_B_CLKRQ# / GPIO56 PIRQG# / GPIO4 LVDSB_DATA#3 A9 PIRQH# / GPIO5 A45 LVDSB_DATA0 AL43 PERn1 BA25 PLOCK# D40 LVDSB_DATA1 AK46 PERn2 BE27 PLTRST# D4 LVDSB_DATA2 AM44 PERn3 AW27 PME# L7 LVDSB_DATA3 AJ41 PERn4 BD28 PMSYNCH BD8 MEPWROK M10 PERn5 AW29 PROCPWRGD BE7 NC_1 W41 PERn6 AU33 PWRBTN# R7 NC_2 AC41 PERn7 BE31 PWROK D16 NC_3 AA41 PERn8 BD32 RCIN# U3 NC_4 U41 PERp1 AW25 REFCLK14IN R47 NC_5 N41 PERp2 BC27 REQ0# L39 NV_ALE AU3 PERp3 BA27 REQ1# / GPIO50 E41 NV_CLE AU1 PERp4 BB28 REQ2# / GPIO52 L35 OC0# / GPIO59 C9 PERp5 BA29 REQ3# / GPIO54 M50 OC1# / GPIO40 E15 PERp6 AR33 Reserved AU7 OC2# / GPIO41 G13 PERp7 BC31 Reserved AW3 OC3# / GPIO42 C15 PERp8 BB32 Reserved AL11 OC4# / GPIO43 A15 PERR# J43 Reserved BA7 OC5# / GPIO9 C17 PETn1 BC25 Reserved AT4 OC6# / GPIO10 D10 PETn2 AU25 Reserved BA3 OC7# / GPIO14 D12 PETn3 AU27 Reserved AN9 PAR E47 PETn4 AU29 Reserved AN11 BE29 Reserved AW7 PETn5 Datasheet Ball # 311 Ballout Definition PCH SFF Ball Name 312 Ball # PCH SFF Ball Name PCH SFF Ball Name Ball # Ball # Reserved BB2 SATA3RXP AC11 SMBDATA A11 Reserved BB4 SATA3TXN AC5 Reserved AW9 SATA3TXP AC7 SML0ALERT# / GPIO60 E9 Reserved BA9 SATA4GP / GPIO16 W9 SML0CLK B8 Reserved BC5 SATA4RXN AC3 SML0DATA J9 SML1ALERT# / GPIO74 E7 SML1CLK / GPIO58 B12 SML1DATA / GPIO75 A17 Reserved AR7 SATA4RXP AC1 Reserved AR5 SATA4TXN AA3 Reserved AR1 SATA4TXP AA1 Reserved AR9 Reserved AR11 SATA5GP / GPIO49/ TEMP_ALERT# W11 Reserved AU5 SATA5RXN AA11 Reserved AU9 SATA5RXP AA9 Reserved AW5 SATA5TXN AA5 Reserved AV2 SATA5TXP AA7 Reserved BA1 SATAICOMPI AF12 Reserved AV4 SATAICOMPO AF10 Reserved AW1 SATALED# U7 Reserved AR3 SCLOCK / GPIO22 U5 Reserved BA5 R1 RI# K10 SDATAOUT0 / GPIO39 RSMRST# D14 SDATAOUT1 / GPIO48 W3 RTCRST# B16 SDVO_CTRLCLK Y50 RTCX1 A13 SDVO_CTRLDATA Y48 RTCX2 C13 SDVO_INTN BA39 SATA0GP / GPIO21 T4 SDVO_INTP AW39 SATA0RXN AJ7 SDVO_STALLN AU35 SATA0RXP AJ5 SDVO_STALLP AR35 SATA0TXN AG11 SDVO_TVCLKINN AU39 SATA0TXP AG9 SDVO_TVCLKINP AR39 SATA1GP / GPIO19 V2 SERIRQ W7 SATA1RXN AE1 SERR# E51 SATA1RXP AE3 SLOAD / GPIO38 R3 SATA1TXN AG3 SATA1TXP AG1 SLP_LAN# / GPIO29 E5 SATA2GP / GPIO36 V4 SLP_M# L9 SATA2RXN AE11 SLP_S3# F4 SATA2RXP AE9 SLP_S4# D2 SATA2TXN AE7 SLP_S5# / GPIO63 H8 SATA2TXP AE5 J11 SATA3GP / GPIO37 M4 SMBALERT# / GPIO11 SATA3RXN AC9 SMBCLK L11 SPI_CLK AL5 SPI_CS0# AL7 SPI_CS1# AL9 SPI_MISO AN5 SPI_MOSI AN7 SPKR U1 SRTCRST# J15 STOP# G37 STP_PCI# / GPIO34 N5 SUS_PWR_DN_ACK / GPIO30 N3 SUS_STAT# / GPIO61 K2 SUSCLK / GPIO62 L13 SYS_PWROK N9 SYS_RESET# P4 THRMTRIP# BE5 TP1 AU23 TP2 AU21 TP3 AU19 TP4 BA51 TP5 BA49 TP6 AY50 TP7 AY48 TP8 AJ9 TP9 J17 TP10 L17 TP12 AE47 TP13 AE45 TP14 L29 TP15 J31 TP16 L31 Datasheet Ballout Definition PCH SFF Ball Name Datasheet Ball # PCH SFF Ball Name Ball # PCH SFF Ball Name Ball # TP17 L33 Vcc3_3 AB34 VccIO AM19 TP18 J13 Vcc3_3 AB36 VccIO AM21 TP23 U9 Vcc3_3 AB38 VccIO AM22 TP24 G11 Vcc3_3 Y36 VccIO AM24 TRDY# J37 Vcc3_3 Y38 VccIO AM25 TRST# J1 Vcc3_3 AM38 VccIO AM16 USBP0N A19 Vcc3_3 AJ11 VccIO AM18 USBP0P C19 Vcc3_3 Y18 VccIO T21 USBP1N J19 Vcc3_3 Y19 VccIO AD19 USBP1P L19 Vcc3_3 P30 VccIO AF33 USBP2N B20 Vcc3_3 P31 VccIO AF34 USBP2P D20 Vcc3_3 P33 VccIO AD16 USBP3N G19 Vcc3_3 P34 VccIO AK24 USBP3P E19 Vcc3_3 P36 VccIO AK21 USBP4N G21 Vcc3_3 P38 VccIO AB14 USBP4P E21 VccAClk AE51 VccIO AB16 USBP5N C21 VccADAC AC45 VccIO AB18 USBP5P A21 VccADPLLA AM34 VccIO AB19 USBP6N J23 VccADPLLB AM33 VccIO AC14 USBP6P L23 VccALVDS AD38 VccIO AC16 USBP7N G23 VccAPLLEXP AM27 VccIO AC18 USBP7P E23 VccCore AB24 VccIO AC19 USBP8N C23 VccCore AB25 VccIO AD14 USBP8P A23 VccCore AC24 VccIO AD33 USBP9N L25 VccCore AC25 VccIO AD34 USBP9P J25 VccCore AD24 VccIO T24 USBP10N D24 VccCore AD25 VccIO V21 USBP10P B24 VccCore AF24 VccIO V22 USBP11N C25 VccCore AF25 VccIO V24 USBP11P A25 VccCore AF27 VccLAN AF21 USBP12N J27 VccCore AF28 VccLAN AF22 USBP12P G27 VccCore AH27 VccME AB30 USBP13N E25 VccCore AH28 VccME AB31 USBP13P G25 VccCore AH30 VccME AC30 USBRBIAS A27 VccCore AH31 VccME AC31 USBRBIAS# C27 VccCore Y22 VccME AD30 V_CPU_IO AK18 VccCore Y24 VccME AD31 V_CPU_IO AK19 VccDMI AH22 VccME V34 V5REF J33 VCCFDIPLL BD16 VccME T34 V5REF_Sus J21 VccIO AK27 VccME T36 Vcc3_3 AB33 VccIO AK28 VccME V36 313 Ballout Definition PCH SFF Ball Name 314 PCH SFF Ball Name Ball # PCH SFF Ball Name Ball # Ball # VccME V27 Vss AB27 Vss AF46 VccME V28 Vss AB28 Vss AF48 VccME V30 Vss AB4 Vss AF50 VccME Y27 Vss AB40 Vss AF6 VccME Y28 Vss AB42 Vss AF8 VccME Y30 Vss AB44 Vss AG45 VccME3_3 AF14 Vss AB46 Vss AG47 VccME3_3 AF16 Vss AB48 Vss AH10 VccME3_3 AH14 Vss AB50 Vss AH2 VccME3_3 AH16 Vss AB6 Vss AH21 VccPNAND AF18 Vss AB8 Vss AH24 VccPNAND AF19 Vss AC21 Vss AH25 VccPNAND AH18 Vss AC22 Vss AH33 VccPNAND AH19 Vss AC27 Vss AH34 VccRTC E13 Vss AC28 Vss AH4 VCCSATAPLL AJ1 Vss AC33 Vss AH40 VccSus3_3 T25 Vss AC34 Vss AH42 VccSus3_3 P14 Vss AC36 Vss AH6 VccSus3_3 P16 Vss AC38 Vss AH8 VccSus3_3 P18 Vss AD10 Vss AJ3 VccSus3_3 P19 Vss AD12 Vss AJ45 VccSus3_3 P22 Vss AD18 Vss AJ47 VccSus3_3 P24 Vss AD2 Vss AK10 VccSus3_3 P25 Vss AD21 Vss AK12 VccSus3_3 P27 Vss AD22 Vss AK14 VccSusHDA L27 Vss AD27 Vss AK16 VccTX_LVDS AF36 Vss AD28 Vss AK22 VccTX_LVDS AF38 Vss AD4 Vss AK25 VccTX_LVDS AH36 Vss AD40 Vss AK30 VccTX_LVDS AH38 Vss AD42 Vss AK31 VccVRM AR21 Vss AD44 Vss AK33 VccVRM AP22 Vss AD46 Vss AK34 VccVRM AR19 Vss AD6 Vss AK36 VccVRM AR23 Vss AD8 Vss AK38 Vss AP18 Vss AF2 Vss AK40 Vss AP16 Vss AF30 Vss AK42 Vss AB10 Vss AF31 Vss AK48 Vss AB12 Vss AF4 Vss AK50 Vss AB2 Vss AF40 Vss AK6 Vss AB21 Vss AF42 Vss AK8 Vss AB22 Vss AF44 Vss AL45 Datasheet Ballout Definition PCH SFF Ball Name Datasheet PCH SFF Ball Name Ball # PCH SFF Ball Name Ball # Ball # Vss AL47 Vss AT2 Vss AW47 Vss AM10 Vss AT20 Vss AY10 Vss AM12 Vss AT22 Vss AY12 Vss AM14 Vss AT24 Vss AY14 Vss AM2 Vss AT26 Vss AY16 Vss AM28 Vss AT28 Vss AY18 Vss AM30 Vss AT30 Vss AY2 Vss AM31 Vss AT32 Vss AY20 Vss AM4 Vss AT34 Vss AY22 Vss AM40 Vss AT36 Vss AY24 Vss AM42 Vss AT38 Vss AY26 Vss AM6 Vss AT40 Vss AY28 Vss AM8 Vss AT42 Vss AY30 Vss AN45 Vss AT6 Vss AY32 Vss AN47 Vss AT8 Vss AY34 Vss AP10 Vss AU41 Vss AY36 Vss AP12 Vss AU43 Vss AY38 Vss AP14 Vss AU45 Vss AY4 Vss AP20 Vss AU47 Vss AY40 Vss AP24 Vss AV10 Vss AY42 Vss AP26 Vss AV12 Vss AY46 Vss AP28 Vss AV14 Vss AY6 Vss AP30 Vss AV16 Vss AY8 Vss AP32 Vss AV18 Vss B10 Vss AP34 Vss AV20 Vss B14 Vss AP36 Vss AV22 Vss B18 Vss AP38 Vss AV24 Vss B22 Vss AP40 Vss AV26 Vss B26 Vss AP42 Vss AV28 Vss B3 Vss AP48 Vss AV30 Vss B30 Vss AP50 Vss AV32 Vss B34 Vss AP6 Vss AV34 Vss B38 Vss AP8 Vss AV36 Vss B42 Vss AR37 Vss AV38 Vss B46 Vss AR45 Vss AV40 Vss B49 Vss AR47 Vss AV42 Vss B6 Vss AT10 Vss AV48 Vss BA47 Vss AT12 Vss AV50 Vss BB10 Vss AT14 Vss AV6 Vss BB14 Vss AT16 Vss AV8 Vss BB16 Vss AT18 Vss AW45 Vss BB18 315 Ballout Definition PCH SFF Ball Name 316 PCH SFF Ball Name Ball # PCH SFF Ball Name Ball # Ball # Vss BB22 Vss F20 Vss K20 Vss BB24 Vss F22 Vss K22 Vss BB26 Vss F24 Vss K24 Vss BB30 Vss F26 Vss K26 Vss BB34 Vss F28 Vss K28 Vss BB38 Vss F30 Vss K30 Vss BB42 Vss F32 Vss K32 Vss BB46 Vss F34 Vss K34 Vss BB48 Vss F36 Vss K36 Vss BB50 Vss F38 Vss K38 Vss BB6 Vss F40 Vss K40 Vss BC3 Vss F42 Vss K42 Vss BC49 Vss F44 Vss K44 Vss BD10 Vss F46 Vss K46 Vss BD14 Vss F50 Vss K50 Vss BD18 Vss F8 Vss K6 Vss BD22 Vss H10 Vss K8 Vss BD24 Vss H12 Vss L21 Vss BD26 Vss H14 Vss M12 Vss BD3 Vss H16 Vss M14 Vss BD30 Vss H18 Vss M16 Vss BD34 Vss H2 Vss M18 Vss BD38 Vss H20 Vss M2 Vss BD42 Vss H22 Vss M20 Vss BD46 Vss H24 Vss M22 Vss BD49 Vss H26 Vss M24 Vss BD6 Vss H28 Vss M26 Vss C49 Vss H30 Vss M28 Vss D18 Vss H32 Vss M30 Vss D22 Vss H34 Vss M32 Vss D26 Vss H36 Vss M34 Vss D30 Vss H38 Vss M36 Vss D34 Vss H40 Vss M38 Vss D38 Vss H42 Vss M40 Vss D42 Vss H44 Vss M42 Vss E3 Vss H46 Vss M44 Vss F10 Vss H6 Vss M46 Vss F12 Vss K12 Vss M6 Vss F14 Vss K14 Vss M8 Vss F16 Vss K16 Vss N47 Vss F18 Vss K18 Vss P12 Datasheet Ballout Definition PCH SFF Ball Name Datasheet PCH SFF Ball Name Ball # Ball # PCH SFF Ball Name Ball # Vss P21 Vss Y10 Vss_NCTF C1 Vss P28 Vss Y12 Vss_NCTF C51 Vss P40 Vss Y14 Vss_NCTF E1 Vss P42 Vss Y16 VssA_DAC AC47 Vss P44 Vss Y2 VssA_LVDS AD36 Vss P46 Vss Y21 WAKE# C7 Vss P48 Vss Y25 XCLK_RCOMP AE49 Vss P50 Vss Y31 XTAL25_IN AD50 Vss P6 Vss Y33 XTAL25_OUT AD48 Vss P8 Vss Y34 Vss T12 Vss Y4 Vss T14 Vss Y40 Vss T16 Vss Y42 Vss T2 Vss Y44 Vss T22 Vss Y46 Vss T28 Vss Y6 Vss T30 Vss Y8 Vss T31 Vss AU11 Vss T33 Vss AM36 Vss T38 Vss AH12 Vss T40 Vss T27 Vss T42 Vss_NCTF A3 Vss T44 Vss_NCTF A49 Vss T46 Vss_NCTF A5 Vss T6 Vss_NCTF A50 Vss T8 Vss_NCTF A51 Vss V12 Vss_NCTF B2 Vss V18 Vss_NCTF B50 Vss V19 Vss_NCTF B51 Vss V25 Vss_NCTF BC1 Vss V31 Vss_NCTF BC51 Vss V33 Vss_NCTF BD1 Vss V38 Vss_NCTF BD2 Vss V40 Vss_NCTF BD50 Vss V42 Vss_NCTF BD51 Vss V44 Vss_NCTF BE1 Vss V46 Vss_NCTF BE2 Vss V48 Vss_NCTF BE3 Vss V50 Vss_NCTF BE49 Vss V6 Vss_NCTF BE50 Vss V8 Vss_NCTF BE51 317 Ballout Definition 318 Datasheet Package Information 7 Package Information 7.1 PCH package (Desktop Only) * FCBGA package * Package size: 27 mm x 27 mm * Ball Count: 951 * Ball pitch: 0.7 mm The Desktop package information is shown in Figure 7-1. Note: Datasheet All dimensions, unless otherwise specified, are in millimeters. 319 Package Information Figure 7-1. 320 PCH Desktop Package Drawing Datasheet Package Information 7.2 PCH package (Mobile Only) * FCBGA package * Package size: 27 mm x 25 mm * Ball Count: 1071 * Ball pitch: 0.6 mm The PCH Mobile package information is shown in Figure 7-2. Note: Datasheet All dimensions, unless otherwise specified, are in millimeters. 321 Package Information Figure 7-2. 322 PCH B-Step Mobile Package Drawing Datasheet Package Information 7.3 PCH package (Mobile SFF Only) * FCBGA package * Package size: 22 mm x 20 mm * Ball Count: 1045 Ball pitch: 0.593 mm The PCH SFF Mobile package information is shown in Figure 7-3. Note: Datasheet All dimensions, unless otherwise specified, are in millimeters. 323 Package Information Figure 7-3. PCH Mobile SFF Package Drawing 324 Datasheet Electrical Characteristics 8 Electrical Characteristics This chapter contains the DC and AC characteristics for the PCH. AC timing diagrams are included. 8.1 Thermal Specifications 8.1.1 Desktop Storage Specifications and Thermal Design Power (TDP) For desktop thermal information, see the Intel(R) 5 Series Express Chipset Platform Controller Hub (PCH) Thermal Mechanical Specifications and Design Guidelines (TMS), Document # 407051. 8.1.2 Mobile Storage Specifications and Thermal Design Power (TDP) Table 8-1. Storage Conditions Parameter Description Min Max Notes TABSOLUTE STORAGE The non-operating device storage temperature. Damage (latent or otherwise) may occur when exceeded for any length of time -55 C 125 C 1,2,3 TSUSTAINED STORAGE The ambient storage temperature (in shipping media) for a sustained period of time. -5 C 40 C 4,5 RHSUSTAINED STORAGE The maximum device storage relative humidity for a sustained period of time. TIME A prolonged or extended period of time; typically associated with customer shelf life. SUSTAINED STORAGE Tj (Mobile only) Mobile Thermal Junction Operating Temperature limits 60% @ 24 C 5,6 0 Months 6 Months 6 0 C 108 C 7 NOTES: 1. Refers to a component device that is not assembled in a board or socket and is not electrically connected to a voltage reference or I/O signal. 2. Specified temperatures are not to exceed values based on data collected. Exceptions for surface mount reflow are specified by the applicable JEDEC standard. Non-adherence may affect PCH reliability. 3. Tabsolute storage applies to the unassembled component only and does not apply to the shipping media, moisture barrier bags, or dessicant. 4. Intel branded products are specified and certified to meet the following temperature and humidity limits that are given as an example only (Non-Operating Temperature Limit: -40 C to 70 C and Humidity: 50% to 90%, non-condensing with a maximum wet bulb of 28 C.) Post board attach storage temperature limits are not specified for non-Intel branded boards. 5. The JEDEC J-JSTD-020 moisture level rating and associated handling practices apply to all moisture sensitive devices removed from the moisture barrier bag. 6. Nominal temperature and humidity conditions and durations are given and tested within the constraints imposed by TSUSTAINED storage and customer shelf life in applicable Intel boxes and bags. 7. The thermal solution needs to ensure that the temperature does not exceed the maximum junction temperature (Tj,max) limit. See the Embedded Controller Support Provided by Ibex Peak(IBX) - Technical Update - Rev. 1.5 Document number 390730 for details on how measure Tj. Datasheet 325 Electrical Characteristics Table 8-2. Mobile Thermal Design Power SKU Thermal Design Power (TDP) Notes QM57 3.5 W 1 HM57 3.5 W 1 HM55 3.5 W 1 PM55 3.5 W 1 QS57 3.4 W 1 NOTES: 1. For usage configurations please see the Mobile Ibex Peak Platform Controller Hub (PCH) Thermal Design Power (TDP) and Scenario Guidance Document # 427704. 8.2 Absolute Maximum and Minimum Ratings Table 8-3 specifies absolute maximum and minimum ratings. At conditions outside functional operation condition limits, but within absolute maximum and minimum ratings, neither functionality nor long-term reliability can be expected. If a device is returned to conditions within functional operation limits after having been subjected to conditions outside these limits (but within the absolute maximum and minimum ratings) the device may be functional, but with its lifetime degraded depending on exposure to conditions exceeding the functional operation condition limits. At conditions exceeding absolute maximum and minimum ratings, neither functionality nor long-term reliability can be expected. Moreover, if a device is subjected to these conditions for any length of time, it will either not function or its reliability will be severely degraded when returned to conditions within the functional operating condition limits. Although the PCH/ICHx contains protective circuitry to resist damage from Electro Static Discharge (ESD), precautions should always be taken to avoid high static voltages or electric fields. Table 8-3. PCH Absolute Maximum Ratings Parameter Voltage on any 5 V Tolerant Pin with respect to Ground (V5REF = 5 V) -0.5 to V5REF + 0.5 V Voltage on any 3.3 V Pin with respect to Ground -0.5 to Vcc3_3 + 0.4 V Voltage on any 1.8 V Tolerant Pin with respect to Ground -0.5 to VccVRM + 0.5 V Voltage on any 1.05 V Tolerant Pin with respect to Ground -0.5 to VccIO + 0.5 V 1.05 V Supply Voltage with respect to VSS -0.5 to 1.3 V 1.8 V Supply Voltage with respect to VSS -0.5 to 3.7 V 3.3 V Supply Voltage with respect to VSS -0.5 to 3.7 V 5.0 V Supply Voltage with respect to VSS -0.5 to 5.5 V V_CPU_IO Supply Voltage with respect to VSS 1.8 V Supply Voltage for the analog PLL with respect to VSS 326 Maximum Limits -0.5 to 1.3 V -0.5 to 1.98 V Datasheet Electrical Characteristics 8.3 Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Power Supply range Table 8-4. PCH Power Supply Range 8.4 Power Supply Minimum Nominal Maximum 1.05 V 1.00 V 1.05 V 1.10 V 1.5 V 1.43 V 1.50 V 1.58 V 1.8 V 1.71 V 1.80 V 1.89 V 3.3 V 3.14 V 3.30 V 3.47 V 5V 4.75 V 5.00 V 5.25 V General DC Characteristics Note that ICC values in Table 8-5 and Table 8-6 are all pre-silicon estimates. Values will be updated when characterized on real silicon is completed. Table 8-5. Measured ICC (Desktop Only) Voltage (V) S0 Iccmax Current Integrated Graphics (A) S0 Iccmax Current External Graphics (A) S0 Idle Current Integrated Graphics (A) S0 Idle Current External Graphics (A) Sx Iccmax Current (A) Sx Idle Current (A) G3 1.1/ 1.05 .001 .001 .001 .001 -- -- -- V5REF 5 .001 .001 .001 .001 -- -- -- V5REF_Sus 5 .001 .001 .001 .001 .001 -- -- Vcc3_3 3.3 .305 .305 .035 .035 -- -- -- VccADAC 3.3 .075 .0011 .0011 .0011 -- -- -- VccADPLLA 1.05 .1100 .0440 .1034 .022 -- -- -- VccADPLLB 1.05 .1100 .0440 .022 .022 -- -- -- VccCore 1.05 1.76 1.584 .528 .44 -- -- -- VccDMI 1.1 .063 .063 .0011 .0011 -- -- -- VccIO 1.05 3.482 2.862 .9504 .519 -- -- -- VccLAN 1.05 .253 .253 .091 .091 .165 -- -- VccME Voltage Rail V_CPU_IO 1.05 1.41 1.41 .493 .493 1.22 .0044 -- VccME3_3 3.3 .0308 .0308 .0022 .0022 .0154 .0022 -- VccRTC 3.3 N/A N/A N/A N/A N/A N/A See notes 1, 2 VccSus3_3 3.3 .0924 .0924 .0154 .0154 .1551 .0330 -- VccSusHDA 3.3 .0088 .0088 .001 .001 .001 .001 -- VccVRM 1.8 .169 .123 .129 .052 -- -- -- 6 uA NOTES: 1. G3 state shown to provide an estimate of battery life. 2. Icc (RTC) data is taken with VccRTC at 3.0 V while the system in a mechanical off (G3) state at room temperature. Datasheet 327 Electrical Characteristics Table 8-6. Voltage Rail V_CPU_IO V5REF V5REF_Sus Measured ICC (Mobile Only) Voltage (V) S0 Iccmax Current Integrated Graphics (A) S0 Iccmax Current External Graphics (A) S0 Idle Current Integrated Graphics (A) S0 Idle Current External Graphics (A) 1.1/ 1.05 .001 .001 .001 .001 -- 5 .001 .001 .001 .001 -- Sx Iccmax Current (A) Sx Idle Current (A) 5 .001 .001 .001 .001 Vcc3_3 3.3 .305 .305 .0176 .0176 -- VccADAC 3.3 .075 .0011 .0011 .0011 -- 1.05 .088 .0176 .0825 .0044 -- VccADPLLA .001 G3 -- VccADPLLB 1.05 .088 .0176 .0044 .0044 -- VccCore 1.05 1.43 1.254 .3685 .2805 -- VccDMI 1.1 .055 .055 .0011 .0011 -- 1.05 3.23 2.628 .463 .285 -- VccLAN 1.05 .220 .220 .066 .066 .132 VccME 1.05 1.2 1.2 .186 .186 .98 .0044 -- VccME3_3 3.3 .031 .031 .0022 .0022 .0154 .0022 -- VccRTC 3.3 N/A N/A N/A N/A N/A N/A See notes 1, 2 VccSus3_3 3.3 .087 .087 .0132 .0132 .133 .0297 -- VccSusHDA 3.3 .0088 .0088 .001 .001 .001 .001 -- VccVRM 1.8 .156 .114 .113 .045 VccALVDS 3.3 .0011 .0011 .0011 .0011 VccTX_LVDS 1.8 .066 .0011 .0198 .0011 VccIO -- 6 uA -- NOTES: 1. G3 state shown to provide an estimate of battery life. 2. Icc (RTC) data is taken with VccRTC at 3.0 V while the system in a mechanical off (G3) state at room temperature. 328 Datasheet Electrical Characteristics Table 8-7. Voltage Rail V_CPU_IO V5REF V5REF_Sus Measured ICC (SFF Only) Voltage (V) S0 Iccmax Current Integrated Graphics (A) S0 Iccmax Current External Graphics (A) S0 Idle Current Integrated Graphics (A) S0 Idle Current External Graphics (A) 1.1/ 1.05 .001 .001 .001 .001 -- 5 .001 .001 .001 .001 -- Sx Iccmax Current (A) Sx Idle Current (A) 5 .001 .001 .001 .001 Vcc3_3 3.3 .305 .305 .0176 .0176 -- VccADAC 3.3 .075 .0011 .0011 .0011 -- 1.05 .078 .011 .081 .0044 -- VccADPLLA .001 G3 -- VccADPLLB 1.05 .078 .011 .0044 .0044 -- VccCore 1.05 1.32 1.14 .352 .264 -- VccDMI 1.1 .055 .055 .0011 .0011 -- VccIO 1.05 3.15 2.56 .437 .252 -- VccLAN 1.05 .176 .176 .057 .057 .11 VccME 1.05 .892 .892 .169 .169 .826 .0044 -- VccME3_3 3.3 .031 .031 .0022 .0022 .0154 .0022 -- VccpNAND 1.8 .0055 .0055 .0022 .0022 VccRTC 3.3 N/A N/A N/A N/A N/A N/A See notes 1, 2 VccSus3_3 3.3 .087 .087 .0132 .0132 .122 .0286 -- VccSusHDA 3.3 .0088 .0088 .001 .001 .001 .001 VccVRM 1.8 .156 .114 .113 .045 VccALVDS 3.3 .0011 .0011 .0011 .0011 VccTX_LVDS 1.8 .066 .0011 .0198 .0011 -- -- 6 uA -- -- NOTES: 1. G3 state shown to provide an estimate of battery life. 2. Icc (RTC) data is taken with VccRTC at 3.0 V while the system in a mechanical off (G3) state at room temperature. Datasheet 329 Electrical Characteristics Table 8-8. DC Characteristic Input Signal Association (Sheet 1 of 2) Symbol VIH1/VIL1 (5V Tolerant) VIH2/VIL2 Associated Signals PCI Signals: AD[31:0], C/BE[3:0]#, DEVSEL#, FRAME#, IRDY#, PAR, PERR#, PLOCK#, REQ[3:0]#, SERR#, STOP#, TRDY# Interrupt Signals: PIRQ[D:A]#, PIRQ[H:E]#, SERIRQ GPIO Signals: GPIO[54, 52, 50, 5:2] Digital Display Port Hot Plug Detect: DDPB_HPD, DDPC_HPD, DDPD_HPD Clock Signals: REFCLK14IN VIH3/VIL3 Power Management Signals: PWRBTN#, RI#, SYS_RESET#, WAKE#, CLKRUN# (Mobile Only) Mobile Only: AC_PRESENT GPIO Signals: GPIO[67:61, 57, 48, 39, 38, 34, 32, 31, 30, 29, 24, 22, 17, 7, 6, 1] Intel(R) Quiet System Technology Signals: TACH[3:0] Strap Signals:, SATALED# (Strap purposes only) Clock Signals: CLKIN_PCILOOPBACK Processor Signals:A20GATE PCI Signals: PME# Interrupt Signals: SERIRQ Integrated Clock Signals: PEG_A_CLKRQ#, PEG_B_CLKRQ#, PCIECLKRQ[7:0]# Power Management Signals: BATLOW# VIH4/VIL4 SATA Signals: SATA[5:0]GP SPI Signals: SPI_MISO Strap Signals: SPKR, SPI_MOSI, GNT[3:0]#, (Strap purposes only) LPC/Firmware Hub Signals: LAD[3:0]/FWH[3:0], LDRQ0#, LDRQ1#, GPIO Signals: GPIO[73, 72, 59, 56, 55, 53, 51, 49, 47:40, 37, 36, 35, 33, 28, 27, 26, 25, 23,21, 20, 19, 18, 16, 15, 14, 12, 10, 9, 8, 0] Desktop Only: GPIO[72, 12] USB Signals: OC[7:0]# SMBus Signals: SMBCLK, SMBDATA, SMBALERT# System Management Signals: SML[1:0]CLK(1), SML[1:0]DATA(1) VIH5/VIL5 GPIO Signals: GPIO[75, 74, 60, 58, 11] Processor Interface: RCIN# Power Management Signals: SYS_PWROK, LAN_RST#, MEPWROK VIH6/VIL6 VIH7/VIL7 VIMIN8/VIMAX8 VIH9/VIL9 330 JTAG Signals: JTAG_TDI, JTAG_TMS, TRST#, JTAG_TCK Processor Signals: THRMTRIP# PCI Express* Data RX Signals: PER[p,n][8:1] Real Time Clock Signals: RTCX1 VIMIN10 -Gen1i/ VIMAX10-Gen1i SATA Signals: SATA[5:0]RX[P,N] (1.5 Gb/s internal SATA) VIMIN10 -Gen1m/ VIMAX10-Gen1m SATA Signals: SATA[5:0]RX[P,N] (1.5 Gb/s external SATA) VIMIN10 -Gen2i/ VIMAX10-Gen2i SATA Signals: SATA[5:0]RX[P,N] (3.0 Gb/s internal SATA) VIMIN10 -Gen2m/ VIMAX10-Gen2m SATA Signals: SATA[5:0]RX[P,N] (3.0 Gb/s external SATA) Datasheet Electrical Characteristics Table 8-8. DC Characteristic Input Signal Association (Sheet 2 of 2) Symbol Associated Signals Intel High Definition Audio Signals: HDA_SDIN[3:0] (3.3V Mode) Strap Signals: HDA_SDOUT, HDA_SYNC (Strap purposes only) VIH11/VIL11 GPIO Signals: GPIO13 NOTE: See VIL_HDA/VIH_HDA for High Definition Audio Low Voltage Mode VIH12 (Absolute Maximum) / VIL12 (Absolute Minimum) / Vclk_in_cross(abs) VIH13/VIL13 Clock Signals: CLKIN_BCLK_[P,N], CLKIN_DMI_[P,N], CLKIN_DOT96[P,N], CLKIN_SATA_[P,N] / CKSSCD_[P,N] Miscellaneous Signals: RTCRST# Power Management Signals: PWROK, RSMRST# VIH14/VIL14 System Management Signals: INTRUDER# Miscellaneous Signals: INTVRMEN, SRTCRST# VIH15/VIL15 Digital Display Control Signals: CRT_DDC_CLK, CRT_DDC_DATA SDVO_CTRLCLK, SDVO_CTRLDATA, DDPC_CTRLCLK, DDPC_CTRLDATA, DDPD_CTRLCLK, DDPD_CTRLDATA Mobile only: L_BKLTEN, L_BKLTCTL, L_DDC_CLK, L_DDC_DATA VIH_CL/VIL_CL VDI / VCM / VSE (5V Tolerant) Controller Link: CL_CLK1, CL_DATA1 USB Signals: USBP[13:0][P,N] (Low-speed and Full-speed) VHSSQ / VHSDSC / VHSCM (5V Tolerant) USB Signals: USBP[13:0][P,N] (in High-speed Mode) Intel(R) High Definition Audio Signals: HDA_SDIN[3:0] VIH_HDA / VIL_HDA Strap Signals: HDA_SDOUT, HDA_SYNC (Strap purposes only) NOTE: Only applies when running in Low Voltage Mode (1.5 V) VIH_SST/VIL_SST Intel(R) Quiet System Technology and Thermal Reporting Signals: SST VIH_PECI/ VIL_PECI Intel(R) Quiet System Technology and Thermal Reporting Signals: PECI VIH_FDI/VIL_FDI VAUX-Diff-P-P VIH_XTAL25/ VIL_XTAL25 Intel(R) Flexible Display Interface Signals: FDI_RX[P,N][7:0] Digital Display Port Aux Signal (Receiving Side): DDP[D:B]_AUX[P,N] 25 MHz Crystal Input: (Used in Display Clock Integration Mode) XTAL25_IN NOTES: 1. VDI = | USBPx[P] - USBPx[N]. 2. Includes VDI range. 3. Applies to Low-Speed/High-Speed USB. 4. PCI Express mVdiff p-p = 2*|PETp[x] - PETn[x]|. 5. SATA Vdiff, RX (VIMAX10/MIN10) is measured at the SATA connector on the receiver side (generally, the motherboard connector), where SATA mVdiff p-p = 2*|SATA[x]RXP - SATA[x]RXN|. 6. VccRTC is the voltage applied to the VccRTC well of the PCH. When the system is in a G3 state, this is generally supplied by the coin cell battery, but for S5 and greater, this is generally VccSus3_3. 7. CL_Vref = 0.27 CL_VREF1 applies to Mobile configurations. 8. This is an AC characteristic that represents transient values for these signals. 9. Applies to High-Speed USB 2.0. Datasheet 331 Electrical Characteristics Table 8-9. Symbol DC Input Characteristics (Sheet 1 of 3) Parameter Min Max Unit Notes VIL1 Input Low Voltage -0.5 0.3(3.3V) V Note 10 VIH1 Input High Voltage 0.5(3.3V) V5REF + 0.5 V Note 10 VIL2 Input Low Voltage -- .8 V VIH2 Input High Voltage 2 -- V VIL3 Input Low Voltage -0.5 0.8 V VIH3 Input High Voltage 2.0 3.3 V + 0.5 V Note 10 VIL4 Input Low Voltage -0.5 0.3(3.3 V) V Note 10 VIH4 Input High Voltage 0.5(3.3 V) 3.3 V + 0.5 V Note 10 VIL5 Input Low Voltage -0.5 0.8 V VIH5 Input High Voltage 2.1 3.3 V + 0.5 V Note 10 VIL6 Input Low Voltage -0.5 0.35 V Note 11 VIH6 Input High Voltage 0.75 1.05 V + 0.5 V Note 11 VIL7 Input Low Voltage 0 0.51(V_CPU_IO) V VIH7 Input High Voltage 0.81(V_CPU_IO) V_CPU_IO V VIMIN8 Minimum Input Voltage 175 -- mVdiff p-p Note 4 VIMAX8 Maximum Input Voltage -- 1200 mVdiff p-p Note 4 VIL9 Input Low Voltage -0.5 0.10 V VIH9 Input High Voltage 0.50 1.2 V VIMIN10Gen1i Minimum Input Voltage - 1.5 Gb/s internal SATA 325 -- mVdiff p-p Note 5 VIMAX10Gen1i Maximum Input Voltage - 1.5 Gb/s internal SATA -- 600 mVdiff p-p Note 5 VIMIN10Gen1m Minimum Input Voltage - 1.5 Gb/s eSATA 240 -- mVdiff p-p Note 5 VIMAX10Gen1m Maximum Input Voltage - 1.5 Gb/s eSATA -- 600 mVdiff p-p Note 5 VIMIN10Gen2i Minimum Input Voltage - 3.0 Gb/s internal SATA 275 -- mVdiff p-p Note 5 VIMAX10Gen2i Maximum Input Voltage - 3.0 Gb/s internal SATA -- 750 mVdiff p-p Note 5 VIMIN10Gen2m Minimum Input Voltage - 3.0 Gb/s eSATA 240 -- mVdiff p-p Note 5 VIMAX10Gen2m Maximum Input Voltage - 3.0 Gb/s eSATA -- 750 mVdiff p-p Note 5 -0.5 0.35(3.3 V) V Note 10 VIL11 332 Input Low Voltage Datasheet Electrical Characteristics Table 8-9. Symbol DC Input Characteristics (Sheet 2 of 3) Parameter Min Max Unit Notes Note 10 VIH11 Input High Voltage 0.65(3.3 V) 3.3 + 0.5V V VIL12 (Absolute Minimum) Input Low Voltage -0.3 -- V VIH12 (Absolute Maximum) Input High Voltage -- 1.150 V VIL13 Input Low Voltage -0.5 0.78 V VIH13 Input High Voltage 2.3 VccRTC + 0.5 V VIL14 Input Low Voltage -0.5 0.78 V VIH14 Input High Voltage 2.0 VccRTC + 0.5 V Note 6 VIL15 Input Low Voltage -0.5 0.3*(3.3 V) V Note 10 VIH15 Input High Voltage 0.7*(3.3 V) 3.3 V + 0.5 V Note 10 VIL_CL Input Low Voltage -0.3 (CL_VREF - 0.075) V Note 7 VIH_CL Input High Voltage (CL_VREF + 0.075) 1.2 V Note 7 0.250 0.550 V Vclk_in_cros s(abs) Absolute Crossing Point Note 6 VDI Differential Input Sensitivity 0.2 -- V Note 1,3 VCM Differential Common Mode Range 0.8 2.5 V Note 2,3 VSE Single-Ended Receiver Threshold 0.8 2.0 V Note 3 VHSSQ HS Squelch Detection Threshold 100 150 mV Note 9 HS Disconnect Detection Threshold 525 625 mV Note 9 HS Data Signaling Common Mode Voltage Range -50 500 mV Note 9 VHSDSC VHSCM VIL_HDA Input Low Voltage 0 0.4(Vcc_HDA) V VIH_HDA Input High Voltage 0.6(Vcc_HDA) 1.5 V VIL_SST Input Low Voltage -0.3 0.4 V VIH_SST Input High Voltage 1.1 1.5 V VIL_PECI Input Low Voltage -0.15 0.275(V_CPU_IO) V VIH_PECI Input High Voltage 0.725(V_CPU_IO) V_CPU_IO + 0.15 V VIL_FDI Minimum Input Voltage 175 -- mVdiff p-p VIH_FDI Maximum Input Voltage -- 1000 mVdiff p-p Datasheet 333 Electrical Characteristics Table 8-9. DC Input Characteristics (Sheet 3 of 3) Symbol Parameter Min Max Unit Notes VAUX-Diff-PP Digital Display Port Auxiliary Signal peak-to-peak voltage at receiving device 0.32 1.36 Vdiffp -p VIL_XTAL25 Minimum Input Voltage -0.15 0.15 V 12 VIH_XTAL25 Maximum Input Voltage 0.7 1.1 V 12 NOTES: 1. VDI = | USBPx[P] - USBPx[N]. 2. Includes VDI range. 3. Applies to Low-Speed/Full-Speed USB. 4. PCI Express mVdiff p-p = 2*|PETp[x] - PETn[x]|. 5. SATA Vdiff, RX (VIMAX10/MIN10) is measured at the SATA connector on the receiver side (generally, the motherboard connector), where SATA mVdiff p-p = 2*|SATA[x]RXP - SATA[x]RXN|. 6. VccRTC is the voltage applied to the VccRTC well of the PCH. When the system is in a G3 state, this is generally supplied by the coin cell battery, but for S5 and greater, this is generally VccSus3_3. 7. CL_Vref = 0.27 (VccCL1_5). CL_VREF0 applies to Desktop configurations. CL_VREF1 applies to Mobile configurations. 8. This is an AC Characteristic that represents transient values for these signals. 9. Applies to High-Speed USB 2.0. 10. 3.3 V refers to VccSus3_3 for signals in the suspend well and to Vcc3_3 for signals in the core well and to VccME3_3 for signals in the ME well. See Table 3-2, or Table 3-3 for signal and power well association. 11. 1.1 V refers to VccIO or VccCore for signals in the core well and to VccME for signals in the ME well. See Table 3-2 or Table 3-3 for signal and power well association. 12. Specification applies when 25 MHz crystal is used on the platform. XTAL25_IN is terminated low when crystal input is not used. Table 8-10. DC Characteristic Output Signal Association (Sheet 1 of 3) Symbol VOH1/VOL1 Associated Signals Processor Signal: PMSYNCH, PROCPWRGD LPC/Firmware Hub Signals: LAD[3:0]/FWH[3:0], LFRAME#/FWH[4], INIT3_3V# Power Management Signal: (Mobile Only) LAN_PHY_PWR_CTRL Intel(R) High Definition Audio Signals: HDA_DOCK_EN# (Mobile Only), HDA_DOCK_RST# (Mobile Only) VOH2/VOL2 PCI Signals: AD[31:0], C/BE[3:0], DEVSEL#, FRAME#, IRDY#, PAR, PCIRST#, GNT[3:0]#, PME#(1) Interrupt Signals: PIRQ[D:A], PIRQ[H:E]#(1) GPIO Signals: GPIO[73, 72, 59, 56, 55:50, 49, 47:44 43:40, 37, 36, 35, 33, 28, 27, 26, 25, 23, 21, 20, 19, 18, 16, 15, 14, 13, 12, 10, 9, 8, 5:2, 0] SPI Signals: SPI_CS0#, SPI_CS1#, SPI_MOSI, SPI_CLK Miscellaneous Signals: SPKR SMBus Signals: SMBCLK(1), SMBDATA(1) VOH3/VOL3 System Management Signals: SML[1:0]CLK(1), SML[1:0]DATA(1), SML0ALERT#, SML1ALERT# GPIO Signals: GPIO[75, 74, 60, 58, 11] 334 Datasheet Electrical Characteristics Table 8-10. DC Characteristic Output Signal Association (Sheet 2 of 3) Symbol Associated Signals Power Management Signals: SLP_S3#, SLP_S4#, SLP_S5#, SLP_M#, SLP_LAN#, SUSCLK, SUS_STAT#, SUS_PWR_DN_ACK, CLKRUN# (Mobile Only) STP_PCI# VOH4/VOL4 SATA Signals: SATALED#, SCLOCK, SLOAD, SDATAOUT0, SDATAOUT1 GPIO Signals: GPIO[63:61, 57, 48, 39, 38, 34, 32, 31, 30, 29, 24, 22, 17, 7, 6, 1] Controller Link: CL_RST1# Interrupt Signals: SERIRQ VOH5/VOL5 VOL6/VOL6 (Fast Mode) USB Signals: USBP[13:0][P,N] in Low-speed and Full-speed Modes Digital Display Control Signals: CRT_DDC_CLK, CRT_DDC_DATA SDVO_CTRLCLK, SDVO_CTRLDATA, DDPC_CTRLCLK, DDPC_CTRLDATA, DDPD_CTRLCLK, DDPD_CTRLDATA Mobile only: L_CTRL_CLK, L_CTRL_DATA, L_VDD_EN, L_BKLTEN, L_BKLTCTL, L_DDC_CLK, L_DDC_DATA, NOTE: Fast Mode is not applicable to L_VDD_EN VOH6 L_VDD_EN, L_BKLTEN, L_BKLTCTL VOMIN7 Gen1i,m/ VOMAX7-Gen1i,m SATA Signals: SATA[5:0]RX[P,N] (1.5 Gb/s Internal and External SATA) VOMIN7 Gen2i,m/ VOMAX7-Gen2i,m SATA Signals: SATA[5:0]RX[P,N] (3.0 Gb/s Internal and External SATA) PCI Express* Data TX Signals: PET[p,n][8:1] VOMIN8/VOMAX8 Digital Display Ports when configured as HDMI/DVI: DDPB_[3:0][P,N], DDPC_[3:0][P,N], DDPD_[3:0][P,N] SDVO Signals: SDVO_INT[P,N], SDVO_TVCLKIN[P,N], SDVO_STALL[P,N] VOH9/VOL9 Power Management Signal: PLTRST# VHSOI VHSOH VHSOL USB Signals: USBP[13:0][P:N] in High-speed Mode VCHIRPJ VCHIRPK VOH_HDA/ VOL_HDA Intel(R) High Definition Audio Signals: HDA_RST#, HDA_SDOUT, HDA_SYNC VOL_JTAG JTAG Signals: JTAG_TDO VOH_PCICLK/ VOL_PCICLK VOL_SGPIO VOH_PWM/ VOL_PWM Datasheet Single Ended Clock Interface Output Signals: CLKOUT_PCI[4:0], CLKOUTFLEX[3:0] GPIO Signals: [67:64] SGPIO Signals: SCLOCK, SLOAD, SDATAOUT0, SDATAOUT1 GPIO[48, 39, 38, 22] Intel(R) Quiet System Technology Signals: PWM[3:0] 335 Electrical Characteristics Table 8-10. DC Characteristic Output Signal Association (Sheet 3 of 3) Symbol Associated Signals VOH_CRT/ VOL_CRT Display Signals: CRT_HSYNC, CRT_VSYNC VOH_CL1/ VOL_CL1 Controller Link Signals: Mobile Only: CL_CLK1, CL_DATA1 VOH_SST/ VOL_SST SST signal: SST VOH_PECI/ VOL_PECI PECI signal: PECI VAUX-Diff-P-P VOH_FDI// VOL_FDI Digital Display Port Aux Signal (Transmit Side): DDP[D:B]_AUX[P,N] Intel(R) FDI signals:FDI_FSYNC_[1:0],FDI_LSYNC_[1:0],FDI_INT NOTE: 1. These signals are open-drain. 336 Datasheet Electrical Characteristics Table 8-11. DC Output Characteristics (Sheet 1 of 2) Symbol Min Max Unit IOL / IOH Output Low Voltage -- 0.255 V 3 mA VOH1 Output High Voltage V_CPU_IO - 0.3 V_CPU_IO V -3 mA VOL2 Output Low Voltage -- 0.1(3.3 V) V 1.5 mA Note 7 VOH2 Output High Voltage 0.9(3.3 V) 3.3 V -0.5 mA Note 7 VOL3 Output Low Voltage 0 0.4 V 4 mA VOH3 Output High Voltage 3.3 V - 0.5 -- V -2 mA VOL4 Output Low Voltage -- 0.4 V 6 mA VOH4 Output High Voltage 3.3 V- 0.5 3.3 V V -2 mA VOL5 Output Low Voltage -- 0.4 V 5 mA VOH5 Output High Voltage 3.3 V - 0.5 -- V -2 mA Note 7 VOL6 Output Low Voltage 0 400 mV 3 mA Note 2 VOL6 (Fast Mode) Output Low Voltage 0 600 mV 6 mA Note 2 Output High Voltage 3.3 V - 0.5 3.3 V -2 mA Note 7, 2 Note 3 VOL1 VOH6 Parameter Notes Note 1, 7 Note 7 VOMIN7Gen1i,m Minimum Output Voltage 400 -- mVdif fp-p VOMAX7Gen1i,m Maximum Output Voltage -- 600 mVdif fp-p Note 3 VOMIN7Gen2i,m Minimum Output Voltage 400 -- mVdif fp-p Note 3 VOMAX7Gen2i,m Maximum Output Voltage -- 700 mVdif fp-p Note 3 VOMIN8 Output Low Voltage 400 -- mVdif fp-p Note 2 VOMAX8 Output High Voltage -- 600 mVdif fp-p Note 2 VOL9 Output Low Voltage -- 0.1(3.3 V) V 1.5 mA Note 7 0.9(3.3 V) 3.3 V -2.0 mA Note 7 -10.0 10.0 mV VOH9 Output High Voltage VHSOI HS Idle Level VHSOH HS Data Signaling High 360 440 mV VHSOL HS Data Signaling Low -10.0 10.0 mV VCHIRPJ Chirp J Level 700 1100 mV VCHIRPK Chirp K Level -900 -500 mV VOL_HDA Output Low Voltage -- 0.1(VccSusHDA V) V 1.5 mA 0.9(VccSusHDA V) -- V -0.5 mA V 8 mA VOH_HDA Output High Voltage VOL_PWM Output Low Voltage -- 0.4 VOH_PWM Output High Voltage -- -- VOL_SGPIO Output Low Voltage -- 0.4 V VOL_CRT Output Low Voltage -- 0.5 V VOH_CRT Output High Voltage 2.4 -- V 8 mA VOL_CL1 Output Low Voltage -- 0.15 V 1 mA Datasheet Note 1 8 mA 337 Electrical Characteristics Table 8-11. DC Output Characteristics (Sheet 2 of 2) Symbol Parameter Min Max Unit IOL / IOH VOH_CL1 Output High Voltage .61 .98 V VOL_SST Output Low Voltage 0 0.3 V VOH_SST Output High Voltage 1.1 1.5 V -6 mA VOL_PECI Output Low Voltage -- 0.25(V_CPU_IO) V 0.5 mA VOH_PECI Output High Voltage 0.75(V_CPU_IO) V_CPU_IO VOL_HDA Output Low Voltage -- 0.1(VccHDA) V 1.5 mA 1.5 mA Notes 0.5 mA -6 mA VOL_JTAG Output Low Voltage 0 0.1(1.05 V) V V_CLKOUT_sw ing Differential Output Swing 300 -- mV V_CLKOUT_cr oss Clock Cross-Over point 300 550 mV V_CLKOUTMIN Min output Voltage -0.3 -- V V_CLKOUTMA X Max output Voltage 1.15 V V VOL_PCICLK Output Low Voltage -- 0.4 V -1 mA VOH_PCICLK Output High Voltage 2.4 -- V 1 mA VAUX-Diff-P-P Digital Display Port Auxiliary Signal peak-to-peak voltage at transmitting device 0.39 1.38 Vdiffp -p VOL_FDI Output Low Voltage -.1 0.2(3.3V) V 4.1 mA Note 7 VOH_FDI Output High Voltage .8(3.3V) 1.2 V 4.1 mA Note 7 NOTES: 1. The SERR#, PIRQ[H:A], SMBDATA, SMBCLK, SML[1:0]CLK, SML[1:0]DATA, SML[1:0]'ALERT# and PWM[3:0] signal has an open-drain driver and SATALED# has an open-collector driver, and the VOH / IOH specification does not apply. This signal must have external pull up resistor. 2. PCI Express mVdiff p-p = 2*|PETp[x] - PETn[x]|. 3. SATA Vdiff, tx (VOMIN7/VOMAX7) is measured at the SATA connector on the transmit side (generally, the motherboard connector), where SATA mVdiff p-p = 2*|SATA[x]TXP - SATA[x]TXN|. 4. Maximum Iol for PROCPWRGD is 12mA for short durations (<500 mS per 1.5 s) and 9 mA for long durations. 5. For INIT3_3V only, for low current devices, the following applies: VOL5 Max is 0.15 V at an IOL5 of 2 mA. 6. 3.3 V refers to VccSus3_3 for signals in the suspend well, to Vcc3_3 for signals in the core well and to VccME3_3 for those signals in the ME well. See Table 3-2 or Table 3-3 for signal and power well association. 7. 3.3 V refers to VccSus3_3 for signals in the suspend well and to Vcc3_3 for signals in the core well and to VccME3_3 for signals in the ME well. See Table 3-2, or Table 3-3 for signal and power well association. 338 Datasheet Electrical Characteristics Table 8-12. Other DC Characteristics Symbol Parameter Min Nom Max Unit Notes V_CPU_IO Processor I/F .998 1.05 1.10 V 1 V_CPU_IO Processor I/F 1.05 1.1 1.16 V 1 V5REF PCH Core Well Reference Voltage 4.75 5 5.25 V 1 Vcc3_3 I/O Buffer Voltage 3.14 3.3 3.47 V 1 VccVRM 1.8 V Internal PLL and VRMs (1.8 V for Desktop and Mobile) 1.746 1.8 1.854 V 1,3 1 V5REF_Sus Suspend Well Reference Voltage 4.75 5 5.25 V VccSus3_3 Suspend Well I/O Buffer Voltage 3.14 3.3 3.47 V 1 VccCore Internal Logic Voltage .998 1.05 1.10 V 1 VccIO Vcc_DMI Core Well I/O buffers .998 1.05 1.10 V 1 DMI Buffer Voltage .998 1.05 1.10 V LAN Controller Voltage .998 1.05 1.10 V 1 3.14 3.3 3.47 V 1 .998 1.05 1.10 V 1 VccLAN 3.3V Supply for Intel(R) Management Engine VccME3_3 (R) 1.05 V Supply for Intel Engine VccME VccRTC (G3-S0) VccSusHDA VccSusHDA (low voltage) Management Battery Voltage 2 -- 3.47 V 1 High Definition Audio Controller Suspend Voltage 3.14 3.3 3.47 V 1 High Definition Audio Controller Low Voltage Mode Suspend Voltage 1.43 1.5 1.58 V 1 VccADPLLA Display PLL A power .998 1.05 1.10 1 VccADPLLB Display PLL B power .998 1.05 1.10 1 VccADAC Display DAC Analog Power. This power is supplied by the core well. 3.14 3.3 3.47 1 VccALVDS Analog power supply for LVDS (Mobile Only) 3.14 3.3 3.47 1 I/O power supply for LVDS. (Mobile Only) 1.71 1.8 1.89 1 VccTX_LVDS ILI1 PCI_3V Hi-Z State Data Line Leakage -10 -- 10 A (0 V < VIN < Vcc3_3) ILI2 PCI_5V Hi-Z State Data Line Leakage -70 -- 70 A Max VIN = 2.7 V Min VIN = 0.5 V ILI3 Input Leakage Current - All Other -10 -- 10 A 2 CIN Input Capacitance - All Other -- -- TBD pF COUT Output Capacitance -- -- TBD pF FC = 1 MHz FC = 1 MHz CI/O I/O Capacitance -- -- 10 pF FC = 1 MHz Typical Value CL XTAL1 6 pF CL XTAL2 6 pF NOTES: 1. The I/O buffer supply voltage is measured at the PCH package pins. The tolerances shown in Table 8-12 are inclusive of all noise from DC up to 20 MHz. In testing, the voltage rails should be measured with a bandwidth limited oscilloscope that has a rolloff of 3 dB/decade above 20 MHz. 2. Includes Single Ended clocks REFCLK14IN, CLKOUTFLEX[3:0] and PCICLKIN. Datasheet 339 Electrical Characteristics 3. 8.5 Includes only DC tolerance. AC tolerance will be 2% and DC tolerance will be 3% in addition to this range. Display DC Characteristics Table 8-13. Signal Groups Signal Group Associated Signals Note LVDSA_DATA[3:0], LVDSA_DATA#[3:0], LVDSA_CLK, LVDS LVDSA_CLK#, LVDSB_DATA[3:0], LVDSB_DATA#[3:0], LVDSB_CLK, LVDSB_CLK# CRT DAC Digital DisplayPort Auxillary CRT_RED, CRT_GREEN, CRT_BLUE, CRT_IRTN, CRT_TVO_IREF DDP[D:B]_AUX[P,N] Table 8-14. CRT DAC Signal Group DC Characteristics: Functional Operating Range (VccADAC = 3.3 V 5%) Parameter Min Nom Max Unit Notes -- 8 -- Bits 1 0.665 0.7 0.77 V 1, 2, 4 white video level voltage -- 0 -- V 1, 3, 4 black video level voltage LSB Current -- 73.2 -- uA 4, 5 Integral Linearity (INL) -1 -- 1 LSB 1, 6 Differential Linearity (DNL) -1 -- 1 LSB 1, 6 Video channel-channel voltage amplitude mismatch -- -- 6 % 7 DAC Resolution Max Luminance (full-scale) Min Luminance Monotonicity Yes NOTES: 1. Measured at each R, G, B termination according to the VESA Test Procedure - Evaluation of Analog Display Graphics Subsystems Proposal (Version 1, Draft 4, December 1, 2000). 2. Max steady-state amplitude. 3. Min steady-state amplitude. 4. Defined for a double 75- ohm termination. 5. Set by external reference resistor value. 6. INL and DNL measured and calculated according to VESA video signal standards. 7. Max full-scale voltage difference among R,G,B outputs (percentage of steady-state fullscale voltage). 340 Datasheet Electrical Characteristics Table 8-15. LVDS Interface: Functional Operating Range (VccALVDS = 3.3 V 5%) Symbol Parameter Min Nom Max Unit VOD Differential Output Voltage 250 350 450 mV VOD Change in VOD between Complementary Output States -- -- 50 mV VOS Offset Voltage 1.125 1.25 1.375 V VOS Change in VOS between Complementary Output States -- -- 50 mV IOs Output Short Circuit Current -- -3.5 -10 mA IOZ Output TRI-STATE Current -- 1 10 uA Table 8-16. Display Port Auxiliary Signal Group DC Characteristics Symbol Vaux-diff-p-p Datasheet Parameter Min Nom Max Unit Aux peak-to-peak voltage at a transmitting devices 0.39 -- 1.38 V Aux peak-to-peak voltage at a receiving devices 0.32 -- 1.36 V Vaux-term-R AUX CH termination DC resistance -- 100 -- V-aux-dc-cm AUX DC common mode voltage 0 -- 2 V V-aux_turnCM Aux turn around common mode voltage -- 0.4 V 341 Electrical Characteristics 8.6 AC Characteristics Table 8-17. PCI Express* Interface Timings Symbol Parameter Min Max Unit Figures Notes Transmitter and Receiver Timings UI TTX-EYE TTX-RISE/ Fall TRX-EYE Unit Interval - PCI Express* 399.88 400.12 ps Minimum Transmission Eye Width 0.7 -- UI D+/D- TX Out put Rise/Fall time -- 0.125 UI 0.40 -- UI Minimum Receiver Eye Width 5 8-26 1,2 1,2 8-27 3,4 NOTES: 1. Specified at the measurement point into a timing and voltage compliance test load and measured over any 250 consecutive TX UIs. (Also refer to the Transmitter compliance eye diagram). 2. A TTX-EYE = 0.70 UI provides for a total sum of deterministic and random jitter budget of TTXJITTER-MAX = 0.30 UI for the Transmitter collected over any 250 consecutive TX UIs. The TTXEYE-MEDIAN-to-MAX-JITTER specification ensures a jitter distribution in which the median and the maximum deviation from the median is less than half of the total TX jitter budget collected over any 250 consecutive TX UIs. It should be noted that the median is not the same as the mean. The jitter median describes the point in time where the number of jitter points on either side is approximately equal as opposed to the averaged time value. 3. Specified at the measurement point and measured over any 250 consecutive UIs. The test load documented in the PCI Express* specification 2.0 should be used as the RX device when taking measurements (also refer to the Receiver compliance eye diagram). If the clocks to the RX and TX are not derived from the same reference clock, the TX UI recovered from 3500 consecutive UI must be used as a reference for the eye diagram. 4. A TRX-EYE = 0.40 UI provides for a total sum of 0.60 UI deterministic and random jitter budget for the Transmitter and interconnect collected any 250 consecutive UIs. The TRXEYE-MEDIAN-to--MAX-JITTER specification ensures a jitter distribution in which the median and the maximum deviation from the median is less than half of the total 0.6 UI jitter budget collected over any 250 consecutive TX UIs. It should be noted that the median is not the same as the mean. The jitter median describes the point in time where the number of jitter points on either side is approximately equal as opposed to the averaged time value. If the clocks to the RX and TX are not derived from the same reference clock, the TX UI recovered from 3500 consecutive UI must be used as the reference for the eye diagram. 5. Nominal Unit Interval is 400 ps for 2.5 GT/s and 200 ps for 5 GT/s. 342 Datasheet Electrical Characteristics Table 8-18. HDMI Interface Timings (DDP[D:B][3:0]) Symbol Parameter Min Max Unit Figures Notes Transmitter and Receiver Timings UI Unit Interval 600 4000 ps TTX-EYE Minimum Transmission Eye Width 0.8 -- UI 1,2 TTX-RISE/Fall D+/D- TX Out put Rise/Fall time -- 0.125 UI 1,2 -- 0.25 UI TMDS Clock Jitter T-skewintra-pair Intra pair skew at source connector -- 0.15 TBIT T-skewinter-pair Inter pair skew at source connector -- 0.2 Tchar acter Clock Duty Cycle 10 60% % Duty Cycle NOTES: 1. Specified at the measurement point into a timing and voltage compliance test load and measured over any 250 consecutive TX UIs. (Also refer to the Transmitter compliance eye diagram). 2. A TTX-EYE = 0.70 UI provides for a total sum of deterministic and random jitter budget of TTXJITTER-MAX = 0.30 UI for the Transmitter collected over any 250 consecutive TX UIs. The TTXEYE-MEDIAN-to-MAX-JITTER specification ensures a jitter distribution in which the median and the maximum deviation from the median is less than half of the total TX jitter budget collected over any 250 consecutive TX UIs. It should be noted that the median is not the same as the mean. The jitter median describes the point in time where the number of jitter points on either side is approximately equal as opposed to the averaged time value. Table 8-19. SDVO Interface Timings Symbol Parameter Min Max Unit Figures Notes Transmitter and Receiver Timings UI TTX-EYE TTX-RISE/ Fall TRX-EYE 369.89 1000 ps Minimum Transmission Eye Width Unit Interval 0.7 -- UI D+/D- TX Out put Rise/Fall time -- 0.125 UI 0.40 -- UI Minimum Receiver Eye Width 5 8-26 1,2 1,2 8-27 3,4 NOTES: 1. Specified at the measurement point into a timing and voltage compliance test load and measured over any 250 consecutive TX UIs. (Also refer to the Transmitter compliance eye diagram). 2. A TTX-EYE = 0.70 UI provides for a total sum of deterministic and random jitter budget of TTXJITTER-MAX = 0.30 UI for the Transmitter collected over any 250 consecutive TX UIs. The TTXEYE-MEDIAN-to-MAX-JITTER specification ensures a jitter distribution in which the median and the maximum deviation from the median is less than half of the total TX jitter budget collected over any 250 consecutive TX UIs. It should be noted that the median is not the same as the mean. The jitter median describes the point in time where the number of jitter points on either side is approximately equal as opposed to the averaged time value. 3. Specified at the measurement point and measured over any 250 consecutive UIs. The test load documented in the PCI Express* specification 2.0 should be used as the RX device Datasheet 343 Electrical Characteristics 4. 5. when taking measurements (also refer to the Receiver compliance eye diagram). If the clocks to the RX and TX are not derived from the same reference clock, the TX UI recovered from 3500 consecutive UI must be used as a reference for the eye diagram. A TRX-EYE = 0.40 UI provides for a total sum of 0.60 UI deterministic and random jitter budget for the Transmitter and interconnect collected any 250 consecutive UIs. The TRXEYE-MEDIAN-to--MAX-JITTER specification ensures a jitter distribution in which the median and the maximum deviation from the median is less than half of the total 0.6 UI jitter budget collected over any 250 consecutive TX UIs. It should be noted that the median is not the same as the mean. The jitter median describes the point in time where the number of jitter points on either side is approximately equal as opposed to the averaged time value. If the clocks to the RX and TX are not derived from the same reference clock, the TX UI recovered from 3500 consecutive UI must be used as the reference for the eye diagram. Nominal Unit Interval for highest SDVO speed is 370 ps. However, depending on the resolution on the interface, the UI may be more than 370 ps. Table 8-20. DisplayPort Interface Timings (DDP[D:B][3:0]) Symbol Min Nom Max Unit UI_High_Rate Unit Interval for High Bit Rate (2.7 Gbps/lane) 370 -- ps UI_Low_Rate Unit Interval for Reduced Bit Rate (1.62 Gbps/lane) 617 -- ps Down_Spread_ Amplitude Link clock down spreading 0 -- 0.5 % Down_Spread_ Frequency Link clock down-spreading frequency 30 -- 33 kHz Ltx-skewintrapair Lane Intra-pair output skew at Tx package pins -- 20 ps Ttx-rise/ fall_mismatch_ chipdiff Lane Intra-pair Rise/Fall time mismatch at Tx package pin 5 % -- VTX-DIFFp-p-level1 Differential Peak-to-peak Output Voltage level 1 0.34 0.4 0.46 V VTX-DIFFp-p-level2 Differential Peak-to-peak Output Voltage level 2 0.51 0.6 0.68 V VTX-DIFFp-p-level3 Differential Peak-to-peak Output Voltage level 3 0.69 0.8 0.92 V VTX-preemp_ratio No Pre-emphasis 0 0 0 dB VTX-preemp_ratio 3.5 dB Pre-emphasis Level 2.8 3.5 4.2 dB VTX-preemp_ratio 6.0 dB Pre-emphasis Level 4.8 6 7.2 dB LTX-SKEW- Lane-to-Lane Output Skew at Tx package pins -- -- 2 UI INTER_PAIR 344 Parameter Datasheet Electrical Characteristics Table 8-21. DisplayPort Aux Interface Symbol Parameter Min Nom Max Unit Aux unit interval 0.4 0.5 0.6 us TAux_bus_park AUX CH bus park time 10 -- -- ns Tcycle-to-cycle jitter maximum allowable UI variation within a single transaction at the connector pins of a transmitting device 0.04 UI -- maximum allowable UI variation within a single transaction at the connector pins of a receiving device 0.05 UI -- UI Table 8-22. DDC Characteristics DDC Signals: CRT_DDC_CLK, CRT_DDC_DATA, L_DDC_CLK, L_DDC_DATA, SDVO_CTRLCLK, SDVO_CTRLDATA, DDP[D:C]_CTRLCLK, DDP[D:C]_CTRLDATA Symbol Parameter Standard Mode Fast Mode Max Min Max Min Max 400 -- 1000 -- -- 250 -- Fscl Operating Frequency 100 -- Tr Rise Time 1 -- -- Tf 1 Fall Time 1 MHz 250 2 20+0.1Cb Units kHz ns 120 ns NOTES: 1. Measurement Point for Rise and Fall time: VIL(min)-VIL(max). 2. Cb = total capacitance of one bus line in pF. If mixed with High-speed mode devices, faster fall times according to High-Speed mode Tr/Tf are allowed. Datasheet 345 Electrical Characteristics Table 8-23. LVDS Interface AC characteristics at Various Frequencies (Sheet 1 of 2) Symbol Parameter Min Nom Max Unit LLHT LVDS Low-to-High Transition Time 0.25 0.5 0.75 ns LHLT LVDS High-to-Low Transition Time 0.25 0.5 0.75 ns Figures Figure 8-24 Notes 1, Across receiver termination 1, Across receiver termination Frequency = 40-MHz TPPos0 Transmitter Output Pulse for Bit 0 -0.25 0 0.25 ns TPPos1 Transmitter Output Pulse for Bit 1 3.32 3.57 3.82 ns TPPos2 Transmitter Output Pulse for Bit 2 6.89 7.14 7.39 ns TPPos3 Transmitter Output Pulse for Bit 3 10.46 10.71 10.96 ns TPPos4 Transmitter Output Pulse for Bit 4 14.04 14.29 14.54 ns TPPos5 Transmitter Output Pulse for Bit 5 17.61 17.86 18.11 ns TPPos6 Transmitter Output Pulse for Bit 6 21.18 21.43 21.68 ns -- 350 370 ps TJCC Transmitter Jitter Cycle-to-Cycle Figure 8-25 Frequency = 65-MHz TPPos0 Transmitter Output Pulse for Bit 0 -0.20 0 0.20 ns TPPos1 Transmitter Output Pulse for Bit 1 2.00 2.20 2.40 ns TPPos2 Transmitter Output Pulse for Bit 2 4.20 4.40 4.60 ns TPPos3 Transmitter Output Pulse for Bit 3 6.39 6.59 6.79 ns TPPos4 Transmitter Output Pulse for Bit 4 8.59 8.79 8.99 ns TPPos5 Transmitter Output Pulse for Bit 5 10.79 10.99 11.19 ns TPPos6 Transmitter Output Pulse for Bit 6 12.99 13.19 13.39 ns -- -- 250 ps TJCC 346 Transmitter Jitter Cycle-to-Cycle Figure 8-25 Datasheet Electrical Characteristics Table 8-23. LVDS Interface AC characteristics at Various Frequencies (Sheet 2 of 2) Symbol Parameter Min Nom Max Unit Figures Notes Frequency = 85-MHz TPPos0 Transmitter Output Pulse for Bit 0 -0.20 0 0.20 ns TPPos1 Transmitter Output Pulse for Bit 1 1.48 1.68 1.88 ns TPPos2 Transmitter Output Pulse for Bit 2 3.16 3.36 3.56 ns TPPos3 Transmitter Output Pulse for Bit 3 4.84 5.04 5.24 ns TPPos4 Transmitter Output Pulse for Bit 4 6.52 6.72 6.92 ns TPPos5 Transmitter Output Pulse for Bit 5 8.20 8.40 8.60 ns TPPos6 Transmitter Output Pulse for Bit 6 9.88 10.08 10.28 ns -- -- 250 ps TJCC Transmitter Jitter Cycle-to-Cycle Figure 8-25 Frequency = 108-MHz TPPos0 Transmitter Output Pulse for Bit 0 -0.20 0 0.20 ns TPPos1 Transmitter Output Pulse for Bit 1 1.12 1.32 1.52 ns TPPos2 Transmitter Output Pulse for Bit 2 2.46 2.66 2.86 ns TPPos3 Transmitter Output Pulse for Bit 3 3.76 3.96 4.16 ns TPPos4 Transmitter Output Pulse for Bit 4 5.09 5.29 5.49 ns TPPos5 Transmitter Output Pulse for Bit 5 6.41 6.61 6.81 ns TPPos6 Transmitter Output Pulse for Bit 6 7.74 7.94 8.14 ns -- -- 250 ps TJCC Datasheet Transmitter Jitter Cycle-to-Cycle Figure 8-25 347 Electrical Characteristics Table 8-24. CRT DAC AC Characteristics Parameter Min Pixel Clock Frequency Nom Max 400 Units Notes MHz R, G, B Video Rise Time 0.25 -- 1.25 ns 1, 2, 8 (10-90% of black-to-white transition, @ 400-MHz pixel clock) R, G, B Video Fall Time 0.25 -- 1.25 ns 1, 3, 8 (90-10% of white-to-black transition, @ 400-MHz pixel clock) 0.75 ns 1, 4, 8 @ 400-MHz pixel clock 0.625 ns 1, 5, 8 @ 400-MHz pixel clock V 1, 6, 8 Full-scale voltage step of 0.7 V % 1, 7, 8 Settling Time Video channel-to-channel output skew Overshoot/ Undershoot -0.084 Noise Injection Ratio -- 2.5 +0.084 NOTES: 1. Measured at each R, G, B termination according to the VESA Test Procedure - Evaluation of Analog Display Graphics Subsystems Proposal (Version 1, Draft 4, December 1, 2000). 2. R, G, B Max Video Rise/Fall Time: 50% of minimum pixel clock period. 3. R, G, B Min Video Rise/Fall Time: 10% of minimum pixel clock period. 4. Max settling time: 30% of minimum pixel clock period. 5. Video channel-channel output skew: 25% of minimum pixel clock period. 6. Overshoot/undershoot: 12% of black-white video level (full-scale) step function. 7. Noise injection ratio: 2.5% of maximum luminance voltage (dc to max. pixel frequency). 8. R, G, B AC parameters are strongly dependent on the board implementation. Table 8-25. Clock Timings (Sheet 1 of 3) Sym Parameter Min Max Unit Notes Figure PCI Clock (CLKOUT_PCI[4:0]) t1 Period 29.566 30.584 ns 8-9 t2 High Time 10.826 17.850 ns 8-9 t3 Low Time 10.426 17.651 ns 8-9 Duty Cycle 40 60 % Rising Edge Rate 1.0 4 V/ns Falling Edge Rate 1.0 4 V/ns -- 500 ps t4 t5 Jitter 8-9 8-9 7,9 14 MHz Flex Clock (CLKOUTFLEX[3:0]) t6 Period 69.820 69.862 ns 8-9 t7 High Time 29.975 38.467 ns 8-9 t8 Low Time 29.575 38.267 ns 8-9 Duty Cycle 40 60 % - Rising Edge Rate 1.0 4 V/ns - Falling Edge Rate 1.0 4 V/ns 5 -- 1000 ps 7,9 1 Jitter 5 48 MHz Flex Clock (CLKOUTFLEX3) t9 t10 348 Period High Time 20.831 20.835 ns 8.217 11.152 ns 8-9 8-9 Datasheet Electrical Characteristics Table 8-25. Clock Timings (Sheet 2 of 3) Sym t11 Parameter Low Time Duty Cycle Unit Min Max 7.817 10.952 ns 40 60 % Notes 8-9 - Rising Edge Rate 1.0 4 V/ns 5 - Falling Edge Rate 1.0 4 V/ns 5 -- 350 ps 7,9 Jitter Figure CLKOUT_BCLK[1:0]_[P,N] Period Period SSC On 7.349 7.688 ns 8-28 Period Period SSC Off 7.349 7.651 ns 8-28 40 60 DtyCyc Duty Cycle V_Swing Differential Output Swing 300 % 8-28 mV 8-28 Slew_rise Rising Edge Rate 1.5 Slew_fall Falling Edge Rate 1.5 4 V/ns 8-28 4 V/ns 8-28 Jitter (CLKOUT_BCLK[0]_P:N]) -- 150 ps 7,9 Jitter (CLKOUT_BCLK[1]_P:N]) -- 350 ps 7,9 BCLK Input (CLKIN_BCLK_[P:N]) Period Period SSC on 7.349 7.688 Period Period SSC Off ns 8-28 7.349 7.651 ns Slew Rate 1 8 V/ns 7 8-28 Input Jitter (see Clock Chip Specification) - 150 ps 8 CLKOUT_DP_[P,N] Period Period SSC On 7.983 8.726 ns 8-28 Period Period SSC Off 7.983 8.684 ns 8-28 DtyCyc Duty Cycle 40 60 % 8-28 Differential Output Swing 300 -- mV 8-28 Slew_rise Rising Edge Rate 1.5 4 V/ns 8-28 Slew_fall Falling Edge Rate 1.5 4 V/ns 350 ps V_Swing Jitter 8-28 7,9 CLKOUT_PCIE[7:0], CLKOUT_DMI_[P,N], CLKOUT_PEG_[B:A]_[P,N] Period Period SSC On 9.849 10.201 ns 8-28 Period Period SSC Off 9.849 10.151 ns 8-28 DtyCyc Duty Cycle 40 60 % 8-28 Differential Output Swing 300 -- mV 8-28 Slew_rise Rising Edge Rate 1.5 4 V/ns 8-28 Slew_fall Falling Edge Rate 1.5 4 V/ns -- 150 ps V_Swing Jitter 8-28 7,9,10 SMBus/SMLink Clock (SMBCLK, SML[1:0]CLK) fsmb Datasheet Operating Frequency 10 100 KHz t18 High time 4.0 50 s t19 Low time 4.7 -- s 2 8-18 8-18 349 Electrical Characteristics Table 8-25. Clock Timings (Sheet 3 of 3) Sym Parameter Min Max Unit Notes Figure t20 Rise time -- 1000 ns 8-18 t21 Fall time -- 300 ns 8-18 SMLink0 Clock (SML0CLK) (See note 13) fsmb Operating Frequency 0 400 KHz t18_SML High time 0.6 50 s t19_SML Low time 1.3 -- s 2 8-18 8-18 t20_SML Rise time -- 300 ns 8-18 t21_SML Fall time -- 300 ns 8-18 HDA_BCLK (Intel(R) High Definition Audio) fHDA Operating Frequency 24.0 MHz Frequency Tolerance -- 100 ppm t26a Input Jitter (see Clock Chip Specification) -- 300 ppm t27a High Time (Measured at 0.75 Vcc) 18.75 22.91 ns 8-9 t28a Low Time (Measured at 0.35 Vcc) 18.75 22.91 ns 8-9 SATA Clock and DMI Clock (CLKIN_SATA_[P:N], CLKIN_DMI_[P:N]) from a clock chip t36 Period 9.997 10.0533 ns Slew rate 1 8 V/ns Input Jitter (see Clock Chip Specification) -- 150 ps 7 DOT 96MHz (CLKIN_DOT96[P,N]) from a clock chip t36 Period 10.066 10.768 ns Slew rate 1 8 V/ns Input Jitter (see Clock Chip Specification) -- 350 ps 7 Suspend Clock (SUSCLK) fsusclk Operating Frequency t39 High Time t39a Low Time 32 Intel(R) fpwm kHz 4 10 -- s 4 10 -- s 4 Quiet System Technology PWM Operating Frequency 10 28,000 Hz SPI_CLK Slew_Rise Output Rise Slew Rate (0.2Vcc 0.6Vcc) 1 4 V/ns 7 8-29 Slew_Fall Output Fall Slew Rate (0.6Vcc 0.2Vcc) 1 4 V/ns 7 8-29 XTAL25_IN/XTAL25_OUT ppm 350 Crystal Tolerance Cut Accuracy Max ppm Temperature Stability Max ppm Aging Max 35 ppm (@ 25 C 3 C) 30 ppm @ (-10 C to 70 C) 5 ppm Datasheet Electrical Characteristics NOTES: 1. The CLK48 expects a 40/60% duty cycle. 2. The maximum high time (t18 Max) provide a simple ensured method for devices to detect bus idle conditions. 3. BCLK Rise and Fall times are measured from 10%VDD and 90%VDD. 4. SUSCLK duty cycle can range from 30% minimum to 70% maximum. 5. Edge rates in a system as measured from 0.8 V to 2.0 V. 6. The active frequency can be 5 MHz, 50 MHz, or 62.5 MHz depending on the interface speed. Dynamic changes of the normal operating frequency are not allowed. 7. Testing condition: 1 KOhm pull up to Vcc, 1 KOhm pull down and 10 pF pull down and 1/2 inch trace (see Figure 8-29 for more detail). 8. Jitter is specified as cycle to cycle measured in pico seconds. Period min and max includes cycle to cycle jitter. 9. On all jitter measurements care should be taken to set the zero crossing voltage (for rising edge) of the clock to be the point where the edge rate is the fastest. Using a Math function = Average(Derivavitive(Ch1)) and set the averages to 64, place the cursors where the slope is the highest on the rising edge--usually this lower half of the rising edge. The reason this is defined is for users trying to measure in a system it is impossible to get the probe exactly at the end of the Transmission line with large Flip Chip components, this results in a reflection induced ledge in the middle of the rising edge and will significantly increase measured jitter. 10. Phase jitter requirement: The designated Gen2 outputs will meet the reference clock jitter requirements from the PCI Express Gen2 Base Specification. The test is to be performed on a component test board under quiet conditions with all clock outputs on. Jitter analysis is performed using a standardized tool provided by the PCI SIG. Measurement methodology is defined in Intel document "PCI Express Reference Clock Jitter Measurements". Note that this is not for CLKOUT_PCIE[7:0]. 11. Crystal Specifications provided are guidelines and applies when a 25 MHz crystal is used on the platform. Total of crystal cut accuracy, temperature stability, frequency variations due to parasitics and load capacitances and aging is recommended to be less than 90 ppm. 12. When SMLink0 is configured to run in Fast Mode using a soft strap, the operating frequency is in the range of 300 KHz - 400 KHz. Datasheet 351 Electrical Characteristics Table 8-26. PCI Interface Timing Sym Parameter Min Max Units Notes Figure 1 8-10 t40 AD[31:0] Valid Delay 2 11 ns t41 AD[31:0] Setup Time to PCICLK Rising 7 -- ns 8-11 t42 AD[31:0] Hold Time from PCICLK Rising 0 -- ns 8-11 t43 C/BE[3:0]#, FRAME#, TRDY#, IRDY#, STOP#, PAR, PERR#, PLOCK#, DEVSEL# Valid Delay from PCICLK Rising 2 11 ns t44 C/BE[3:0]#, FRAME#, TRDY#, IRDY#, STOP#, PAR, PERR#, PLOCK#, IDSEL, DEVSEL# Output Enable Delay from PCICLK Rising 2 t45 C/BE[3:0]#, FRAME#, TRDY#, IRDY#, STOP#, PERR#, PLOCK#, DEVSEL#, GNT[A:B]# Float Delay from PCICLK Rising 2 t46 C/BE[3:0]#, FRAME#, TRDY#, IRDY#, STOP#, SERR#, PERR#, DEVSEL#, Setup Time to PCICLK Rising 7 t47 C/BE[3:0]#, FRAME#, TRDY#, IRDY#, STOP#, SERR#, PERR#, DEVSEL#, REQ[A:B]# Hold Time from PCLKIN Rising 0 t48 PCIRST# Low Pulse Width 1 t49 GNT[3:0]# Valid Delay from PCICLK Rising 2 12 ns t50 REQ[3:0]# Setup Time to PCICLK Rising 12 -- ns 28 -- 1 8-10 ns 8-14 ns 8-12 ns 8-11 ns 8-11 ms 8-13 NOTE: 1. See note 3 of table 4-4 in Section 4.2.2.2 and note 2 of table 4-6 in Section 4.2.3.2 of the PCI Local Bus Specification, Revision 2.3 for measurement details. 352 Datasheet Electrical Characteristics Table 8-27. Universal Serial Bus Timing Sym Parameter Min Max Units Notes Fig Full-speed Source (Note 7) t100 USBPx+, USBPx- Driver Rise Time 4 20 ns 1, CL = 50 pF 8-15 t101 USBPx+, USBPx- Driver Fall Time 4 20 ns 1, CL = 50 pF 8-15 -3.5 3.5 ns 2, 3 8-16 -4 4 ns 8-17 Source Differential Driver Jitter t102 - To Next Transition - For Paired Transitions t103 Source SE0 interval of EOP 160 175 ns 4 t104 Source Jitter for Differential Transition to SE0 Transition -2 5 ns 5 3 8-16 4 8-17 Receiver Data Jitter Tolerance t105 - T o Next Transition -18.5 18.5 ns - For Paired Transitions -9 9 ns t106 EOP Width: Must accept as EOP 82 -- ns t107 Width of SE0 interval during differential transition -- 14 ns Low-speed Source (Note 8) t108 USBPx+, USBPx - Driver Rise Time 75 300 ns 1, 6 CL = 50 pF CL = 350 pF 8-15 t109 USBPx+, USBPx - Driver Fall Time 75 300 ns 1,6 CL = 50 pF CL = 350 pF 8-15 To Next Transition -25 25 ns 2, 3 8-16 For Paired Transitions -14 14 ns t111 Source SE0 interval of EOP 1.25 1.50 s 4 8-17 t112 Source Jitter for Differential Transition to SE0 Transition -40 100 ns 5 Receiver Data Jitter Tolerance - To Next Transition -152 152 ns 3 8-16 - For Paired Transitions -200 200 ns 670 -- ns 4 8-17 -- 210 ns Source Differential Driver Jitter t110 t113 t114 EOP Width: Must accept as EOP t115 Width of SE0 interval during differential transition NOTES: 1. Driver output resistance under steady state drive is specified at 28 ohms at minimum and 43 ohms at maximum. 2. Timing difference between the differential data signals. 3. Measured at crossover point of differential data signals. 4. Measured at 50% swing point of data signals. 5. Measured from last crossover point to 50% swing point of data line at leading edge of EOP. 6. Measured from 10% to 90% of the data signal. 7. Full-speed Data Rate has minimum of 11.97 Mb/s and maximum of 12.03 Mb/s. 8. Low-speed Data Rate has a minimum of 1.48 Mb/s and a maximum of 1.52 Mb/s. Datasheet 353 Electrical Characteristics Table 8-28. SATA Interface Timings Sym Min Max Units Gen I Operating Data Period 666.43 670.23 ps UI-2 Gen II Operating Data Period (3Gb/ s) 333.21 335.11 ps t120 Rise Time 0.15 0.41 UI 1 t121 Fall Time 0.15 0.41 UI 2 t122 TX differential skew -- 20 ps t123 COMRESET 310.4 329.6 ns 3 t124 COMWAKE transmit spacing 103.5 109.9 ns 3 t125 OOB Operating Data period 646.67 686.67 ns 4 UI Parameter Notes Figure NOTES: 1. 20% - 80% at transmitter. 2. 80% - 20% at transmitter. 3. As measured from 100 mV differential crosspoints of last and first edges of burst. 4. Operating data period during Out-Of-Band burst transmissions. Table 8-29. SMBus Timing (Sheet 1 of 2) Sym Min Max Units Bus Free Time Between Stop and Start Condition 4.7 -- s Bus Free Time Between Stop and Start Condition 1.3 -- s Hold Time after (repeated) Start Condition. After this period, the first clock is generated. 4.0 -- s Hold Time after (repeated) Start Condition. After this period, the first clock is generated. 0.6 -- s t132 Repeated Start Condition Setup Time 4.7 -- s t132SM Repeated Start Condition Setup Time 0.6 -- s t133 Stop Condition Setup Time 4.0 -- s t133SM Stop Condition Setup Time 0.6 -- s 5 8-18 t130 t130SM LFM t131 t131SM LFM LFM LFM Notes Fig 8-18 5 8-18 8-18 5 8-18 8-18 5 8-18 8-18 t134 Data Hold Time 0 -- ns 4 8-18 t134SM Data Hold Time 0 -- ns 4, 5 8-18 LFM t135 Data Setup Time 250 -- ns t135SM Data Setup Time 100 -- ns 5 t136 Device Time Out 25 35 ms 1 t137 Cumulative Clock Low Extend Time (slave device) -- 25 ms 2 LFM 354 Parameter 8-18 8-18 8-19 Datasheet Electrical Characteristics Table 8-29. SMBus Timing (Sheet 2 of 2) Sym t138 Parameter Cumulative Clock Low Extend Time (master device) Min Max Units Notes Fig -- 10 ms 3 8-19 NOTES: 1. A device will timeout when any clock low exceeds this value. 2. t137 is the cumulative time a slave device is allowed to extend the clock cycles in one message from the initial start to stop. If a slave device exceeds this time, it is expected to release both its clock and data lines and reset itself. 3. t138 is the cumulative time a master device is allowed to extend its clock cycles within each byte of a message as defined from start-to-ack, ack-to-ack or ack-to-stop. 4. t134 has a minimum timing for I2C of 0 ns, while the minimum timing for SMBus is 300 ns. 5. Timings with the SMLFM designator apply only to SMLink0 and only when SMLink0 is operating in Fast Mode. Table 8-30. Intel(R) High Definition Audio Timing Sym Parameter Min Max Units Notes Fig t143 Time duration for which HDA_SD is valid before HDA_BCLK edge. 7 -- ns 8-21 t144 Time duration for which HDA_SDOUT is valid after HDA_BCLK edge. 7 -- ns 8-21 t145 Setup time for HDA_SDIN[3:0] at rising edge of HDA_BCLK 15 -- ns 8-21 t146 Hold time for HDA_SDIN[3:0] at rising edge of HDA_BCLK 0 -- ns 8-21 Min Max Units Table 8-31. LPC Timing Sym Datasheet Parameter Notes Fig t150 LAD[3:0] Valid Delay from PCICLK Rising 2 11 ns 8-10 t151 LAD[3:0] Output Enable Delay from PCICLK Rising 2 -- ns 8-14 t152 LAD[3:0] Float Delay from PCICLK Rising -- 28 ns 8-12 t153 LAD[3:0] Setup Time to PCICLK Rising 7 -- ns 8-11 t154 LAD[3:0] Hold Time from PCICLK Rising 0 -- ns 8-11 t155 LDRQ[1:0]# Setup Time to PCICLK Rising 12 -- ns 8-11 t156 LDRQ[1:0]# Hold Time from PCICLK Rising 0 -- ns 8-11 t157 eE# Valid Delay from PCICLK Rising 2 12 ns 8-10 355 Electrical Characteristics Table 8-32. Miscellaneous Timings Sym Parameter Min Max Units Notes Fig t160 SERIRQ Setup Time to PCICLK Rising 7 -- ns 8-11 t161 SERIRQ Hold Time from PCICLK Rising 0 -- ns 8-11 t162 RI#, EXTSMI#, GPIO, USB Resume Pulse Width 2 -- RTCCLK 8-13 8-10 t163 SPKR Valid Delay from OSC Rising -- 200 ns t164 SERR# Active to NMI Active -- 200 ns t165 IGNNE# Inactive from FERR# Inactive -- 230 ns Table 8-33. SPI Timings (20 MHz) Sym Parameter Min Max Units Notes 17.06 18.73 MHz 1 Fig t180a Serial Clock Frequency - 20M Hz Operation t183a Tco of SPI_MOSI with respect to serial clock falling edge at the host -5 13 ns 8-20 t184a Setup of SPI_MISO with respect to serial clock falling edge at the host 16 -- ns 8-20 t185a Hold of SPI_MISO with respect to serial clock falling edge at the host 0 -- ns 8-20 t186a Setup of SPI_CS[1:0]# assertion with respect to serial clock rising at the host 30 -- ns 8-20 t187a Hold of SPI_CS[1:0]# de-assertion with respect to serial clock falling at the host 30 -- ns 8-20 t188a SPI_CLK high time 26.37 -- ns 8-20 t189a SPI_CLK low time 26.82 -- ns 8-20 NOTES: 1. The typical clock frequency driven by the PCH is 17.86 MHz. 2. Measurement point for low time and high time is taken at 0.5(VccME3_3). 356 Datasheet Electrical Characteristics Table 8-34. SPI Timings (33 MHz) Sym Parameter Min Max Units Notes 29.83 32.81 MHz 1 Fig t180b Serial Clock Frequency - 33 MHz Operation t183b Tco of SPI_MOSI with respect to serial clock falling edge at the host -5 5 ns 8-20 t184b Setup of SPI_MISO with respect to serial clock falling edge at the host 8 -- ns 8-20 t185b Hold of SPI_MISO with respect to serial clock falling edge at the host 0 -- ns 8-20 t186b Setup of SPI_CS[1:0]# assertion with respect to serial clock rising at the host 30 -- ns 8-20 t187b Hold of SPI_CS[1:0]# de-assertion with respect to serial clock falling at the host 30 -- ns 8-20 t188b SPI_CLK High time 14.88 - ns 8-20 t189b SPI_CLK Low time 15.18 - ns 8-20 NOTES: 1. The typical clock frequency driven by the PCH is 31.25 MHz. 2. Measurement point for low time and high time is taken at 0.5(VccME3_3). Table 8-35. SPI Timings (50 MHz) Sym Parameter Min Max Units Notes Fig t180c Serial Clock Frequency - 50MHz Operation 46.99 53.40 MHz 1 t183c Tco of SPI_MOSI with respect to serial clock falling edge at the host -3 3 ns 8-20 t184c Setup of SPI_MISO with respect to serial clock falling edge at the host 8 -- ns 8-20 t185c Hold of SPI_MISO with respect to serial clock falling edge at the host 0 -- ns 8-20 t186c Setup of SPI_CS[1:0]# assertion with respect to serial clock rising edge at the host 30 -- ns 8-20 t187c Hold of SPI_CS[1:0]# assertion with respect to serial clock rising edge at the host 30 -- ns 8-20 t188c SPI_CLK High time 7.1 -- ns 2, 3 8-20 t189c SPI_CLK Low time 11.17 -- ns 2, 3 8-20 NOTES: 1. Typical clock frequency driven by the PCH is 50 MHz. This frequency is not available for ES1 samples. 2. When using 50 MHz mode ensure target flash component can meet t188c and t189c specifications. 3. Measurement point for low time and high time is taken at 0.5(VccME3_3). Datasheet 357 Electrical Characteristics Table 8-36. SST Timings Sym tBIT Parameter Min Max Units Bit time (overall time evident on SST) 0.495 500 s Bit time driven by an originator 0.495 250 s tBIT,jitter Bit time jitter between adjacent bits in an SST message header or data bytes after timing has been negotiated -- -- % tBIT,drift Change in bit time across a SST address or SST message bits as driven by the originator. This limit only applies across tBIT-A bit drift and tBIT-M drift. -- -- % tH1 High level time for logic '1' 0.6 0.8 x tBIT tH0 High level time for logic '0' 0.2 0.4 x tBIT tSSTR Rise time (measured from VOL = 0.3 V to VIH,min) -- 25 + 5 ns/ node tSSTF Fall time (measured from VOH = 1.1 V to VIL,max) -- 33 ns/ node Notes 1 Fig - 2 NOTES: 1. The originator must drive a more restrictive time to allow for quantized sampling errors by a client yet still attain the minimum time less than 500 s. tBIT limits apply equally to tBITA and tBIT-M. PCH is targeted on 1 Mbps which is 1 s bit time. 2. The minimum and maximum bit times are relative to tBIT defined in the Timing Negotiation pulse. 3. tBIT-A is the negotiated address bit time and tBIT-M is the negotiated message bit time. 358 Datasheet Electrical Characteristics Table 8-37. PECI Timings Sym Min Max Units 0.495 500 s 0.495 250 s tBIT,jitter Bit time jitter between adjacent bits in an PECI message header or data bytes after timing has been negotiated -- -- % tBIT,drift Change in bit time across a PECI address or PECI message bits as driven by the originator. This limit only applies across tBIT-A bit drift and tBIT-M drift. -- -- % tH1 High level time for logic '1' 0.6 0.8 x tBIT tH0 High level time for logic '0' 0.2 0.4 x tBIT tPECIR Rise time (measured from VOL to VIH,min, Vtt(nom) -5%) -- 30 + 5 ns/ node 3 tPECIF Fall time (measured from VOH to VIL,max, Vtt(nom) +5%) -- 30 ns/ node 3 tBIT Parameter Bit time (overall time evident on PECI) Bit time driven by an originator Notes Fig 1 2 NOTES: 1. The originator must drive a more restrictive time to allow for quantized sampling errors by a client yet still attain the minimum time less than 500 s. tBIT limits apply equally to tBIT-A and tBIT-M. PCH is targeted on 2 MHz which is 500 ns bit time. 2. The minimum and maximum bit times are relative to tBIT defined in the Timing Negotiation pulse. 3. Extended trace lengths may appear as additional nodes. 4. tBIT-A is the negotiated address bit time and tBIT-M is the negotiated message bit time. Table 8-38. Controller Link Receive Timings Sym Parameter Min Max Units Notes Fig t190 Single bit time 13 -- ns 8-30 t191 Single clock period 15 -- ns 8-30 t192 Rise time/Fall time 0.11 3.5 V/ns t193 Setup time before CL_CLK1 0.9 -- ns 8-30 t194 Hold time after CL_CLK1 0.9 -- ns 8-30 VIL_AC Input low voltage (AC) -- CL_Vref - 0.08 V 2 VIH_AC Input high voltage (AC) CL_Vref +0.08 -- V 2 1 8-31 NOTES: 1. Measured from (CL_Vref - 50 mV to CL_Vref + 50 mV) at the receiving device side. No test load is required for this measurement as the receiving device fulfills this purpose. 2. CL_Vref = 0.12*(VccSus3_3). Datasheet 359 Electrical Characteristics 8.7 Power Sequencing and Reset Signal Timings Table 8-39. Power Sequencing and Reset Signal Timings (Sheet 1 of 3) Sym 360 Parameter Min Max Units t200 VccRTC active to RTCRST# inactive 9 -- ms t201 VccSUS active to RSMRST# inactive 10 -- ms t202 RSMRST# inactive to SUSCLK toggling 97 -- t203 SLP_S5# high to SLP_S4# high 30 t204 SLP_S4# high to SLP_S3# high 30 t205 Vcc active to PWROK high 10 t206 PWROK deglitch time t207 Notes Fig 8-1 1 8-1 ms 2 8-1 us 3 8-2 us 4 8-2 -- ms 5 8-2, 8-3 1 -- ms 6 8-2, 8-3 VccLAN & VccME stable to MEPWROK high 1 -- ms 8-2, 8-4 t208 Clock chip clock outputs to PWROK high 1 -- ms 8-2, 8-3 t209 PWROK active to PROCPWRGD active See Note 7 -- ms t210 PROCPWRGD high to SUS_STAT# high 1 -- ms 8-2, 8-3 t211 SUS_STAT# high to PLTRST# high 60 -- us 8-2, 8-3 t212 LAN_RST# de-assertion or MEPWROK assertion (whichever comes first) to SPI message 500 -- us 18 8-4 t213 MEPWROK asserted to CL_RST1# deasserted (Mobile Only) 500 -- us 8 8-4 t214 DMI message and all PCI Express ports and DMI in L2/L3 state to SUS_STAT# active 60 -- us 8-5 t215 SUS_STAT# active to STP_PCI# active 60 -- us 8-5 t216 STP_PCI# active to PLTRST# active 150 -- us 8-5 t217 PLTRST# active to PROCPWRGD inactive 30 -- us 8-5 t218 PROCPWRGD deassetion to clocks invalid 10 -- us 8-5 t219 Clocks invalid to SLP_S3# assertion 1 -- us 8-5 t220 SLP_S3# low to SLP_S4# low 30 -- us 8-5 t221 SLP_S4# low to SLP_S5# low 30 -- us 8-5 7 8-2, 8-3 t222 SLP_S3# active to PWROK de-asserted 0 -- t223 PWROK rising to DRAMPWRGD rising 0 -- us 8-5 t224 DRAMPWRGD falling to SLP_S4# falling -100 -- ns 9 8-6 t225 VccRTC supply active to VccSus supplies active 0 -- ms 1, 10 8-1 8-6 Datasheet Electrical Characteristics Table 8-39. Power Sequencing and Reset Signal Timings (Sheet 2 of 3) Sym Datasheet Parameter Min Max Units 20 -- ns Notes Fig t226 RTCRST# high to RSMRST# high 8-1 t227 VccSUS supplies high to VccME3_3 high 0 -- ms 1 t228 LAN Power Rails active to LAN_RST# de-assertion 1 -- ms 11 t229 VccME high to Vcc1_05 high 0 -- ms 8-2 t230 MEPWROK high to PWROK high 0 -- ms 8-2 t231 PWROK low to Vcc falling 40 -- ns 12, 13, 14 t232 MEPWROK falling to VccME or VccME3_3 falling 40 -- ns 14 t233 SLP_S3# falling to Vcc falling 5 -- us 12, 13 t234 LAN_RST# rising to VccLAN falling 40 -- ns 13, 14 t235 RSMRST# falling to VccSUS falling 40 -- ns 1, 13, 14 t236 RTCRST# falling to VccRTC falling 0 -- ms t237 SLP_LAN# (or LANPHYPC) rising to Intel LAN Phy power high and stable -- 20 ms t238 RSMRST# falling to any of VccSUS supplies, VccME, VccME3_3, or Vcc falling 40 -- ns 1, 12, 13, 14 t239 V5REF_Sus active to VccSus3_3 active 0 -- ms 15 See Note 15 -- ms 15 1, 12 t240 V5REF active to Vcc3_3 active t241 VccSus supplies active to Vcc supplies active 0 -- ms t242 HDA_RST# active low pulse width 1 -- s t243 HDA_RST# inactive to HDA_BIT_CLK startup delay 170 -- s t244 VccSus active to SLP_S5#, SLP_S4#, SLP_S3#, SUS_STAT#, PLTRST# and PCIRST#active -- 50 ns t245 RSMRST# de-assertion to SLP_S5# deassertion 97 -- ms t246 S4 Wake Event to SLP_S4# inactive (S4 Wake) See Note Below 3 t247 S3 Wake Event to SLP_S3# inactive (S3 Wake) See Note Below 4 t248 SLP_M# inactive to SLP_S3# inactive -- 10 ns t250 LANRST# assertion to PWROK assertion 0 -- ms t251 RSMRST# de-assertion to MEPWROK assertion 0 -- ms 16, 2 361 Electrical Characteristics Table 8-39. Power Sequencing and Reset Signal Timings (Sheet 3 of 3) Sym Parameter Min Max Units t252 THRMTRIP# active to SLP_S3#, SLP_S4#, SLP_S5# active -- 175 ns t253 RSMRST# rising edge transition from 20% to 80% -- 50 s t254 RSMRST# falling edge transition -- -- -- Notes Fig 17 NOTES: 1. VccSus supplies include VccSus3_3, V5REF_Sus, VccSusHDA, VccLAN (if LAN powered in S3/S4/S5), and VccME3_3 and VccME (if Intel(R) ME powered in S3/S4/S5). 2. This timing is a nominal value counted using RTC clock. If RTC clock isn't already stable at the rising edge of RSMRST#, this timing could be shorter or longer than the specified value. 3. Dependency on SLP_S4# and SLP_M# stretching. 4. Dependency on SLP_S3# and SLP_M# stretching. 5. It is required that the power rails associated with PCI/PCIe (typically the 3.3 V, 5 V, and 12 V core well rails) have been valid for 99 ms prior to PWROK assertion to comply with the 100 ms PCI/PCIe 2.0 specification on PLTRST# de-assertion. System designers must ensure the requirement is met on the platforms. 6. Ensure PWROK is a solid logic '1' before proceeding with the boot sequence. NOTE: If PWROK drops after t206 it will be considered a power failure. 7. t209 minimum timing selectable as 1 ms (recommended), 5 ms, 50 ms, or 100 ms using bits 9:8 of PCHSTRP15. 8. Requires SPI messaging to be completed. 9. The negative min timing implies that DRAMPWRGD must either fall before SLP_S4# or within 100 ns after it. 10. The VccSus supplies must never be active while the VccRTC supply is inactive. 11. Measured from VccLAN power within voltage specification to LAN_RST# = (Vih+Vil)/2. The rising edge of LAN_RST# needs to be a clean, monotonic edge for frequency content below 10 MHz. 12. Vcc includes VccIO, VccCORE, Vcc3_3, VccADPLLA, VccADPLLB, VccADAC, V5REF, V_CPU_IO, VccDMI, VccLAN (if LAN only power in S0), VccALVDS (mobile only), VccTX_LVDS (mobile only), and VccME3_3 and VccME (if Intel(R) ME only powered in S0). 13. A Power rail is considered to be inactive when the rail is at its nominal voltage minus 5% or less. 14. Board design may meet (t231 AND t232 AND t234 AND t235) OR (t238). 15. V5REF must be powered up before Vcc3_3, or after Vcc3_3 within 0.7 V. Also, V5REF must power down after Vcc3_3, or before Vcc3_3 within 0.7 V. V5REF_Sus must be powered up before VccSus3_3, or after VccSus3_3 within 0.7 V. Also, V5REF_Sus must power down after VccSus3_3, or before VccSus3_3 within 0.7 V. 16. If RTC clock is not already stable at RSMRST# rising edge, this time may be longer. 17. RSMRST# falling edge must transition to 0.8 V or less before VccSus3_3 drops to 2.9 V 18. LAN_RST# high to SPI Soft-Start Reads is an internal PCH timing. The timing cannot be measured externally and included here for general power sequencing reference. 362 Datasheet Electrical Characteristics 8.8 Power Management Timing Diagrams Figure 8-1. G3 w/RTC Loss to S4/S5 Timing Diagram Source Destination Board PCH Signal Name VccRTC t226 t200 Board PCH RTCRST# Board PCH VccSUS t225 t201 Board PCH RSMRST# PCH Board SUSCLK PCH Board SLP_S5# t202 Figure 8-2. toggling Only for S4 after G3 S5 to S0 Timing Diagram Source Dest Signal Name PCH Board SLP_S5# PCH Board SLP_S4# PCH Board SLP_S3# PCH Board SLP_M# Board PCH VccME Board PCH Vcc t203 t204 Could come up as early as before SLP_S5# or as late as SLP_S3#, but no later t229 Board Processor Processor VRM PCH SYS_PWROK Board PCH PWROK VCC_CPU No required ordering w.r.t. PWROK, but SYS_PWROK will typically be first t230 t205 t206 t207 Board PCH MEPWROK Board PCH LAN_RST# PCH Processor DRAMPWRGD PCH Clock Chip STP_PCI# Clock Chip PCH Clock Chip Outputs PCH Datasheet Processor PCH Board PCH Processor/ Board MEPWROK may come up earlier than PWROK, but no later LAN_RST# may come up earlier than or at the same time as PWROK, or it may be statically grounded for platforms not using Intel LAN Ramps to `1' with Vcc power stable t208 PROCPWRGD t209 SUS_STAT# t210 PLTRST# t211 363 Electrical Characteristics Figure 8-3. S3/M3 to S0 Timing Diagram Source Dest Signal Name PCH Board SLP_S5# PCH Board SLP_S4# PCH Board SLP_S3# PCH Board SLP_M# Board PCH VccME Board PCH Board Processor Processor VRM PCH SYS_PWROK Board PCH PWROK Board PCH MEPWROK Board PCH LAN_RST# PCH Processor DRAMPWRGD PCH Clock Chip STP_PCI# Clock Chip PCH Clock Chip Outputs PCH Figure 8-4. Vcc Vcc_cpu Processor PCH Board PCH Processor/ Board No required ordering w.r.t. PWROK, but SYS_PWROK will typically be first t205 t206 Ramps to `1' with Vcc_main stable t208 PROCPWRGD t209 SUS_STAT# t210 PLTRST# t211 S5/Moff - S5/M3 Timing Diagram Source Dest Signal Name PCH Board SLP_S5# PCH Board SLP_S4# PCH Board SLP_S3# PCH Board SLP_M# Board PCH VccME, VccLAN Board PCH MEPWROK Board PCH LAN_RST# t207 LAN_RST# will come up at the same time as MEPWROK, or it may be statically grounded for platforms not using Intel LAN t212 PCH SPI Flash PCH Controller Link 364 SPI CL_RST1# t213 Datasheet Electrical Characteristics Figure 8-5. S0 to S5 Timing Diagram Source Dest Signal Name PCH PCIe* Devices PCH Board PCH Clock Chip & Integrated Clk STP_PCI# PCH Board PLTRST# PCH Board PROCPWRGD CPU PCH THRMTRIP# DMI PCIe Ports L2/L3 DMI Message normal operation SUS_STAT# L2/L3 t214 t215 t216 t217 honored ignored t218 PCH Board Clocks valid t219 PCH Board SLP_S3# PCH Board SLP_S4# PCH Board SLP_S5# Board PCH PWROK Board PCH SYS_PWROK t220 t221 t222 PCH Figure 8-6. Datasheet May drop before or after SLP_S4/5# and DRAMPWRGD Processor DRAMPWRGD PCH Board SLP_M# Board PCH MEPWROK / LAN_RST# PCH Controller Link Intel(R) ME-Related Signals Going to M3: stay high Going to MOFF: go low CL_RST#1 DRAMPWRGD Timing Diagram Source Destination Signal Name PCH Board SLP_S4# Board PCH PWROK PCH Processor DRAMPWRGD t223 t224 365 Electrical Characteristics 8.9 AC Timing Diagrams Figure 8-7. Clock Cycle Time Figure 8-8. Transmitting Position (Data to Strobe) CLKA/ CLKB Tppos0 YA/YB Tppos1 Tppos2 Tppos3 Tppos4 Tppos5 Tppos6 Figure 8-9. Clock Timing Period High Time 2.0V 0.8V Low Time Fall Time 366 Rise Time Datasheet Electrical Characteristics Figure 8-10. Valid Delay from Rising Clock Edge Clock 1.5V Valid Delay Output VT Figure 8-11. Setup and Hold Times Clock 1.5V Setup Time Input Hold Time VT VT Figure 8-12. Float Delay Input VT Float Delay Output Figure 8-13. Pulse Width Pulse Width VT Datasheet VT 367 Electrical Characteristics Figure 8-14. Output Enable Delay Clock 1.5V Output Enable Delay Output VT Figure 8-15. USB Rise and Fall Times Rise Time CL 90% Fall Time 90% Differential Data Lines 10% 10% CL tR tF Low-speed: 75 ns at CL = 50 pF, 300 ns at C L = 350 pF Full-speed: 4 to 20 ns at C L = 50 pF High-speed: 0.8 to 1.2 ns at C L = 10 pF Figure 8-16. USB Jitter T period Crossover Points Differential Data Lines Jitter Consecutive Transitions Paired Transitions 368 Datasheet Electrical Characteristics Figure 8-17. USB EOP Width Tperiod Data Crossover Level Differential Data Lines EOP Width Figure 8-18. SMBus/SMLINK Transaction t19 t20 t21 SMBCLK t135 t131 t134 t133 t18 t132 SMBDATA t130 NOTE: txx also refers to txx_SM, SMBCLK also refers to SML[1:0]CLK, and SMBDATA also refers to SML[1:0]DATA in Figure 8-18. Figure 8-19. SMBus/SMLINK Timeout Start Stop t137 CLKack t138 CLKack t138 SMBCLK SMBDATA NOTE: SMBCLK also refers to SML[1:0]CLK and SMBDATA also refers to SML[1:0]DATA in Figure 8-19. Datasheet 369 Electrical Characteristics Figure 8-20. SPI Timings t188 t189 SPI_CLK t183 SPI_MOSI t184 t185 SPI_MISO t186 t187 SPI_CS# Figure 8-21. Intel(R) High Definition Audio Input and Output Timings HDA_BIT_CLK HDA_SDOUT t143 t144 t143 t144 HDA_SDIN[3:0] t145 370 t146 Datasheet Electrical Characteristics Figure 8-22. Dual Channel Interface Timings tDQSL tDQS DQs tDH tDH tDS tDS DQ[7:0] Figure 8-23. Dual Channel Interface Timings DQ D Q [7 : 0 ] tDV W tDQ S Q tQ H tDQ S Q Figure 8-24. LVDS Load and Transition Times Datasheet 371 Electrical Characteristics Figure 8-25. Transmitting Position (Data to Strobe) CLKA/ CLKB Tppos0 YA/YB Tppos1 Tppos2 Tppos3 Tppos4 Tppos5 Tppos6 Figure 8-26. PCI Express Transmitter Eye 372 Datasheet Electrical Characteristics Figure 8-27. PCI Express Receiver Eye VTS-Diff = 0mV D+/D- Crossing point VRS-Diffp-p-Min>175mV .4 UI =TRX-EYE min Datasheet 373 Electrical Characteristics Figure 8-28. Measurement Points for Differential Waveforms. Differential Clock - Single Ended Measurements V max = 1.15V Clock# V max = 1.15V Vcross max = 550mV Vcross max = 550mV Vcross min = 300 mV Vcross min = 300 mV Clock V min = -0.30V V min = -0.30V Clock# Vcross delta = 140mV Vcross delta = 140mV Clock Clock# Vcross median ll fa Vcross median T Vcross median +75mV Tr i se Clock# Vcross median -75mV Clock Clock Differential Clock - Differential Measurements Clock Period (Differential ) Positive Duty Cycle (Differential ) Negative Duty Cycle (Differential ) .0V Clock-Clock# Rise Edge Rate Fall Edge Rate Vih_min = +150 mV 0.0V Vil_max = -150 mV Clock-Clock# 374 Datasheet Electrical Characteristics Figure 8-29. PCH Test Load VccME3_3 Figure 8-30. Controller Link Receive Timings t191 CL_CLK1 t190 t193 t194 CL_DATA1 Figure 8-31. Controller Link Receive Slew Rate t192 t192 CL_Vref + 50mV CL_Vref CL_CLK1 / CL_DATA1 CL_Vref - 50mV Datasheet 375 Electrical Characteristics 376 Datasheet Register and Memory Mapping 9 Register and Memory Mapping The PCH contains registers that are located in the processor's I/O space and memory space and sets of PCI configuration registers that are located in PCI configuration space. This chapter describes the PCH I/O and memory maps at the register-set level. Register access is also described. Register-level address maps and Individual register bit descriptions are provided in the following chapters. The following notations and definitions are used in the register/instruction description chapters. Datasheet RO Read Only. In some cases, if a register is read only, writes to this register location have no effect. However, in other cases, two separate registers are located at the same location where a read accesses one of the registers and a write accesses the other register. See the I/O and memory map tables for details. WO Write Only. In some cases, if a register is write only, reads to this register location have no effect. However, in other cases, two separate registers are located at the same location where a read accesses one of the registers and a write accesses the other register. See the I/O and memory map tables for details. R/W Read/Write. A register with this attribute can be read and written. R/WC Read/Write Clear. A register bit with this attribute can be read and written. However, a write of 1 clears (sets to 0) the corresponding bit and a write of 0 has no effect. R/WO Read/Write-Once. A register bit with this attribute can be written only once after power up. After the first write, the bit becomes read only. R/WL Read/Write Lockable. A register bit with the attribute can be read at any time but writes may only occur if the associated lock bit is set to unlock. If the associated lock bit is set to lock, this register bit becomes RO unless otherwise indicated. R/WLO Read/Write, Lock-Once. A register bit with this attribute can be written to the non-locked value multiple times, but to the locked value only once. After the locked value has been written, the bit becomes read only. Reserved The value of reserved bits must never be changed. For details see Section 9.2. Default When the PCH is reset, it sets its registers to predetermined default states. It is the responsibility of the system initialization software to determine configuration, operating parameters, and optional system features that are applicable, and to program the PCH registers accordingly. Bold Register bits that are highlighted in bold text indicate that the bit is implemented in the PCH. Register bits that are not implemented or are hardwired will remain in plain text. 377 Register and Memory Mapping 9.1 PCI Devices and Functions The PCH incorporates a variety of PCI devices and functions, as shown in Table 9-1. They are divided into seven logical devices for consumer SKUs. The first is the DMI-ToPCI bridge (Device 30). The second device (Device 31) contains most of the standard PCI functions that always existed in the PCI-to-ISA bridges (South Bridges), such as the Intel(R) PIIX4. The third and fourth (Device 29 and Device 26) are the USB and USB2 host controller devices. The fifth (Device 28) is PCI Express device. The sixth (Device 27) is HD Audio controller device. The seventh (Device 25) is the Gigabit Ethernet controller device. The eighth device (Device 22) is the Intel(R) Management Engine Interface (Intel(R) MEI). If for some reason, the particular system platform does not want to support any one of the Device Functions, with the exception of D30:F0 and D23:F0 can individually be disabled. The integrated Gigabit Ethernet controller will be disabled if no Platform LAN Connect component is detected (See Chapter 5.3). When a function is disabled, it does not appear at all to the software. A disabled function will not respond to any register reads or writes, insuring that these devices appear hidden to software. Table 9-1. b PCI Devices and Functions Bus:Device:Function Function Description Bus 0:Device 30:Function 0 PCI-to-PCI Bridge Bus 0:Device 31:Function 0 LPC Controller1 Bus 0:Device 31:Function 2 SATA Controller #1 Bus 0:Device 31:Function 3 SMBus Controller Bus 0:Device 31:Function 5 SATA Controller #22 Bus 0:Device 31:Function 6 Thermal Subsystem Bus 0:Device 29:Function 0 USB EHCI Controller #1 Bus 0:Device 26:Function 0 USB EHCI Controller #2 Bus 0:Device 28:Function 0 PCI Express* Port 1 Bus 0:Device 28:Function 1 PCI Express Port 2 Bus 0:Device 28:Function 2 PCI Express Port 3 Bus 0:Device 28:Function 3 PCI Express Port 4 Bus 0:Device 28:Function 4 PCI Express Port 5 Bus 0:Device 28:Function 5 PCI Express Port 6 Bus 0:Device 28:Function 6 PCI Express Port 7 Bus 0:Device 28:Function 7 PCI Express Port 8 Bus 0:Device 27:Function 0 Intel(R) High Definition Audio Controller Bus 0:Device 25:Function 0 Gigabit Ethernet Controller Bus 0:Device 22:Function 0 Intel(R) Management Engine Interface #1 Bus 0:Device 22:Function 1 Intel(R) Management Engine Interface #2 Bus 0:Device 22:Function 2 IDE-R Bus 0:Device 22:Function 3 KT NOTES: 1. The PCI-to-LPC bridge contains registers that control LPC, Power Management, System Management, GPIO, Processor Interface, RTC, Interrupts, Timers, and DMA. 2. SATA controller 2 (D31:F5) is only visible when D31:F2 CC.SCC=01h. 3. This table shows the default PCI Express Function Number-to-Root Port mapping. Function numbers for a given root port are assignable through the "Root Port Function Number and Hide for PCI Express Root Ports" register (RCBA+0404h). 4. Prior to BIOS initialization of the PCH USB subsystem, the EHCI controllers will appear as Function 7. After BIOS initialization, the EHCI controllers will be Function 0. 378 Datasheet Register and Memory Mapping 9.2 PCI Configuration Map Each PCI function on the PCH has a set of PCI configuration registers. The register address map tables for these register sets are included at the beginning of the chapter for the particular function. Configuration Space registers are accessed through configuration cycles on the PCI bus by the Host bridge using configuration mechanism #1 detailed in the PCI Local Bus Specification, Revision 2.3. Some of the PCI registers contain reserved bits. Software must deal correctly with fields that are reserved. On reads, software must use appropriate masks to extract the defined bits and not rely on reserved bits being any particular value. On writes, software must ensure that the values of reserved bit positions are preserved. That is, the values of reserved bit positions must first be read, merged with the new values for other bit positions and then written back. Note the software does not need to perform read, merge, write operation for the configuration address register. In addition to reserved bits within a register, the configuration space contains reserved locations. Software should not write to reserved PCI configuration locations in the device-specific region (above address offset 3Fh). 9.3 I/O Map The I/O map is divided into Fixed and Variable address ranges. Fixed ranges cannot be moved, but in some cases can be disabled. Variable ranges can be moved and can also be disabled. 9.3.1 Fixed I/O Address Ranges Table 9-2 shows the Fixed I/O decode ranges from the processor perspective. Note that for each I/O range, there may be separate behavior for reads and writes. DMI (Direct Media Interface) cycles that go to target ranges that are marked as "Reserved" will not be decoded by the PCH, and will be passed to PCI unless the Subtractive Decode Policy bit is set (D31:F0:Offset 42h, bit 0). If a PCI master targets one of the fixed I/O target ranges, it will be positively decoded by the PCH in medium speed. Address ranges that are not listed or marked "Reserved" are not decoded by the PCH (unless assigned to one of the variable ranges). Table 9-2. Datasheet Fixed I/O Ranges Decoded by Intel(R) PCH (Sheet 1 of 3) I/O Address Read Target Write Target Internal Unit 00h-08h DMA Controller DMA Controller DMA 09h-0Eh RESERVED DMA Controller DMA 0Fh DMA Controller DMA Controller DMA 10h-18h DMA Controller DMA Controller DMA 19h-1Eh RESERVED DMA Controller DMA 1Fh DMA Controller DMA Controller DMA 20h-21h Interrupt Controller Interrupt Controller Interrupt 24h-25h Interrupt Controller Interrupt Controller Interrupt 28h-29h Interrupt Controller Interrupt Controller Interrupt 2Ch-2Dh Interrupt Controller Interrupt Controller Interrupt 2E-2F LPC SIO LPC SIO Forwarded to LPC 379 Register and Memory Mapping Table 9-2. 380 Fixed I/O Ranges Decoded by Intel(R) PCH (Sheet 2 of 3) I/O Address Read Target Write Target Internal Unit 30h-31h Interrupt Controller Interrupt Controller Interrupt 34h-35h Interrupt Controller Interrupt Controller Interrupt Interrupt 38h-39h Interrupt Controller Interrupt Controller 3Ch-3Dh Interrupt Controller Interrupt Controller Interrupt 40h-42h Timer/Counter Timer/Counter PIT (8254) 43h RESERVED Timer/Counter PIT 4E-4F LPC SIO LPC SIO Forwarded to LPC 50h-52h Timer/Counter Timer/Counter PIT 53h RESERVED Timer/Counter PIT 60h Microcontroller Microcontroller Forwarded to LPC 61h NMI Controller NMI Controller Processor I/F 62h Microcontroller Microcontroller Forwarded to LPC 64h Microcontroller Microcontroller Forwarded to LPC 66h Microcontroller Microcontroller Forwarded to LPC 70h RESERVED1 NMI and RTC Controller RTC 71h RTC Controller RTC Controller RTC 72h RTC Controller NMI and RTC Controller RTC 73h RTC Controller RTC Controller RTC 74h RTC Controller NMI and RTC Controller RTC 75h RTC Controller RTC Controller RTC 76h RTC Controller NMI and RTC Controller RTC 77h RTC Controller RTC Controller RTC 80h DMA Controller, or LPC, or PCI DMA Controller and LPC or PCI DMA 81h-83h DMA Controller DMA Controller DMA 84h-86h DMA Controller DMA Controller and LPC or PCI DMA 87h DMA Controller DMA Controller DMA 88h DMA Controller DMA Controller and LPC or PCI DMA 89h-8Bh DMA Controller DMA Controller DMA 8Ch-8Eh DMA Controller DMA Controller and LPC or PCI DMA 08Fh DMA Controller DMA Controller DMA 90h-91h DMA Controller DMA Controller DMA 92h Reset Generator Reset Generator Processor I/F 93h-9Fh DMA Controller DMA Controller DMA A0h-A1h Interrupt Controller Interrupt Controller Interrupt A4h-A5h Interrupt Controller Interrupt Controller Interrupt A8h-A9h Interrupt Controller Interrupt Controller Interrupt ACh-ADh Interrupt Controller Interrupt Controller Interrupt B0h-B1h Interrupt Controller Interrupt Controller Interrupt B2h-B3h Power Management Power Management Power Management B4h-B5h Interrupt Controller Interrupt Controller Interrupt B8h-B9h Interrupt Controller Interrupt Controller Interrupt Datasheet Register and Memory Mapping Table 9-2. Fixed I/O Ranges Decoded by Intel(R) PCH (Sheet 3 of 3) I/O Address Read Target Write Target Internal Unit BCh-BDh Interrupt Controller Interrupt Controller Interrupt C0h-D1h DMA Controller DMA Controller DMA D2h-DDh RESERVED1 DMA Controller DMA DEh-DFh DMA Controller DMA Controller DMA F0h FERR# / Interrupt Controller FERR# / Interrupt Controller 170h-177h SATA Controller or PCI SATA Controller or PCI Forwarded to SATA 1F0h-1F7h SATA Controller or PCI SATA Controller or PCI Forwarded to SATA 200h-207h Gameport Low Gameport Low Forwarded to LPC 208h-20Fh Gameport High Gameport High Forwarded to LPC 376h SATA Controller or PCI SATA Controller or PCI Forwarded to SATA 3F6h SATA Controller or PCI SATA Controller or PCI Forwarded to SATA 4D0h-4D1h Interrupt Controller Interrupt Controller Interrupt CF9h Reset Generator Reset Generator Processor I/F Processor I/F NOTE: 1. See Section 13.7.2. Datasheet 381 Register and Memory Mapping 9.3.2 Variable I/O Decode Ranges Table 9-3 shows the Variable I/O Decode Ranges. They are set using Base Address Registers (BARs) or other configuration bits in the various PCI configuration spaces. The PNP software (PCI or ACPI) can use their configuration mechanisms to set and adjust these values. Warning: The Variable I/O Ranges should not be set to conflict with the Fixed I/O Ranges. Unpredictable results if the configuration software allows conflicts to occur. The PCH does not perform any checks for conflicts. Table 9-3. Variable I/O Decode Ranges Mappable Size (Bytes) Target ACPI Anywhere in 64 KB I/O Space 64 Power Management IDE Bus Master Anywhere in 64 KB I/O Space 1. 16 or 32 2. 16 1. SATA Host Controller #1, #2 2. IDE-R Native IDE Command Anywhere in 64 KB I/O Space1 8 1. SATA Host Controller #1, #2 2. IDE-R Native IDE Control Anywhere in 64 KB I/O Space1 4 1. SATA Host Controller #1, #2 2. IDE-R SATA Index/Data Pair Anywhere in 64 KB I/O Space 16 SATA Host Controller #1, #2 SMBus SMB Unit Range Name Anywhere in 64 KB I/O Space 32 TCO 96 Bytes above ACPI Base 32 TCO Unit GPIO Anywhere in 64 KB I/O Space 128 GPIO Unit Parallel Port 3 Ranges in 64 KB I/O Space 83 LPC Peripheral Serial Port 1 8 Ranges in 64 KB I/O Space 8 LPC Peripheral Serial Port 2 8 Ranges in 64 KB I/O Space 8 LPC Peripheral Floppy Disk Controller 2 Ranges in 64 KB I/O Space 8 LPC Peripheral LAN Anywhere in 64 KB I/O Space 322 LAN Unit LPC Generic 1 Anywhere in 64 KB I/O Space 4 to 256 LPC Peripheral LPC Generic 2 Anywhere in 64 KB I/O Space 4 to 256 LPC Peripheral LPC Generic 3 Anywhere in 64 KB I/O Space 4 to 256 LPC Peripheral LPC Generic 4 Anywhere in 64 KB I/O Space 4 to 256 LPC Peripheral I/O Trapping Ranges Anywhere in 64 KB I/O Space 1 to 256 Trap on Backbone PCI Bridge Anywhere in 64 KB I/O Space I/O Base/ Limit PCI Bridge PCI Express Root Ports Anywhere in 64 KB I/O Space I/O Base/ Limit PCI Express Root Ports 1-8 KT Anywhere in 64 KB I/O Space 8 KT NOTE: 1. 2. 3. 382 All ranges are decoded directly from DMI. The I/O cycles will not be seen on PCI, except the range associated with PCI bridge. The LAN range is typically not used, as the registers can also be accessed via a memory space. There is also an alias 400h above the parallel port range that is used for ECP parallel ports. Datasheet Register and Memory Mapping 9.4 Memory Map Table 9-4 shows (from the processor perspective) the memory ranges that the PCH decodes. Cycles that arrive from DMI that are not directed to any of the internal memory targets that decode directly from DMI will be driven out on PCI unless the Subtractive Decode Policy bit is set (D31:F0:Offset 42h, bit 0). PCI cycles generated by external PCI masters will be positively decoded unless they fall in the PCI-to-PCI bridge memory forwarding ranges (those addresses are reserved for PCI peer-to-peer traffic). If the cycle is not in the internal LAN controller's range, it will be forwarded up to DMI. Software must not attempt locks to the PCH memory-mapped I/O ranges for EHCI and HPET. If attempted, the lock is not honored which means potential deadlock conditions may occur. Table 9-4. Memory Decode Ranges from Processor Perspective (Sheet 1 of 3) Memory Range Target Dependency/Comments 0000 0000h-000D FFFFh 0010 0000h-TOM (Top of Memory) TOM registers in Host controller 000E 0000h-000E FFFFh LPC or SPI Bit 6 in BIOS Decode Enable register is set 000F 0000h-000F FFFFh LPC or SPI Bit 7 in BIOS Decode Enable register is set FEC_ _000h-FEC_ _040h IO(x) APIC inside PCH FEC1 0000h-FEC1 7FFF PCI Express* Port 1 PCI Express* Root Port 1 I/OxAPIC Enable (PAE) set FEC1 8000h-FEC1 FFFFh PCI Express* Port 2 PCI Express* Root Port 2 I/OxAPIC Enable (PAE) set FEC2 0000h-FEC2 7FFFh PCI Express* Port 3 PCI Express* Root Port 3 I/OxAPIC Enable (PAE) set FEC2 8000h-FEC2 FFFFh PCI Express* Port 4 PCI Express* Root Port 4 I/OxAPIC Enable (PAE) set FEC3 0000h-FEC3 7FFFh PCI Express* Port 5 PCI Express* Root Port 5 I/OxAPIC Enable (PAE) set FEC3 8000h-FEC3 FFFFh PCI Express* Port 6 PCI Express* Root Port 6 I/OxAPIC Enable (PAE) set FEC4 0000 - FEC4 7FFF PCI Express* Port 7 PCI Express* Root Port 7I/OxAPIC Enable (PAE) set FEC4 8000 - FEC4 FFFF PCI Express* Port 8 PCI Express* Root Port 8I/OxAPIC Enable (PAE) set FED4 0000h-FED4 BFFFh TPM on LPC FFC0 0000h-FFC7 FFFFh FF80 0000h-FF87 FFFFh FFC8 0000h-FFCF FFFFh FF88 0000h-FF8F FFFFh FFD0 0000h-FFD7 FFFFh FF90 0000h-FF97 FFFFh FFD8 0000h-FFDF FFFFh FF98 0000h-FF9F FFFFh FFE0 000h-FFE7 FFFFh FFA0 0000h-FFA7 FFFFh Datasheet Main Memory _ _is controlled using APIC Range Select (ASEL) field and APIC Enable (AEN) bit None LPC or SPI (or PCI)2 Bit 8 in BIOS Decode Enable register is set LPC or SPI (or PCI)2 Bit 9 in BIOS Decode Enable register is set LPC or SPI (or PCI)2 Bit 10 in BIOS Decode Enable register is set LPC or SPI (or PCI)2 Bit 11 in BIOS Decode Enable register is set LPC or SPI (or PCI)2 Bit 12 in BIOS Decode Enable register is set 383 Register and Memory Mapping Table 9-4. Memory Decode Ranges from Processor Perspective (Sheet 2 of 3) Memory Range FFE8 0000h-FFEF FFFFh Dependency/Comments LPC or SPI (or PCI)2 Bit 13 in BIOS Decode Enable register is set LPC or SPI (or PCI)2 Bit 14 in BIOS Decode Enable register is set LPC or SPI (or PCI)2 Always enabled. The top two, 64 KB blocks of this range can be swapped, as described in Section 9.4.1. LPC or SPI (or PCI)2 Bit 3 in BIOS Decode Enable register is set LPC or SPI (or PCI)2 Bit 2 in BIOS Decode Enable register is set LPC or SPI (or PCI)2 Hub (or PCI)2 Bit 1 in BIOS Decode Enable register is set LPC or SPI (or PCI)2 Bit 0 in BIOS Decode Enable register is set 128 KB anywhere in 4-GB range Integrated LAN Controller Enable using BAR in Device 25:Function 0 (Integrated LAN Controller MBARA) 4 KB anywhere in 4 GB range Integrated LAN Controller Enable using BAR in Device 25:Function 0 (Integrated LAN Controller MBARB) 1 KB anywhere in 4-GB range USB EHCI Controller #11 Enable using standard PCI mechanism (Device 29, Function 0) 1 KB anywhere in 4-GB range USB EHCI Controller #21 Enable using standard PCI mechanism (Device 26, Function 0) 512 B anywhere in 64-bit addressing space Intel(R) High Definition Audio Host Controller Enable using standard PCI mechanism (Device 27, Function 0) FED4 0000h-FED4 FFFFh FFA8 0000h-FFAF FFFFh FFF0 0000h-FFF7 FFFFh FFB0 0000h-FFB7 FFFFh FFF8 0000h-FFFF FFFFh FFB8 0000h-FFBF FFFFh FF70 0000h-FF7F FFFFh FF30 0000h-FF3F FFFFh FF60 0000h-FF6F FFFFh FF20 0000h-FF2F FFFFh FF50 0000h-FF5F FFFFh FF10 0000h-FF1F FFFFh FF40 0000h-FF4F FFFFh FF00 0000h-FF0F FFFFh 384 Target TPM on LPC None Memory Base/Limit anywhere in 4 GB range PCI Bridge Enable via standard PCI mechanism (Device 30: Function 0) Prefetchable Memory Base/Limit anywhere in 64-bit address range PCI Bridge Enable via standard PCI mechanism (Device 30: Function 0) 64 KB anywhere in 4 GB range LPC 32 Bytes anywhere in 64bit address range SMBus 2 KB anywhere above 64 KB to 4 GB range SATA Host Controller #1 AHCI memory-mapped registers. Enable using standard PCI mechanism (Device 31: Function 2) Memory Base/Limit anywhere in 4 GB range PCI Express Root Ports 1-8 Enable via standard PCI mechanism (Device 28: Function 0-7) Prefetchable Memory Base/Limit anywhere in 64-bit address range PCI Express Root Ports 1-8 Enable using standard PCI mechanism (Device 28: Function 0-7) 4 KB anywhere in 64-bit address range Thermal Reporting Enable using standard PCI mechanism (Device 31: Function 6 TBAR/TBARH) 4 KB anywhere in 64-bit address range Thermal Reporting Enable using standard PCI mechanism (Device 31: Function 6 TBARB/TBARBH) LPC Generic Memory Range. Enable via setting bit[0] of the LPC Generic Memory Range register (D31:F0:offset 98h). Enable using standard PCI mechanism (Device 31: Function 3) Datasheet Register and Memory Mapping Table 9-4. Memory Decode Ranges from Processor Perspective (Sheet 3 of 3) Memory Range Target Dependency/Comments 16 Bytes anywhere in 64bit address range Intel(R) MEI #1, #2 Enable using standard PCI mechanism (Device 22: Function 1:0) 4 KB anywhere in 4 GB range KT Enable using standard PCI mechanism (Device 22: Function 3) 16 KB anywhere in 4 GB range Root Complex Register Block (RCRB) Enable using setting bit[0] of the Root Complex Base Address register (D31:F0:offset F0h). FED0 X000h-FED0 X3FFh High Precision Event Timers 1 BIOS determines the "fixed" location which is one of four, 1-KB ranges where X (in the first column) is 0h, 1h, 2h, or 3h. All other PCI None NOTES: 1. Software must not attempt locks to memory mapped I/O ranges for USB EHCI or High Precision Event Timers. If attempted, the lock is not honored, which means potential deadlock conditions may occur. 2. PCI is the target when the Boot BIOS Destination selection bits are set to 10b (Chipset Config Registers:Offset 3401 bits 11:10). When PCI selected, the Firmware Hub Decode Enable bits have no effect. 9.4.1 Boot-Block Update Scheme The PCH supports a "top-block swap" mode that has the PCH swap the top block in the FWH or SPI flash (the boot block) with another location. This allows for safe update of the Boot Block (even if a power failure occurs). When the "TOP_SWAP" Enable bit is set, the PCH will invert A16 for cycles going to the upper two 64 KB blocks in the FWH or appropriate address lines as selected in Boot Block Size (BOOT_BLOCK_SIZE) soft strap for SPI. Specifically for FHW, in this mode accesses to FFFF_0000h-FFFF_FFFFh are directed to FFFE_0000h-FFFE_FFFFh and vice versa. When the Top Swap Enable bit is 0, the PCH will not invert A16. Specifically for SPI, in this mode the "Top-Block Swap" behavior is as described below. When the Top Swap Enable bit is 0, the PCH will not invert any address bit. Table 9-5 SPI Mode Address Swapping BOOT_BLOCK_SIZE Value Accesses to Being Directed to 000 (64KB) FFFF_0000h-FFFF_FFFFh 001 (128KB) FFFE_0000h-FFFF_FFFFh FFFE_0000h-FFFE_FFFFh and vice versa FFFC_0000h-FFFD_FFFFh and vice versa 010 (256KB) FFFC_0000h-FFFF_FFFFh FFF8_0000h-FFFB_FFFFh and vice versa 011 (512KB) FFF8_0000h-FFFF_FFFFh FFF0_0000h-FFF7_FFFFh and vice versa 100 (1MB) FFF0_0000h-FFFF_FFFFh FFE0_0000h-FFEF_FFFFh and vice versa 101 - 111 Reserved Reserved This bit is automatically set to 0 by RTCRST#, but not by PLTRST#. The scheme is based on the concept that the top block is reserved as the "boot" block, and the block immediately below the top block is reserved for doing boot-block updates. Datasheet 385 Register and Memory Mapping The algorithm is: 1. Software copies the top block to the block immediately below the top 2. Software checks that the copied block is correct. This could be done by performing a checksum calculation. 3. Software sets the TOP_SWAP bit. This will invert the appropriate address bits for the cycles going to the FWH or SPI. 4. Software erases the top block 5. Software writes the new top block 6. Software checks the new top block 7. Software clears the TOP_SWAP bit 8. Software sets the Top_Swap Lock-Down bit If a power failure occurs at any point after step 3, the system will be able to boot from the copy of the boot block that is stored in the block below the top. This is because the TOP_SWAP bit is backed in the RTC well. Note: The top-block swap mode may be forced by an external strapping option (See Section 2.28). When top-block swap mode is forced in this manner, the TOP_SWAP bit cannot be cleared by software. A re-boot with the strap removed will be required to exit a forced top-block swap mode. Note: Top-block swap mode only affects accesses to the Firmware Hub space, not feature space for FWH. Note: The top-block swap mode has no effect on accesses below FFFE_0000h for FWH. 386 Datasheet Chipset Configuration Registers 10 Chipset Configuration Registers This section describes all registers and base functionality that is related to chipset configuration and not a specific interface (such as LPC, PCI, or PCI Express*). It contains the root complex register block, which describes the behavior of the upstream internal link. This block is mapped into memory space, using the Root Complex Base Address (RCBA) register of the PCI-to-LPC bridge. Accesses in this space must be limited to 32-(DW) bit quantities. Burst accesses are not allowed. All chipset configuration registers are located in the core well unless otherwise indicated. 10.1 Chipset Configuration Registers (Memory Space) Note: Address locations that are not shown should be treated as Reserved (see Section 9.2 for details). . Table 10-1. Chipset Configuration Register Memory Map (Memory Space) (Sheet 1 of 3) Datasheet Offset Mnemonic 0014-0017h V0CTL 001A-001Bh Register Name Default Type VC 0 Resource Control 800000FFh R/W, RO V0STS VC 0 Resource Status 0000h RO 001C-001Fh V1CAP Virtual Channel 1 Resource Capability 00008001h R/WO, RO 0020-0023h V1CTL VC 1 Resource Control 00000000h R/W 0026-0027h V1STS VC 1 Resource Status 0000h RO 0050-0053h CIR0 Chipset Initialization Register 0 00000000h R/W 0088-008Bh CIR1 Chipset Initialization Register 1 00000000h R/WO 00AC-00AFh REC Root Error Command 0000h R/W 01A0-01A3h ILCL Internal Link Capability List 00010006h RO 01A4-01A7h LCAP Link Capabilities 00012841h RO, R/ WO 01A8-01A9h LCTL Link Control 0000h R/W 01AA-01ABh LSTS Link Status 0041h RO 0220-0223h BCR Backbone Configuration 00000000h R/W 0224-0227h RPC Root Port Configuration 0000000yh R/W, RO 0234-0327h DMIC DMI Control 00000000h R/W, RO 0238-023Bh RPFN Root Port Function Number for PCI Express Root Ports 76543210h R/WO, RO 0290-0293h FLRSTAT Function Level Reset Pending Status Summary 00000000h RO 1D40-1D47h CIR5 000000000000 0000h R/W Chipset Initialization Register 5 387 Chipset Configuration Registers Table 10-1. Chipset Configuration Register Memory Map (Memory Space) (Sheet 2 of 3) 388 Offset Mnemonic Register Name Default Type 1E00-1E03h TRSR Trap Status Register 00000000h R/WC, RO 1E10-1E17h TRCR Trapped Cycle Register 000000000000 0000h RO 1E18-1E1Fh TWDR Trapped Write Data Register 000000000000 0000h RO 1E80-1E87h IOTR0 I/O Trap Register 0 000000000000 0000h R/W 1E88-1E8Fh IOTR1 I/O Trap Register 1 000000000000 0000h R/W 1E90-1E97h IOTR2 I/O Trap Register 2 000000000000 0000h R/W 1E98-1E9Fh IOTR3 I/O Trap Register 3 000000000000 0000h R/W 2010-2013h DMC DMI Miscellaneous Control Register 00000002h R/W 2024-2027h CIR6 CIR6--Chipset Initialization Register 6 0B4030C0h R/W 2324-2327h DMC2 DMI Miscellaneous Control Register 2 0FFF0FFFh R/W 3000-3000h TCTL TCO Configuration 00h R/W 3100-3103h D31IP Device 31 Interrupt Pin 03243200h R/W, RO 3104-3107h D30IP Device 30 Interrupt Pin 00000000h RO 3108-310Bh D29IP Device 29 Interrupt Pin 10004321h R/W 310C-310Fh D28IP Device 28 Interrupt Pin 00214321h R/W 3110-3113h D27IP Device 27 Interrupt Pin 00000001h R/W 3114-3117h D26IP Device 26 Interrupt Pin 30000321h R/W 3118-311Bh D25IP Device 25 Interrupt Pin 00000001h R/W 3124-3127h D22IP Device 22 Interrupt Pin 00000001h R/W 3140-3141h D31IR Device 31 Interrupt Route 3210h R/W 3142-3143h D30IR Device 30 Interrupt Route 0000h RO 3144-3145h D29IR Device 29 Interrupt Route 3210h R/W 3146-3147h D28IR Device 28 Interrupt Route 3210h R/W 3148-3149h D27IR Device 27 Interrupt Route 3210h R/W 314C-314Fh D26IR Device 26 Interrupt Route 3210h R/W 3150-3153h D25IR Device 25 Interrupt Route 3210h R/W 3154-3157h D24IR Device 24 Interrupt Route 3210h R/W 315C-316Fh D22IR Device 22 Interrupt Route 3210h R/W 31FE-31FFh OIC Other Interrupt Control 0000h R/W 3310-3313h PRSTS Power and Reset Status 02020000h RO, R/ WC 3314-3317h CIR7 Chipset Initalization Register 7 00000000h R/W Datasheet Chipset Configuration Registers Table 10-1. Chipset Configuration Register Memory Map (Memory Space) (Sheet 3 of 3) Datasheet Offset Mnemonic 3324-3327h CIR8 3330-3333h CIR9 3340-3343h Register Name Default Type Chipset Initalization Register 8 00000000h R/W Chipset Initalization Register 9 00000000h R/W CIR10 Chipset Initalization Register 10 00000000h R/W 3350-3353h CIR13 Chipset Initalization Register 13 00000000h R/W 3368-336Bh CIR14 Chipset Initalization Register 14 00000000h R/W 3378-337Bh CIR15 Chipset Initalization Register 15 00000000h R/W 3388-338Bh CIR16 Chipset Initalization Register 16 00000000h R/W 33A0-33A3h CIR17 Chipset Initalization Register 17 00000000h R/W 33A8-33ABh CIR18 Chipset Initalization Register 18 00000000h R/W 33C0-33C3h CIR19 Chipset Initalization Register 19 00000000h R/W 33CC-33CFh CIR20 Chipset Initalization Register 20 00000000h R/W 33D0-33D3h CIR21 Chipset Initalization Register 21 00000000h R/W 33D4-33D7h CIR22 Chipset Initalization Register 22 00000000h R/W 3400-3403h RC RTC Configuration 00000000h R/W, R/WLO 3404-3407h HPTC High Precision Timer Configuration 00000000h R/W 3410-3413h GCS General Control and Status 000000yy0h R/W, R/WLO 3414-3414h BUC Backed Up Control 00h R/W 3418-341Bh FD Function Disable 00000000h R/W 341C-341Fh CG Clock Gating 00000000h R/W 3420-3420h FDSW 3428-342Bh FD2 3590-3594h 35A0-35A3h Function Disable SUS Well 00h R/W Function Disable 2 00000000h R/W MISCCTL Miscellaneous Control Register 00000000h R/W USBOCM1 USB Overcurrent MAP Register 1 00000000h R/WO 35A4-35A7h USBOCM2 USB Overcurrent MAP Register 2 00000000h R/WO 35B0-35B3h RMHWKCTL USB Remap Control 00000000h R/WO 389 Chipset Configuration Registers 10.1.1 V0CTL--Virtual Channel 0 Resource Control Register Offset Address: 0014-0017h Default Value: 80000023h Bit 31 Description Virtual Channel Enable (EN)--RO. Always set to 1. VC0 is always enabled and cannot be disabled. Reserved 26:24 Virtual Channel Identifier (ID)--RO. Indicates the ID to use for this virtual channel. 23:16 Reserved 7:1 0 Extended TC/VC Map (ETVM): Defines the upper 8-bits of the VC0 16-bit TC/VC mapping registers. These registers use the PCI Express reserved TC[3] traffic class bit. Transaction Class / Virtual Channel Map (TVM)--R/W. Indicates which transaction classes are mapped to this virtual channel. When a bit is set, this transaction class is mapped to the virtual channel. Reserved V0STS--Virtual Channel 0 Resource Status Register Offset Address: 001A-001Bh Default Value: 0000h Bit 15:2 390 R/W, RO 32-bit 30:27 15:8 10.1.2 Attribute: Size: Attribute: Size: RO 16-bit Description Reserved 1 VC Negotiation Pending (NP)--RO. When set, indicates the virtual channel is still being negotiated with ingress ports. 0 Reserved Datasheet Chipset Configuration Registers 10.1.3 V1CTL--Virtual Channel 1 Resource Control Register Offset Address: 0020-0023h Default Value: 00000000h Bit 31 Description Virtual Channel Enable (EN)--R/W. Enables the VC when set. Disables the VC when cleared. Reserved 27:24 Virtual Channel Identifier (ID)--R/W. Indicates the ID to use for this virtual channel. 23:16 Reserved 7:1 0 Extended TC/VC Map (ETVM): Defines the upper 8-bits of the VC0 16-bit TC/VC mapping registers. These registers use the PCI Express reserved TC[3] traffic class bit. Transaction Class / Virtual Channel Map (TVM)--R/W. Indicates which transaction classes are mapped to this virtual channel. When a bit is set, this transaction class is mapped to the virtual channel. Reserved V1STS--Virtual Channel 1 Resource Status Register Offset Address: 0026-0027h Default Value: 0000h Bit 15:2 10.1.5 Attribute: Size: RO 16-bit Description Reserved 1 VC Negotiation Pending (NP)--RO. When set, indicates the virtual channel is still being negotiated with ingress ports. 0 Reserved CIR0--Chipset Initialization Register 0 Offset Address: 0050-0053h Default Value: 00000000h Bit 31:0 Datasheet R/W, RO 32-bit 30:28 15:8 10.1.4 Attribute: Size: Attribute: Size: R/W 32-bit Description CIR0 Field 0--R/W. BIOS must set this field. 391 Chipset Configuration Registers 10.1.6 CIR1--Chipset Initialization Register 1 Offset Address: 0088-008Bh Default Value: 00000000h Bit 31:21 20 19:16 15 14:13 12 11:0 10.1.7 Reserved CIR1 Field 3--R/WO. BIOS must set this bit. Reserved CIR1 Field 2--R/WO. BIOS must set this bit. Reserved CIR1 Field 1--R/WO. BIOS must set this bit. Reserved REC--Root Error Command Register Attribute: Size: R/W 32-bit Bit Description 31 Drop Poisoned Downstream Packets (DPDP)--R/W. Determines how downstream packets on DMI are handled that are received with the EP field set, indicating poisoned data: 1 = This packet and all subsequent packets with data received on DMI for any VC will have their Unsupported Transaction (UT) field set causing them to master Abort downstream. Packets without data such as memory, IO and config read requests are allowed to proceed. 1 = Packets are forwarded downstream without forcing the UT field set. 30:0 Reserved ILCL--Internal Link Capabilities List Register Offset Address: 01A0-01A3h Default Value: 00010006h Bit 31:20 19:16 15:0 392 R/WO 32-bit Description Offset Address: 00AC-00AFh Default Value: 0000h 10.1.8 Attribute: Size: Attribute: Size: RO 32-bit Description Next Capability Offset (NEXT)--RO. Indicates this is the last item in the list. Capability Version (CV)--RO. Indicates the version of the capability structure. Capability ID (CID)--RO. Indicates this is capability for DMI. Datasheet Chipset Configuration Registers 10.1.9 LCAP--Link Capabilities Register Offset Address: 01A4-01A7h Default Value: 00012841h Bit 31:18 Attribute: Size: R/WO, RO 32-bit Description Reserved L1 Exit Latency (EL1)--R/WO. 000b = Less than 1 s 001b = 1 s to less than 2 s 010b = 2 s to less than 4 s 17:15 011b = 4 s to less than 8 s 100b = 8 s to less than 16 s 101b = 16 s to less than 32 s 110b = 32 s to 64 s 111b = More than 64 s 14:12 L0s Exit Latency (EL0)--R/W. This field indicates that exit latency is 128 ns to less than 256 ns. Active State Link PM Support (APMS)--R/W. Indicates the level of ASPM support on DMI. 11:10 00 = Disabled 01 = L0s entry supported 10 = Reserved 11 = L0s and L1 entry supported 10.1.10 9:4 Maximum Link Width (MLW)--RO. Indicates the maximum link width is 4 ports. 3:0 Maximum Link Speed (MLS)--RO. Indicates the link speed is 2.5 Gb/s. LCTL--Link Control Register Offset Address: 01A8-01A9h Default Value: 0000h Bit 15:8 7 6:2 Attribute: Size: R/W 16-bit Description Reserved Extended Synch (ES)--R/W. When set, forces extended transmission of FTS ordered sets when exiting L0s prior to entering L0 and extra TS1 sequences at exit from L1 prior to entering L0. Reserved Active State Link PM Control (ASPM)--R/W. Indicates whether DMI should enter L0s, L1, or both. 1:0 00 = Disabled 01 = L0s entry enabled 10 = L1 entry enabled 11 = L0s and L1 entry enabled Datasheet 393 Chipset Configuration Registers 10.1.11 LSTS--Link Status Register Offset Address: 01AA-01ABh Default Value: 0041h Bit 15:10 10.1.12 RO 16-bit Description Reserved 9:4 Negotiated Link Width (NLW)--RO. Negotiated link width is x4 (000100b). 3:0 Link Speed (LS)--RO. Link is 2.5 Gb/s. BCR--Backbone Configuration Register Offset Address: 0220-0223h Default Value: 00000000h Bit 31:7 6 10.1.13 Attribute: Size: Attribute: Size: R/W 32-bit Description Reserved BCR Field 2--R/W. BIOS must set this bit. 5:3 Reserved 2:0 BCR Field 1--R/W. BIOS program this field to 101b RPC--Root Port Configuration Register Offset Address: 0224-0227h Default Value: 0000000yh (y = 00xxb) Bit 31:12 Attribute: Size: R/W, RO 32-bit Description Reserved GBE Over PCIe Root Port Enable (GBEPCIERPEN)--RW. 11 0 = GbE MAC/PHY communication is not enabled over PCI Express. 1 = The PCI Express port selected by the GBEPCIEPORTSEL register will be used for GbE MAC/PHY over PCI Express communication The default value for this register is set by the GBE_PCIE_EN soft strap. NOTE: GbE and PCIE will use the output of this register and not the soft strap. 394 Datasheet Chipset Configuration Registers Bit Description GBE Over PCIe Root Port Select (GBEPCIERPSEL)--RW. If the GBEPCIERPEN is a `1', then this register determines which port is used for GbE MAC/PHY communication over PCI Express. This register is set by soft strap and is writable to support separate PHY on motherboard and docking station. 111 = Port 8 (Lane 7) 110 = Port 7 (Lane 6) 10:8 101 = Port 6 (Lane 5) 100 = Port 5 (Lane 4) 011 = Port 4 (Lane 3) 010 = Port 3 (Lane 2) 001 = Port 2 (Lane 1) 000 = Port 1 (Lane 0) The default value for this register is set by the GBE_PCIEPORTSEL[2:0] soft strap. NOTE: GbE and PCIE will use the output of this register and not the soft strap. High Priority Port Enable (HPE)--R/W. 7 0 = The high priority path is not enabled. 1 = The port selected by the HPP field in this register is enabled for high priority. It will be arbitrated above all other VC0 (including integrated VC0) devices. High Priority Port (HPP)--R/W. This controls which port is enabled for high priority when the HPE bit in this register is set. 111 = Port 8 110 = Port 7 6:4 101 = Port 6 100 = Port 5 101 = Port 4 010 = Port 3 001 = Port 2 000 = Port 1 Port Configuration2 (PC2)--RO. This controls how the PCI bridges are organized in various modes of operation for Ports 5-8. For the following mappings, if a port is not shown, it is considered a x1 port with no connection. This bit is set by the PCIEPCS2[1:0] soft strap. 3:2 11 = 1 x4, Port 5 (x4) 10 = 2 x2, Port 5 (x2), Port 7 (x2) 01 = 1 x2 and 2 x1s, Port 5 (x2), Port 7 (x1) and Port 8 (x1) 00 = 4 x1s, Port 5 (x1), Port 6 (x1), Port 7 (x1) and Port 8 (x1) This bit is in the resume well and is only reset by RSMRST#. Port Configuration (PC)--RO. This controls how the PCI bridges are organized in various modes of operation for Ports 1-4. For the following mappings, if a port is not shown, it is considered a x1 port with no connection. These bits are set by the PCIEPCS1[1:0] soft strap. 1:0 11 = 1 x4, Port 1 (x4) 10 = 2 x2, Port 1 (x2), Port 3 (x2) 01 = 1x2 and 2x1s, Port 1 (x2), Port 3 (x1) and Port 4 (x1) 00 = 4 x1s, Port 1 (x1), Port 2 (x1), Port 3 (x1) and Port 4 (x1) These bits are in the resume well and are only reset by RSMRST#. Datasheet 395 Chipset Configuration Registers 10.1.14 DMIC--DMI Control Register Offset Address: 0234-0237h Default Value: 00000000h Bit 31:2 1:0 10.1.15 Attribute: Size: R/W 32-bit Description Reserved DMI Clock Gate Enable (DMICGEN)--R/W. BIOS must program this field to 10b. RPFN--Root Port Function Number and Hide for PCI Express* Root Ports Register Offset Address: 0238-023Ch Default Value: 76543210h Attribute: Size: R/WO, RO 32-bit For the PCI Express root ports, the assignment of a function number to a root port is not fixed. BIOS may re-assign the function numbers on a port by port basis. This capability will allow BIOS to disable/hide any root port and still have functions 0 thru N1 where N is the total number of enabled root ports. Port numbers will remain fixed to a physical root port. The existing root port Function Disable registers operate on physical ports (not functions). Port Configuration (1x4, 4x1, etc.) is not affected by the logical function number assignment and is associated with physical ports. Bit Description 31 Root Port 8 Config Hide (RP8CH)--RW. This bit is used to hide the root port and any devices behind it from being discovered by the OS. When set to 1, the root port will not claim any downstream configuration transactions. 30:28 27 26:24 23 22:20 19 396 Root Port 8 Function Number (RP8FN)--R/WO. These bits set the function number for PCI Express Root Port 8. This root port function number must be a unique value from the other root port function numbers Root Port 7 Config Hide (RP7CH)--RW. This bit is used to hide the root port and any devices behind it from being discovered by the OS. When set to 1, the root port will not claim any downstream configuration transactions. Root Port 7 Function Number (RP7FN)--R/WO. These bits set the function number for PCI Express Root Port 7. This root port function number must be a unique value from the other root port function numbers Root Port 6 Config Hide (RP6CH)--RW. This bit is used to hide the root port and any devices behind it from being discovered by the OS. When set to 1, the root port will not claim any downstream configuration transactions. Root Port 6 Function Number (RP6FN)--R/WO. These bits set the function number for PCI Express Root Port 6. This root port function number must be a unique value from the other root port function numbers Root Port 5 Config Hide (RP5CH)--RW. This bit is used to hide the root port and any devices behind it from being discovered by the OS. When set to 1, the root port will not claim any downstream configuration transactions. Datasheet Chipset Configuration Registers Bit 18:16 15 14:12 11 10:8 7 6:4 3 2:0 10.1.16 Description Root Port 5 Function Number (RP5FN)--R/WO. These bits set the function number for PCI Express Root Port 5. This root port function number must be a unique value from the other root port function numbers Root Port 4 Config Hide (RP4CH)--RW. This bit is used to hide the root port and any devices behind it from being discovered by the OS. When set to 1, the root port will not claim any downstream configuration transactions. Root Port 4 Function Number (RP4FN)--R/WO. These bits set the function number for PCI Express Root Port 4. This root port function number must be a unique value from the other root port function numbers Root Port 3 Config Hide (RP3CH)--RW. This bit is used to hide the root port and any devices behind it from being discovered by the OS. When set to 1, the root port will not claim any downstream configuration transactions. Root Port 3 Function Number (RP3FN)--R/WO. These bits set the function number for PCI Express Root Port 3. This root port function number must be a unique value from the other root port function numbers Root Port 2 Config Hide (RP2CH)--RW. This bit is used to hide the root port and any devices behind it from being discovered by the OS. When set to 1, the root port will not claim any downstream configuration transactions. Root Port 2 Function Number (RP2FN)--R/WO. These bits set the function number for PCI Express Root Port 2. This root port function number must be a unique value from the other root port function numbers Root Port 1 Config Hide (RP1CH)--RW. This bit is used to hide the root port and any devices behind it from being discovered by the OS. When set to 1, the root port will not claim any downstream configuration transactions. Root Port 1 Function Number (RP1FN)--R/WO. These bits set the function number for PCI Express Root Port 1. This root port function number must be a unique value from the other root port function numbers FLRSTAT--FLR Pending Status Register Offset Address: 0290-0293h Default Value: 00000000h Bit 31:17 Attribute: Size: RO 32-bit Description Reserved FLR Pending Status for D29:F0, EHCI #1--R0. 16 0 = Function Level Reset is not pending. 1 = Function Level Reset is pending. FLR Pending Status for D26:F0, EHCI #2--R0. 15 0 = Function Level Reset is not pending. 1 = Function Level Reset is pending. 10:9 Reserved FLR Pending Status for D26:F0, EHCI#2--R0. 8 0 = Function Level Reset is not pending. 1 = Function Level Reset is pending. 7:0 Datasheet Reserved 397 Chipset Configuration Registers 10.1.17 CIR5--Chipset Initialization Register 5 Offset Address: 1D40h-1D47h Default Value: 0000000000000000h Bit 63:1 0 10.1.18 Attribute: Size: R/W 64-bit Description Reserved CIR5 Field 1--R/W. BIOS must program this field to 1b. TRSR--Trap Status Register Offset Address: 1E00-1E03h Default Value: 00000000h Bit 31:4 Attribute: Size: R/WC, RO 32-bit Description Reserved Cycle Trap SMI# Status (CTSS)--R/WC. These bits are set by hardware when the corresponding Cycle Trap register is enabled and a matching cycle is received (and trapped). These bits are OR'ed together to create a single status bit in the Power Management register space. 3:0 Note that the SMI# and trapping must be enabled to set these bits. These bits are set before the completion is generated for the trapped cycle, thereby ensuring that the processor can enter the SMI# handler when the instruction completes. Each status bit is cleared by writing a 1 to the corresponding bit location in this register. 10.1.19 TRCR--Trapped Cycle Register Offset Address: 1E10-1E17h Default Value: 0000000000000000h Attribute: Size: RO 64-bit This register saves information about the I/O Cycle that was trapped and generated the SMI# for software to read. Bit 63:25 Description Reserved Read/Write# (RWI)--RO. 24 23:20 Reserved 19:16 Active-high Byte Enables (AHBE)--RO. This is the DWord-aligned byte enables associated with the trapped cycle. A 1 in any bit location indicates that the corresponding byte is enabled in the cycle. 15:2 1:0 398 0 = Trapped cycle was a write cycle. 1 = Trapped cycle was a read cycle. Trapped I/O Address (TIOA)--RO. This is the DWord-aligned address of the trapped cycle. Reserved Datasheet Chipset Configuration Registers 10.1.20 TWDR--Trapped Write Data Register Offset Address: 1E18-1E1Fh Default Value: 0000000000000000h Attribute: Size: RO 64-bit This register saves the data from I/O write cycles that are trapped for software to read. Bit 63:32 31:0 10.1.21 Description Reserved Trapped I/O Data (TIOD)--RO. DWord of I/O write data. This field is undefined after trapping a read cycle. IOTRn--I/O Trap Register (0-3) Offset Address: 1E80-1E87h Register 0 1E88-1E8Fh Register 1 1E90-1E97h Register 2 1E98-1E9Fh Register 3 Default Value: 0000000000000000h Attribute: R/W Size: 64-bit These registers are used to specify the set of I/O cycles to be trapped and to enable this functionality. Bit 63:50 Description Reserved Read/Write Mask (RWM)--R/W. 49 0 = The cycle must match the type specified in bit 48. 1 = Trapping logic will operate on both read and write cycles. 48 0 = Write 1 = Read NOTE: The value in this field does not matter if bit 49 is set. Read/Write# (RWIO)--R/W. 47:40 Reserved 39:36 Byte Enable Mask (BEM)--R/W. A 1 in any bit position indicates that any value in the corresponding byte enable bit in a received cycle will be treated as a match. The corresponding bit in the Byte Enables field, below, is ignored. 35:32 Byte Enables (TBE)--R/W. Active-high DWord-aligned byte enables. 31:24 Reserved 23:18 Address[7:2] Mask (ADMA)--R/W. A 1 in any bit position indicates that any value in the corresponding address bit in a received cycle will be treated as a match. The corresponding bit in the Address field, below, is ignored. The mask is only provided for the lower 6 bits of the DWord address, allowing for traps on address ranges up to 256 bytes in size. 17:16 Reserved 15:2 1 I/O Address[15:2] (IOAD)--R/W. DWord-aligned address Reserved Trap and SMI# Enable (TRSE)--R/W. 0 Datasheet 0 = Trapping and SMI# logic disabled. 1 = The trapping logic specified in this register is enabled. 399 Chipset Configuration Registers 10.1.22 DMC--DMI Miscellaneous Control Register Offset Address: 2010-2013h Default Value: 00000002h Bit 31:20 Attribute: Size: R/W 32-bit Description Reserved DMI Misc. Control Field 1--R/W. BIOS shall always program this field. 19 0 = Disable DMI Power Savings. 1 = Enable DMI Power Savings. 18:0 10.1.23 Reserved CIR6--Chipset Initialization Register 6 Offset Address: 2024-2027h Default Value: 0B4030C0h Bit Description Reserved 23:21 (Mobile Only) CIR6 Field 2--R/W. BIOS must program this field to 011b. 20:8 (Mobile Only) Reserved 31:8 (Desktop Only) Reserved 6:0 CIR6 Field 1--R/W. BIOS must clear this bit. Reserved DMC2--DMI Miscellaneous Control Register 2 Offset Address: 2324-2327h Default Value: 0FFF0FFFh Bit Attribute: Size: R/W 32-bit Description 31:28 Reserved 27:16 DMI Misc. Control Field 2--R/W. BIOS shall always program this field. 15:0 400 R/W 32-bit 31:24 (Mobile Only) 7 10.1.24 Attribute: Size: Reserved Datasheet Chipset Configuration Registers 10.1.25 TCTL--TCO Configuration Register Offset Address: 3000-3000h Default Value: 00h Attribute: Size: Bit R/W 8-bit Description TCO IRQ Enable (IE)--R/W. 7 6:3 0 = TCO IRQ is disabled. 1 = TCO IRQ is enabled, as selected by the TCO_IRQ_SEL field. Reserved TCO IRQ Select (IS)--R/W. Specifies on which IRQ the TCO will internally appear. If not using the APIC, the TCO interrupt must be routed to IRQ9-11, and that interrupt is not sharable with the SERIRQ stream, but is shareable with other PCI interrupts. If using the APIC, the TCO interrupt can also be mapped to IRQ20-23, and can be shared with other interrupt. 2:0 000 001 010 011 100 101 110 111 = = = = = = = = IRQ 9 IRQ 10 IRQ 11 Reserved IRQ 20 (only IRQ 21 (only IRQ 22 (only IRQ 23 (only if if if if APIC APIC APIC APIC enabled) enabled) enabled) enabled) When setting the these bits, the IE bit should be cleared to prevent glitching. When the interrupt is mapped to APIC interrupts 9, 10, or 11, the APIC should be programmed for active-high reception. When the interrupt is mapped to APIC interrupts 20 through 23, the APIC should be programmed for active-low reception. Datasheet 401 Chipset Configuration Registers 10.1.26 D31IP--Device 31 Interrupt Pin Register Offset Address: 3100-3103h Default Value: 03243200h Bit 31:28 Attribute: Size: R/W, RO 32-bit Description Reserved Thermal Sensor Pin (TSIP)--R/W. Indicates which pin the Thermal Sensor controller drives as its interrupt 27:24 0h = No interrupt 1h = INTA# 2h = INTB# (Default) 3h = INTC# 4h = INTD# 5h-Fh = Reserved SATA Pin 2 (SIP2)--R/W. Indicates which pin the SATA controller 2 drives as its interrupt. 23:20 19:16 0h = No interrupt 1h = INTA# 2h = INTB# (Default) 3h = INTC# 4h = INTD# 5h-Fh = Reserved Reserved SMBus Pin (SMIP)--R/W. Indicates which pin the SMBus controller drives as its interrupt. 15:12 0h = No interrupt 1h = INTA# 2h = INTB# (Default) 3h = INTC# 4h = INTD# 5h-Fh = Reserved SATA Pin (SIP)--R/W. Indicates which pin the SATA controller drives as its interrupt. 11:8 402 0h = No interrupt 1h = INTA# 2h = INTB# (Default) 3h = INTC# 4h = INTD# 5h-Fh = Reserved 7:4 Reserved 3:0 LPC Bridge Pin (LIP)--RO. Currently, the LPC bridge does not generate an interrupt, so this field is read-only and 0. Datasheet Chipset Configuration Registers 10.1.27 D30IP--Device 30 Interrupt Pin Register Offset Address: 3104-3107h Default Value: 00000000h Bit 31:4 3:0 10.1.28 Attribute: Size: RO 32-bit Description Reserved PCI Bridge Pin (PIP)--RO. Currently, the PCI bridge does not generate an interrupt, so this field is read-only and 0. D29IP--Device 29 Interrupt Pin Register Offset Address: 3108-310Bh Default Value: 10004321h Bit 31:4 Attribute: Size: R/W 32-bit Description Reserved EHCI #1 Pin (E1P)--R/W. Indicates which pin the EHCI controller #1 drives as its interrupt, if controller exists. 0h = No interrupt 1h = INTA# (Default) 3:0 2h = INTB# 3h = INTC# 4h = INTD# 5h-7h = Reserved NOTE: EHCI Controller #1 is mapped to Device 29 Function 0 when RMH is enabled. Datasheet 403 Chipset Configuration Registers 10.1.29 D28IP--Device 28 Interrupt Pin Register Offset Address: 310C-310Fh Default Value: 00214321h Bit Attribute: Size: R/W 32-bit Description PCI Express* #8 Pin (P8IP)--R/W. Indicates which pin the PCI Express* port #8 drives as its interrupt. 31:28 0h = No interrupt 1h = INTA# 2h = INTB# (Default) 3h = INTC# 4h = INTD# 5h-7h = Reserved PCI Express #7 Pin (P7IP)--R/W. Indicates which pin the PCI Express port #7 drives as its interrupt. 27:24 0h = No interrupt 1h = INTA# (Default) 2h = INTB# 3h = INTC# 4h = INTD# 5h-7h = Reserved PCI Express* #6 Pin (P6IP)--R/W. Indicates which pin the PCI Express* port #6 drives as its interrupt. 23:20 0h = No interrupt 1h = INTA# 2h = INTB# (Default) 3h = INTC# 4h = INTD# 5h-7h = Reserved PCI Express #5 Pin (P5IP)--R/W. Indicates which pin the PCI Express port #5 drives as its interrupt. 19:16 0h = No interrupt 1h = INTA# (Default) 2h = INTB# 3h = INTC# 4h = INTD# 5h-7h = Reserved PCI Express #4 Pin (P4IP)--R/W. Indicates which pin the PCI Express* port #4 drives as its interrupt. 15:12 0h = No interrupt 1h = INTA# 2h = INTB# 3h = INTC# 4h = INTD# (Default) 5h-7h = Reserved PCI Express #3 Pin (P3IP)--R/W. Indicates which pin the PCI Express port #3 drives as its interrupt. 11:8 404 0h = No interrupt 1h = INTA# 2h = INTB# 3h = INTC# (Default) 4h = INTD# 5h-7h = Reserved Datasheet Chipset Configuration Registers Bit Description PCI Express #2 Pin (P2IP)--R/W. Indicates which pin the PCI Express port #2 drives as its interrupt. 7:4 0h = No interrupt 1h = INTA# 2h = INTB# (Default) 3h = INTC# 4h = INTD# 5h-7h = Reserved PCI Express #1 Pin (P1IP)--R/W. Indicates which pin the PCI Express port #1 drives as its interrupt. 3:0 10.1.30 0h = No interrupt 1h = INTA# (Default) 2h = INTB# 3h = INTC# 4h = INTD# 5h-7h = Reserved D27IP--Device 27 Interrupt Pin Register Offset Address: 3110-3113h Default Value: 00000001h Bit 31:4 Attribute: Size: R/W 32-bit Description Reserved Intel(R) High Definition Audio Pin (ZIP)--R/W. Indicates which pin the Intel(R) High Definition Audio controller drives as its interrupt. 0h = No interrupt 3:0 1h = INTA# (Default) 2h = INTB# 3h = INTC# 4h = INTD# 5h-Fh = Reserved Datasheet 405 Chipset Configuration Registers 10.1.31 D26IP--Device 26 Interrupt Pin Register Offset Address: 3114-3117h Default Value: 30000321h Bit 31:4 Attribute: Size: R/W 32-bit Description Reserved EHCI #2 Pin (E2P)--R/W. Indicates which pin EHCI controller #2 drives as its interrupt, if controller exists. 3:0 10.1.32 0h = No Interrupt 1h = INTA# (Default) 2h = INTB# 3h = INTC# 4h = INTD# 5h-Fh = Reserve NOTE: EHCI Controller #2 is mapped to Device 26 Function 0 when RMH is enabled and Device 26 function 7 when RMH is disabled. D25IP--Device 25 Interrupt Pin Register Offset Address: 3118-311Bh Default Value: 00000001h Bit 31:4 Attribute: Size: R/W 32-bit Description Reserved GBE LAN Pin (LIP)--R/W. Indicates which pin the internal GbE LAN controller drives as its interrupt 3:0 406 0h = No Interrupt 1h = INTA# (Default) 2h = INTB# 3h = INTC# 4h = INTD# 5h-Fh = Reserved Datasheet Chipset Configuration Registers 10.1.33 D22IP--Device 22 Interrupt Pin Register Offset Address: 3124-3127h Default Value: 00000001h Bit 31:16 Attribute: Size: R/W 32-bit Description Reserved KT Pin (KTIP)--R/W. Indicates which pin the Keyboard text PCI functionality drives as its interrupt 15:12 0h = No Interrupt 1h = INTA# 2h = INTB# 3h = INTC# 4h = INTD# 5h-Fh = Reserved IDE-R Pin (IDERIP)--R/W. Indicates which pin the IDE Redirect PCI functionality drives as its interrupt 11:8 0h = No Interrupt 1h = INTA# 2h = INTB# 3h = INTC# 4h = INTD# 5h-Fh = Reserved Intel(R) MEI #2 Pin (MEI2IP)--R/W. Indicates which pin the Management Engine Interface #2 drives as its interrupt 7:4 0h = No Interrupt 1h = INTA# 2h = INTB# 3h = INTC# 4h = INTD# 5h-Fh = Reserved Intel(R) MEI #1 Pin (MEI1IP)--R/W. Indicates which pin the Management Engine Interface controller #1 drives as its interrupt 3:0 10.1.34 0h = No Interrupt 1h = INTA# 2h = INTB# 3h = INTC# 4h = INTD# 5h-Fh = Reserved D31IR--Device 31 Interrupt Route Register Offset Address: 3140-3141h Default Value: 3210h Bit 15 Datasheet Attribute: Size: R/W 16-bit Description Reserved 407 Chipset Configuration Registers Bit Description Interrupt D Pin Route (IDR)--R/W. Indicates which physical pin on the PCH is connected to the INTD# pin reported for device 31 functions. 14:12 11 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# PIRQD# (Default) PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt C Pin Route (ICR)--R/W. Indicates which physical pin on the PCH is connected to the INTC# pin reported for device 31 functions. 10:8 7 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# (Default) PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt B Pin Route (IBR)--R/W. Indicates which physical pin on the PCH is connected to the INTB# pin reported for device 31 functions. 6:4 3 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# (Default) PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt A Pin Route (IAR)--R/W. Indicates which physical pin on the PCH is connected to the INTA# pin reported for device 31 functions. 2:0 10.1.35 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# (Default) PIRQB# PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# D30IR--Device 30 Interrupt Route Register Offset Address: 3142-3143h Default Value: 0000h Bit 15:0 408 Attribute: Size: RO 16-bit Description Reserved. No interrupts generated from Device 30. Datasheet Chipset Configuration Registers 10.1.36 D29IR--Device 29 Interrupt Route Register Offset Address: 3144-3145h Default Value: 3210h Bit 15 Attribute: Size: R/W 16-bit Description Reserved Interrupt D Pin Route (IDR)--R/W. Indicates which physical pin on the PCH is connected to the INTD# pin reported for device 29 functions. 14:12 11 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# PIRQD# (Default) PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt C Pin Route (ICR)--R/W. Indicates which physical pin on the PCH is connected to the INTC# pin reported for device 29 functions. 10:8 7 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# (Default) PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt B Pin Route (IBR)--R/W. Indicates which physical pin on the PCH is connected to the INTB# pin reported for device 29 functions. 6:4 3 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# (Default) PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt A Pin Route (IAR)--R/W. Indicates which physical pin on the PCH is connected to the INTA# pin reported for device 29 functions. 2:0 Datasheet 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# (Default) PIRQB# PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# 409 Chipset Configuration Registers 10.1.37 D28IR--Device 28 Interrupt Route Register Offset Address: 3146-3147h Default Value: 3210h Bit 15 Attribute: Size: R/W 16-bit Description Reserved Interrupt D Pin Route (IDR)--R/W. Indicates which physical pin on the PCH is connected to the INTD# pin reported for device 28 functions. 14:12 11 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# PIRQD# (Default) PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt C Pin Route (ICR)--R/W. Indicates which physical pin on the PCH is connected to the INTC# pin reported for device 28 functions. 10:8 7 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# (Default) PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt B Pin Route (IBR)--R/W. Indicates which physical pin on the PCH is connected to the INTB# pin reported for device 28 functions. 6:4 3 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# (Default) PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt A Pin Route (IAR)--R/W. Indicates which physical pin on the PCH is connected to the INTA# pin reported for device 28 functions. 2:0 410 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# (Default) PIRQB# PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Datasheet Chipset Configuration Registers 10.1.38 D27IR--Device 27 Interrupt Route Register Offset Address: 3148-3149h Default Value: 3210h Bit 15 Attribute: Size: R/W 16-bit Description Reserved Interrupt D Pin Route (IDR)--R/W. Indicates which physical pin on the PCH is connected to the INTD# pin reported for device 27 functions. 14:12 11 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# PIRQD# (Default) PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt C Pin Route (ICR)--R/W. Indicates which physical pin on the PCH is connected to the INTC# pin reported for device 27 functions. 10:8 7 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# (Default) PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt B Pin Route (IBR)--R/W. Indicates which physical pin on the PCH is connected to the INTB# pin reported for device 27 functions. 6:4 3 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# (Default) PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt A Pin Route (IAR)--R/W. Indicates which physical pin on the PCH is connected to the INTA# pin reported for device 27 functions. 2:0 Datasheet 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# (Default) PIRQB# PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# 411 Chipset Configuration Registers 10.1.39 D26IR--Device 26 Interrupt Route Register Offset Address: 314C-314Fh Default Value: 3210h Bit 15 Attribute: Size: R/W 16-bit Description Reserved Interrupt D Pin Route (IDR)--R/W. Indicates which physical pin on the PCH is connected to the INTD# pin reported for device 26 functions: 14:12 11 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# PIRQD# (Default) PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt C Pin Route (ICR)--R/W. Indicates which physical pin on the PCH is connected to the INTC# pin reported for device 26 functions. 10:8 7 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# (Default) PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt B Pin Route (IBR)--R/W. Indicates which physical pin on the PCH is connected to the INTB# pin reported for device 26 functions. 6:4 3 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# (Default) PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt A Pin Route (IAR)--R/W. Indicates which physical pin on the PCH is connected to the INTA# pin reported for device 26 functions. 0h = PIRQA# (Default) 2:0 412 1h 2h 3h 4h 5h 6h 7h = = = = = = = PIRQB# PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Datasheet Chipset Configuration Registers 10.1.40 D25IR--Device 25 Interrupt Route Register Offset Address: 3150-3151h Default Value: 3210h Bit 15 Attribute: Size: R/W 16-bit Description Reserved Interrupt D Pin Route (IDR)--R/W. Indicates which physical pin on the PCH is connected to the INTD# pin reported for device 25 functions: 14:12 11 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# PIRQD# (Default) PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt C Pin Route (ICR)--R/W. Indicates which physical pin on the PCH is connected to the INTC# pin reported for device 25 functions. 10:8 7 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# (Default) PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt B Pin Route (IBR)--R/W. Indicates which physical pin on the PCH is connected to the INTB# pin reported for device 25 functions. 6:4 3 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# (Default) PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt A Pin Route (IAR)--R/W. Indicates which physical pin on the PCH is connected to the INTA# pin reported for device 25 functions. 2:0 Datasheet 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# (Default) PIRQB# PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# 413 Chipset Configuration Registers 10.1.41 D24IR--Device 24 Interrupt Route Register Offset Address: 3154-3155h Default Value: 3210h Bit 15 Attribute: Size: R/W 16-bit Description Reserved Interrupt D Pin Route (IDR)--R/W. Indicates which physical pin on the PCH is connected to the INTD# pin reported for device 24 functions: 14:12 11 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# PIRQD# (Default) PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt C Pin Route (ICR)--R/W. Indicates which physical pin on the PCH is connected to the INTC# pin reported for device 24 functions. 10:8 7 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# (Default) PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt B Pin Route (IBR)--R/W. Indicates which physical pin on the PCH is connected to the INTB# pin reported for device 24 functions. 6:4 3 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# (Default) PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt A Pin Route (IAR)--R/W. Indicates which physical pin on the PCH is connected to the INTA# pin reported for device 24 functions. 2:0 414 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# (Default) PIRQB# PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Datasheet Chipset Configuration Registers 10.1.42 D22IR--Device 22 Interrupt Route Register Offset Address: 315C-315Fh Default Value: 3210h Bit 15 Attribute: Size: R/W 16-bit Description Reserved Interrupt D Pin Route (IDR)--R/W. Indicates which physical pin on the PCH is connected to the INTD# pin reported for device 22 functions: 14:12 11 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# PIRQD# (Default) PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt C Pin Route (ICR)--R/W. Indicates which physical pin on the PCH is connected to the INTC# pin reported for device 22 functions. 10:8 7 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# PIRQC# (Default) PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt B Pin Route (IBR)--R/W. Indicates which physical pin on the PCH is connected to the INTB# pin reported for device 22 functions. 6:4 3 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# PIRQB# (Default) PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# Reserved Interrupt A Pin Route (IAR)--R/W. Indicates which physical pin on the PCH is connected to the INTA# pin reported for device 22 functions. 2:0 Datasheet 0h 1h 2h 3h 4h 5h 6h 7h = = = = = = = = PIRQA# (Default) PIRQB# PIRQC# PIRQD# PIRQE# PIRQF# PIRQG# PIRQH# 415 Chipset Configuration Registers 10.1.43 OIC--Other Interrupt Control Register Offset Address: 31FE-31FFh Default Value: 0000h Bit 15:10 Attribute: Size: R/W 16-bit Description Reserved Coprocessor Error Enable (CEN)--R/W. 9 0 = FERR# will not generate IRQ13 nor IGNNE#. 1 = If FERR# is low, the PCH generates IRQ13 internally and holds it until an I/O port F0h write. It will also drive IGNNE# active. APIC Enable (AEN)--R/W. 8 7:0 0 = The internal IOxAPIC is disabled. 1 = Enables the internal IOxAPIC and its address decode. NOTE: Software should read this register after modifying APIC enable bit prior to access to the IOxAPIC address range. APIC Range Select (ASEL)--R/W.These bits define address bits 19:12 for the IOxAPIC range. The default value of 00h enables compatibility with prior PCH products as an initial value. This value must not be changed unless the IOxAPIC Enable bit is cleared. NOTE: FEC10000h-FEC4FFFFh is allocated to PCIe when I/OxApic Enable (PAE) bit is set. 416 Datasheet Chipset Configuration Registers 10.1.44 PRSTS--Power and Reset Status Offset Address: 3310-3313h Default Value: 02020000h Bit Attribute: Size: RO, R/WC 32-bit Description 31:16 15 14:7 6 Reserved Power Management Watchdog Timer--R/WC. This bit is set when the Power Management watchdog timer causes a global reset. Reserved Intel(R) Management Engine Watchdog Timer Status--R/WC. This bit is set when the Intel Management Engine watchdog timer causes a global reset. Wake On Lan Override Wake Status (WOL_OVR_WK_STS)--R/WC. This bit gets set when all of the following conditions are met: * Integrated LAN Signals a Power Management Event 5 * The system is not in S0 * The "WOL Enable Override" bit is set in configuration space. BIOS can read this status bit to determine this wake source. Software clears this bit by writing a 1 to it. 10.1.45 4 Reserved 3 ME Host Power Down (ME_HOST_PWRDN)--R/WC.This bit is set when the Intel Management Engine generates a host reset with power down. 2 ME Host Reset Warm Status (ME_HRST_WARM_STS)--R/WC. This bit is set when the Intel(R) Management Engine generates a Host reset without power cycling. Software clears this bit by writing a 1 to this bit position. 1 ME Host Reset Cold Status (ME_HRST_COLD_STS)--R/WC. This bit is set when the Intel Management Engine generates a Host reset with power cycling. Software clears this bit by writing a 1 to this bit position. 0 ME WAKE STATUS (ME_WAKE_STS)--R/WC. This bit is set when the Intel Management Engine generates a Non-Maskable wake event, and is not affected by any other enable bit. When this bit is set, the Host Power Management logic wakes to S0. CIR7--Chipset Initalization Register 7 Offset Address: 3314-3317h Default Value: 00000000h Bit 31:4 3:0 Datasheet Attribute: Size: R/W 32-bit Description Reserved CIR7 Field 1--R/W. BIOS must program this field to 1111b. 417 Chipset Configuration Registers 10.1.46 CIR8--Chipset Initialization Register 8 Offset Address: 3324-3327h Default Value: 00000000h Bit 31:0 10.1.47 CIR8 Field 1--R/W. BIOS must program this field to 04000000h. CIR9--Chipset Initialization Register 9 Bit 31:0 CIR10--Chipset Initialization Register 10 31:0 Attribute: Size: R/W 32-bit Description CIR10 Field 1--R/W. BIOS must program this field to 00000000h for Intel(R) CoreTM i5 processor-based systems. CIR13--Chipset Initialization Register 13 Offset Address: 3350-3353h Default Value: 00000000h Bit 31:0 Attribute: Size: R/W 32-bit Description CIR13 Field 1--R/W. BIOS must program this field to 000FFFFFh for Intel(R) CoreTM i5 processorbased systems. CIR14--Chipset Initialization Register 14 Offset Address: 3368-336Bh Default Value: 00000000h Bit 31:0 418 R/W 32-bit CIR9 Field 1--R/W. BIOS must program this field to 00000000h. Bit 10.1.50 Attribute: Size: Description Offset Address: 3340-3343h Default Value: 00000000h 10.1.49 R/W 32-bit Description Offset Address: 3330-3333h Default Value: 00000000h 10.1.48 Attribute: Size: Attribute: Size: R/W 32-bit Description CIR14 Field 1--R/W. BIOS must program this field to 00061080h for Intel(R) CoreTM i5 processor-based systems. Datasheet Chipset Configuration Registers 10.1.51 CIR15--Chipset Initialization Register 15 Offset Address: 3378-337Bh Default Value: 00000000h Bit 31:0 10.1.52 CIR15 Field 1--R/W. BIOS must program this field to 00000000h for Intel(R) CoreTM i5 processor-based systems. CIR16--Chipset Initialization Register 16 Bit 31:0 CIR17--Chipset Initialization Register 17 31:0 Attribute: Size: R/W 32-bit Description CIR17 Field 1--R/W. BIOS must program this field to 00000000h for Intel(R) CoreTM i5 processor-based systems. CIR18--Chipset Initialization Register 18 Offset Address: 33A8-33ABh Default Value: 00000000h Bit 31:0 Attribute: Size: R/W 32-bit Description CIR18 Field 1--R/W. BIOS must program this field to 00003900 for Intel(R) CoreTM i5 processor-based systems. CIR19--Chipset Initialization Register 19 Offset Address: 33C0-33C3h Default Value: 00000000h Bit 31:0 Datasheet R/W 32-bit CIR16 Field 1--R/W. BIOS must program this field to 7F8F9F80h for Intel(R) CoreTM i5 processor-based systems. Bit 10.1.55 Attribute: Size: Description Offset Address: 33A0-33A3h Default Value: 00000000h 10.1.54 R/W 32-bit Description Offset Address: 3388-338Bh Default Value: 00000000h 10.1.53 Attribute: Size: Attribute: Size: R/W 32-bit Description CIR19 Field 1--R/W. BIOS must program this field to 00020002h for Intel(R) CoreTM i5 processor-based systems. 419 Chipset Configuration Registers 10.1.56 CIR20--Chipset Initialization Register 20 Offset Address: 33CC-33CFh Default Value: 00000000h Bit 31:0 10.1.57 CIR20 Field 1--R/W. BIOS must program this field to 00044B00h for Intel(R) CoreTM i5 processor-based systems. CIR21--Chipset Initialization Register 21 Bit 31:0 Attribute: Size: R/W 32-bit Description CIR21 Field 1--R/W. BIOS must program this field to 00002000h for Intel(R) CoreTM i5 processor-based systems. CIR22--Chipset Initialization Register 22 Offset Address: 33D4-33D7h Default Value: 00000000h Bit 31:0 420 R/W 32-bit Description Offset Address: 33D0-33D3h Default Value: 00000000h 10.1.58 Attribute: Size: Attribute: Size: R/W 32-bit Description CIR22 Field 1--R/W. BIOS must program this field to 00020000h for Intel(R) CoreTM i5 processor-based systems. Program this register after all registers in the 3330-33D3 range and D31:F0:A9h are already programmed. Datasheet Chipset Configuration Registers 10.1.59 RC--RTC Configuration Register Offset Address: 3400-3403h Default Value: 00000000h Bit Attribute: Size: R/W, R/WLO 32-bit Description 31:5 Reserved Upper 128 Byte Lock (UL)--R/WLO. 4 0 = Bytes not locked. 1 = Bytes 38h-3Fh in the upper 128-byte bank of RTC RAM are locked and cannot be accessed. Writes will be dropped and reads will not return any ensured data. Bit reset on system reset. Lower 128 Byte Lock (LL)--R/WLO. 3 0 = Bytes not locked. 1 = Bytes 38h-3Fh in the lower 128-byte bank of RTC RAM are locked and cannot be accessed. Writes will be dropped and reads will not return any ensured data. Bit reset on system reset. Upper 128 Byte Enable (UE)--R/W. 2 1:0 10.1.60 0 = Bytes locked. 1 = The upper 128-byte bank of RTC RAM can be accessed. Reserved HPTC--High Precision Timer Configuration Register Offset Address: 3404-3407h Default Value: 00000000h Bit 31:8 Attribute: Size: R/W 32-bit Description Reserved Address Enable (AE)--R/W. 7 6:2 0 = Address disabled. 1 = The PCH will decode the High Precision Timer memory address range selected by bits 1:0 below. Reserved Address Select (AS)--R/W. This 2-bit field selects 1 of 4 possible memory address ranges for the High Precision Timer functionality. The encodings are: 1:0 00 = FED0_0000h-FED0_03FFh 01 = FED0_1000h-FED0_13FFh 10 = FED0_2000h-FED0_23FFh 11 = FED0_3000h-FED0_33FFh Datasheet 421 Chipset Configuration Registers 10.1.61 GCS--General Control and Status Register Offset Address: 3410-3413h Attribute: Default Value: 00000yy0h (yy = xx0000x0b)Size: Bit 31:13 R/W, R/WLO 32-bit Description Reserved Function Level Reset Capability Structure Select (FLRCSSEL)--R/W. 12 0 = Function Level Reset (FLR) will use the standard capability structure with unique capability ID assigned by PCISIG. 1 = Vendor Specific Capability Structure is selected for FLR. Boot BIOS Straps (BBS)--R/W. This field determines the destination of accesses to the BIOS memory range. The default values for these bits represent the strap values of GNT1# /GPIO51 (bit 11) at the rising edge of PWROK and GNT0# (bit 10) at the rising edge of PWROK. Bits 11:10 00b 01 11:10 Description LPC RESERVED 10b PCI 11b SPI When PCI is selected, the top 16 MB of memory below 4 GB (FF00_0000h to FFFF_FFFFh) is accepted by the primary side of the PCI P2P bridge and forwarded to the PCI bus. This allows systems with corrupted or unprogrammed flash to boot from a PCI device. The PCI-to-PCI bridge Memory Space Enable bit does not need to be set (nor any other bits) for these cycles to go to PCI. Note that BIOS decode range bits and the other BIOS protection bits have no effect when PCI is selected. This functionality is intended for debug/testing only. When SPI or LPC is selected, the range that is decoded is further qualified by other configuration bits described in the respective sections. The value in this field can be overwritten by software as long as the BIOS Interface Lock-Down (bit 0) is not set. NOTE: Booting to PCI is intended for debug/testing only. Boot BIOS Destination Select to LPC/PCI by functional strap or using Boot BIOS Destination Bit will not affect SPI accesses initiated by Intel(R) Management Engine or Integrated GbE LAN. Server Error Reporting Mode (SERM)--R/W. 9 8:7 0 = The PCH is the final target of all errors. The Processor sends a messages to the PCH for the purpose of generating NMI. 1 = The Processor is the final target of all errors from PCI Express* and DMI. In this mode, if the PCH detects a fatal, non-fatal, or correctable error on DMI or its downstream ports, it sends a message to the Processor. If the PCH receives an ERR_* message from the downstream port, it sends that message to the Processor. Reserved FERR# MUX Enable (FME)--R/W. This bit enables FERR# to be a processor break event indication. 6 0 = Disabled. 1 = The PCH examines FERR# during a C2, C3, or C4 state as a break event. See Chapter 5.13.4 for a functional description. 422 Datasheet Chipset Configuration Registers Bit 5 Description No Reboot (NR)--R/W. This bit is set when the "No Reboot" strap (SPKR pin on the PCH) is sampled high on PWROK. This bit may be set or cleared by software if the strap is sampled low but may not override the strap when it indicates "No Reboot". 0 = System will reboot upon the second timeout of the TCO timer. 1 = The TCO timer will count down and generate the SMI# on the first timeout, but will not reboot on the second timeout. Alternate Access Mode Enable (AME)--R/W. 4 0 = Disabled. 1 = Alternate access read only registers can be written, and write only registers can be read. Before entering a low power state, several registers from powered down parts may need to be saved. In the majority of cases, this is not an issue, as registers have read and write paths. However, several of the ISA compatible registers are either read only or write only. To get data out of write-only registers, and to restore data into read-only registers, the PCH implements an alternate access mode. For a list of these registers see Section 5.13.10. Shutdown Policy Select (SPS)--R/W. 3 0 = PCH will drive INIT# in response to the shutdown Vendor Defined Message (VDM). (default) 1 = PCH will treat the shutdown VDM similar to receiving a CF9h I/O write with data value06h, and will drive PLTRST# active. Reserved Page Route (RPR)--R/W. Determines where to send the reserved page registers. These addresses are sent to PCI or LPC for the purpose of generating POST codes. The I/O addresses modified by this field are: 80h, 84h, 85h, 86h, 88h, 8Ch, 8Dh, and 8Eh. 2 0 = Writes will be forwarded to LPC, shadowed within the PCH, and reads will be returned from the internal shadow 1 = Writes will be forwarded to PCI, shadowed within the PCH, and reads will be returned from the internal shadow. NOTE: if some writes are done to LPC/PCI to these I/O ranges, and then this bit is flipped, such that writes will now go to the other interface, the reads will not return what was last written. Shadowing is performed on each interface. The aliases for these registers, at 90h, 94h, 95h, 96h, 98h, 9Ch, 9Dh, and 9Eh, are always decoded to LPC. 1 Reserved BIOS Interface Lock-Down (BILD)--R/WLO. 0 Datasheet 0 = Disabled. 1 = Prevents BUC.TS (offset 3414, bit 0) and GCS.BBS (offset 3410h, bits 11:10) from being changed. This bit can only be written from 0 to 1 once. 423 Chipset Configuration Registers 10.1.62 BUC--Backed Up Control Register Offset Address: 3414-3414h Default Value: 0000000xb Attribute: Size: R/W 8-bit All bits in this register are in the RTC well and only cleared by RTCRST# Bit 7:6 Description Reserved LAN Disable--R/W. 0 = LAN is Enabled 1 = LAN is Disabled. 5 Changing the internal GbE controller from disabled to enabled requires a system reset (write of 0Eh to CF9h (RST_CNT Register)) immediately after clearing the LAN disable bit. A reset is not required if changing the bit from enabled to disabled. This bit is locked by the Function Disable SUS Well Lockdown register. Once locked this bit can not be changed by software. Daylight Savings Override (SDO)--R/W. 4 3:1 0 = Daylight Savings is Enabled. 1 = The DSE bit in RTC Register B is set to Read-only with a value of 0 to disable daylight savings. Reserved Top Swap (TS)--R/W. 0 = PCH will not invert A16. 1 = PCH will invert A16, A17, or A18 for cycles going to the BIOS space . 0 If booting from LPC (FWH), then the boot-block size is 64 KB and A16 is inverted if Top Swap is enabled. If booting from SPI, then the BIOS Boot-Block size soft strap determines if A16, A17, or A18 should be inverted if Top Swap is enabled. If PCH is strapped for Top-Swap (GNT3#/GPIO55 is low at rising edge of PWROK), then this bit cannot be cleared by software. The strap jumper should be removed and the system rebooted. 424 Datasheet Chipset Configuration Registers 10.1.63 FD--Function Disable Register Offset Address: 3418-341Bh Default Value: See bit description Attribute: Size: R/W 32-bit When disabling a function, only the configuration space is disabled. Software must ensure that all functionality within a controller that is not desired (such as memory spaces, I/O spaces, and DMA engines) is disabled prior to disabling the function. When a function is disabled, software must not attempt to re-enable it. A disabled function can only be re-enabled by a platform reset. Bit 31:26 Description Reserved Serial ATA Disable 2 (SAD2)--R/W. Default is 0. 25 0 = The SATA controller #2 (D31:F5) is enabled. 1 = The SATA controller #2 (D31:F5) is disabled. 24 0 = Thermal Sensor Registers (D31:F6) are enabled. 1 = Thermal Sensor Registers (D31:F6) are disabled. Thermal Sensor Registers Disable (TTD)--R/W. Default is 0. 23 22 21 20 PCI Express* 8 Disable (PE8D)--R/W. Default is 0. When disabled, the link for this port is put into the "link down" state. 0 = PCI Express* port #8 is enabled. 1 = PCI Express port #8 is disabled. PCI Express 7 Disable (PE7D)--R/W. Default is 0. When disabled, the link for this port is put into the link down state. 0 = PCI Express port #7 is enabled. 1 = PCI Express port #7 is disabled. PCI Express* 6 Disable (PE6D)--R/W. Default is 0. When disabled, the link for this port is put into the "link down" state. 0 = PCI Express* port #6 is enabled. 1 = PCI Express port #6 is disabled. PCI Express 5 Disable (PE5D)--R/W. Default is 0. When disabled, the link for this port is put into the link down state. 0 = PCI Express port #5 is enabled. 1 = PCI Express port #5 is disabled. PCI Express 4 Disable (PE4D)--R/W. Default is 0. When disabled, the link for this port is put into the "link down" state. 19 0 = PCI Express port #4 is enabled. 1 = PCI Express port #4 is disabled. NOTE: This bit must be set when Port 1 is configured as a x4. PCI Express 3 Disable (PE3D)--R/W. Default is 0. When disabled, the link for this port is put into the link down state. 18 0 = PCI Express port #3 is enabled. 1 = PCI Express port #3 is disabled. NOTE: This bit must be set when Port 1 is configured as a x4. PCI Express 2 Disable (PE2D)--R/W. Default is 0. When disabled, the link for this port is put into the link down state. 17 Datasheet 0 = PCI Express port #2 is enabled. 1 = PCI Express port #2 is disabled. NOTE: This bit must be set when Port 1 is configured as a x4 or a x2. 425 Chipset Configuration Registers Bit 16 Description PCI Express 1 Disable (PE1D)--R/W. Default is 0. When disabled, the link for this port is put into the link down state. 0 = PCI Express port #1 is enabled. 1 = PCI Express port #1 is disabled. EHCI #1 Disable (EHCI1D)--R/W. Default is 0. 15 0 = The EHCI #1 is enabled. 1 = The EHCI #1 is disabled. LPC Bridge Disable (LBD)--R/W. Default is 0. 0 = The LPC bridge is enabled. 1 = The LPC bridge is disabled. Unlike the other disables in this register, the following additional spaces will no longer be decoded by the LPC bridge: 14 * * Memory cycles below 16 MB (1000000h) * * I/O cycles below 64 KB (10000h) * * The Internal I/OxAPIC at FEC0_0000 to FECF_FFFF Memory cycle in the LPC BIOS range below 4 GB will still be decoded when this bit is set; however, the aliases at the top of 1 MB (the E and F segment) no longer will be decoded. EHCI #2 Disable (EHCI2D)--R/W. Default is 0. 13 12:5 0 = The EHCI #2 is enabled. 1 = The EHCI #2 is disabled. Reserved Intel(R) High Definition Audio Disable (HDAD)--R/W. Default is 0. 4 0 = The Intel(R) High Definition Audio controller is enabled. 1 = The Intel(R) High Definition Audio controller is disabled and its PCI configuration space is not accessible. SMBus Disable (SD)--R/W. Default is 0. 3 0 = The SMBus controller is enabled. 1 = The SMBus controller is disabled. Setting this bit only disables the PCI configuration space. Serial ATA Disable 1 (SAD1)--R/W. Default is 0. 426 2 0 = The SATA controller #1 (D31:F2) is enabled. 1 = The SATA controller #1 (D31:F2) is disabled. 1 Reserved 0 BIOS must set this bit to 1b. Datasheet Chipset Configuration Registers 10.1.64 CG--Clock Gating Register Offset Address: 341C-341Fh Default Value: 00000000h Bit Attribute: Size: R/W 32-bit Description Legacy (LPC) Dynamic Clock Gate Enable--R/W. 31 0 = Legacy Dynamic Clock Gating is Disabled 1 = Legacy Dynamic Clock Gating is Enabled 30 Reserved 29.28 CG Field 1--R/W. BIOS must program this field to 11b. SATA Port 3 Dynamic Clock Gate Enable--R/W. 27 0 = SATA Port 3 Dynamic Clock Gating is Disabled 1 = SATA Port 3 Dynamic Clock Gating is Enabled SATA Port 2 Dynamic Clock Gate Enable--R/W. 26 0 = SATA Port 2 Dynamic Clock Gating is Disabled 1 = SATA Port 2 Dynamic Clock Gating is Enabled SATA Port 1 Dynamic Clock Gate Enable--R/W. 25 0 = SATA Port 1 Dynamic Clock Gating is Disabled 1 = SATA Port 1 Dynamic Clock Gating is Enabled SATA Port 0 Dynamic Clock Gate Enable--R/W. 24 0 = SATA Port 0 Dynamic Clock Gating is Disabled 1 = SATA Port 0 Dynamic Clock Gating is Enabled LAN Static Clock Gating Enable (LANSCGE)--R/W. 23 0 = LAN Static Clock Gating is Disabled 1 = LAN Static Clock Gating is Enabled when the LAN Disable bit is set in the Backed Up Control RTC register. High Definition Audio Dynamic Clock Gate Enable--R/W. 22 0 = High Definition Audio Dynamic Clock Gating is Disabled 1 = High Definition Audio Dynamic Clock Gating is Enabled High Definition Audio Static Clock Gate Enable--R/W. 21 0 = High Definition Audio Static Clock Gating is Disabled 1 = High Definition Audio Static Clock Gating is Enabled USB EHCI Static Clock Gate Enable--R/W. 20 0 = USB EHCI Static Clock Gating is Disabled 1 = USB EHCI Static Clock Gating is Enabled USB EHCI Dynamic Clock Gate Enable--R/W. 19 0 = USB EHCI Dynamic Clock Gating is Disabled 1 = USB EHCI Dynamic Clock Gating is Enabled SATA Port 5 Dynamic Clock Gate Enable--R/W. 18 0 = SATA Port 5 Dynamic Clock Gating is Disabled 1 = SATA Port 5 Dynamic Clock Gating is Enabled SATA Port 4 Dynamic Clock Gate Enable--R/W. 17 0 = SATA Port 4 Dynamic Clock Gating is Disabled 1 = SATA Port 4 Dynamic Clock Gating is Enabled PCI Dynamic Gate Enable--R/W. 16 15:6 Datasheet 0 = PCI Dynamic Gating is Disabled 1 = PCI Dynamic Gating is Enabled Reserved 427 Chipset Configuration Registers Bit Description SMBus Clock Gating Enable (SMBCGEN)--R/W. 5 4:1 0 = SMBus Clock Gating is Disabled. 1 = SMBus Clock Gating is Enabled. Reserved PCI Express Root Port Static Clock Gate Enable--R/W. 0 10.1.65 0 = PCI Express root port Static Clock Gating is Disabled 1 = PCI Express root port Static Clock Gating is Enabled FDSW--Function Disable SUS Well Register Offset Address: 3420h Default Value: 00h Bit Attribute: Size: R/W 8-bit Description Function Disable SUS Well Lockdown (FDSWL)--R/W 7 6:0 10.1.66 0 = FDSW registers are not locked down 1 = FDSW registers are locked down NOTE: This bit must be set when Intel(R) Active Management Technology is enabled. Reserved FD2--Function Disable 2 Register Offset Address: 3428-342Bh Default Value: 00000000h Bit 31:5 Attribute: Size: R/W 32-bit Description Reserved KT Disable (KTD)--R/W. Default is 0. 4 0 = Keyboard Text controller (D22:F3) is enabled. 1 = Keyboard Text controller (D22:F3) is Disabled IDE-R Disable (IRERD)--R/W. Default is 0. 3 0 = IDE Redirect controller (D22:F2) is Enabled. 1 = IDE Redirect controller (D22:F2) is Disabled. Intel(R) MEI #2 Disable (MEI2D)--R/W. Default is 0. 2 0 = Intel(R) MEI controller #2 (D22:F1) is enabled. 1 = Intel(R) MEI controller #2 (D22:F1) is disabled. Intel(R) MEI #1 Disable (MEI1D)--R/W. Default is 0. 1 0 = Intel(R) MEI controller #1 (D22:F0) is enabled. 1 = Intel(R) MEI controller #1 (D22:F0) is disabled. 0 428 Reserved Datasheet Chipset Configuration Registers 10.1.67 MISCCTL--Miscellaneous Control Register Offset Address: 3590-3593h Default Value: 00000000h Attribute: Size: R/W 32-bit This register is in the suspend well. This register is not reset on D3-to-D0, HCRESET nor core well reset. Bit 31:2 1 Description Reserved EHCI 2 USBR Enable--R/W. When set, this bit enables support for the USB-r redirect device on the EHCI controller in Device 26. SW must complete programming the following registers before this bit is set: 1. Enable RMH 2. HCSPARAMS (N_CC, N_Ports) 0 EHCI 1 USBR Enable--R/W. When set, this bit enables support for the USB-r redirect device on the EHCI controller in Device 29. SW must complete programming the following registers before this bit is set: 1. Enable RMH 2. HCSPARAMS (N_CC, N_Ports) Datasheet 429 Chipset Configuration Registers 10.1.68 USBOCM1--Overcurrent MAP Register 1 Offset Address: 35A0-35A3h Default Value: C0300C03h Attribute: Size: R/W0 32-bit All bits in this register are in the Resume Well and is only cleared by RSMRST#. Bit Description 31:24 OC3 Mapping Each bit position maps OC3# to a set of ports as follows: The OC3# pin is ganged to the overcurrent signal of each port that has its corresponding bit set. It is software responsibility to ensure that a given port`s bit map is set only for one OC pin. 23:16 15:8 7:0 430 Bit 31 30 29 28 27 26 25 24 Port 7 6 5 4 3 2 1 0 OC2 Mapping Each bit position maps OC2# to a set of ports as follows: The OC2# pin is ganged to the overcurrent signal of each port that has its corresponding bit set. It is software responsibility to ensure that a given port`s bit map is set only for one OC pin. Bit 23 22 21 20 19 18 17 16 Port 7 6 5 4 3 2 1 0 OC1 Mapping Each bit position maps OC1# to a set of ports as follows: The OC1# pin is ganged to the overcurrent signal of each port that has its corresponding bit set. It is software responsibility to ensure that a given port`s bit map is set only for one OC pin. Bit 15 14 13 12 11 10 9 8 Port 7 6 5 4 3 2 1 0 OC0 Mapping Each bit position maps OC0# to a set of ports as follows: The OC0# pin is ganged to the overcurrent signal of each port that has its corresponding bit set. It is software responsibility to ensure that a given port`s bit map is set only for one OC pin. Bit 7 6 5 4 3 2 1 0 Port 7 6 5 4 3 2 1 0 Datasheet Chipset Configuration Registers 10.1.69 USBOCM2--Overcurrent MAP Register 2 Offset Address: 35A4-35A7h Default Value: 00h Attribute: Size: R/W0 32-bit All bits in this register are in the Resume Well and is only cleared by RSMRST# Bit 31:30 Reserved 29:24 OC7 Mapping Each bit position maps OC7# to a set of ports as follows: The OC7# pin is ganged to the overcurrent signal of each port that has its corresponding bit set. It is software responsibility to ensure that a given port`s bit map is set only for one OC pin. Bit 29 28 27 26 25 24 Port 13 12 11 10 9 8 23:22 Reserved 21:16 OC6 Mapping Each bit position maps OC6# to a set of ports as follows: The OC6# pin is ganged to the overcurrent signal of each port that has its corresponding bit set. It is software responsibility to ensure that a given port`s bit map is set only for one OC pin. 15:14 13:8 Datasheet Description Bit 21 20 19 18 17 16 Port 13 12 11 10 9 8 Reserved OC5 Mapping Each bit position maps OC5# to a set of ports as follows: The OC5# pin is ganged to the overcurrent signal of each port that has its corresponding bit set. It is software responsibility to ensure that a given port`s bit map is set only for one OC pin. Bit 13 12 11 10 9 8 Port 13 12 11 10 9 8 7:6 Reserved 5:0 OC4 Mapping Each bit position maps OC4# to a set of ports as follows: The OC4# pin is ganged to the overcurrent signal of each port that has its corresponding bit set. It is software responsibility to ensure that a given port`s bit map is set only for one OC pin. Bit 5 4 3 2 1 0 Port 13 12 11 10 9 8 431 Chipset Configuration Registers 10.1.70 RMHWKCTL--Rate Matching Hub Wake Control Register Offset Address: 35B0-35B3h Default Value: 00000000h Attribute: Size: R/W 32-bit All bits in this register are in the Resume Well and is only cleared by RSMRST#. Bit 31:10 Description Reserved 9 RMH 2 Inherit EHCI2 Wake Control Settings: When this bit is set, the RMH behaves as if bits 6:4 of this register reflect the appropriate bits of EHCI PORTSC0 bits 22:20. 8 RMH 1 Inherit EHCI1 Wake Control Settings: When this bit is set, the RMH behaves as if bits 2:0 of this register reflect the appropriate bits of EHCI PORTSC0 bits 22:20. RMH 2 Upstream Wake on Device Resume This bit governs the hub behavior when globally suspended and the system is in Sx. 7 0 = Enables the port to be sensitive to device initiated resume events as system wake-up events. That is, the hub will initiate a resume on its upstream port and cause a wake from Sx when a device resume occurs on an enabled DS port 1 = Device resume event is seen on a downstream port, the hub does not initiate a wake upstream and does not cause a wake from Sx RMH 2 Upstream Wake on OC Disable This bit governs the hub behavior when globally suspended and the system is in Sx. 6 0 = Enables the port to be sensitive to over-current conditions as system wake-up events. That is, the hub will initiate a resume on its upstream port and cause a wake from Sx when an OC condition occurs on an enabled DS port 1 = Over-current event does not initiate a wake upstream and does not cause a wake from Sx RMH 2 Upstream Wake on Disconnect Disable This bit governs the hub behavior when globally suspended and the system is in Sx 5 0 = Enables disconnect events on downstream port to be treated as resume events to be propagated upstream. In this case, it is allowed to initiate a wake on its upstream port and cause a system wake from Sx in response to a disconnect event on a downstream port 1 = Downstream disconnect events do not initiate a resume on its upstream port or cause a resume from Sx. RMH 2 Upstream Wake on Connect Enable This bit governs the hub behavior when globally suspended and the system is in Sx. 4 0 = Enables connect events on a downstream port to be treated as resume events to be propagated upstream. As well as waking up the system from Sx. 1 = Downstream connect events do not wake the system from Sx nor does it initiate a resume on its upstream port. RMH 1 Upstream Wake on Device Resume This bit governs the hub behavior when globally suspended and the system is in Sx. 3 432 0 = Enables the port to be sensitive to device initiated resume events as system wake-up events. That is, the hub will initiate a resume on its upstream port and cause a wake from Sx when a device resume occurs on an enabled DS port 1 = Device resume event is seen on a downstream port, the hub does not initiate a wake upstream and does not cause a wake from Sx Datasheet Chipset Configuration Registers Bit Description RMH 1 Upstream Wake on OC Disable This bit governs the hub behavior when globally suspended and the system is in Sx. 2 0 = Enables the port to be sensitive to over-current conditions as system wake-up events. That is, the hub will initiate a resume on its upstream port and cause a wake from Sx when an OC condition occurs on an enabled DS port 1 = Over-current event does not initiate a wake upstream and does not cause a wake from Sx RMH 1 Upstream Wake on Disconnect Disable This bit governs the hub behavior when globally suspended and the system is in Sx 1 0 = Enables disconnect events on downstream port to be treated as resume events to be propagated upstream. In this case, it is allowed to initiate a wake on its upstream port and cause a system wake from Sx in response to a disconnect event on a downstream port 1 = Downstream disconnect events do not initiate a resume on its upstream port or cause a resume from Sx. RMH 1 Upstream Wake on Connect Enable This bit governs the hub behavior when globally suspended and the system is in Sx. 0 0 = Enables connect events on a downstream port to be treated as resume events to be propagated upstream. As well as waking up the system from Sx. 1 = Downstream connect events do not wake the system from Sx nor does it initiate a resume on its upstream port. Datasheet 433 Chipset Configuration Registers 434 Datasheet PCI-to-PCI Bridge Registers (D30:F0) 11 PCI-to-PCI Bridge Registers (D30:F0) The PCH PCI bridge resides in PCI Device 30, Function 0 on bus #0. This implements the buffering and control logic between PCI and the backbone. The arbitration for the PCI bus is handled by this PCI device. 11.1 PCI Configuration Registers (D30:F0) Note: Address locations that are not shown should be treated as Reserved (see Section 9.2 for details). . Table 11-1. PCI Bridge Register Address Map (PCI-PCI--D30:F0) Offset Default Type Vendor Identification 8086h RO DID Device Identification See register description RO 04h-05h PCICMD PCI Command 0000h R/W, RO 06h-07h PSTS PCI Status 0010h R/WC, RO 08h RID Revision Identification See register description RO 060401h RO 00h-01h 02h-03h Datasheet Mnemonic VID Register Name 09h-0Bh CC Class Code 0Dh PMLT Primary Master Latency Timer 00h RO 0Eh HEADTYP Header Type 01h RO 18h-1Ah BNUM Bus Number 000000h RO 1Bh SMLT Secondary Master Latency Timer 00h R/W 1Ch-1Dh IOBASE_LIMIT I/O Base and Limit 0000h R/W, RO 1Eh-1Fh SECSTS Secondary Status 0280h R/WC, RO 20h-23h MEMBASE_ LIMIT Memory Base and Limit 00000000h R/W 24h-27h PREF_MEM_ BASE_LIMIT Prefetchable Memory Base and Limit 00010001h R/W, RO 28h-2Bh PMBU32 Prefetchable Memory Upper 32 Bits 00000000h R/W 2Ch-2Fh PMLU32 Prefetchable Memory Limit Upper 32 Bits 00000000h R/W 34h CAPP Capability List Pointer 50h RO 3Ch-3Dh INTR Interrupt Information 0000h R/W, RO 3Eh-3Fh BCTRL Bridge Control 0000h R/WC, RO, R/W 40h-41h SPDH Secondary PCI Device Hiding 0000h R/W, RO 44h-47h DTC Delayed Transaction Control 00000000h R/W 48h-4Bh BPS Bridge Proprietary Status 00000000h R/WC, RO 4Ch-4Fh BPC Bridge Policy Configuration 00001200h R/W RO 50-51h SVCAP Subsystem Vendor Capability Pointer 000Dh RO 54h-57h SVID Subsystem Vendor IDs 00000000 R/WO 435 PCI-to-PCI Bridge Registers (D30:F0) 11.1.1 VID--Vendor Identification Register (PCI-PCI--D30:F0) Offset Address: 00h-01h Default Value: 8086h Bit 15:0 11.1.2 Attribute: Size: Description Vendor ID--RO. This is a 16-bit value assigned to Intel. Intel VID = 8086h. DID--Device Identification Register (PCI-PCI--D30:F0) Offset Address: 02h-03h Default Value: See bit description Bit 15:0 11.1.3 RO 16 bits Attribute: Size: RO 16 bits Description Device ID--RO. This is a 16-bit value assigned to the PCI bridge. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register. PCICMD--PCI Command Register (PCI-PCI--D30:F0) Offset Address: 04h-05h Default Value: 0000h Bit 15:11 10 9 Attribute: Size: R/W, RO 16 bits Description Reserved Interrupt Disable (ID)--RO. Hardwired to 0. The PCI bridge has no interrupts to disable Fast Back to Back Enable (FBE)--RO. Hardwired to 0, per the PCI Express* Base Specification, Revision 1.0a. SERR# Enable (SERR_EN)--R/W. 8 7 0 = Disable. 1 = Enable the PCH to generate an NMI (or SMI# if NMI routed to SMI#) when the D30:F0 SSE bit (offset 06h, bit 14) is set. Wait Cycle Control (WCC)--RO. Hardwired to 0, per the PCI Express* Base Specification, Revision 1.0a. Parity Error Response (PER)--R/W. 6 436 0 = The PCH ignores parity errors on the PCI bridge. 1 = The PCH will set the SSE bit (D30:F0, offset 06h, bit 14) when parity errors are detected on the PCI bridge. 5 VGA Palette Snoop (VPS)--RO. Hardwired to 0, per the PCI Express* Base Specification, Revision 1.0a. 4 Memory Write and Invalidate Enable (MWE)--RO. Hardwired to 0, per the PCI Express* Base Specification, Revision 1.0a 3 Special Cycle Enable (SCE)--RO. Hardwired to 0, per the PCI Express* Base Specification, Revision 1.0a and the PCI- to-PCI Bridge Specification. Datasheet PCI-to-PCI Bridge Registers (D30:F0) Bit Description Bus Master Enable (BME)--R/W. 2 1 0 11.1.4 0 = Disable 1 = Enable. Allows the PCI-to-PCI bridge to accept cycles from PCI. Memory Space Enable (MSE)--R/W. Controls the response as a target for memory cycles targeting PCI. 0 = Disable 1 = Enable I/O Space Enable (IOSE)--R/W. Controls the response as a target for I/O cycles targeting PCI. 0 = Disable 1 = Enable PSTS--PCI Status Register (PCI-PCI--D30:F0) Offset Address: 06h-07h Default Value: 0010h Note: Attribute: Size: R/WC, RO 16 bits For the writable bits, software must write a 1 to clear bits that are set. Writing a 0 to the bit has no effect. Bit Description Detected Parity Error (DPE)--R/WC. 15 Datasheet 0 = Parity error Not detected. 1 = Indicates that the PCH detected a parity error on the internal backbone. This bit gets set even if the Parity Error Response bit (D30:F0:04 bit 6) is not set. 437 PCI-to-PCI Bridge Registers (D30:F0) Bit Description Signaled System Error (SSE)--R/WC. Several internal and external sources of the bridge can cause SERR#. The first class of errors is parity errors related to the backbone. The PCI bridge captures generic data parity errors (errors it finds on the backbone) as well as errors returned on backbone cycles where the bridge was the master. If either of these two conditions is met, and the primary side of the bridge is enabled for parity error response, SERR# will be captured as shown below. As with the backbone, the PCI bus captures the same sets of errors. The PCI bridge captures generic data parity errors (errors it finds on PCI) as well as errors returned on PCI cycles where the bridge was the master. If either of these two conditions is met, and the secondary side of the bridge is enabled for parity error response, SERR# will be captured as shown below. 14 The final class of errors is system bus errors. There are three status bits associated with system bus errors, each with a corresponding enable. The diagram capturing this is shown below. After checking for the three above classes of errors, an SERR# is generated, and PSTS.SSE logs the generation of SERR#, if CMD.SEE (D30:F0:04, bit 8) is set, as shown below. Received Master Abort (RMA)--R/WC. 13 0 = No master abort received. 1 = Set when the bridge receives a master abort status from the backbone. Received Target Abort (RTA)--R/WC. 12 438 0 = No target abort received. 1 = Set when the bridge receives a target abort status from the backbone. Datasheet PCI-to-PCI Bridge Registers (D30:F0) Bit Description Signaled Target Abort (STA)--R/WC. 11 10:9 0 = No signaled target abort 1 = Set when the bridge generates a completion packet with target abort status on the backbone. Reserved Data Parity Error Detected (DPD)--R/WC. 8 7:5 Reserved 4 Capabilities List (CLIST)--RO. Hardwired to 1. Capability list exist on the PCI bridge. 3 Interrupt Status (IS)--RO. Hardwired to 0. The PCI bridge does not generate interrupts. 2:0 11.1.5 0 = Data parity error Not detected. 1 = Set when the bridge receives a completion packet from the backbone from a previous request, and detects a parity error, and CMD.PERE is set (D30:F0:04 bit 6). Reserved RID--Revision Identification Register (PCI-PCI--D30:F0) Offset Address: 08h Default Value: See bit description Bit 7:0 11.1.6 RO 8 bits Description Revision ID--RO. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Revision ID Register CC--Class Code Register (PCI-PCI--D30:F0) Offset Address: 09h-0Bh Default Value: 060401h Bit 23:16 15:8 7:0 Datasheet Attribute: Size: Attribute: Size: RO 24 bits Description Base Class Code (BCC)--RO. Hardwired to 06h. Indicates this is a bridge device. Sub Class Code (SCC)--RO. Hardwired to 04h. Indicates this device is a PCI-to-PCI bridge. Programming Interface (PI)--RO. Hardwired to 01h. Indicates the bridge is subtractive decode 439 PCI-to-PCI Bridge Registers (D30:F0) 11.1.7 PMLT--Primary Master Latency Timer Register (PCI-PCI--D30:F0) Offset Address: 0Dh Default Value: 00h Bit 11.1.8 7:3 Master Latency Timer Count (MLTC)--RO. Reserved per the PCI Express* Base Specification, Revision 1.0a. 2:0 Reserved HEADTYP--Header Type Register (PCI-PCI--D30:F0) Bit 7 6:0 Attribute: Size: RO 8 bits Description Multi-Function Device (MFD)--RO. A 0 indicates a single function device Header Type (HTYPE)--RO. This 7-bit field identifies the header layout of the configuration space, which is a PCI-to-PCI bridge in this case. BNUM--Bus Number Register (PCI-PCI--D30:F0) Offset Address: 18h-1Ah Default Value: 000000h Bit 23:16 15:8 7:0 440 RO 8 bits Description Offset Address: 0Eh Default Value: 01h 11.1.9 Attribute: Size: Attribute: Size: R/W 24 bits Description Subordinate Bus Number (SBBN)--R/W. Indicates the highest PCI bus number below the bridge. Secondary Bus Number (SCBN)--R/W. Indicates the bus number of PCI. Primary Bus Number (PBN)--R/W. This field is default to 00h. In a multiple-PCH system, programmable PBN allows an PCH to be located on any bus. System configuration software is responsible for initializing these registers to appropriate values. PBN is not used by hardware in determining its bus number. Datasheet PCI-to-PCI Bridge Registers (D30:F0) 11.1.10 SMLT--Secondary Master Latency Timer Register (PCI-PCI--D30:F0) Offset Address: 1Bh Default Value: 00h Attribute: Size: R/W 8 bits This timer controls the amount of time the PCH PCI-to-PCI bridge will burst data on its secondary interface. The counter starts counting down from the assertion of FRAME#. If the grant is removed, then the expiration of this counter will result in the deassertion of FRAME#. If the grant has not been removed, then the PCH PCI-to-PCI bridge may continue ownership of the bus. 11.1.11 Bit Description 7:3 Master Latency Timer Count (MLTC)--R/W. This 5-bit field indicates the number of PCI clocks, in 8-clock increments, that the PCH remains as master of the bus. 2:0 Reserved IOBASE_LIMIT--I/O Base and Limit Register (PCI-PCI--D30:F0) Offset Address: 1Ch-1Dh Default Value: 0000h Bit 15:12 11:8 Datasheet Attribute: Size: R/W, RO 16 bits Description I/O Limit Address Limit bits[15:12]--R/W. I/O Base bits corresponding to address lines 15:12 for 4-KB alignment. Bits 11:0 are assumed to be padded to FFFh. I/O Limit Address Capability (IOLC)--RO. Indicates that the bridge does not support 32-bit I/O addressing. 7:4 I/O Base Address (IOBA)--R/W. I/O Base bits corresponding to address lines 15:12 for 4-KB alignment. Bits 11:0 are assumed to be padded to 000h. 3:0 I/O Base Address Capability (IOBC)--RO. Indicates that the bridge does not support 32-bit I/O addressing. 441 PCI-to-PCI Bridge Registers (D30:F0) 11.1.12 SECSTS--Secondary Status Register (PCI-PCI--D30:F0) Offset Address: 1Eh-1Fh Default Value: 0280h Note: Attribute: Size: R/WC, RO 16 bits For the writable bits, software must write a 1 to clear bits that are set. Writing a 0 to the bit has no effect. Bit Description Detected Parity Error (DPE)--R/WC. 15 0 = Parity error not detected. 1 = PCH PCI bridge detected an address or data parity error on the PCI bus 14 0 = SERR# assertion not received 1 = SERR# assertion is received on PCI. Received System Error (RSE)--R/WC. Received Master Abort (RMA)--R/WC. 13 0 = No master abort. 1 = This bit is set whenever the bridge is acting as an initiator on the PCI bus and the cycle is master-aborted. For Processor/PCH interface packets that have completion required, this must also cause a target abort to be returned and sets PSTS.STA. (D30:F0:06 bit 11) Received Target Abort (RTA)--R/WC. 12 0 = No target abort. 1 = This bit is set whenever the bridge is acting as an initiator on PCI and a cycle is target-aborted on PCI. For Processor/PCH interface packets that have completion required, this event must also cause a target abort to be returned, and sets PSTS.STA. (D30:F0:06 bit 11). Signaled Target Abort (STA)--R/WC. 11 10:9 0 = No target abort. 1 = This bit is set when the bridge is acting as a target on the PCI Bus and signals a target abort. DEVSEL# Timing (DEVT)--RO. 01h = Medium decode timing. Data Parity Error Detected (DPD)--R/WC. 8 0 = Conditions described below not met. 1 = The PCH sets this bit when all of the following three conditions are met: * The bridge is the initiator on PCI. * PERR# is detected asserted or a parity error is detected internally * BCTRL.PERE (D30:F0:3E bit 0) is set. 7 Fast Back to Back Capable (FBC)--RO. Hardwired to 1 to indicate that the PCI to PCI target logic is capable of receiving fast back-to-back cycles. 6 Reserved 5 66 MHz Capable (66MHZ_CAP)--RO. Hardwired to 0. This bridge is 33 MHz capable only. 4:0 442 Reserved Datasheet PCI-to-PCI Bridge Registers (D30:F0) 11.1.13 MEMBASE_LIMIT--Memory Base and Limit Register (PCI-PCI--D30:F0) Offset Address: 20h-23h Default Value: 00000000h Attribute: Size: R/W 32 bits This register defines the base and limit, aligned to a 1-MB boundary, of the nonprefetchable memory area of the bridge. Accesses that are within the ranges specified in this register will be sent to PCI if CMD.MSE is set. Accesses from PCI that are outside the ranges specified will be accepted by the bridge if CMD.BME is set. Bit 31:20 Memory Limit (ML)--R/W. These bits are compared with bits 31:20 of the incoming address to determine the upper 1-MB aligned value (exclusive) of the range. The incoming address must be less than this value. 19:16 Reserved 15:4 3:0 11.1.14 Description Memory Base (MB)--R/W. These bits are compared with bits 31:20 of the incoming address to determine the lower 1-MB aligned value (inclusive) of the range. The incoming address must be greater than or equal to this value. Reserved PREF_MEM_BASE_LIMIT--Prefetchable Memory Base and Limit Register (PCI-PCI--D30:F0) Offset Address: 24h-27h Default Value: 00010001h Attribute: Size: R/W, RO 32-bit Defines the base and limit, aligned to a 1-MB boundary, of the prefetchable memory area of the bridge. Accesses that are within the ranges specified in this register will be sent to PCI if CMD.MSE is set. Accesses from PCI that are outside the ranges specified will be accepted by the bridge if CMD.BME is set. Bit Description 31:20 Prefetchable Memory Limit (PML)--R/W. These bits are compared with bits 31:20 of the incoming address to determine the upper 1-MB aligned value (exclusive) of the range. The incoming address must be less than this value. 19:16 15:4 3:0 Datasheet 64-bit Indicator (I64L)--RO. Indicates support for 64-bit addressing. Prefetchable Memory Base (PMB)--R/W. These bits are compared with bits 31:20 of the incoming address to determine the lower 1-MB aligned value (inclusive) of the range. The incoming address must be greater than or equal to this value. 64-bit Indicator (I64B)--RO. Indicates support for 64-bit addressing. 443 PCI-to-PCI Bridge Registers (D30:F0) 11.1.15 PMBU32--Prefetchable Memory Base Upper 32 Bits Register (PCI-PCI--D30:F0) Offset Address: 28h-2Bh Default Value: 00000000h Bit 31:0 11.1.16 Prefetchable Memory Base Upper Portion (PMBU)--R/W. Upper 32-bits of the prefetchable address base. PMLU32--Prefetchable Memory Limit Upper 32 Bits Register (PCI-PCI--D30:F0) Bit 31:0 R/W 32 bits Prefetchable Memory Limit Upper Portion (PMLU)--R/W. Upper 32-bits of the prefetchable address limit. CAPP--Capability List Pointer Register (PCI-PCI--D30:F0) Bit 7:0 Attribute: Size: RO 8 bits Description Capabilities Pointer (PTR)--RO. Indicates that the pointer for the first entry in the capabilities list is at 50h in configuration space. INTR--Interrupt Information Register (PCI-PCI--D30:F0) Offset Address: 3Ch-3Dh Default Value: 0000h Bit 15:8 7:0 444 Attribute: Size: Description Offset Address: 34h Default Value: 50h 11.1.18 R/W 32 bits Description Offset Address: 2C-2Fh Default Value: 00000000h 11.1.17 Attribute: Size: Attribute: Size: R/W, RO 16 bits Description Interrupt Pin (IPIN)--RO. The PCI bridge does not assert an interrupt. Interrupt Line (ILINE)--R/W. Software written value to indicate which interrupt line (vector) the interrupt is connected to. No hardware action is taken on this register. Since the bridge does not generate an interrupt, BIOS should program this value to FFh as per the PCI bridge specification. Datasheet PCI-to-PCI Bridge Registers (D30:F0) 11.1.19 BCTRL--Bridge Control Register (PCI-PCI--D30:F0) Offset Address: 3Eh-3Fh Default Value: 0000h Bit 15:12 11 10 9 Attribute: Size: R/WC, RO, R/W 16 bits Description Reserved Discard Timer SERR# Enable (DTE)--R/W. Controls the generation of SERR# on the primary interface in response to the DTS bit being set: 0 = Do not generate SERR# on a secondary timer discard 1 = Generate SERR# in response to a secondary timer discard Discard Timer Status (DTS)--R/WC. This bit is set to 1 when the secondary discard timer (see the SDT bit below) expires for a delayed transaction in the hard state. Secondary Discard Timer (SDT)--R/W. This bit sets the maximum number of PCI clock cycles that the PCH waits for an initiator on PCI to repeat a delayed transaction request. The counter starts once the delayed transaction data is has been returned by the system and is in a buffer in the PCH PCI bridge. If the master has not repeated the transaction at least once before the counter expires, the PCH PCI bridge discards the transaction from its queue. 0 = The PCI master timeout value is between 215 and 216 PCI clocks 1 = The PCI master timeout value is between 210 and 211 PCI clocks 8 Primary Discard Timer (PDT)--R/W. This bit is R/W for software compatibility only. 7 Fast Back to Back Enable (FBE)--RO. Hardwired to 0. The PCI logic will not generate fast back-to-back cycles on the PCI bus. Secondary Bus Reset (SBR)--R/W. Controls PCIRST# assertion on PCI. 6 0 = Bridge de-asserts PCIRST# 1 = Bridge asserts PCIRST#. When PCIRST# is asserted, the delayed transaction buffers, posting buffers, and the PCI bus are initialized back to reset conditions. The rest of the part and the configuration registers are not affected. Master Abort Mode (MAM)--R/W. Controls the PCH PCI bridge's behavior when a master abort occurs: Master Abort on Processor /PCH Interconnect (DMI): 0 = Bridge asserts TRDY# on PCI. It drives all 1s for reads, and discards data on writes. 1 = Bridge returns a target abort on PCI. 5 Master Abort PCI (non-locked cycles): 0 = Normal completion status will be returned on the Processor/PCH interconnect. 1 = Target abort completion status will be returned on the Processor/PCH interconnect. NOTE: All locked reads will return a completer abort completion status on the Processor/PCH interconnect. 4 Datasheet VGA 16-Bit Decode (V16D)--R/W. Enables the PCH PCI bridge to provide 16-bits decoding of VGA I/O address precluding the decode of VGA alias addresses every 1 KB. This bit requires the VGAE bit in this register be set. 445 PCI-to-PCI Bridge Registers (D30:F0) Bit Description VGA Enable (VGAE)--R/W. When set to a 1, the PCH PCI bridge forwards the following transactions to PCI regardless of the value of the I/O base and limit registers. The transactions are qualified by CMD.MSE (D30:F0:04 bit 1) and CMD.IOSE (D30:F0:04 bit 0) being set. * Memory addresses: 000A0000h-000BFFFFh 3 * I/O addresses: 3B0h-3BBh and 3C0h-3DFh. For the I/O addresses, bits [63:16] of the address must be 0, and bits [15:10] of the address are ignored (that is, aliased). The same holds true from secondary accesses to the primary interface in reverse. That is, when the bit is 0, memory and I/O addresses on the secondary interface between the above ranges will be claimed. 2 ISA Enable (IE)--R/W. This bit only applies to I/O addresses that are enabled by the I/O Base and I/O Limit registers and are in the first 64 KB of PCI I/O space. If this bit is set, the PCH PCI bridge will block any forwarding from primary to secondary of I/O transactions addressing the last 768 bytes in each 1-KB block (offsets 100h to 3FFh). SERR# Enable (SEE)--R/W. Controls the forwarding of secondary interface SERR# assertions on the primary interface. When set, the PCI bridge will forward SERR# pin. 1 * SERR# is asserted on the secondary interface. * This bit is set. * CMD.SEE (D30:F0:04 bit 8) is set. Parity Error Response Enable (PERE)--R/W. 0 446 0 = Disable 1 = The PCH PCI bridge is enabled for parity error reporting based on parity errors on the PCI bus. Datasheet PCI-to-PCI Bridge Registers (D30:F0) 11.1.20 SPDH--Secondary PCI Device Hiding Register (PCI-PCI--D30:F0) Offset Address: 40h-41h Default Value: 0000h Attribute: Size: R/W, RO 16 bits This register allows software to hide the PCI devices, either plugged into slots or on the motherboard. Bit 15:4 Description Reserved 3 Hide Device 3 (HD3)--R/W, RO. Same as bit 0 of this register, except for device 3 (AD[19]) 2 Hide Device 2 (HD2)--R/W, RO. Same as bit 0 of this register, except for device 2 (AD[18]) 1 Hide Device 1 (HD1)--R/W, RO. Same as bit 0 of this register, except for device 1 (AD[17]) Hide Device 0 (HD0)--R/W, RO. 0 11.1.21 0 = The PCI configuration cycles for this slot are not affected. 1 = The PCH hides device 0 on the PCI bus. This is done by masking the IDSEL (keeping it low) for configuration cycles to that device. Since the device will not see its IDSEL go active, it will not respond to PCI configuration cycles and the processor will think the device is not present. AD[16] is used as IDSEL for device 0. DTC--Delayed Transaction Control Register (PCI-PCI--D30:F0) Offset Address: 44h-47h Default Value: 00000000h Bit Attribute: Size: R/W 32 bits Description Discard Delayed Transactions (DDT)--R/W. 31 0 = Logged delayed transactions are kept. 1 = The PCH PCI bridge will discard any delayed transactions it has logged. This includes transactions in the pending queue, and any transactions in the active queue, whether in the hard or soft DT state. The prefetchers will be disabled and return to an idle state. NOTES:If a transaction is running on PCI at the time this bit is set, that transaction will continue until either the PCI master disconnects (by de-asserting FRAME#) or the PCI bridge disconnects (by asserting STOP#). This bit is cleared by the PCI bridge when the delayed transaction queues are empty and have returned to an idle state. Software sets this bit and polls for its completion Block Delayed Transactions (BDT)--R/W. 30 29:8 Datasheet 0 = Delayed transactions accepted 1 = The PCH PCI bridge will not accept incoming transactions which will result in delayed transactions. It will blindly retry these cycles by asserting STOP#. All postable cycles (memory writes) will still be accepted. Reserved 447 PCI-to-PCI Bridge Registers (D30:F0) Bit Description Maximum Delayed Transactions (MDT)--R/W. Controls the maximum number of delayed transactions that the PCH PCI bridge will run. Encodings are: 7:6 00 =) 2 Active, 5 pending 01 =) 2 active, no pending 10 =) 1 active, no pending 11 =) Reserved 5 Reserved Auto Flush After Disconnect Enable (AFADE)--R/W. 4 0 = The PCI bridge will retain any fetched data until required to discard by producer/ consumer rules. 1 = The PCI bridge will flush any prefetched data after either the PCI master (by deasserting FRAME#) or the PCI bridge (by asserting STOP#) disconnects the PCI transfer. Never Prefetch (NP)--R/W. 3 0 = Prefetch enabled 1 = The PCH will only fetch a single DW and will not enable prefetching, regardless of the command being an Memory read (MR), Memory read line (MRL), or Memory read multiple (MRM). Memory Read Multiple Prefetch Disable (MRMPD)--R/W. 2 0 = MRM commands will fetch multiple cache lines as defined by the prefetch algorithm. 1 = Memory read multiple (MRM) commands will fetch only up to a single, 64-byte aligned cache line. Memory Read Line Prefetch Disable (MRLPD)--R/W. 1 0 = MRL commands will fetch multiple cache lines as defined by the prefetch algorithm. 1 = Memory read line (MRL) commands will fetch only up to a single, 64-byte aligned cache line. Memory Read Prefetch Disable (MRPD)--R/W. 0 448 0 = MR commands will fetch up to a 64-byte aligned cache line. 1 = Memory read (MR) commands will fetch only a single DW. Datasheet PCI-to-PCI Bridge Registers (D30:F0) 11.1.22 BPS--Bridge Proprietary Status Register (PCI-PCI--D30:F0) Offset Address: 48h-4Bh Default Value: 00000000h Bit 31:17 16 Attribute: Size: R/WC, RO 32 bits Description Reserved PERR# Assertion Detected (PAD)--R/WC. This bit is set by hardware whenever the PERR# pin is asserted on the rising edge of PCI clock. This includes cases in which the chipset is the agent driving PERR#. It remains asserted until cleared by software writing a 1 to this location. When enabled by the PERR#-to-SERR# Enable bit (in the Bridge Policy Configuration register), a 1 in this bit can generate an internal SERR# and be a source for the NMI logic. This bit can be used by software to determine the source of a system problem. 15:7 Reserved Number of Pending Transactions (NPT)--RO. This read-only indicator tells debug software how many transactions are in the pending queue. Possible values are: 000 = No pending transaction 001 = 1 pending transaction 010 = 2 pending transactions 6:4 011 = 3 pending transactions 100 = 4 pending transactions 101 = 5 pending transactions 110-111 = Reserved NOTE: This field is not valid if DTC.MDT (offset 44h:bits 7:6) is any value other than `00'. 3:2 Reserved Number of Active Transactions (NAT)--RO. This read-only indicator tells debug software how many transactions are in the active queue. Possible values are: 1:0 00 = No active transactions 01 = 1 active transaction 10 = 2 active transactions 11 = Reserved Datasheet 449 PCI-to-PCI Bridge Registers (D30:F0) 11.1.23 BPC--Bridge Policy Configuration Register (PCI-PCI--D30:F0) Offset Address: 4Ch-4Fh Default Value: 00001200h Attribute: Size: Bit 31:14 13:8 R/W 32 bits Description Reserved Upstream Read Latency Threshold (URLT)--R/W: This field specifies the number of PCI clocks after internally enqueuing an upstream memory read request at which point the PCI target logic should insert wait states to optimize lead-off latency. When the master returns after this threshold has been reached and data has not arrived in the Delayed Transaction completion queue, then the PCI target logic will insert wait states instead of immediately retrying the cycle. The PCI target logic will insert up to 16 clocks of target initial latency (from FRAME# assertion to TRDY# or STOP# assertion) before retrying the PCI read cycle (if the read data has not arrived yet). Note that the starting event for this Read Latency Timer is not explicitly visible externally. A value of 0h disables this policy completely such that wait states will never be inserted on the read lead-off data phase. The default value (12h) specifies 18 PCI clocks (540 ns) and is approximately 4 clocks less than the typical idle lead-off latency expected for desktop PCH systems. This value may need to be changed by BIOS, depending on the platform. Subtractive Decode Policy (SDP)--R/W. 0 = The PCI bridge always forwards memory and I/O cycles that are not claimed by any other device on the backbone (primary interface) to the PCI bus (secondary interface). 1 = The PCI bridge will not claim and forward memory or I/O cycles at all unless the corresponding Space Enable bit is set in the Command register. NOTE: The Boot BIOS Destination Selection strap can force the BIOS accesses to PCI. 7 6 CMD.MSE BPC.SDP Range Forwarding Policy 0 0 Don't Care Forward unclaimed cycles 0 1 Don't Care Forwarding Prohibited 1 X Within range Positive decode and forward 1 X Outside Subtractive decode & forward PERR#-to-SERR# Enable (PSE)--R/W. When this bit is set, a 1 in the PERR# Assertion status bit (in the Bridge Proprietary Status register) will result in an internal SERR# assertion on the primary side of the bridge (if also enabled by the SERR# Enable bit in the primary Command register). SERR# is a source of NMI. Secondary Discard Timer Testmode (SDTT)--R/W. 5 4:3 450 0 = The secondary discard timer expiration will be defined in BCTRL.SDT (D30:F0:3E, bit 9) 1 = The secondary discard timer will expire after 128 PCI clocks. Reserved Datasheet PCI-to-PCI Bridge Registers (D30:F0) Bit Description Peer Decode Enable (PDE)--R/W. 2 11.1.24 0 = The PCI bridge assumes that all memory cycles target main memory, and all I/O cycles are not claimed. 1 = The PCI bridge will perform peer decode on any memory or I/O cycle from PCI that falls outside of the memory and I/O window registers 1 Reserved 0 Received Target Abort SERR# Enable (RTAE)--R/W. When set, the PCI bridge will report SERR# when PSTS.RTA (D30:F0:06 bit 12) or SSTS.RTA (D30:F0:1E bit 12) are set, and CMD.SEE (D30:F0:04 bit 8) is set. SVCAP--Subsystem Vendor Capability Register (PCI-PCI--D30:F0) Offset Address: 50h-51h Default Value: 000Dh Bit 15:8 7:0 11.1.25 Attribute: Size: RO 16 bits Description Next Capability (NEXT)--RO. Value of 00h indicates this is the last item in the list. Capability Identifier (CID)--RO. Value of 0Dh indicates this is a PCI bridge subsystem vendor capability. SVID--Subsystem Vendor IDs Register (PCI-PCI--D30:F0) Offset Address: 54h-57h Default Value: 00000000h Bit Attribute: Size: R/WO 32 bits Description 31:16 Subsystem Identifier (SID)--R/WO. Indicates the subsystem as identified by the vendor. This field is write once and is locked down until a bridge reset occurs (not the PCI bus reset). 15:0 Subsystem Vendor Identifier (SVID)--R/WO. Indicates the manufacturer of the subsystem. This field is write once and is locked down until a bridge reset occurs (not the PCI bus reset). Datasheet 451 PCI-to-PCI Bridge Registers (D30:F0) 452 Datasheet Gigabit LAN Configuration Registers 12 Gigabit LAN Configuration Registers 12.1 Gigabit LAN Configuration Registers (Gigabit LAN--D25:F0) Note: Register address locations that are not shown in Table 12-1 should be treated as Reserved. / Table 12-1. Gigabit LAN Configuration Registers Address Map (Gigabit LAN--D25:F0) (Sheet 1 of 2) Datasheet Offset Mnemonic Register Name Default Type 00h-01h VID Vendor Identification 8086h RO 02h-03h DID Device Identification See register description RO 04h-05h PCICMD PCI Command 0000h R/W, RO 06h-07h PCISTS PCI Status 0010h R/WC, RO 08h RID Revision Identification See register description RO 09h-0Bh CC Class Code 020000h RO 0Ch CLS Cache Line Size 00h R/W 0Dh PLT Primary Latency Timer 00h RO 0Eh HEADTYP Header Type 00h RO 10h-13h MBARA 00000000h R/W, RO Memory Base Address A 14h-17h MBARB Memory Base Address B 00000000h R/W, RO 18h-1Bh MBARC Memory Base Address C 00000001h R/W, RO 2Ch-2Dh SID Subsystem ID See register description RO 2Eh-2Fh SVID Subsystem Vendor ID See register description RO 30h-33h ERBA Expansion ROM Base Address See register description RO 34h CAPP Capabilities List Pointer C8h RO 3Ch-3Dh INTR Interrupt Information See register description R/W, RO 3Eh MLMG Maximum Latency/Minimum Grant 00h RO C8h-C9h CLIST1 CAh-CBh PMC CCh-CDh PMCS Capabilities List 1 D001h RO PCI Power Management Capability See register description RO PCI Power Management Control and Status See register description R/WC, R/W, RO 453 Gigabit LAN Configuration Registers Table 12-1. Gigabit LAN Configuration Registers Address Map (Gigabit LAN--D25:F0) (Sheet 2 of 2) 12.1.1 Offset Mnemonic CFh DR D0h-D1h CLIST2 D2h-D3h MCTL D4h-D7h MADDL D8h-DBh MADDH DCh-DDh MDAT E0h-E1h FLRCAP E2h-E3h FLRCLV E4h-E5h DEVCTRL Register Name Default Type See register description RO Capabilities List 2 E005h R/WO, RO Message Control 0080h R/W, RO Message Address Low See register description R/W Message Address High See register description R/W Message Data See register description R/W Function Level Reset Capability 0009h RO Function Level Reset Capability Length and Value See register description R/WO, RO 0000h R/W, RO Data Register Device Control VID--Vendor Identification Register (Gigabit LAN--D25:F0) Address Offset: 00h-01h Default Value: 8086h 12.1.2 RO 16 bits Bit Description 15:0 Vendor ID--RO. This is a 16-bit value assigned to Intel. The field may be auto-loaded from the NVM at address 0Eh during init time depending on the "Load Vendor/Device ID" bit field in NVM word 0Ah with a default value of 8086h. DID--Device Identification Register (Gigabit LAN--D25:F0) Address Offset: 02h-03h Default Value: See bit description 454 Attribute: Size: Attribute: Size: RO 16 bits Bit Description 15:0 Device ID--RO. This is a 16-bit value assigned to the PCH Gigabit LAN controller. The field may be auto-loaded from the NVM word 0Dh during initialization time depending on the "Load Vendor/Device ID" bit field in NVM word 0Ah. Datasheet Gigabit LAN Configuration Registers 12.1.3 PCICMD--PCI Command Register (Gigabit LAN--D25:F0) Address Offset: 04h-05h Default Value: 0000h Bit 15:11 Attribute: Size: R/W, RO 16 bits Description Reserved Interrupt Disable--R/W. This disables pin-based INTx# interrupts on enabled HotPlug and power management events. This bit has no effect on MSI operation. 10 0 = Internal INTx# messages are generated if there is an interrupt for Hot-Plug or power management and MSI is not enabled. 1 = Internal INTx# messages will not be generated. This bit does not affect interrupt forwarding from devices connected to the root port. Assert_INTx and Deassert_INTx messages will still be forwarded to the internal interrupt controllers if this bit is set. 9 Fast Back to Back Enable (FBE)--RO. Hardwired to 0. SERR# Enable (SEE)--R/W. 8 7 0 = Disable 1 = Enables the Gb LAN controller to generate an SERR# message when PSTS.SSE is set. Wait Cycle Control (WCC)--RO. Hardwired to 0. Parity Error Response (PER)--R/W. 6 0 = Disable. 1 = Indicates that the device is capable of reporting parity errors as a master on the backbone. 5 Palette Snoop Enable (PSE)--RO. Hardwired to 0. 4 Postable Memory Write Enable (PMWE)--RO. Hardwired to 0. 3 Special Cycle Enable (SCE)--RO. Hardwired to 0. Bus Master Enable (BME)--R/W. 2 0 = Disable. All cycles from the device are master aborted 1 = Enable. Allows the root port to forward cycles onto the backbone from a Gigabit LAN* device. Memory Space Enable (MSE)--R/W. 1 0 = Disable. Memory cycles within the range specified by the memory base and limit registers are master aborted on the backbone. 1 = Enable. Allows memory cycles within the range specified by the memory base and limit registers can be forwarded to the Gigabit LAN device. I/O Space Enable (IOSE)--R/W. This bit controls access to the I/O space registers. 0 Datasheet 0 = Disable. I/O cycles within the range specified by the I/O base and limit registers are master aborted on the backbone. 1 = Enable. Allows I/O cycles within the range specified by the I/O base and limit registers can be forwarded to the Gigabit LAN device. 455 Gigabit LAN Configuration Registers 12.1.4 PCISTS--PCI Status Register (Gigabit LAN--D25:F0) Address Offset: 06h-07h Default Value: 0010h Bit Attribute: Size: R/WC, RO 16 bits Description Detected Parity Error (DPE)--R/WC. 15 0 = No parity error detected. 1 = Set when the Gb LAN controller receives a command or data from the backbone with a parity error. This is set even if PCIMD.PER (D25:F0, bit 6) is not set. Signaled System Error (SSE)--R/WC. 14 0 = No system error signaled. 1 = Set when the Gb LAN controller signals a system error to the internal SERR# logic. Received Master Abort (RMA)--R/WC. 13 0 = Root port has not received a completion with unsupported request status from the backbone. 1 = Set when the GbE LAN controller receives a completion with unsupported request status from the backbone. Received Target Abort (RTA)--R/WC. 12 0 = Root port has not received a completion with completer abort from the backbone. 1 = Set when the Gb LAN controller receives a completion with completer abort from the backbone. Signaled Target Abort (STA)--R/WC. 11 10:9 0 = No target abort received. 1 = Set whenever the Gb LAN controller forwards a target abort received from the downstream device onto the backbone. DEVSEL# Timing Status (DEV_STS)--RO. Hardwired to `0'. Master Data Parity Error Detected (DPED)--R/WC. 8 0 = No data parity error received. 1 = Set when the Gb LAN Controller receives a completion with a data parity error on the backbone and PCIMD.PER (D25:F0, bit 6) is set. 7 Fast Back to Back Capable (FB2BC)--RO. Hardwired to `0'. 6 Reserved 5 66 MHz Capable--RO. Hardwired to 0. 4 Capabilities List--RO. Hardwired to 1. Indicates the presence of a capabilities list. Interrupt Status--RO. Indicates status of Hot-Plug and power management interrupts on the root port that result in INTx# message generation. 3 0 = Interrupt is de-asserted. 1 = Interrupt is asserted. This bit is not set if MSI is enabled. If MSI is not enabled, this bit is set regardless of the state of PCICMD.Interrupt Disable bit (D25:F0:04h:bit 10). 2:0 456 Reserved Datasheet Gigabit LAN Configuration Registers 12.1.5 RID--Revision Identification Register (Gigabit LAN--D25:F0) Offset Address: 08h Default Value: See bit description Bit 7:0 12.1.6 Attribute: Size: Description Intel(R) Revision ID--RO. See the 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Revision ID Register CC--Class Code Register (Gigabit LAN--D25:F0) Address Offset: 09h-0Bh Default Value: 020000h Bit 23:0 12.1.7 Attribute: Size: Class Code--RO. Identifies the device as an Ethernet Adapter. 020000h = Ethernet Adapter. CLS--Cache Line Size Register (Gigabit LAN--D25:F0) Bit 7:0 Attribute: Size: Cache Line Size--R/W. This field is implemented by PCI devices as a read write field for legacy compatibility purposes but has no impact on any device functionality. PLT--Primary Latency Timer Register (Gigabit LAN--D25:F0) Bit 7:0 Attribute: Size: RO 8 bits Description Latency Timer (LT)--RO. Hardwired to 0. HT--Header Type Register (Gigabit LAN--D25:F0) Address Offset: 0Eh Default Value: 00h Bit 7:0 Datasheet R/W 8 bits Description Address Offset: 0Dh Default Value: 00h 12.1.9 RO 24 bits Description Address Offset: 0Ch Default Value: 00h 12.1.8 RO 8 bits Attribute: Size: RO 8 bits Description Header Type (HT)--RO. 00h = Indicates this is a single function device. 457 Gigabit LAN Configuration Registers 12.1.10 MBARA--Memory Base Address Register A (Gigabit LAN--D25:F0) Address Offset: 10h-13h Default Value: 00000000h Attribute: Size: R/W, RO 32 bits The internal CSR registers and memories are accessed as direct memory mapped offsets from the base address register. SW may only access whole DWord at a time. Bit Description 31:17 Base Address (BA)--R/W. Software programs this field with the base address of this region. 16:4 3 2:1 0 12.1.11 Memory Size (MSIZE)--R/W. Memory size is 128 KB. Prefetchable Memory (PM)--RO. The GbE LAN controller does not implement prefetchable memory. Memory Type (MT)--RO. Set to 00b indicating a 32 bit BAR. Memory / IO Space (MIOS)--RO. Set to 0 indicating a Memory Space BAR. MBARB--Memory Base Address Register B (Gigabit LAN--D25:F0) Address Offset: 14h-17h Default Value: 00000000h Attribute: Size: R/W, RO 32 bits The internal registers that are used to access the LAN Space in the External FLASH device. Access to these registers are direct memory mapped offsets from the base address register. Software may only access a DWord at a time. Bit Description 31:12 Base Address (BA)--R/W. Software programs this field with the base address of this region. 11:4 3 2:1 0 458 Memory Size (MSIZE)--R/W. Memory size is 4 KB. Prefetchable Memory (PM)--RO. The Gb LAN controller does not implement prefetchable memory. Memory Type (MT)--RO. Set to 00b indicating a 32 bit BAR. Memory / IO Space (MIOS)--RO. Set to 0 indicating a Memory Space BAR. Datasheet Gigabit LAN Configuration Registers 12.1.12 MBARC--Memory Base Address Register C (Gigabit LAN--D25:F0) Address Offset: 18h-1Bh Default Value: 00000001h Attribute: Size: R/W, RO 32 bits Internal registers, and memories, can be accessed using I/O operations. There are two 4B registers in the I/O mapping window: Addr Reg and Data Reg. Software may only access a DWord at a time. Bit Description 31:5 Base Address (BA)--R/W. Software programs this field with the base address of this region. 4:1 0 12.1.13 I/O Size (IOSIZE)--RO. I/O space size is 32 Bytes. Memory / I/O Space (MIOS)--RO. Set to 1 indicating an I/O Space BAR. SVID--Subsystem Vendor ID Register (Gigabit LAN--D25:F0) Address Offset: 2Ch-2Dh Default Value: See bit description 12.1.14 Description 15:0 Subsystem Vendor ID (SVID)--RO. This value may be loaded automatically from the NVM Word 0Ch upon power up depending on the "Load Subsystem ID" bit field in NVM word 0Ah. A value of 8086h is default for this field upon power up if the NVM does not respond or is not programmed. All functions are initialized to the same value. SID--Subsystem ID Register (Gigabit LAN--D25:F0) Bit 15:0 Attribute: Size: RO 16 bits Description Subsystem ID (SID)--RO. This value may be loaded automatically from the NVM Word 0Bh upon power up or reset depending on the "Load Subsystem ID" bit field in NVM word 0Ah with a default value of 0000h. This value is loadable from NVM word location 0Ah. ERBA--Expansion ROM Base Address Register (Gigabit LAN--D25:F0) Address Offset: 30h-33h Default Value: See bit description Datasheet RO 16 bits Bit Address Offset: 2Eh-2Fh Default Value: See bit description 12.1.15 Attribute: Size: Attribute: Size: RO 32 bits Bit Description 31:0 Expansion ROM Base Address (ERBA)--RO. This register is used to define the address and size information for boot-time access to the optional FLASH memory. If no Flash memory exists, this register reports 00000000h. 459 Gigabit LAN Configuration Registers 12.1.16 CAPP--Capabilities List Pointer Register (Gigabit LAN--D25:F0) Address Offset: 34h Default Value: C8h Bit 7:0 12.1.17 Attribute: Size: R0 8 bits Description Capabilities Pointer (PTR)--RO. Indicates that the pointer for the first entry in the capabilities list is at C8h in configuration space. INTR--Interrupt Information Register (Gigabit LAN--D25:F0) Address Offset: 3Ch-3Dh Default Value: 0100h Function Level Reset: No Bit 15:8 Attribute: Size: R/W, RO 16 bits Description Interrupt Pin (IPIN)--RO. Indicates the interrupt pin driven by the GbE LAN controller. 01h = The GbE LAN controller implements legacy interrupts on INTA. 7:0 12.1.18 Interrupt Line (ILINE)--R/W. Default = 00h. Software written value to indicate which interrupt line (vector) the interrupt is connected to. No hardware action is taken on this register. MLMG--Maximum Latency/Minimum Grant Register (Gigabit LAN--D25:F0) Address Offset: 3Eh Default Value: 00h Bit 7:0 12.1.19 RO 8 bits Description Maximum Latency/Minimum Grant (MLMG)--RO. Not used. Hardwired to 00h. CLIST 1--Capabilities List Register 1 (Gigabit LAN--D25:F0) Address Offset: C8h-C9h Default Value: D001h Attribute: Size: RO 16 bits Bit Description 15:8 Next Capability (NEXT)--RO. Value of D0h indicates the location of the next pointer. 7:0 460 Attribute: Size: Capability ID (CID)--RO. Indicates the linked list item is a PCI Power Management Register. Datasheet Gigabit LAN Configuration Registers 12.1.20 PMC--PCI Power Management Capabilities Register (Gigabit LAN--D25:F0) Address Offset: Default Value: Function Level Reset: CAh-CBh Attribute: See bit descriptions Size: No (Bits 15:11 only) Bit RO 16 bits Description PME_Support (PMES)--RO. This five-bit field indicates the power states in which the function may assert PME#. It depend on PM Ena and AUX-PWR bits in word 0Ah in the NVM: 15:11 Condition Function Value PM Ena=0 No PME at all states 0000b PM Ena & AUX-PWR=0 PME at D0 and D3hot 01001b PM Ena & AUX-PWR=1 PME at D0, D3hot and D3cold 11001b These bits are not reset by Function Level Reset. 10 D2_Support (D2S)--RO. The D2 state is not supported. 9 D1_Support (D1S)--RO. The D1 state is not supported. 8:6 5 Device Specific Initialization (DSI)--RO. Set to 1. The GbE LAN Controller requires its device driver to be executed following transition to the D0 un-initialized state. 4 Reserved 3 PME Clock (PMEC)--RO. Hardwired to 0. 2:0 Datasheet Aux_Current (AC)--RO. Required current defined in the Data Register. Version (VS)--RO. Hardwired to 010b to indicate support for Revision 1.1 of the PCI Power Management Specification. 461 Gigabit LAN Configuration Registers 12.1.21 PMCS--PCI Power Management Control and Status Register (Gigabit LAN--D25:F0) Address Offset: CCh-CDh Default Value: See bit description Function Level Reset: No (Bit 8 only) Bit 15 Attribute: Size: R/WC, R/W, RO 16 bits Description PME Status (PMES)--R/WC. This bit is set to 1 when the function detects a wake-up event independent of the state of the PMEE bit. Writing a 1 will clear this bit. Data Scale (DSC)--R/W. This field indicates the scaling factor to be used when interpreting the value of the Data register. 14:13 For the GbE LAN and common functions this field equals 01b (indicating 0.1 watt units) if the PM is enabled in the NVM, and the Data_Select field is set to 0, 3, 4, 7, (or 8 for Function 0). Else it equals 00b. For the manageability functions this field equals 10b (indicating 0.01 watt units) if the PM is enabled in the NVM, and the Data_Select field is set to 0, 3, 4, 7. Else it equals 00b. Data Select (DSL)--R/W. This four-bit field is used to select which data is to be reported through the Data register (offset CFh) and Data_Scale field. These bits are writeable only when the Power Management is enabled using NVM. 0h = D0 Power Consumption 12:9 3h = D3 Power Consumption 4h = D0 Power Dissipation 7h = D3 Power Dissipation 8h = Common Power All other values are reserved. 8 7:4 PME Enable (PMEE)--R/W. If Power Management is enabled in the NVM, writing a 1 to this register will enable Wakeup. If Power Management is disabled in the NVM, writing a 1 to this bit has no affect, and will not set the bit to 1. This bit is not reset by Function Level Reset. Reserved - Returns a value of 0000. 3 No Soft Reset (NSR)--RO. Defines if the device executed internal reset on the transition to D0. the LAN controller always reports 0 in this field. 2 Reserved - Returns a value of 0b. Power State (PS)--R/W. This field is used both to determine the current power state of the GbE LAN Controller and to set a new power state. The values are: 00 = D0 state (default) 1:0 01 = Ignored 10 = Ignored 11 = D3 state (Power Management must be enables in the NVM or this cycle will be ignored). 462 Datasheet Gigabit LAN Configuration Registers 12.1.22 DR--Data Register (Gigabit LAN--D25:F0) Address Offset: CFh Default Value: See bit description 12.1.23 Attribute: Size: RO 8 bits Bit Description 7:0 Reported Data (RD)--RO. This register is used to report power consumption and heat dissipation. This register is controlled by the Data_Select field in the PMCS (Offset CCh, bits 12:9), and the power scale is reported in the Data_Scale field in the PMCS (Offset CCh, bits 14:13). The data of this field is loaded from the NVM if PM is enabled in the NVM or with a default value of 00h otherwise. CLIST 2--Capabilities List Register 2 (Gigabit LAN--D25:F0) Address Offset: Default Value: Function Level Reset: D0h-D1h E005h No (Bits 15:8 only) Bit 15:8 Attribute: Size: R/WO, RO 16 bits Description Next Capability (NEXT)--R/WO. Value of E0h points to the Function Level Reset capability structure. These bits are not reset by Function Level Reset. 7:0 12.1.24 Capability ID (CID)--RO. Indicates the linked list item is a Message Signaled Interrupt Register. MCTL--Message Control Register (Gigabit LAN--D25:F0) Address Offset: D2h-D3h Default Value: 0080h Bit 15:8 7 Attribute: Size: R/W, RO 16 bits Description Reserved 64-bit Capable (CID)--RO. Set to 1 to indicate that the GbE LAN Controller is capable of generating 64-bit message addresses. 6:4 Multiple Message Enable (MME)--RO. Returns 000b to indicate that the GbE LAN controller only supports a single message. 3:1 Multiple Message Capable (MMC)--RO. The GbE LAN controller does not support multiple messages. MSI Enable (MSIE)--R/W. 0 Datasheet 0 = MSI generation is disabled. 1 = The Gb LAN controller will generate MSI for interrupt assertion instead of INTx signaling. 463 Gigabit LAN Configuration Registers 12.1.25 MADDL--Message Address Low Register (Gigabit LAN--D25:F0) Address Offset: D4h-D7h Default Value: See bit description 12.1.26 Attribute: Size: Bit Description 31:0 Message Address Low (MADDL)--R/W. Written by the system to indicate the lower 32 bits of the address to use for the MSI memory write transaction. The lower two bits will always return 0 regardless of the write operation. MADDH--Message Address High Register (Gigabit LAN--D25:F0) Address Offset: D8h-DBh Default Value: See bit description 12.1.27 Attribute: Size: R/W 32 bits Bit Description 31:0 Message Address High (MADDH)--R/W. Written by the system to indicate the upper 32 bits of the address to use for the MSI memory write transaction. MDAT--Message Data Register (Gigabit LAN--D25:F0) Address Offset: DCh-DDh Default Value: See bit description 12.1.28 R/W 32 bits Attribute: Size: R/W 16 bits Bit Description 31:0 Message Data (MDAT)--R/W. Written by the system to indicate the lower 16 bits of the data written in the MSI memory write DWORD transaction. The upper 16 bits of the transaction are written as 0000h. FLRCAP--Function Level Reset Capability (Gigabit LAN--D25:F0) Address Offset: E0h-E1h Default Value: 0009h Bit 15:8 Attribute: Size: RO 16 bits Description Next Pointer--RO. This field provides an offset to the next capability item in the capability list. The value of 00h indicates the last item in the list. Capability ID--RO. The value of this field depends on the FLRCSSEL bit. 7:0 13h = If FLRCSSEL = 0 09h = If FLRCSSEL = 1, indicating vendor specific capability. 464 Datasheet Gigabit LAN Configuration Registers 12.1.29 FLRCLV--Function Level Reset Capability Length and Version (Gigabit LAN--D25:F0) Address Offset: Default Value: Function Level Reset: E2h-E3h Attribute: R/WO, RO See Description. Size: 16 bits No (Bits 9:8 Only When FLRCSSEL = 0) When FLRCSSEL = 0, this register is defined as follows: Bit 15:10 9 Description Reserved Function Level Reset Capability--R/WO. 1 = Support for Function Level Reset. This bit is not reset by Function Level Reset. 8 7:0 TXP Capability--R/WO. 1 = Indicates support for the Transactions Pending (TXP) bit. TXP must be supported if FLR is supported. Capability Length--RO. The value of this field indicates the number of bytes of the vendor specific capability as require by the PCI spec. It has the value of 06h for the Function Level Reset capability. When FLRCSSEL = 1, this register is defined as follows: 12.1.30 Bit Description 15:12 Vendor Specific Capability ID--RO. A value of 2h in this field identifies this capability as Function Level Reset. 11:8 Capability Version--RO. The value of this field indicates the version of the Function Level Reset Capability. Default is 0h. 7:0 Capability Length--RO. The value of this field indicates the number of bytes of the vendor specific capability as require by the PCI spec. It has the value of 06h for the Function Level Reset capability. DEVCTRL--Device Control (Gigabit LAN--D25:F0) Address Offset: E4-E5h Default Value: 0000h Bit 15:9 8 Attribute: Size: R/W, RO 16 bits Description Reserved Transactions Pending (TXP)--R/W. 1 = Indicates the controller has issued Non-Posted requests which have not been completed. 0 = Indicates that completions for all Non-Posted requests have been received. 7:1 0 Datasheet Reserved Initiate Function Level Reset--RO. This bit is used to initiate an FLT transition. A write of 1 initiates the transition. Since hardware must not respond to any cycles until Function Level Reset completion, the value read by software from this bit is 0. 465 Gigabit LAN Configuration Registers 466 Datasheet LPC Interface Bridge Registers (D31:F0) 13 LPC Interface Bridge Registers (D31:F0) The LPC bridge function of the PCH resides in PCI Device 31:Function 0. This function contains many other functional units, such as DMA and Interrupt controllers, Timers, Power Management, System Management, GPIO, RTC, and LPC Configuration Registers. Registers and functions associated with other functional units are described in their respective sections. 13.1 PCI Configuration Registers (LPC I/F--D31:F0) Note: Address locations that are not shown should be treated as Reserved. . Table 13-1. LPC Interface PCI Register Address Map (LPC I/F--D31:F0) (Sheet 1 of 2) Offset Mnemonic 00h-01h VID 02h-03h DID 04h-05h PCICMD 06h-07h PCISTS 08h RID 09h PI 0Ah SCC Default Type Vendor Identification 8086h RO Device Identification See register description RO PCI Command 0007h R/W, RO PCI Status 0210h R/WC, RO Revision Identification See register description RO Programming Interface 00h RO Sub Class Code 01h RO 0Bh BCC Base Class Code 06h RO 0Dh PLT Primary Latency Timer 00h RO 0Eh HEADTYP Header Type 80h RO 2Ch-2Fh SS 00000000h R/WO Sub System Identifiers 34h CAPP 40h-43h PMBASE 44h ACPI_CNTL ACPI Control 48h-4Bh GPIOBASE GPIO Base Address 4C GC 60h-63h PIRQ[n]_ROUT 64h SIRQ_CNTL 68h-6Bh PIRQ[n]_ROUT 6Ch-6Dh LPC_IBDF 70h-7F 80h Datasheet Register Name Capability List Pointer ACPI Base Address GPIO Control PIRQ[A-D] Routing Control Serial IRQ Control PIRQ[E-H] Routing Control IOxAPIC Bus:Device:Function E0h RO 00000001h R/W, RO 00h R/W 00000001h R/W, RO 00h R/W 80808080h R/W 10h R/W, RO 80808080h R/W 00F8h R/W 0000h R/W HPET Configuration LPC_I/O_DEC I/O Decode Ranges 467 LPC Interface Bridge Registers (D31:F0) Table 13-1. LPC Interface PCI Register Address Map (LPC I/F--D31:F0) (Sheet 2 of 2) Offset Mnemonic 82h-83h LPC_EN 84h-87h GEN1_DEC 88h-8Bh Default Type 0000h R/W LPC I/F Generic Decode Range 1 00000000h R/W GEN2_DEC LPC I/F Generic Decode Range 2 00000000h R/W 8Ch-8Eh GEN3_DEC LPC I/F Generic Decode Range 3 00000000h R/W 90h-93h GEN4_DEC LPC I/F Generic Decode Range 4 00000000h R/W 94h-97h ULKMC 98h-9Bh LGMR 00000000h R/W LPC I/F Enables USB Legacy Keyboard / Mouse Control LPC Generic Memory Range Power Management (See Section 13.8.1) A0h-CFh 13.1.1 Register Name D0h-D3h FWH_SEL1 Firmware Hub Select 1 00112233h R/W, RO D4h-D5h FWH_SEL2 Firmware Hub Select 2 4567h R/W D8h-D9h FWH_DEC_EN1 Firmware Hub Decode Enable 1 FFCFh R/W, RO DCh BIOS_CNTL 00h R/WLO, R/W, RO E0h-E1h FDCAP Feature Detection Capability ID 0009h RO E2h FDLEN Feature Detection Capability Length 0Ch RO E3h FDVER Feature Detection Version 10h RO E4h-EBh FDVCT Feature Vector See Description RO F0h-F3h RCBA Root Complex Base Address 00000000h R/W BIOS Control VID--Vendor Identification Register (LPC I/F--D31:F0) Offset Address: 00h-01h Default Value: 8086h Lockable: No Bit 15:0 13.1.2 RO 16-bit Core Description Vendor ID--RO. This is a 16-bit value assigned to Intel. Intel VID = 8086h DID--Device Identification Register (LPC I/F--D31:F0) Offset Address: 02h-03h Default Value: See bit description Lockable: No 468 Attribute: Size: Power Well: Attribute: Size: Power Well: RO 16-bit Core Bit Description 15:0 Device ID--RO. This is a 16-bit value assigned to the PCH LPC bridge. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register. Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.3 PCICMD--PCI COMMAND Register (LPC I/F--D31:F0) Offset Address: 04h-05h Default Value: 0007h Lockable: No Bit 15:10 Attribute: Size: Power Well: R/W, RO 16-bit Core Description Reserved 9 Fast Back to Back Enable (FBE)--RO. Hardwired to 0. 8 SERR# Enable (SERR_EN)--R/W. The LPC bridge generates SERR# if this bit is set. 7 Wait Cycle Control (WCC)--RO. Hardwired to 0. Parity Error Response Enable (PERE)--R/W. Datasheet 6 0 = No action is taken when detecting a parity error. 1 = Enables the PCH LPC bridge to respond to parity errors detected on backbone interface. 5 VGA Palette Snoop (VPS)--RO. Hardwired to 0. 4 Memory Write and Invalidate Enable (MWIE)--RO. Hardwired to 0. 3 Special Cycle Enable (SCE)--RO. Hardwired to 0. 2 Bus Master Enable (BME)--RO. Bus Masters cannot be disabled. 1 Memory Space Enable (MSE)--RO. Memory space cannot be disabled on LPC. 0 I/O Space Enable (IOSE)--RO. I/O space cannot be disabled on LPC. 469 LPC Interface Bridge Registers (D31:F0) 13.1.4 PCISTS--PCI Status Register (LPC I/F--D31:F0) Offset Address: 06h-07h Default Value: 0210h Lockable: No Note: Attribute: Size: Power Well: RO, R/WC 16-bit Core For the writable bits, software must write a 1 to clear bits that are set. Writing a 0 to the bit has no effect. Bit Description 15 Detected Parity Error (DPE)--R/WC. Set when the LPC bridge detects a parity error on the internal backbone. Set even if the PCICMD.PERE bit (D31:F0:04, bit 6) is 0. 0 = Parity Error Not detected. 1 = Parity Error detected. 14 Signaled System Error (SSE)--R/WC. Set when the LPC bridge signals a system error to the internal SERR# logic. Master Abort Status (RMA)--R/WC. 13 0 = Unsupported request status not received. 1 = The bridge received a completion with unsupported request status from the backbone. Received Target Abort (RTA)--R/WC. 12 0 = Completion abort not received. 1 = Completion with completion abort received from the backbone. Signaled Target Abort (STA)--R/WC. 11 10:9 0 = Target abort Not generated on the backbone. 1 = LPC bridge generated a completion packet with target abort status on the backbone. DEVSEL# Timing Status (DEV_STS)--RO. 01 = Medium Timing. Data Parity Error Detected (DPED)--R/WC. 0 = All conditions listed below Not met. 1 = Set when all three of the following conditions are met: 8 * LPC bridge receives a completion packet from the backbone from a previous request, * Parity error has been detected (D31:F0:06, bit 15) * PCICMD.PERE bit (D31:F0:04, bit 6) is set. 7 6 Reserved 5 66 MHz Capable (66MHZ_CAP)--Reserved - bit has no meaning on the internal backbone. 4 Capabilities List (CLIST)--RO. Capability list exists on the LPC bridge. 3 Interrupt Status (IS)--RO. The LPC bridge does not generate interrupts. 2:0 470 Fast Back to Back Capable (FBC): Reserved - bit has no meaning on the internal backbone. Reserved Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.5 RID--Revision Identification Register (LPC I/F--D31:F0) Offset Address: 08h Default Value: See bit description Bit 7:0 13.1.6 Attribute: Size: Description Revision ID (RID)--RO. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Revision ID Register PI--Programming Interface Register (LPC I/F--D31:F0) Offset Address: 09h Default Value: 00h Bit 7:0 13.1.7 RO 8 bits Attribute: Size: RO 8 bits Description Programming Interface--RO. SCC--Sub Class Code Register (LPC I/F--D31:F0) Offset Address: 0Ah Default Value: 01h Bit 7:0 Attribute: Size: RO 8 bits Description Sub Class Code--RO. 8-bit value that indicates the category of bridge for the LPC bridge. 01h = PCI-to-ISA bridge. 13.1.8 BCC--Base Class Code Register (LPC I/F--D31:F0) Offset Address: 0Bh Default Value: 06h Bit 7:0 13.1.9 Attribute: Size: Description Base Class Code--RO. 8-bit value that indicates the type of device for the LPC bridge. 06h = Bridge device. PLT--Primary Latency Timer Register (LPC I/F--D31:F0) Offset Address: 0Dh Default Value: 00h Bit Datasheet RO 8 bits Attribute: Size: RO 8 bits Description 7:3 Master Latency Count (MLC)--Reserved. 2:0 Reserved 471 LPC Interface Bridge Registers (D31:F0) 13.1.10 HEADTYP--Header Type Register (LPC I/F--D31:F0) Offset Address: 0Eh Default Value: 80h Bit 7 6:0 13.1.11 Attribute: Size: RO 8 bits Description Multi-Function Device--RO. This bit is 1 to indicate a multi-function device. Header Type--RO. This 7-bit field identifies the header layout of the configuration space. SS--Sub System Identifiers Register (LPC I/F--D31:F0) Offset Address: 2Ch-2Fh Default Value: 00000000h Attribute: Size: R/WO 32 bits This register is initialized to logic 0 by the assertion of PLTRST#. This register can be written only once after PLTRST# de-assertion. 13.1.12 Bit Description 31:16 Subsystem ID (SSID)--R/WO. This is written by BIOS. No hardware action taken on this value. 15:0 Subsystem Vendor ID (SSVID)--R/WO. This is written by BIOS. No hardware action taken on this value. CAPP--Capability List Pointer Register (LPC I/F--D31:F0) Offset Address: 34h Default Value: E0h Bit 7:0 13.1.13 Attribute: Size: RO 8 bits Description Capability Pointer (CP)--RO. Indicates the offset of the first Capability Item. PMBASE--ACPI Base Address Register (LPC I/F--D31:F0) Offset Address: 40h-43h Default Value: 00000001h Lockable: No Attribute: Size: Usage: Power Well: R/W, RO 32 bit ACPI, Legacy Core Sets base address for ACPI I/O registers, GPIO registers and TCO I/O registers. These registers can be mapped anywhere in the 64-K I/O space on 128-byte boundaries. Bit 31:16 15:7 6:1 0 472 Description Reserved Base Address--R/W. This field provides 128 bytes of I/O space for ACPI, GPIO, and TCO logic. This is placed on a 128-byte boundary. Reserved Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate I/O space. Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.14 ACPI_CNTL--ACPI Control Register (LPC I/F--D31:F0) Offset Address: 44h Default Value: 00h Lockable: No Attribute: Size: Usage: Power Well: Bit R/W 8 bit ACPI, Legacy Core Description ACPI Enable (ACPI_EN)--R/W. 0 = Disable. 1 = Decode of the I/O range pointed to by the ACPI base register is enabled, and the ACPI power management function is enabled. Note that the APM power management ranges (B2/B3h) are always enabled and are not affected by this bit. 7 6:3 Reserved SCI IRQ Select (SCI_IRQ_SEL)--R/W. Specifies on which IRQ the SCI will internally appear. If not using the APIC, the SCI must be routed to IRQ9-11, and that interrupt is not sharable with the SERIRQ stream, but is shareable with other PCI interrupts. If using the APIC, the SCI can also be mapped to IRQ20-23, and can be shared with other interrupts. 2:0 000b IRQ9 001b IRQ10 010b IRQ11 011b Reserved 100b IRQ20 (Only available if APIC enabled) 101b IRQ21 (Only available if APIC enabled) 110b IRQ22 (Only available if APIC enabled) 111b IRQ23 (Only available if APIC enabled) When the interrupt is mapped to APIC interrupts 9, 10, or 11, the APIC should be programmed for active-high reception. When the interrupt is mapped to APIC interrupts 20 through 23, the APIC should be programmed for active-low reception. 13.1.15 GPIOBASE--GPIO Base Address Register (LPC I/F--D31:F0) Offset Address: 48h-4Bh Default Value: 00000001h Bit 31:16 15:7 6:1 0 Datasheet Attribute: Size: R/W, RO 32 bit Description Reserved. Always 0. Base Address (BA)--R/W. Provides the 128 bytes of I/O space for GPIO. Reserved. Always 0. RO. Hardwired to 1 to indicate I/O space. 473 LPC Interface Bridge Registers (D31:F0) 13.1.16 GC--GPIO Control Register (LPC I/F--D31:F0) Offset Address: 4Ch Default Value: 00h Bit 7:5 4 3:1 Attribute: Size: R/W 8 bit Description Reserved GPIO Enable (EN)--R/W. This bit enables/disables decode of the I/O range pointed to by the GPIO Base Address register (D31:F0:48h) and enables the GPIO function. 0 = Disable. 1 = Enable. Reserved GPIO Lockdown Enable (GLE)--R/W. This bit enables lockdown of the following GPIO registers: * Offset 00h: GPIO_USE_SEL * Offset 04h: GP_IO_SEL * Offset 0Ch: GP_LVL * Offset 30h: GPIO_USE_SEL2 * Offset 34h: GP_IO_SEL2 0 * Offset 38h: GP_LVL2 * Offset 40h: GPIO_USE_SEL3 * Offset 44h: GP_IO_SEL3 * Offset 48h: GP_LVL3 * Offset 60h: GP_RST_SEL 0 = Disable. 1 = Enable. When this bit is written from 1-to-0, an SMI# is generated, if enabled. This ensures that only SMM code can change the above GPIO registers after they are locked down. 474 Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.17 PIRQ[n]_ROUT--PIRQ[A,B,C,D] Routing Control Register (LPC I/F--D31:F0) Offset Address: PIRQA - 60h, PIRQB - 61h, PIRQC - 62h, PIRQD - 63h Default Value: 80h Lockable: No Bit Attribute: R/W Size: Power Well: 8 bit Core Description Interrupt Routing Enable (IRQEN)--R/W. 7 0 = The corresponding PIRQ is routed to one of the ISA-compatible interrupts specified in bits[3:0]. 1 = The PIRQ is not routed to the 8259. NOTE: BIOS must program this bit to 0 during POST for any of the PIRQs that are being used. The value of this bit may subsequently be changed by the OS when setting up for I/O APIC interrupt delivery mode. 6:4 Reserved IRQ Routing--R/W. (ISA compatible.) 3:0 Datasheet Value IRQ Value 0000b Reserved 1000b Reserved IRQ 0001b Reserved 1001b IRQ9 0010b Reserved 1010b IRQ10 0011b IRQ3 1011b IRQ11 0100b IRQ4 1100b IRQ12 0101b IRQ5 1101b Reserved 0110b IRQ6 1110b IRQ14 0111b IRQ7 1111b IRQ15 475 LPC Interface Bridge Registers (D31:F0) 13.1.18 SIRQ_CNTL--Serial IRQ Control Register (LPC I/F--D31:F0) Offset Address: 64h Default Value: 10h Lockable: No Bit Attribute: Size: Power Well: R/W, RO 8 bit Core Description Serial IRQ Enable (SIRQEN)--R/W. 7 0 = The buffer is input only and internally SERIRQ will be a 1. 1 = Serial IRQs will be recognized. The SERIRQ pin will be configured as SERIRQ. Serial IRQ Mode Select (SIRQMD)--R/W. 6 0 = The serial IRQ machine will be in quiet mode. 1 = The serial IRQ machine will be in continuous mode. NOTE: For systems using Quiet Mode, this bit should be set to 1 (Continuous Mode) for at least one frame after coming out of reset before switching back to Quiet Mode. Failure to do so will result in the PCH not recognizing SERIRQ interrupts. 5:2 1:0 Serial IRQ Frame Size (SIRQSZ)--RO. Fixed field that indicates the size of the SERIRQ frame as 21 frames. Start Frame Pulse Width (SFPW)--R/W. This is the number of PCI clocks that the SERIRQ pin will be driven low by the serial IRQ machine to signal a start frame. In continuous mode, the PCH will drive the start frame for the number of clocks specified. In quiet mode, the PCH will drive the start frame for the number of clocks specified minus one, as the first clock was driven by the peripheral. 00 = 4 clocks 01 = 6 clocks 10 = 8 clocks 11 = Reserved 476 Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.19 PIRQ[n]_ROUT--PIRQ[E,F,G,H] Routing Control Register (LPC I/F--D31:F0) Offset Address: PIRQE - 68h, PIRQF - 69h, PIRQG - 6Ah, PIRQH - 6Bh Default Value: 80h Lockable: No Bit Attribute: R/W Size: Power Well: 8 bit Core Description Interrupt Routing Enable (IRQEN)--R/W. 7 0 = The corresponding PIRQ is routed to one of the ISA-compatible interrupts specified in bits[3:0]. 1 = The PIRQ is not routed to the 8259. NOTE: BIOS must program this bit to 0 during POST for any of the PIRQs that are being used. The value of this bit may subsequently be changed by the OS when setting up for I/O APIC interrupt delivery mode. 6:4 Reserved IRQ Routing--R/W. (ISA compatible.) Q 3:0 13.1.20 Q 0000b Reserved 1000b Reserved 0001b Reserved 1001b IRQ9 0010b Reserved 1010b IRQ10 0011b IRQ3 1011b IRQ11 0100b IRQ4 1100b IRQ12 0101b IRQ5 1101b Reserved 0110b IRQ6 1110b IRQ14 0111b IRQ7 1111b IRQ15 LPC_IBDF--IOxAPIC Bus:Device:Function Register (LPC I/F--D31:F0) Offset Address: 6Ch-6Dh Default Value: 00F8h Bit Attribute: Size: R/W 16 bit Description IOxAPIC Bus:Device:Function (IBDF)--R/W. this field specifies the bus:device:function that PCH's IOxAPIC will be using for the following: * As the Requester ID when initiating Interrupt Messages to the processor. * As the Completer ID when responding to the reads targeting the IOxAPIC's Memory-Mapped I/O registers. 15:0 The 16-bit field comprises p the following: 15:8 Bus Number 7:3 Device Number 2:0 Function Number This field defaults to Bus 0: Device 31: Function 0 after reset. BIOS can program this field to provide a unique bus:device:function number for the internal IOxAPIC. Datasheet 477 LPC Interface Bridge Registers (D31:F0) 13.1.21 LPC_HnBDF--HPET n Bus:Device:Function Register (LPC I/F--D31:F0) Address Offset Default Value: H0BDF H1BDF H2BDF H3BDF H4BDF H5BDF H6BDF H7BDF 00F8h 70h-71h 72h-73h 74h-75h 76h-77h 78h-79h 7Ah-7Bh 7Ch-7Dh 7Eh-7Fh Bit Attribute: Size: R/W 16 bit Description HPET n Bus:Device:Function (HnBDF)--R/W. This field specifies the bus:device:function that the PCH's HPET n will be using in the following: * As the Requester ID when initiating Interrupt Messages to the processor * As the Completer ID when responding to the reads targeting the corresponding HPET's Memory-Mapped I/O registers The 16-bit field comprises the following: Bits 15:0 15:8 Description Bus Number 7:3 Device Number 2:0 Function Number This field is default to Bus 0: Device 31: Function 0 after reset. BIOS shall program this field accordingly if unique bus:device:function number is required for the corresponding HPET. 478 Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.22 LPC_I/O_DEC--I/O Decode Ranges Register (LPC I/F--D31:F0) Offset Address: 80h Default Value: 0000h Bit 15:13 Attribute: Size: R/W 16 bit Description Reserved FDD Decode Range--R/W. Determines which range to decode for the FDD Port 12 11:10 0 = 3F0h-3F5h, 3F7h (Primary) 1 = 370h-375h, 377h (Secondary) Reserved LPT Decode Range--R/W. This field determines which range to decode for the LPT Port. 9:8 7 00 01 10 11 = = = = 378h-37Fh and 778h-77Fh 278h-27Fh (port 279h is read only) and 678h-67Fh 3BCh -3BEh and 7BCh-7BEh Reserved Reserved COMB Decode Range--R/W. This field determines which range to decode for the COMB Port. 000 = 3F8h-3FFh (COM1) 001 = 2F8h-2FFh (COM2) 6:4 010 = 220h-227h 011 = 228h-22Fh 100 = 238h-23Fh 101 = 2E8h-2EFh (COM4) 110 = 338h-33Fh 111 = 3E8h-3EFh (COM3) 3 Reserved COMA Decode Range--R/W. This field determines which range to decode for the COMA Port. 000 = 3F8h-3FFh (COM1) 001 = 2F8h-2FFh (COM2) 2:0 010 = 220h-227h 011 = 228h-22Fh 100 = 238h-23Fh 101 = 2E8h-2EFh (COM4) 110 = 338h-33Fh 111 = 3E8h-3EFh (COM3) Datasheet 479 LPC Interface Bridge Registers (D31:F0) 13.1.23 LPC_EN--LPC I/F Enables Register (LPC I/F--D31:F0) Offset Address: 82h-83h Default Value: 0000h Bit 15:14 Attribute: Size: Power Well: R/W 16 bit Core Description Reserved CNF2_LPC_EN--R/W. Microcontroller Enable # 2. 13 0 = Disable. 1 = Enables the decoding of the I/O locations 4Eh and 4Fh to the LPC interface. This range is used for a microcontroller. CNF1_LPC_EN--R/W. Super I/O Enable. 12 0 = Disable. 1 = Enables the decoding of the I/O locations 2Eh and 2Fh to the LPC interface. This range is used for Super I/O devices. MC_LPC_EN--R/W. Microcontroller Enable # 1. 11 0 = Disable. 1 = Enables the decoding of the I/O locations 62h and 66h to the LPC interface. This range is used for a microcontroller. KBC_LPC_EN--R/W. Keyboard Enable. 10 0 = Disable. 1 = Enables the decoding of the I/O locations 60h and 64h to the LPC interface. This range is used for a microcontroller. GAMEH_LPC_EN--R/W. High Gameport Enable 9 0 = Disable. 1 = Enables the decoding of the I/O locations 208h to 20Fh to the LPC interface. This range is used for a gameport. GAMEL_LPC_EN--R/W. Low Gameport Enable 8 7:4 0 = Disable. 1 = Enables the decoding of the I/O locations 200h to 207h to the LPC interface. This range is used for a gameport. Reserved FDD_LPC_EN--R/W. Floppy Drive Enable 3 0 = Disable. 1 = Enables the decoding of the FDD range to the LPC interface. This range is selected in the LPC_FDD/LPT Decode Range Register (D31:F0:80h, bit 12). LPT_LPC_EN--R/W. Parallel Port Enable 2 0 = Disable. 1 = Enables the decoding of the LPTrange to the LPC interface. This range is selected in the LPC_FDD/LPT Decode Range Register (D31:F0:80h, bit 9:8). COMB_LPC_EN--R/W. Com Port B Enable 1 0 = Disable. 1 = Enables the decoding of the COMB range to the LPC interface. This range is selected in the LPC_COM Decode Range Register (D31:F0:80h, bits 6:4). COMA_LPC_EN--R/W. Com Port A Enable 0 480 0 = Disable. 1 = Enables the decoding of the COMA range to the LPC interface. This range is selected in the LPC_COM Decode Range Register (D31:F0:80h, bits 3:2). Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.24 GEN1_DEC--LPC I/F Generic Decode Range 1 Register (LPC I/F--D31:F0) Offset Address: 84h-87h Default Value: 00000000h Bit Attribute: Size: Power Well: R/W 32 bit Core Description 31:24 Reserved 23:18 Generic I/O Decode Range Address[7:2] Mask--R/W. A 1 in any bit position indicates that any value in the corresponding address bit in a received cycle will be treated as a match. The corresponding bit in the Address field, below, is ignored. The mask is only provided for the lower 6 bits of the DWord address, allowing for decoding blocks up to 256 bytes in size. 17:16 15:2 1 Reserved Generic I/O Decode Range 1 Base Address (GEN1_BASE)--R/W. NOTE: The PCH Does not provide decode down to the word or byte level Reserved Generic Decode Range 1 Enable (GEN1_EN)--R/W. 0 13.1.25 0 = Disable. 1 = Enable the GEN1 I/O range to be forwarded to the LPC I/F GEN2_DEC--LPC I/F Generic Decode Range 2 Register (LPC I/F--D31:F0) Offset Address: 88h-8Bh Default Value: 00000000h Bit Attribute: Size: Power Well: R/W 32 bit Core Description 31:24 Reserved 23:18 Generic I/O Decode Range Address[7:2] Mask--R/W. A 1 in any bit position indicates that any value in the corresponding address bit in a received cycle will be treated as a match. The corresponding bit in the Address field, below, is ignored. The mask is only provided for the lower 6 bits of the DWord address, allowing for decoding blocks up to 256 bytes in size. 17:16 15:2 1 Reserved Generic I/O Decode Range 2 Base Address (GEN1_BASE)--R/W. NOTE: The PCH does not provide decode down to the word or byte level. Reserved Generic Decode Range 2 Enable (GEN2_EN)--R/W. 0 Datasheet 0 = Disable. 1 = Enable the GEN2 I/O range to be forwarded to the LPC I/F 481 LPC Interface Bridge Registers (D31:F0) 13.1.26 GEN3_DEC--LPC I/F Generic Decode Range 3 Register (LPC I/F--D31:F0) Offset Address: 8Ch-8Eh Default Value: 00000000h Bit Attribute: Size: Power Well: R/W 32 bit Core Description 31:24 Reserved 23:18 Generic I/O Decode Range Address[7:2] Mask--R/W. A 1 in any bit position indicates that any value in the corresponding address bit in a received cycle will be treated as a match. The corresponding bit in the Address field, below, is ignored. The mask is only provided for the lower 6 bits of the DWord address, allowing for decoding blocks up to 256 bytes in size. 17:16 15:2 1 Reserved Generic I/O Decode Range 3 Base Address (GEN3_BASE)--R/W. NOTE: The PCH Does not provide decode down to the word or byte level Reserved Generic Decode Range 3 Enable (GEN3_EN)--R/W. 0 13.1.27 0 = Disable. 1 = Enable the GEN3 I/O range to be forwarded to the LPC I/F GEN4_DEC--LPC I/F Generic Decode Range 4 Register (LPC I/F--D31:F0) Offset Address: 90h-93h Default Value: 00000000h Bit Attribute: Size: Power Well: R/W 32 bit Core Description 31:24 Reserved 23:18 Generic I/O Decode Range Address[7:2] Mask--R/W. A 1 in any bit position indicates that any value in the corresponding address bit in a received cycle will be treated as a match. The corresponding bit in the Address field, below, is ignored. The mask is only provided for the lower 6 bits of the DWord address, allowing for decoding blocks up to 256 bytes in size. 17:16 15:2 1 Reserved Generic I/O Decode Range 4 Base Address (GEN4_BASE)--R/W. NOTE: The PCH Does not provide decode down to the word or byte level Reserved Generic Decode Range 4 Enable (GEN4_EN)--R/W. 0 482 0 = Disable. 1 = Enable the GEN4 I/O range to be forwarded to the LPC I/F Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.28 ULKMC--USB Legacy Keyboard / Mouse Control Register (LPC I/F--D31:F0) Offset Address: 94h-97h Default Value: 00002000h Bit 31:16 15 Attribute: Size: Power Well: RO, RWC, R/W 32 bit Core Description Reserved SMI Caused by End of Pass-Through (SMIBYENDPS)--R/WC. This bit indicates if the event occurred. Note that even if the corresponding enable bit is not set in bit 7, then this bit will still be active. It is up to the SMM code to use the enable bit to determine the exact cause of the SMI#. 0 = Software clears this bit by writing a 1 to the bit location in any of the controllers. 1 = Event Occurred 14:12 11 Reserved SMI Caused by Port 64 Write (TRAPBY64W)--R/WC. This bit indicates if the event occurred. Note that even if the corresponding enable bit is not set in bit 3, this bit will still be active. It is up to the SMM code to use the enable bit to determine the exact cause of the SMI#. Note that the A20Gate Pass-Through Logic allows specific port 64h writes to complete without setting this bit. 0 = Software clears this bit by writing a 1 to the bit location in any of the controllers. 1 = Event Occurred. 10 SMI Caused by Port 64 Read (TRAPBY64R)--R/WC. This bit indicates if the event occurred. Note that even if the corresponding enable bit is not set in bit 2, this bit will still be active. It is up to the SMM code to use the enable bit to determine the exact cause of the SMI#. 0 = Software clears this bit by writing a 1 to the bit location in any of the controllers. 1 = Event Occurred. 9 SMI Caused by Port 60 Write (TRAPBY60W)--R/WC. This bit indicates if the event occurred. Note that even if the corresponding enable bit is not set in bit 1, this bit will still be active. It is up to the SMM code to use the enable bit to determine the exact cause of the SMI#. Note that the A20Gate Pass-Through Logic allows specific port 64h writes to complete without setting this bit. 0 = Software clears this bit by writing a 1 to the bit location in any of the controllers. 1 = Event Occurred. 8 SMI Caused by Port 60 Read (TRAPBY60R)--R/WC. This bit indicates if the event occurred. Note that even if the corresponding enable bit is not set in the bit 0, then this bit will still be active. It is up to the SMM code to use the enable bit to determine the exact cause of the SMI#. 0 = Software clears this bit by writing a 1 to the bit location in any of the controllers. 1 = Event Occurred. 7 SMI at End of Pass-Through Enable (SMIATENDPS)--R/W. This bit enables SMI at the end of a pass-through. This can occur if an SMI is generated in the middle of a pass-through, and needs to be serviced later. 0 = Disable 1 = Enable Pass Through State (PSTATE)--RO. 6 Datasheet 0 = If software needs to reset this bit, it should set bit 5 in all of the host controllers to 0. 1 = Indicates that the state machine is in the middle of an A20GATE pass-through sequence. 483 LPC Interface Bridge Registers (D31:F0) Bit Description A20Gate Pass-Through Enable (A20PASSEN)--R/W. 5 0 = Disable. 1 = Enable. Allows A20GATE sequence Pass-Through function. A specific cycle sequence involving writes to port 60h and 64h does not result in the setting of the SMI status bits. SMI on USB IRQ Enable (USBSMIEN)--R/W. 4 0 = Disable 1 = Enable. USB interrupt will cause an SMI event. SMI on Port 64 Writes Enable (64WEN)--R/W. 3 0 = Disable 1 = Enable. A 1 in bit 11 will cause an SMI event. SMI on Port 64 Reads Enable (64REN)--R/W. 2 0 = Disable 1 = Enable. A 1 in bit 10 will cause an SMI event. SMI on Port 60 Writes Enable (60WEN)--R/W. 1 0 = Disable 1 = Enable. A 1 in bit 9 will cause an SMI event. SMI on Port 60 Reads Enable (60REN)--R/W. 0 13.1.29 0 = Disable 1 = Enable. A 1 in bit 8 will cause an SMI event. LGMR--LPC I/F Generic Memory Range Register (LPC I/F--D31:F0) Offset Address: 98h-9Bh Default Value: 00000000h R/W 32 bit Core Bit Description 31:16 Memory Address[31:16]--R/W. This field specifies a 64 KB memory block anywhere in the 4 GB memory space that will be decoded to LPC as standard LPC memory cycle if enabled. 15:1 0 484 Attribute: Size: Power Well: Reserved LPC Memory Range Decode Enable--R/W. When this bit is set to 1, then the range specified in bits 31:16 of this register is enabled for decoding to LPC. Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.30 FWH_SEL1--Firmware Hub Select 1 Register (LPC I/F--D31:F0) Offset Address: D0h-D3h Default Value: 00112233h Bit 31:28 27:24 23:20 19:16 15:12 11:8 7:4 3:0 Datasheet Attribute: Size: R/W, RO 32 bits Description FWH_F8_IDSEL--RO. IDSEL for two 512-KB Firmware Hub memory ranges and one 128-KB memory range. This field is fixed at 0000. The IDSEL programmed in this field addresses the following memory ranges: FFF8 0000h-FFFF FFFFh FFB8 0000h-FFBF FFFFh 000E 0000h-000F FFFFh FWH_F0_IDSEL--R/W. IDSEL for two 512-KB Firmware Hub memory ranges. The IDSEL programmed in this field addresses the following memory ranges: FFF0 0000h-FFF7 FFFFh FFB0 0000h-FFB7 FFFFh FWH_E8_IDSEL--R/W. IDSEL for two 512-KB Firmware Hub memory ranges. The IDSEL programmed in this field addresses the following memory ranges: FFE8 0000h-FFEF FFFFh FFA8 0000h-FFAF FFFFh FWH_E0_IDSEL--R/W. IDSEL for two 512-KB Firmware Hub memory ranges. The IDSEL programmed in this field addresses the following memory ranges: FFE0 0000h-FFE7 FFFFh FFA0 0000h-FFA7 FFFFh FWH_D8_IDSEL--R/W. IDSEL for two 512-KB Firmware Hub memory ranges. The IDSEL programmed in this field addresses the following memory ranges: FFD8 0000h-FFDF FFFFh FF98 0000h-FF9F FFFFh FWH_D0_IDSEL--R/W. IDSEL for two 512-KB Firmware Hub memory ranges. The IDSEL programmed in this field addresses the following memory ranges: FFD0 0000h-FFD7 FFFFh FF90 0000h-FF97 FFFFh FWH_C8_IDSEL--R/W. IDSEL for two 512-KB Firmware Hub memory ranges. The IDSEL programmed in this field addresses the following memory ranges: FFC8 0000h-FFCF FFFFh FF88 0000h-FF8F FFFFh FWH_C0_IDSEL--R/W. IDSEL for two 512-KB Firmware Hub memory ranges. The IDSEL programmed in this field addresses the following memory ranges: FFC0 0000h-FFC7 FFFFh FF80 0000h-FF87 FFFFh 485 LPC Interface Bridge Registers (D31:F0) 13.1.31 FWH_SEL2--Firmware Hub Select 2 Register (LPC I/F--D31:F0) Offset Address: D4h-D5h Default Value: 4567h Bit 15:12 11:8 7:4 3:0 486 Attribute: Size: R/W 16 bits Description FWH_70_IDSEL--R/W. IDSEL for two, 1-M Firmware Hub memory ranges. The IDSEL programmed in this field addresses the following memory ranges: FF70 0000h-FF7F FFFFh FF30 0000h-FF3F FFFFh FWH_60_IDSEL--R/W. IDSEL for two, 1-M Firmware Hub memory ranges. The IDSEL programmed in this field addresses the following memory ranges: FF60 0000h-FF6F FFFFh FF20 0000h-FF2F FFFFh FWH_50_IDSEL--R/W. IDSEL for two, 1-M Firmware Hub memory ranges. The IDSEL programmed in this field addresses the following memory ranges: FF50 0000h-FF5F FFFFh FF10 0000h-FF1F FFFFh FWH_40_IDSEL--R/W. IDSEL for two, 1-M Firmware Hub memory ranges. The IDSEL programmed in this field addresses the following memory ranges: FF40 0000h-FF4F FFFFh FF00 0000h-FF0F FFFFh Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.32 FWH_DEC_EN1--Firmware Hub Decode Enable Register (LPC I/F--D31:F0) Offset Address: D8h-D9h Default Value: FFCFh Bit Attribute: Size: R/W, RO 16 bits Description FWH_F8_EN--RO. This bit enables decoding two 512-KB Firmware Hub memory ranges, and one 128-KB memory range. 15 0 = Disable 1 = Enable the following ranges for the Firmware Hub FFF80000h-FFFFFFFFh FFB80000h-FFBFFFFFh FWH_F0_EN--R/W. This bit enables decoding two 512-KB Firmware Hub memory ranges. 14 0 = Disable. 1 = Enable the following ranges for the Firmware Hub: FFF00000h-FFF7FFFFh FFB00000h-FFB7FFFFh FWH_E8_EN--R/W. This bit enables decoding two 512-KB Firmware Hub memory ranges. 13 0 = Disable. 1 = Enable the following ranges for the Firmware Hub: FFE80000h-FFEFFFFh FFA80000h-FFAFFFFFh FWH_E0_EN--R/W. This bit enables decoding two 512-KB Firmware Hub memory ranges. 12 0 = Disable. 1 = Enable the following ranges for the Firmware Hub: FFE00000h-FFE7FFFFh FFA00000h-FFA7FFFFh FWH_D8_EN--R/W. This bit enables decoding two 512-KB Firmware Hub memory ranges. 11 0 = Disable. 1 = Enable the following ranges for the Firmware Hub FFD80000h-FFDFFFFFh FF980000h-FF9FFFFFh FWH_D0_EN--R/W. This bit enables decoding two 512-KB Firmware Hub memory ranges. 10 0 = Disable. 1 = Enable the following ranges for the Firmware Hub FFD00000h-FFD7FFFFh FF900000h-FF97FFFFh FWH_C8_EN--R/W. This bit enables decoding two 512-KB Firmware Hub memory ranges. 9 0 = Disable. 1 = Enable the following ranges for the Firmware Hub FFC80000h-FFCFFFFFh FF880000h-FF8FFFFFh FWH_C0_EN--R/W. This bit enables decoding two 512-KB Firmware Hub memory ranges. 8 Datasheet 0 = Disable. 1 = Enable the following ranges for the Firmware Hub FFC00000h-FFC7FFFFh FF800000h-FF87FFFFh 487 LPC Interface Bridge Registers (D31:F0) Bit Description FWH_Legacy_F_EN--R/W. This enables the decoding of the legacy 64KB range at F0000h-FFFFFh. 7 0 = Disable. 1 = Enable the following legacy ranges for the Firmware Hub F0000h-FFFFFh NOTE: The decode for the BIOS legacy F segment is enabled only by this bit and is not affected by the GEN_PMCON_1.iA64_EN bit. FWH_Legacy_E_EN--R/W. This enables the decoding of the legacy 64KB range at E0000h-EFFFFh. 6 5:4 0 = Disable. 1 = Enable the following legacy ranges for the Firmware Hub E0000h-EFFFFh NOTE: The decode for the BIOS legacy E segment is enabled only by this bit and is not affected by the GEN_PMCON_1.iA64_EN bit. Reserved FWH_70_EN--R/W. Enables decoding two 1-M Firmware Hub memory ranges. 3 0 = Disable. 1 = Enable the following ranges for the Firmware Hub FF70 0000h-FF7F FFFFh FF30 0000h-FF3F FFFFh FWH_60_EN--R/W. Enables decoding two 1-M Firmware Hub memory ranges. 2 0 = Disable. 1 = Enable the following ranges for the Firmware Hub FF60 0000h-FF6F FFFFh FF20 0000h-FF2F FFFFh FWH_50_EN--R/W. Enables decoding two 1-M Firmware Hub memory ranges. 1 0 = Disable. 1 = Enable the following ranges for the Firmware Hub FF50 0000h-FF5F FFFFh FF10 0000h-FF1F FFFFh FWH_40_EN--R/W. Enables decoding two 1-M Firmware Hub memory ranges. 0 0 = Disable. 1 = Enable the following ranges for the Firmware Hub FF40 0000h-FF4F FFFFh FF00 0000h-FF0F FFFFh NOTE: This register effects the BIOS decode regardless of whether the BIOS is resident on LPC or SPI. The concept of Feature Space does not apply to SPI-based flash. The PCH simply decodes these ranges as memory accesses when enabled for the SPI flash interface. 488 Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.33 BIOS_CNTL--BIOS Control Register (LPC I/F--D31:F0) Offset Address: DCh Default Value: 20h Lockable: No Attribute: Size: Power Well: Bit 7:6 R/WLO, R/W, RO 8 bit Core Description Reserved SMM BIOS Write Protect Disable (SMM_BWP)--R/WLO. This bit set defines when the BIOS region can be written by the host. 5 4 0 = BIOS region SMM protection is disabled. The BIOS Region is writable regardless if Processors are in SMM or not. (Set this field to 0 for legacy behavior) 1 = BIOS region SMM protection is enabled. The BIOS Region is not writable unless all Processors are in SMM. Top Swap Status (TSS)--RO. This bit provides a read-only path to view the state of the Top Swap bit that is at offset 3414h, bit 0. SPI Read Configuration (SRC)--R/W. This 2-bit field controls two policies related to BIOS reads on the SPI interface: Bit 3- Prefetch Enable Bit 2- Cache Disable Settings are summarized below: p 00b No prefetching, but caching enabled. 64B demand reads load the read buffer cache with "valid" data, allowing repeated code fetches to the same line to complete quickly 01b No prefetching and no caching. One-to-one correspondence of host BIOS reads to SPI cycles. This value can be used to invalidate the cache. 10b Prefetching and Caching enabled. This mode is used for long sequences of short reads to consecutive addresses (i.e, shadowing). 11b Reserved. This is an invalid configuration, caching must be enabled when prefetching is enabled. 3:2 BIOS Lock Enable (BLE)--R/WLO. 1 0 = Setting the BIOSWE will not cause SMIs. 1 = Enables setting the BIOSWE bit to cause SMIs. Once set, this bit can only be cleared by a PLTRST# BIOS Write Enable (BIOSWE)--R/W. 0 Datasheet 0 = Only read cycles result in Firmware Hub I/F cycles. 1 = Access to the BIOS space is enabled for both read and write cycles. When this bit is written from a 0 to a 1 and BIOS Lock Enable (BLE) is also set, an SMI# is generated. This ensures that only SMI code can update BIOS. 489 LPC Interface Bridge Registers (D31:F0) 13.1.34 FDCAP--Feature Detection Capability ID Register (LPC I/F--D31:F0) Offset Address: E0h-E1h Default Value: 0009h Bit 13.1.35 15:8 Next Item Pointer (NEXT)--RO. Configuration offset of the next Capability Item. 00h indicates the last item in the Capability List. 7:0 Capability ID--RO. Indicates a Vendor Specific Capability FDLEN--Feature Detection Capability Length Register (LPC I/F--D31:F0) Bit 7:0 Attribute: Size: Power Well: RO 8 bit Core Description Capability Length--RO. Indicates the length of this Vendor Specific capability, as required by PCI Specification. FDVER--Feature Detection Version Register (LPC I/F--D31:F0) Offset Address: E3h Default Value: 10h Bit 490 RO 16 bit Core Description Offset Address: E2h Default Value: 0Ch 13.1.36 Attribute: Size: Power Well: Attribute: Size: Power Well: RO 8 bit Core Description 7:4 Vendor-Specific Capability ID--RO. A value of 1h in this 4-bit field identifies this Capability as Feature Detection Type. This field allows software to differentiate the Feature Detection Capability from other Vendor-Specific capabilities 3:0 Capability Version--RO. This field indicates the version of the Feature Detection capability Datasheet LPC Interface Bridge Registers (D31:F0) 13.1.37 FDVCT--Feature Vector Register (LPC I/F--D31:F0) Offset Address: E4h-EBh Default Value: See Description Bit 63:45 Attribute: Size: Power Well: RO 64 bit Core Description Reserved Intel(R) Identity Protection Technology--RO 44 43:14 0 = Capable 1 = Disabled Reserved USB* 2.0 Ports 6 and 7--RO 13 0 = Capable 1 = Disabled 12 Reserved PCI Express* Ports 7and 8--RO 11 10:7 0 = Capable 1 = Disabled Reserved SATA Ports 2 and 3--RO 6 0 = Capable 1 = Disabled SATA RAID 0/1/5/10 Capability--RO 5 4:0 13.1.38 0 = Capable 1 = Disabled Reserved RCBA--Root Complex Base Address Register (LPC I/F--D31:F0) Offset Address: F0-F3h Default Value: 00000000h Bit 31:14 13:1 0 Datasheet Attribute: Size: R/W 32 bit Description Base Address (BA)--R/W. Base Address for the root complex register block decode range. This address is aligned on a 16-KB boundary. Reserved Enable (EN)--R/W. When set, this bit enables the range specified in BA to be claimed as the Root Complex Register Block. 491 LPC Interface Bridge Registers (D31:F0) 13.2 DMA I/O Registers Table 13-2. DMA Registers (Sheet 1 of 2) 492 Port Alias 00h 10h 01h 11h Register Name Default Type Channel 0 DMA Base & Current Address Undefined R/W Channel 0 DMA Base & Current Count Undefined R/W 02h 12h Channel 1 DMA Base & Current Address Undefined R/W 03h 13h Channel 1 DMA Base & Current Count Undefined R/W 04h 14h Channel 2 DMA Base & Current Address Undefined R/W 05h 15h Channel 2 DMA Base & Current Count Undefined R/W 06h 16h Channel 3 DMA Base & Current Address Undefined R/W 07h 17h Channel 3 DMA Base & Current Count Undefined R/W 08h 18h Channel 0-3 DMA Command Undefined WO Channel 0-3 DMA Status Undefined RO 0Ah 1Ah Channel 0-3 DMA Write Single Mask 000001XXb WO 0Bh 1Bh Channel 0-3 DMA Channel Mode 000000XXb WO 0Ch 1Ch Channel 0-3 DMA Clear Byte Pointer Undefined WO 0Dh 1Dh Channel 0-3 DMA Master Clear Undefined WO 0Eh 1Eh Channel 0-3 DMA Clear Mask Undefined WO 0Fh 1Fh Channel 0-3 DMA Write All Mask 0Fh R/W 80h 90h Reserved Page Undefined R/W 81h 91h Channel 2 DMA Memory Low Page Undefined R/W 82h -- Channel 3 DMA Memory Low Page Undefined R/W 83h 93h Channel 1 DMA Memory Low Page Undefined R/W 84h-86h 94h-96h Reserved Pages Undefined R/W 87h 97h Channel 0 DMA Memory Low Page Undefined R/W 88h 98h Reserved Page Undefined R/W 89h 99h Channel 6 DMA Memory Low Page Undefined R/W 8Ah 9Ah Channel 7 DMA Memory Low Page Undefined R/W 8Bh 9Bh Channel 5 DMA Memory Low Page Undefined R/W 8Ch-8Eh 9Ch-9Eh Reserved Page Undefined R/W 8Fh 9Fh Refresh Low Page Undefined R/W C0h C1h Channel 4 DMA Base & Current Address Undefined R/W C2h C3h Channel 4 DMA Base & Current Count Undefined R/W C4h C5h Channel 5 DMA Base & Current Address Undefined R/W C6h C7h Channel 5 DMA Base & Current Count Undefined R/W C8h C9h Channel 6 DMA Base & Current Address Undefined R/W CAh CBh Channel 6 DMA Base & Current Count Undefined R/W CCh CDh Channel 7 DMA Base & Current Address Undefined R/W CEh CFh Channel 7 DMA Base & Current Count Undefined R/W Datasheet LPC Interface Bridge Registers (D31:F0) Table 13-2. DMA Registers (Sheet 2 of 2) 13.2.1 Port Alias D0h D1h D4h D5h D6h D8h Register Name Default Type Channel 4-7 DMA Command Undefined WO Channel 4-7 DMA Status Undefined RO Channel 4-7 DMA Write Single Mask 000001XXb WO D7h Channel 4-7 DMA Channel Mode 000000XXb WO D9h Channel 4-7 DMA Clear Byte Pointer Undefined WO DAh DBh Channel 4-7 DMA Master Clear Undefined WO DCh DDh Channel 4-7 DMA Clear Mask Undefined WO DEh DFh Channel 4-7 DMA Write All Mask 0Fh R/W DMABASE_CA--DMA Base and Current Address Registers I/O Address: Default Value: Lockable: Bit Ch. #0 = 00h; Ch. #1 = 02h Ch. #2 = 04h; Ch. #3 = 06h Ch. #5 = C4h Ch. #6 = C8h Ch. #7 = CCh; Undefined No Attribute: R/W Size: 16 bit (per channel), but accessed in two 8-bit quantities Power Well:Core Description Base and Current Address--R/W. This register determines the address for the transfers to be performed. The address specified points to two separate registers. On writes, the value is stored in the Base Address register and copied to the Current Address register. On reads, the value is returned from the Current Address register. 15:0 The address increments/decrements in the Current Address register after each transfer, depending on the mode of the transfer. If the channel is in auto-initialize mode, the Current Address register will be reloaded from the Base Address register after a terminal count is generated. For transfers to/from a 16-bit slave (channels 5-7), the address is shifted left one bit location. Bit 15 will be shifted into Bit 16. The register is accessed in 8 bit quantities. The byte is pointed to by the current byte pointer flip/flop. Before accessing an address register, the byte pointer flip/flop should be cleared to ensure that the low byte is accessed first Datasheet 493 LPC Interface Bridge Registers (D31:F0) 13.2.2 DMABASE_CC--DMA Base and Current Count Registers I/O Address: Default Value: Lockable: Bit Ch. #0 = 01h; Ch. #1 = 03h Ch. #2 = 05h; Ch. #3 = 07h Ch. #5 = C6h; Ch. #6 = CAh Ch. #7 = CEh; Undefined No Attribute: R/W Size: 16-bit (per channel), but accessed in two 8-bit quantities Power Well:Core Description Base and Current Count--R/W. This register determines the number of transfers to be performed. The address specified points to two separate registers. On writes, the value is stored in the Base Count register and copied to the Current Count register. On reads, the value is returned from the Current Count register. 15:0 The actual number of transfers is one more than the number programmed in the Base Count Register (that is, programming a count of 4h results in 5 transfers). The count is decrements in the Current Count register after each transfer. When the value in the register rolls from 0 to FFFFh, a terminal count is generated. If the channel is in autoinitialize mode, the Current Count register will be reloaded from the Base Count register after a terminal count is generated. For transfers to/from an 8-bit slave (channels 0-3), the count register indicates the number of bytes to be transferred. For transfers to/from a 16-bit slave (channels 5-7), the count register indicates the number of words to be transferred. The register is accessed in 8 bit quantities. The byte is pointed to by the current byte pointer flip/flop. Before accessing a count register, the byte pointer flip/flop should be cleared to ensure that the low byte is accessed first. 13.2.3 DMAMEM_LP--DMA Memory Low Page Registers I/O Address: Default Value: Lockable: 494 Ch. #0 = 87h; Ch. #1 = 83h Ch. #2 = 81h; Ch. #3 = 82h Ch. #5 = 8Bh; Ch. #6 = 89h Ch. #7 = 8Ah; Undefined No Attribute: Size: Power Well: R/W 8-bit Core Bit Description 7:0 DMA Low Page (ISA Address bits [23:16])--R/W. This register works in conjunction with the DMA controller's Current Address Register to define the complete 24-bit address for the DMA channel. This register remains static throughout the DMA transfer. Bit 16 of this register is ignored when in 16 bit I/O count by words mode as it is replaced by the bit 15 shifted out from the current address register. Datasheet LPC Interface Bridge Registers (D31:F0) 13.2.4 DMACMD--DMA Command Register I/O Address: Default Value: Lockable: Ch. #0-3 = 08h; Ch. #4-7 = D0h Undefined No Bit 7:5 4 Attribute: Size: Power Well: WO 8-bit Core Description Reserved. Must be 0. DMA Group Arbitration Priority--WO. Each channel group is individually assigned either fixed or rotating arbitration priority. At part reset, each group is initialized in fixed priority. 0 = Fixed priority to the channel group 1 = Rotating priority to the group. 3 Reserved. Must be 0. DMA Channel Group Enable--WO. Both channel groups are enabled following part reset. 2 1:0 13.2.5 0 = Enable the DMA channel group. 1 = Disable. Disabling channel group 4-7 also disables channel group 0-3, which is cascaded through channel 4. Reserved. Must be 0. DMASTA--DMA Status Register I/O Address: Default Value: Lockable: Ch. #0-3 = 08h; Ch. #4-7 = D0h Undefined No Attribute: Size: Power Well: RO 8-bit Core Bit Description 7:4 Channel Request Status--RO. When a valid DMA request is pending for a channel, the corresponding bit is set to 1. When a DMA request is not pending for a particular channel, the corresponding bit is set to 0. The source of the DREQ may be hardware or a software request. Note that channel 4 is the cascade channel, so the request status of channel 4 is a logical OR of the request status for channels 0 through 3. 4 = Channel 0 5 = Channel 1 (5) 6 = Channel 2 (6) 7 = Channel 3 (7) Channel Terminal Count Status--RO. When a channel reaches terminal count (TC), its status bit is set to 1. If TC has not been reached, the status bit is set to 0. Channel 4 is programmed for cascade, so the TC bit response for channel 4 is irrelevant: 3:0 0 = Channel 0 1 = Channel 1 (5) 2 = Channel 2 (6) 3 = Channel 3 (7) Datasheet 495 LPC Interface Bridge Registers (D31:F0) 13.2.6 DMA_WRSMSK--DMA Write Single Mask Register I/O Address: Default Value: Lockable: Ch. #0-3 = 0Ah; Ch. #4-7 = D4h 0000 01xx No Bit 7:3 Attribute: Size: Power Well: WO 8-bit Core Description Reserved. Must be 0. Channel Mask Select--WO. 2 0 = Enable DREQ for the selected channel. The channel is selected through bits [1:0]. Therefore, only one channel can be masked / unmasked at a time. 1 = Disable DREQ for the selected channel. DMA Channel Select--WO. These bits select the DMA Channel Mode Register to program. 1:0 00 = Channel 0 (4) 01 = Channel 1 (5) 10 = Channel 2 (6) 11 = Channel 3 (7) 496 Datasheet LPC Interface Bridge Registers (D31:F0) 13.2.7 DMACH_MODE--DMA Channel Mode Register I/O Address: Default Value: Lockable: Ch. #0-3 = 0Bh; Ch. #4-7 = D6h 0000 00xx No Bit Attribute: Size: Power Well: WO 8-bit Core Description DMA Transfer Mode--WO. Each DMA channel can be programmed in one of four different modes: 7:6 00 = Demand mode 01 = Single mode 10 = Reserved 11 = Cascade mode 5 Address Increment/Decrement Select--WO. This bit controls address increment/ decrement during DMA transfers. 0 = Address increment. (default after part reset or Master Clear) 1 = Address decrement. Autoinitialize Enable--WO. 4 0 = Autoinitialize feature is disabled and DMA transfers terminate on a terminal count. A part reset or Master Clear disables autoinitialization. 1 = DMA restores the Base Address and Count registers to the current registers following a terminal count (TC). DMA Transfer Type--WO. These bits represent the direction of the DMA transfer. When the channel is programmed for cascade mode, (bits[7:6] = 11) the transfer type is irrelevant. 3:2 00 = Verify - No I/O or memory strobes generated 01 = Write - Data transferred from the I/O devices to memory 10 = Read - Data transferred from memory to the I/O device 11 = Invalid DMA Channel Select--WO. These bits select the DMA Channel Mode Register that will be written by bits [7:2]. 1:0 00 = Channel 0 (4) 01 = Channel 1 (5) 10 = Channel 2 (6) 11 = Channel 3 (7) Datasheet 497 LPC Interface Bridge Registers (D31:F0) 13.2.8 DMA Clear Byte Pointer Register I/O Address: Default Value: Lockable: 13.2.9 WO 8-bit Core Description 7:0 Clear Byte Pointer--WO. No specific pattern. Command enabled with a write to the I/ O port address. Writing to this register initializes the byte pointer flip/flop to a known state. It clears the internal latch used to address the upper or lower byte of the 16-bit Address and Word Count Registers. The latch is also cleared by part reset and by the Master Clear command. This command precedes the first access to a 16-bit DMA controller register. The first access to a 16-bit register will then access the significant byte, and the second access automatically accesses the most significant byte. DMA Master Clear Register Default Value: Ch. #0-3 = 0Dh; Ch. #4-7 = DAh xxxx xxxx Attribute: Size: WO 8-bit Bit Description 7:0 Master Clear--WO. No specific pattern. Enabled with a write to the port. This has the same effect as the hardware Reset. The Command, Status, Request, and Byte Pointer flip/flop registers are cleared and the Mask Register is set. DMA_CLMSK--DMA Clear Mask Register I/O Address: Default Value: Lockable: 498 Attribute: Size: Power Well: Bit I/O Address: 13.2.10 Ch. #0-3 = 0Ch; Ch. #4-7 = D8h xxxx xxxx No Ch. #0-3 = 0Eh; Ch. #4-7 = DCh xxxx xxxx No Attribute: Size: Power Well: WO 8-bit Core Bit Description 7:0 Clear Mask Register--WO. No specific pattern. Command enabled with a write to the port. Datasheet LPC Interface Bridge Registers (D31:F0) 13.2.11 DMA_WRMSK--DMA Write All Mask Register I/O Address: Default Value: Lockable: Ch. #0-3 = 0Fh; Ch. #4-7 = DEh 0000 1111 No Bit 7:4 Attribute: Size: Power Well: R/W 8-bit Core Description Reserved. Must be 0. Channel Mask Bits--R/W. This register permits all four channels to be simultaneously enabled/disabled instead of enabling/disabling each channel individually, as is the case with the Mask Register - Write Single Mask Bit. In addition, this register has a read path to allow the status of the channel mask bits to be read. A channel's mask bit is automatically set to 1 when the Current Byte/Word Count Register reaches terminal count (unless the channel is in auto-initialization mode). 3:0 Setting the bit(s) to a 1 disables the corresponding DREQ(s). Setting the bit(s) to a 0 enables the corresponding DREQ(s). Bits [3:0] are set to 1 upon part reset or Master Clear. When read, bits [3:0] indicate the DMA channel [3:0] ([7:4]) mask status. Bit 0 = Channel 0 (4)1 = Masked, 0 = Not Masked Bit 1 = Channel 1 (5)1 = Masked, 0 = Not Masked Bit 2 = Channel 2 (6)1 = Masked, 0 = Not Masked Bit 3 = Channel 3 (7)1 = Masked, 0 = Not Masked NOTE: Disabling channel 4 also disables channels 0-3 due to the cascade of channels 0-3 through channel 4. 13.3 Timer I/O Registers Port Aliases 40h 50h 41h 51h 42h 52h 43h 53h Register Name Counter 0 Interval Time Status Byte Format Counter 0 Counter Access Port Counter 1 Interval Time Status Byte Format Counter 1 Counter Access Port Counter 2 Interval Time Status Byte Format Counter 2 Counter Access Port Timer Control Word Timer Control Word Register Counter Latch Command Datasheet Default Value Type 0XXXXXXXb RO Undefined R/W 0XXXXXXXb RO Undefined R/W 0XXXXXXXb RO Undefined R/W Undefined WO XXXXXXX0b WO X0h WO 499 LPC Interface Bridge Registers (D31:F0) 13.3.1 TCW--Timer Control Word Register I/O Address: Default Value: 43h All bits undefined Attribute: Size: WO 8 bits This register is programmed prior to any counter being accessed to specify counter modes. Following part reset, the control words for each register are undefined and each counter output is 0. Each timer must be programmed to bring it into a known state. Bit Description Counter Select--WO. The Counter Selection bits select the counter the control word acts upon as shown below. The Read Back Command is selected when bits[7:6] are both 1. 7:6 00 = Counter 0 select 01 = Counter 1 select 10 = Counter 2 select 11 = Read Back Command Read/Write Select--WO. These bits are the read/write control bits. The actual counter programming is done through the counter port (40h for counter 0, 41h for counter 1, and 42h for counter 2). 5:4 00 = Counter Latch Command 01 = Read/Write Least Significant Byte (LSB) 10 = Read/Write Most Significant Byte (MSB) 11 = Read/Write LSB then MSB Counter Mode Selection--WO. These bits select one of six possible modes of operation for the selected counter. 3:1 000b Mode 0 Out signal on end of count (=0) 001b Mode 1 Hardware retriggerable oneshot x10b Mode 2 Rate generator (divide by n counter) x11b Mode 3 Square wave output 100b Mode 4 Software triggered strobe 101b Mode 5 Hardware triggered strobe Binary/BCD Countdown Select--WO. 0 0 = Binary countdown is used. The largest possible binary count is 216 1 = Binary coded decimal (BCD) count is used. The largest possible BCD count is 104 There are two special commands that can be issued to the counters through this register, the Read Back Command and the Counter Latch Command. When these commands are chosen, several bits within this register are redefined. These register formats are described below: 500 Datasheet LPC Interface Bridge Registers (D31:F0) RDBK_CMD--Read Back Command The Read Back Command is used to determine the count value, programmed mode, and current states of the OUT pin and Null count flag of the selected counter or counters. Status and/or count may be latched in any or all of the counters by selecting the counter during the register write. The count and status remain latched until read, and further latch commands are ignored until the count is read. Both count and status of the selected counters may be latched simultaneously by setting both bit 5 and bit 4 to 0. If both are latched, the first read operation from that counter returns the latched status. The next one or two reads, depending on whether the counter is programmed for one or two byte counts, returns the latched count. Subsequent reads return an unlatched count. Bit 7:6 Description Read Back Command. Must be 11 to select the Read Back Command Latch Count of Selected Counters. 5 0 = Current count value of the selected counters will be latched 1 = Current count will not be latched Latch Status of Selected Counters. 4 0 = Status of the selected counters will be latched 1 = Status will not be latched 3 Counter 2 Select. 1 = Counter 2 count and/or status will be latched 2 Counter 1 Select. 1 = Counter 1 count and/or status will be latched 1 Counter 0 Select. 1 = Counter 0 count and/or status will be latched. 0 Reserved. Must be 0. LTCH_CMD--Counter Latch Command The Counter Latch Command latches the current count value. This command is used to insure that the count read from the counter is accurate. The count value is then read from each counter's count register through the Counter Ports Access Ports Register (40h for counter 0, 41h for counter 1, and 42h for counter 2). The count must be read according to the programmed format; that is, if the counter is programmed for two byte counts, two bytes must be read. The two bytes do not have to be read one right after the other (read, write, or programming operations for other counters may be inserted between the reads). If a counter is latched once and then latched again before the count is read, the second Counter Latch Command is ignored. Bit Description Counter Selection. These bits select the counter for latching. If "11" is written, then the write is interpreted as a read back command. 7:6 00 = Counter 0 01 = Counter 1 10 = Counter 2 5:4 3:0 Datasheet Counter Latch Command. 00 = Selects the Counter Latch Command. Reserved. Must be 0. 501 LPC Interface Bridge Registers (D31:F0) 13.3.2 SBYTE_FMT--Interval Timer Status Byte Format Register I/O Address: Default Value: Counter 0 = 40h, Counter 1 = 41h, Attribute: Counter 2 = 42h Size: Bits[6:0] undefined, Bit 7=0 RO 8 bits per counter Each counter's status byte can be read following a Read Back Command. If latch status is chosen (bit 4=0, Read Back Command) as a read back option for a given counter, the next read from the counter's Counter Access Ports Register (40h for counter 0, 41h for counter 1, and 42h for counter 2) returns the status byte. The status byte returns the following: Bit Description Counter OUT Pin State--RO. 7 6 0 = OUT pin of the counter is also a 0 1 = OUT pin of the counter is also a 1 Count Register Status--RO. This bit indicates when the last count written to the Count Register (CR) has been loaded into the counting element (CE). The exact time this happens depends on the counter mode, but until the count is loaded into the counting element (CE), the count value will be incorrect. 0 = Count has been transferred from CR to CE and is available for reading. 1 = Null Count. Count has not been transferred from CR to CE and is not yet available for reading. Read/Write Selection Status--RO. These reflect the read/write selection made through bits[5:4] of the control register. The binary codes returned during the status read match the codes used to program the counter read/write selection. 5:4 00 = Counter Latch Command 01 = Read/Write Least Significant Byte (LSB) 10 = Read/Write Most Significant Byte (MSB) 11 = Read/Write LSB then MSB Mode Selection Status--RO. These bits return the counter mode programming. The binary code returned matches the code used to program the counter mode, as listed under the bit function above. 000 = Mode 0--Out signal on end of count (=0) 3:1 001 = Mode 1--Hardware retriggerable one-shot x10 = Mode 2--Rate generator (divide by n counter) x11 = Mode 3--Square wave output 100 = Mode 4--Software triggered strobe 101 = Mode 5--Hardware triggered strobe Countdown Type Status--RO. This bit reflects the current countdown type. 0 502 0 = Binary countdown 1 = Binary Coded Decimal (BCD) countdown. Datasheet LPC Interface Bridge Registers (D31:F0) 13.3.3 Counter Access Ports Register I/O Address: Counter 0 - 40h, Counter 1 - 41h, Counter 2 - 42h All bits undefined Default Value: Bit 7:0 Attribute: R/W Size: 8 bit Description Counter Port--R/W. Each counter port address is used to program the 16-bit Count Register. The order of programming, either LSB only, MSB only, or LSB then MSB, is defined with the Interval Counter Control Register at port 43h. The counter port is also used to read the current count from the Count Register, and return the status of the counter programming following a Read Back Command. 13.4 8259 Interrupt Controller (PIC) Registers 13.4.1 Interrupt Controller I/O MAP The interrupt controller registers are located at 20h and 21h for the master controller (IRQ 0-7), and at A0h and A1h for the slave controller (IRQ 8-13). These registers have multiple functions, depending upon the data written to them. Table 13-3 shows the different register possibilities for each address. Table 13-3. PIC Registers Port Aliases Type Undefined WO Master PIC ICW1 Init. Cmd Word 1 2Ch, 30h, Master PIC OCW2 Op Ctrl Word 2 001XXXXXb WO 34h, 38h, 3Ch Master PIC OCW3 Op Ctrl Word 3 X01XXX10b WO Master PIC ICW2 Init. Cmd Word 2 Undefined WO 2Dh, 31h, Master PIC ICW3 Init. Cmd Word 3 Undefined WO 35h, 39h, 3Dh Master PIC ICW4 Init. Cmd Word 4 01h WO Master PIC OCW1 Op Ctrl Word 1 00h R/W A4h, A8h, Slave PIC ICW1 Init. Cmd Word 1 Undefined WO ACh, B0h, Slave PIC OCW2 Op Ctrl Word 2 001XXXXXb WO Slave PIC OCW3 Op Ctrl Word 3 X01XXX10b WO Slave PIC ICW2 Init. Cmd Word 2 Undefined WO ADh, B1h, Slave PIC ICW3 Init. Cmd Word 3 Undefined WO B5h, B9h, BDh Slave PIC ICW4 Init. Cmd Word 4 01h WO Slave PIC OCW1 Op Ctrl Word 1 00h R/W 4D0h - Master PIC Edge/Level Triggered 00h R/W 4D1h - Slave PIC Edge/Level Triggered 00h R/W 25h, 29h, 21h A0h B4h, B8h, BCh A5h, A9h, A1h Datasheet Default Value 24h, 28h, 20h Note: Register Name See note addressing active-low interrupt sources in 8259 Interrupt Controllers section (Chapter 5.8). 503 LPC Interface Bridge Registers (D31:F0) 13.4.2 ICW1--Initialization Command Word 1 Register Offset Address: Master Controller - 20h Slave Controller - A0h Default Value: All bits undefined Attribute: Size: WO 8 bit /controller A write to Initialization Command Word 1 starts the interrupt controller initialization sequence, during which the following occurs: 1. The Interrupt Mask register is cleared. 2. IRQ7 input is assigned priority 7. 3. The slave mode address is set to 7. 4. Special mask mode is cleared and Status Read is set to IRR. Once this write occurs, the controller expects writes to ICW2, ICW3, and ICW4 to complete the initialization sequence. Bit 7:5 ICW/OCW Select--WO. These bits are MCS-85 specific, and not needed. 000 = Should be programmed to "000" 4 ICW/OCW Select--WO. 1 = This bit must be a 1 to select ICW1 and enable the ICW2, ICW3, and ICW4 sequence. 3 Edge/Level Bank Select (LTIM)--WO. Disabled. Replaced by the edge/level triggered control registers (ELCR, D31:F0:4D0h, D31:F0:4D1h). 2 1 0 504 Description ADI--WO. 0 = Ignored for the PCH. Should be programmed to 0. Single or Cascade (SNGL)--WO. 0 = Must be programmed to a 0 to indicate two controllers operating in cascade mode. ICW4 Write Required (IC4)--WO. 1 = This bit must be programmed to a 1 to indicate that ICW4 needs to be programmed. Datasheet LPC Interface Bridge Registers (D31:F0) 13.4.3 ICW2--Initialization Command Word 2 Register Offset Address: Master Controller - 21h Slave Controller - A1h Default Value: All bits undefined Attribute: Size: WO 8 bit /controller ICW2 is used to initialize the interrupt controller with the five most significant bits of the interrupt vector address. The value programmed for bits[7:3] is used by the processor to define the base address in the interrupt vector table for the interrupt routines associated with each IRQ on the controller. Typical ISA ICW2 values are 08h for the master controller and 70h for the slave controller. Bit 7:3 Description Interrupt Vector Base Address--WO. Bits [7:3] define the base address in the interrupt vector table for the interrupt routines associated with each interrupt request level input. Interrupt Request Level--WO. When writing ICW2, these bits should all be 0. During an interrupt acknowledge cycle, these bits are programmed by the interrupt controller with the interrupt to be serviced. This is combined with bits [7:3] to form the interrupt vector driven onto the data bus during the second INTA# cycle. The code is a three bit binary code: 2:0 13.4.4 000b IRQ0 001b IRQ1 IRQ9 010b IRQ2 IRQ10 011b IRQ3 IRQ11 100b IRQ4 IRQ12 101b IRQ5 IRQ13 110b IRQ6 IRQ14 111b IRQ7 IRQ15 ICW3--Master Controller Initialization Command Word 3 Register Offset Address: 21h Default Value: All bits undefined Bit 7:3 2 1:0 Datasheet IRQ8 Attribute: Size: WO 8 bits Description 0 = These bits must be programmed to 0. Cascaded Interrupt Controller IRQ Connection--WO. This bit indicates that the slave controller is cascaded on IRQ2. When IRQ8#-IRQ15 is asserted, it goes through the slave controller's priority resolver. The slave controller's INTR output onto IRQ2. IRQ2 then goes through the master controller's priority solver. If it wins, the INTR signal is asserted to the processor, and the returning interrupt acknowledge returns the interrupt vector for the slave controller. 1 = This bit must always be programmed to a 1. 0 = These bits must be programmed to 0. 505 LPC Interface Bridge Registers (D31:F0) 13.4.5 ICW3--Slave Controller Initialization Command Word 3 Register Offset Address: A1h Default Value: All bits undefined Bit 13.4.6 Attribute: Size: WO 8 bits Description 7:3 0 = These bits must be programmed to 0. 2:0 Slave Identification Code--WO. These bits are compared against the slave identification code broadcast by the master controller from the trailing edge of the first internal INTA# pulse to the trailing edge of the second internal INTA# pulse. These bits must be programmed to 02h to match the code broadcast by the master controller. When 02h is broadcast by the master controller during the INTA# sequence, the slave controller assumes responsibility for broadcasting the interrupt vector. ICW4--Initialization Command Word 4 Register Offset Address: Master Controller - 021h Slave Controller - 0A1h Default Value: 01h Bit 7:5 Attribute: Size: WO 8 bits Description 0 = These bits must be programmed to 0. Special Fully Nested Mode (SFNM)--WO. 4 3 2 0 = Should normally be disabled by writing a 0 to this bit. 1 = Special fully nested mode is programmed. Buffered Mode (BUF)--WO. 0 = Must be programmed to 0 for the PCH. This is non-buffered mode. Master/Slave in Buffered Mode--WO. Not used. 0 = Should always be programmed to 0. Automatic End of Interrupt (AEOI)--WO. 1 0 506 0 = This bit should normally be programmed to 0. This is the normal end of interrupt. 1 = Automatic End of Interrupt (AEOI) mode is programmed. Microprocessor Mode--WO. 1 = Must be programmed to 1 to indicate that the controller is operating in an Intel Architecture-based system. Datasheet LPC Interface Bridge Registers (D31:F0) 13.4.7 OCW1--Operational Control Word 1 (Interrupt Mask) Register Offset Address: Master Controller - 021h Slave Controller - 0A1h Default Value: 00h 13.4.8 Attribute: Size: R/W 8 bits Bit Description 7:0 Interrupt Request Mask--R/W. When a 1 is written to any bit in this register, the corresponding IRQ line is masked. When a 0 is written to any bit in this register, the corresponding IRQ mask bit is cleared, and interrupt requests will again be accepted by the controller. Masking IRQ2 on the master controller will also mask the interrupt requests from the slave controller. OCW2--Operational Control Word 2 Register Offset Address: Master Controller - 020h Attribute: Slave Controller - 0A0h Size: Default Value: Bit[4:0]=undefined, Bit[7:5]=001 WO 8 bits Following a part reset or ICW initialization, the controller enters the fully nested mode of operation. Non-specific EOI without rotation is the default. Both rotation mode and specific EOI mode are disabled following initialization. Bit Description Rotate and EOI Codes (R, SL, EOI)--WO. These three bits control the Rotate and End of Interrupt modes and combinations of the two. 000 = Rotate in Auto EOI Mode (Clear) 001 = Non-specific EOI command 010 = No Operation 7:5 011 = *Specific EOI Command 100 = Rotate in Auto EOI Mode (Set) 101 = Rotate on Non-Specific EOI Command 110 = *Set Priority Command 111 = *Rotate on Specific EOI Command *L0 - L2 Are Used 4:3 OCW2 Select--WO. When selecting OCW2, bits 4:3 = 00 Interrupt Level Select (L2, L1, L0)--WO. L2, L1, and L0 determine the interrupt level acted upon when the SL bit is active. A simple binary code, outlined below, selects the channel for the command to act upon. When the SL bit is inactive, these bits do not have a defined function; programming L2, L1 and L0 to 0 is sufficient in this case. 2:0 Datasheet 000b IRQ0/8 000b 001b IRQ1/9 001b IRQ4/12 IRQ5/13 010b IRQ2/10 010b IRQ6/14 011b IRQ3/11 011b IRQ7/15 507 LPC Interface Bridge Registers (D31:F0) 13.4.9 OCW3--Operational Control Word 3 Register Offset Address: Master Controller - 020h Attribute:WO Slave Controller - 0A0h Size: 8 bits Default Value: Bit[6,0]=0, Bit[7,4:2]=undefined, Bit[5,1]=1 Bit Description 7 Reserved. Must be 0. 6 Special Mask Mode (SMM)--WO. 1 = The Special Mask Mode can be used by an interrupt service routine to dynamically alter the system priority structure while the routine is executing, through selective enabling/disabling of the other channel's mask bits. Bit 5, the ESMM bit, must be set for this bit to have any meaning. Enable Special Mask Mode (ESMM)--WO. 5 4:3 0 = Disable. The SMM bit becomes a "don't care". 1 = Enable the SMM bit to set or reset the Special Mask Mode. OCW3 Select--WO. When selecting OCW3, bits 4:3 = 01 Poll Mode Command--WO. 2 1:0 0 = Disable. Poll Command is not issued. 1 = Enable. The next I/O read to the interrupt controller is treated as an interrupt acknowledge cycle. An encoded byte is driven onto the data bus, representing the highest priority level requesting service. Register Read Command--WO. These bits provide control for reading the In-Service Register (ISR) and the Interrupt Request Register (IRR). When bit 1=0, bit 0 will not affect the register read selection. When bit 1=1, bit 0 selects the register status returned following an OCW3 read. If bit 0=0, the IRR will be read. If bit 0=1, the ISR will be read. Following ICW initialization, the default OCW3 port address read will be "read IRR". To retain the current selection (read ISR or read IRR), always write a 0 to bit 1 when programming this register. The selected register can be read repeatedly without reprogramming OCW3. To select a new status register, OCW3 must be reprogrammed prior to attempting the read. 00 = No Action 01 = No Action 10 = Read IRQ Register 11 = Read IS Register 508 Datasheet LPC Interface Bridge Registers (D31:F0) 13.4.10 ELCR1--Master Controller Edge/Level Triggered Register Offset Address: 4D0h Default Value: 00h Attribute: Size: R/W 8 bits In edge mode, (bit[x] = 0), the interrupt is recognized by a low to high transition. In level mode (bit[x] = 1), the interrupt is recognized by a high level. The cascade channel, IRQ2, the heart beat timer (IRQ0), and the keyboard controller (IRQ1), cannot be put into level mode. Bit Description IRQ7 ECL--R/W. 7 0 = Edge. 1 = Level. IRQ6 ECL--R/W. 6 0 = Edge. 1 = Level. IRQ5 ECL--R/W. 5 0 = Edge. 1 = Level. IRQ4 ECL--R/W. 4 0 = Edge. 1 = Level. IRQ3 ECL--R/W. 3 2:0 Datasheet 0 = Edge. 1 = Level. Reserved. Must be 0. 509 LPC Interface Bridge Registers (D31:F0) 13.4.11 ELCR2--Slave Controller Edge/Level Triggered Register Offset Address: 4D1h Default Value: 00h Attribute: Size: R/W 8 bits In edge mode, (bit[x] = 0), the interrupt is recognized by a low to high transition. In level mode (bit[x] = 1), the interrupt is recognized by a high level. The real time clock, IRQ8#, and the floating point error interrupt, IRQ13, cannot be programmed for level mode. Bit Description IRQ15 ECL--R/W. 7 0 = Edge 1 = Level IRQ14 ECL--R/W. 6 5 0 = Edge 1 = Level Reserved. Must be 0. IRQ12 ECL--R/W. 4 0 = Edge 1 = Level IRQ11 ECL--R/W. 3 0 = Edge 1 = Level IRQ10 ECL--R/W. 2 0 = Edge 1 = Level IRQ9 ECL--R/W. 510 1 0 = Edge 1 = Level 0 Reserved. Must be 0. Datasheet LPC Interface Bridge Registers (D31:F0) 13.5 Advanced Programmable Interrupt Controller (APIC) 13.5.1 APIC Register Map The APIC is accessed using an indirect addressing scheme. Two registers are visible by software for manipulation of most of the APIC registers. These registers are mapped into memory space. The address bits 19:12 of the address range are programmable through bits 7:0 of OIC register (Chipset Config Registers:Offset 31FEh) The registers are shown in Table 13-4. Table 13-4. APIC Direct Registers Address Mnemonic Register Name Size Type FEC_ _0000h IND Index 8 bits R/W FEC_ _0010h DAT Data 32 bits R/W FEC_ _0040h EOIR EOI 32 bits WO Table 13-5 lists the registers which can be accessed within the APIC using the Index Register. When accessing these registers, accesses must be done one DWord at a time. For example, software should never access byte 2 from the Data register before accessing bytes 0 and 1. The hardware will not attempt to recover from a bad programming model in this case. Table 13-5. APIC Indirect Registers 13.5.2 Index Mnemonic 00 ID 01 VER Register Name Size Type Identification 32 bits R/W Version 32 bits RO 02-0F -- -- RO 10-11 REDIR_TBL0 Reserved Redirection Table 0 64 bits R/W, RO 12-13 REDIR_TBL1 Redirection Table 1 64 bits R/W, RO ... ... ... ... 3E-3F REDIR_TBL23 64 bits R/W, RO 40-FF -- -- RO ... Redirection Table 23 Reserved IND--Index Register Memory Address FEC_ _0000h Default Value: 00h Attribute: Size: R/W 8 bits The Index Register will select which APIC indirect register to be manipulated by software. The selector values for the indirect registers are listed in Table 13-5. Software will program this register to select the desired APIC internal register . Bit 7:0 Datasheet Description APIC Index--R/W. This is an 8-bit pointer into the I/O APIC register table. 511 LPC Interface Bridge Registers (D31:F0) 13.5.3 DAT--Data Register Memory Address FEC_ _0000h Default Value: 00000000h Attribute: Size: R/W 32 bits This is a 32-bit register specifying the data to be read or written to the register pointed to by the Index register. This register can only be accessed in DWord quantities. 13.5.4 Bit Description 7:0 APIC Data--R/W. This is a 32-bit register for the data to be read or written to the APIC indirect register (Figure 13-5) pointed to by the Index register (Memory Address FEC0_0000h). EOIR--EOI Register Memory Address FEC_ _0000h Default Value: N/A Attribute: Size: R/W 32 bits The EOI register is present to provide a mechanism to maintain the level triggered semantics for level-triggered interrupts issued on the parallel bus. When a write is issued to this register, the I/O APIC will check the lower 8 bits written to this register, and compare it with the vector field for each entry in the I/O Redirection Table. When a match is found, the Remote_IRR bit (Index Offset 10h, bit 14) for that I/O Redirection Entry will be cleared. Note: If multiple I/O Redirection entries, for any reason, assign the same vector for more than one interrupt input, each of those entries will have the Remote_IRR bit reset to 0. The interrupt, which was prematurely reset, will not be lost because if its input remained active when the Remote_IRR bit was cleared, the interrupt will be reissued and serviced at a later time. Note that only bits 7:0 are actually used. Bits 31:8 are ignored by the PCH. Note: To provide for future expansion, the processor should always write a value of 0 to Bits 31:8. 512 Bit Description 31:8 Reserved. To provide for future expansion, the processor should always write a value of 0 to Bits 31:8. 7:0 Redirection Entry Clear--WO. When a write is issued to this register, the I/O APIC will check this field, and compare it with the vector field for each entry in the I/O Redirection Table. When a match is found, the Remote_IRR bit for that I/O Redirection Entry will be cleared. Datasheet LPC Interface Bridge Registers (D31:F0) 13.5.5 ID--Identification Register Index Offset: Default Value: 00h 00000000h Attribute: Size: R/W 32 bits The APIC ID serves as a physical name of the APIC. The APIC bus arbitration ID for the APIC is derived from its I/O APIC ID. This register is reset to 0 on power-up reset. Bit 31:28 Reserved 27:24 APIC ID--R/W. Software must program this value before using the APIC. 23:16 15 14:0 13.5.6 Description Reserved Scratchpad Bit. Reserved VER--Version Register Index Offset: Default Value: 01h 00170020h Attribute: Size: RO, RWO 32 bits Each I/O APIC contains a hardwired Version Register that identifies different implementation of APIC and their versions. The maximum redirection entry information also is in this register, to let software know how many interrupt are supported by this APIC. Bit Description 31:24 Reserved 23:16 Maximum Redirection Entries (MRE)--RWO. This is the entry number (0 being the lowest entry) of the highest entry in the redirection table. It is equal to the number of interrupt input pins minus one and is in the range 0 through 239. In the PCH this field is hardwired to 17h to indicate 24 interrupts. BIOS must write to this field after PLTRST# to lockdown the value. this allows BIOS to use some of the entries for its own purpose and thus advertising fewer IOxAPIC Redirection Entries to the OS. 15 14:8 7:0 Datasheet Pin Assertion Register Supported (PRQ)--RO. Indicate that the IOxAPIC does not implement the Pin Assertion Register. Reserved Version (VS)--RO. This is a version number that identifies the implementation version. 513 LPC Interface Bridge Registers (D31:F0) 13.5.7 REDIR_TBL--Redirection Table Index Offset: Default Value: 10h-11h (vector 0) through 3E-3Fh (vector 23) Bit 16 = 1. All other bits undefined Attribute:R/W, RO Size: 64 bits each, (accessed as two 32 bit quantities) The Redirection Table has a dedicated entry for each interrupt input pin. The information in the Redirection Table is used to translate the interrupt manifestation on the corresponding interrupt pin into an APIC message. The APIC will respond to an edge triggered interrupt as long as the interrupt is held until after the acknowledge cycle has begun. Once the interrupt is detected, a delivery status bit internally to the I/O APIC is set. The state machine will step ahead and wait for an acknowledgment from the APIC unit that the interrupt message was sent. Only then will the I/O APIC be able to recognize a new edge on that interrupt pin. That new edge will only result in a new invocation of the handler if its acceptance by the destination APIC causes the Interrupt Request Register bit to go from 0 to 1. (In other words, if the interrupt was not already pending at the destination.) Bit Description 63:56 Destination--R/W. If bit 11 of this entry is 0 (Physical), then bits 59:56 specifies an APIC ID. In this case, bits 63:59 should be programmed by software to 0. If bit 11 of this entry is 1 (Logical), then bits 63:56 specify the logical destination address of a set of processors. 55:48 Extended Destination ID (EDID)--RO. These bits are sent to a local APIC only when in Processor System Bus mode. They become bits 11:4 of the address. 47:17 Reserved Mask--R/W. 16 15 14 13 12 514 0 = Not masked: An edge or level on this interrupt pin results in the delivery of the interrupt to the destination. 1 = Masked: Interrupts are not delivered nor held pending. Setting this bit after the interrupt is accepted by a local APIC has no effect on that interrupt. This behavior is identical to the device withdrawing the interrupt before it is posted to the processor. It is software's responsibility to deal with the case where the mask bit is set after the interrupt message has been accepted by a local APIC unit but before the interrupt is dispensed to the processor. Trigger Mode--R/W. This field indicates the type of signal on the interrupt pin that triggers an interrupt. 0 = Edge triggered. 1 = Level triggered. Remote IRR--R/W. This bit is used for level triggered interrupts; its meaning is undefined for edge triggered interrupts. 0 = Reset when an EOI message is received from a local APIC. 1 = Set when Local APIC/s accept the level interrupt sent by the I/O APIC. Interrupt Input Pin Polarity--R/W. This bit specifies the polarity of each interrupt signal connected to the interrupt pins. 0 = Active high. 1 = Active low. Delivery Status--RO. This field contains the current status of the delivery of this interrupt. Writes to this bit have no effect. 0 = Idle. No activity for this interrupt. 1 = Pending. Interrupt has been injected, but delivery is not complete. Datasheet LPC Interface Bridge Registers (D31:F0) Bit Description Destination Mode--R/W. This field determines the interpretation of the Destination field. 11 10:8 7:0 0 = Physical. Destination APIC ID is identified by bits 59:56. 1 = Logical. Destinations are identified by matching bit 63:56 with the Logical Destination in the Destination Format Register and Logical Destination Register in each Local APIC. Delivery Mode--R/W. This field specifies how the APICs listed in the destination field should act upon reception of this signal. Certain Delivery Modes will only operate as intended when used in conjunction with a specific trigger mode. These encodings are listed in the note below: Vector--R/W. This field contains the interrupt vector for this interrupt. Values range between 10h and FEh. NOTE: Delivery Mode encoding: Datasheet 000 = Fixed. Deliver the signal on the INTR signal of all processor cores listed in the destination. Trigger Mode can be edge or level. 001 = Lowest Priority. Deliver the signal on the INTR signal of the processor core that is executing at the lowest priority among all the processors listed in the specified destination. Trigger Mode can be edge or level. 010 = SMI (System Management Interrupt). Requires the interrupt to be programmed as edge triggered. The vector information is ignored but must be programmed to all 0s for future compatibility: not supported 011 = Reserved 100 = NMI. Deliver the signal on the NMI signal of all processor cores listed in the destination. Vector information is ignored. NMI is treated as an edge triggered interrupt even if it is programmed as level triggered. For proper operation this redirection table entry must be programmed to edge triggered. The NMI delivery mode does not set the RIRR bit. If the redirection table is incorrectly set to level, the loop count will continue counting through the redirection table addresses. Once the count for the NMI pin is reached again, the interrupt will be sent again: not supported 101 = INIT. Deliver the signal to all processor cores listed in the destination by asserting the INIT signal. All addressed local APICs will assume their INIT state. INIT is always treated as an edge triggered interrupt even if programmed as level triggered. For proper operation this redirection table entry must be programmed to edge triggered. The INIT delivery mode does not set the RIRR bit. If the redirection table is incorrectly set to level, the loop count will continue counting through the redirection table addresses. Once the count for the INIT pin is reached again, the interrupt will be sent again: not supported 110 = Reserved 111 = ExtINT. Deliver the signal to the INTR signal of all processor cores listed in the destination as an interrupt that originated in an externally connected 8259A compatible interrupt controller. The INTA cycle that corresponds to this ExtINT delivery will be routed to the external controller that is expected to supply the vector. Requires the interrupt to be programmed as edge triggered. 515 LPC Interface Bridge Registers (D31:F0) 13.6 Real Time Clock Registers 13.6.1 I/O Register Address Map The RTC internal registers and RAM are organized as two banks of 128 bytes each, called the standard and extended banks. The first 14 bytes of the standard bank contain the RTC time and date information along with four registers, A-D, that are used for configuration of the RTC. The extended bank contains a full 128 bytes of battery backed SRAM, and will be accessible even when the RTC module is disabled (using the RTC configuration register). Registers A-D do not physically exist in the RAM. All data movement between the host processor and the real-time clock is done through registers mapped to the standard I/O space. The register map appears in Table 13-6. Table 13-6. RTC I/O Registers I/O Locations If U128E bit = 0 70h and 74h Also alias to 72h and 76h 71h and 75h Also alias to 73h and 77h Function Real-Time Clock (Standard RAM) Index Register Real-Time Clock (Standard RAM) Target Register 72h and 76h Extended RAM Index Register (if enabled) 73h and 77h Extended RAM Target Register (if enabled) NOTES: 1. I/O locations 70h and 71h are the standard legacy location for the real-time clock. The map for this bank is shown in Table 13-7. Locations 72h and 73h are for accessing the extended RAM. The extended RAM bank is also accessed using an indexed scheme. I/O address 72h is used as the address pointer and I/O address 73h is used as the data register. Index addresses above 127h are not valid. If the extended RAM is not needed, it may be disabled. 2. Software must preserve the value of bit 7 at I/O addresses 70h and 74h. When writing to this address, software must first read the value, and then write the same value for bit 7 during the sequential address write. Note that port 70h is not directly readable. The only way to read this register is through Alt Access mode. Although RTC Index bits 6:0 are readable from port 74h, bit 7 will always return 0. If the NMI# enable is not changed during normal operation, software can alternatively read this bit once and then retain the value for all subsequent writes to port 70h. 516 Datasheet LPC Interface Bridge Registers (D31:F0) 13.6.2 Indexed Registers The RTC contains two sets of indexed registers that are accessed using the two separate Index and Target registers (70/71h or 72/73h), as shown in Table 13-7. Table 13-7. RTC (Standard) RAM Bank Index 00h Seconds 01h Seconds Alarm 02h Minutes 03h Minutes Alarm 04h Hours 05h Hours Alarm 06h Day of Week 07h Day of Month 08h Month 09h Year 0Ah Register A 0Bh Register B 0Ch Register C 0Dh Register D 0Eh-7Fh Datasheet Name 114 Bytes of User RAM 517 LPC Interface Bridge Registers (D31:F0) 13.6.2.1 RTC_REGA--Register A RTC Index: Default Value: Lockable: 0A Undefined No Attribute: Size: Power Well: R/W 8-bit RTC This register is used for general configuration of the RTC functions. None of the bits are affected by RSMRST# or any other PCH reset signal. Bit Description Update In Progress (UIP)--R/W. This bit may be monitored as a status flag. 7 0 = The update cycle will not start for at least 488 s. The time, calendar, and alarm information in RAM is always available when the UIP bit is 0. 1 = The update is soon to occur or is in progress. Division Chain Select (DV[2:0])--R/W. These three bits control the divider chain for the oscillator, and are not affected by RSMRST# or any other reset signal. 010 = Normal Operation 11X = Divider Reset 6:4 101 = Bypass 15 stages (test mode only) 100 = Bypass 10 stages (test mode only) 011 = Bypass 5 stages (test mode only) 001 = Invalid 000 = Invalid Rate Select (RS[3:0])--R/W. Selects one of 13 taps of the 15 stage divider chain. The selected tap can generate a periodic interrupt if the PIE bit is set in Register B. Otherwise this tap will set the PF flag of Register C. If the periodic interrupt is not to be used, these bits should all be set to 0. RS3 corresponds to bit 3. 0000 = Interrupt never toggles 0001 = 3.90625 ms 0010 = 7.8125 ms 0011 = 122.070 s 0100 = 244.141 s 3:0 0101 = 488.281 s 0110 = 976.5625 s 0111 = 1.953125 ms 1000 = 3.90625 ms 1001 = 7.8125 ms 1010 = 15.625 ms 1011 = 31.25 ms 1100 = 62.5 ms 1101 = 125 ms 1110 = 250 ms 1111= 500 ms 518 Datasheet LPC Interface Bridge Registers (D31:F0) 13.6.2.2 RTC_REGB--Register B (General Configuration) RTC Index: Default Value: Lockable: 0Bh Attribute: U0U00UUU (U: Undefined) Size: No Power Well: Bit R/W 8-bit RTC Description Update Cycle Inhibit (SET)--R/W. Enables/Inhibits the update cycles. This bit is not affected by RSMRST# nor any other reset signal. 7 0 = Update cycle occurs normally once each second. 1 = A current update cycle will abort and subsequent update cycles will not occur until SET is returned to 0. When set is one, the BIOS may initialize time and calendar bytes safely. NOTE: This bit should be set then cleared early in BIOS POST after each powerup directly after coin-cell battery insertion. Periodic Interrupt Enable (PIE)--R/W. This bit is cleared by RSMRST#, but not on any other reset. 6 0 = Disable. 1 = Enable. Allows an interrupt to occur with a time base set with the RS bits of register A. Alarm Interrupt Enable (AIE)--R/W. This bit is cleared by RTCRST#, but not on any other reset. 5 4 3 2 0 = Disable. 1 = Enable. Allows an interrupt to occur when the AF is set by an alarm match from the update cycle. An alarm can occur once a second, one an hour, once a day, or one a month. Update-Ended Interrupt Enable (UIE)--R/W. This bit is cleared by RSMRST#, but not on any other reset. 0 = Disable. 1 = Enable. Allows an interrupt to occur when the update cycle ends. Square Wave Enable (SQWE)--R/W. This bit serves no function in the PCH. It is left in this register bank to provide compatibility with the Motorola 146818B. The PCH has no SQW pin. This bit is cleared by RSMRST#, but not on any other reset. Data Mode (DM)--R/W. This bit specifies either binary or BCD data representation. This bit is not affected by RSMRST# nor any other reset signal. 0 = BCD 1 = Binary Hour Format (HOURFORM)--R/W. This bit indicates the hour byte format. This bit is not affected by RSMRST# nor any other reset signal. 1 0 Datasheet 0 = Twelve-hour mode. In twelve-hour mode, the seventh bit represents AM as 0 and PM as one. 1 = Twenty-four hour mode. Daylight Savings Legacy Software Support (DSLSWS)--R/W. Daylight savings functionality is no longer supported. This bit is used to maintain legacy software support and has no associated functionality. If BUC.DSO bit is set, the DSLSWS bit continues to be R/W. 519 LPC Interface Bridge Registers (D31:F0) 13.6.2.3 RTC_REGC--Register C (Flag Register) RTC Index: Default Value: Lockable: 0Ch Attribute: 00U00000 (U: Undefined) Size: No Power Well: RO 8-bit RTC Writes to Register C have no effect. Bit Description 7 Interrupt Request Flag (IRQF)--RO. IRQF = (PF * PIE) + (AF * AIE) + (UF *UFE). This bit also causes the RTC Interrupt to be asserted. This bit is cleared upon RSMRST# or a read of Register C. Periodic Interrupt Flag (PF)--RO. This bit is cleared upon RSMRST# or a read of Register C. 6 0 = If no taps are specified using the RS bits in Register A, this flag will not be set. 1 = Periodic interrupt Flag will be 1 when the tap specified by the RS bits of register A is 1. 5 0 = This bit is cleared upon RTCRST# or a read of Register C. 1 = Alarm Flag will be set after all Alarm values match the current time. Alarm Flag (AF)--RO. Update-Ended Flag (UF)--RO. 4 3:0 13.6.2.4 0 = The bit is cleared upon RSMRST# or a read of Register C. 1 = Set immediately following an update cycle for each second. Reserved. Will always report 0. RTC_REGD--Register D (Flag Register) RTC Index: Default Value: Lockable: 0Dh Attribute: 10UUUUUU (U: Undefined) Size: No Power Well: R/W 8-bit RTC Bit Description 7 0 = This bit should always be written as a 0 for write cycle, however it will return a 1 for read cycles. 1 = This bit is hardwired to 1 in the RTC power well. 6 Reserved. This bit always returns a 0 and should be set to 0 for write cycles. Valid RAM and Time Bit (VRT)--R/W. 5:0 520 Date Alarm--R/W. These bits store the date of month alarm value. If set to 000000b, then a don't care state is assumed. The host must configure the date alarm for these bits to do anything, yet they can be written at any time. If the date alarm is not enabled, these bits will return 0s to mimic the functionality of the Motorola 146818B. These bits are not affected by any reset assertion. Datasheet LPC Interface Bridge Registers (D31:F0) 13.7 Processor Interface Registers Table 13-8 is the register address map for the processor interface registers. Table 13-8. Processor Interface PCI Register Address Map 13.7.1 Offset Mnemonic Register Name Default Type 61h NMI_SC NMI Status and Control 00h R/W, RO 70h NMI_EN NMI Enable 80h R/W (special) 92h PORT92 Fast A20 and Init 00h R/W F0h COPROC_ERR Coprocessor Error 00h WO CF9h RST_CNT Reset Control 00h R/W NMI_SC--NMI Status and Control Register I/O Address: Default Value: Lockable: 61h 00h No Attribute: Size: Power Well: R/W, RO 8-bit Core Bit Description 7 SERR# NMI Source Status (SERR#_NMI_STS)--RO. 1 = Bit is set if a PCI agent detected a system error and pulses the PCI SERR# line and if bit 2 (PCI_SERR_EN) is cleared. This interrupt source is enabled by setting bit 2 to 0. To reset the interrupt, set bit 2 to 1 and then set it to 0. When writing to port 61h, this bit must be 0. NOTE: This bit is set by any of the PCH internal sources of SERR; this includes SERR assertions forwarded from the secondary PCI bus, errors on a PCI Express* port, or other internal functions that generate SERR#. 6 IOCHK# NMI Source Status (IOCHK_NMI_STS)--RO. 1 = Bit is set if an LPC agent (using SERIRQ) asserted IOCHK# and if bit 3 (IOCHK_NMI_EN) is cleared. This interrupt source is enabled by setting bit 3 to 0. To reset the interrupt, set bit 3 to 1 and then set it to 0. When writing to port 61h, this bit must be a 0. 5 Timer Counter 2 OUT Status (TMR2_OUT_STS)--RO. This bit reflects the current state of the 8254 counter 2 output. Counter 2 must be programmed following any PCI reset for this bit to have a determinate value. When writing to port 61h, this bit must be a 0. 4 Refresh Cycle Toggle (REF_TOGGLE)--RO. This signal toggles from either 0 to 1 or 1 to 0 at a rate that is equivalent to when refresh cycles would occur. When writing to port 61h, this bit must be a 0. IOCHK# NMI Enable (IOCHK_NMI_EN)--R/W. 3 0 = Enabled. 1 = Disabled and cleared. PCI SERR# Enable (PCI_SERR_EN)--R/W. 2 0 = SERR# NMIs are enabled. 1 = SERR# NMIs are disabled and cleared. Speaker Data Enable (SPKR_DAT_EN)--R/W. 1 0 = SPKR output is a 0. 1 = SPKR output is equivalent to the Counter 2 OUT signal value. Timer Counter 2 Enable (TIM_CNT2_EN)--R/W. 0 Datasheet 0 = Disable 1 = Enable 521 LPC Interface Bridge Registers (D31:F0) 13.7.2 NMI_EN--NMI Enable (and Real Time Clock Index) Register I/O Address: Default Value: Lockable: Note: 70h 80h No Attribute: Size: Power Well: R/W (special) 8-bit Core The RTC Index field is write-only for normal operation. This field can only be read in AltAccess Mode. Note, however, that this register is aliased to Port 74h (documented in Table 13-6), and all bits are readable at that address. Bits Description NMI Enable (NMI_EN)--R/W (special). 7 6:0 13.7.3 0 = Enable NMI sources. 1 = Disable All NMI sources. Real Time Clock Index Address (RTC_INDX)--R/W (special). This data goes to the RTC to select which register or CMOS RAM address is being accessed. PORT92--Fast A20 and Init Register I/O Address: Default Value: Lockable: 92h 00h No Bit 7:2 1 0 13.7.4 R/W 8-bit Core Description Reserved Alternate A20 Gate (ALT_A20_GATE)--R/W. This bit is Or'd with the A20GATE input signal to generate A20M# to the processor. 0 = A20M# signal can potentially go active. 1 = This bit is set when INIT# goes active. INIT_NOW--R/W. When this bit transitions from a 0 to a 1, the PCH will force INIT# active for 16 PCI clocks. COPROC_ERR--Coprocessor Error Register I/O Address: Default Value: Lockable: Bits 7:0 522 Attribute: Size: Power Well: F0h 00h No Attribute: Size: Power Well: WO 8-bits Core Description Coprocessor Error (COPROC_ERR)--WO. Any value written to this register will cause IGNNE# to go active, if FERR# had generated an internal IRQ13. For FERR# to generate an internal IRQ13, the CEN bit must be 1. Datasheet LPC Interface Bridge Registers (D31:F0) 13.7.5 RST_CNT--Reset Control Register I/O Address: Default Value: Lockable: Bit 7:4 CF9h 00h No Attribute: Size: Power Well: R/W 8-bit Core Description Reserved Full Reset (FULL_RST)--R/W. This bit is used to determine the states of SLP_S3#, SLP_S4#, and SLP_S5# after a CF9 hard reset (SYS_RST =1 and RST_CPU is set to 1), after PWROK going low (with RSMRST# high), or after two TCO timeouts. 3 0 = PCH will keep SLP_S3#, SLP_S4# and SLP_S5# high. 1 = PCH will drive SLP_S3#, SLP_S4# and SLP_S5# low for 3-5 seconds. NOTE: When this bit is set, it also causes the full power cycle (SLP_S3/4/5# assertion) in response to SYS_RESET#, PWROK#, and Watchdog timer reset sources. 2 Reset CPU (RST_CPU)--R/W. When this bit transitions from a 0 to a 1, it initiates a hard or soft reset, as determined by the SYS_RST bit (bit 1 of this register). System Reset (SYS_RST)--R/W. This bit is used to determine a hard or soft reset to the processor. 1 0 Datasheet 0 = When RST_CPU bit goes from 0 to 1, the PCH performs a soft reset by activating INIT# for 16 PCI clocks. 1 = When RST_CPU bit goes from 0 to 1, the PCH performs a hard reset by activating PLTRST# and SUS_STAT# active for a minimum of about 1 milliseconds. In this case, SLP_S3#, SLP_S4# and SLP_S5# state (assertion or de-assertion) depends on FULL_RST bit setting. The PCH main power well is reset when this bit is 1. It also resets the resume well bits (except for those noted throughout the EDS). Reserved 523 LPC Interface Bridge Registers (D31:F0) 13.8 Power Management Registers (PM--D31:F0) The power management registers are distributed within the PCI Device 31: Function 0 space, as well as a separate I/O range. Each register is described below. Unless otherwise indicate, bits are in the main (core) power well. Bits not explicitly defined in each register are assumed to be reserved. When writing to a reserved bit, the value should always be 0. Software should not attempt to use the value read from a reserved bit, as it may not be consistently 1 or 0. 13.8.1 Power Management PCI Configuration Registers (PM--D31:F0) Table 13-9 shows a small part of the configuration space for PCI Device 31: Function 0. It includes only those registers dedicated for power management. Some of the registers are only used for Legacy Power management schemes. Table 13-9. Power Management PCI Register Address Map (PM--D31:F0) 13.8.1.1 Offset Mnemonic A0h GEN_PMCON_1 A2h Default Type General Power Management Configuration 1 0000h R/W, R/WO, RO GEN_PMCON_2 General Power Management Configuration 2 00h R/W, R/WC, RO A4h GEN_PMCON_3 General Power Management Configuration 3 00h R/W, R/WC A6h GEN_PMCON_LO CK General Power Management Configuration Lock 00h RO, R/WLO A9h CIR4 ABh BM_BREAK_EN ACh PMIR B8-BBh GPI_ROUT Register Name Chipset Initialization Register 4 01h R/W BM_BREAK_EN 00h R/W Power Management Initialization 00000000h R/W, R/WL GPI Route Control 00000000h R/W GEN_PMCON_1--General PM Configuration 1 Register (PM--D31:F0) Offset Address: A0h Default Value: 0000h Lockable: No Bit 15:11 Attribute: Size: Usage: Power Well: R/W, RO, R/WO 16-bit ACPI, Legacy Core Description Reserved BIOS_PCI_EXP_EN--R/W. This bit acts as a global enable for the SCI associated with the PCI Express* ports. 10 0 = The various PCI Express ports and Processor cannot cause the PCI_EXP_STS bit to go active. 1 = The various PCI Express ports and Processor can cause the PCI_EXP_STS bit to go active. PWRBTN_LVL--RO. This bit indicates the current state of the PWRBTN# signal. 9 524 0 = Low. 1 = High. Datasheet LPC Interface Bridge Registers (D31:F0) Bit Description 8:5 Reserved SMI_LOCK--R/WO. When this bit is set, writes to the GLB_SMI_EN bit (PMBASE + 30h, bit 0) will have no effect. Once the SMI_LOCK bit is set, writes of 0 to SMI_LOCK bit will have no effect (that is, once set, this bit can only be cleared by PLTRST#). 4 3 (Mobile Only) Reserved Pseudo CLKRUN_EN(PSEUDO_CLKRUN_EN)--R/W. 3 (Desktop Only) 0 = Disable. 1 = Enable internal CLKRUN# logic to allow DMI PLL shutdown. This bit has no impact on state of external CLKRUN# pin. NOTES: 1. PSEUDO_CLKRUN_EN bit does not result in STP_PCI# assertion to actually stop the external PCICLK. 2. This bit should be set mutually exclusive with the CLKRUN_EN bit. Setting PSEUDO_CLKRUN_EN in a mobile sku could result in unspecified behavior. PCI CLKRUN# Enable (CLKRUN_EN)--R/W. 0 = Disable. PCH drives the CLKRUN# signal low. 1 = Enable CLKRUN# logic to control the system PCI clock using the CLKRUN# and STP_PCI# signals. 2 (Mobile Only) 2 (Desktop Only) NOTES: 1. When the SLP_EN# bit is set, the PCH drives the CLKRUN# signal low regardless of the state of the CLKRUN_EN bit. This ensures that the PCI and LPC clocks continue running during a transition to a sleep state. 2. This bit should be set mutually exclusive with the PSEUDO_CLKRUN_EN bit. Setting CLKRUN_EN in a non-mobile sku could result in unspecified behavior. Reserved Periodic SMI# Rate Select (PER_SMI_SEL)--R/W. Set by software to control the rate at which periodic SMI# is generated. 1:0 13.8.1.2 00 01 10 11 = = = = 64 seconds 32 seconds 16 seconds 8 seconds GEN_PMCON_2--General PM Configuration 2 Register (PM--D31:F0) Offset Address: A2h Default Value: 00h Lockable: No Bit 7 Attribute: Size: Usage: Power Well: R/W, RO, R/WC 8-bit ACPI, Legacy Resume Description DRAM Initialization Bit--R/W. This bit does not effect hardware functionality in any way. BIOS is expected to set this bit prior to starting the DRAM initialization sequence and to clear this bit after completing the DRAM initialization sequence. BIOS can detect that a DRAM initialization sequence was interrupted by a reset by reading this bit during the boot sequence. * If the bit is 1, then the DRAM initialization was interrupted. * This bit is reset by the assertion of the RSMRST# pin. Datasheet 525 LPC Interface Bridge Registers (D31:F0) Bit 6 Description Reserved Memory Placed in Self-Refresh (MEM_SR)--RO. 5 * If the bit is 1, DRAM should have remained powered and held in Self-Refresh through the last power state transition (that is, the last time the system left S0). * This bit is reset by the assertion of the RSMRST# pin. System Reset Status (SRS)--R/WC. Software clears this bit by writing a 1 to it. 0 = SYS_RESET# button Not pressed. 1 = PCH sets this bit when the SYS_RESET# button is pressed. BIOS is expected to read this bit and clear it, if it is set. 4 NOTES: 1. This bit is also reset by RSMRST# and CF9h resets. 2. The SYS_RESET# is implemented in the Main power well. This pin must be properly isolated and masked to prevent incorrectly setting this Suspend well status bit. CPU Thermal Trip Status (CTS)--R/WC. 0 = Software clears this bit by writing a 1 to it. 1 = This bit is set when PLTRST# is inactive and THRMTRIP# goes active while the system is in an S0 or S1 state. 3 NOTES: 1. This bit is also reset by RSMRST#, and CF9h resets. It is not reset by the shutdown and reboot associated with the CPUTHRMTRIP# event. 2. The CF9h reset in the description refers to CF9h type core well reset which includes SYS_RST#, PWROK/SYS_PWROK low, SMBus hard reset, TCO Timeout. This type of reset will clear CTS bit. Minimum SLP_S4# Assertion Width Violation Status--R/WC. 2 0 = Software clears this bit by writing a 1 to it. 1 = Hardware sets this bit when the SLP_S4# assertion width is less than the time programmed in the SLP_S4# Minimum Assertion Width field (D31:F0:Offset A4h:bits 5:4). The PCH begins the timer when SLP_S4# is asserted during S4/S5 entry, or when the RSMRST# input is de-asserted during G3 exit. Note that this bit is functional regardless of the value in the SLP_S4# Assertion Stretch Enable (D31:F0:Offset A4h:bit 3). NOTE: This bit is reset by the assertion of the RSMRST# pin, but can be set in some cases before the default value is readable. 1 Reserved PWROK Failure (PWROK_FLR)--R/WC. 0 526 0 = Software clears this bit by writing a 1 to it, or when the system goes into a G3 state. 1 = This bit will be set any time PWROK goes low, when the system was in S0, or S1 state. NOTE: See Chapter 5.13.10.3 for more details about the PWROK pin functionality. Datasheet LPC Interface Bridge Registers (D31:F0) 13.8.1.3 GEN_PMCON_3--General PM Configuration 3 Register (PM--D31:F0) Offset Address: A4h Default Value: 00h Lockable: No Attribute: Size: Usage: Power Well: Bit R/W, R/WC 16-bit ACPI, Legacy RTC, SUS Description PME B0 S5 Disable (PME_B0_S5_DIS)--R/W. When set to 1, this bit blocks wake events from PME_B0_STS in S5, regardless of the state of PME_B0_EN. When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. Wakes from power states other than S5 are not affected by this policy bit. The net effect of setting PME_B0_S5_DIS = '1' is described by the truth table below: Y = Wake; N = Don't wake; B0 = PME_B0_EN; OV = WOL Enable Override 15 B0/OV S1/S3/S4 S5 00 N N 01 N Y (LAN only) 11 Y (all PME B0 sources) Y (LAN only) 10 Y (all PME B0 sources) N This bit is cleared by the RTCRST# pin. 14 Reserved WOL Enable Override--R/W. 13 0 = WOL policies are determined by PMEB0 enable bit and appropriate LAN status bits 1 = Enable integrated LAN to wake the system in S5 only regardless of the value in the PME_B0_EN bit in the GPE0_EN register. This bit is cleared by the RTCRST# pin. Disable SLP_S4# Stretching after G3: R/W 12 0 = Enables stretching on SLP_S4# in conjunction with SLP_S4# Assertion Stretch Enable (bit 3) and the Minimum Assertion Width (bits 5:4) 1 = Disables stretching on SLP_S4# regardless of the state of the SLP_S4# Assertion Stretch Enable (bit 3). This bit is cleared by the RTCRST# pin. NOTE: This field is RO when the SLP_Sx# Stretching Policy Lock- Down bit is set. SLP_S3# Minimum Assertion Width: R/W This 2-bit value indicates the minimum assertion width of the SLP_S3# signal to ensure that the Main power supplies have been fully power-cycled. Valid Settings are: 11:10 00 = 60-100 us 01 = 1-1.2 ms 10 = 50-50.2 ms 11 = 2-2.0002 s This bit is cleared by the RSMRST# pin. NOTE: This field is RO when the SLP_Sx# Stretching Policy Lock-Down bit is set. Datasheet 527 LPC Interface Bridge Registers (D31:F0) Bit 9 Description General Reset Status (GEN_RST_STS)--R/WC. This bit is set by hardware whenever PLTRST# asserts for any reason other than going into a softwareentered sleep state (using PM1CNT.SLP_EN write) or a suspend well power failure (RSMRST# pin assertion). BIOS is expected to consult and then write a 1 to clear this bit during the boot flow before determining what action to take based on PM1_STS.WAK_STS = 1. If GEN_RST_STS = 1, the cold reset boot path should be followed rather than the resume path, regardless of the setting of WAK_STS. This bit is cleared by the RSMRST# pin. 8 SLP_LAN# Default Value (SLP_LAN_DEFAULT)--R/W. This bit specifies the value to drive on the SLP_LAN# pin when in Sx/Moff and ME FW nor host BIOS has configured SLP_LAN#/GPIO29 as an output. When this bit is set to 1 SLP_LAN# will default to be driven high, when set to 0 SLP_LAN# will default to be driven low. This bit will always determine SLP_LAN# behavior when in S4/S5/Moff after a G3, in S5/Moff after a host partition reset with power down and when in S5/Moff due to an unconditional power down. This bit is cleared by RTCRST#. SWSMI_RATE_SEL--R/W. This field indicates when the SWSMI timer will time out. Valid values are: 7:6 00 = 1.5 ms 0.6 ms 01 = 16 ms 4 ms 10 = 32 ms 4 ms 11 = 64 ms 4 ms These bits are not cleared by any type of reset except RTCRST#. SLP_S4# Minimum Assertion Width--R/W. This field indicates the minimum assertion width of the SLP_S4# signal to ensure that the DRAMs have been safely power-cycled. Valid values are: 5:4 11 10 01 00 = = = = 1 2 3 4 second seconds seconds seconds This value is used in two ways: 1. If the SLP_S4# assertion width is ever shorter than this time, a status bit is set for BIOS to read when S0 is entered. 2. If enabled by bit 3 in this register, the hardware will prevent the SLP_S4# signal from de-asserting within this minimum time period after asserting. RTCRST# forces this field to the conservative default state (00b). NOTE: This field is RO when the SLP_S4# Stretching Policy Lock-Down bit is set. SLP_S4# Assertion Stretch Enable--R/W. 3 0 = The SLP_S4# minimum assertion time is 1 to 2 RTCCLK. 1 = The SLP_S4# signal minimally assert for the time specified in bits 5:4 of this register. This bit is cleared by RTCRST#. NOTE: This bit is RO when the SLP_S4# Stretching Policy Lock-Down bit is set. 2 528 RTC Power Status (RTC_PWR_STS)--R/W. This bit is set when RTCRST# indicates a weak or missing battery. The bit is not cleared by any type of reset. The bit will remain set until the software clears it by writing a 0 back to this bit position. Datasheet LPC Interface Bridge Registers (D31:F0) Bit Description Power Failure (PWR_FLR)--R/WC. This bit is in the RTC well, and is not cleared by any type of reset except RTCRST#. 1 0 = Indicates that the trickle current has not failed since the last time the bit was cleared. Software clears this bit by writing a 1 to it. 1 = Indicates that the trickle current (from the main battery or trickle supply) was removed or failed. NOTE: Clearing CMOS in a PCH-based platform can be done by using a jumper on RTCRST# or GPI, or using SAFEMODE strap. Implementations should not attempt to clear CMOS by using a jumper to pull VccRTC low. AFTERG3_EN--R/W. This bit determines what state to go to when power is reapplied after a power failure (G3 state). This bit is in the RTC well and is only cleared by RTCRST# assertion. 0 0 = System will return to S0 state (boot) after power is re-applied. 1 = System will return to the S5 state (except if it was in S4, in which case it will return to S4). In the S5 state, the only enabled wake event is the Power Button or any enabled wake event that was preserved through the power failure. NOTE: RSMRST# is sampled using the RTC clock. Therefore, low times that are less than one RTC clock period may not be detected by the PCH. 13.8.1.4 GEN_PMCON_LOCK--General Power Management Configuration Lock Register Offset Address: Default Value: Lockable: Power Well: A6h 00h No Core Bit 7:3 2 Attribute: Size: Usage: RO, R/WLO 8-bit ACPI Description Reserved SLP_S4# Stretching Policy Lock-Down--R/WLO. When set to 1, this bit locks down the SLP_S4# Minimum Assertion Width, the SLP_S4# Assertion Stretch Enable, the Disable SLP_S4# Stretching after G3 and SLP_S4# Assertion Stretch Enable bits in the GEN_PMCON_3 register, making them read-only. This bit becomes locked when a value of 1b is written to it. Writes of 0 to this bit are always ignored. This bit is cleared by platform reset. 1 0 ACPI_BASE_LOCK--R/WLO. When set to 1, this bit locks down the ACPI Base Address Register (ABASE) at offset 40h. The Base Address Field becomes readonly. This bit becomes locked when a value of 1b is written to it. Writes of 0 to this bit are always ignored. Once locked by writing 1, the only way to clear this bit is to perform a platform reset. Reserved C Datasheet 529 LPC Interface Bridge Registers (D31:F0) 13.8.1.5 Chipset Initialization Register 4 (PM--D31:F0) Offset Address: Default Value: Lockable: Power Well: A9h 01h No Core Bit 7:0 13.8.1.6 Attribute: Size: Usage: R/W 8-bit ACPI, Legacy Description CIR4 Field 1--R/W. BIOS must program this field to 45h. BM_BREAK_EN Register (PM--D31:F0) Offset Address: Default Value: Lockable: Power Well: ABh 00h No Core Bit Attribute: Size: Usage: R/W 8-bit ACPI, Legacy Description STORAGE_BREAK_EN--R/W. 7 0 = Serial ATA traffic will not act as a break event. 1 = Serial ATA traffic acts as a break event, Serial ATA master activity will cause BM_STS to be set and will cause a break from C3/C4. PCIE_BREAK_EN--R/W. 6 0 = PCI Express* traffic will not act as a break event. 1 = PCI Express traffic acts as a break event, PCI Express master activity will cause BM_STS to be set and will cause a break from C3/C4. PCI_BREAK_EN--R/W. 5 4:3 0 = PCI traffic will not act as a break event. 1 = PCI traffic acts as a break event, PCI master activity will cause BM_STS to be set and will cause a break from C3/C4. Reserved EHCI_BREAK_EN--R/W. 2 1 0 = EHCI traffic will not act as a break event. 1 = EHCI traffic acts as a break event, EHCI master activity will cause BM_STS to be set and will cause a break from C3/C4. Reserved HDA_BREAK_EN--R/W. 0 530 0 = Intel(R) High Definition Audio traffic will not act as a break event. 1 = Intel(R) High Definition Audio traffic acts as a break event, Intel(R) High Definition Audio master activity will cause BM_STS to be set and will cause a break from C3/ C4. Datasheet LPC Interface Bridge Registers (D31:F0) 13.8.1.7 PMIR--Power Management Initialization Register (PM--D31:F0) Offset Address: ACh Default Value: 00000000h Attribute: Size: R/W 32-bit 0 Bit 31:30 29:21 Description PMIR Field 1--R/W. BIOS must program these bits to 11b. Note: In the manufacturing/debug environments these bits will need to be left as default "00h". Reserved CF9h Global Reset (CF9GR)--R/W. 20 When set, a CF9h write of 6h or Eh will cause a Global reset of both the Host and Intel(R) ME partitions. If this bit is cleared, a CF9h write of 6h or Eh will only reset the host partition. This bit field is not reset by a CF9h reset. NOTE: Bit 20 is read only when bit 31 set to 1. 19:0 13.8.1.8 PMIR Field 0--R/W. BIOS must program these bits to 00300h. GPIO_ROUT--GPIO Routing Control Register (PM--D31:F0) Offset Address: B8h-BBh Default Value: 00000000h Lockable: No Bit 31:30 Attribute: Size: Power Well: R/W 32-bit Resume Description GPIO15 Route--R/W. See bits 1:0 for description. Same pattern for GPIO14 through GPIO3 5:4 GPIO2 Route--R/W. See bits 1:0 for description. 3:2 GPIO1 Route--R/W. See bits 1:0 for description. GPIO0 Route--R/W. GPIO can be routed to cause an NMI, SMI# or SCI when the GPIO[n]_STS bit is set. If the GPIO0 is not set to an input, this field has no effect. 1:0 If the system is in an S1-S5 state and if the GPE0_EN bit is also set, then the GPIO can cause a Wake event, even if the GPIO is NOT routed to cause an NMI, SMI# or SCI. 00 = No effect. 01 = SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) 10 = SCI (if corresponding GPE0_EN bit is also set) 11 = NMI (If corresponding GPI_NMI_EN is also set) Note: GPIOs that are not implemented will not have the corresponding bits implemented in this register. 13.8.2 APM I/O Decode Table 13-10 shows the I/O registers associated with APM support. This register space is enabled in the PCI Device 31: Function 0 space (APMDEC_EN), and cannot be moved (fixed I/O location). Table 13-10. APM Register Map Datasheet Address Mnemonic B2h APM_CNT B3h APM_STS Register Name Default Type Advanced Power Management Control Port 00h R/W Advanced Power Management Status Port 00h R/W 531 LPC Interface Bridge Registers (D31:F0) 13.8.2.1 APM_CNT--Advanced Power Management Control Port Register I/O Address: Default Value: Lockable: Power Well: B2h 00h No Core Attribute: Size: Usage: Bit 7:0 13.8.2.2 Description Used to pass an APM command between the OS and the SMI handler. Writes to this port not only store data in the APMC register, but also generates an SMI# when the APMC_EN bit is set. APM_STS--Advanced Power Management Status Port Register I/O Address: Default Value: Lockable: Power Well: B3h 00h No Core Attribute: Size: Usage: Bit 7:0 13.8.3 R/W 8-bit Legacy Only R/W 8-bit Legacy Only Description Used to pass data between the OS and the SMI handler. Basically, this is a scratchpad register and is not affected by any other register or function (other than a PCI reset). Power Management I/O Registers Table 13-11 shows the registers associated with ACPI and Legacy power management support. These registers are enabled in the PCI Device 31: Function 0 space (PM_IO_EN), and can be moved to any I/O location (128-byte aligned). The registers are defined to support the ACPI 3.0a specification, and use the same bit names. Note: All reserved bits and registers will always return 0 when read, and will have no effect when written. Table 13-11. ACPI and Legacy I/O Register Map (Sheet 1 of 2) PMBASE + Offset Mnemonic 00h-01h PM1_STS 02h-03h 532 Register Name ACPI Pointer Default Type PM1 Status PM1a_EVT_BLK 0000h R/WC PM1_EN PM1 Enable PM1a_EVT_BLK+ 2 0000h R/W PM1a_CNT_BLK 00000000h R/W, WO PMTMR_BLK xx000000h RO 04h-07h PM1_CNT PM1 Control 08h-0Bh PM1_TMR PM1 Timer 0Ch-1Fh -- Reserved -- -- -- GPE0_BLK 00000000h R/WC GPE0_BLK+8 00000000 00000000h R/W 20-27h GPE0_STS General Purpose Event 0 Status 28-2Fh GPE0_EN General Purpose Event 0 Enables 30h-33h SMI_EN SMI# Control and Enable 00000002h R/W, WO, R/WO SMI Status 34h-37h SMI_STS 00000000h R/WC, RO 38h-39h ALT_GP_SMI_EN Alternate GPI SMI Enable 0000h R/W 3Ah-3Bh ALT_GP_SMI_STS Alternate GPI SMI Status 0000h R/WC Datasheet LPC Interface Bridge Registers (D31:F0) Table 13-11. ACPI and Legacy I/O Register Map (Sheet 2 of 2) PMBASE + Offset Mnemonic Register Name 3Ch-3Dh UPRWC USB Per-Port Registers Write Control 3Eh-41h -- 42h Reserved GPE_CNTL 43h -- 44h-45h DEVACT_STS 46h-4Fh -- -- General Purpose Event Control Reserved -- Default Type 0000h R/WC, RO, R/WO -- -- 00h RO, R/W -- -- 0000h R/WC PM2a_CNT_BLK 00h R/W -- -- -- Device Activity Status Reserved 50h PM2_CNT 51h-5Fh -- Reserved 60h-7Fh -- Reserved for TCO 13.8.3.1 ACPI Pointer PM2 Control PM1_STS--Power Management 1 Status Register I/O Address: Default Value: Lockable: Power Well: PMBASE + 00h (ACPI PM1a_EVT_BLK) 0000h No Bits 0-7: Core, Bits 8-15: Resume, except Attribute: Size: Usage: R/WC 16-bit ACPI or Legacy Bit 11 in RTC If bit 10 or 8 in this register is set, and the corresponding _EN bit is set in the PM1_EN register, then the PCH will generate a Wake Event. Once back in an S0 state (or if already in an S0 state when the event occurs), the PCH will also generate an SCI if the SCI_EN bit is set, or an SMI# if the SCI_EN bit is not set. Note: Bit 5 does not cause an SMI# or a wake event. Bit 0 does not cause a wake event but can cause an SMI# or SCI. Bit Description Wake Status (WAK_STS)--R/WC. This bit is not affected by hard resets caused by a CF9 write, but is reset by RSMRST#. 0 = Software clears this bit by writing a 1 to it. 1 = Set by hardware when the system is in one of the sleep states (using the SLP_EN bit) and an enabled wake event occurs. Upon setting this bit, the PCH will transition the system to the ON state. 15 If the AFTERG3_EN bit is not set and a power failure (such as removed batteries) occurs without the SLP_EN bit set, the system will return to an S0 state when power returns, and the WAK_STS bit will not be set. If the AFTERG3_EN bit is set and a power failure occurs without the SLP_EN bit having been set, the system will go into an S5 state when power returns, and a subsequent wake event will cause the WAK_STS bit to be set. Note that any subsequent wake event would have to be caused by either a Power Button press, or an enabled wake event that was preserved through the power failure (enable bit in the RTC well). Datasheet 533 LPC Interface Bridge Registers (D31:F0) Bit Description PCI Express Wake Status (PCIEXPWAK_STS)--R/WC. 14 0 = Software clears this bit by writing a 1 to it. If the WAKE# pin is still active during the write or the PME message received indication has not been cleared in the root port, then the bit will remain active (that is, all inputs to this bit are levelsensitive). 1 = This bit is set by hardware to indicate that the system woke due to a PCI Express wakeup event. This wakeup event can be caused by the PCI Express WAKE# pin being active or receipt of a PCI Express PME message at a root port. This bit is set only when one of these events causes the system to transition from a non-S0 system power state to the S0 system power state. This bit is set independent of the state of the PCIEXP_WAKE_DIS bit. NOTE: This bit does not itself cause a wake event or prevent entry to a sleeping state. Thus, if the bit is 1 and the system is put into a sleeping state, the system will not automatically wake. 13:12 Reserved Power Button Override Status (PWRBTNOR_STS)--R/WC. 11 0 = Software clears this bit by writing a 1 to it. 1 = This bit is set any time a Power Button Override occurs (that is, the power button is pressed for at least 4 consecutive seconds), due to the corresponding bit in the SMBus slave message, Intel(R) ME Initiated Power Button Override, Intel(R) ME Initiated Host Reset with Power down or due to an internal thermal sensor catastrophic condition. The power button override causes an unconditional transition to the S5 state. The BIOS or SCI handler clears this bit by writing a 1 to it. This bit is not affected by hard resets using CF9h writes, and is not reset by RSMRST#. Thus, this bit is preserved through power failures. Note that if this bit is still asserted when the global SCI_EN is set then an SCI will be generated. RTC Status (RTC_STS)--R/WC. This bit is not affected by hard resets caused by a CF9 write, but is reset by RSMRST#. 10 9 0 = Software clears this bit by writing a 1 to it. 1 = Set by hardware when the RTC generates an alarm (assertion of the IRQ8# signal). Additionally if the RTC_EN bit (PMBASE + 02h, bit 10) is set, the setting of the RTC_STS bit will generate a wake event. ME_STS--R/WC. This bit is set when the Intel(R) Management Engine generates a NonMaskable wake event, and is not affected by any other enable bit. When this bit is set, the Host Power Management logic wakes to S0. This bit is only set by hardware and can only be reset by writing a one to this bit position. This bit is not affected by hard resets caused by a CF9 write, but is reset by RSMRST#. Power Button Status (PWRBTN__STS)--R/WC. This bit is not affected by hard resets caused by a CF9 write. 8 0 = If the PWRBTN# signal is held low for more than 4 seconds, the hardware clears the PWRBTN_STS bit, sets the PWRBTNOR_STS bit, and the system transitions to the S5 state with only PWRBTN# enabled as a wake event. This bit can be cleared by software by writing a one to the bit position. 1 = This bit is set by hardware when the PWRBTN# signal is asserted Low, independent of any other enable bit. In the S0 state, while PWRBTN_EN and PWRBTN_STS are both set, an SCI (or SMI# if SCI_EN is not set) will be generated. In any sleeping state S1-S5, while PWRBTN_EN (PMBASE + 02h, bit 8) and PWRBTN_STS are both set, a wake event is generated. NOTE: If the PWRBTN_STS bit is cleared by software while the PWRBTN# signal is sell asserted, this will not cause the PWRBN_STS bit to be set. The PWRBTN# signal must go inactive and active again to set the PWRBTN_STS bit. 534 Datasheet LPC Interface Bridge Registers (D31:F0) Bit 7:6 Description Reserved Global Status (GBL _STS)--R/WC. 5 0 = The SCI handler should then clear this bit by writing a 1 to the bit location. 1 = Set when an SCI is generated due to BIOS wanting the attention of the SCI handler. BIOS has a corresponding bit, BIOS_RLS, which will cause an SCI and set this bit. Bus Master Status (BM_STS)--R/WC. This bit will not cause a wake event, SCI or SMI#. 4 3:1 0 = Software clears this bit by writing a 1 to it. 1 = Set by the PCH when a PCH-visible bus master requests access to memory or the BM_BUSY# signal is active. Reserved Timer Overflow Status (TMROF_STS)--R/WC. 0 Datasheet 0 = The SCI or SMI# handler clears this bit by writing a 1 to the bit location. 1 = This bit gets set any time bit 22 of the 24-bit timer goes high (bits are numbered from 0 to 23). This will occur every 2.3435 seconds. When the TMROF_EN bit (PMBASE + 02h, bit 0) is set, then the setting of the TMROF_STS bit will additionally generate an SCI or SMI# (depending on the SCI_EN). 535 LPC Interface Bridge Registers (D31:F0) 13.8.3.2 PM1_EN--Power Management 1 Enable Register I/O Address: Default Value: Lockable: Power Well: PMBASE + 02h (ACPI PM1a_EVT_BLK + 2) Attribute: 0000h Size: No Usage: Bits 0-7: Core, Bits 8-9, 11-15: Resume, Bit 10: RTC Bit 15 R/W 16-bit ACPI or Legacy Description Reserved PCI Express* Wake Disable(PCIEXPWAK_DIS)--R/W. Modification of this bit has no impact on the value of the PCIEXP_WAKE_STS bit. 14 13:11 0 = Inputs to the PCIEXP_WAKE_STS bit in the PM1 Status register enabled to wake the system. 1 = Inputs to the PCIEXP_WAKE_STS bit in the PM1 Status register disabled from waking the system. Reserved RTC Event Enable (RTC_EN)--R/W. This bit is in the RTC well to allow an RTC event to wake after a power failure. This bit is not cleared by any reset other than RTCRST# or a Power Button Override event. 10 9 8 0 = No SCI (or SMI#) or wake event is generated then RTC_STS (PMBASE + 00h, bit 10) goes active. 1 = An SCI (or SMI#) or wake event will occur when this bit is set and the RTC_STS bit goes active. Reserved Power Button Enable (PWRBTN_EN)--R/W. This bit is used to enable the setting of the PWRBTN_STS bit to generate a power management event (SMI#, SCI). PWRBTN_EN has no effect on the PWRBTN_STS bit (PMBASE + 00h, bit 8) being set by the assertion of the power button. The Power Button is always enabled as a Wake event. 0 = Disable. 1 = Enable. 7:6 5 4:1 Reserved Global Enable (GBL_EN)--R/W. When both the GBL_EN and the GBL_STS bit (PMBASE + 00h, bit 5) are set, an SCI is raised. 0 = Disable. 1 = Enable SCI on GBL_STS going active. Reserved Timer Overflow Interrupt Enable (TMROF_EN)--R/W. Works in conjunction with the SCI_EN bit (PMBASE + 04h, bit 0) as described below: 0 536 0 X No SMI# or SCI 1 0 SMI# 1 1 SCI Datasheet LPC Interface Bridge Registers (D31:F0) 13.8.3.3 PM1_CNT--Power Management 1 Control Register I/O Address: Default Value: Lockable: Power Well: PMBASE + 04h (ACPI PM1a_CNT_BLK) 00000000h No Bits 0-7: Core, Bits 8-12: RTC, Bits 13-15: Resume Bit 31:14 13 Attribute: Size: Usage: R/W, WO 32-bit ACPI or Legacy Description Reserved Sleep Enable (SLP_EN)--WO. Setting this bit causes the system to sequence into the Sleep state defined by the SLP_TYP field. Sleep Type (SLP_TYP)--R/W. This 3-bit field defines the type of Sleep the system should enter when the SLP_EN bit is set to 1. These bits are only reset by RTCRST#. 12:10 9:3 000b ON: Typically maps to S0 state. 001b Puts CPU in S1 state. 010b Reserved 011b Reserved 100b Reserved 101b Suspend-To-RAM. Assert SLP_S3#: Typically maps to S3 state. 110b Suspend-To-Disk. Assert SLP_S3#, and SLP_S4#: Typically maps to S4 state. 111b Soft Off. Assert SLP_S3#, SLP_S4#, and SLP_S5#: Typically maps to S5 state. Reserved Global Release (GBL_RLS)--WO. 2 0 = This bit always reads as 0. 1 = ACPI software writes a 1 to this bit to raise an event to the BIOS. BIOS software has a corresponding enable and status bits to control its ability to receive ACPI events. Bus Master Reload (BM_RLD)--R/W. This bit is treated as a scratchpad bit. This bit is reset to 0 by PLTRST# 1 0 = Bus master requests will not cause a break from the C3 state. 1 = Enables Bus Master requests (internal or external) to cause a break from the C3 state. If software fails to set this bit before going to C3 state, the PCH will still return to a snoopable state from C3 or C4 states due to bus master activity. 0 SCI Enable (SCI_EN)--R/W. Selects the SCI interrupt or the SMI# interrupt for various events including the bits in the PM1_STS register (bit 10, 8, 0), and bits in GPE0_STS. 0 = These events will generate an SMI#. 1 = These events will generate an SCI. Datasheet 537 LPC Interface Bridge Registers (D31:F0) 13.8.3.4 PM1_TMR--Power Management 1 Timer Register I/O Address: PMBASE + 08h (ACPI PMTMR_BLK) Default Value: Lockable: Power Well: xx000000h No Core Bit 31:24 23:0 Attribute: Size: Usage: RO 32-bit ACPI Description Reserved Timer Value (TMR_VAL)--RO. Returns the running count of the PM timer. This counter runs off a 3.579545 MHz clock (14.31818 MHz divided by 4). It is reset to 0 during a PCI reset, and then continues counting as long as the system is in the S0 state. After an S1 state, the counter will not be reset (it will continue counting from the last value in S0 state. Anytime bit 22 of the timer goes HIGH to LOW (bits referenced from 0 to 23), the TMROF_STS bit (PMBASE + 00h, bit 0) is set. The High-to-Low transition will occur every 2.3435 seconds. If the TMROF_EN bit (PMBASE + 02h, bit 0) is set, an SCI interrupt is also generated. 13.8.3.5 PM1_TMR--Power Management 1 Timer Register I/O Address: PMBASE + 08h (ACPI PMTMR_BLK) Default Value: Lockable: Power Well: xx000000h No Core Bit 31:24 23:0 Attribute: Size: Usage: RO 32-bit ACPI Description Reserved Timer Value (TMR_VAL)--RO. Returns the running count of the PM timer. This counter runs off a 3.579545 MHz clock (14.31818 MHz divided by 4). It is reset to 0 during a PCI reset, and then continues counting as long as the system is in the S0 state. After an S1 state, the counter will not be reset (it will continue counting from the last value in S0 state. Anytime bit 22 of the timer goes HIGH to LOW (bits referenced from 0 to 23), the TMROF_STS bit (PMBASE + 00h, bit 0) is set. The High-to-Low transition will occur every 2.3435 seconds. If the TMROF_EN bit (PMBASE + 02h, bit 0) is set, an SCI interrupt is also generated. 538 Datasheet LPC Interface Bridge Registers (D31:F0) 13.8.3.6 GPE0_STS--General Purpose Event 0 Status Register I/O Address: PMBASE + 20h (ACPI GPE0_BLK) Default Value: Lockable: Power Well: 0000000000000000h No Resume Attribute: Size: Usage: Bits 0:32 R/WC Bits 33:63 RO 64-bit ACPI This register is symmetrical to the General Purpose Event 0 Enable Register. Unless indicated otherwise below, if the corresponding _EN bit is set, then when the _STS bit get set, the PCH will generate a Wake Event. Once back in an S0 state (or if already in an S0 state when the event occurs), the PCH will also generate an SCI if the SCI_EN bit is set, or an SMI# if the SCI_EN bit (PMBASE + 04h, bit 0) is not set. Bits 31:16 are reset by a CF9h write; bits 63:32 and 15:0 are not. All are reset by RSMRST#. Bit 63:36 Description Reserved GPIO27_STS--R/WC. 35 34:32 0 = Disable. 1 = Set by hardware and can be reset by writing a one to this bit position or a resume well reset. This bit is set at the level specified in GP27IO_POL. Note that GPIO27 is always monitored as an input for the purpose of setting this bit, regardless of the actual GPIO configuration., Reserved GPIOn_STS--R/WC. 0 = Software clears this bit by writing a 1 to it. 1 = These bits are set any time the corresponding GPIO is set up as an input and the corresponding GPIO signal is high (or low if the corresponding GP_INV bit is set). If the corresponding enable bit is set in the GPE0_EN register, then when the GPIO[n]_STS bit is set: 31:16 * If the system is in an S1-S5 state, the event will also wake the system. * If the system is in an S0 state (or upon waking back to an S0 state), a SCI will be caused depending on the GPIO_ROUT bits (D31:F0:B8h, bits 31:30) for the corresponding GPI. NOTE: Mapping is as follows: bit 31 corresponds to GPIO[15]... and bit 16 corresponds to GPIO[0]. 15:14 13 Reserved PME_B0_STS--R/WC. This bit will be set to 1 by the PCH when any internal device with PCI Power Management capabilities on bus 0 asserts the equivalent of the PME# signal. Additionally, if the PME_B0_EN bit is set, and the system is in an S0 state, then the setting of the PME_B0_STS bit will generate an SCI (or SMI# if SCI_EN is not set). If the PME_B0_STS bit is set, and the system is in an S1-S4 state (or S5 state due to SLP_TYP and SLP_EN), then the setting of the PME_B0_STS bit will generate a wake event, and an SCI (or SMI# if SCI_EN is not set) will be generated. If the system is in an S5 state due to power button override, then the PME_B0_STS bit will not cause a wake event or SCI. The default for this bit is 0. Writing a 1 to this bit position clears this bit. NOTE: HD audio wake events are reported in this bit. Intel(R) Management Engine "maskable" wake events are also reported in this bit. 12 Datasheet Reserved 539 LPC Interface Bridge Registers (D31:F0) Bit Description PME_STS--R/WC. 11 10 (Desktop Only) 10 (Mobile Only) 0 = Software clears this bit by writing a 1 to it. 1 = Set by hardware when the PME# signal goes active. Additionally, if the PME_EN bit is set, and the system is in an S0 state, then the setting of the PME_STS bit will generate an SCI or SMI# (if SCI_EN is not set). If the PME_EN bit is set, and the system is in an S1-S4 state (or S5 state due to setting SLP_TYP and SLP_EN), then the setting of the PME_STS bit will generate a wake event, and an SCI will be generated. If the system is in an S5 state due to power button override or a power failure, then PME_STS will not cause a wake event or SCI. Reserved BATLOW_STS--R/WC. (Mobile Only) Software clears this bit by writing a 1 to it. 0 = BATLOW# Not asserted 1 = Set by hardware when the BATLOW# signal is asserted. PCI_EXP_STS--R/WC. 0 = Software clears this bit by writing a 1 to it. 1 = Set by hardware to indicate that: * The PME event message was received on one or more of the PCI Express* ports * An Assert PMEGPE message received from the Processor using DMI 9 NOTES: 1. The PCI WAKE# pin has no impact on this bit. 2. If the PCI_EXP_STS bit went active due to an Assert PMEGPE message, then a Deassert PMEGPE message must be received prior to the software write for the bit to be cleared. 3. If the bit is not cleared and the corresponding PCI_EXP_EN bit is set, the level-triggered SCI will remain active. 4. A race condition exists where the PCI Express device sends another PME message because the PCI Express device was not serviced within the time when it must resend the message. This may result in a spurious interrupt, and this is comprehended and approved by the PCI Express* Specification, Revision 1.0a. The window for this race condition is approximately 95-105 milliseconds. RI_STS--R/WC. 8 0 = Software clears this bit by writing a 1 to it. 1 = Set by hardware when the RI# input signal goes active. SMBus Wake Status (SMB_WAK_STS)--R/WC. Software clears this bit by writing a 1 to it. 0 = Wake event Not caused by the PCH's SMBus logic. 1 = Set by hardware to indicate that the wake event was caused by the PCH's SMBus logic.This bit will be set by the WAKE/SMI# command type, even if the system is already awake. The SMI handler should then clear this bit. 7 540 NOTES: 1. The SMBus controller will independently cause an SMI# so this bit does not need to do so (unlike the other bits in this register). 2. This bit is set by the SMBus slave command 01h (Wake/SMI#) even when the system is in the S0 state. Therefore, to avoid an instant wake on subsequent transitions to sleep states, software must clear this bit after each reception of the Wake/SMI# command or just prior to entering the sleep state. 3. The SMBALERT_STS bit (D31:F3:I/O Offset 00h:Bit 5) should be cleared by software before the SMB_WAK_STS bit is cleared. Datasheet LPC Interface Bridge Registers (D31:F0) Bit Description TCOSCI_STS--R/WC. Software clears this bit by writing a 1 to it. 6 5:3 2 0 = TOC logic or thermal sensor logic did Not cause SCI. 1 = Set by hardware when the TCO logic or thermal sensor logic causes an SCI. Reserved SWGPE_STS--R/WC. The SWGPE_CTRL bit (bit 1 of GPE_CTRL reg) acts as a level input to this bit. HOT_PLUG_STS--R/WC. 1 0 13.8.3.7 0 = This bit is cleared by writing a 1 to this bit position. 1 = When a PCI Express* Hot-Plug event occurs. This will cause an SCI if the HOT_PLUG_EN bit is set in the GEP0_EN register. Reserved GPE0_EN--General Purpose Event 0 Enables Register I/O Address: Default Value: Lockable: Power Well: PMBASE + 28h (ACPI GPE0_BLK + 8) Attribute: 0000000000000000h Size: No Usage: Bits 0-7, 9, 12, 14-63 Resume, Bits 8, 10-11, 13 RTC R/W 64-bit ACPI This register is symmetrical to the General Purpose Event 0 Status Register. All the bits in this register should be cleared to 0 based on a Power Button Override or processor Thermal Trip event. The resume well bits are all cleared by RSMRST#. The RTC well bits are cleared by RTCRST#. Bit 63:36 Description Reserved GPIO27_EN--R/W. 35 0 = Disable. 1 = Enable the setting of the GPIO27_STS bit to generate a wake event/SCI/SMI#. 34:32 Reserved 31:16 GPIn_EN--R/W. These bits enable the corresponding GPI[n]_STS bits being set to cause a SCI, and/or wake event. These bits are cleared by RSMRST#. NOTE: Mapping is as follows: bit 31 corresponds to GPIO15... and bit 16 corresponds to GPIO0. 15 Reserved 14 Reserved PME_B0_EN--R/W. 13 0 = Disable 1 = Enables the setting of the PME_B0_STS bit to generate a wake event and/or an SCI or SMI#. PME_B0_STS can be a wake event from the S1-S4 states, or from S5 (if entered using SLP_TYP and SLP_EN) or power failure, but not Power Button Override. This bit defaults to 0. NOTE: It is only cleared by Software or RTCRST#. It is not cleared by CF9h writes. 12 Reserved PME_EN--R/W. 11 Datasheet 0 = Disable. 1 = Enables the setting of the PME_STS to generate a wake event and/or an SCI. PME# can be a wake event from the S1-S4 state or from S5 (if entered using SLP_EN, but not power button override). 541 LPC Interface Bridge Registers (D31:F0) Bit 10 (Desktop Only) Description Reserved BATLOW_EN--R/W. (Mobile Only) 10 (Mobile Only) 0 = Disable. 1 = Enables the BATLOW# signal to cause an SMI# or SCI (depending on the SCI_EN bit) when it goes low. This bit does not prevent the BATLOW# signal from inhibiting the wake event. PCI_EXP_EN--R/W. 9 8 7 0 = Disable SCI generation upon PCI_EXP_STS bit being set. 1 = Enables PCH to cause an SCI when PCI_EXP_STS bit is set. This is used to allow the PCI Express* ports, including the link to the Processor, to cause an SCI due to wake/PME events. RI_EN--R/W. The value of this bit will be maintained through a G3 state and is not affected by a hard reset caused by a CF9h write. 0 = Disable. 1 = Enables the setting of the RI_STS to generate a wake event. Reserved TCOSCI_EN--R/W. 6 5:3 2 0 = Disable. 1 = Enables the setting of the TCOSCI_STS to generate an SCI. Reserved SWGPE_EN--R/W. This bit allows software to control the assertion of SWGPE_STS bit. This bit This bit, when set to 1, enables the SW GPE function. If SWGPE_CTRL is written to a 1, hardware will set SWGPE_STS (acts as a level input) If SWGPE_STS, SWGPE_EN, and SCI_EN are all 1's, an SCI will be generated If SWGPE_STS = 1, SWGPE_EN = 1, SCI_EN = 0, and GBL_SMI_EN = 1 then an SMI# will be generated HOT_PLUG_EN--R/W. 1 0 542 0 = Disables SCI generation upon the HOT_PLUG_STS bit being set. 1 = Enables the PCH to cause an SCI when the HOT_PLUG_STS bit is set. This is used to allow the PCI Express ports to cause an SCI due to hot-plug events. Reserved Datasheet LPC Interface Bridge Registers (D31:F0) 13.8.3.8 SMI_EN--SMI Control and Enable Register I/O Address: Default Value: Lockable: Power Well: Note: PMBASE + 30h 00000002h No Core Attribute: Size: Usage: R/W, R/WO, WO 32 bit ACPI or Legacy This register is symmetrical to the SMI status register. Bit 31:28 27 Description Reserved GPIO_UNLOCK_SMI_EN--R/WO. Setting this bit will cause the Intel(R) PCH to generate an SMI# when the GPIO_UNLOCK_SMI_STS bit is set in the SMI_STS register. Once written to 1, this bit can only be cleared by PLTRST#. 26:19 Reserved INTEL_USB2_EN--R/W. 18 0 = Disable 1 = Enables Intel-Specific USB2 SMI logic to cause SMI#. LEGACY_USB2_EN--R/W. 17 0 = Disable 1 = Enables legacy USB2 logic to cause SMI#. 16:15 Reserved PERIODIC_EN--R/W. 14 0 = Disable. 1 = Enables the PCH to generate an SMI# when the PERIODIC_STS bit (PMBASE + 34h, bit 14) is set in the SMI_STS register (PMBASE + 34h). TCO_EN--R/W. 13 0 = Disables TCO logic generating an SMI#. Note that if the NMI2SMI_EN bit is set, SMIs that are caused by re-routed NMIs will not be gated by the TCO_EN bit. Even if the TCO_EN bit is 0, NMIs will still be routed to cause SMIs. 1 = Enables the TCO logic to generate SMI#. NOTE: This bit cannot be written once the TCO_LOCK bit is set. 12 Reserved MCSMI_ENMicrocontroller SMI Enable (MCSMI_EN)--R/W. 11 10:8 0 = Disable. 1 = Enables PCH to trap accesses to the microcontroller range (62h or 66h) and generate an SMI#. Note that "trapped' cycles will be claimed by the PCH on PCI, but not forwarded to LPC. Reserved BIOS Release (BIOS_RLS)--WO. 7 Datasheet 0 = This bit will always return 0 on reads. Writes of 0 to this bit have no effect. 1 = Enables the generation of an SCI interrupt for ACPI software when a one is written to this bit position by BIOS software. NOTE: GBL_STS being set will cause an SCI, even if the SCI_EN bit is not set. Software must take great care not to set the BIOS_RLS bit (which causes GBL_STS to be set) if the SCI handler is not in place. 543 LPC Interface Bridge Registers (D31:F0) Bit Description Software SMI# Timer Enable (SWSMI_TMR_EN)--R/W. 6 0 = Disable. Clearing the SWSMI_TMR_EN bit before the timer expires will reset the timer and the SMI# will not be generated. 1 = Starts Software SMI# Timer. When the SWSMI timer expires (the timeout period depends upon the SWSMI_RATE_SEL bit setting), SWSMI_TMR_STS is set and an SMI# is generated. SWSMI_TMR_EN stays set until cleared by software. APMC_EN--R/W. 5 0 = Disable. Writes to the APM_CNT register will not cause an SMI#. 1 = Enables writes to the APM_CNT register to cause an SMI#. SLP_SMI_EN--R/W. 4 0 = Disables the generation of SMI# on SLP_EN. Note that this bit must be 0 before the software attempts to transition the system into a sleep state by writing a 1 to the SLP_EN bit. 1 = A write of 1 to the SLP_EN bit (bit 13 in PM1_CNT register) will generate an SMI#, and the system will not transition to the sleep state based on that write to the SLP_EN bit. LEGACY_USB_EN--R/W. 3 0 = Disable. 1 = Enables legacy USB circuit to cause SMI#. BIOS_EN--R/W. 2 0 = Disable. 1 = Enables the generation of SMI# when ACPI software writes a 1 to the GBL_RLS bit (D31:F0:PMBase + 04h:bit 2). Note that if the BIOS_STS bit (D31:F0:PMBase + 34h:bit 2), which gets set when software writes 1 to GBL_RLS bit, is already a 1 at the time that BIOS_EN becomes 1, an SMI# will be generated when BIOS_EN gets set. End of SMI (EOS)--R/W (special). This bit controls the arbitration of the SMI signal to the processor. This bit must be set for the PCH to assert SMI# low to the processor after SMI# has been asserted previously. 1 0 = Once the PCH asserts SMI# low, the EOS bit is automatically cleared. 1 = When this bit is set to 1, SMI# signal will be de-asserted for 4 PCI clocks before its assertion. In the SMI handler, the processor should clear all pending SMIs (by servicing them and then clearing their respective status bits), set the EOS bit, and exit SMM. This will allow the SMI arbiter to re-assert SMI upon detection of an SMI event and the setting of a SMI status bit. NOTE: The PCH is able to generate 1st SMI after reset even though EOS bit is not set. Subsequent SMI require EOS bit is set. GBL_SMI_EN--R/W. 0 544 0 = No SMI# will be generated by PCH. This bit is reset by a PCI reset event. 1 = Enables the generation of SMI# in the system upon any enabled SMI event. NOTE: When the SMI_LOCK bit is set, this bit cannot be changed. Datasheet LPC Interface Bridge Registers (D31:F0) 13.8.3.9 SMI_STS--SMI Status Register I/O Address: Default Value: Lockable: Power Well: Note: PMBASE + 34h 00000000h No Core Attribute: Size: Usage: RO, R/WC 32-bit ACPI or Legacy If the corresponding _EN bit is set when the _STS bit is set, the PCH will cause an SMI# (except bits 8-10 and 12, which do not need enable bits since they are logic ORs of other registers that have enable bits). The PCH uses the same GPE0_EN register (I/O address: PMBase+2Ch) to enable/disable both SMI and ACPI SCI general purpose input events. ACPI OS assumes that it owns the entire GPE0_EN register per the ACPI specification. Problems arise when some of the general-purpose inputs are enabled as SMI by BIOS, and some of the general purpose inputs are enabled for SCI. In this case ACPI OS turns off the enabled bit for any GPIx input signals that are not indicated as SCI general-purpose events at boot, and exit from sleeping states. BIOS should define a dummy control method which prevents the ACPI OS from clearing the SMI GPE0_EN bits. Bit 31:28 Description Reserved 27 GPIO_UNLOCK_SMI_STS--R/WC. This bit will be set if the GPIO registers lockdown logic is requesting an SMI#. Writing a 1 to this bit position clears this bit to 0. 26 SPI_STS--RO. This bit will be set if the SPI logic is generating an SMI#. This bit is read only because the sticky status and enable bits associated with this function are located in the SPI registers. 25:22 Reserved 21 MONITOR_STS--RO. This bit will be set if the Trap/SMI logic has caused the SMI. This will occur when the processor or a bus master accesses an assigned register (or a sequence of accesses). See Section 10.1.26 through Section 10.1.42 for details on the specific cause of the SMI. 20 PCI_EXP_SMI_STS--RO. PCI Express* SMI event occurred. This could be due to a PCI Express PME event or Hot-Plug event. 19 Reserved 18 INTEL_USB2_STS--RO. This non-sticky read-only bit is a logical OR of each of the SMI status bits in the Intel-Specific USB2 SMI Status Register ANDed with the corresponding enable bits. Additionally, the Port Disable Write Enable SMI is reported in this bit; the specific status bit for this event is contained in the USB Per-Port Registers Write Control Register in this I/O space. This bit will not be active if the enable bits are not set. Writes to this bit will have no effect. All integrated USB2 Host Controllers are represented with this bit. 17 LEGACY_USB2_STS--RO. This non-sticky read-only bit is a logical OR of each of the SMI status bits in the USB2 Legacy Support Register ANDed with the corresponding enable bits. This bit will not be active if the enable bits are not set. Writes to this bit will have no effect. All integrated USB2 Host Controllers are represented with this bit. Datasheet 545 LPC Interface Bridge Registers (D31:F0) Bit Description SMBus SMI Status (SMBUS_SMI_STS)--R/WC. Software clears this bit by writing a 1 to it. 16 0 = This bit is set from the 64 kHz clock domain used by the SMBus. Software must wait at least 15.63 s after the initial assertion of this bit before clearing it. 1 = Indicates that the SMI# was caused by: 1. The SMBus Slave receiving a message that an SMI# should be caused, or 2. The SMBALERT# signal goes active and the SMB_SMI_EN bit is set and the SMBALERT_DIS bit is cleared, or 3. The SMBus Slave receiving a Host Notify message and the HOST_NOTIFY_INTREN and the SMB_SMI_EN bits are set, or 4. The PCH detecting the SMLINK_SLAVE_SMI command while in the S0 state. SERIRQ_SMI_STS--RO. 15 0 = SMI# was not caused by the SERIRQ decoder. 1 = Indicates that the SMI# was caused by the SERIRQ decoder. NOTE: This is not a sticky bit PERIODIC_STS--R/WC. Software clears this bit by writing a 1 to it. 14 0 = Software clears this bit by writing a 1 to it. 1 = This bit is set at the rate determined by the PER_SMI_SEL bits. If the PERIODIC_EN bit (PMBASE + 30h, bit 14) is also set, the PCH generates an SMI#. TCO_STS--R/WC. Software clears this bit by writing a 1 to it. 13 0 = SMI# not caused by TCO logic. 1 = Indicates the SMI# was caused by the TCO logic. Note that this is not a wake event. Device Monitor Status (DEVMON_STS)--RO. 12 0 = SMI# not caused by Device Monitor. 1 = Set if bit 0 of the DEVACT_STS register (PMBASE + 44h) is set. The bit is not sticky, so writes to this bit will have no effect. Microcontroller SMI# Status (MCSMI_STS)--R/WC. Software clears this bit by writing a 1 to it. 11 10 0 = Indicates that there has been no access to the power management microcontroller range (62h or 66h). 1 = Set if there has been an access to the power management microcontroller range (62h or 66h) and the Microcontroller Decode Enable #1 bit in the LPC Bridge I/O Enables configuration register is 1 (D31:F0:Offset 82h:bit 11). Note that this implementation assumes that the Microcontroller is on LPC. If this bit is set, and the MCSMI_EN bit is also set, the PCH will generate an SMI#. GPE0_STS--RO. This bit is a logical OR of the bits in the ALT_GP_SMI_STS register that are also set up to cause an SMI# (as indicated by the GPI_ROUT registers) and have the corresponding bit set in the ALT_GP_SMI_EN register. Bits that are not routed to cause an SMI# will have no effect on this bit. 0 = SMI# was not generated by a GPI assertion. 1 = SMI# was generated by a GPI assertion. 9 GPE0_STS--RO. This bit is a logical OR of the bits 47:32, 14:10, 8, 6:2, and 0 in the GPE0_STS register (PMBASE + 28h) that also have the corresponding bit set in the GPE0_EN register (PMBASE + 2Ch). 0 = SMI# was not generated by a GPE0 event. 1 = SMI# was generated by a GPE0 event. 8 7 546 PM1_STS_REG--RO. This is an ORs of the bits in the ACPI PM1 Status Register (offset PMBASE+00h) that can cause an SMI#. 0 = SMI# was not generated by a PM1_STS event. 1 = SMI# was generated by a PM1_STS event. Reserved Datasheet LPC Interface Bridge Registers (D31:F0) Bit Description SWSMI_TMR_STS--R/WC. Software clears this bit by writing a 1 to it. 6 0 = Software SMI# Timer has Not expired. 1 = Set by the hardware when the Software SMI# Timer expires. APM_STS--R/WC. Software clears this bit by writing a 1 to it. 5 0 = No SMI# generated by write access to APM Control register with APMCH_EN bit set. 1 = SMI# was generated by a write access to the APM Control register with the APMC_EN bit set. SLP_SMI_STS--R/WC. Software clears this bit by writing a 1 to the bit location. 4 3 0 = No SMI# caused by write of 1 to SLP_EN bit when SLP_SMI_EN bit is also set. 1 = Indicates an SMI# was caused by a write of 1 to SLP_EN bit when SLP_SMI_EN bit is also set. LEGACY_USB_STS--RO. This bit is a logical OR of each of the SMI status bits in the USB Legacy Keyboard/Mouse Control Registers ANDed with the corresponding enable bits. This bit will not be active if the enable bits are not set. 0 = SMI# was not generated by USB Legacy event. 1 = SMI# was generated by USB Legacy event. BIOS_STS--R/WC. 2 1:0 13.8.3.10 0 = No SMI# generated due to ACPI software requesting attention. 1 = This bit gets set by hardware when a 1 is written by software to the GBL_RLS bit (D31:F0:PMBase + 04h:bit 2). When both the BIOS_EN bit (D31:F0:PMBase + 30h:bit 2) and the BIOS_STS bit are set, an SMI# will be generated. The BIOS_STS bit is cleared when software writes a 1 to its bit position. Reserved ALT_GP_SMI_EN--Alternate GPI SMI Enable Register I/O Address: Default Value: Lockable: Power Well: Bit PMBASE +38h 0000h No Resume Attribute: Size: Usage: R/W 16-bit ACPI or Legacy Description Alternate GPI SMI Enable--R/W. These bits are used to enable the corresponding GPIO to cause an SMI#. For these bits to have any effect, the following must be true. * The corresponding bit in the ALT_GP_SMI_EN register is set. 15:0 * The corresponding GPI must be routed in the GPI_ROUT register to cause an SMI. * The corresponding GPIO must be implemented. NOTE: Mapping is as follows: bit 15 corresponds to GPIO15... bit 0 corresponds to GPIO0. Datasheet 547 LPC Interface Bridge Registers (D31:F0) 13.8.3.11 ALT_GP_SMI_STS--Alternate GPI SMI Status Register I/O Address: Default Value: Lockable: Power Well: PMBASE +3Ah 0000h No Resume Bit Attribute: Size: Usage: R/WC 16-bit ACPI or Legacy Description Alternate GPI SMI Status--R/WC. These bits report the status of the corresponding GPIOs. 0 = Inactive. Software clears this bit by writing a 1 to it. 1 = Active 15:0 These bits are sticky. If the following conditions are true, then an SMI# will be generated and the GPE0_STS bit set: * The corresponding bit in the ALT_GPI_SMI_EN register (PMBASE + 38h) is set * The corresponding GPIO must be routed in the GPI_ROUT register to cause an SMI. * The corresponding GPIO must be implemented. All bits are in the resume well. Default for these bits is dependent on the state of the GPIO pins. 13.8.3.12 UPRWC--USB Per-Port Registers Write Control I/O Address: Default Value: Lockable: Power Well: PMBASE +3Ch 0000h No Resume Bit 15:9 Attribute: Size: Usage: R/WC, R/W, R/WO 16-bit ACPI or Legacy Description Reserved Write Enable Status--R/WC 8 0 = This bit gets set by hardware when the "Per-Port Registers Write Enable" bit is written from 0 to 1 1 = This bit is cleared by software writing a 1b to this bit location The setting condition takes precedence over the clearing condition in the event that both occur at once. When this bit is 1b and bit 0 is 1b, the INTEL_USB2_STS bit is set in the SMI_STS register. 7:1 Reserved Write Enable SMI Enable--R/WO 0 548 0 = Disable 1 = Enables the generation of SMI when the Per-Port Registers Write Enable (bit 1) is written from 0 to 1. Once written to 1b, this bit can not be cleared by software. Datasheet LPC Interface Bridge Registers (D31:F0) 13.8.3.13 GPE_CNTL--General Purpose Control Register I/O Address: Default Value: Lockable: Power Well: Bit 8:2 2 1 PMBASE +42h 00h No Resume Attribute: Size: Usage: R/W 8-bit ACPI or Legacy Description Reserved GPIO27_POL--R/W. This bit controls the polarity of the GPIO27 pin needed to set the GPIO27_STS bit. 0 = GPIO27 = 0 will set the GPIO27_STS bit. 1 = GPIO27 = 1 will set the GPIO27_STS bit. SWGPE_CTRL--R/W. This bit allows software to control the assertion of SWGPE_STS bit. This bit is used by hardware as the level input signal for the SWGPE_STS bit in the GPE0_STS register. When SWGPE_CTRL is 1, SWGPE_STS will be set to 1, and writes to SWGPE_STS with a value of 1 to clear SWGPE_STS will result in SWGPE_STS being set back to 1 by hardware. When SWGPE_CTRL is 0, writes to SWGPE_STS with a value of 1 will clear SWGPE_STS to 0. This bit is cleared to 0 based on a Power Button Override, CPU Thermal Event as well as by the RSMRST# pin assertion. 0 Datasheet Reserved 549 LPC Interface Bridge Registers (D31:F0) 13.8.3.14 DEVACT_STS--Device Activity Status Register I/O Address: Default Value: Lockable: Power Well: PMBASE +44h 0000h No Core Attribute: Size: Usage: R/WC 16-bit Legacy Only Each bit indicates if an access has occurred to the corresponding device's trap range, or for bits 6:9 if the corresponding PCI interrupt is active. This register is used in conjunction with the Periodic SMI# timer to detect any system activity for legacy power management. The periodic SMI# timer indicates if it is the right time to read the DEVACT_STS register (PMBASE + 44h). Note: Software clears bits that are set in this register by writing a 1 to the bit position. Bit 15:13 Description Reserved KBC_ACT_STS--R/WC. KBC (60/64h). 12 11:10 0 = Indicates that there has been no access to this device I/O range. 1 = This device I/O range has been accessed. Clear this bit by writing a 1 to the bit location. Reserved PIRQDH_ACT_STS--R/WC. PIRQ[D or H]. 9 0 = The corresponding PCI interrupts have not been active. 1 = At least one of the corresponding PCI interrupts has been active. Clear this bit by writing a 1 to the bit location. PIRQCG_ACT_STS--R/WC. PIRQ[C or G]. 8 0 = The corresponding PCI interrupts have not been active. 1 = At least one of the corresponding PCI interrupts has been active. Clear this bit by writing a 1 to the bit location. PIRQBF_ACT_STS--R/WC. PIRQ[B or F]. 7 0 = The corresponding PCI interrupts have not been active. 1 = At least one of the corresponding PCI interrupts has been active. Clear this bit by writing a 1 to the bit location. PIRQAE_ACT_STS--R/WC. PIRQ[A or E]. 6 5:0 13.8.3.15 0 = The corresponding PCI interrupts have not been active. 1 = At least one of the corresponding PCI interrupts has been active. Clear this bit by writing a 1 to the bit location. Reserved PM2_CNT--Power Management 2 Control Register I/O Address: Default Value: Lockable: Power Well: Bit 7:1 0 550 PMBASE + 50h (ACPI PM2_CNT_BLK) 00h No Core Attribute: Size: Usage: R/W 8-bit ACPI Description Reserved Arbiter Disable (ARB_DIS)--R/W This bit is a scratchpad bit for legacy software compatibility. Datasheet LPC Interface Bridge Registers (D31:F0) 13.9 System Management TCO Registers The TCO logic is accessed using registers mapped to the PCI configuration space (Device 31:Function 0) and the system I/O space. For TCO PCI Configuration registers, see LPC Device 31:Function 0 PCI Configuration registers. TCO Register I/O Map The TCO I/O registers reside in a 32-byte range pointed to by a TCOBASE value, which is, PMBASE + 60h in the PCI config space. The following table shows the mapping of the registers within that 32-byte range. Each register is described in the following sections. Table 13-12. TCO I/O Register Address Map 13.9.1 TCOBASE + Offset Mnemonic Register Name Default Type 00h-01h TCO_RLD TCO Timer Reload and Current Value 0000h R/W 02h TCO_DAT_IN 00h R/W 03h TCO_DAT_OUT 00h R/W 04h-05h TCO1_STS TCO1 Status 0000h R/WC, RO 06h-07h TCO2_STS TCO2 Status 0000h R/WC 08h-09h TCO1_CNT TCO1 Control 0000h R/W, R/WLO, R/WC 0Ah-0Bh TCO2_CNT TCO2 Control 0008h R/W 0Ch-0Dh TCO_MESSAGE1, TCO_MESSAGE2 00h R/W 0Eh TCO_WDCNT 00h R/W 0Fh -- -- -- 10h SW_IRQ_GEN 03h R/W 11h -- -- -- 12h-13h TCO_TMR 0004h R/W 14h-1Fh -- -- -- TCO Data Out TCO Message 1 and 2 Watchdog Control Reserved Software IRQ Generation Reserved TCO Timer Initial Value Reserved TCO_RLD--TCO Timer Reload and Current Value Register I/O Address: Default Value: Lockable: Bit 15:10 9:0 Datasheet TCO Data In TCOBASE +00h 0000h No Attribute: Size: Power Well: R/W 16-bit Core Description Reserved TCO Timer Value--R/W. Reading this register will return the current count of the TCO timer. Writing any value to this register will reload the timer to prevent the timeout. 551 LPC Interface Bridge Registers (D31:F0) 13.9.2 TCO_DAT_IN--TCO Data In Register I/O Address: Default Value: Lockable: 13.9.3 Attribute: Size: Power Well: R/W 8-bit Core Bit Description 7:0 TCO Data In Value--R/W. This data register field is used for passing commands from the OS to the SMI handler. Writes to this register will cause an SMI and set the SW_TCO_SMI bit in the TCO1_STS register (D31:F0:04h). TCO_DAT_OUT--TCO Data Out Register I/O Address: Default Value: Lockable: 13.9.4 TCOBASE +02h 00h No TCOBASE +03h 00h No Attribute: Size: Power Well: R/W 8-bit Core Bit Description 7:0 TCO Data Out Value--R/W. This data register field is used for passing commands from the SMI handler to the OS. Writes to this register will set the TCO_INT_STS bit in the TCO_STS1 register. It will also cause an interrupt, as selected by the TCO_INT_SEL bits. TCO1_STS--TCO1 Status Register I/O Address: Default Value: Lockable: TCOBASE +04h 2000h `Size: No Bit 15:14 13 Attribute: 16-bit Power Well: R/WC, RO Core (Except bit 7, in RTC) Description Reserved TCO_SLVSEL (TCO Slave Select)--RO. This register bit is Read Only by Host and indicates the value of TCO Slave Select Soft Strap. See the PCH Soft Straps section of the SPI Chapter for details. DMISERR_STS--R/WC. 12 11 0 = Software clears this bit by writing a 1 to it. 1 = PCH received a DMI special cycle message using DMI indicating that it wants to cause an SERR#. The software must read the Processor to determine the reason for the SERR#. Reserved DMISMI_STS--R/WC. 10 0 = Software clears this bit by writing a 1 to it. 1 = PCH received a DMI special cycle message using DMI indicating that it wants to cause an SMI. The software must read the Processor to determine the reason for the SMI. DMISCI_STS--R/WC. 9 552 0 = Software clears this bit by writing a 1 to it. 1 = PCH received a DMI special cycle message using DMI indicating that it wants to cause an SCI. The software must read the Processor to determine the reason for the SCI. Datasheet LPC Interface Bridge Registers (D31:F0) Bit Description BIOSWR_STS--R/WC. 8 0 = Software clears this bit by writing a 1 to it. 1 = PCH sets this bit and generates and SMI# to indicate an invalid attempt to write to the BIOS. This occurs when either: a) The BIOSWP bit is changed from 0 to 1 and the BLD bit is also set, or b) any write is attempted to the BIOS and the BIOSWP bit is also set. NOTE: On write cycles attempted to the 4 MB lower alias to the BIOS space, the BIOSWR_STS will not be set. NEWCENTURY_STS--R/WC. This bit is in the RTC well. 0 = Cleared by writing a 1 to the bit position or by RTCRST# going active. 1 = This bit is set when the Year byte (RTC I/O space, index offset 09h) rolls over from 99 to 00. Setting this bit will cause an SMI# (but not a wake event). 7 NOTE: The NEWCENTURY_STS bit is not valid when the RTC battery is first installed (or when RTC power has not been maintained). Software can determine if RTC power has not been maintained by checking the RTC_PWR_STS bit (D31:F0:A4h, bit 2), or by other means (such as a checksum on RTC RAM). If RTC power is determined to have not been maintained, BIOS should set the time to a valid value and then clear the NEWCENTURY_STS bit. The NEWCENTURY_STS bit may take up to 3 RTC clocks for the bit to be cleared after a 1 is written to the bit to clear it. After writing a 1 to this bit, software should not exit the SMI handler until verifying that the bit has actually been cleared. This will ensure that the SMI is not re-entered. 6:4 Reserved TIMEOUT--R/WC. 3 0 = Software clears this bit by writing a 1 to it. 1 = Set by PCH to indicate that the SMI was caused by the TCO timer reaching 0. TCO_INT_STS--R/WC. 2 0 = Software clears this bit by writing a 1 to it. 1 = SMI handler caused the interrupt by writing to the TCO_DAT_OUT register (TCOBASE + 03h). SW_TCO_SMI--R/WC. 1 0 = Software clears this bit by writing a 1 to it. 1 = Software caused an SMI# by writing to the TCO_DAT_IN register (TCOBASE + 02h). NMI2SMI_STS--RO. 0 Datasheet 0 = Cleared by clearing the associated NMI status bit. 1 = Set by the PCH when an SMI# occurs because an event occurred that would otherwise have caused an NMI (because NMI2SMI_EN is set). 553 LPC Interface Bridge Registers (D31:F0) 13.9.5 TCO2_STS--TCO2 Status Register I/O Address: Default Value: Lockable: TCOBASE +06h 0000h No Bit 15:5 Attribute: Size: Power Well: R/WC 16-bit Resume (Except Bit 0, in RTC) Description Reserved SMLink Slave SMI Status (SMLINK_SLV_SMI_STS)--R/WC. Allow the software to go directly into a pre-determined sleep state. This avoids race conditions. Software clears this bit by writing a 1 to it. 4 3 0 = The bit is reset by RSMRST#, but not due to the PCI Reset associated with exit from S3-S5 states. 1 = PCH sets this bit to 1 when it receives the SMI message on the SMLink Slave Interface. Reserved BOOT_STS--R/WC. 2 0 = Cleared by PCH based on RSMRST# or by software writing a 1 to this bit. Note that software should first clear the SECOND_TO_STS bit before writing a 1 to clear the BOOT_STS bit. 1 = Set to 1 when the SECOND_TO_STS bit goes from 0 to 1 and the processor has not fetched the first instruction. If rebooting due to a second TCO timer timeout, and if the BOOT_STS bit is set, the PCH will reboot using the `safe' multiplier (1111). This allows the system to recover from a processor frequency multiplier that is too high, and allows the BIOS to check the BOOT_STS bit at boot. If the bit is set and the frequency multiplier is 1111, then the BIOS knows that the processor has been programmed to an invalid multiplier. SECOND_TO_STS--R/WC. 1 0 = Software clears this bit by writing a 1 to it, or by a RSMRST#. 1 = PCH sets this bit to 1 to indicate that the TIMEOUT bit had been (or is currently) set and a second timeout occurred before the TCO_RLD register was written. If this bit is set and the NO_REBOOT config bit is 0, then the PCH will reboot the system after the second timeout. The reboot is done by asserting PLTRST#. Intruder Detect (INTRD_DET)--R/WC. 0 = Software clears this bit by writing a 1 to it, or by RTCRST# assertion. 1 = Set by PCH to indicate that an intrusion was detected. This bit is set even if the system is in G3 state. 0 554 NOTES: 1. This bit has a recovery time. After writing a 1 to this bit position (to clear it), the bit may be read back as a 1 for up 65 microseconds before it is read as a 0. Software must be aware of this recovery time when reading this bit after clearing it. 2. If the INTRUDER# signal is active when the software attempts to clear the INTRD_DET bit, the bit will remain as a 1, and the SMI# will be generated again immediately. The SMI handler can clear the INTRD_SEL bits (TCOBASE + 0Ah, bits 2:1), to avoid further SMIs. However, if the INTRUDER# signals goes inactive and then active again, there will not be further SMI's (because the INTRD_SEL bits would select that no SMI# be generated). 3. If the INTRUDER# signal goes inactive some point after the INTRD_DET bit is written as a 1, then the INTRD_DET signal will go to a 0 when INTRUDER# input signal goes inactive. Note that this is slightly different than a classic sticky bit, since most sticky bits would remain active indefinitely when the signal goes active and would immediately go inactive when a 1 is written to the bit Datasheet LPC Interface Bridge Registers (D31:F0) 13.9.6 TCO1_CNT--TCO1 Control Register I/O Address: Default Value: Lockable: TCOBASE +08h 0000h No Bit 15:13 12 Attribute: Size: Power Well: R/W, R/WLO, R/WC 16-bit Core Description Reserved TCO_LOCK--R/WLO. When set to 1, this bit prevents writes from changing the TCO_EN bit (in offset 30h of Power Management I/O space). Once this bit is set to 1, it can not be cleared by software writing a 0 to this bit location. A core-well reset is required to change this bit from 1 to 0. This bit defaults to 0. TCO Timer Halt (TCO_TMR_HLT)--R/W. 11 10 0 = The TCO Timer is enabled to count. 1 = The TCO Timer will halt. It will not count, and thus cannot reach a value that will cause an SMI# or set the SECOND_TO_STS bit. When set, this bit will prevent rebooting and prevent Alert On LAN event messages from being transmitted on the SMLink (but not Alert On LAN* heartbeat messages). Reserved NMI2SMI_EN--R/W. 0 = Normal NMI functionality. 1 = Forces all NMIs to instead cause SMIs. The functionality of this bit is dependent upon the settings of the NMI_EN bit and the GBL_SMI_EN bit as detailed in the following table: 9 0b 0b No SMI# at all because GBL_SMI_EN = 0 0b 1b SMI# will be caused due to NMI events 1b 0b No SMI# at all because GBL_SMI_EN = 0 1b 1b No SMI# due to NMI because NMI_EN = 1 NMI_NOW--R/WC. 8 7:0 Datasheet 0 = Software clears this bit by writing a 1 to it. The NMI handler is expected to clear this bit. Another NMI will not be generated until the bit is cleared. 1 = Writing a 1 to this bit causes an NMI. This allows the BIOS or SMI handler to force an entry to the NMI handler. Reserved 555 LPC Interface Bridge Registers (D31:F0) 13.9.7 TCO2_CNT--TCO2 Control Register I/O Address: Default Value: Lockable: TCOBASE +0Ah 0008h No Bit 15:6 Attribute: Size: Power Well: R/W 16-bit Resume Description Reserved OS_POLICY--R/W. OS-based software writes to these bits to select the policy that the BIOS will use after the platform resets due the WDT. The following convention is recommended for the BIOS and OS: 00 = Boot normally 5:4 01 = Shut down 10 = Do not load OS. Hold in pre-boot state and use LAN to determine next step 11 = Reserved NOTE: These are just scratchpad bits. They should not be reset when the TCO logic resets the platform due to Watchdog Timer. GPIO11_ALERT_DISABLE--R/W. At reset (using RSMRST# asserted) this bit is set and GPIO[11] alerts are disabled. 3 0 = Enable. 1 = Disable GPIO11/SMBALERT# as an alert source for the heartbeats and the SMBus slave. INTRD_SEL--R/W. This field selects the action to take if the INTRUDER# signal goes active. 2:1 00 = No interrupt or SMI# 01 = Interrupt (as selected by TCO_INT_SEL). 10 = SMI 11 = Reserved 0 13.9.8 Reserved TCO_MESSAGE1 and TCO_MESSAGE2 Registers I/O Address: Default Value: Lockable: Bit 7:0 556 TCOBASE +0Ch (Message 1)Attribute: TCOBASE +0Dh (Message 2) 00h Size: No Power Well: R/W 8-bit Resume Description TCO_MESSAGE[n]--R/W. BIOS can write into these registers to indicate its boot progress. The external microcontroller can read these registers to monitor the boot progress. Datasheet LPC Interface Bridge Registers (D31:F0) 13.9.9 TCO_WDCNT--TCO Watchdog Control Register Offset Address: TCOBASE + 0Eh Default Value: 00h Power Well: Resume 13.9.10 R/W 8 bits Bit Description 7:0 The BIOS or system management software can write into this register to indicate more details on the boot progress. The register will reset to 00h based on a RSMRST# (but not PLTRST#). The external microcontroller can read this register to monitor boot progress. SW_IRQ_GEN--Software IRQ Generation Register Offset Address: TCOBASE + 10h Default Value: 03h Power Well: Core Bit 7:2 13.9.11 Attribute: Size: Attribute: Size: R/W 8 bits Description Reserved 1 IRQ12_CAUSE--R/W. When software sets this bit to 1, IRQ12 will be asserted. When software sets this bit to 0, IRQ12 will be de-asserted. 0 IRQ1_CAUSE--R/W. When software sets this bit to 1, IRQ1 will be asserted. When software sets this bit to 0, IRQ1 will be de-asserted. TCO_TMR--TCO Timer Initial Value Register I/O Address: Default Value: Lockable: Bit 15:10 9:0 TCOBASE +12h 0004h No Attribute: Size: Power Well: R/W 16-bit Core Description Reserved TCO Timer Initial Value--R/W. Value that is loaded into the timer each time the TCO_RLD register is written. Values of 0000h or 0001h will be ignored and should not be attempted. The timer is clocked at approximately 0.6 seconds, and thus allows timeouts ranging from 1.2 second to 613.8 seconds. NOTE: The timer has an error of 1 tick (0.6 S). The TCO Timer will only count down in the S0 state. Datasheet 557 LPC Interface Bridge Registers (D31:F0) 13.10 General Purpose I/O Registers The control for the general purpose I/O signals is handled through a 128-byte I/O space. The base offset for this space is selected by the GPIOBASE register. Table 13-13. Registers to Control GPIO Address Map GPIOBASE + Offset Mnemonic 00h-03h GPIO_USE_SEL 04h-07h GP_IO_SEL 08h-0Bh -- Default Access GPIO Use Select F96BA1FF R/W GPIO Input/Output Select F6FF6EFFh R/W 0h -- 02FE0100h R/W -- Reserved GPIO Level for Input or Output 0Ch-0Fh GP_LVL 10h-13h -- Reserved 0h 14h-17h -- Reserved 0h -- 18h-1Bh GPO_BLINK GPIO Blink Enable 00040000h R/W 1Ch-1Fh GP_SER_BLINK GP Serial Blink 00000000h R/W 20-23h GP_SB_CMDSTS GP Serial Blink Command Status 00080000h R/W 24-27h GP_SB_DATA GP Serial Blink Data 00000000h R/W 28-29h GPI_NMI_EN GPI NMI Enable 0000 R/W 2A-2Bh GPI_NMI_STS 0000 R/WC 2C-2Fh GPI_INV 00000000h R/W 30h-33h GPIO_USE_SEL2 34h-37h GP_IO_SEL2 38h-3Bh GP_LVL2 3Ch-3Fh -- 40h-43h GPIO_USE_SEL3 44h-47h GPIO_SEL3 48h-4Bh 558 Register Name GP_LVL3 GPI NMI Status GPIO Signal Invert GPIO Use Select 2 020300FEh (mobile only) / 020300FFh (Desktop only) R/W GPIO Input/Output Select 2 1F57FFF4h R/W GPIO Level for Input or Output 2 A4AA0003h R/W Reserved 0h -- GPIO Use Select 3 00000000h (mobile only)/ 00000100h (desktop only) R/W GPIO Input/Output Select 3 00000F00h R/W GPIO Level for Input or Output 3 00000000h R/W 4Ch-5Fh -- 0h -- 60h-63h GP_RST_SEL[31:0] Reserved GPIO Reset Select 1 01000000h R/W 64h-67h GP_RST_SEL[63:32] GPIO Reset Select 2 0h R/W 68h-6Bh GP_RST_SEL[95:64] GPIO Reset Select 3 0h R/W 6Ch-7Fh -- Reserved 0h -- Datasheet LPC Interface Bridge Registers (D31:F0) 13.10.1 GPIO_USE_SEL--GPIO Use Select Register Offset Address: GPIOBASE + 00h Default Value: F96BA1FFh Lockable: Yes Bit Attribute: Size: Power Well: R/W 32-bit Core for 0:7, 16:23, Resume for 8:15, 24:3 Description GPIO_USE_SEL[31:0]--R/W. Each bit in this register enables the corresponding GPIO (if it exists) to be used as a GPIO, rather than for the native function. 31:0 13.10.2 0 = Signal used as native function. 1 = Signal used as a GPIO. NOTES: 1. The following bits are always 1 because they are always unMultiplexed: 0, 8, 15, 24, 27, and 28. 2. If GPIO[n] does not exist, then, the n-bit in this register will always read as 0 and writes will have no effect. The following bits are always 0 in mobile: 15 and 25. 3. After a full reset (RSMRST#) all multiplexed signals in the resume and core wells are configured as their default function. After only a PLTRST#, the GPIOs in the core well are configured as their default function. 4. When configured to GPIO mode, the muxing logic will present the inactive state to native logic that uses the pin as an input. 5. All GPIOs are reset to the default state by CF9h reset except GPIO24. 6. Bit 26 may be overridden by bit 8 in the GEN_PMCON_3 Register. 7. Bit 29 must only be used to configure SLP_LAN# behavior in Sx/Moff when ME FW is not configuring the pin as SLP_LAN#. GPIO29 can not be used for any other usage. GP_IO_SEL--GPIO Input/Output Select Register Offset Address: GPIOBASE +04h Default Value: F6FF6EFFh Lockable: Yes Bit Attribute: Size: Power Well: R/W 32-bit Core for 0:7, 16:23, Resume for 8:15, 24:31 Description GP_IO_SEL[31:0]--R/W. When configured in native mode (GPIO_USE_SEL[n] is 0), writes to these bits have no effect. The value reported in this register is undefined when programmed as native mode. 31:0 0 = Output. The corresponding GPIO signal is an output. 1 = Input. The corresponding GPIO signal is an input. NOTE: GPIO29 can not be configured as an input, must be used as an output in Sx/ Moff to configure SLP_LAN#. Datasheet 559 LPC Interface Bridge Registers (D31:F0) 13.10.3 GP_LVL--GPIO Level for Input or Output Register Offset Address: GPIOBASE +0Ch Default Value: 02FE0100h Lockable: Yes Bit Attribute: Size: Power Well: R/W 32-bit Core for 0:7, 16:23, Resume for 8:15, 24:31 Description GP_LVL[31:0]--R/W. These registers are implemented as dual read/write with dedicated storage each. Write value will be stored in the write register, while read is coming from the read register which will always reflect the value of the pin. 31:0 If GPIO[n] is programmed to be an output (using the corresponding bit in the GP_IO_SEL register), then the corresponding GP_LVL[n] write register value will drive a high or low value on the output pin. 1 = high, 0 = low. When configured in native mode (GPIO_USE_SEL[n] is 0), writes to these bits are stored but have no effect to the pin value. The value reported in this register is undefined when programmed as native mode. NOTE: Bit 29 setting will be ignored if ME FW is configuring SLP_LAN# behavior. 13.10.4 GPO_BLINK--GPO Blink Enable Register Offset Address: GPIOBASE +18h Default Value: 00040000h Lockable: No Bit Attribute: Size: Power Well: R/W 32-bit Core for 0:7, 16:23, Resume for 8:15, 24:31 Description GP_BLINK[31:0]--R/W. The setting of this bit has no effect if the corresponding GPIO signal is programmed as an input. 31:0 0 = The corresponding GPIO will function normally. 1 = If the corresponding GPIO is programmed as an output, the output signal will blink at a rate of approximately once per second. The high and low times have approximately 0.5 seconds each. The GP_LVL bit is not altered when this bit is set. The value of the corresponding GP_LVL bit remains unchanged during the blink process, and does not effect the blink in any way. The GP_LVL bit is not altered when programmed to blink. It will remain at its previous value. These bits correspond to GPIO in the Resume well. These bits revert to the default value based on RSMRST# or a write to the CF9h register (but not just on PLTRST#). NOTE: GPIO18 will blink by default immediately after reset. This signal could be connected to an LED to indicate a failed boot (by programming BIOS to clear GP_BLINK18 after successful POST). 560 Datasheet LPC Interface Bridge Registers (D31:F0) 13.10.5 GP_SER_BLINK--GP Serial Blink Register Offset Address: GPIOBASE +1Ch Default Value: 00000000h Lockable: No Bit Attribute: Size: Power Well: R/W 32-bit Core for 0:7, 16:23, Resume for 8:15, 24:31 Description GP_SER_BLINK[31:0]--R/W. The setting of this bit has no effect if the corresponding GPIO is programmed as an input or if the corresponding GPIO has the GPO_BLINK bit set. When set to a 0, the corresponding GPIO will function normally. 31:0 When using serial blink, this bit should be set to a 1 while the corresponding GP_IO_SEL bit is set to 1. Setting the GP_IO_SEL bit to 0 after the GP_SER_BLINK bit ensures PCH will not drive a 1 on the pin as an output. When this corresponding bit is set to a 1 and the pin is configured to output mode, the serial blink capability is enabled. The PCH will serialize messages through an open-drain buffer configuration. The value of the corresponding GP_LVL bit remains unchanged and does not impact the serial blink capability in any way. Writes to this register have no effect when the corresponding pin is configured in native mode and the read value returned is undefined. Datasheet 561 LPC Interface Bridge Registers (D31:F0) 13.10.6 GP_SB_CMDSTS--GP Serial Blink Command Status Register Offset Address: GPIOBASE +20h Default Value: 00080000h Lockable: No Bit 31:24 Attribute: Size: Power Well: R/W, RO 32-bit Core Description Reserved Data Length Select (DLS)--R/W. This field determines the number of bytes to serialize on GPIO 00 = Serialize bits 7:0 of GP_SB_DATA (1 byte) 01 = Serialize bits 15:0 of GP_SB_DATA (2 bytes) 23:22 10 = Undefined - Software must not write this value 11 = Serialize bits 31:0 of GP_SB_DATA (4 bytes) Software should not modify the value in this register unless the Busy bit is clear. Writes to this register have no effect when the corresponding pin is configured in native mode and the read value returned is undefined. 21:16 Data Rate Select (DRS)--R/W. This field selects the number of 120ns time intervals to count between Manchester data transitions. The default of 8h results in a 960 ns minimum time between transitions. A value of 0h in this register produces undefined behavior. Software should not modify the value in this register unless the Busy bit is clear. 15:9 8 7:1 0 13.10.7 Reserved Busy--RO. This read-only status bit is the hardware indication that a serialization is in progress. Hardware sets this bit to 1 based on the Go bit being set. Hardware clears this bit when the Go bit is cleared by the hardware. Reserved Go--R/W. This bit is set to 1 by software to start the serialization process. Hardware clears the bit after the serialized data is sent. Writes of 0 to this register have no effect. Software should not write this bit to 1 unless the Busy status bit is cleared. GP_SB_DATA--GP Serial Blink Data Register Offset Address: GPIOBASE +24h Default Value: 00000000h Lockable: No 562 Attribute: Size: Power Well: R/W 32-bit Core Bit Description 31:0 GP_SB_DATA[31:0]--R/W. This register contains the data serialized out. The number of bits shifted out are selected through the DLS field in the GP_SB_CMDSTS register. This register should not be modified by software when the Busy bit is set. Datasheet LPC Interface Bridge Registers (D31:F0) 13.10.8 GPI_NMI_EN--GPI NMI Enable Register Offset Address: GPIOBASE +28h Default Value: 00000h Lockable: No Bit 15:0 13.10.9 Attribute: Size: Power Well: R/W 16-bit Core for 0:7 Resume for 8:15 Description GPI_NMI_EN[15:0]. GPI NMI Enable: This bit only has effect if the corresponding GPIO is used as an input and its GPI_ROUT register is being programmed to NMI functionality. When set to 1, it used to allow active-low and active-high inputs (depends on inversion bit) to cause NMI. GPI_NMI_STS--GPI NMI Status Register Offset Address: GPIOBASE +2Ah Default Value: 00000h Lockable: Yes Bit 15:0 Attribute: Size: Power Well: R/WC 16-bit Core for 0:7 Resume for 8:15 Description GPI_NMI_STS[15:0]. GPI NMI Status: GPI_NMI_STS[15:0]. GPI NMI Status: This bit is set if the corresponding GPIO is used as an input, and its GPI_ROUT register is being programmed to NMI functionality and also GPI_NMI_EN bit is set when it detects either: 1) active-high edge when its corresponding GPI_INV is configured with value 0. 2) active-low edge when its corresponding GPI_INV is configured with value 1. NOTE: Writing value of 1 will clear the bit, while writing value of 0 have no effect. 13.10.10 GPI_INV--GPIO Signal Invert Register Offset Address: GPIOBASE +2Ch Default Value: 00000000h Lockable: No Bit 31:16 Attribute: Size: Power Well: R/W 32-bit Core for 17, 16, 7:0 Description Reserved Input Inversion (GP_INV[n])--R/W. This bit only has effect if the corresponding GPIO is used as an input and used by the GPE logic, where the polarity matters. When set to `1', then the GPI is inverted as it is sent to the GPE logic that is using it. This bit has no effect on the value that is reported in the GP_LVL register. 15:0 These bits are used to allow both active-low and active-high inputs to cause SMI# or SCI. Note that in the S0 or S1 state, the input signal must be active for at least two PCI clocks to ensure detection by the PCH. In the S3, S4 or S5 states the input signal must be active for at least 2 RTC clocks to ensure detection. The setting of these bits has no effect if the corresponding GPIO is programmed as an output. These bits correspond to GPI that are in the resume well, and will be reset to their default values by RSMRST# or by a write to the CF9h register. 0 = The corresponding GPI_STS bit is set when the PCH detects the state of the input pin to be high. 1 = The corresponding GPI_STS bit is set when the PCH detects the state of the input pin to be low. Datasheet 563 LPC Interface Bridge Registers (D31:F0) 13.10.11 GPIO_USE_SEL2--GPIO Use Select 2 Register Offset Address: GPIOBASE +30h Default Value: 020300FFh (Desktop) 020300FEh (Mobile) Lockable: Yes Bit Attribute: Size: R/W 32-bit Power Well: Core for 0:7, 16:23, Resume for 8:15, 24:31 Description GPIO_USE_SEL2[63:32]--R/W. Each bit in this register enables the corresponding GPIO (if it exists) to be used as a GPIO, rather than for the native function. 0 = Signal used as native function. 1 = Signal used as a GPIO. 31:0 NOTES: 1. The following bit are always 1 because it is always unMultiplexed: 3, 25. The following bits are unMultiplexed in desktop and are also 1: 0. 2. If GPIO[n] does not exist, then, the (n-32) bit in this register will always read as 0 and writes will have no effect. The following bits are always 0: 29, 30 and 31. The following bit is also not used in mobile and is always 0: 0. 3. After a full reset RSMRST# all multiplexed signals in the resume and core wells are configured as their default function. After only a PLTRST#, the GPIOs in the core well are configured as their default function. 4. When configured to GPIO mode, the muxing logic will present the inactive state to native logic that uses the pin as an input. 5. Bit 26 is ignored, functionality is configured by bits 9:8 of FLMAP0 register. This register corresponds to GPIO[63:32]. Bit 0 corresponds to GPIO32 and bit 28 corresponds to GPIO60. 13.10.12 GP_IO_SEL2--GPIO Input/Output Select 2 Register Offset Address: GPIOBASE +34h Default Value: 1F57FFF4h Lockable: Yes Bit Attribute: R/W Power Well: Core for 0:7, 16:23, Resume for 8:15, 24:31 Description GP_IO_SEL2[63:32]--R/W. 31:0 0 = GPIO signal is programmed as an output. 1 = Corresponding GPIO signal (if enabled in the GPIO_USE_SEL2 register) is programmed as an input. This register corresponds to GPIO[63:32]. Bit 0 corresponds to GPIO32. 564 Datasheet LPC Interface Bridge Registers (D31:F0) 13.10.13 GP_LVL2--GPIO Level for Input or Output 2 Register Offset Address: GPIOBASE +38h Default Value: A4AA0003h Lockable: Yes Bit Attribute: Size: Power Well: R/W 32-bit Core for 0:7, 16:23, Resume for 8:15, 24:31 Description GP_LVL[63:32]--R/W. 31:0 These registers are implemented as dual read/write with dedicated storage each. Write value will be stored in the write register, while read is coming from the read register which will always reflect the value of the pin. If GPIO[n] is programmed to be an output (using the corresponding bit in the GP_IO_SEL register), then the corresponding GP_LVL[n] write register value will drive a high or low value on the output pin. 1 = high, 0 = low. When configured in native mode (GPIO_USE_SEL[n] is 0), writes to these bits are stored but have no effect to the pin value. The value reported in this register is undefined when programmed as native mode. NOTE: This register corresponds to GPIO[63:32]. Bit 0 corresponds to GPIO32. Datasheet 565 LPC Interface Bridge Registers (D31:F0) 13.10.14 GPIO_USE_SEL3--GPIO Use Select 3 Register Offset Address: GPIOBASE +40h Default Value: 00000100h (Desktop) 00000000h (Mobile) Lockable: Yes Bit 31:9 Attribute: Size: R/W 32-bit Power Well: Core for 0:7, 16:23, Resume for 8:15, 24:31 Description Always 0. No corresponding GPIO. GPIO_USE_SEL3[75:72]--R/W. Each bit in this register enables the corresponding GPIO (if it exists) to be used as a GPIO, rather than for the native function. 0 = Signal used as native function. 1 = Signal used as a GPIO. 11:8 NOTES: 1. The following bit is always 1 because it is always unMultiplexed: 8 2. If GPIO[n] does not exist, then, the (n-32) bit in this register will always read as 0 and writes will have no effect. 3. After a full reset RSMRST# all multiplexed signals in the resume and core wells are configured as their default function. After only a PLTRST#, the GPIOs in the core well are configured as their default function. 4. When configured to GPIO mode, the muxing logic will present the inactive state to native logic that uses the pin as an input. This register corresponds to GPIO[95:64]. Bit 0 corresponds to GPIO64 and bit 32 corresponds to GPIO95. 7:4 Always 0. No corresponding GPIO. GPIO_USE_SEL3[67:64]--R/W. Each bit in this register enables the corresponding GPIO (if it exists) to be used as a GPIO, rather than for the native function. 0 = Signal used as native function. 1 = Signal used as a GPIO. 3:0 NOTES: 1. If GPIO[n] does not exist, then, the (n-32) bit in this register will always read as 0 and writes will have no effect. 2. After a full reset RSMRST# all multiplexed signals in the resume and core wells are configured as their default function. After only a PLTRST#, the GPIOs in the core well are configured as their default function. 3. When configured to GPIO mode, the muxing logic will present the inactive state to native logic that uses the pin as an input. This register corresponds to GPIO[95:64]. Bit 0 corresponds to GPIO64 and bit 32 corresponds to GPIO95. 566 Datasheet LPC Interface Bridge Registers (D31:F0) 13.10.15 GP_IO_SEL3--GPIO Input/Output Select 3 Register Offset Address: GPIOBASE +44h Default Value: 00000F00 Lockable: Yes Bit 31:12 Attribute: Size: Power Well: R/W 32-bit Core for 0:7, 16:23, Resume for 8:15, 24:31 Description Always 0. No corresponding GPIO. GPIO_IO_SEL3[75:72]--R/W. 11:8 0 = GPIO signal is programmed as an output. 1 = Corresponding GPIO signal (if enabled in the GPIO_USE_SEL3 register) is programmed as an input. This register corresponds to GPIO[95:64]. Bit 0 corresponds to GPIO64. 7:4 Always 0. No corresponding GPIO. GPIO_IO_SEL3[67:64]--R/W. 3:0 0 = GPIO signal is programmed as an output. 1 = Corresponding GPIO signal (if enabled in the GPIO_USE_SEL3 register) is programmed as an input. This register corresponds to GPIO[95:64]. Bit 0 corresponds to GPIO64. Datasheet 567 LPC Interface Bridge Registers (D31:F0) 13.10.16 GP_LVL3--GPIO Level for Input or Output 3 Register Offset Address: GPIOBASE +48h Default Value: 00000000h Lockable: Yes Bit 31:12 Attribute: Size: Power Well: R/W 32-bit Core for 0:7, 16:23, Resume for 8:15, 24:31 Description Always 0. No corresponding GPIO. GP_LVL[75:72]--R/W. 11:8 These registers are implemented as dual read/write with dedicated storage each. Write value will be stored in the write register, while read is coming from the read register which will always reflect the value of the pin. If GPIO[n] is programmed to be an output (using the corresponding bit in the GP_IO_SEL register), then the corresponding GP_LVL[n] write register value will drive a high or low value on the output pin. 1 = high, 0 = low. When configured in native mode (GPIO_USE_SEL[n] is 0), writes to these bits are stored but have no effect to the pin value. The value reported in this register is undefined when programmed as native mode. This register corresponds to GPIO[95:64]. Bit 0 corresponds to GPIO64. 7:4 Always 0. No corresponding GPIO. GP_LVL[67:64]--R/W. 3:0 These registers are implemented as dual read/write with dedicated storage each. Write value will be stored in the write register, while read is coming from the read register which will always reflect the value of the pin. If GPIO[n] is programmed to be an output (using the corresponding bit in the GP_IO_SEL register), then the corresponding GP_LVL[n] write register value will drive a high or low value on the output pin. 1 = high, 0 = low. When configured in native mode (GPIO_USE_SEL[n] is 0), writes to these bits are stored but have no effect to the pin value. The value reported in this register is undefined when programmed as native mode. This register corresponds to GPIO[95:64]. Bit 0 corresponds to GPIO64. 568 Datasheet LPC Interface Bridge Registers (D31:F0) 13.10.17 GP_RST_SEL1--GPIO Reset Select Register Offset Address: GPIOBASE +60h Default Value: 01000000h Lockable: Yes Bit Attribute: Size: Power Well: R/W 32-bit Core for 0:7, 16:23, Resume for 8:15, 24:31 Description GP_RST_SEL[31:24]--R/W. 31:24 0 = Corresponding GPIO registers will be reset by host partition reset, global resets, and straight-to-S5 events such as THRMTRIP# or Power Button Override. 1 = Corresponding GPIO registers will be reset by RSMRST# assertion only. NOTE: GPIO[24] register bits are not cleared by CF9h reset by default. NOTE: For a list of causes of host partition and global resets, see Table 5-35. 23:16 Reserved GP_RST_SEL[15:8]--R/W. 15:8 0 = Corresponding GPIO registers will be reset by host partition reset, global resets, and straight-to-S5 events such as THRMTRIP# or Power Button Override. 1 = Corresponding GPIO registers will be reset by RSMRST# assertion only. NOTE: For a list of causes of host partition and global resets, see Table 5-35. 7:0 Reserved 13.10.18 GP_RST_SEL2--GPIO Reset Select Register Offset Address: GPIOBASE +64h Default Value: 00000000h Lockable: Yes Bit Attribute: Size: Power Well: R/W 32-bit Core for 0:7, 16:23, Resume for 8:15, 24:31 Description GP_RST_SEL[63:56]--R/W. 31:24 0 = Corresponding GPIO registers will be reset by host partition reset, global resets, and straight-to-S5 events such as THRMTRIP# or Power Button Override. 1 = Corresponding GPIO registers will be reset by RSMRST# assertion only. NOTE: For a list of causes of host partition and global resets, see Table 5-35. 23:16 Reserved GP_RST_SEL[47:40]--R/W. 15:8 0 = Corresponding GPIO registers will be reset by host partition reset, global resets, and straight-to-S5 events such as THRMTRIP# or Power Button Override. 1 = Corresponding GPIO registers will be reset by RSMRST# assertion only. NOTE: For a list of causes of host partition and global resets, see Table 5-35. 7:0 Datasheet Reserved 569 LPC Interface Bridge Registers (D31:F0) 13.10.19 GP_RST_SEL3--GPIO Reset Select Register Offset Address: GPIOBASE +68h Default Value: 00000000h Lockable: Yes Bit 31:12 Attribute: Size: Power Well: R/W 32-bit Core for 0:7, 16:23, Resume for 8:15, 24:31 Description Reserved GP_RST_SEL[75:72]--R/W. 11:8 0 = Corresponding GPIO registers will be reset by host partition reset, global resets, and straight-to-S5 events such as THRMTRIP# or Power Button Override. 1 = Corresponding GPIO registers will be reset by RSMRST# assertion only. NOTE: For a list of causes of host partition and global resets, see Table 5-35. 7:0 Reserved 570 Datasheet SATA Controller Registers (D31:F2) 14 SATA Controller Registers (D31:F2) 14.1 PCI Configuration Registers (SATA-D31:F2) Note: Address locations that are not shown should be treated as Reserved. All of the SATA registers are in the core well. None of the registers can be locked. Table 14-1. SATA Controller PCI Register Address Map (SATA-D31:F2) (Sheet 1 of 2) Datasheet Offset Mnemonic 00h-01h VID 02h-03h DID 04h-05h PCICMD 06h-07h PCISTS 08h RID 09h PI 0Ah Register Name Default Type Vendor Identification 8086h RO Device Identification See register description RO PCI Command 0000h R/W, RO PCI Status 02B0h R/WC, RO Revision Identification See register description RO Programming Interface See register description See register description SCC Sub Class Code See register description See register description 0Bh BCC Base Class Code 01h RO 0Dh PMLT Primary Master Latency Timer 00h RO 0Eh HTYPE Header Type 00h RO 10h-13h PCMD_BAR Primary Command Block Base Address 00000001h R/W, RO 14h-17h PCNL_BAR Primary Control Block Base Address 00000001h R/W, RO 18h-1Bh SCMD_BAR Secondary Command Block Base Address 00000001h R/W, RO 1Ch-1Fh SCNL_BAR Secondary Control Block Base Address 00000001h R/W, RO 20h-23h BAR Legacy Bus Master Base Address 00000001h R/W, RO 24h-27h ABAR / SIDPBA AHCI Base Address / SATA Index Data Pair Base Address See register description See register description 2Ch-2Dh SVID Subsystem Vendor Identification 0000h R/WO 2Eh-2Fh SID Subsystem Identification 0000h R/WO 34h CAP Capabilities Pointer 80h RO 3Ch INT_LN Interrupt Line 00h R/W 3Dh INT_PN Interrupt Pin See register description RO 40h-41h IDE_TIM Primary IDE Timing Register 0000h R/W 571 SATA Controller Registers (D31:F2) Table 14-1. SATA Controller PCI Register Address Map (SATA-D31:F2) (Sheet 2 of 2) Offset Mnemonic Register Name Default Type 42h-43h IDE_TIM Secondary IDE Timing Register 0000h R/W 44h SIDETIM Slave IDE Timing 00h R/W 48h SDMA_CNT Synchronous DMA Control 00h R/W 4Ah-4Bh SDMA_TIM Synchronous DMA Timing 54h-57h IDE_CONFIG 70h-71h 0000h R/W IDE I/O Configuration 00000000h R/W PID PCI Power Management Capability ID See register description RO 72h-73h PC PCI Power Management Capabilities See register description RO 74h-75h PMCS PCI Power Management Control and Status See register description R/W, RO, R/WC 80h-81h MSICI Message Signaled Interrupt Capability ID 7005h RO 82h-83h MSIMC Message Signaled Interrupt Message Control 0000h RO, R/W 84h-87h MSIMA Message Signaled Interrupt Message Address 00000000h RO, R/W 88h-89h MSIMD Message Signaled Interrupt Message Data 0000h R/W 90h MAP Address Map 0000h R/W 92h-93h PCS Port Control and Status 94h-97h SCGC 9Ch-9Fh SCLKGC A0h SIRI SATA Indexed Registers Index 0000h R/W, RO SATA Clock Gating Control 00000000h R/W SATA Clock General Configuration 00000000h R/W, R/WO 00h R/W A4h STRD SATA Indexed Register Data XXXXXXXXh R/W A8h-ABh SATACR0 SATA Capability Register 0 0010B012h RO, R/WO ACh-AFh SATACR1 SATA Capability Register 1 00000048h RO B0h-B1h FLRCID FLR Capability ID 0009h RO B2h-B3h FLRCLV FLR Capability Length and Version See register description R/WO, RO B4h-B5h FLRCTRL 0000h RO, R/W FLR Control C0h ATC APM Trapping Control 00h R/W C4h ATS ATM Trapping Status 00h R/WC D0h-D3h SP Scratch Pad 00000000h R/W E0h-E3h BFCS BIST FIS Control/Status 00000000h R/W, R/WC E4h-E7h BFTD1 BIST FIS Transmit Data, DW1 00000000h R/W E8h-EBh BFTD2 BIST FIS Transmit Data, DW2 00000000h R/W NOTE: The PCH SATA controller is not arbitrated as a PCI device, therefore it does not need a master latency timer. 572 Datasheet SATA Controller Registers (D31:F2) 14.1.1 VID--Vendor Identification Register (SATA--D31:F2) Offset Address: 00h-01h Default Value: 8086h Lockable: No Bit 15:0 14.1.2 Attribute: Size: Power Well: Description Vendor ID--RO. This is a 16-bit value assigned to Intel. Intel VID = 8086h DID--Device Identification Register (SATA--D31:F2) Offset Address: 02h-03h Default Value: See bit description Lockable: No Bit 15:0 14.1.3 RO 16 bit Core Attribute: Size: Power Well: RO 16 bit Core Description Device ID--RO. This is a 16-bit value assigned to the PCH SATA controller. NOTE: The value of this field will change dependent upon the value of the MAP Register. See Section 14.1.34 PCICMD--PCI Command Register (SATA-D31:F2) Address Offset: 04h-05h Default Value: 0000h Bit 15:11 Attribute: Size: RO, R/W 16 bits Description Reserved Interrupt Disable--R/W. This disables pin-based INTx# interrupts. This bit has no effect on MSI operation. 10 0 = Internal INTx# messages are generated if there is an interrupt and MSI is not enabled. 1 = Internal INTx# messages will not be generated. 9 Fast Back to Back Enable (FBE)--RO. Reserved as 0. 8 SERR# Enable (SERR_EN)--RO. Reserved as 0. 7 Wait Cycle Control (WCC)--RO. Reserved as 0. Parity Error Response (PER)--R/W. 6 0 = Disabled. SATA controller will not generate PERR# when a data parity error is detected. 1 = Enabled. SATA controller will generate PERR# when a data parity error is detected. 5 VGA Palette Snoop (VPS)--RO. Reserved as 0. 4 Postable Memory Write Enable (PMWE)--RO. Reserved as 0. 3 Special Cycle Enable (SCE)--RO. Reserved as 0. 2 Bus Master Enable (BME)--R/W. This bit controls the PCH's ability to act as a PCI master for IDE Bus Master transfers. This bit does not impact the generation of completions for split transaction commands. 1 Memory Space Enable (MSE)--R/W / RO. Controls access to the SATA controller's target memory space (for AHCI). This bit is RO 0 when not in AHCI/RAID modes. I/O Space Enable (IOSE)--R/W. This bit controls access to the I/O space registers. 0 Datasheet 0 = Disables access to the Legacy or Native IDE ports (both Primary and Secondary) as well as the Bus Master I/O registers. 1 = Enable. Note that the Base Address register for the Bus Master registers should be programmed before this bit is set. 573 SATA Controller Registers (D31:F2) 14.1.4 PCISTS--PCI Status Register (SATA-D31:F2) Address Offset: 06h-07h Default Value: 02B0h Note: Attribute: Size: R/WC, RO 16 bits For the writable bits, software must write a 1 to clear bits that are set. Writing a 0 to the bit has no effect. Bit Description Detected Parity Error (DPE)--R/WC. 15 0 = No parity error detected by SATA controller. 1 = SATA controller detects a parity error on its interface. 14 Signaled System Error (SSE)--RO. Reserved as 0. Received Master Abort (RMA)--R/WC. 13 0 = Master abort Not generated. 1 = SATA controller, as a master, generated a master abort. 12 Reserved as 0--RO. 11 Signaled Target Abort (STA)--RO. Reserved as 0. 10:9 DEVSEL# Timing Status (DEV_STS)--RO. 01 = Hardwired; Controls the device select time for the SATA controller's PCI interface. 8 Data Parity Error Detected (DPED)--R/WC. For PCH, this bit can only be set on read completions received from the bus when there is a parity error. 1 = SATA controller, as a master, either detects a parity error or sees the parity error line asserted, and the parity error response bit (bit 6 of the command register) is set. 7 Fast Back to Back Capable (FB2BC)--RO. Reserved as 1. 6 User Definable Features (UDF)--RO. Reserved as 0. 5 66MHz Capable (66MHZ_CAP)--RO. Reserved as 1. 4 Capabilities List (CAP_LIST)--RO. This bit indicates the presence of a capabilities list. The minimum requirement for the capabilities list must be PCI power management for the SATA controller. Interrupt Status (INTS)--RO. Reflects the state of INTx# messages, IRQ14 or IRQ15. 3 2:0 574 0 = Interrupt is cleared (independent of the state of Interrupt Disable bit in the command register [offset 04h]). 1 = Interrupt is to be asserted Reserved Datasheet SATA Controller Registers (D31:F2) 14.1.5 RID--Revision Identification Register (SATA--D31:F2) Offset Address: 08h Default Value: See bit description Bit 7:0 Attribute: Size: RO 8 bits Description Revision ID--RO. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Revision ID Register 14.1.6 PI--Programming Interface Register (SATA-D31:F2) 14.1.6.1 When Sub Class Code Register (D31:F2:Offset 0Ah) = 01h Address Offset: 09h Default Value: See bit description Bit 7 6:4 Attribute: Size: R/W, RO 8 bits Description This read-only bit is a 1 to indicate that the PCH supports bus master operation Reserved. Will always return 0. Secondary Mode Native Capable (SNC)--RO. 3 0 = Secondary controller only supports legacy mode. 1 = Secondary controller supports both legacy and native modes. When MAP.MV (D31:F2:Offset 90:bits 1:0) is any value other than 00b, this bit reports as a 0. When MAP.MV is 00b, this bit reports as a 1. Secondary Mode Native Enable (SNE)--R/W. Determines the mode that the secondary channel is operating in. 0 = Secondary controller operating in legacy (compatibility) mode 1 = Secondary controller operating in native PCI mode. 2 When MAP.MV (D31:F2:Offset 90:bits 1:0) is any value other than 00b, this bit is readonly (RO). When MAP.MV is 00b, this bit is read/write (R/W). If this bit is set by software, then the PNE bit (bit 0 of this register) must also be set by software. While in theory these bits can be programmed separately, such a configuration is not supported by hardware. Primary Mode Native Capable (PNC)--RO. 1 0 = Primary controller only supports legacy mode. 1 = Primary controller supports both legacy and native modes. When MAP.MV (D31:F2:Offset 90:bits 1:0) is any value other than 00b, this bit reports as a 0. When MAP.MV is 00b, this bit reports as a 1. Primary Mode Native Enable (PNE)--R/W. Determines the mode that the primary channel is operating in. 0 0 = Primary controller operating in legacy (compatibility) mode. 1 = Primary controller operating in native PCI mode. If this bit is set by software, then the SNE bit (bit 2 of this register) must also be set by software simultaneously. Datasheet 575 SATA Controller Registers (D31:F2) 14.1.6.2 When Sub Class Code Register (D31:F2:Offset 0Ah) = 04h Address Offset: 09h Default Value: 00h Attribute: Size: Bit 7:0 14.1.6.3 Description Interface (IF)--RO. When configured as RAID, this register becomes read only 0. When Sub Class Code Register (D31:F2:Offset 0Ah) = 06h Address Offset: 09h Default Value: 01h Attribute: Size: Bit 7:0 14.1.7 RO 8 bits RO 8 bits Description Interface (IF)--RO. Indicates the SATA Controller supports AHCI, rev 1.2. SCC--Sub Class Code Register (SATA-D31:F2) Address Offset: 0Ah Default Value: See bit description Bit Attribute: Size: RO 8 bits Description Sub Class Code (SCC) This field specifies the sub-class code of the controller, per the table below: PCH Only: SCC Register Attribute SCC Register Value RO 01h (IDE Controller) PCH Mobile Only: 7:0 MAP.SMS (D31:F2:Offset 90h:bit 7:6) SCC Register Value 00b 01h (IDE Controller) 01b 06h (AHCI Controller) Intel(R) Rapid Storage Technology Enabled PCH components Only: MAP.SMS (D31:F2:Offset 90h:bit 7:6) 576 SCC Default Register Value 00b 01h (IDE Controller) 01b 06h (AHCI Controller) 10b 04h (RAID Controller) Datasheet SATA Controller Registers (D31:F2) 14.1.8 BCC--Base Class Code Register (SATA-D31:F2SATA-D31:F2) Address Offset: 0Bh Default Value: 01h Attribute: Size: Bit 7:0 14.1.9 RO 8 bits Description Base Class Code (BCC)--RO. 01h = Mass storage device PMLT--Primary Master Latency Timer Register (SATA-D31:F2) Address Offset: 0Dh Default Value: 00h Attribute: Size: Bit RO 8 bits Description Master Latency Timer Count (MLTC)--RO. 7:0 14.1.10 00h = Hardwired. The SATA controller is implemented internally, and is not arbitrated as a PCI device, so it does not need a Master Latency Timer. HTYPE--Header Type Register (SATA-D31:F2) Address Offset: 0Eh Default Value: 00h Attribute: Size: Bit 7 6:0 14.1.11 RO 8 bits Description Multi-function Device (MFD)--RO. Indicates this SATA controller is not part of a multifunction device. Header Layout (HL)--RO. Indicates that the SATA controller uses a target device layout. PCMD_BAR--Primary Command Block Base Address Register (SATA-D31:F2) Address Offset: 10h-13h Default Value: 00000001h Attribute: Size: R/W, RO 32 bits . Bit 31:16 15:3 2:1 0 Description Reserved Base Address--R/W. This field provides the base address of the I/O space (8 consecutive I/O locations). Reserved Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate a request for I/O space. NOTE: This 8-byte I/O space is used in native mode for the Primary Controller's Command Block. Datasheet 577 SATA Controller Registers (D31:F2) 14.1.12 PCNL_BAR--Primary Control Block Base Address Register (SATA-D31:F2) Address Offset: 14h-17h Default Value: 00000001h Attribute: Size: R/W, RO 32 bits . Bit 31:16 15:2 Description Reserved Base Address--R/W. This field provides the base address of the I/O space (4 consecutive I/O locations). 1 Reserved 0 Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate a request for I/O space. NOTE: This 4-byte I/O space is used in native mode for the Primary Controller's Command Block. 14.1.13 SCMD_BAR--Secondary Command Block Base Address Register (IDE D31:F2) Address Offset: 18h-1Bh Default Value: 00000001h Bit 31:16 15:3 2:1 0 Attribute: Size: R/W, RO 32 bits Description Reserved Base Address--R/W. This field provides the base address of the I/O space (8 consecutive I/O locations). Reserved Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate a request for I/O space. NOTE: This 4-byte I/O space is used in native mode for the Secondary Controller's Command Block. 14.1.14 SCNL_BAR--Secondary Control Block Base Address Register (IDE D31:F2) Address Offset: 1Ch-1Fh Default Value: 00000001h Bit 31:16 15:2 Attribute: Size: R/W, RO 32 bits Description Reserved Base Address--R/W. This field provides the base address of the I/O space (4 consecutive I/O locations). 1 Reserved 0 Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate a request for I/O space. NOTE: This 4-byte I/O space is used in native mode for the Secondary Controller Command Block. 578 Datasheet SATA Controller Registers (D31:F2) 14.1.15 BAR--Legacy Bus Master Base Address Register (SATA-D31:F2) Address Offset: 20h-23h Default Value: 00000001h Attribute: Size: R/W, RO 32 bits The Bus Master IDE interface function uses Base Address register 5 to request a 16byte I/O space to provide a software interface to the Bus Master functions. Only 12 bytes are actually used (6 bytes for primary, 6 bytes for secondary). Only bits [15:4] are used to decode the address. Bit 31:16 15:5 4 3:1 0 14.1.16 Description Reserved Base Address--R/W. This field provides the base address of the I/O space (16 consecutive I/O locations). Base--R/W / RO. When SCC is 01h, this bit will be R/W resulting in requesting 16B of I/ O space. When SCC is not 01h, this bit will be Read Only 0, resulting in requesting 32B of I/O space. Reserved Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate a request for I/O space. ABAR/SIDPBA1--AHCI Base Address Register/Serial ATA Index Data Pair Base Address (SATA-D31:F2) When the programming interface is not IDE (that is, SCC is not 01h), this register is named ABAR. When the programming interface is IDE, this register becomes SIDPBA. Note that hardware does not clear those BA bits when switching from IDE component to non-IDE component or vice versa. BIOS is responsible for clearing those bits to 0 since the number of writable bits changes after component switching (as indicated by a change in SCC). In the case, this register will then have to be re-programmed to a proper value. 14.1.16.1 When SCC is not 01h When the programming interface is not IDE, the register represents a memory BAR allocating space for the AHCI memory registers defined in Section 14.4. . Address Offset: 24-27h Attribute: R/W, RO Default Value: 00000000h Size: 32 bits Bit 31:11 10:4 3 2:1 0 Description Base Address (BA)--R/W. Base address of register memory space (aligned to 1 KB) Reserved Prefetchable (PF)--RO. Indicates that this range is not pre-fetchable Type (TP)--RO. Indicates that this range can be mapped anywhere in 32-bit address space. Resource Type Indicator (RTE)--RO. Hardwired to 0 to indicate a request for register memory space. NOTE: 1. The ABAR register must be set to a value of 0001_0000h or greater. Datasheet 579 SATA Controller Registers (D31:F2) 14.1.16.2 When SCC is 01h When the programming interface is IDE, the register becomes an I/O BAR allocating 16 bytes of I/O space for the I/O-mapped registers defined in Section 14.2. Note that although 16 bytes of locations are allocated, only 8 bytes are used as SINDX and SDATA registers; with the remaining 8 bytes preserved for future enhancement. Address Offset: 24h-27h Default Value: 00000001h Bit 31:16 15:4 3:1 0 14.1.17 Reserved Base Address (BA)--R/W. Base address of the I/O space. Reserved Resource Type Indicator (RTE)--RO. Indicates a request for I/O space. SVID--Subsystem Vendor Identification Register (SATA-D31:F2) R/WO 16 bits Core Description 15:0 Subsystem Vendor ID (SVID)--R/WO. Value is written by BIOS. No hardware action taken on this value. SID--Subsystem Identification Register (SATA-D31:F2) Attribute: Size: Power Well: R/WO 16 bits Core Bit Description 15:0 Subsystem ID (SID)--R/WO. Value is written by BIOS. No hardware action taken on this value. CAP--Capabilities Pointer Register (SATA-D31:F2) Address Offset: 34h Default Value: 80h 580 Attribute: Size: Power Well: Bit Address Offset: 2Eh-2Fh Default Value: 0000h Lockable: No Function Level Reset: No 14.1.19 R/WO 32 bits Description Address Offset: 2Ch-2Dh Default Value: 0000h Lockable: No Function Level Reset: No 14.1.18 Attribute: Size: Attribute: Size: RO 8 bits Bit Description 7:0 Capabilities Pointer (CAP_PTR)--RO. Indicates that the first capability pointer offset is 80h. This value changes to 70h if the Sub Class Code (SCC) (Dev 31:F2:0Ah) is configure as IDE mode (value of 01). Datasheet SATA Controller Registers (D31:F2) 14.1.20 INT_LN--Interrupt Line Register (SATA-D31:F2) Address Offset: Default Value: Function Level Reset: 3Ch 00h No Bit 7:0 Attribute: Size: R/W 8 bits Description Interrupt Line--R/W. This field is used to communicate to software the interrupt line that the interrupt pin is connected to. Interrupt Line register is not reset by FLR. 14.1.21 INT_PN--Interrupt Pin Register (SATA-D31:F2) Address Offset: 3Dh Default Value: See Register Description Bit 7:0 14.1.22 RO 8 bits Description Interrupt Pin--RO. This reflects the value of D31IP.SIP (Chipset Config Registers:Offset 3100h:bits 11:8). IDE_TIM--IDE Timing Register (SATA-D31:F2) Address Offset: Primary: 40h-41h Secondary: 42h-43h Default Value: 0000h Note: Attribute: Size: Attribute: R/W Size: 16 bits Bits 14:12 and 9:0 of this register are R/W to maintain software compatibility. These bits have no effect on hardware. Bit Description IDE Decode Enable (IDE)--R/W. Individually enable/disable the Primary or Secondary decode. 15 0 = Disable. 1 = Enables the PCH to decode the associated Command Block (1F0-1F7h for primary, 170-177h for secondary, or their native mode BAR equivalents) and Control Block (3F6h for primary, 376h for secondary, or their native mode BAR equivalents). This bit effects the IDE decode ranges for both legacy and native-Mode decoding. 14:12 IDE_TIM Field 2--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 11:10 Reserved 9:0 Datasheet IDE_TIM Field 1--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 581 SATA Controller Registers (D31:F2) 14.1.23 SIDETIM--Slave IDE Timing Register (SATA-D31:F2) Address Offset: 44h Default Value: 00h Note: 14.1.24 Bit Description 7:0 SIDETIM Field 1--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. SDMA_CNT--Synchronous DMA Control Register (SATA-D31:F2) 7:4 Reserved 3:0 SDMA_CNT Field 1--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. SDMA_TIM--Synchronous DMA Timing Register (SATA-D31:F2) Attribute: Size: R/W 16 bits This register is R/W to maintain software compatibility. These bits have no effect on hardware. Bit 582 R/W 8 bits Description Address Offset: 4Ah-4Bh Default Value: 0000h Note: Attribute: Size: This register is R/W to maintain software compatibility. These bits have no effect on hardware. Bit 14.1.25 R/W 8 bits This register is R/W to maintain software compatibility. These bits have no effect on hardware. Address Offset: 48h Default Value: 00h Note: Attribute: Size: Description 15:14 Reserved 13:12 SDMA_TIM Field 4--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 11:10 Reserved 9:8 SDMA_TIM Field 3--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 7:6 Reserved 5:4 SDMA_TIM Field 2--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 3:2 Reserved 1:0 SDMA_TIM Field 1--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. Datasheet SATA Controller Registers (D31:F2) 14.1.26 IDE_CONFIG--IDE I/O Configuration Register (SATA-D31:F2) Address Offset: 54h-57h Default Value: 00000000h Note: R/W 32 bits This register is R/W to maintain software compatibility. These bits have no effect on hardware. Bit Description 31:24 Reserved 23:12 IDE_CONFIG Field 2--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 11:8 7:0 14.1.27 Attribute: Size: Reserved IDE_CONFIG Field 1--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. PID--PCI Power Management Capability Identification Register (SATA-D31:F2) Address Offset: 70h-71h Default Value: XX01h Bits Attribute: Size: RO 16 bits Description Next Capability (NEXT)--RO. 15:8 B0h--if SCC = 01h (IDE mode) indicating next item is FLR capability pointer. A8h--for all other values of SCC to point to the next capability structure. 7:0 Datasheet Capability ID (CID)--RO. Indicates that this pointer is a PCI power management. 583 SATA Controller Registers (D31:F2) 14.1.28 PC--PCI Power Management Capabilities Register (SATA-D31:F2) Address Offset: 72h-73h Default Value: x003h Attribute: Size: RO 16 bits f Bits Description PME Support (PME_SUP)--RO. 15:11 01000 = If SCC is not 01h, in a non-IDE mode, indicates PME# can be generated from the D3HOT state in the SATA host controller. 10 D2 Support (D2_SUP)--RO. Hardwired to 0. The D2 state is not supported 9 D1 Support (D1_SUP)--RO. Hardwired to 0. The D1 state is not supported 8:6 584 00000 = If SCC = 01h, indicates no PME support in IDE mode. Auxiliary Current (AUX_CUR)--RO. PME# from D3COLD state is not supported, therefore this field is 000b. 5 Device Specific Initialization (DSI)--RO. Hardwired to 0 to indicate that no devicespecific initialization is required. 4 Reserved 3 PME Clock (PME_CLK)--RO. Hardwired to 0 to indicate that PCI clock is not required to generate PME#. 2:0 Version (VER)--RO. Hardwired to 011 to indicates support for Revision 1.2 of the PCI Power Management Specification. Datasheet SATA Controller Registers (D31:F2) 14.1.29 PMCS--PCI Power Management Control and Status Register (SATA-D31:F2) Address Offset: Default Value: Function Level Reset: 74h-75h xx08h No (Bits 8 and 15) Bits Attribute: Size: R/W, R/WC 16 bits Description PME Status (PMES)--R/WC. Bit is set when a PME event is to be requested, and if this bit and PMEE is set, a PME# will be generated from the SATA controller 15 NOTE: Whenever SCC = 01h, hardware will automatically change the attribute of this bit to RO 0. Software is advised to clear PMEE and PMES together prior to changing SCC thru MAP.SMS. This bit is not reset by Function Level Reset. 14:9 Reserved PME Enable (PMEE)--R/W. When set, the SATA controller generates PME# form D3HOT on a wake event. 8 NOTE: Whenever SCCSCC = 01h, hardware will automatically change the attribute of this bit to RO 0. Software is advised to clear PMEE and PMES together prior to changing SCC thru MAP.SMS. This bit is not reset by Function Level Reset. 7:4 Reserved No Soft Reset (NSFRST)--RO. These bits are used to indicate whether devices transitioning from D3HOT state to D0 state will perform an internal reset. 0 = Device transitioning from D3HOT state to D0 state perform an internal reset. 1 = Device transitioning from D3HOT state to D0 state do not perform an internal reset. 3 Configuration content is preserved. Upon transition from the D3HOT state to D0 state initialized state, no additional operating system intervention is required to preserve configuration context beyond writing to the PowerState bits. Regardless of this bit, the controller transition from D3HOT state to D0 state by a system or bus segment reset will return to the state D0 uninitialized with only PME context preserved if PME is supported and enabled. 2 Reserved Power State (PS)--R/W. These bits are used both to determine the current power state of the SATA controller and to set a new power state. 1:0 00 = D0 state 11 = D3HOT state When in the D3HOT state, the controller's configuration space is available, but the I/O and memory spaces are not. Additionally, interrupts are blocked. Datasheet 585 SATA Controller Registers (D31:F2) 14.1.30 MSICI--Message Signaled Interrupt Capability Identification Register (SATA-D31:F2) Address Offset: 80h-81h Default Value: 7005h Note: 15:8 7:0 Description Next Pointer (NEXT)--RO. Indicates the next item in the list is the PCI power management pointer. Capability ID (CID)--RO. Capabilities ID indicates MSI. MSIMC--Message Signaled Interrupt Message Control Register (SATA-D31:F2) Address Offset: 82h-83h Default Value: 0000h Note: Attribute: Size: R/W, RO 16 bits There is no support for MSI when the software is operating in legacy (IDE) mode when AHCI is not enabled. Prior to switching from AHCI to IDE mode, software must make sure that MSI is disabled. Bits 15:8 7 586 RO 16 bits There is no support for MSI when the software is operating in legacy (IDE) mode when AHCI is not enabled. Prior to switching from AHCI to IDE mode, software must make sure that MSI is disabled. Bits 14.1.31 Attribute: Size: Description Reserved 64 Bit Address Capable (C64)--RO. Capable of generating a 32-bit message only. Datasheet SATA Controller Registers (D31:F2) Bits Description Multiple Message Enable (MME)--R/W. = 000 (and MSIE is set), a single MSI message will be generated for all SATA ports, and bits [15:0] of the message vector will be driven from MD[15:0]. For 6 port components: MME Value Driven on MSI Memory Write Bits[15:3] Bit[2] Bit[1] Bit[0] MD[15:3] MD[2] MD[1] MD[0] 000, 001, 010 100 6:4 MD[15:3] Port Port Port Port Port Port 0: 1: 2: 3: 4: 5: 0 0 0 0 1 1 Port Port Port Port Port Port 0: 1: 2: 3: 4: 5: 0 0 1 1 0 0 Port Port Port Port Port Port 0: 1: 2: 3: 4: 5: 0 1 0 1 0 1 For 4 port components: MME Value Driven on MSI Memory Write Bits[15:3] Bit[2] Bit[1] Bit[0] MD[15:3] MD[2] MD[1] MD[0] 000, 001, 010 100 MD[15:3] Port Port Port Port 0: 1: 4: 5: 0 0 1 1 Port Port Port Port 0: 1: 2: 3: 0 0 0 0 Port Port Port Port 0: 1: 2: 3: 0 1 0 1 Values `011b' to `111b' are reserved. If this field is set to one of these reserved values, the results are undefined. NOTE: The CCC interrupt is generated on unimplemented port (AHCI PI register bit equal to 0). If CCC interrupt is disabled, no MSI shall be generated for the port dedicated to the CCC interrupt. When CCC interrupt occurs, MD[2:0] is dependant on CCC_CTL.INT (in addition to MME). 3:1 Multiple Message Capable (MMC)--RO. Indicates the number of interrupt messages supported by the PCH SATA controller. 000 = 1 MSI Capable (When SCC bit is set to 01h. MSI is not supported in IDE mode) 100 = 8 MSI Capable MSI Enable (MSIE)--R/W /RO. If set, MSI is enabled and traditional interrupt pins are not used to generate interrupts. This bit is RW when SC.SCC is not 01h and is read-only 0 when SCC is 01h. Note that CMD.ID bit has no effect on MSI. 0 NOTE: Software must clear this bit to 0 to disable MSI first before changing the number of messages allocated in the MMC field. Software must also make sure this bit is cleared to `0' when operating in legacy mode (when GHC.AE = 0). Datasheet 587 SATA Controller Registers (D31:F2) 14.1.32 MSIMA--Message Signaled Interrupt Message Address Register (SATA-D31:F2) Address Offset: 84h-87h Default Value: 00000000h Note: 31:2 1:0 Description Address (ADDR)--R/W. Lower 32 bits of the system specified message address, always DWORD aligned. Reserved MSIMD--Message Signaled Interrupt Message Data Register (SATA-D31:F2) Address Offset: 88h-89h Default Value: 0000h Note: 588 R/W 32 bits There is no support for MSI when the software is operating in legacy (IDE) mode when AHCI is not enabled. Prior to switching from AHCI to IDE mode, software must make sure that MSI is disabled. Bits 14.1.33 Attribute: Size: Attribute: Size: R/W 16 bits There is no support for MSI when the software is operating in legacy (IDE) mode when AHCI is not enabled. Prior to switching from AHCI to IDE mode, software must make sure that MSI is disabled. Bits Description 15:0 Data (DATA)--R/W. This 16-bit field is programmed by system software if MSI is enabled. Its content is driven onto the lower word of the data bus of the MSI memory write transaction. Note that when the MME field is set to `001' or `010', bit [0] and bits [1:0] respectively of the MSI memory write transaction will be driven based on the source of the interrupt rather than from MD[2:0]. See the description of the MME field. Datasheet SATA Controller Registers (D31:F2) 14.1.34 MAP--Address Map Register (SATA-D31:F2) Address Offset: Default Value: Function Level Reset: 90h Attribute: 0000h Size: No (Bits 7:5 and 13:8 only) Bits 15:8 R/W, R/WO 16 bits Description Reserved SATA Mode Select (SMS)--R/W. Software programs these bits to control the mode in which the SATA Controller should operate: 7:6 00b = IDE mode 01b = AHCI mode 10b = RAID mode 11b = Reserved NOTES: 1. The SATA Function Device ID will change based on the value of this register. 2. When switching from AHCI or RAID mode to IDE mode, a 2 port SATA controller (Device 31, Function 5) will be enabled. 3. AHCI mode may only be selected when MV = 00 4. RAID mode may only be selected when MV = 00 5. Programming these bits with values that are invalid (such as, selecting RAID when in combined mode) will result in indeterministic behavior by the HW 6. SW shall not manipulate SMS during runtime operation; that is, the OS will not do this. The BIOS may choose to switch from one mode to another during POST. These bits are not reset by Function Level Reset. SATA Port-to-Controller Configuration (SC)--R/W. This bit changes the number of SATA ports available within each SATA Controller. 5 0 = Up to 4 SATA ports are available for Controller 1 (Device 31 Function 2) with ports [3:0] and up to 2 SATA ports are available for Controller 2 (Device 31 Function 5) with ports [5:4]. 1 = Up to 6 SATA ports are available for Controller 1 (Device 31 Function 2) with ports [5:0] and no SATA ports are available for Controller 2 (Device 31 Function 5). NOTE: This bit should be set to 1 in AHCI/RAID mode. This bit is not reset by Function Level Reset. Datasheet 4:2 Reserved 1:0 Map Value (MV)--RO. Reserved 589 SATA Controller Registers (D31:F2) 14.1.35 PCS--Port Control and Status Register (SATA-D31:F2) Address Offset: 92h-93h Default Value: 0000h Function Level Reset: No Attribute: Size: R/W, RO 16 bits By default, the SATA ports are set to the disabled state (bits [5:0] = 0). When enabled by software, the ports can transition between the on, partial, and slumber states and can detect devices. When disabled, the port is in the "off" state and cannot detect any devices. If an AHCI-aware or RAID enabled operating system is being booted, then system BIOS shall insure that all supported SATA ports are enabled prior to passing control to the OS. Once the AHCI aware OS is booted it becomes the enabling/disabling policy owner for the individual SATA ports. This is accomplished by manipulating a port's PxSCTL and PxCMD fields. Because an AHCI or RAID aware OS will typically not have knowledge of the PxE bits and because the PxE bits act as master on/off switches for the ports, preboot software must insure that these bits are set to 1 prior to booting the OS, regardless as to whether or not a device is currently on the port. Bits Description OOB Retry Mode (ORM)--RW. 15 0 = The SATA controller will not retry after an OOB failure 1 = The SATA controller will continue to retry after an OOB failure until successful (infinite retry) 14 Reserved 13 Port 5 Present (P5P)--RO. The status of this bit may change at any time. This bit is cleared when the port is disabled using P5E. This bit is not cleared upon surprise removal of a device. 0 = No device detected. 1 = The presence of a device on Port 5 has been detected. 12 Port 4 Present (P4P)--RO. The status of this bit may change at any time. This bit is cleared when the port is disabled using P4E. This bit is not cleared upon surprise removal of a device. 0 = No device detected. 1 = The presence of a device on Port 4 has been detected. Port 3 Present (P3P)--RO. The status of this bit may change at any time. This bit is cleared when the port is disabled using P3E. This bit is not cleared upon surprise 11 (Desktop removal of a device. Only) 0 = No device detected. 1 = The presence of a device on Port 3 has been detected. Port 2 Present (P2P)--RO. The status of this bit may change at any time. This bit is cleared when the port is disabled using P2E. This bit is not cleared upon surprise 10 (Desktop removal of a device. Only) 0 = No device detected. 1 = The presence of a device on Port 2 has been detected. 11:10 (Mobile Only) 9 Reserved Port 1 Present (P1P)--RO. The status of this bit may change at any time. This bit is cleared when the port is disabled using P1E. This bit is not cleared upon surprise removal of a device. 0 = No device detected. 1 = The presence of a device on Port 1 has been detected. 590 Datasheet SATA Controller Registers (D31:F2) Bits Description 8 Port 0 Present (P0P)--RO. The status of this bit may change at any time. This bit is cleared when the port is disabled using P0E. This bit is not cleared upon surprise removal of a device. 0 = No device detected. 1 = The presence of a device on Port 0 has been detected. 7:6 Reserved Port 5 Enabled (P5E)--R/W. 5 0 = Disabled. The port is in the `off' state and cannot detect any devices. 1 = Enabled. The port can transition between the on, partial, and slumber states and can detect devices. NOTE: This bit takes precedence over P5CMD.SUD (offset ABAR+298h:bit 1) If MAP.SC is 0, if SCC is 01h, this bit will be read only 0 or if MAP.SPD[5] is 1. Port 4 Enabled (P4E)--R/W. 4 0 = Disabled. The port is in the `off' state and cannot detect any devices. 1 = Enabled. The port can transition between the on, partial, and slumber states and can detect devices. NOTE: This bit takes precedence over P4CMD.SUD (offset ABAR+298h:bit 1) If MAP.SC is 0, if SCC is 01h, this bit will be read only 0 or if MAP.SPD[4] is 1. Port 3 Enabled (P3E)--R/W. 0 = Disabled. The port is in the `off' state and cannot detect any devices. 3 1 = Enabled. The port can transition between the on, partial, and slumber states and (Desktop can detect devices. Only) NOTE: This bit takes precedence over P3CMD.SUD (offset ABAR+298h:bit 1). When MAP.SPD[3] is 1 this is reserved and is read-only 0. Port 2 Enabled (P2E)--R/W. 0 = Disabled. The port is in the `off' state and cannot detect any devices. 2 1 = Enabled. The port can transition between the on, partial, and slumber states and (Desktop can detect devices. Only) NOTE: This bit takes precedence over P2CMD.SUD (offset ABAR+218h:bit 1). When MAP.SPD[2] is 1 this is reserved and is read-only 0. 3:2 (Mobile Only) Reserved Port 1 Enabled (P1E)--R/W. 1 0 = Disabled. The port is in the `off' state and cannot detect any devices. 1 = Enabled. The port can transition between the on, partial, and slumber states and can detect devices. NOTE: This bit takes precedence over P1CMD.SUD (offset ABAR+198h:bit 1). When MAP.SPD[1] is 1 this is reserved and is read-only 0. Port 0 Enabled (P0E)--R/W. 0 Datasheet 0 = Disabled. The port is in the `off' state and cannot detect any devices. 1 = Enabled. The port can transition between the on, partial, and slumber states and can detect devices. NOTE: This bit takes precedence over P0CMD.SUD (offset ABAR+118h:bit 1). When MAP.SPD[0] is 1 this is reserved and is read-only 0. 591 SATA Controller Registers (D31:F2) 14.1.36 SCLKCG--SATA Clock Gating Control Register Address Offset: 94h-97h Default Value: 00000000h Attribute: Size: R/W 32 bits . Bit 31:30 Description Reserved Port Clock Disable (PCD)--R/W. 0 = All clocks to the associated port logic will operate normally. 1 = The backbone clock driven to the associated port logic is gated and will not toggle. Bit 29: Port 5 Bit 28: Port 4 29:24 Bit 27: Port 3 BIt 26: Port 2 Bit 25: Port 1 Bit 24: Port 0 If a port is not available, software shall set the corresponding bit to 1. Software can also set the corresponding bits to 1 on ports that are disabled. Software cannot set the PCD [port x]=1 if the corresponding PCS.PxE=1 in either Dev31Func2 or Dev31Func5 (dual controller IDE mode) or AHCI GHC.PI[x] = "1". 23:9 8:0 592 Reserved SCLKCG Field 1--R/W. BIOS must program these bits to 183h. Datasheet SATA Controller Registers (D31:F2) 14.1.37 SCLKGC--SATA Clock General Configuration Register Address Offset: Default Value: Function Level Reset: Bit Attribute: Size: R/W, R/WO 32 bits Description 31:8 Reserved 7 (non-RAID Capable SKUs Only) Reserved 7 (Raid Capable SKUs Only) 9Ch-9Fh 00000000h No Alternate ID Enable (AIE)--R/WO. 0 = When in RAID mode the SATA Controller located at Device 31: Function 2 will report the Device ID 2822h for Desktop or 282Ah for Mobile and the Microsoft Windows Vista* and Windows* 7 in-box version of the Intel(R) Rapid Storage Manager will load on the platform. 1 = When in RAID mode the SATA Controller located at Device 31: Function 2 will report the Device ID 3B25h for Desktop RAID 0/1/5/10, 3B2Ch for Mobile to prevent the Microsoft Windows Vista or Windows 7 in-box version of the Intel(R) Rapid Storage Manager from loading on the platform and will require the user to perform an `F6' installation of the appropriate Intel(R) Rapid Storage Manager. NOTE: This field is applicable when the AHCI is configured for RAID mode of operation. It has no impact for AHCI and IDE modes of operation. BIOS is recommended to program this bit prior to programming the MAP.SMS field to reflect RAID. This field is reset by PLTRST#. BIOS is required to reprogram the value of this bit after resuming from S3, S4 and S5. 6:2 Reserved SATA2-port Configuration Indicator (SATA2PIND)--RO. 1 0 = Normal configuration. 1 = One IDE Controller is implemented supporting only two ports for a Primary Master and a Secondary Master. NOTE: When set, BIOS must ensure that bit 2 and bit 3 of the AHCI PI registers are zeros. BIOS must also make sure that Port 2 and Port 3 are disabled (using PCS configuration register) and the port clocks are gated (using SCLKCG configuration register). SATA4-port All Master Configuration Indicator (SATA4PMIND)--RO. 0 Datasheet 0 = Normal configuration. 1 = Two IDE Controllers are implemented, each supporting two ports for a Primary Master and a Secondary Master. NOTE: When set, BIOS must ensure that bit 2 and bit 3 of the AHCI PI registers are zeros. BIOS must also make sure that Port 2 and Port 3 are disabled (using PCS configuration register) and the port clocks are gated (using SCLKCG configuration register). 593 SATA Controller Registers (D31:F2) 14.1.38 SIRI--SATA Indexed Registers Index Register Address Offset: A0h Default Value: 00h Attribute: Size: R/W 8 bits . Bit 14.1.39 Description 7:2 Index (IDX)--R/W. This field is a 5-bit index pointer into the SATA Indexed Register space. Data is written into and read from the SIRD register (D31:F2:A4h). 1:0 Reserved FLRCID--FLR Capability ID Register (SATA-D31:F2) Address Offset: B0-B1h Default Value: 0009h Bit 15:8 Attribute: Size: RO 16 bits Description Next Capability Pointer--RO. 00h indicates the final item in the capability list. Capability ID--RO. The value of this field depends on the FLRCSSEL bit. 7:0 13h = If PFLRCSSEL = 0 09h (Vendor Specific) = If PFLRCSSEL = 1 594 Datasheet SATA Controller Registers (D31:F2) 14.1.40 FLRCLV--FLR Capability Length and Version Register (SATA-D31:F2) Address Offset: B2-B3h Attribute: RO, R/WO Default Value: xx06h Size: 16 bits Function Level Reset: No (Bit 9:8 Only when FLRCSSEL = 0) When FLRCSSEL = 0, this register is defined as follows: Bit 15:10 9 Description Reserved FLR Capability--R/WO. 1 = Support for Function Level reset. This bit is not reset by the Function Level Reset. 8 7:0 TXP Capability--R/WO. 1 = Support for Transactions Pending (TXP) bit. TXP must be supported if FLR is supported. Vendor-Specific Capability ID--RO. This field indicates the # of bytes of this Vendor Specific capability as required by the PCI specification. It has the value of 06h for the FLR capability. When FLRCSSEL = 1, this register is defined as follows: Bit 15:12 11:8 7:0 14.1.41 Description Vendor-Specific Capability ID--RO. A value of 2h identifies this capability as the Function Level Reset (FLR). Capability Version--RO. This field indicates the version of the FLR capability. Vendor-Specific Capability ID--RO. This field indicates the # of bytes of this Vendor Specific capability as required by the PCI specification. It has the value of 06h for the FLR capability. FLRC--FLR Control Register (SATA-D31:F2) Address Offset: B4-B5h Default Value: 0000h Bit 15:9 Attribute: Size: RO, R/W 16 bits Description Reserved Transactions Pending (TXP)--RO. 8 0 = Controller has received all non-posted requests. 1 = Controller has issued non-posted requests which has not been completed. 7:1 0 Datasheet Reserved Initiate FLR--R/W. Used to initiate FLR transition. A write of 1 indicates FLR transition. Since hardware must no t respond to any cycles till FLR completion the value read by software from this bit is 0. 595 SATA Controller Registers (D31:F2) 14.1.42 ATC--APM Trapping Control Register (SATA-D31:F2) Address Offset: C0h Default Value: 00h Function Level Reset:No Attribute: Size: R/W 8 bits . Bit 7:4 14.1.43 Description Reserved 3 Secondary Slave Trap (SST)--R/W. Enables trapping and SMI# assertion on legacy I/O accesses to 170h-177h and 376h. The active device on the secondary interface must be device 1 for the trap and/or SMI# to occur. 2 Secondary Master Trap (SPT)--R/W. Enables trapping and SMI# assertion on legacy I/O accesses to 170h-177h and 376h. The active device on the secondary interface must be device 0 for the trap and/or SMI# to occur. 1 Primary Slave Trap (PST)--R/W. Enables trapping and SMI# assertion on legacy I/O accesses to 1F0h-1F7h and 3F6h. The active device on the primary interface must be device 1 for the trap and/or SMI# to occur. 0 Primary Master Trap (PMT)--R/W. Enables trapping and SMI# assertion on legacy I/ O accesses to 1F0h-1F7h and 3F6h. The active device on the primary interface must be device 0 for the trap and/or SMI# to occur. ATS--APM Trapping Status Register (SATA-D31:F2) Address Offset: C4h Default Value: 00h Function Level Reset: No Attribute: Size: R/WC 8 bits . Bit 7:4 14.1.44 Description Reserved 3 Secondary Slave Trap (SST)--R/WC. Indicates that a trap occurred to the secondary slave device. 2 Secondary Master Trap (SPT)--R/WC. Indicates that a trap occurred to the secondary master device. 1 Primary Slave Trap (PST)--R/WC. Indicates that a trap occurred to the primary slave device. 0 Primary Master Trap (PMT)--R/WC. Indicates that a trap occurred to the primary master device. SP Scratch Pad Register (SATA-D31:F2) Address Offset: D0h Default Value: 00000000h Attribute: Size: R/W 32 bits . 596 Bit Description 31:0 Data (DT)--R/W. This is a read/write register that is available for software to use. No hardware action is taken on this register. Datasheet SATA Controller Registers (D31:F2) 14.1.45 BFCS--BIST FIS Control/Status Register (SATA-D31:F2) Address Offset: E0h-E3h Default Value: 00000000h Bits 31:16 Attribute: Size: R/W, R/WC 32 bits Description Reserved 15 Port 5 BIST FIS Initiate (P5BFI)--R/W. When a rising edge is detected on this bit field, the PCH initiates a BIST FIS to the device on Port 5, using the parameters specified in this register and the data specified in BFTD1 and BFTD2. The BIST FIS will only be initiated if a device on Port 5 is present and ready (not partial/slumber state). After a BIST FIS is successfully completed, software must disable and reenable the port using the PxE bits at offset 92h prior to attempting additional BIST FISs or to return the PCH to a normal operational mode. If the BIST FIS fails to complete, as indicated by the BFF bit in the register, then software can clear then set the P5BFI bit to initiate another BIST FIS. This can be retried until the BIST FIS eventually completes successfully 14 Port 4 BIST FIS Initiate (P4BFI)--R/W. When a rising edge is detected on this bit field, the PCH initiates a BIST FIS to the device on Port 4, using the parameters specified in this register and the data specified in BFTD1 and BFTD2. The BIST FIS will only be initiated if a device on Port 4 is present and ready (not partial/slumber state). After a BIST FIS is successfully completed, software must disable and reenable the port using the PxE bits at offset 92h prior to attempting additional BIST FISs or to return the PCH to a normal operational mode. If the BIST FIS fails to complete, as indicated by the BFF bit in the register, then software can clear then set the P4BFI bit to initiate another BIST FIS. This can be retried until the BIST FIS eventually completes successfully Port 3 BIST FIS Initiate (P3BFI)--R/W. When a rising edge is detected on this bit field, the PCH initiates a BIST FIS to the device on Port 3, using the parameters specified in this register and the data specified in BFTD1 and BFTD2. The BIST FIS will only be initiated if a device on Port 3 is present and ready (not partial/slumber 13 state). After a BIST FIS is successfully completed, software must disable and re(Desktop enable the port using the PxE bits at offset 92h prior to attempting additional BIST Only) FISs or to return the PCH to a normal operational mode. If the BIST FIS fails to complete, as indicated by the BFF bit in the register, then software can clear then set the P3BFI bit to initiate another BIST FIS. This can be retried until the BIST FIS eventually completes successfully Port 2 BIST FIS Initiate (P2BFI)--R/W. When a rising edge is detected on this bit field, the PCH initiates a BIST FIS to the device on Port 2, using the parameters specified in this register and the data specified in BFTD1 and BFTD2. The BIST FIS will only be initiated if a device on Port 2 is present and ready (not partial/slumber 12 state). After a BIST FIS is successfully completed, software must disable and re(Desktop enable the port using the PxE bits at offset 92h prior to attempting additional BIST Only) FISes or to return the PCH to a normal operational mode. If the BIST FIS fails to complete, as indicated by the BFF bit in the register, then software can clear then set the P2BFI bit to initiate another BIST FIS. This can be retried until the BIST FIS eventually completes successfully 13:12 (Mobile Only) Datasheet Reserved 597 SATA Controller Registers (D31:F2) Bits Description BIST FIS Successful (BFS)--R/WC. 11 0 = Software clears this bit by writing a 1 to it. 1 = This bit is set any time a BIST FIS transmitted by PCH receives an R_OK completion status from the device. NOTE: This bit must be cleared by software prior to initiating a BIST FIS. BIST FIS Failed (BFF)--R/WC. 10 0 = Software clears this bit by writing a 1 to it. 1 = This bit is set any time a BIST FIS transmitted by PCH receives an R_ERR completion status from the device. NOTE: This bit must be cleared by software prior to initiating a BIST FIS. 9 Port 1 BIST FIS Initiate (P1BFI)--R/W. When a rising edge is detected on this bit field, the PCH initiates a BIST FIS to the device on Port 1, using the parameters specified in this register and the data specified in BFTD1 and BFTD2. The BIST FIS will only be initiated if a device on Port 1 is present and ready (not partial/slumber state). After a BIST FIS is successfully completed, software must disable and reenable the port using the PxE bits at offset 92h prior to attempting additional BIST FISes or to return the PCH to a normal operational mode. If the BIST FIS fails to complete, as indicated by the BFF bit in the register, then software can clear then set the P1BFI bit to initiate another BIST FIS. This can be retried until the BIST FIS eventually completes successfully. 8 Port 0 BIST FIS Initiate (P0BFI)--R/W. When a rising edge is detected on this bit field, the PCH initiates a BIST FIS to the device on Port 0, using the parameters specified in this register and the data specified in BFTD1 and BFTD2. The BIST FIS will only be initiated if a device on Port 0 is present and ready (not partial/slumber state). After a BIST FIS is successfully completed, software must disable and reenable the port using the PxE bits at offset 92h prior to attempting additional BIST FISes or to return the PCH to a normal operational mode. If the BIST FIS fails to complete, as indicated by the BFF bit in the register, then software can clear then set the P0BFI bit to initiate another BIST FIS. This can be retried until the BIST FIS eventually completes successfully. BIST FIS Parameters (BFP)--R/W. These 6 bits form the contents of the upper 6 bits of the BIST FIS Pattern Definition in any BIST FIS transmitted by the PCH. This field is not port specific--its contents will be used for any BIST FIS initiated on port 0, port 1, port 2 or port 3. The specific bit definitions are: 7:2 Bit 7: T - Far End Transmit mode Bit 6: A - Align Bypass mode Bit 5: S - Bypass Scrambling Bit 4: L - Far End Retimed Loopback Bit 3: F - Far End Analog Loopback Bit 2: P - Primitive bit for use with Transmit mode 1:0 598 Reserved Datasheet SATA Controller Registers (D31:F2) 14.1.46 BFTD1--BIST FIS Transmit Data1 Register (SATA-D31:F2) Address Offset: E4h-E7h Default Value: 00000000h 14.1.47 R/W 32 bits Bits Description 31:0 BIST FIS Transmit Data 1--R/W. The data programmed into this register will form the contents of the second DWord of any BIST FIS initiated by the PCH. This register is not port specific--its contents will be used for BIST FIS initiated on any port. Although the 2nd and 3rd DWs of the BIST FIS are only meaningful when the "T" bit of the BIST FIS is set to indicate "Far-End Transmit mode", this register's contents will be transmitted as the BIST FIS 2nd DW regardless of whether or not the "T" bit is indicated in the BFCS register (D31:F2:E0h). BFTD2--BIST FIS Transmit Data2 Register (SATA-D31:F2) Address Offset: E8h-EBh Default Value: 00000000h Datasheet Attribute: Size: Attribute: Size: R/W 32 bits Bits Description 31:0 BIST FIS Transmit Data 2--R/W. The data programmed into this register will form the contents of the third DWord of any BIST FIS initiated by the PCH. This register is not port specific--its contents will be used for BIST FIS initiated on any port. Although the 2nd and 3rd DWs of the BIST FIS are only meaningful when the "T" bit of the BIST FIS is set to indicate "Far-End Transmit mode", this register's contents will be transmitted as the BIST FIS 3rd DW regardless of whether or not the "T" bit is indicated in the BFCS register (D31:F2:E0h). 599 SATA Controller Registers (D31:F2) 14.2 Bus Master IDE I/O Registers (D31:F2) The bus master IDE function uses 16 bytes of I/O space, allocated using the BAR register, located in Device 31:Function 2 Configuration space, offset 20h. All bus master IDE I/O space registers can be accessed as byte, word, or DWord quantities. Reading reserved bits returns an indeterminate, inconsistent value, and writes to reserved bits have no affect (but should not be attempted). These registers are only used for legacy operation. Software must not use these registers when running AHCI. All I/O registers are reset by Function Level Reset. The register address I/O map is shown in Table 14-2. Table 14-2. Bus Master IDE I/O Register Address Map BAR+ Offset Mnemonic 00 BMICP 01 -- 02 BMISP 03 -- 04-07 BMIDP Bus Master IDE Descriptor Table Pointer Primary 08 BMICS Command Register Secondary 09 -- 0Ah BMISS 0Bh -- 0Ch-0F h 600 BMIDS 10h AIR 14h AIDR Register Command Register Primary Reserved Bus Master IDE Status Register Primary Reserved Reserved Bus Master IDE Status Register Secondary Reserved Default Type 00h R/W -- RO 00h R/W, R/ WC, RO -- RO xxxxxxxxh R/W 00h R/W -- RO 00h R/W, R/ WC, RO -- RO Bus Master IDE Descriptor Table Pointer Secondary xxxxxxxxh R/W AHCI Index Register 00000000h R/W, RO AHCI Index Data Register xxxxxxxxh R/W Datasheet SATA Controller Registers (D31:F2) 14.2.1 BMIC[P,S]--Bus Master IDE Command Register (D31:F2) Address Offset: Primary: BAR + 00h Secondary: BAR + 08h Default Value: 00h Bit 7:4 3 2:1 Attribute: R/W Size: 8 bits Description Reserved. Returns 0. Read / Write Control (R/WC)--R/W. This bit sets the direction of the bus master transfer. This bit must NOT be changed when the bus master function is active. 0 = Memory reads 1 = Memory writes Reserved. Returns 0. Start/Stop Bus Master (START)--R/W. 0 0 = All state information is lost when this bit is cleared. Master mode operation cannot be stopped and then resumed. If this bit is reset while bus master operation is still active (that is, the Bus Master IDE Active bit (D31:F2:BAR + 02h, bit 0) of the Bus Master IDE Status register for that IDE channel is set) and the drive has not yet finished its data transfer (the Interrupt bit in the Bus Master IDE Status register for that IDE channel is not set), the bus master command is said to be aborted and data transferred from the drive may be discarded instead of being written to system memory. 1 = Enables bus master operation of the controller. Bus master operation does not actually start unless the Bus Master Enable bit (D31:F2:04h, bit 2) in PCI configuration space is also set. Bus master operation begins when this bit is detected changing from 0 to 1. The controller will transfer data between the IDE device and memory only when this bit is set. Master operation can be halted by writing a 0 to this bit. NOTE: This bit is intended to be cleared by software after the data transfer is completed, as indicated by either the Bus Master IDE Active bit being cleared or the Interrupt bit of the Bus Master IDE Status register for that IDE channel being set, or both. Hardware does not clear this bit automatically. If this bit is cleared to 0 prior to the DMA data transfer being initiated by the drive in a device to memory data transfer, then the PCH will not send DMAT to terminate the data transfer. SW intervention (such as, sending SRST) is required to reset the interface in this condition. Datasheet 601 SATA Controller Registers (D31:F2) 14.2.2 BMIS[P,S]--Bus Master IDE Status Register (D31:F2) Address Offset: Primary: BAR + 02h Secondary: BAR + 0Ah Default Value: 00h Bit Attribute: R/W, R/WC, RO Size: 8 bits Description PRD Interrupt Status (PRDIS)--R/WC. 7 0 = Software clears this bit by writing a 1 to it. 1 = This bit is set when the host controller execution of a PRD that has its PRD_INT bit set. Drive 1 DMA Capable--R/W. 6 0 = Not Capable. 1 = Capable. Set by device dependent code (BIOS or device driver) to indicate that drive 1 for this channel is capable of DMA transfers, and that the controller has been initialized for optimum performance. The PCH does not use this bit. It is intended for systems that do not attach BMIDE to the PCI bus. Drive 0 DMA Capable--R/W. 5 4:3 0 = Not Capable 1 = Capable. Set by device dependent code (BIOS or device driver) to indicate that drive 0 for this channel is capable of DMA transfers, and that the controller has been initialized for optimum performance. The PCH does not use this bit. It is intended for systems that do not attach BMIDE to the PCI bus. Reserved. Returns 0. Interrupt--R/WC. 2 0 = Software clears this bit by writing a 1 to it. 1 = Set when a device FIS is received with the `I' bit set, provided that software has not disabled interrupts using the IEN bit of the Device Control Register (see chapter 5 of the Serial ATA Specification, Revision 1.0a). Error--R/WC. 1 0 = Software clears this bit by writing a 1 to it. 1 = This bit is set when the controller encounters a target abort or master abort when transferring data on PCI. Bus Master IDE Active (ACT)--RO. 0 602 0 = This bit is cleared by the PCH when the last transfer for a region is performed, where EOT for that region is set in the region descriptor. It is also cleared by the PCH when the Start Bus Master bit (D31:F2:BAR+ 00h, bit 0) is cleared in the Command register. When this bit is read as a 0, all data transferred from the drive during the previous bus master command is visible in system memory, unless the bus master command was aborted. 1 = Set by the PCH when the Start bit is written to the Command register. Datasheet SATA Controller Registers (D31:F2) 14.2.3 BMID[P,S]--Bus Master IDE Descriptor Table Pointer Register (D31:F2) Address Offset: Primary: BAR + 04h-07h Attribute: Secondary: BAR + 0Ch-0Fh Default Value: All bits undefined Size: 32 bits Bit Description 31:2 Address of Descriptor Table (ADDR)--R/W. The bits in this field correspond to bits [31:2] of the memory location of the Physical Region Descriptor (PRD). The Descriptor Table must be Dword-aligned. The Descriptor Table must not cross a 64-K boundary in memory. 1:0 14.2.4 R/W Reserved AIR--AHCI Index Register (D31:F2) Address Offset: Primary: BAR + 10h Default Value: 00000000h Attribute: Size: R/W 32 bits This register is available only when SCC is not 01h. Bit 31:11 10:2 1:0 14.2.5 Description Reserved Index (INDEX)--R/W. This Index register is used to select the Dword offset of the Memory Mapped AHCI register to be accessed. A Dword, Word or Byte access is specified by the active byte enables of the I/O access to the Data register. Reserved AIDR--AHCI Index Data Register (D31:F2) Address Offset: Primary: BAR + 14h Default Value: All bits undefined Attribute: Size: R/W 32 bits This register is available only when SCC is not 01h. Bit 31:0 Description Data (DATA)--R/W. This Data register is a "window" through which data is read or written to the AHCI memory mapped registers. A read or write to this Data register triggers a corresponding read or write to the memory mapped register pointed to by the Index register. The Index register must be setup prior to the read or write to this Data register. Note that a physical register is not actually implemented as the data is actually stored in the memory mapped registers. Since this is not a physical register, the "default" value is the same as the default value of the register pointed to by Index. Datasheet 603 SATA Controller Registers (D31:F2) 14.3 Serial ATA Index/Data Pair Superset Registers All of these I/O registers are in the core well. They are exposed only when SCC is 01h (that is, IDE programming interface). These are Index/Data Pair registers that are used to access the SerialATA superset registers (SerialATA Status, SerialATA Control, and SerialATA Error). The I/O space for these registers is allocated through SIDPBA. Locations with offset from 08h to 0Fh are reserved for future expansion. Software-write operations to the reserved locations will have no effect while software-read operations to the reserved locations will return 0. 14.3.1 Offset Mnemonic Register 00h-03h SINDEX Serial ATA Index 04h-07h SDATA Serial ATA Data 08h-0Ch -- Reserved 0Ch-0Fh -- Reserved SINDX--Serial ATA Index Register (D31:F2) Address Offset: SIDPBA + 00h Default Value: 00000000h Bit 31:16 Attribute: Size: R/W 32 bits Description Reserved Port Index (PIDX)--R/W. This Index field is used to specify the port of the SATA controller at which the port-specific SSTS, SCTL, and SERR registers are located. 00h = Primary Master (Port 0) 15.8 01h = Primary Slave (Port 2) 02h = Secondary Master (Port 1) 03h = Secondary Slave (Port 3) All other values are Reserved. 7:0 Register Index (RIDX)--R/W. This index field is used to specify one out of three registers currently being indexed into. These three registers are the Serial ATA superset SStatus, SControl and SError memory registers and are port specific, hence for this SATA controller, there are four sets of these registers. See Section 14.4.2.10, Section 14.4.2.11, and Section 14.4.2.12 for definitions of the SStatus, SControl and SError registers. 00h = SSTS 01h = SCTL 02h = SERR All other values are Reserved. 604 Datasheet SATA Controller Registers (D31:F2) 14.3.2 SDATA--Serial ATA Data Register (D31:F2) Address Offset: SIDPBA + 04h Default Value: 00000000h Attribute: Size: R/W 32 bits Bit Description 31:0 Data (DATA)--R/W. This Data register is a "window" through which data is read or written to from the register pointed to by the Serial ATA Index (SINDX) register above. Note that a physical register is not actually implemented as the data is actually stored in the memory mapped registers. Since this is not a physical register, the "default" value is the same as the default value of the register pointed to by SINDX.RIDX field. 14.3.2.1 PxSSTS--Serial ATA Status Register (D31:F2) Address Offset: Default Value: 00000000h Attribute: Size: RO 32 bits SDATA when SINDX.RIDX is 00h. This is a 32-bit register that conveys the current state of the interface and host. The PCH updates it continuously and asynchronously. When the PCH transmits a COMRESET to the device, this register is updated to its reset values. Bit 31:12 Description Reserved Interface Power Management (IPM)--RO. Indicates the current interface state: Value 11:8 Description 0h Device not present or communication not established 1h Interface in active state 2h Interface in PARTIAL power management state 6h Interface in SLUMBER power management state All other values reserved. Current Interface Speed (SPD)--RO. Indicates the negotiated interface communication speed. Value Description 7:4 0h Device not present or communication not established 1h Generation 1 communication rate negotiated 2h Generation 2 communication rate negotiated All other values reserved. The PCH Supports Generation 1 communication rates (1.5 Gb/s) and Gen 2 rates (3.0 Gb/s). Device Detection (DET)--RO. This field indicates the interface device detection and Phy state: Value 3:0 Description 0h No device detected and Phy communication not established 1h Device presence detected but Phy communication not established 3h Device presence detected and Phy communication established 4h Phy in offline mode as a result of the interface being disabled or running in a BIST loopback mode All other values reserved. Datasheet 605 SATA Controller Registers (D31:F2) 14.3.2.2 PxSCTL--Serial ATA Control Register (D31:F2) Address Offset: Default Value: 00000004h Attribute: Size: R/W, RO 32 bits SDATA when SINDX.RIDX is 01h. This is a 32-bit read-write register by which software controls SATA capabilities. Writes to the SControl register result in an action being taken by the PCH or the interface. Reads from the register return the last value written to it. Bit Description 31:16 Reserved 15:12 Select Power Management (SPM)--RO. This field is not used by AHCI. Interface Power Management Transitions Allowed (IPM)--R/W. This field indicates which power states the PCH is allowed to transition to: Value 11:8 Description 0h No interface restrictions 1h Transitions to the PARTIAL state disabled 2h Transitions to the SLUMBER state disabled 3h Transitions to both PARTIAL and SLUMBER states disabled All other values reserved Speed Allowed (SPD)--R/W. Indicates the highest allowable speed of the interface. This speed is limited by the CAP.ISS (ABAR+00h:bit 23:20) field. Value Description 7:4 0h No speed negotiation restrictions 1h Limit speed negotiation to Generation 1 communication rate 2h Limit speed negotiation to Generation 2 communication rate All other values reserved. The PCH Supports Generation 1 communication rates (1.5 Gb/s) and Gen 2 rates (3.0 Gb/s). Device Detection Initialization (DET)--R/W. Controls the PCH's device detection and interface initialization. Value Description 0h No device detection or initialization action requested 1h Perform interface communication initialization sequence to establish communication. This is functionally equivalent to a hard reset and results in the interface being reset and communications re-initialized 4h Disable the Serial ATA interface and put Phy in offline mode 3:0 All other values reserved. When this field is written to a 1h, the PCH initiates COMRESET and starts the initialization process. When the initialization is complete, this field shall remain 1h until set to another value by software. This field may only be changed to 1h or 4h when PxCMD.ST is 0. Changing this field while the PCH is running results in undefined behavior. 606 Datasheet SATA Controller Registers (D31:F2) 14.3.2.3 PxSERR--Serial ATA Error Register (D31:F2) Address Offset: Default Value: 00000000h Attribute: Size: R/WC 32 bits SDATA when SINDx.RIDX is 02h. Bits 26:16 of this register contain diagnostic error information for use by diagnostic software in validating correct operation or isolating failure modes. Bits 11:0 contain error information used by host software in determining the appropriate response to the error condition. If one or more of bits 11:8 of this register are set, the controller will stop the current transfer. Bit Description 31:27 Reserved Exchanged (X): When set to one, this bit indicates that a change in device presence has been detected since the last time this bit was cleared. This bit shall always be set to 1 anytime a COMINIT signal is received. This bit is reflected in the P0IS.PCS bit. Unrecognized FIS Type (F): Indicates that one or more FISs were received by the Transport layer with good CRC, but had a type field that was not recognized. Transport state transition error (T): Indicates that an error has occurred in the transition from one state to another within the Transport layer since the last time this bit was cleared. Link Sequence Error (S): Indicates that one or more Link state machine error conditions was encountered. The Link Layer state machine defines the conditions under which the link layer detects an erroneous transition. Handshake (H). Indicates that one or more R_ERR handshake response was received in response to frame transmission. Such errors may be the result of a CRC error detected by the recipient, a disparity or 8b/10b decoding error, or other error condition leading to a negative handshake on a transmitted frame. CRC Error (C). Indicates that one or more CRC errors occurred with the Link Layer. Disparity Error (D). This field is not used by AHCI. 10b to 8b Decode Error (B). Indicates that one or more 10b to 8b decoding errors occurred. Comm Wake (W). Indicates that a Comm Wake signal was detected by the Phy. Phy Internal Error (I). Indicates that the Phy detected some internal error. PhyRdy Change (N): When set to 1, this bit indicates that the internal PhyRdy signal changed state since the last time this bit was cleared. In the PCH, this bit will be set when PhyRdy changes from a 0 -> 1 or a 1 -> 0. The state of this bit is then reflected in the PxIS.PRCS interrupt status bit and an interrupt will be generated if enabled. Software clears this bit by writing a 1 to it. Reserved Internal Error (E). The SATA controller failed due to a master or target abort when attempting to access system memory. Protocol Error (P). A violation of the Serial ATA protocol was detected. NOTE: PCH does not set this bit for all protocol violations that may occur on the SATA link. Persistent Communication or Data Integrity Error (C). A communication error that was not recovered occurred that is expected to be persistent. Persistent communications errors may arise from faulty interconnect with the device, from a device that has been removed or has failed, or a number of other causes. Transient Data Integrity Error (T): A data integrity error occurred that was not recovered by the interface. Reserved Recovered Communications Error (M). Communications between the device and host was temporarily lost but was re-established. This can arise from a device temporarily being removed, from a temporary loss of Phy synchronization, or from other causes and may be derived from the PhyNRdy signal between the Phy and Link layers. Recovered Data Integrity Error (I). A data integrity error occurred that was recovered by the interface through a retry operation or other recovery action. 26 25 24 23 22 21 20 19 18 17 16 15:12 11 10 9 8 7:2 1 0 Datasheet 607 SATA Controller Registers (D31:F2) 14.4 AHCI Registers (D31:F2) Note: These registers are AHCI-specific and available when the PCH is properly configured. The Serial ATA Status, Control, and Error registers are special exceptions and may be accessed on all PCH components if properly configured; see Section 14.3 for details. The memory mapped registers within the SATA controller exist in non-cacheable memory space. Additionally, locked accesses are not supported. If software attempts to perform locked transactions to the registers, indeterminate results may occur. Register accesses shall have a maximum size of 64-bits; 64-bit access must not cross an 8-byte alignment boundary. All memory registers are reset by Function Level Reset unless specified otherwise. The registers are broken into two sections--generic host control and port control. The port control registers are the same for all ports, and there are as many registers banks as there are ports. Table 14-3. AHCI Register Address Map ABAR + Offset Mnemonic 00-1Fh GHC 20h-FFh -- 100h-17Fh P0PCR 180h-1FFh P1PCR Register Generic Host Control Reserved Port 0 port control registers Port 1 port control registers Port 2 port control registers (Desktop Only) 200h-27Fh P2PCR 280h-2FFh P3PCR Registers are not available and software must not read or write registers. (Mobile Only) 300h-37Fh P4PCR Port 4 port control registers Registers are not available and software must not read or write registers. (Mobile Only) Port 3 port control registers (Desktop Only) 608 380h-3FFh P5PCR Port 5 port control registers 400h-47Fh P6PCR Port 6 port control registers 480h-4FFh P7PCR Port 7 port control registers Datasheet SATA Controller Registers (D31:F2) 14.4.1 AHCI Generic Host Control Registers (D31:F2) Table 14-4. Generic Host Controller Register Address Map ABAR + Offset 00h-03h CAP Register Host Capabilities Default Type FF22FFC2h (desktop) DE127F03h (mobile) R/WO, RO 04h-07h GHC Global PCH Control 00000000h R/W, RO 08h-0Bh IS Interrupt Status 00000000h R/WC 0Ch-0Fh PI Ports Implemented 00000000h R/WO, RO 10h-13h VS AHCI Version 00010200h RO 14h-17h CCC_CTL Command Completion Coalescing Control 00010121h R/W, RO 18h-1Bh CCC_PORTS Command Completion Coalescing Ports 00000000h R/W 1Ch-1Fh EM_LOC Enclosure Management Location 01600002h RO 20h-23h EM_CTRL Enclosure Management Control 07010000h R/W, R/WO, RO 70h-73h VS AHCI Version 00010000h RO A0h-A3h VSP Vendor Specific 00000001h RO, R/WO 003Fh RWO C8h-C9h 14.4.1.1 Mnemonic RSTF (R) Intel RST Feature Capabilities CAP--Host Capabilities Register (D31:F2) Address Offset: Default Value: ABAR + 00h-03h FF22FFC2h (Desktop) DE127F03h (Mobile) Function Level Reset: No Attribute: Size: R/WO, RO 32 bits All bits in this register that are R/WO are reset only by PLTRST#. Bit Description 31 Supports 64-bit Addressing (S64A)--RO. Indicates that the SATA controller can access 64-bit data structures. The 32-bit upper bits of the port DMA Descriptor, the PRD Base, and each PRD entry are read/write. 30 Supports Command Queue Acceleration (SCQA)--RO. Hardwired to 1 to indicate that the SATA controller supports SATA command queuing using the DMA Setup FIS. The PCH handles DMA Setup FISes natively, and can handle autoactivate optimization through that FIS. 29 Supports SNotification Register (SSNTF)--RO. The PCH SATA Controller does not support the SNotification register. 28 Supports Interlock Switch (SIS)--R/WO. Indicates whether the SATA controller supports interlock switches on its ports for use in Hot Plug operations. This value is loaded by platform BIOS prior to OS initialization. If this bit is set, BIOS must also map the SATAGP pins to the SATA controller through GPIO space. Datasheet 609 SATA Controller Registers (D31:F2) Bit 27 Description Supports Staggered Spin-up (SSS)--R/WO. Indicates whether the SATA controller supports staggered spin-up on its ports, for use in balancing power spikes. This value is loaded by platform BIOS prior to OS initialization. 0 = Staggered spin-up not supported. 1 = Staggered spin-up supported. Supports Aggressive Link Power Management (SALP)--R/WO. 26 0 = Software shall treat the PxCMD.ALPE and PxCMD.ASP bits as reserved. 1 = The SATA controller supports auto-generating link requests to the partial or slumber states when there are no commands to process. 25 Supports Activity LED (SAL)--RO. Indicates that the SATA controller supports a single output pin (SATALED#) which indicates activity. 24 Supports Command List Override (SCLO)--R/WO. When set to 1, indicates that the Controller supports the PxCMD.CLO bit and its associated function. When cleared to 0, the Controller is not capable of clearing the BSY and DRQ bits in the Status register to issue a software reset if these bits are still set from a previous operation. 23:20 Interface Speed Support (ISS)--R/WO. Indicates the maximum speed the SATA controller can support on its ports. 2h =3.0 Gb/s. 19 18 17:16 Supports Non-Zero DMA Offsets (SNZO)--RO. Reserved, as per the AHCI Revision 1.2 specification Supports AHCI Mode Only (SAM)--RO. The SATA controller may optionally support AHCI access mechanism only. 0 = SATA controller supports both IDE and AHCI Modes 1 = SATA controller supports AHCI Mode Only BIOS must set these bits to 00. 15 PIO Multiple DRQ Block (PMD)--RO. The SATA controller supports PIO Multiple DRQ Command Block 14 Slumber State Capable (SSC)--R/WO. The SATA controller supports the slumber state. 13 Partial State Capable (PSC)--R/WO. The SATA controller supports the partial state. 12:8 Number of Command Slots (NCS)--RO. Hardwired to 1Fh to indicate support for 32 slots. Command Completion Coalescing Supported (CCCS)--R/WO. 7 0 = Command Completion Coalescing Not Supported 1 = Command Completion Coalescing Supported Enclosure Management Supported (EMS)--R/WO. 6 0 = Enclosure Management Not Supported 1 = Enclosure Management Supported Supports External SATA (SXS)--R/WO. 5 0 = External SATA is not supported on any ports 1 = External SATA is supported on one or more ports When set, SW can examine each SATA port's Command Register (PxCMD) to determine which port is routed externally. 4:0 610 Number of Ports (NPS)--RO. Indicates number of supported ports. Note that the number of ports indicated in this field may be more than the number of ports indicated in the PI (ABAR + 0Ch) register. Datasheet SATA Controller Registers (D31:F2) 14.4.1.2 GHC--Global PCH Control Register (D31:F2) Address Offset: ABAR + 04h-07h Default Value: 00000000h Bit 31 Attribute: Size: R/W, RO 32 bits Description AHCI Enable (AE)--R/W. When set, this bit indicates that an AHCI driver is loaded and the controller will be talked to using AHCI mechanisms. This can be used by an PCH that supports both legacy mechanisms (such as SFF-8038i) and AHCI to know when the controller will not be talked to as legacy. 0 = Software will communicate with the PCH using legacy mechanisms. 1 = Software will communicate with the PCH using AHCI. The PCH will not have to allow command processing using both AHCI and legacy mechanisms. Software shall set this bit to 1 before accessing other AHCI registers. 30:3 Reserved MSI Revert to Single Message (MRSM)--RO: When set to 1 by hardware, this bit indicates that the host controller requested more than one MSI vector but has reverted to using the first vector only. When this bit is cleared to 0, the Controller has not reverted to single MSI mode (that is, hardware is already in single MSI mode, software has allocated the number of messages requested, or hardware is sharing interrupt vectors if MC.MME < MC.MMC). "MC.MSIE = 1 (MSI is enabled) "MC.MMC > 0 (multiple messages requested) "MC.MME > 0 (more than one message allocated) 2 "MC.MME!= MC.MMC (messages allocated not equal to number requested) When this bit is set to 1, single MSI mode operation is in use and software is responsible for clearing bits in the IS register to clear interrupts. This bit shall be cleared to 0 by hardware when any of the four conditions stated is false. This bit is also cleared to 0 when MC.MSIE = 1 and MC.MME = 0h. In this case, the hardware has been programmed to use single MSI mode, and is not "reverting" to that mode. For PCH, the Controller shall always revert to single MSI mode when the number of vectors allocated by the host is less than the number requested. This bit is ignored when GHC.HR = 1. Interrupt Enable (IE)--R/W. This global bit enables interrupts from the PCH. 1 0 = All interrupt sources from all ports are disabled. 1 = Interrupts are allowed from the AHCI controller. Controller Reset (HR)--R/W. Resets the PCH AHCI controller. 0 Datasheet 0 = No effect 1 = When set by software, this bit causes an internal reset of the PCH AHCI controller. All state machines that relate to data transfers and queuing return to an idle condition, and all ports are re-initialized using COMRESET. NOTE: For further details, see Section 12.3.3 of the Serial ATA Advanced Host Controller Interface specification. 611 SATA Controller Registers (D31:F2) 14.4.1.3 IS--Interrupt Status Register (D31:F2) Address Offset: ABAR + 08h-0Bh Default Value: 00000000h Attribute: Size: R/WC 32 bits This register indicates which of the ports within the controller have an interrupt pending and require service. Bit 31:9 8 (Desktop Only) Description Reserved. Returns 0. Coalescing Interrupt Pending Status (CIPS)--R/WC. 0 = No interrupt pending. 1 = A command completion coalescing interrupt has been generated. Interrupt Pending Status Port[7] (IPS[6])--R/WC. 7 0 = No interrupt pending. 1 = Port 7 has an interrupt pending. Software can use this information to determine which ports require service after an interrupt. Interrupt Pending Status Port[6] (IPS[6])--R/WC. 6 0 = No interrupt pending. 1 = Port 6 has an interrupt pending. Software can use this information to determine which ports require service after an interrupt. Interrupt Pending Status Port[5] (IPS[5])--R/WC. 5 0 = No interrupt pending. 1 = Port 5 has an interrupt pending. Software can use this information to determine which ports require service after an interrupt. Interrupt Pending Status Port[4] (IPS[4])--R/WC. 4 3 (Desktop Only) 2 (Desktop Only) 3:2 (Mobile Only) 0 = No interrupt pending. 1 = Port 4 has an interrupt pending. Software can use this information to determine which ports require service after an interrupt. Interrupt Pending Status Port[3] (IPS[3])--R/WC. 0 = No interrupt pending. 1 = Port 3 has an interrupt pending. Software can use this information to determine which ports require service after an interrupt. Interrupt Pending Status Port[2] (IPS[2])--R/WC. 0 = No interrupt pending. 1 = Port 2 has an interrupt pending. Software can use this information to determine which ports require service after an interrupt. Reserved. Returns 0. Interrupt Pending Status Port[1] (IPS[1])--R/WC. 1 0 = No interrupt pending. 1 = Port 1has an interrupt pending. Software can use this information to determine which ports require service after an interrupt. Interrupt Pending Status Port[0] (IPS[0])--R/WC. 0 612 0 = No interrupt pending. 1 = Port 0 has an interrupt pending. Software can use this information to determine which ports require service after an interrupt. Datasheet SATA Controller Registers (D31:F2) 14.4.1.4 PI--Ports Implemented Register (D31:F2) Address Offset: ABAR + 0Ch-0Fh Default Value: 00000000h Function Level Reset: No Attribute: Size: R/WO, RO 32 bits This register indicates which ports are exposed to the PCH. It is loaded by platform BIOS. It indicates which ports that the device supports are available for software to use. For ports that are not available, software must not read or write to registers within that port. Bit 31:6 Description Reserved. Returns 0. Ports Implemented Port 5 (PI5)--R/WO. 5 0 = The port is not implemented. 1 = The port is implemented. This bit is read-only 0 if MAP.SC = 0 or SCC = 01h. Ports Implemented Port 4 (PI4)--R/WO. 4 0 = The port is not implemented. 1 = The port is implemented. This bit is read-only 0 if MAP.SC = 0 or SCC = 01h. 3 (Mobile Only) Ports Implemented Port 3 (PI3)--RO. 0 = The port is not implemented. Ports Implemented Port 3 (PI3)--R/WO. 3 2 (Mobile Only) 0 = The port is not implemented. 1 = The port is implemented. Ports Implemented Port 2 (PI2)--RO. 0 = The port is not implemented. Ports Implemented Port 2 (PI2)--R/WO. 2 0 = The port is not implemented. 1 = The port is implemented. Ports Implemented Port 1 (PI1)--R/WO. 1 0 = The port is not implemented. 1 = The port is implemented. 0 0 = The port is not implemented. 1 = The port is implemented. Ports Implemented Port 0 (PI0)--R/WO. Datasheet 613 SATA Controller Registers (D31:F2) 14.4.1.5 VS--AHCI Version Register (D31:F2) Address Offset: ABAR + 10h-13h Default Value: 00010200h Attribute: Size: RO 32 bits This register indicates the major and minor version of the AHCI specification. It is BCD encoded. The upper two bytes represent the major version number, and the lower two bytes represent the minor version number. Example: Version 3.12 would be represented as 00030102h. The current version of the specification is 1.20 (00010200h). Bit 31:16 15:0 14.4.1.6 Description Major Version Number (MJR)--RO. Indicates the major version is 1 Minor Version Number (MNR)--RO. Indicates the minor version is 20. CCC_CTL--Command Completion Coalescing Control Register (D31:F2) Address Offset: ABAR + 14h-17h Default Value: 00010131h Attribute: Size: R/W, RO 32 bits This register is used to configure the command coalescing feature. This register is reserved if command coalescing is not supported (CAP_CCCS = 0). Bit Description 31:16 Timeout Value (TV)--R/W. The timeout value is specified in 10 microsecond intervals. hbaCCC_Timer is loaded with this timeout value. hbaCCC_Timer is only decremented when commands are outstanding on the selected ports. The Controller will signal a CCC interrupt when hbaCCC_Timer has decremented to 0. The hbaCCC_Timer is reset to the timeout value on the assertion of each CCC interrupt. A timeout value of 0 is invalid. Command Completions (CC)--R/W. Specifies the number of command completions that are necessary to cause a CCC interrupt. The Controller has an internal command completion counter, hbaCCC_CommandsComplete. 15:8 7:3 hbaCCC_CommandsComplete is incremented by one each time a selected port has a command completion. When hbaCCC_CommandsComplete is equal to the command completions value, a CCC interrupt is signaled. The internal command completion counter is reset to `0' on the assertion of each CCC interrupt. Interrupt (INT)--RO. Specifies the interrupt used by the CCC feature. This interrupt must be marked as unused in the AHCI Ports Implemented memory register by the corresponding bit being set to 0. Thus, the CCC_interrupt corresponds to the interrupt for an unimplemented port on the controller. When a CCC interrupt occurs, the IS[INT] bit shall be asserted to 1 regardless of whether PIRQ interrupt or MSI is used. Note that in MSI, CC interrupt may share an interrupt vector with other ports. For example, if the number of message allocated is 4, then CCC interrupt share interrupt vector 3 along with port 3, 4, and 5 but IS[6] shall get set. 2:1 Reserved Enable (EN)--R/W. 0 0 = The command completion coalescing feature is disabled and no CCC interrupts are generated 1 = The command completion coalescing feature is enabled and CCC interrupts may be generated based on timeout or command completion conditions. Software shall only change the contents of the TV and CC fields when EN is cleared to 0. On transition of this bit from 0 to 1, any updated values for the TV and CC fields shall take effect. 614 Datasheet SATA Controller Registers (D31:F2) 14.4.1.7 CCC_Ports--Command Completion Coalescing Ports Register (D31:F2) Address Offset: ABAR + 18h-1Bh Default Value: 00000000h Attribute: Size: R/W 32 bits This register is used to specify the ports that are coalesced as part of the CCC feature when CCC_CTL.EN = 1. This register is reserved if command coalescing is not supported (CAP_CCCS = 0). Bit Description Ports (PRT)--R/W. 31:0 0 = The port is not part of the command completion coalescing feature. 1 = The corresponding port is part of the command completion coalescing feature. Bits set to 1 in this register must also have the corresponding bit set to 1 in the Ports Implemented register. Bits set to 1 in this register must also have the corresponding bit set to 1 in the Ports Implemented register. An updated value for this field shall take effect within one timer increment (1 millisecond). 14.4.1.8 EM_LOC--Enclosure Management Location Register (D31:F2) Address Offset: ABAR + 1Ch-1Fh Default Value: 01600002h Attribute: Size: RO 32 bits This register identifies the location and size of the enclosure management message buffer. This register is reserved if enclosure management is not supported (that is, CAP.EMS = 0). Bit 31:16 15:0 Description Offset (OFST)--RO. The offset of the message buffer in Dwords from the beginning of the ABAR. Buffer Size (SZ)--RO. Specifies the size of the transmit message buffer area in Dwords. The PCH SATA controller only supports transmit buffer. A value of 0 is invalid. Datasheet 615 SATA Controller Registers (D31:F2) 14.4.1.9 EM_CTRL--Enclosure Management Control Register (D31:F2) Address Offset: ABAR + 20h-23h Default Value: 07010000h Attribute: Size: R/W, R/WO, RO 32 bits This register is used to control and obtain status for the enclosure management interface. This register includes information on the attributes of the implementation, enclosure management messages supported, the status of the interface, whether any message are pending, and is used to initiate sending messages. This register is reserved if enclosure management is not supported (CAP_EMS = 0). Bit 31:27 26 Description Reserved Activity LED Hardware Driven (ATTR.ALHD)--R/WO. 1 = The SATA controller drives the activity LED for the LED message type in hardware and does not use software for this LED. The host controller does not begin transmitting the hardware based activity signal until after software has written CTL.TM=1 after a reset condition. Transmit Only (ATTR.XMT)--RO. 25 0 = The SATA controller supports transmitting and receiving messages. 1 = The SATA controller only supports transmitting messages and does not support receiving messages. Single Message Buffer (ATTR.SMB)--RO. 24 23:20 0 = There are separate receive and transmit buffers such that unsolicited messages could be supported. 1 = The SATA controller has one message buffer that is shared for messages to transmit and messages received. Unsolicited receive messages are not supported and it is software's responsibility to manage access to this buffer. Reserved 19 SGPIO Enclosure Management Messages (SUPP.SGPIO)--RO. 1 = The SATA controller supports the SGPIO register interface message type. 18 SES-2 Enclosure Management Messages (SUPP.SES2)--RO. 1 = The SATA controller supports the SES-2 message type. 17 SAF-TE Enclosure Management Messages (SUPP.SAFTE)--RO. 1 = The SATA controller supports the SAF-TE message type. 16 LED Message Types (SUPP.LED)--RO. 1 = The SATA controller supports the LED message type. 15:10 Reserved Reset (RST):--R/W. 9 0 = A write of 0 to this bit by software will have no effect. 1 = When set by software, The SATA controller shall reset all enclosure management message logic and take all appropriate reset actions to ensure messages can be transmitted / received after the reset. After the SATA controller completes the reset operation, the SATA controller shall set the value to 0. Transmit Message (CTL.TM)--R/W. 8 0 = A write of 0 to this bit by software will have no effect. 1 = When set by software, The SATA controller shall transmit the message contained in the message buffer. When the message is completely sent, the SATA controller shall set the value to 0. Software shall not change the contents of the message buffer while CTL.TM is set to 1. 7:1 0 616 Reserved Message Received (STS.MR):--RO. Message Received is not supported in the PCH. Datasheet SATA Controller Registers (D31:F2) 14.4.1.10 VS--AHCI Version Register (D31:F2) Address Offset: ABAR + 70h-73h Default Value: 00010000h Attribute: Size: RO 32 bits This register indicates the major and minor version of the NVMHCI specification. It is BCD encoded. The upper two bytes represent the major version number, and the lower two bytes represent the minor version number. Example: Version 3.12 would be represented as 00030102h. The current version of the specification is 1.0 (00010000h). Bit 31:16 15:0 14.4.1.11 Description Major Version Number (MJR)--RO. Indicates the major version is 1 Minor Version Number (MNR)--RO. Indicates the minor version is 0. VSP--Vendor Specific Register (D31:F2) Address Offset: ABAR + A0h-A3h Default Value: 00000001h Bit 31:1 Attribute: Size: RO, RWO 32 bits Description Reserved Supports Low Power Device Detection (SLPD)--RWO 0 Indicates whether SATA power management and device hot (un)pulg is supported. 0 = Not supported. 1 = Supported. 14.4.1.12 RSTF--Intel(R) RST Feature Capabilities Register Address Offset: ABAR + C8h-C9h Default Value: 003Fh Attribute: Size: RWO 16 bits No hardware action is taken on this register. This register is needed for the Intel(R) Rapid Storage Technology software. These bits are set by BIOS to request the feature from the appropriate Intel Rapid Storage Technology software. Bit 15:12 Description Reserved OROM UI Normal Delay (OUD)--R/WO. The values of these bits specify the delay of the OROM UI Splash Screen in a normal status. 00 = 2 Seconds (Default) 11:10 01 = 4 Seconds 10 = 6 Seconds 11 = 8 Seconds If bit 5 = 0b, these values will be disregarded. 9 Datasheet Reserved 617 SATA Controller Registers (D31:F2) Bit Description Intel(R) 8 RRT Only on eSATA (ROES)--R/WO Indicates the request that only Intel(R) Rapid Recovery Technology (RRT) volumes can can span internal and external SATA (eSATA). If not set, any RAID volume can span internal and external SATA. 0 = Disabled 1 = Enabled 7 Reserved HDD Unlock (HDDLK)--RWO 6 Indicates the requested status of HDD password unlock in the OS. 0 = Disabled 1 = Enabled Intel RST OROM UI (RSTOROMUI)--R/WO. Indicates the requested status of the Intel(R) RST OROM UI display. 5 0 = The Intel RST OROM UI and banner are not displayed if all disks and RAID volumes have a normal status. 1 = The Intel RST OROM UI is displayed during each boot. Intel(R) RRT Enable (RSTE)--RWO 4 Indicates the requested status of the Intel(R) Rapid Recovery Technology Support 0 = Disabled 1 = Enabled RAID 5 Enable (R5E)--RWO 3 Indicates the requested status of RAID 5 Support 0 = Disabled 1 = Enabled RAID 10 Enable (R10E)--RWO 2 Indicates the requested status of RAID 10 Support 0 = Disabled 1 = Enabled RAID 1 Enable (R1E)--RWO 1 Indicates the requested status of RAID 1 Support 0 = Disabled 1 = Enabled RAID 0 Enable (R0E)--RWO 0 Indicates the requested status of RAID 0 Support 0 = Disabled 1 = Enabled 618 Datasheet SATA Controller Registers (D31:F2) 14.4.2 Port Registers (D31:F2) Ports not available will result in the corresponding Port DMA register space being reserved. The controller shall ignore writes to the reserved space on write cycles and shall return 0 on read cycle accesses to the reserved location. Table 14-5. Port [5:0] DMA Register Address Map (Sheet 1 of 4) Datasheet ABAR + Offset Mnemonic 100h-103h P0CLB Register Port 0 Command List Base Address 104h-107h P0CLBU 108h-10Bh P0FB Port 0 Command List Base Address Upper 32-Bits 10Ch-10Fh P0FBU 110h-113h P0IS Port 0 Interrupt Status Port 0 Interrupt Enable Port 0 FIS Base Address Port 0 FIS Base Address Upper 32-Bits 114h-117h P0IE 118h-11Bh P0CMD 11Ch-11Fh -- 120h-123h P0TFD Port 0 Task File Data Port 0 Signature Port 0 Command Reserved 124h-127h P0SIG 128h-12Bh P0SSTS Port 0 Serial ATA Status 12Ch-12Fh P0SCTL Port 0 Serial ATA Control 130h-133h P0SERR Port 0 Serial ATA Error 134h-137h P0SACT Port 0 Serial ATA Active 138h-13Bh P0CI Port 0 Command Issue 13Ch-17Fh -- 180h-183h P1CLB Reserved Port 1 Command List Base Address 184h-187h P1CLBU 188h-18Bh P1FB 18Ch-18Fh P1FBU 190h-193h P1IS Port 1 Interrupt Status Port 1 Interrupt Enable 194h-197h P1IE 198h-19Bh P1CMD 19Ch-19Fh -- 1A0h-1A3h P1TFD Port 1 Command List Base Address Upper 32-Bits Port 1 FIS Base Address Port 1 FIS Base Address Upper 32-Bits Port 1 Command Reserved Port 1 Task File Data 1A4h-1A7h P1SIG 1A8h-1ABh P1SSTS Port 1 Serial ATA Status Port 1 Signature 1ACh-1AFh P1SCTL Port 1 Serial ATA Control 1B0h-1B3h P1SERR Port 1 Serial ATA Error 1B4h-1B7h P1SACT Port 1 Serial ATA Active 1B8h-1BBh P1CI Port 1 Command Issue 1BCh-1FFh -- Reserved 619 SATA Controller Registers (D31:F2) Table 14-5. Port [5:0] DMA Register Address Map (Sheet 2 of 4) 620 ABAR + Offset Mnemonic Register 200h-27Fh (Mobile Only) -- Reserved Registers are not available and software must not read from or write to registers. 200h-203h P2CLB 204h-207h P2CLBU Port 2 Command List Base Address 208h-20Bh P2FB 20Ch-20Fh P2FBU 210h-213h P2IS Port 2 Interrupt Status 214h-217h P2IE Port 2 Interrupt Enable 218h-21Bh P2CMD 21Ch-21Fh -- 220h-223h P2TFD Port 2 Task File Data 224h-227h P2SIG Port 2 Signature 228h-22Bh P2SSTS Port 2 Serial ATA Status 22Ch-22Fh P2SCTL Port 2 Serial ATA Control 230h-233h P2SERR Port 2 Serial ATA Error 234h-237h P2SACT Port 2 Serial ATA Active 238h-23Bh P2CI Port 2 Command Issue 23Ch-27Fh -- Reserved 280h-2FFh (Mobile Only) -- Reserved Registers are not available and software must not read from or write to registers. 280h-283h P3CLB 284h-287h P3CLBU 288h-28Bh P3FB 28Ch-28Fh P3FBU 290h-293h P3IS Port 3 Interrupt Status 294h-297h P3IE Port 3 Interrupt Enable 298h-29Bh P3CMD Port 2 Command List Base Address Upper 32-Bits Port 2 FIS Base Address Port 2 FIS Base Address Upper 32-Bits Port 2 Command Reserved Port 3 Command List Base Address Port 3 Command List Base Address Upper 32-Bits Port 3 FIS Base Address Port 3 FIS Base Address Upper 32-Bits Port 3 Command 29Ch-29Fh -- 2A0h-2A3h P3TFD Reserved Port 3 Task File Data 2A4h-2A7h P3SIG Port 3 Signature 2A8h-2ABh P3SSTS Port 3 Serial ATA Status 2ACh-2AFh P3SCTL Port 3 Serial ATA Control 2B0h-2B3h P3SERR Port 3 Serial ATA Error 2B4h-2B7h P3SACT Port 3 Serial ATA Active 2B8h-2BBh P3CI Port 3 Command Issue 2BCh-2FFh -- Reserved Datasheet SATA Controller Registers (D31:F2) Table 14-5. Port [5:0] DMA Register Address Map (Sheet 3 of 4) Datasheet ABAR + Offset Mnemonic 300h-303h P4CLB Register Port 4 Command List Base Address 304h-307h P4CLBU 308h-30Bh P4FB Port 4 Command List Base Address Upper 32-Bits 30Ch-30Fh P4FBU 310h-313h P4IS Port 4 Interrupt Status Port 4 Interrupt Enable Port 4 FIS Base Address Port 4 FIS Base Address Upper 32-Bits 314h-317h P4IE 318h-31Bh P4CMD 31Ch-31Fh -- 320h-323h P4TFD Port 4 Task File Data Port 4 Signature Port 4 Command Reserved 324h-327h P4SIG 328h-32Bh P4SSTS Port 4 Serial ATA Status 32Ch-32Fh P4SCTL Port 4 Serial ATA Control 330h-333h P4SERR Port 4 Serial ATA Error 334h-337h P4SACT Port 4 Serial ATA Active 338h-33Bh P4CI Port 4 Command Issue 340h-341h P4FBSI 342h-37Fh -- Port 4 FIS-Based Switching Control Reserved 380h-383h P5CLB 384h-387h P5CLBU 388h-38Bh P5FB 38Ch-38Fh P5FBU 390h-393h P5IS Port 5 Interrupt Status 394h-397h P5IE Port 5 Interrupt Enable 398h-39Bh P5CMD 39Ch-39Fh -- 3A0h-3A3h P5TFD Port 5 Task File Data 3A4h-3A7h P5SIG Port 5 Signature 3A8h-3ABh P5SSTS Port 5 Serial ATA Status 3ACh-3AFh P5SCTL Port 5 Serial ATA Control 3B0h-3B3h P5SERR Port 5 Serial ATA Error 3B4h-3B7h P5SACT Port 5 Serial ATA Active 3B8h-3BBh P5CI Port 5 Command Issue 3C0h-3C3h P5FBSI 3C4h-3FFh -- 400h-403h P6CLB 404h-407h P6CLBU 408h-40Bh P6FB Port 5 Command List Base Address Port 5 Command List Base Address Upper 32-Bits Port 5 FIS Base Address Port 5 FIS Base Address Upper 32-Bits Port 5 Command Reserved Port 5 FIS-Based Switching Control Reserved Port 6 Command List Base Address Port 6 Command List Base Address Upper 32-Bits Port 6 FIS Base Address 621 SATA Controller Registers (D31:F2) Table 14-5. Port [5:0] DMA Register Address Map (Sheet 4 of 4) 622 ABAR + Offset Mnemonic 40Ch-40Fh P6FBU 410h-413h P6IS Port 6 Interrupt Status 414h-417h P6IE Port 6 Interrupt Enable 418h-41Bh P6CMD 41Ch-41Fh -- 420h-423h P6TFD Port 6 Task File Data 424h-427h P6SIG Port 6 Signature 428h-42Bh P6SSTS Port 6 Serial ATA Status 42Ch-42Fh P6SCTL Port 6 Serial ATA Control 430h-433h P6SERR 434h-437h -- 438h-43Bh P6CI 43Ch-47Fh -- Register Port 6 FIS Base Address Upper 32-Bits Port 6 Command Reserved Port 6 Serial ATA Error Reserved Port 6Command Issue Reserved 480h-483h P7CLB 484h-487h P7CLBU 488h-48Fh -- 490h-493h P7IS Port 7 Interrupt Status Port 7 Interrupt Enable 494h-497h P7IE 498h-49Bh P7CMD 49Ch-4A3h -- 4A4h-4A7h P7SIG 4A8h-4B7h P7SSTS 4B8h-4BBh P7CI 4BCh-FFFh -- Port 7 Command List Base Address Port 7 Command List Base Address Upper 32-Bits Reserved Port 7 Command Reserved Port 7 Signature Reserved Port 7 Command Issue Reserved Datasheet SATA Controller Registers (D31:F2) 14.4.2.1 PxCLB--Port [5:0] Command List Base Address Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: Undefined + + + + + + + Bit 31:10 100h Attribute: 180h 200h (Desktop Only) 280h (Desktop Only) 300h 380h 400h Size: R/W 32 bits Description Command List Base Address (CLB)--R/W. Indicates the 32-bit base for the command list for this port. This base is used when fetching commands to execute. The structure pointed to by this address range is 1 KB in length. This address must be 1-KB aligned as indicated by bits 31:10 being read/write. Note that these bits are not reset on a Controller reset. 9:0 14.4.2.2 Reserved PxCLBU--Port [5:0] Command List Base Address Upper 32-Bits Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: Undefined Bit 31:0 + + + + + + + 104h Attribute: 184h 204h (Desktop Only) 284h (Desktop Only) 304h 384h 404h Size: R/W 32 bits Description Command List Base Address Upper (CLBU)--R/W. Indicates the upper 32-bits for the command list base address for this port. This base is used when fetching commands to execute. Note that these bits are not reset on a Controller reset. Datasheet 623 SATA Controller Registers (D31:F2) 14.4.2.3 PxFB--Port [5:0] FIS Base Address Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: Undefined + + + + + + + Bit 31:8 108h Attribute: 188h 208h (Desktop Only) 288h (Desktop Only) 308h 388h 408h Size: R/W 32 bits Description FIS Base Address (FB)--R/W. Indicates the 32-bit base for received FISes. The structure pointed to by this address range is 256 bytes in length. This address must be 256-byte aligned, as indicated by bits 31:3 being read/write. Note that these bits are not reset on a Controller reset. 7:0 14.4.2.4 Reserved PxFBU--Port [5:0] FIS Base Address Upper 32-Bits Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: Undefined Bit 31:0 + + + + + + + 10Ch Attribute: 18Ch 20Ch (Desktop Only) 28Ch (Desktop Only) 30Ch 38Ch 40Ch Size: R/W 32 bits Description FIS Base Address Upper (FBU)--R/W. Indicates the upper 32-bits for the received FIS base for this port. Note that these bits are not reset on a Controller reset. 624 Datasheet SATA Controller Registers (D31:F2) 14.4.2.5 PxIS--Port [5:0] Interrupt Status Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: 00000000h Bit + + + + + + + 110h Attribute: 190h 210h (Desktop Only) 290h (Desktop Only) 310h 390h 410h Size: R/WC, RO 32 bits Description 31 Cold Port Detect Status (CPDS)--RO. Cold presence detect is not supported. 30 Task File Error Status (TFES)--R/WC. This bit is set whenever the status register is updated by the device and the error bit (PxTFD.bit 0) is set. 29 Host Bus Fatal Error Status (HBFS)--R/WC. Indicates that the PCH encountered an error that it cannot recover from due to a bad software pointer. In PCI, such an indication would be a target or master abort. 28 Host Bus Data Error Status (HBDS)--R/WC. Indicates that the PCH encountered a data error (uncorrectable ECC / parity) when reading from or writing to system memory. 27 Interface Fatal Error Status (IFS)--R/WC. Indicates that the PCH encountered an error on the SATA interface which caused the transfer to stop. 26 Interface Non-fatal Error Status (INFS)--R/WC. Indicates that the PCH encountered an error on the SATA interface but was able to continue operation. 25 Reserved 24 Overflow Status (OFS)--R/WC. Indicates that the PCH received more bytes from a device than was specified in the PRD table for the command. 23 Incorrect Port Multiplier Status (IPMS)--R/WC. The PCH SATA controller does not support Port Multipliers. 22 21:8 7 PhyRdy Change Status (PRCS)--RO. When set to one, this bit indicates the internal PhyRdy signal changed state. This bit reflects the state of PxSERR.DIAG.N. Unlike most of the other bits in the register, this bit is RO and is only cleared when PxSERR.DIAG.N is cleared. Note that the internal PhyRdy signal also transitions when the port interface enters partial or slumber power management states. Partial and slumber must be disabled when Surprise Removal Notification is desired, otherwise the power management state transitions will appear as false insertion and removal events. Reserved Device Interlock Status (DIS)--R/WC. When set, this bit indicates that a platform interlock switch has been opened or closed, which may lead to a change in the connection state of the device. This bit is only valid in systems that support an interlock switch (CAP.SIS [ABAR+00:bit 28] set). For systems that do not support an interlock switch, this bit will always be 0. 6 Port Connect Change Status (PCS)--RO. This bit reflects the state of PxSERR.DIAG.X. (ABAR+130h/1D0h/230h/2D0h, bit 26) Unlike other bits in this register, this bit is only cleared when PxSERR.DIAG.X is cleared. 0 = No change in Current Connect Status. 1 = Change in Current Connect Status. 5 Datasheet Descriptor Processed (DPS)--R/WC. A PRD with the I bit set has transferred all its data. 625 SATA Controller Registers (D31:F2) 14.4.2.6 Bit Description 4 Unknown FIS Interrupt (UFS)--RO. When set to 1, this bit indicates that an unknown FIS was received and has been copied into system memory. This bit is cleared to 0 by software clearing the PxSERR.DIAG.F bit to 0. Note that this bit does not directly reflect the PxSERR.DIAG.F bit. PxSERR.DIAG.F is set immediately when an unknown FIS is detected, whereas this bit is set when the FIS is posted to memory. Software should wait to act on an unknown FIS until this bit is set to 1 or the two bits may become out of sync. 3 Set Device Bits Interrupt (SDBS)--R/WC. A Set Device Bits FIS has been received with the I bit set and has been copied into system memory. 2 DMA Setup FIS Interrupt (DSS)--R/WC. A DMA Setup FIS has been received with the I bit set and has been copied into system memory. 1 PIO Setup FIS Interrupt (PSS)--R/WC. A PIO Setup FIS has been received with the I bit set, it has been copied into system memory, and the data related to that FIS has been transferred. 0 Device to Host Register FIS Interrupt (DHRS)--R/WC. A D2H Register FIS has been received with the I bit set, and has been copied into system memory. PxIE--Port [5:0] Interrupt Enable Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: 00000000h + + + + + + + 114h Attribute: 194h 214h (Desktop Only) 294h (Desktop Only) 314h 394h 414h Size: R/W, RO 32 bits This register enables and disables the reporting of the corresponding interrupt to system software. When a bit is set (1) and the corresponding interrupt condition is active, then an interrupt is generated. Interrupt sources that are disabled (0) are still reflected in the status registers. Bit 626 Description 31 Cold Presence Detect Enable (CPDE)--RO. Cold Presence Detect is not supported. 30 Task File Error Enable (TFEE)--R/W. When set, and GHC.IE and PxTFD.STS.ERR (due to a reception of the error register from a received FIS) are set, the PCH will generate an interrupt. 29 Host Bus Fatal Error Enable (HBFE)--R/W. When set, and GHC.IE and PxS.HBFS are set, the PCH will generate an interrupt. 28 Host Bus Data Error Enable (HBDE)--R/W. When set, and GHC.IE and PxS.HBDS are set, the PCH will generate an interrupt. 27 Host Bus Data Error Enable (HBDE)--R/W. When set, GHC.IE is set, and PxIS.HBDS is set, the PCH will generate an interrupt. 26 Interface Non-fatal Error Enable (INFE)--R/W. When set, GHC.IE is set, and PxIS.INFS is set, the PCH will generate an interrupt. 25 Reserved 24 Overflow Error Enable (OFE)--R/W. When set, and GHC.IE and PxS.OFS are set, the PCH will generate an interrupt. Datasheet SATA Controller Registers (D31:F2) Bit Description 23 Incorrect Port Multiplier Enable (IPME)--R/W. The PCH SATA controller does not support Port Multipliers. BIOS and storage software should keep this bit cleared to 0. 22 PhyRdy Change Interrupt Enable (PRCE)--R/W. When set, and GHC.IE is set, and PxIS.PRCS is set, the PCH shall generate an interrupt. 21:8 7 Reserved Device Interlock Enable (DIE)--R/W. When set, and PxIS.DIS is set, the PCH will generate an interrupt. For systems that do not support an interlock switch, this bit shall be a read-only 0. Datasheet 6 Port Change Interrupt Enable (PCE)--R/W. When set, and GHC.IE and PxS.PCS are set, the PCH will generate an interrupt. 5 Descriptor Processed Interrupt Enable (DPE)--R/W. When set, and GHC.IE and PxS.DPS are set, the PCH will generate an interrupt 4 Unknown FIS Interrupt Enable (UFIE)--R/W. When set, and GHC.IE is set and an unknown FIS is received, the PCH will generate this interrupt. 3 Set Device Bits FIS Interrupt Enable (SDBE)--R/W. When set, and GHC.IE and PxS.SDBS are set, the PCH will generate an interrupt. 2 DMA Setup FIS Interrupt Enable (DSE)--R/W. When set, and GHC.IE and PxS.DSS are set, the PCH will generate an interrupt. 1 PIO Setup FIS Interrupt Enable (PSE)--R/W. When set, and GHC.IE and PxS.PSS are set, the PCH will generate an interrupt. 0 Device to Host Register FIS Interrupt Enable (DHRE)--R/W. When set, and GHC.IE and PxS.DHRS are set, the PCH will generate an interrupt. 627 SATA Controller Registers (D31:F2) 14.4.2.7 PxCMD--Port [5:0] Command Register (D31:F2) Address Offset: Port 0: ABAR + 118h Attribute: R/W, RO, R/WO Port 1: ABAR + 198h Port 2: ABAR + 218h (Desktop Only) Port 3: ABAR + 298h (Desktop Only) Port 4: ABAR + 318h Port 5: ABAR + 398h Port 6: ABAR + 418h Default Value: 0000w00wh Size: 32 bits where w = 00?0b (for?, see bit description) Function Level Reset:No (Bit 21, 19 and 18 only) Bit Description Interface Communication Control (ICC)--R/W.This is a four bit field that can be used to control reset and power states of the interface. Writes to this field will cause actions on the interface, either as primitives or an OOB sequence, and the resulting status of the interface will be reported in the PxSSTS register (Address offset Port 0:ABAR+124h, Port 1: ABAR+1A4h, Port 2: ABAR+224h, Port 3: ABAR+2A4h, Port 4: ABAR+224h, Port 5: ABAR+2A4h). Value Definition Fh-7h Reserved 6h 5h-3h 31:28 Slumber: This will cause the PCH to request a transition of the interface to the slumber state. The SATA device may reject the request and the interface will remain in its current state Reserved 2h Partial: This will cause the PCH to request a transition of the interface to the partial state. The SATA device may reject the request and the interface will remain in its current state. 1h Active: This will cause the PCH to request a transition of the interface into the active 0h No-Op / Idle: When software reads this value, it indicates the PCH is not in the process of changing the interface state or sending a device reset, and a new link command may be issued. When system software writes a non-reserved value other than No-Op (0h), the PCH will perform the action and update this field back to Idle (0h). If software writes to this field to change the state to a state the link is already in (such as, interface is in the active state and a request is made to go to the active state), the PCH will take no action and return this field to Idle. NOTE: When the ALPE bit (bit 26) is set, then this register should not be set to 02h or 06h. 628 27 Aggressive Slumber / Partial (ASP)--R/W. When set, and the ALPE bit (bit 26) is set, the PCH shall aggressively enter the slumber state when it clears the PxCI register and the PxSACT register is cleared. When cleared, and the ALPE bit is set, the PCH will aggressively enter the partial state when it clears the PxCI register and the PxSACT register is cleared. If CAP.SALP is cleared to 0, software shall treat this bit as reserved. 26 Aggressive Link Power Management Enable (ALPE)--R/W. When set, the PCH will aggressively enter a lower link power state (partial or slumber) based upon the setting of the ASP bit (bit 27). Datasheet SATA Controller Registers (D31:F2) Bit Description 25 Drive LED on ATAPI Enable (DLAE)--R/W. When set, the PCH will drive the LED pin active for ATAPI commands (PxCLB[CHz.A] set) in addition to ATA commands. When cleared, the PCH will only drive the LED pin active for ATA commands. See Section 5.16.9 for details on the activity LED. 24 Device is ATAPI (ATAPI)--R/W. When set, the connected device is an ATAPI device. This bit is used by the PCH to control whether or not to generate the desktop LED when commands are active. See Section 5.16.9 for details on the activity LED. 23 Reserved 22 BIOS must set this bit to 0. External SATA Port (ESP)--R/WO. 21 0 = This port supports internal SATA devices only. 1 = This port will be used with an external SATA device and hot plug is supported. When set, CAP.SXS must also be set. This bit is not reset by Function Level Reset. 20 Reserved 19 Mechanical Switch Attached to Port (MPSP)--R/WO. When interlock switches are supported in the platform (CAP.SIS [ABAR+00h:bit 28] set), this indicates whether this particular port has an interlock switch attached. This bit can be used by system software to enable such features as aggressive power management, as disconnects can always be detected regardless of PHY state with an interlock switch. When this bit is set, it is expected that HPCP (bit 18) in this register is also set. The PCH takes no action on the state of this bit - it is for system software only. For example, if this bit is cleared, and an interlock switch toggles, the PCH still treats it as a proper interlock switch event. NOTE: This bit is not reset on a Controller reset or by a Function Level Reset. Hot Plug Capable Port (HPCP)--R/WO. 0 = Port is not capable of Hot-Plug. 1 = Port is Hot-Plug capable. 18 This indicates whether the platform exposes this port to a device which can be HotPlugged. SATA by definition is hot-pluggable, but not all platforms are constructed to allow the device to be removed (it may be screwed into the chassis, for example). This bit can be used by system software to indicate a feature such as "eject device" to the end-user. The PCH takes no action on the state of this bit--it is for system software only. For example, if this bit is cleared, and a Hot-Plug event occurs, the PCH still treats it as a proper Hot-Plug event. NOTE: This bit is not reset on a Controller reset or by a Function Level Reset. 17 Datasheet BIOS must set this bit to 0. 16 Reserved 15 Controller Running (CR)--RO. When this bit is set, the DMA engines for a port are running. See section 5.2.2 of the Serial ATA AHCI Specification for details on when this bit is set and cleared by the PCH. 14 FIS Receive Running (FR)--RO. When set, the FIS Receive DMA engine for the port is running. See section 12.2.2 of the Serial ATA AHCI Specification for details on when this bit is set and cleared by the PCH. 629 SATA Controller Registers (D31:F2) Bit 13 Description Interlock Switch State (ISS)--RO. For systems that support interlock switches (using CAP.SIS [ABAR+00h:bit 28]), if an interlock switch exists on this port (using ISP in this register), this bit indicates the current state of the interlock switch. A 0 indicates the switch is closed, and a 1 indicates the switch is opened. For systems that do not support interlock switches, or if an interlock switch is not attached to this port, this bit reports 0. 12:8 7:5 4 Current Command Slot (CCS)--RO. Indicates the current command slot the PCH is processing. This field is valid when the ST bit is set in this register, and is constantly updated by the PCH. This field can be updated as soon as the PCH recognizes an active command slot, or at some point soon after when it begins processing the command. This field is used by software to determine the current command issue location of the PCH. In queued mode, software shall not use this field, as its value does not represent the current command being executed. Software shall only use PxCI and PxSACT when running queued commands. Reserved FIS Receive Enable (FRE)--R/W. When set, the PCH may post received FISes into the FIS receive area pointed to by PxFB (ABAR+108h/188h/208h/288h) and PxFBU (ABAR+10Ch/18Ch/20Ch/28Ch). When cleared, received FISes are not accepted by the PCH, except for the first D2H (device-to-host) register FIS after the initialization sequence. System software must not set this bit until PxFB (PxFBU) have been programmed with a valid pointer to the FIS receive area, and if software wishes to move the base, this bit must first be cleared, and software must wait for the FR bit (bit 14) in this register to be cleared. 3 Command List Override (CLO)--R/W. Setting this bit to 1 causes PxTFD.STS.BSY and PxTFD.STS.DRQ to be cleared to 0. This allows a software reset to be transmitted to the device regardless of whether the BSY and DRQ bits are still set in the PxTFD.STS register. The Controller sets this bit to 0 when PxTFD.STS.BSY and PxTFD.STS.DRQ have been cleared to 0. A write to this register with a value of 0 shall have no effect. This bit shall only be set to 1 immediately prior to setting the PxCMD.ST bit to 1 from a previous value of 0. Setting this bit to 1 at any other time is not supported and will result in indeterminate behavior. Software must wait for CLO to be cleared to 0 before setting PxCMD.ST to 1. 2 Power On Device (POD)--RO. Cold presence detect not supported. Defaults to 1. Spin-Up Device (SUD)--R/W / RO. This bit is R/W and defaults to 0 for systems that support staggered spin-up (R/W when CAP.SSS (ABAR+00h:bit 27) is 1). Bit is RO 1 for systems that do not support staggered spin-up (when CAP.SSS is 0). 1 0 = No action. 1 = On an edge detect from 0 to 1, the PCH starts a COMRESET initialization sequence to the device. Clearing this bit to 0 does not cause any OOB signal to be sent on the interface. When this bit is cleared to 0 and PxSCTL.DET=0h, the Controller will enter listen mode. 0 Start (ST)--R/W. When set, the PCH may process the command list. When cleared, the PCH may not process the command list. Whenever this bit is changed from a 0 to a 1, the PCH starts processing the command list at entry 0. Whenever this bit is changed from a 1 to a 0, the PxCI register is cleared by the PCH upon the PCH putting the controller into an idle state. See Section 12.2.1 of the Serial ATA AHCI Specification for important restrictions on when ST can be set to 1. 630 Datasheet SATA Controller Registers (D31:F2) 14.4.2.8 PxTFD--Port [5:0] Task File Data Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: 0000007Fh + + + + + + + 120h Attribute: 1A0h 220h (Desktop Only) 2A0h (Desktop Only) 320h 3A0h 420h Size: RO 32 bits This is a 32-bit register that copies specific fields of the task file when FISes are received. The FISes that contain this information are: D2H Register FIS,PIO Setup FIS and Set Device Bits FIS Bit 31:16 15:8 Description Reserved Error (ERR)--RO. Contains the latest copy of the task file error register. Status (STS)--RO. Contains the latest copy of the task file status register. Fields of note in this register that affect AHCI. 7:0 14.4.2.9 Bit Field 7 BSY Indicates the interface is busy Definition 6:4 N/A Not applicable 3 DRQ Indicates a data transfer is requested 2:1 N/A Not applicable 0 ERR Indicates an error during the transfer PxSIG--Port [5:0] Signature Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: FFFFFFFFh + + + + + + + 124h Attribute: 1A4h 224h (Desktop Only) 2A4h (Desktop Only) 324h 3A4h 424h Size: RO 32 bits This is a 32-bit register which contains the initial signature of an attached device when the first D2H Register FIS is received from that device. It is updated once after a reset sequence. Bit Description Signature (SIG)--RO. Contains the signature received from a device on the first D2H register FIS. The bit order is as follows: Bit 31:0 31:24 LBA High Register 23:16 LBA Mid Register 15:8 LBA Low Register 7:0 Datasheet Field Sector Count Register 631 SATA Controller Registers (D31:F2) 14.4.2.10 PxSSTS--Port [5:0] Serial ATA Status Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: 00000000h + + + + + + + 128h Attribute: 1A8h 228h (Desktop Only) 2A8h (Desktop Only) 328h 3A8h 428h Size: RO 32 bits This is a 32-bit register that conveys the current state of the interface and host. The PCH updates it continuously and asynchronously. When the PCH transmits a COMRESET to the device, this register is updated to its reset values. Bit 31:12 Description Reserved Interface Power Management (IPM)--RO. Indicates the current interface state: Value 11:8 Description 0h Device not present or communication not established 1h Interface in active state 2h Interface in PARTIAL power management state 6h Interface in SLUMBER power management state All other values reserved. Current Interface Speed (SPD)--RO. Indicates the negotiated interface communication speed. Value 7:4 Description 0h Device not present or communication not established 1h Generation 1 communication rate negotiated 2h Generation 2 communication rate negotiated All other values reserved. The PCH supports Gen 1 communication rates (1.5 Gb/s) and Gen 2 rates (3.0 Gb/s). Device Detection (DET)--RO. Indicates the interface device detection and Phy state: Value 3:0 Description 0h No device detected and Phy communication not established 1h Device presence detected but Phy communication not established 3h Device presence detected and Phy communication established 4h Phy in offline mode as a result of the interface being disabled or running in a BIST loopback mode All other values reserved. 632 Datasheet SATA Controller Registers (D31:F2) 14.4.2.11 PxSCTL--Port [5:0] Serial ATA Control Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: 00000004h + + + + + + + 12Ch Attribute: 1ACh 22Ch (Desktop Only) 2ACh (Desktop Only) 32Ch 3ACh 42Ch Size: R/W, RO 32 bits This is a 32-bit read-write register by which software controls SATA capabilities. Writes to the SControl register result in an action being taken by the PCH or the interface. Reads from the register return the last value written to it. Bit Description 31:16 Reserved 15:12 Select Power Management (SPM)--R/W. This field is not used by AHCI Interface Power Management Transitions Allowed (IPM)--R/W. Indicates which power states the PCH is allowed to transition to: Value 11:8 Description 0h No interface restrictions 1h Transitions to the PARTIAL state disabled 2h Transitions to the SLUMBER state disabled 3h Transitions to both PARTIAL and SLUMBER states disabled All other values reserved Speed Allowed (SPD)--R/W. Indicates the highest allowable speed of the interface. This speed is limited by the CAP.ISS (ABAR+00h:bit 23:20) field. Value Description 7:4 0h No speed negotiation restrictions 1h Limit speed negotiation to Generation 1 communication rate 2h Limit speed negotiation to Generation 2 communication rate The PCH Supports Gen 1 communication rates (1.5 Gb/s) and Gen 2 rates (3.0 Gb/s). Device Detection Initialization (DET)--R/W. Controls the PCH's device detection and interface initialization. Value 3:0 Description 0h No device detection or initialization action requested 1h Perform interface communication initialization sequence to establish communication. This is functionally equivalent to a hard reset and results in the interface being reset and communications re-initialized 4h Disable the Serial ATA interface and put Phy in offline mode All other values reserved. When this field is written to a 1h, the PCH initiates COMRESET and starts the initialization process. When the initialization is complete, this field shall remain 1h until set to another value by software. This field may only be changed to 1h or 4h when PxCMD.ST is 0. Changing this field while the PCH is running results in undefined behavior. NOTE: It is permissible to implement any of the Serial ATA defined behaviors for transmission of COMRESET when DET=1h. Datasheet 633 SATA Controller Registers (D31:F2) 14.4.2.12 PxSERR--Port [5:0] Serial ATA Error Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: 00000000h + + + + + + + 130h Attribute: 1B0h 230h (Desktop Only) 2B0h (Desktop Only) 330h 3B0h 430h Size: R/WC 32 bits Bits 26:16 of this register contain diagnostic error information for use by diagnostic software in validating correct operation or isolating failure modes. Bits 11:0 contain error information used by host software in determining the appropriate response to the error condition. If one or more of bits 11:8 of this register are set, the controller will stop the current transfer. Bit 31:27 Reserved 26 Exchanged (X)--R/WC. When set to 1, this bit indicates that a change in device presence has been detected since the last time this bit was cleared. This bit shall always be set to 1 anytime a COMINIT signal is received. This bit is reflected in the P0IS.PCS bit. 25 Unrecognized FIS Type (F)--R/WC. Indicates that one or more FISs were received by the Transport layer with good CRC, but had a type field that was not recognized. 24 Transport state transition error (T)--R/WC. Indicates that an error has occurred in the transition from one state to another within the Transport layer since the last time this bit was cleared. 23 Link Sequence Error (S)--R/WC: Indicates that one or more Link state machine error conditions was encountered. The Link Layer state machine defines the conditions under which the link layer detects an erroneous transition. 22 Handshake (H)--R/WC. Indicates that one or more R_ERR handshake response was received in response to frame transmission. Such errors may be the result of a CRC error detected by the recipient, a disparity or 8b/10b decoding error, or other error condition leading to a negative handshake on a transmitted frame. 21 CRC Error (C)--R/WC. Indicates that one or more CRC errors occurred with the Link Layer. 20 Disparity Error (D)--R/WC. This field is not used by AHCI. 19 10b to 8b Decode Error (B)--R/WC. Indicates that one or more 10b to 8b decoding errors occurred. 18 Comm Wake (W)--R/WC. Indicates that a Comm Wake signal was detected by the Phy. 17 Phy Internal Error (I)--R/WC. Indicates that the Phy detected some internal error. 16 PhyRdy Change (N)--R/WC. When set to 1, this bit indicates that the internal PhyRdy signal changed state since the last time this bit was cleared. In the PCH, this bit will be set when PhyRdy changes from a 0 -> 1 or a 1 -> 0. The state of this bit is then reflected in the PxIS.PRCS interrupt status bit and an interrupt will be generated if enabled. Software clears this bit by writing a 1 to it. 15:12 11 634 Description Reserved Internal Error (E)--R/WC. The SATA controller failed due to a master or target abort when attempting to access system memory. Datasheet SATA Controller Registers (D31:F2) Bit Description Protocol Error (P)--R/WC. A violation of the Serial ATA protocol was detected. 10 9 Persistent Communication or Data Integrity Error (C)--R/WC. A communication error that was not recovered occurred that is expected to be persistent. Persistent communications errors may arise from faulty interconnect with the device, from a device that has been removed or has failed, or a number of other causes. 8 Transient Data Integrity Error (T)--R/WC. A data integrity error occurred that was not recovered by the interface. 7:2 14.4.2.13 NOTE: The PCH does not set this bit for all protocol violations that may occur on the SATA link. Reserved 1 Recovered Communications Error (M)--R/WC. Communications between the device and host was temporarily lost but was re-established. This can arise from a device temporarily being removed, from a temporary loss of Phy synchronization, or from other causes and may be derived from the PhyNRdy signal between the Phy and Link layers. 0 Recovered Data Integrity Error (I)--R/WC. A data integrity error occurred that was recovered by the interface through a retry operation or other recovery action. PxSACT--Port [5:0] Serial ATA Active Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: 00000000h + + + + + + + 134h Attribute: 1B4h 234h (Desktop Only) 2B4h (Desktop Only) 334h 3B4h 434h Size: R/W 32 bits Bit Description 31:0 Device Status (DS)--R/W. System software sets this bit for SATA queuing operations prior to setting the PxCI.CI bit in the same command slot entry. This field is cleared using the Set Device Bits FIS. This field is also cleared when PxCMD.ST (ABAR+118h/198h/218h/298h:bit 0) is cleared by software, and as a result of a COMRESET or SRST. Datasheet 635 SATA Controller Registers (D31:F2) 14.4.2.14 PxCI--Port [5:0] Command Issue Register (D31:F2) Address Offset: Port 0: ABAR Port 1: ABAR Port 2: ABAR Port 3: ABAR Port 4: ABAR Port 5: ABAR Port 6: ABAR Default Value: 00000000h Bit 31:0 + + + + + + + 138h Attribute: 1B8h 238h (Desktop Only) 2B8h (Desktop Only) 338h 3B8h 438h Size: R/W 32 bits Description Commands Issued (CI)--R/W. This field is set by software to indicate to the PCH that a command has been built-in system memory for a command slot and may be sent to the device. When the PCH receives a FIS which clears the BSY and DRQ bits for the command, it clears the corresponding bit in this register for that command slot. Bits in this field shall only be set to 1 by software when PxCMD.ST is set to 1. This field is also cleared when PxCMD.ST (ABAR+118h/198h/218h/298h:bit 0) is cleared by software. 636 Datasheet SATA Controller Registers (D31:F5) 15 SATA Controller Registers (D31:F5) 15.1 PCI Configuration Registers (SATA-D31:F5) Note: Address locations that are not shown should be treated as Reserved. All of the SATA registers are in the core well. None of the registers can be locked. Table 15-1. SATA Controller PCI Register Address Map (SATA-D31:F5) (Sheet 1 of 2) Datasheet Offset Mnemonic 00h-01h VID 02h-03h DID 04h-05h PCICMD 06h-07h PCISTS 08h RID 09h PI 0Ah Register Name Default Type Vendor Identification 8086h RO Device Identification See register description RO PCI Command 0000h R/W, RO PCI Status 02B0h R/WC, RO Revision Identification See register description RO Programming Interface See register description See register description SCC Sub Class Code See register description See register description 0Bh BCC Base Class Code 01h RO 0Dh PMLT Primary Master Latency Timer 00h RO 10h-13h PCMD_BAR Primary Command Block Base Address 00000001h R/W, RO 14h-17h PCNL_BAR Primary Control Block Base Address 00000001h R/W, RO 18h-1Bh SCMD_BAR Secondary Command Block Base Address 00000001h R/W, RO 1Ch-1Fh SCNL_BAR Secondary Control Block Base Address 00000001h R/W, RO 20h-23h BAR Legacy Bus Master Base Address 00000001h R/W, RO 24h-27h SIDPBA Serial ATA Index / Data Pair Base Address 00000000h See register description 2Ch-2Dh SVID Subsystem Vendor Identification 0000h R/WO 2Eh-2Fh SID Subsystem Identification 0000h R/WO 34h CAP Capabilities Pointer 80h RO 3Ch INT_LN Interrupt Line 00h R/W 3Dh INT_PN Interrupt Pin See register description RO 40h-41h IDE_TIM Primary IDE Timing Register 0000h R/W 42h-43h IDE_TIM Secondary IDE Timing Registers 0000h R/W 637 SATA Controller Registers (D31:F5) Table 15-1. SATA Controller PCI Register Address Map (SATA-D31:F5) (Sheet 2 of 2) Offset Mnemonic 48h SDMA_CNT 4Ah-4Bh SDMA_TIM 54h-57h IDE_CONFIG 70h-71h Register Name Default Type Synchronous DMA Control 00h R/W Synchronous DMA Timing 0000h R/W DE I/O Configuration 00000000h R/W PID PCI Power Management Capability ID See register description RO 72h-73h PC PCI Power Management Capabilities 4003h RO 74h-75h PMCS PCI Power Management Control and Status 0008h R/W, RO, R/WC 90h MAP Address Map 00h R/W 92h-93h PCS Port Control and Status 0000h R/W, RO, R/WC A8h-ABh SCAP0 SATA Capability Register 0 0010B012h RO ACh-AFh SCAP1 SATA Capability Register 1 00000048h RO B0h-B1h FLRCID FLR Capability ID 0009h RO B2h-B3h FLRCLV FLR Capability Length and Value 2006h RO B4h-B5h FLRCTRL FLR Control 0000h R/W, RO C0h ATC APM Trapping Control 00h R/W C4h ATS ATM Trapping Status 00h R/WC NOTE: The PCH SATA controller is not arbitrated as a PCI device; therefore, it does not need a master latency timer. 15.1.1 VID--Vendor Identification Register (SATA--D31:F5) Offset Address: 00h-01h Default Value: 8086h Lockable: No Bit 15:0 15.1.2 RO 16 bit Core Description Vendor ID--RO. This is a 16-bit value assigned to Intel. Intel VID = 8086h DID--Device Identification Register (SATA--D31:F5) Offset Address: 02h-03h Default Value: See bit description Lockable: No Bit 15:0 638 Attribute: Size: Power Well: Attribute: Size: Power Well: RO 16 bit Core Description Device ID--RO. This is a 16-bit value assigned to the PCH SATA controller. NOTE: The value of this field will change dependent upon the value of the MAP Register. See Section and Section 15.1.28 Datasheet SATA Controller Registers (D31:F5) 15.1.3 PCICMD--PCI Command Register (SATA-D31:F5) Address Offset: 04h-05h Default Value: 0000h Bit 15:11 Attribute: Size: RO, R/W 16 bits Description Reserved Interrupt Disable--R/W. This disables pin-based INTx# interrupts. This bit has no effect on MSI operation. 10 0 = Internal INTx# messages are generated if there is an interrupt and MSI is not enabled. 1 = Internal INTx# messages will not be generated. 9 Fast Back to Back Enable (FBE)--RO. Reserved as 0. 8 SERR# Enable (SERR_EN)--RO. Reserved as 0. 7 Wait Cycle Control (WCC)--RO. Reserved as 0. Parity Error Response (PER)--R/W. 6 0 = Disabled. SATA controller will not generate PERR# when a data parity error is detected. 1 = Enabled. SATA controller will generate PERR# when a data parity error is detected. 5 VGA Palette Snoop (VPS)--RO. Reserved as 0. 4 Postable Memory Write Enable (PMWE)--RO. Reserved as 0. 3 Special Cycle Enable (SCE)--RO. Reserved as 0. 2 Bus Master Enable (BME)--R/W. This bit controls the PCH ability to act as a PCI master for IDE Bus Master transfers. This bit does not impact the generation of completions for split transaction commands. 1 Memory Space Enable (MSE)--RO. This controller does not support AHCI; therefore, no memory space is required. I/O Space Enable (IOSE)--R/W. This bit controls access to the I/O space registers. 0 Datasheet 0 = Disables access to the Legacy or Native IDE ports (both Primary and Secondary) as well as the Bus Master I/O registers. 1 = Enable. Note that the Base Address register for the Bus Master registers should be programmed before this bit is set. 639 SATA Controller Registers (D31:F5) 15.1.4 PCISTS--PCI Status Register (SATA-D31:F5) Address Offset: 06h-07h Default Value: 02B0h Note: Attribute: Size: R/WC, RO 16 bits For the writable bits, software must write a 1 to clear bits that are set. Writing a 0 to the bit has no effect. Bit Description Detected Parity Error (DPE)--R/WC. 15 0 = No parity error detected by SATA controller. 1 = SATA controller detects a parity error on its interface. 14 Signaled System Error (SSE)--RO. Reserved as 0. Received Master Abort (RMA)--R/WC. 13 0 = Master abort Not generated. 1 = SATA controller, as a master, generated a master abort. 12 Reserved 11 Signaled Target Abort (STA)--RO. Reserved as 0. 10:9 DEVSEL# Timing Status (DEV_STS)--RO. 01 = Hardwired; Controls the device select time for the SATA controller's PCI interface. 8 Data Parity Error Detected (DPED)--R/WC. For PCH, this bit can only be set on read completions received from SiBUS where there is a parity error. 1 = SATA controller, as a master, either detects a parity error or sees the parity error line asserted, and the parity error response bit (bit 6 of the command register) is set. 7 Fast Back to Back Capable (FB2BC)--RO. Reserved as 1. 6 User Definable Features (UDF)--RO. Reserved as 0. 5 66MHz Capable (66MHZ_CAP)--RO. Reserved as 1. 4 Capabilities List (CAP_LIST)--RO. This bit indicates the presence of a capabilities list. The minimum requirement for the capabilities list must be PCI power management for the SATA controller. Interrupt Status (INTS)--RO. Reflects the state of INTx# messages, IRQ14 or IRQ15. 3 2:0 15.1.5 0 = Interrupt is cleared (independent of the state of Interrupt Disable bit in the command register [offset 04h]). 1 = Interrupt is to be asserted Reserved RID--Revision Identification Register (SATA--D31:F5) Offset Address: 08h Default Value: See bit description Bit 7:0 640 Attribute: Size: RO 8 bits Description Intel(R) Revision ID--RO. See the 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Revision ID Register Datasheet SATA Controller Registers (D31:F5) 15.1.6 PI--Programming Interface Register (SATA-D31:F5) Address Offset: 09h Default Value: 85h Attribute: Size: RO 8 bits When SCC = 01h Bit 7 6:4 3 Description This read-only bit is a 1 to indicate that the PCH supports bus master operation Reserved Secondary Mode Native Capable (SNC)--RO. Indicates whether or not the secondary channel has a fixed mode of operation. 0 = Indicates the mode is fixed and is determined by the (read-only) value of bit 2. This bit will always return 0. Secondary Mode Native Enable (SNE)--RO. 2 Determines the mode that the secondary channel is operating in. 1 = Secondary controller operating in native PCI mode. This bit will always return 1. 1 Primary Mode Native Capable (PNC)--RO. Indicates whether or not the primary channel has a fixed mode of operation. 0 = Indicates the mode is fixed and is determined by the (read-only) value of bit 0. This bit will always return 0. Primary Mode Native Enable (PNE)--RO. 0 Determines the mode that the primary channel is operating in. 1 = Primary controller operating in native PCI mode. This bit will always return 1. 15.1.7 SCC--Sub Class Code Register (SATA-D31:F5) Address Offset: 0Ah Default Value: 01h Bit 7:0 15.1.8 RO 8 bits Description Sub Class Code (SCC)--RO. The value of this field determines whether the controller supports legacy IDE mode. BCC--Base Class Code Register (SATA-D31:F5SATA-D31:F5) Address Offset: 0Bh Default Value: 01h Bit 7:0 Datasheet Attribute: Size: Attribute: Size: RO 8 bits Description Base Class Code (BCC)--RO. 01h = Mass storage device 641 SATA Controller Registers (D31:F5) 15.1.9 PMLT--Primary Master Latency Timer Register (SATA-D31:F5) Address Offset: 0Dh Default Value: 00h Bit Attribute: Size: RO 8 bits Description Master Latency Timer Count (MLTC)--RO. 7:0 15.1.10 00h = Hardwired. The SATA controller is implemented internally, and is not arbitrated as a PCI device, so it does not need a Master Latency Timer. PCMD_BAR--Primary Command Block Base Address Register (SATA-D31:F5) Address Offset: 10h-13h Default Value: 00000001h Attribute: Size: R/W, RO 32 bits . Bit 31:16 15:3 2:1 0 Description Reserved Base Address--R/W. This field provides the base address of the I/O space (8 consecutive I/O locations). Reserved Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate a request for I/O space. NOTE: This 8-byte I/O space is used in native mode for the Primary Controller's Command Block. 15.1.11 PCNL_BAR--Primary Control Block Base Address Register (SATA-D31:F5) Address Offset: 14h-17h Default Value: 00000001h Attribute: Size: R/W, RO 32 bits . Bit 31:16 15:2 Description Reserved Base Address--R/W. This field provides the base address of the I/O space (4 consecutive I/O locations). 1 Reserved 0 Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate a request for I/O space. NOTE: This 4-byte I/O space is used in native mode for the Primary Controller's Command Block. 642 Datasheet SATA Controller Registers (D31:F5) 15.1.12 SCMD_BAR--Secondary Command Block Base Address Register (IDE D31:F5) Address Offset: 18h-1Bh Default Value: 00000001h Bit 31:16 15:3 2:1 0 Attribute: Size: R/W, RO 32 bits Description Reserved Base Address--R/W. This field provides the base address of the I/O space (8 consecutive I/O locations). Reserved Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate a request for I/O space. NOTE: This 8-byte I/O space is used in native mode for the Secondary Controller's Command Block. 15.1.13 SCNL_BAR--Secondary Control Block Base Address Register (IDE D31:F5) Address Offset: 1Ch-1Fh Default Value: 00000001h Bit 31:16 15:2 Attribute: Size: R/W, RO 32 bits Description Reserved Base Address--R/W. This field provides the base address of the I/O space (4 consecutive I/O locations). 1 Reserved 0 Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate a request for I/O space. NOTE: This 4-byte I/O space is used in native mode for the Secondary Controller's Command Block. Datasheet 643 SATA Controller Registers (D31:F5) 15.1.14 BAR--Legacy Bus Master Base Address Register (SATA-D31:F5) Address Offset: 20h-23h Default Value: 00000001h Attribute: Size: R/W, RO 32 bits The Bus Master IDE interface function uses Base Address register 5 to request a 16byte IO space to provide a software interface to the Bus Master functions. Only 12 bytes are actually used (6 bytes for primary, 6 bytes for secondary). Only bits [15:4] are used to decode the address. Bit 31:16 15:5 4 3:1 0 15.1.15 Description Reserved Base Address--R/W. This field provides the base address of the I/O space (16 consecutive I/O locations). Base Address 4 (BA4)--R/W. When SCC is 01h, this bit will be R/W resulting in requesting 16B of I/O space. Reserved Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate a request for I/O space. SIDPBA--SATA Index/Data Pair Base Address Register (SATA-D31:F5) Address Offset: 24h-27h Default Value: 00000000h Attribute: Size: R/W, RO 32 bits When SCC is 01h When the programming interface is IDE, the register represents an I/O BAR allocating 16B of I/O space for the I/O mapped registers defined in Section 15.3. Note that although 16B of locations are allocated, some maybe reserved. Bit 31:16 15:4 3:1 0 644 Description Reserved Base Address (BA)--R/W. Base address of register I/O space Reserved Resource Type Indicator (RTE)--RO. Hardwired to 1 to indicate a request for I/O space. Datasheet SATA Controller Registers (D31:F5) 15.1.16 SVID--Subsystem Vendor Identification Register (SATA-D31:F5) Address Offset: Default Value: Lockable: Function Level Reset: 15.1.17 2Ch-2Dh 0000h No No Attribute: Size: Power Well: Bit Description 15:0 Subsystem Vendor ID (SVID)--R/WO. Value is written by BIOS. No hardware action taken on this value. SID--Subsystem Identification Register (SATA-D31:F5) Address Offset: 2Eh-2Fh Default Value: 0000h Lockable: No 15.1.18 Attribute: Size: Power Well: Description 15:0 Subsystem ID (SID)--R/WO. Value is written by BIOS. No hardware action taken on this value. CAP--Capabilities Pointer Register (SATA-D31:F5) Attribute: Size: Description 7:0 Capabilities Pointer (CAP_PTR)--RO. Indicates that the first capability pointer offset is 70h if the Sub Class Code (SCC) (Dev 31:F2:0Ah) is configure as IDE mode (value of 01). INT_LN--Interrupt Line Register (SATA-D31:F5) Bit 7:0 Attribute: Size: R/W 8 bits Description Interrupt Line--R/W. This field is used to communicate to software the interrupt line that the interrupt pin is connected to. These bits are not reset by FLR. INT_PN--Interrupt Pin Register (SATA-D31:F5) Address Offset: 3Dh Default Value: See Register Description Bit 7:0 Datasheet RO 8 bits Bit Address Offset: 3Ch Default Value: 00h Function Level Reset: No 15.1.20 R/WO 16 bits Core Bit Address Offset: 34h Default Value: 70h 15.1.19 R/WO 16 bits Core Attribute: Size: RO 8 bits Description Interrupt Pin--RO. This reflects the value of D31IP.SIP1 (Chipset Config Registers:Offset 3100h:bits 11:8). 645 SATA Controller Registers (D31:F5) 15.1.21 IDE_TIM--IDE Timing Register (SATA-D31:F5) Address Offset: Primary: 40h-41h Secondary: 42h-43h Default Value: 0000h Note: 15 16 bits Description IDE Decode Enable (IDE)--R/W. Individually enable/disable the Primary or Secondary decode. 0 = Disable. 1 = Enables the PCH to decode the associated Command Block and Control Block. IDE_TIM Field 2--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 11:10 Reserved IDE_TIM Field 1--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. SDMA_CNT--Synchronous DMA Control Register (SATA-D31:F5) Address Offset: 48h Default Value: 00h Attribute: Size: R/W 8 bits This register is R/W to maintain software compatibility. These bits have no effect on hardware. Bit 646 Size: 14:12 9:0 Note: R/W Bits 14:12 and 9:0 of this register are R/W to maintain software compatibility. These bits have no effect on hardware. Bit 15.1.22 Attribute: Description 7:4 Reserved 3:0 SDMA_CNT Field 1--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. Datasheet SATA Controller Registers (D31:F5) 15.1.23 SDMA_TIM--Synchronous DMA Timing Register (SATA-D31:F5) Address Offset: 4Ah-4Bh Default Value: 0000h Note: 15:10 Description Reserved 9:8 SDMA_TIM Field 2--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 7:2 Reserved 1:0 SDMA_TIM Field 1--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. IDE_CONFIG--IDE I/O Configuration Register (SATA-D31:F5) Address Offset: 54h-57h Default Value: 00000000h Note: Attribute: Size: R/W 32 bits This register is R/W to maintain software compatibility. These bits have no effect on hardware. Bit Description 31:24 Reserved 23:16 IDE_CONFIG Field 6--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 15 Reserved 14 IDE_CONFIG Field 5--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 13 Reserved 12 IDE_CONFIG Field 4--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 11:8 7:4 Datasheet R/W 16 bits This register is R/W to maintain software compatibility. These bits have no effect on hardware. Bit 15.1.24 Attribute: Size: Reserved IDE_CONFIG Field 3--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 3 Reserved 2 IDE_CONFIG Field 2--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 1 Reserved 0 IDE_CONFIG Field 1--R/W. This field is R/W to maintain software compatibility. This field has no effect on hardware. 647 SATA Controller Registers (D31:F5) 15.1.25 PID--PCI Power Management Capability Identification Register (SATA-D31:F5) Address Offset: 70h-71h Default Value: B001h Bits Attribute: Size: RO 16 bits Description Next Capability (NEXT)--RO. 15:8 7:0 15.1.26 When SCC is 01h, this field will be B0h indicating the next item is FLR Capability Pointer in the list. Capability ID (CID)--RO. Indicates that this pointer is a PCI power management. PC--PCI Power Management Capabilities Register (SATA-D31:F5) Address Offset: 72h-73h Default Value: 4003h Attribute: Size: RO 16 bits f Bits Description 15:11 PME Support (PME_SUP)--RO. By default with SCC = 01h, the default value of 00000 indicates no PME support in IDE mode. 10 9 8:6 648 D2 Support (D2_SUP)--RO. Hardwired to 0. The D2 state is not supported D1 Support (D1_SUP)--RO. Hardwired to 0. The D1 state is not supported Auxiliary Current (AUX_CUR)--RO. PME# from D3COLD state is not supported, therefore this field is 000b. 5 Device Specific Initialization (DSI)--RO. Hardwired to 0 to indicate that no devicespecific initialization is required. 4 Reserved 3 PME Clock (PME_CLK)--RO. Hardwired to 0 to indicate that PCI clock is not required to generate PME#. 2:0 Version (VER)--RO. Hardwired to 011 to indicates support for Revision 1.2 of the PCI Power Management Specification. Datasheet SATA Controller Registers (D31:F5) 15.1.27 PMCS--PCI Power Management Control and Status Register (SATA-D31:F5) Address Offset: 74h-75h Attribute: Default Value: 0008h Size: Function Level Reset:No (Bits 8 and 15 only) Bits 15 RO, R/W, R/WC 16 bits Description PME Status (PMES)--R/WC. Bit is set when a PME event is to be requested, and if this bit and PMEE is set, a PME# will be generated from the SATA controller. NOTE: When SCC=01h this bit will be RO 0. Software is advised to clear PMEE together with PMES prior to changing SCC through MAP.SMS. This bit is not reset by Function Level Reset. 14:9 8 Reserved PME Enable (PMEE)--R/W. When SCC is not 01h, this bit R/W. When set, the SATA controller generates PME# form D3HOT on a wake event. NOTE: When SCC=01h this bit will be RO 0. Software is advised to clear PMEE together with PMES prior to changing SCC through MAP.SMS. This bit is not reset by Function Level Reset. 7:4 Reserved No Soft Reset (NSFRST)--RO. These bits are used to indicate whether devices transitioning from D3HOT state to D0 state will perform an internal reset. 0 = Device transitioning from D3HOT state to D0 state perform an internal reset. 1 = Device transitioning from D3HOT state to D0 state do not perform an internal reset. 3 Configuration content is preserved. Upon transition from the D3HOT state to D0 state initialized state, no additional operating system intervention is required to preserve configuration context beyond writing to the PowerState bits. Regardless of this bit, the controller transition from D3HOT state to D0 state by a system or bus segment reset will return to the state D0 uninitialized with only PME context preserved if PME is supported and enabled. 2 Reserved Power State (PS)--R/W. These bits are used both to determine the current power state of the SATA controller and to set a new power state. 1:0 00 = D0 state 11 = D3HOT state When in the D3HOT state, the controller's configuration space is available, but the I/O and memory spaces are not. Additionally, interrupts are blocked. Datasheet 649 SATA Controller Registers (D31:F5) 15.1.28 MAP--Address Map Register (SATA-D31:F5) Address Offset: 90h Default Value: 00h Function Level Reset: No (Bits 9:8 only) Bits 15:8 7:6 Attribute: Size: R/W, R/WO, RO bits Description Reserved SATA Mode Select (SMS)--R/W. Software programs these bits to control the mode in which the SATA Controller should operate. 00b = IDE Mode All other combinations are reserved. 650 5:2 Reserved 1:0 Map Value (MV)--Reserved. Datasheet SATA Controller Registers (D31:F5) 15.1.29 PCS--Port Control and Status Register (SATA-D31:F5) Address Offset: Default Value: Function Level Reset: 92h-93h 0000h No Attribute: Size: R/W, RO 16 bits By default, the SATA ports are set to the disabled state (bits [5:0] = 0). When enabled by software, the ports can transition between the on, partial, and slumber states and can detect devices. When disabled, the port is in the "off" state and cannot detect any devices. If an AHCI-aware or RAID enabled operating system is being booted then system BIOS shall insure that all supported SATA ports are enabled prior to passing control to the OS. Once the AHCI aware OS is booted it becomes the enabling/disabling policy owner for the individual SATA ports. This is accomplished by manipulating a port's PxSCTL and PxCMD fields. Because an AHCI or RAID aware OS will typically not have knowledge of the PxE bits and because the PxE bits act as master on/off switches for the ports, preboot software must insure that these bits are set to 1 prior to booting the OS, regardless as to whether or not a device is currently on the port. Bits 15:10 9 Description Reserved Port 5 Present (P5P)--RO. The status of this bit may change at any time. This bit is cleared when the port is disabled using P1E. This bit is not cleared upon surprise removal of a device. 0 = No device detected. 1 = The presence of a device on Port 1 has been detected. 8 Port 4 Present (P4P)--RO. The status of this bit may change at any time. This bit is cleared when the port is disabled using P0E. This bit is not cleared upon surprise removal of a device. 0 = No device detected. 1 = The presence of a device on Port 0 has been detected. 7:2 Reserved Port 5 Enabled (P5E)--R/W. 1 0 = Disabled. The port is in the `off' state and cannot detect any devices. 1 = Enabled. The port can transition between the on, partial, and slumber states and can detect devices. This bit is read-only 0 when MAP.SPD[1]= 1. Port 4 Enabled (P4E)--R/W. 0 0 = Disabled. The port is in the `off' state and cannot detect any devices. 1 = Enabled. The port can transition between the on, partial, and slumber states and can detect devices. This bit is read-only 0 when MAP.SPD[0]= 1. Datasheet 651 SATA Controller Registers (D31:F5) 15.1.30 SATACR0--SATA Capability Register 0 (SATA-D31:F5) Address Offset: A8h-ABh Default Value: 0010B012h Function Level Reset: No (Bits 15:8 only) Note: Attribute: Size: RO, RWO 32 bits When SCC is 01h this register is read-only 0. . Bit 15.1.31 Description 31:24 Reserved 23:20 Major Revision (MAJREV)--RO. Major revision number of the SATA Capability Pointer implemented. 19:16 Minor Revision (MINREV)--RO. Minor revision number of the SATA Capability Pointer implemented. 15:8 Next Capability Pointer (NEXT)--RWO. Points to the next capability structure. 7:0 Capability ID (CAP)--RO. The value of 12h has been assigned by the PCI SIG to designate the SATA capability pointer. SATACR1--SATA Capability Register 1 (SATA-D31:F5) Address Offset: ACh-AFh Default Value: 00000048h Attribute: Size: RO 32 bits When SCC is 01h this register is read-only 0. . Bit 31:16 15:4 3:0 15.1.32 Description Reserved BAR Offset (BAROFST)--RO. Indicates the offset into the BAR where the index/Data pair are located (in DWord granularity). The index and Data I/O registers are located at offset 10h within the I/O space defined by LBAR (BAR4). A value of 004h indicates offset 10h. BAR Location (BARLOC)--RO. Indicates the absolute PCI Configuration Register address of the BAR containing the Index/Data pair (in DWord granularity). The Index and Data I/O registers reside within the space defined by LBAR (BAR4) in the SATA controller. a value of 8h indicates and offset of 20h, which is LBAR (BAR4). FLRCID--FLR Capability ID Register (SATA-D31:F5) Address Offset: B0h-B1h Default Value: 0009h Attribute: Size: RO 16 bits . Bit Description 15:8 Next Capability Pointer--RO. A value of 00h indicates the final item in the Capability List. Capability ID--RO. The value of this field depends on the FLRCSSECL bit. 7:0 If FLRCSSEL = 0, this field is 13h If FLRCSSEL = 1, this field is 09h, indicating vendor specific capability. 652 Datasheet SATA Controller Registers (D31:F5) 15.1.33 FLRCLV--FLR Capability Length and Value Register (SATA-D31:F5) Address Offset: Default Value: Function Level Reset: B2h-B3h 2006h No (Bits 9:8 only) Attribute: Size: RO, RWO 16 bits When FLRCSSEL = 0, this register is defined as follows: Bit 15:10 Description Reserved 9 FLR Capability--RWO. This field indicates support for Function Level Reset. 8 TXP Capability--RWO. This field indicates support for the Transactions Pending (TXP) bit. TXP must be supported if FLR is supported. 7:0 Capability Length--RO. This field indicates the number of bytes of the Vendor Specific capability as required by the PCI spec. It has the value of 06h for FLR Capability. When FLRCSSEL = 1, this register is defined as follows: Bit 15:12 11:8 7:0 15.1.34 Description Vendor Specific Capability ID--RO. A value of 02h identifies this capability as a Function Level Reset. Capability Version--RO. This field indicates the version of the FLR capability. Capability Length--RO. This field indicates the number of bytes of the Vendor Specific capability as required by the PCI spec. It has the value of 06h for FLR Capability. FLRCTRL--FLR Control Register (SATA-D31:F5) Address Offset: B4h-B5h Default Value: 0000h Bit 15:9 Attribute: Size: R/W, RO 16 bits Description Reserved Transactions Pending (TXP)--RO. 8 7:1 0 Datasheet 0 = Completions for all Non-Posted requests have been received by the controller. 1 = Controller has issued Non-Posted request which has not been completed. Reserved Initiate FLR--R/W. Used to initiate FLR transition. A write of 1 indicates FLR transition. 653 SATA Controller Registers (D31:F5) 15.1.35 ATC--APM Trapping Control Register (SATA-D31:F5) Address Offset: C0h Default Value: 00h Note: Attribute: Size: R/W 8 bits This SATA controller does not support legacy I/O access. Therefore, this register is reserved. Software shall not change the default values of the register; otherwise, the result will be undefined. . Bit 7:0 15.1.36 Description Reserved ATC--APM Trapping Control Register (SATA-D31:F5) Address Offset: C4h Default Value: 00h Note: Attribute: Size: R/WC 8 bits This SATA controller does not support legacy I/O access. Therefore, this register is reserved. Software shall not change the default values of the register; otherwise, the result will be undefined. . Bit 7:0 654 Description Reserved Datasheet SATA Controller Registers (D31:F5) 15.2 Bus Master IDE I/O Registers (D31:F5) The bus master IDE function uses 16 bytes of I/O space, allocated using the BAR register, located in Device 31:Function 2 Configuration space, offset 20h. All bus master IDE I/O space registers can be accessed as byte, word, or DWord quantities. Reading reserved bits returns an indeterminate, inconsistent value, and writes to reserved bits have no affect (but should not be attempted). These registers are only used for legacy operation. Software must not use these registers when running AHCI. The description of the I/O registers is shown in Table 15-2. Table 15-2. Bus Master IDE I/O Register Address Map Datasheet BAR+ Offset Mnemonic 00 BMICP 01 -- 02 BMISP 03 -- 04-07 BMIDP Bus Master IDE Descriptor Table Pointer Primary 08 BMICS Command Register Secondary 09 -- 0Ah BMISS 0Bh -- 0Ch-0Fh BMIDS Register Command Register Primary Reserved Bus Master IDE Status Register Primary Reserved Reserved Bus Master IDE Status Register Secondary Reserved Bus Master IDE Descriptor Table Pointer Secondary Default Type 00h R/W -- RO 00h R/W, R/WC, RO -- RO xxxxxxxx h R/W 00h R/W -- RO 00h R/W, R/WC, RO -- RO xxxxxxxx h R/W 655 SATA Controller Registers (D31:F5) 15.2.1 BMIC[P,S]--Bus Master IDE Command Register (D31:F5) Address Offset: Primary: BAR + 00h Secondary: BAR + 08h Default Value: 00h Bit 7:4 3 2:1 Attribute: R/W Size: 8 bits Description Reserved Read / Write Control (R/WC)--R/W. This bit sets the direction of the bus master transfer: This bit must NOT be changed when the bus master function is active. 0 = Memory reads 1 = Memory writes Reserved Start/Stop Bus Master (START)--R/W. 0 0 = All state information is lost when this bit is cleared. Master mode operation cannot be stopped and then resumed. If this bit is reset while bus master operation is still active (that is, the Bus Master IDE Active bit (D31:F5:BAR + 02h, bit 0) of the Bus Master IDE Status register for that IDE channel is set) and the drive has not yet finished its data transfer (the Interrupt bit in the Bus Master IDE Status register for that IDE channel is not set), the bus master command is said to be aborted and data transferred from the drive may be discarded instead of being written to system memory. 1 = Enables bus master operation of the controller. Bus master operation does not actually start unless the Bus Master Enable bit (D31:F5:04h, bit 2) in PCI configuration space is also set. Bus master operation begins when this bit is detected changing from 0 to 1. The controller will transfer data between the IDE device and memory only when this bit is set. Master operation can be halted by writing a 0 to this bit. NOTE: This bit is intended to be cleared by software after the data transfer is completed, as indicated by either the Bus Master IDE Active bit being cleared or the Interrupt bit of the Bus Master IDE Status register for that IDE channel being set, or both. Hardware does not clear this bit automatically. If this bit is cleared to 0 prior to the DMA data transfer being initiated by the drive in a device to memory data transfer, then the PCH will not send DMAT to terminate the data transfer. Software intervention (such as, sending SRST) is required to reset the interface in this condition. 656 Datasheet SATA Controller Registers (D31:F5) 15.2.2 BMIS[P,S]--Bus Master IDE Status Register (D31:F5) Address Offset: Primary: BAR + 02h Secondary: BAR + 0Ah Default Value: 00h Bit Attribute: R/W, R/WC, RO Size: 8 bits Description PRD Interrupt Status (PRDIS)--R/WC. 7 6 0 = Software clears this bit by writing a 1 to it. 1 = This bit is set when the host controller execution of a PRD that has its PRD_INT bit set. Reserved Drive 0 DMA Capable--R/W. 5 4:3 0 = Not Capable 1 = Capable. Set by device dependent code (BIOS or device driver) to indicate that drive 0 for this channel is capable of DMA transfers, and that the controller has been initialized for optimum performance. The PCH does not use this bit. It is intended for systems that do not attach BMIDE to the PCI bus. Reserved Interrupt--R/WC. 2 0 = Software clears this bit by writing a 1 to it. 1 = Set when a device FIS is received with the `I' bit set, provided that software has not disabled interrupts using the IEN bit of the Device Control Register (see chapter 5 of the Serial ATA Specification, Revision 1.0a). Error--R/WC. 1 0 = Software clears this bit by writing a 1 to it. 1 = This bit is set when the controller encounters a target abort or master abort when transferring data on PCI. Bus Master IDE Active (ACT)--RO. 0 15.2.3 0 = This bit is cleared by the PCH when the last transfer for a region is performed, where EOT for that region is set in the region descriptor. It is also cleared by the PCH when the Start Bus Master bit (D31:F5:BAR+ 00h, bit 0) is cleared in the Command register. When this bit is read as a 0, all data transferred from the drive during the previous bus master command is visible in system memory, unless the bus master command was aborted. 1 = Set by the PCH when the Start bit is written to the Command register. BMID[P,S]--Bus Master IDE Descriptor Table Pointer Register (D31:F5) Address Offset: Primary: BAR + 04h-07h Attribute: Secondary: BAR + 0Ch-0Fh Default Value: All bits undefined Size: 32 bits Bit Description 31:2 Address of Descriptor Table (ADDR)--R/W. The bits in this field correspond to bits [31:2] of the memory location of the Physical Region Descriptor (PRD). The Descriptor Table must be DWord-aligned. The Descriptor Table must not cross a 64-K boundary in memory. 1:0 Datasheet R/W Reserved 657 SATA Controller Registers (D31:F5) 15.3 Serial ATA Index/Data Pair Superset Registers All of these I/O registers are in the core well. They are exposed only when SCC is 01h (that is, IDE programming interface) and the controller is not in combined mode. These are Index/Data Pair registers that are used to access the SerialATA superset registers (SerialATA Status, SerialATA Control and SerialATA Error). The I/O space for these registers is allocated through SIDPBA. Locations with offset from 08h to 0Fh are reserved for future expansion. Software-write operations to the reserved locations shall have no effect while software-read operations to the reserved locations shall return 0. 15.3.1 SINDX--SATA Index Register (D31:F5) Address Offset: SIDPBA + 00h Default Value: 00000000h Note: Attribute: Size: R/W 32 bits These are Index/Data Pair Registers that are used to access the SSTS, SCTL, and SERR. The I/O space for these registers is allocated through SIDPBA. Bit 31:16 Description Reserved Port Index (PIDX)--R/W. This Index field is used to specify the port of the SATA controller at which the port-specific SSTS, SCTL, and SERR registers are located. 15:8 00h = Primary Master (Port 4) 02h = Secondary Master (Port 5) All other values are Reserved. Register Index (RIDX)--R/W. This Index field is used to specify one out of three registers currently being indexed into. 7:0 00h = SSTS 01h = SCTL 02h = SERR All other values are Reserved 15.3.2 SDATA--SATA Index Data Register (D31:F5) Address Offset: SIDPBA + 04h Default Value: All bits undefined Note: Attribute: Size: R/W 32 bits These are Index/Data Pair Registers that are used to access the SSTS, SCTL, and SERR. The I/O space for these registers is allocated through SIDPBA. Bit Description 31:0 Data (DATA)--R/W. This Data register is a "window" through which data is read or written to the memory mapped registers. A read or write to this Data register triggers a corresponding read or write to the memory mapped register pointed to by the Index register. The Index register must be setup prior to the read or write to this Data register. Note that a physical register is not actually implemented as the data is actually stored in the memory mapped registers. Since this is not a physical register, the "default" value is the same as the default value of the register pointed to by Index. 658 Datasheet SATA Controller Registers (D31:F5) 15.3.2.1 PxSSTS--Serial ATA Status Register (D31:F5) Address Offset: Default Value: 00000000h Attribute: Size: RO 32 bits SDATA when SINDX.RIDX is 00h. This is a 32-bit register that conveys the current state of the interface and host. The PCH updates it continuously and asynchronously. When the PCH transmits a COMRESET to the device, this register is updated to its reset values. Bit 31:12 Description Reserved Interface Power Management (IPM)--RO. Indicates the current interface state: Value 11:8 Description 0h Device not present or communication not established 1h Interface in active state 2h Interface in PARTIAL power management state 6h Interface in SLUMBER power management state All other values reserved. Current Interface Speed (SPD)--RO. Indicates the negotiated interface communication speed. Value 7:4 Description 0h Device not present or communication not established 1h Generation 1 communication rate negotiated 2h Generation 2 communication rate negotiated All other values reserved. The PCH Supports Gen 1 communication rates (1.5 Gb/s) and Gen 2 rates (3.0 Gb/s). Device Detection (DET)--RO. Indicates the interface device detection and Phy state: Value 3:0 Description 0h No device detected and Phy communication not established 1h Device presence detected but Phy communication not established 3h Device presence detected and Phy communication established 4h Phy in offline mode as a result of the interface being disabled or running in a BIST loopback mode All other values reserved. Datasheet 659 SATA Controller Registers (D31:F5) 15.3.2.2 PxSCTL--Serial ATA Control Register (D31:F5) Address Offset: Default Value: 00000004h Attribute: Size: R/W, RO 32 bits SDATA when SINDX.RIDX is 01h. This is a 32-bit read-write register by which software controls SATA capabilities. Writes to the SControl register result in an action being taken by the PCH or the interface. Reads from the register return the last value written to it. Bit Description 31:16 Reserved 15:12 Select Power Management (SPM)--RO. This field is not used by AHCI. Interface Power Management Transitions Allowed (IPM)--R/W. Indicates which power states the PCH is allowed to transition to: Value 11:8 Description 0h No interface restrictions 1h Transitions to the PARTIAL state disabled 2h Transitions to the SLUMBER state disabled 3h Transitions to both PARTIAL and SLUMBER states disabled All other values reserved Speed Allowed (SPD)--R/W. Indicates the highest allowable speed of the interface. This speed is limited by the CAP.ISS (ABAR+00h:bit 23:20) field. Value Description 7:4 0h No speed negotiation restrictions 1h Limit speed negotiation to Generation 1 communication rate 2h Limit speed negotiation to Generation 2 communication rate All other values reserved. The PCH Supports Gen 1 communication rates (1.5 Gb/s) and Gen 2 rates (3.0 Gb/s). Device Detection Initialization (DET)--R/W. Controls the PCH's device detection and interface initialization. Value Description 0h No device detection or initialization action requested 1h Perform interface communication initialization sequence to establish communication. This is functionally equivalent to a hard reset and results in the interface being reset and communications re-initialized 4h Disable the Serial ATA interface and put Phy in offline mode 3:0 All other values reserved. 660 Datasheet SATA Controller Registers (D31:F5) 15.3.2.3 PxSERR--Serial ATA Error Register (D31:F5) Address Offset: Default Value: 00000000h Attribute: Size: R/WC 32 bits SDATA when SINDx.RIDX is 02h. Bits 26:16 of this register contain diagnostic error information for use by diagnostic software in validating correct operation or isolating failure modes. Bits 11:0 contain error information used by host software in determining the appropriate response to the error condition. If one or more of bits 11:8 of this register are set, the controller will stop the current transfer. Bit 31:27 Reserved 26 Exchanged (X)--R/WC. When set to 1, this bit indicates that a change in device presence has been detected since the last time this bit was cleared. This bit shall always be set to 1 anytime a COMINIT signal is received. This bit is reflected in the P0IS.PCS bit. 25 Unrecognized FIS Type (F)--R/WC. Indicates that one or more FISs were received by the Transport layer with good CRC, but had a type field that was not recognized. 24 Transport state transition error (T)--R/WC. Indicates that an error has occurred in the transition from one state to another within the Transport layer since the last time this bit was cleared. 23 Link Sequence Error (S)--R/WC: Indicates that one or more Link state machine error conditions was encountered. The Link Layer state machine defines the conditions under which the link layer detects an erroneous transition. 22 Handshake (H)--R/WC. Indicates that one or more R_ERR handshake response was received in response to frame transmission. Such errors may be the result of a CRC error detected by the recipient, a disparity or 8b/10b decoding error, or other error condition leading to a negative handshake on a transmitted frame. 21 CRC Error (C)--R/WC. Indicates that one or more CRC errors occurred with the Link Layer. 20 Disparity Error (D)--R/WC. This field is not used by AHCI. 19 10b to 8b Decode Error (B)--R/WC. Indicates that one or more 10b to 8b decoding errors occurred. 18 Comm Wake (W)--R/WC. Indicates that a Comm Wake signal was detected by the Phy. 17 Phy Internal Error (I)--R/WC. Indicates that the Phy detected some internal error. 16 PhyRdy Change (N)--R/WC. When set to 1, this bit indicates that the internal PhyRdy signal changed state since the last time this bit was cleared. In the PCH, this bit will be set when PhyRdy changes from a 0 -> 1 or a 1 -> 0. The state of this bit is then reflected in the PxIS.PRCS interrupt status bit and an interrupt will be generated if enabled. Software clears this bit by writing a 1 to it. 15:12 Datasheet Description Reserved 11 Internal Error (E)--R/WC. The SATA controller failed due to a master or target abort when attempting to access system memory. 10 Protocol Error (P)--R/WC. A violation of the Serial ATA protocol was detected. NOTE: The PCH does not set this bit for all protocol violations that may occur on the SATA link. 661 SATA Controller Registers (D31:F5) Bit Description 9 Persistent Communication or Data Integrity Error (C)--R/WC. A communication error that was not recovered occurred that is expected to be persistent. Persistent communications errors may arise from faulty interconnect with the device, from a device that has been removed or has failed, or a number of other causes. 8 Transient Data Integrity Error (T)--R/WC. A data integrity error occurred that was not recovered by the interface. 7:2 Reserved 1 Recovered Communications Error (M)--R/WC. Communications between the device and host was temporarily lost but was re-established. This can arise from a device temporarily being removed, from a temporary loss of Phy synchronization, or from other causes and may be derived from the PhyNRdy signal between the Phy and Link layers. 0 Recovered Data Integrity Error (I)--R/WC. A data integrity error occurred that was recovered by the interface through a retry operation or other recovery action. 662 Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16 EHCI Controller Registers (D29:F0, D26:F0) 16.1 USB EHCI Configuration Registers (USB EHCI--D29:F0, D26:F0) Note: Prior to BIOS initialization of the PCH USB subsystem, the EHCI controllers will appear as Function 7. After BIOS initialization, the EHCI controllers will be Function 0. Note: Register address locations that are not shown in Table 16-1 should be treated as Reserved (see Section 9.2 for details). Table 16-1. USB EHCI PCI Register Address Map (USB EHCI--D29:F0, D26:F0) (Sheet 1 of 2) Offset Mnemonic 00h-01h VID 02h-03h DID 04h-05h PCICMD PCI Command 06h-07h PCISTS PCI Status 08h Datasheet RID Register Name Default Value Type Vendor Identification 8086h RO Device Identification See register description RO 0000h R/W, RO 0290h R/WC, RO See register description RO Revision Identification 09h PI Programming Interface 20h RO 0Ah SCC Sub Class Code 03h RO 0Bh BCC Base Class Code 0Ch RO 0Dh PMLT Primary Master Latency Timer 00h RO 0Eh HEADTYP 10h-13h MEM_BASE 2Ch-2Dh SVID 2Eh-2Fh SID Header Type 80h RO 00000000h R/W, RO USB EHCI Subsystem Vendor Identification XXXXh R/W USB EHCI Subsystem Identification XXXXh R/W Memory Base Address 34h CAP_PTR Capabilities Pointer 50h RO 3Ch INT_LN Interrupt Line 00h R/W 3Dh INT_PN Interrupt Pin See register description RO 50h PWR_CAPID 01h RO PCI Power Management Capability ID 51h NXT_PTR1 Next Item Pointer 58h R/W 52h-53h PWR_CAP Power Management Capabilities C9C2h R/W 54h-55h PWR_CNTL_STS Power Management Control/ Status 0000h R/W, R/WC, RO 58h DEBUG_CAPID 0Ah RO Debug Port Capability ID 663 EHCI Controller Registers (D29:F0, D26:F0) Table 16-1. USB EHCI PCI Register Address Map (USB EHCI--D29:F0, D26:F0) (Sheet 2 of 2) Offset Mnemonic 59h NXT_PTR2 Register Name Next Item Pointer #2 Default Value Type 98h RO 5Ah-5Bh DEBUG_BASE Debug Port Base Offset 20A0h RO 60h USB_RELNUM USB Release Number 20h RO 61h FL_ADJ Frame Length Adjustment 20h R/W 62h-63h PWAKE_CAP 01FFh R/W 64h-67h -- Port Wake Capabilities Reserved -- -- 00000001h R/W, RO 68h-6Bh LEG_EXT_CAP USB EHCI Legacy Support Extended Capability 6Ch-6Fh LEG_EXT_CS USB EHCI Legacy Extended Support Control/Status 00000000h R/W, R/WC, RO 70h-73h SPECIAL_SMI Intel Specific USB 2.0 SMI 00000000h R/W, R/WC 74h-7Fh -- 80h ACCESS_CNTL 84h EHCIIR1 88h-8Bh Reserved -- -- 00h R/W EHCI Initialization Register 1 03081F01h R/W, RWL EHCIIR2 EHCI Initialization Register 2 04000010h R/W 98h FLR_CID FLR Capability ID 09h RO 99h FLR_NEXT FLR Next Capability Pointer 00h RO 9Ah-9Bh FLR_CLV FLR Capability Length and Version 2006h RO, R/WO 9Ch FLR_CTRL FLR Control 00h R/W 9Dh FLR_STAT FLR Status 00h RO F4h-F7h EHCIIR3 EHCI Initialization Register 3 00408588h R/W FCh-FFh EHCIIR4 EHCI Initialization Register 4 20591708h R/W Access Control Note: All configuration registers in this section are in the core well and reset by a core well reset and the D3-to-D0 warm reset, except as noted. 16.1.1 VID--Vendor Identification Register (USB EHCI--D29:F0, D26:F0) Offset Address: 00h-01h Default Value: 8086h Bit 15:0 664 Attribute: Size: RO 16 bits Description Vendor ID--RO. This is a 16-bit value assigned to Intel. Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.1.2 DID--Device Identification Register (USB EHCI--D29:F0, D26:F0) Offset Address: 02h-03h Default Value: See bit description 16.1.3 Attribute: Size: RO 16 bits Bit Description 15:0 Device ID--RO. This is a 16-bit value assigned to the PCH USB EHCI controller. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register. PCICMD--PCI Command Register (USB EHCI--D29:F0, D26:F0) Address Offset: 04h-05h Default Value: 0000h Bit 15:11 Attribute: Size: R/W, RO 16 bits Description Reserved Interrupt Disable--R/W. 10 0 = The function is capable of generating interrupts. 1 = The function can not generate its interrupt to the interrupt controller. Note that the corresponding Interrupt Status bit (D29:F0, D26:F0:06h, bit 3) is not affected by the interrupt enable. 9 Fast Back to Back Enable (FBE)--RO. Hardwired to 0. SERR# Enable (SERR_EN)--R/W. 0 = Disables EHC's capability to generate an SERR#. 1 = The Enhanced Host controller (EHC) is capable of generating (internally) SERR# in the following cases: 8 * When it receive a completion status other than "successful" for one of its DMA initiated memory reads on DMI (and subsequently on its internal interface). * When it detects an address or command parity error and the Parity Error Response bit is set. * When it detects a data parity error (when the data is going into the EHC) and the Parity Error Response bit is set. 7 Wait Cycle Control (WCC)--RO. Hardwired to 0. Parity Error Response (PER)--R/W. 0 = The EHC is not checking for correct parity (on its internal interface). 1 = The EHC is checking for correct parity (on its internal interface) and halt operation when bad parity is detected during the data phase. 6 NOTE: If the EHC detects bad parity on the address or command phases when the bit is set to 1, the host controller does not take the cycle. It halts the host controller (if currently not halted) and sets the Host System Error bit in the USBSTS register. This applies to both requests and completions from the system interface. This bit must be set for the parity errors to generate SERR#. Datasheet 5 VGA Palette Snoop (VPS)--RO. Hardwired to 0. 4 Postable Memory Write Enable (PMWE)--RO. Hardwired to 0. 3 Special Cycle Enable (SCE)--RO. Hardwired to 0. 665 EHCI Controller Registers (D29:F0, D26:F0) Bit Description Bus Master Enable (BME)--R/W. 2 0 = Disables this functionality. 1 = Enables the PCH to act as a master on the PCI bus for USB transfers. Memory Space Enable (MSE)--R/W. This bit controls access to the USB 2.0 Memory Space registers. 16.1.4 1 0 = Disables this functionality. 1 = Enables accesses to the USB 2.0 registers. The Base Address register (D29:F0, D26:F0:10h) for USB 2.0 should be programmed before this bit is set. 0 I/O Space Enable (IOSE)--RO. Hardwired to 0. PCISTS--PCI Status Register (USB EHCI--D29:F0, D26:F0) Address Offset: 06h-07h Default Value: 0290h Note: Attribute: Size: R/WC, RO 16 bits For the writable bits, software must write a 1 to clear bits that are set. Writing a 0 to the bit has no effect. Bit Description Detected Parity Error (DPE)--R/WC. 15 0 = No parity error detected. 1 = This bit is set by the PCH when a parity error is seen by the EHCI controller, regardless of the setting of bit 6 or bit 8 in the Command register or any other conditions. Signaled System Error (SSE)--R/WC. 14 0 = No SERR# signaled by the PCH. 1 = This bit is set by the PCH when it signals SERR# (internally). The SER_EN bit (bit 8 of the Command Register) must be 1 for this bit to be set. Received Master Abort (RMA)--R/WC. 13 0 = No master abort received by EHC on a memory access. 1 = This bit is set when EHC, as a master, receives a master abort status on a memory access. This is treated as a Host Error and halts the DMA engines. This event can optionally generate an SERR# by setting the SERR# Enable bit. Received Target Abort (RTA)--R/WC. 12 11 10:9 0 = No target abort received by EHC on memory access. 1 = This bit is set when EHC, as a master, receives a target abort status on a memory access. This is treated as a Host Error and halts the DMA engines. This event can optionally generate an SERR# by setting the SERR# Enable bit (D29:F0, D26:F0:04h, bit 8). Signaled Target Abort (STA)--RO. This bit is used to indicate when the EHCI function responds to a cycle with a target abort. There is no reason for this to happen, so this bit is hardwired to 0. DEVSEL# Timing Status (DEVT_STS)--RO. This 2-bit field defines the timing for DEVSEL# assertion. Master Data Parity Error Detected (DPED)--R/WC. 8 666 0 = No data parity error detected on USB2.0 read completion packet. 1 = This bit is set by the PCH when a data parity error is detected on a USB 2.0 read completion packet on the internal interface to the EHCI host controller and bit 6 of the Command register is set to 1. Datasheet EHCI Controller Registers (D29:F0, D26:F0) Bit Description 7 Fast Back to Back Capable (FB2BC)--RO. Hardwired to 1. 6 User Definable Features (UDF)--RO. Hardwired to 0. 5 66 MHz Capable (66 MHz _CAP)--RO. Hardwired to 0. 4 Capabilities List (CAP_LIST)--RO. Hardwired to 1 indicating that offset 34h contains a valid capabilities pointer. Interrupt Status--RO. This bit reflects the state of this function's interrupt at the input of the enable/disable logic. 3 0 = This bit will be 0 when the interrupt is de-asserted. 1 = This bit is a 1 when the interrupt is asserted. The value reported in this bit is independent of the value in the Interrupt Enable bit. 2:0 16.1.5 Reserved RID--Revision Identification Register (USB EHCI--D29:F0, D26:F0) Offset Address: 08h Default Value: See bit description Bit 7:0 16.1.6 Attribute: Size: Description Revision ID--RO. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Revision ID Register PI--Programming Interface Register (USB EHCI--D29:F0, D26:F0) Address Offset: 09h Default Value: 20h Bit 7:0 16.1.7 Attribute: Size: RO 8 bits Description Programming Interface--RO. A value of 20h indicates that this USB 2.0 host controller conforms to the EHCI Specification. SCC--Sub Class Code Register (USB EHCI--D29:F0, D26:F0) Address Offset: 0Ah Default Value: 03h Bit 7:0 Datasheet RO 8 bits Attribute: Size: RO 8 bits Description Sub Class Code (SCC)--RO. 03h = Universal serial bus host controller. 667 EHCI Controller Registers (D29:F0, D26:F0) 16.1.8 BCC--Base Class Code Register (USB EHCI--D29:F0, D26:F0) Address Offset: 0Bh Default Value: 0Ch Bit 7:0 16.1.9 RO 8 bits Description Base Class Code (BCC)--RO. 0Ch = Serial bus controller. PMLT--Primary Master Latency Timer Register (USB EHCI--D29:F0, D26:F0) Address Offset: 0Dh Default Value: 00h Bit 7:0 16.1.10 Attribute: Size: Attribute: Size: RO 8 bits Description Master Latency Timer Count (MLTC)--RO. Hardwired to 00h. Because the EHCI controller is internally implemented with arbitration on an interface (and not PCI), it does not need a master latency timer. HEADTYP--Header Type Register (USB EHCI--D29:F0, D26:F0) Address Offset: 0Eh Default Value: 80h Bit Attribute: Size: RO 8 bits Description Multi-Function Device--RO. When set to `1' indicates this is a multifunction device: 7 0 = Single-function device 1 = Multi-function device. When RMH is enabled, this bit defaults to 1. When RMH is disabled, this bit defaults to 0. 6:0 668 Configuration Layout. Hardwired to 00h, which indicates the standard PCI configuration layout. Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.1.11 MEM_BASE--Memory Base Address Register (USB EHCI--D29:F0, D26:F0) Address Offset: 10h-13h Default Value: 00000000h Bit 31:10 9:4 R/W, RO 32 bits Description Base Address--R/W. Bits [31:10] correspond to memory address signals [31:10], respectively. This gives 1-KB of locatable memory space aligned to 1-KB boundaries. Reserved 3 Prefetchable--RO. Hardwired to 0 indicating that this range should not be prefetched. 2:1 Type--RO. Hardwired to 00b indicating that this range can be mapped anywhere within 32-bit address space. 0 16.1.12 Attribute: Size: Resource Type Indicator (RTE)--RO. Hardwired to 0 indicating that the base address field in this register maps to memory space. SVID--USB EHCI Subsystem Vendor ID Register (USB EHCI--D29:F0, D26:F0) Address Offset: 2Ch-2Dh Default Value: XXXXh Reset: None Bit 15:0 Attribute: Size: R/W 16 bits Description Subsystem Vendor ID (SVID)--R/W. This register, in combination with the USB 2.0 Subsystem ID register, enables the operating system to distinguish each subsystem from the others. NOTE: Writes to this register are enabled when the WRT_RDONLY bit (D29:F0, D26:F0:80h, bit 0) is set to 1. 16.1.13 SID--USB EHCI Subsystem ID Register (USB EHCI--D29:F0, D26:F0) Address Offset: 2Eh-2Fh Default Value: XXXXh Reset: None Bit 15:0 Attribute: Size: R/W 16 bits Description Subsystem ID (SID)--R/W. BIOS sets the value in this register to identify the Subsystem ID. This register, in combination with the Subsystem Vendor ID register, enables the operating system to distinguish each subsystem from other(s). NOTE: Writes to this register are enabled when the WRT_RDONLY bit (D29:F0, D26:F0:80h, bit 0) is set to 1. Datasheet 669 EHCI Controller Registers (D29:F0, D26:F0) 16.1.14 CAP_PTR--Capabilities Pointer Register (USB EHCI--D29:F0, D26:F0) Address Offset: 34h Default Value: 50h 16.1.15 Description 7:0 Capabilities Pointer (CAP_PTR)--RO. This register points to the starting offset of the USB 2.0 capabilities ranges. INT_LN--Interrupt Line Register (USB EHCI--D29:F0, D26:F0) R/W 8 bits Description 7:0 Interrupt Line (INT_LN)--R/W. This data is not used by the PCH. It is used as a scratchpad register to communicate to software the interrupt line that the interrupt pin is connected to. INT_PN--Interrupt Pin Register (USB EHCI--D29:F0, D26:F0) Bit 7:0 Attribute: Size: RO 8 bits Description Interrupt Pin--RO. This reflects the value of D29IP.E1IP (Chipset Config Registers:Offset 3108:bits 3:0) or D26IP.E2IP (Chipset Config Registers:Offset 3114:bits 3:0). NOTE: Bits 7:4 are always 0h. PWR_CAPID--PCI Power Management Capability ID Register (USB EHCI--D29:F0, D26:F0) Address Offset: 50h Default Value: 01h Bit 7:0 670 Attribute: Size: Bit Address Offset: 3Dh Default Value: See Description 16.1.17 RO 8 bits Bit Address Offset: 3Ch Default Value: 00h Function Level Reset: No 16.1.16 Attribute: Size: Attribute: Size: RO 8 bits Description Power Management Capability ID--RO. A value of 01h indicates that this is a PCI Power Management capabilities field. Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.1.18 NXT_PTR1--Next Item Pointer #1 Register (USB EHCI--D29:F0, D26:F0) Address Offset: 51h Default Value: 58h 16.1.19 Attribute: Size: R/W 8 bits Bit Description 7:0 Next Item Pointer 1 Value--R/W (special). This register defaults to 58h, which indicates that the next capability registers begin at configuration offset 58h. This register is writable when the WRT_RDONLY bit (D29:F0, D26:F0:80h, bit 0) is set. This allows BIOS to effectively hide the Debug Port capability registers, if necessary. This register should only be written during system initialization before the plug-and-play software has enabled any master-initiated traffic. Only values of 58h (Debug Port and FLR capabilities visible) and 98h (Debug Port invisible, next capability is FLR) are expected to be programmed in this register. NOTE: Register not reset by D3-to-D0 warm reset. PWR_CAP--Power Management Capabilities Register (USB EHCI--D29:F0, D26:F0) Address Offset: 52h-53h Default Value: C9C2h Attribute: Size: R/W, RO 16 bits Bit Description 15:11 PME Support (PME_SUP)--R/W. This 5-bit field indicates the power states in which the function may assert PME#. The PCH EHC does not support the D1 or D2 states. For all other states, the PCH EHC is capable of generating PME#. Software should never need to modify this field. 10 9 8:6 D2 Support (D2_SUP)--RO. 0 = D2 State is not supported D1 Support (D1_SUP)--RO. 0 = D1 State is not supported Auxiliary Current (AUX_CUR)--R/W. The PCH EHC reports 375 mA maximum suspend well current required when in the D3COLD state. 5 Device Specific Initialization (DSI)--RO. The PCH reports 0, indicating that no device-specific initialization is required. 4 Reserved 3 PME Clock (PME_CLK)--RO. The PCH reports 0, indicating that no PCI clock is required to generate PME#. 2:0 Version (VER)--RO. The PCH reports 010b, indicating that it complies with Revision 1.1 of the PCI Power Management Specification. NOTES: 1. Normally, this register is read-only to report capabilities to the power management software. To report different power management capabilities, depending on the system in which the PCH is used, bits 15:11 and 8:6 in this register are writable when the WRT_RDONLY bit (D29:F0, D26:F0:80h, bit 0) is set. The value written to this register does not affect the hardware other than changing the value returned during a read. 2. Reset: core well, but not D3-to-D0 warm reset. Datasheet 671 EHCI Controller Registers (D29:F0, D26:F0) 16.1.20 PWR_CNTL_STS--Power Management Control/ Status Register (USB EHCI--D29:F0, D26:F0) Address Offset: 54h-55h Attribute: Default Value: 0000h Size: Function Level Reset: No (Bits 8 and 15 only) Bit R/W, R/WC, RO 16 bits Description PME Status--R/WC. 15 0 = Writing a 1 to this bit will clear it and cause the internal PME to de-assert (if enabled). 1 = This bit is set when the PCH EHC would normally assert the PME# signal independent of the state of the PME_En bit. NOTE: This bit must be explicitly cleared by the operating system each time the operating system is loaded. This bit is not reset by Function Level Reset. 14:13 12:9 Data Scale--RO. Hardwired to 00b indicating it does not support the associated Data register. Data Select--RO. Hardwired to 0000b indicating it does not support the associated Data register. PME Enable--R/W. 0 = Disable. 1 = Enables the PCH EHC to generate an internal PME signal when PME_Status is 1. 8 NOTE: This bit must be explicitly cleared by the operating system each time it is initially loaded. This bit is not reset by Function Level Reset. 7:2 Reserved Power State--R/W. This 2-bit field is used both to determine the current power state of EHC function and to set a new power state. The definition of the field values are: 00 = D0 state 11 = D3HOT state 1:0 If software attempts to write a value of 10b or 01b in to this field, the write operation completes normally; however, the data is discarded and no state change occurs. When in the D3HOT state, the PCH does not accept accesses to the EHC memory range; but the configuration space is still be accessible. When not in the D0 state, the generation of the interrupt output is blocked. Specifically, the EHC Interrupt is not asserted by the PCH when not in the D0 state. When software changes this value from the D3HOT state to the D0 state, an internal warm (soft) controlled reset is generated, and software must re-initialize the function. NOTE: Reset (bits 15, 8): suspend well, and not D3-to-D0 warm reset nor core well reset. 672 Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.1.21 DEBUG_CAPID--Debug Port Capability ID Register (USB EHCI--D29:F0, D26:F0) Address Offset: 58h Default Value: 0Ah 16.1.22 Description 7:0 Debug Port Capability ID--RO. Hardwired to 0Ah indicating that this is the start of a Debug Port Capability structure. NXT_PTR2--Next Item Pointer #2 Register (USB EHCI--D29:F0, D26:F0) RO 8 bits Description 7:0 Next Item Pointer 2 Capability--RO. This register points to the next capability in the Function Level Reset capability structure. DEBUG_BASE--Debug Port Base Offset Register (USB EHCI--D29:F0, D26:F0) Bit 15:13 12:0 Attribute: Size: RO 16 bits Description BAR Number--RO. Hardwired to 001b to indicate the memory BAR begins at offset 10h in the EHCI configuration space. Debug Port Offset--RO. Hardwired to 0A0h to indicate that the Debug Port registers begin at offset A0h in the EHCI memory range. USB_RELNUM--USB Release Number Register (USB EHCI--D29:F0, D26:F0) Address Offset: 60h Default Value: 20h Bit 7:0 Datasheet Attribute: Size: Bit Address Offset: 5Ah-5Bh Default Value: 20A0h 16.1.24 RO 8 bits Bit Address Offset: 59h Default Value: 98h Function Level Reset: No 16.1.23 Attribute: Size: Attribute: Size: RO 8 bits Description USB Release Number--RO. A value of 20h indicates that this controller follows Universal Serial Bus (USB) Specification, Revision 2.0. 673 EHCI Controller Registers (D29:F0, D26:F0) 16.1.25 FL_ADJ--Frame Length Adjustment Register (USB EHCI--D29:F0, D26:F0) Address Offset: 61h Default Value: 20h Function Level Reset: No Attribute: Size: R/W 8 bits This feature is used to adjust any offset from the clock source that generates the clock that drives the SOF counter. When a new value is written into these six bits, the length of the frame is adjusted. Its initial programmed value is system dependent based on the accuracy of hardware USB clock and is initialized by system BIOS. This register should only be modified when the HChalted bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 12) in the USB2.0_STS register is a 1. Changing value of this register while the host controller is operating yields undefined results. It should not be reprogrammed by USB system software unless the default or BIOS programmed values are incorrect, or the system is restoring the register while returning from a suspended state. These bits in suspend well and not reset by a D3-to-D0 warm rest or a core well reset. Bit 7:6 Description Reserved--RO. These bits are reserved for future use and should read as 00b. Frame Length Timing Value--R/W. Each decimal value change to this register corresponds to 16 high-speed bit times. The SOF cycle time (number of SOF counter clock periods to generate a SOF micro-frame length) is equal to 59488 + value in this field. The default value is decimal 32 (20h), which gives a SOF cycle time of 60000. 5:0 674 Frame Length (# 480 MHz Clocks) (decimal) Frame Length Timing Value (this register) (decimal) 59488 0 59504 1 59520 2 -- -- 59984 31 60000 32 -- -- 60480 62 Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.1.26 PWAKE_CAP--Port Wake Capability Register (USB EHCI--D29:F0, D26:F0) Address Offset: Default Value: Default Value: Function Level Reset: 62-63h 01FFh 07FFh No Attribute: Size: R/W 16 bits This register is in the suspend power well. The intended use of this register is to establish a policy about which ports are to be used for wake events. Bit positions 1-8(D29) or 1-6(D26) in the mask correspond to a physical port implemented on the current EHCI controller. A 1 in a bit position indicates that a device connected below the port can be enabled as a wake-up device and the port may be enabled for disconnect/ connect or overcurrent events as wake-up events. This is an information-only mask register. The bits in this register do not affect the actual operation of the EHCI host controller. The system-specific policy can be established by BIOS initializing this register to a system-specific value. System software uses the information in this register when enabling devices and ports for remote wake-up. These bits are not reset by a D3-to-D0 warm rest or a core well reset. Bit 15:9 (D29) 15:7 (D26) 8:1 (D29) 6:1 (D26) 0 Datasheet Description Reserved Port Wake Up Capability Mask--R/W. Bit positions 1 through 8 (Device 29) or 1 through 6(Device 26) correspond to a physical port implemented on this host controller. For example, bit position 1 corresponds to port 1, bit position 2 corresponds to port 2, etc. Port Wake Implemented--R/W. A 1 in this bit indicates that this register is implemented to software. 675 EHCI Controller Registers (D29:F0, D26:F0) 16.1.27 LEG_EXT_CAP--USB EHCI Legacy Support Extended Capability Register (USB EHCI--D29:F0, D26:F0) Address Offset: Default Value: Power Well: Function Level Reset: Note: 68-6Bh 00000001h Suspend No R/W, RO 32 bits These bits are not reset by a D3-to-D0 warm rest or a core well reset. Bit 31:25 24 23:17 16 15:8 7:0 676 Attribute: Size: Description Reserved--RO. Hardwired to 00h HC OS Owned Semaphore--R/W. System software sets this bit to request ownership of the EHCI controller. Ownership is obtained when this bit reads as 1 and the HC BIOS Owned Semaphore bit reads as clear. Reserved--RO. Hardwired to 00h HC BIOS Owned Semaphore--R/W. The BIOS sets this bit to establish ownership of the EHCI controller. System BIOS will clear this bit in response to a request for ownership of the EHCI controller by system software. Next EHCI Capability Pointer--RO. Hardwired to 00h to indicate that there are no EHCI Extended Capability structures in this device. Capability ID--RO. Hardwired to 01h to indicate that this EHCI Extended Capability is the Legacy Support Capability. Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.1.28 LEG_EXT_CS--USB EHCI Legacy Support Extended Control / Status Register (USB EHCI--D29:F0, D26:F0) Address Offset: Default Value: Power Well: Function Level Reset: Note: 6C-6Fh 00000000h Suspend No Attribute: Size: R/W, R/WC, RO 32 bits These bits are not reset by a D3-to-D0 warm rest or a core well reset. Bit Description SMI on BAR--R/WC. Software clears this bit by writing a 1 to it. 31 0 = Base Address Register (BAR) not written. 1 = This bit is set to 1 when the Base Address Register (BAR) is written. SMI on PCI Command--R/WC. Software clears this bit by writing a 1 to it. 30 0 = PCI Command (PCICMD) Register Not written. 1 = This bit is set to 1 when the PCI Command (PCICMD) Register is written. SMI on OS Ownership Change--R/WC. Software clears this bit by writing a 1 to it. 29 28:22 0 = No HC OS Owned Semaphore bit change. 1 = This bit is set to 1 when the HC OS Owned Semaphore bit in the LEG_EXT_CAP register (D29:F0, D26:F0:68h, bit 24) transitions from 1 to 0 or 0 to 1. Reserved SMI on Async Advance--RO. This bit is a shadow bit of the Interrupt on Async Advance bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 5) in the USB2.0_STS register. 21 NOTE: To clear this bit system software must write a 1 to the Interrupt on Async Advance bit in the USB2.0_STS register. SMI on Host System Error--RO. This bit is a shadow bit of Host System Error bit in the USB2.0_STS register (D29:F0, D26:F0:CAPLENGTH + 24h, bit 4). 20 NOTE: To clear this bit system software must write a 1 to the Host System Error bit in the USB2.0_STS register. SMI on Frame List Rollover--RO. This bit is a shadow bit of Frame List Rollover bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 3) in the USB2.0_STS register. 19 NOTE: To clear this bit system software must write a 1 to the Frame List Rollover bit in the USB2.0_STS register. SMI on Port Change Detect--RO. This bit is a shadow bit of Port Change Detect bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 2) in the USB2.0_STS register. 18 NOTE: To clear this bit system software must write a 1 to the Port Change Detect bit in the USB2.0_STS register. SMI on USB Error--RO. This bit is a shadow bit of USB Error Interrupt (USBERRINT) bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 1) in the USB2.0_STS register. 17 NOTE: To clear this bit system software must write a 1 to the USB Error Interrupt bit in the USB2.0_STS register. SMI on USB Complete--RO. This bit is a shadow bit of USB Interrupt (USBINT) bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 0) in the USB2.0_STS register. 16 NOTE: To clear this bit system software must write a 1 to the USB Interrupt bit in the USB2.0_STS register. Datasheet 677 EHCI Controller Registers (D29:F0, D26:F0) Bit Description SMI on BAR Enable--R/W. 15 0 = Disable. 1 = Enable. When this bit is 1 and SMI on BAR (D29:F0, D26:F0:6Ch, bit 31) is 1, then the host controller will issue an SMI. SMI on PCI Command Enable--R/W. 14 0 = Disable. 1 = Enable. When this bit is 1 and SMI on PCI Command (D29:F0, D26:F0:6Ch, bit 30) is 1, then the host controller will issue an SMI. SMI on OS Ownership Enable--R/W. 13 12:6 0 = Disable. 1 = Enable. When this bit is a 1 AND the OS Ownership Change bit (D29:F0, D26:F0:6Ch, bit 29) is 1, the host controller will issue an SMI. Reserved SMI on Async Advance Enable--R/W. 5 0 = Disable. 1 = Enable. When this bit is a 1, and the SMI on Async Advance bit (D29:F0, D26:F0:6Ch, bit 21) is a 1, the host controller will issue an SMI immediately. SMI on Host System Error Enable--R/W. 4 0 = Disable. 1 = Enable. When this bit is a 1, and the SMI on Host System Error (D29:F0, D26:F0:6Ch, bit 20) is a 1, the host controller will issue an SMI. SMI on Frame List Rollover Enable--R/W. 3 0 = Disable. 1 = Enable. When this bit is a 1, and the SMI on Frame List Rollover bit (D29:F0, D26:F0:6Ch, bit 19) is a 1, the host controller will issue an SMI. SMI on Port Change Enable--R/W. 2 0 = Disable. 1 = Enable. When this bit is a 1, and the SMI on Port Change Detect bit (D29:F0, D26:F0:6Ch, bit 18) is a 1, the host controller will issue an SMI. SMI on USB Error Enable--R/W. 1 0 = Disable. 1 = Enable. When this bit is a 1, and the SMI on USB Error bit (D29:F0, D26:F0:6Ch, bit 17) is a 1, the host controller will issue an SMI immediately. SMI on USB Complete Enable--R/W. 0 678 0 = Disable. 1 = Enable. When this bit is a 1, and the SMI on USB Complete bit (D29:F0, D26:F0:6Ch, bit 16) is a 1, the host controller will issue an SMI immediately. Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.1.29 SPECIAL_SMI--Intel Specific USB 2.0 SMI Register (USB EHCI--D29:F0, D26:F0) Address Offset: Default Value: Power Well: Function Level Reset: Note: 70h-73h 00000000h Suspend No Attribute: Size: R/W, R/WC 32 bits These bits are not reset by a D3-to-D0 warm rest or a core well reset. Bit 31:30 (D29) 31:28 (D26) Description Reserved SMI on PortOwner--R/WC. Software clears these bits by writing a 1 to it. 29:22 (D29) 27:22 (D26) 0 = No Port Owner bit change. 1 = Bits 29:22, 27:22 correspond to the Port Owner bits for ports 0 (22) through 5 (27) or 7 (29). These bits are set to 1 when the associated Port Owner bits transition from 0 to 1 or 1 to 0. SMI on PMCSR--R/WC. Software clears these bits by writing a 1 to it. 21 0 = Power State bits Not modified. 1 = Software modified the Power State bits in the Power Management Control/ Status (PMCSR) register (D29:F0, D26:F0:54h). SMI on Async--R/WC. Software clears these bits by writing a 1 to it. 20 0 = No Async Schedule Enable bit change 1 = Async Schedule Enable bit transitioned from 1 to 0 or 0 to 1. SMI on Periodic--R/WC. Software clears this bit by writing a 1 it. 19 0 = No Periodic Schedule Enable bit change. 1 = Periodic Schedule Enable bit transitions from 1 to 0 or 0 to 1. 18 0 = No Configure Flag (CF) change. 1 = Configure Flag (CF) transitions from 1 to 0 or 0 to 1. SMI on CF--R/WC. Software clears this bit by writing a 1 it. SMI on HCHalted--R/WC. Software clears this bit by writing a 1 it. 17 0 = HCHalted did Not transition to 1 (as a result of the Run/Stop bit being cleared). 1 = HCHalted transitions to 1 (as a result of the Run/Stop bit being cleared). SMI on HCReset--R/WC. Software clears this bit by writing a 1 it. 16 15:14 0 = HCRESET did Not transitioned to 1. 1 = HCRESET transitioned to 1. Reserved SMI on PortOwner Enable--R/W. 13:6 0 = Disable. 1 = Enable. When any of these bits are 1 and the corresponding SMI on PortOwner bits are 1, then the host controller will issue an SMI. Unused ports should have their corresponding bits cleared. SMI on PMSCR Enable--R/W. 5 Datasheet 0 = Disable. 1 = Enable. When this bit is 1 and SMI on PMSCR is 1, then the host controller will issue an SMI. 679 EHCI Controller Registers (D29:F0, D26:F0) Bit Description SMI on Async Enable--R/W. 4 0 = Disable. 1 = Enable. When this bit is 1 and SMI on Async is 1, then the host controller will issue an SMI SMI on Periodic Enable--R/W. 3 0 = Disable. 1 = Enable. When this bit is 1 and SMI on Periodic is 1, then the host controller will issue an SMI. SMI on CF Enable--R/W. 2 0 = Disable. 1 = Enable. When this bit is 1 and SMI on CF is 1, then the host controller will issue an SMI. SMI on HCHalted Enable--R/W. 1 0 = Disable. 1 = Enable. When this bit is a 1 and SMI on HCHalted is 1, then the host controller will issue an SMI. SMI on HCReset Enable--R/W. 0 16.1.30 0 = Disable. 1 = Enable. When this bit is a 1 and SMI on HCReset is 1, then host controller will issue an SMI. ACCESS_CNTL--Access Control Register (USB EHCI--D29:F0, D26:F0) Address Offset: 80h Default Value: 00h Function Level Reset: No Bit 7:1 0 680 Attribute: Size: R/W 8 bits Description Reserved WRT_RDONLY--R/W. When set to 1, this bit enables a select group of normally read-only registers in the EHC function to be written by software. Registers that may only be written when this mode is entered are noted in the summary tables and detailed description as "Read/Write-Special". The registers fall into two categories: 1. System-configured parameters 2. Status bits Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.1.31 EHCIIR1--EHCI Initialization Register 1 (USB EHCI--D29:F0, D26:F0) Address Offset: 84h-87h Default Value: 83088E01h Bit 31:29 Attribute: Size: R/W 32 bits Description Reserved EHCI Prefetch Entry Clear--R/W. 28 0 = EHC will clear prefetched entries in DMA. 1 = EHC will not clear prefetched entries in DMA 27:19 18 17:11 10:8 7:5 Reserved EHCI Initialization Register 1 Field 2--R/W. BIOS must set this bit to 1. Reserved EHCI Initialization Register 1 Field 1--R/W. BIOS must set this field to 11. Reserved Pre-fetch Based Pause Enable--R/W. 4 0 = Pre-fetch Based Pause is disabled. 1 = Pre-fetch Based Pause is enabled. 3:0 16.1.32 Reserved EHCIIR2--EHCI Initialization Register 2 (USB EHCI--D29:F0, D26:F0) Offset Address: 88h-8Bh Default Value: 04000010h Bit 31:30 29 28:20 19 18:12 11 10 9 8 7:6 5 4:0 Datasheet Attribute: Size: R/W 32-bit Description Reserved EHCI Initialization Register 2 Field 6--R/W. BIOS must set this bit to 0. Reserved EHCI Initialization Register 2 Field 5--R/W. BIOS must set this bit to 1. Reserved EHCI Initialization Register 2 Field 4--R/W. BIOS must set this bit to 1. EHCI Initialization Register 2 Field 3--R/W. BIOS must set this bit to 1. Reserved EHCI Initialization Register 2 Field 2--R/W. BIOS must set this bit to 1. Reserved EHCI Initialization Register 2 Field 1--R/W. BIOS must set this bit to 1. Reserved 681 EHCI Controller Registers (D29:F0, D26:F0) 16.1.33 FLR_CID--Function Level Reset Capability ID Register (USB EHCI--D29:F0, D26:F0) Address Offset: 98h Default Value: 09h Function Level Reset: No Bit Attribute: Size: RO 8 bits Description Capability ID--R0. 7:0 13h = If FLRCSSEL = 0 09h (Vendor Specific Capability) = If FLRCSSEL = 1 16.1.34 FLR_NEXT--Function Level Reset Next Capability Pointer Register (USB EHCI--D29:F0, D26:F0) Address Offset: 99h Default Value: 00h Function Level Reset: No Bit 7:0 682 Attribute: Size: RO 8 bits Description A value of 00h in this register indicates this is the last capability field. Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.1.35 FLR_CLV--Function Level Reset Capability Length and Version Register (USB EHCI--D29:F0, D26:F0) Address Offset: Default Value: Function Level Reset: 9Ah-9Bh 2006h No Attribute: Size: R/WO, RO 16 bits When FLRCSSEL = 0, this register is defined as follows: Bit 15:10 Description Reserved 9 FLR Capability--R/WO. 1 = Support for Function Level Reset (FLR). 8 TXP Capability--R/WO. 1 = Support for Transactions Pending (TXP) bit. TXP must be supported if FLR is supported. 7:0 Capability Length--RO. This field indicates the # of bytes of this vendor specific capability as required by the PCI specification. It has the value of 06h for the FLR capability. When FLRCSSEL = 1, this register is defined as follows: Bit Description 15:12 Vendor Specific Capability ID--RO. A value of 2h in this field identifies this capability as Function Level Reset. 11:8 7:0 16.1.36 Capability Version--RO. This field indicates the version of the FLR capability. Capability Length--RO. This field indicates the # of bytes of this vendor specific capability as required by the PCI specification. It has the value of 06h for the FLR capability. FLR_CTRL--Function Level Reset Control Register (USB EHCI--D29:F0, D26:F0) Address Offset: 9Ch Default Value: 00h Function Level Reset: No Bit 7:1 0 Datasheet Attribute: Size: R/W 8 bits Description Reserved Initiate FLR--R/W. This bit is used to initiate FLR transition. A write of 1 initiates FLR transition. Since hardware must not respond to any cycles until FLR completion, the value read by software from this bit is always 0. 683 EHCI Controller Registers (D29:F0, D26:F0) 16.1.37 FLR_STS--Function Level Reset Status Register (USB EHCI--D29:F0, D26:F0) Address Offset: 9Dh Default Value: 00h Function Level Reset: No Bit 7:1 Attribute: Size: RO 8 bits Description Reserved Transactions Pending (TXP)--RO. 0 16.1.38 0 = Completions for all non-posted requests have been received. 1 = Controller has issued non-posted requests which have no bee completed. EHCIIR3--EHCI Initialization Register 3 (USB EHCI--D29:F0, D26:F0) Offset Address: F4h-F7h Default Value: 00408588h Bit Attribute: Size: R/W 32-bit Description EHCIIR3 Write Enable--R/W. 31 30:24 23:22 21:0 16.1.39 0 = Writes to the EHCIIR3 register are disabled 1 = If set, the values of the EHCIIR3 register may be modified Reserved EHCI Initialization Register 3 Field 1--R/W. BIOS must program this field to 10b. Reserved EHCIIR4--EHCI Initialization Register 4 (USB EHCI--D29:F0, D26:F0) Offset Address: FCh-FFh Default Value: 20591708h Bit 31:18 17 16 15 14:0 684 Attribute: Size: R/W 32-bit Description Reserved EHCI Initialization Register 4 Field 2--R/W. BIOS must set this bit to 1. Reserved EHCI Initialization Register 4 Field 1--R/W. BIOS must set this bit to 1. Reserved Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.2 Memory-Mapped I/O Registers The EHCI memory-mapped I/O space is composed of two sets of registers: Capability Registers and Operational Registers. Note: The PCH EHCI controller will not accept memory transactions (neither reads nor writes) as a target that are locked transactions. The locked transactions should not be forwarded to PCI as the address space is known to be allocated to USB. Note: When the EHCI function is in the D3 PCI power state, accesses to the USB 2.0 memory range are ignored and result a master abort. Similarly, if the Memory Space Enable (MSE) bit (D29:F0, D26:F0:04h, bit 1) is not set in the Command register in configuration space, the memory range will not be decoded by the PCH enhanced host controller (EHC). If the MSE bit is not set, the PCH must default to allowing any memory accesses for the range specified in the BAR to go to PCI. This is because the range may not be valid and, therefore, the cycle must be made available to any other targets that may be currently using that range. 16.2.1 Host Controller Capability Registers These registers specify the limits, restrictions and capabilities of the host controller implementation. Within the host controller capability registers, only the structural parameters register is writable. These registers are implemented in the suspend well and is only reset by the standard suspend-well hardware reset, not by HCRESET or the D3-to-D0 reset. Note: Note that the EHCI controller does not support as a target memory transactions that are locked transactions. Attempting to access the EHCI controller Memory-Mapped I/O space using locked memory transactions will result in undefined behavior. Note: Note that when the USB2 function is in the D3 PCI power state, accesses to the USB2 memory range are ignored and will result in a master abort. Similarly, if the Memory Space Enable (MSE) bit is not set in the Command register in configuration space, the memory range will not be decoded by the Enhanced Host Controller (EHC). If the MSE bit is not set, the EHC will not claim any memory accesses for the range specified in the BAR. Table 16-2. Enhanced Host Controller Capability Registers MEM_BASE + Offset Mnemonic 00h CAPLENGTH Capabilities Registers Length 02h-03h HCIVERSION Host Controller Interface Version Number 04h-07h HCSPARAMS Host Controller Structural Parameters 08h-0Bh HCCPARAMS Host Controller Capability Parameters Register Default Type 20h RO 0100h RO 00204208h (D29:F0) 00203206 (D26:F0) 00006881h R/W (special), RO RO NOTE: "Read/Write Special" means that the register is normally read-only, but may be written when the WRT_RDONLY bit is set. Because these registers are expected to be programmed by BIOS during initialization, their contents must not get modified by HCRESET or D3-toD0 internal reset. Datasheet 685 EHCI Controller Registers (D29:F0, D26:F0) 16.2.1.1 CAPLENGTH--Capability Registers Length Register Offset: Default Value: 16.2.1.2 MEM_BASE + 00h 20h Description 7:0 Capability Register Length Value--RO. This register is used as an offset to add to the Memory Base Register (D29:F0, D26:F0:10h) to find the beginning of the Operational Register Space. This field is hardwired to 20h indicating that the Operation Registers begin at offset 20h. HCIVERSION--Host Controller Interface Version Number Register MEM_BASE + 02h-03h 0100h Bit 15:0 Attribute: Size: RO 16 bits Description Host Controller Interface Version Number--RO. This is a two-byte register containing a BCD encoding of the version number of interface that this host controller interface conforms. HCSPARAMS--Host Controller Structural Parameters Register Offset: Default Value: Function Level Reset: Note: RO 8 bits Bit Offset: Default Value: 16.2.1.3 Attribute: Size: MEM_BASE + 04h-07h 00204208h (D29:F0) 00203206h (D26:F0) No Attribute: Size: R/W, RO 32 bits This register is reset by a suspend well reset and not a D3-to-D0 reset or HCRESET. Bit 31:24 23:20 19:16 Description Reserved Debug Port Number (DP_N)--RO. Hardwired to 2h indicating that the Debug Port is on the second lowest numbered port on the EHCI. EHCI#1: Port 1 EHCI#2: Port 9 Reserved Number of Companion Controllers (N_CC)--R/W. This field indicates the number of companion controllers associated with this USB EHCI host controller. 15:12 11:8 7:4 3:0 BIOS must program this field to 0b to indicate companion host controllers are not supported. Port-ownership hand-off is not supported. Only high-speed devices are supported on the host controller root ports. Number of Ports per Companion Controller (N_PCC)--RO. This field indicates the number of ports supported per companion host controller. This field is 0h indication no other companion controller support. Reserved. These bits are reserved and default to 0. N_PORTS--R/W. This field specifies the number of physical downstream ports implemented on this host controller. The value of this field determines how many port registers are addressable in the Operational Register Space. Valid values are in the range of 1h to Fh. A 0 in this field is undefined. For Integrated USB 2.0 Rate Matching Hub Enabled: Each EHCI reports 2 ports by default. Port 0 assigned to the RMH and port 1 assigned as the debug port. When the KVM/USB-R feature is enabled it will show up as Port2 on the EHCI, and BIOS would need to update this field to 3h. NOTE: This register is writable when the WRT_RDONLY bit is set. 686 Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.2.1.4 HCCPARAMS--Host Controller Capability Parameters Register Offset: Default Value: MEM_BASE + 08h-0Bh 00006881h Bit 31:18 Attribute: Size: RO 32 bits Description Reserved 17 Asynchronous Schedule Update Capability (ASUC)--R/W. There is no functionality associated with this bit. 16 Periodic Schedule Update Capability (PSUC)--RO. This field is hardwired to 0b to indicate that the EHC hardware supports the Periodic Schedule Update Event Flag in the USB2.0_CMD register. 15:8 7:4 EHCI Extended Capabilities Pointer (EECP)--RO. This field is hardwired to 68h, indicating that the EHCI capabilities list exists and begins at offset 68h in the PCI configuration space. Isochronous Scheduling Threshold--RO. This field indicates, relative to the current position of the executing host controller, where software can reliably update the isochronous schedule. When bit 7 is 0, the value of the least significant 3 bits indicates the number of micro-frames a host controller hold a set of isochronous data structures (one or more) before flushing the state. When bit 7 is a 1, then host software assumes the host controller may cache an isochronous data structure for an entire frame. See the EHCI specification for details on how software uses this information for scheduling isochronous transfers. This field is hardwired to 8h. 3 Reserved 2 Asynchronous Schedule Park Capability--RO. This bit is hardwired to 0 indicating that the host controller does not support this optional feature Programmable Frame List Flag--RO. 1 0 0 = System software must use a frame list length of 1024 elements with this host controller. The USB2.0_CMD register (D29:F0, D26:F0:CAPLENGTH + 20h, bits 3:2) Frame List Size field is a read-only register and must be set to 0. 1 = System software can specify and use a smaller frame list and configure the host controller using the USB2.0_CMD register Frame List Size field. The frame list must always be aligned on a 4K page boundary. This requirement ensures that the frame list is always physically contiguous. 64-bit Addressing Capability--RO. This field documents the addressing range capability of this implementation. The value of this field determines whether software should use the 32-bit or 64-bit data structures. This bit is hardwired to 1. NOTE: The PCH supports 64 bit addressing only. Datasheet 687 EHCI Controller Registers (D29:F0, D26:F0) 16.2.2 Host Controller Operational Registers This section defines the enhanced host controller operational registers. These registers are located after the capabilities registers. The operational register base must be DWord-aligned and is calculated by adding the value in the first capabilities register (CAPLENGTH) to the base address of the enhanced host controller register address space (MEM_BASE). Since CAPLENGTH is always 20h, Table 16-3 already accounts for this offset. All registers are 32 bits in length. Table 16-3. Enhanced Host Controller Operational Register Address Map MEM_BASE + Offset Mnemonic 20h-23h USB2.0_CMD 24h-27h Special Notes Type 00080000h R/W, RO USB2.0_STS USB 2.0 Status 00001000h R/WC, RO 28h-2Bh USB2.0_INTR USB 2.0 Interrupt Enable 00000000h R/W 2Ch-2Fh FRINDEX USB 2.0 Frame Index 00000000h R/W, 30h-33h CTRLDSSEGMENT Control Data Structure Segment 00000000h R/W, RO 34h-37h PERODICLISTBASE Period Frame List Base Address 00000000h R/W 38h-3Bh ASYNCLISTADDR Current Asynchronous List Address 00000000h R/W 3Ch-5Fh -- 60h-63h CONFIGFLAG 64h-67h Reserved 0h RO Configure Flag 00000000h Suspend R/W PORT0SC Port 0 Status and Control 00003000h Suspend R/W, R/WC, RO 68h-6Bh PORT1SC Port 1 Status and Control 00003000h Suspend R/W, R/WC, RO 6Ch-6Fh PORT2SC Port 2 Status and Control 00003000h Suspend R/W, R/WC, RO 70h-73h PORT3SC Port 3 Status and Control 00003000h Suspend R/W, R/WC, RO 74h-77h PORT4SC Port 4 Status and Control 00003000h Suspend R/W, R/WC, RO 78h-7Bh PORT5SC Port 5 Status and Control 00003000h Suspend R/W, R/WC, RO PORT6SC Port 6 Status and Control 00003000h Suspend R/W, R/WC, RO PORT7SC Port 7 Status and Control 00003000h Suspend R/W, R/WC, RO 74h-77h 78h-7Bh (D29 Only) 7Ch-9Fh 688 Default USB 2.0 Command (D29 Only) Note: Register Name -- Reserved Undefined RO A0h-B3h -- Debug Port Registers Undefined See register description B4h-3FFh -- Reserved Undefined RO Software must read and write these registers using only DWord accesses.These registers are divided into two sets. The first set at offsets MEM_BASE + 00:3Bh are implemented in the core power well. Unless otherwise noted, the core well registers are reset by the assertion of any of the following: * Core well hardware reset * HCRESET * D3-to-D0 reset Datasheet EHCI Controller Registers (D29:F0, D26:F0) The second set at offsets MEM_BASE + 60h to the end of the implemented register space are implemented in the Suspend power well. Unless otherwise noted, the suspend well registers are reset by the assertion of either of the following: * Suspend well hardware reset * HCRESET 16.2.2.1 USB2.0_CMD--USB 2.0 Command Register Offset: Default Value: Bit 31:24 MEM_BASE + 20-23h 00080000h Attribute: Size: R/W, RO 32 bits Description Reserved Interrupt Threshold Control--R/W. System software uses this field to select the maximum rate at which the host controller will issue interrupts. The only valid values are defined below. If software writes an invalid value to this register, the results are undefined. Value 23:16 15:14 13 Maximum Interrupt Interval 00h Reserved 01h 1 micro-frame 02h 2 micro-frames 04h 4 micro-frames 08h 8 micro-frames (default, equates to 1 ms) 10h 16 micro-frames (2 ms) 20h 32 micro-frames (4 ms) 40h 64 micro-frames (8 ms) Reserved Asynch Schedule Update (ASC)--R/W. There is no functionality associated with this bit. Periodic Schedule Prefetch Enable--R/W. This bit is used by software to enable the host controller to prefetch the periodic schedule even in C0. 0 = Prefetch based pause enabled only when not in C0. 1 = Prefetch based pause enable in C0. 12 11:8 7 Datasheet Once software has written a 1b to this bit to enable periodic schedule prefetching, it must disable prefecthing by writing a 0b to this bit whenever periodic schedule updates are about to begin. Software should continue to dynamically disable and re-enable the prefetcher surrounding any updates to the periodic scheduler (that is, until the host controller has been reset using a HCRESET). Unimplemented Asynchronous Park Mode Bits--RO. Hardwired to 000b indicating the host controller does not support this optional feature. Light Host Controller Reset--RO. Hardwired to 0. The PCH does not implement this optional reset. 689 EHCI Controller Registers (D29:F0, D26:F0) Bit Description Interrupt on Async Advance Doorbell--R/W. This bit is used as a doorbell by software to tell the host controller to issue an interrupt the next time it advances asynchronous schedule. 6 0 = The host controller sets this bit to a 0 after it has set the Interrupt on Async Advance status bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 5) in the USB2.0_STS register to a 1. 1 = Software must write a 1 to this bit to ring the doorbell. When the host controller has evicted all appropriate cached schedule state, it sets the Interrupt on Async Advance status bit in the USB2.0_STS register. If the Interrupt on Async Advance Enable bit in the USB2.0_INTR register (D29:F0, D26:F0:CAPLENGTH + 28h, bit 5) is a 1 then the host controller will assert an interrupt at the next interrupt threshold. See the EHCI specification for operational details. NOTE: Software should not write a 1 to this bit when the asynchronous schedule is inactive. Doing so will yield undefined results. 5 4 3:2 Asynchronous Schedule Enable--R/W. This bit controls whether the host controller skips processing the Asynchronous Schedule. 0 = Do not process the Asynchronous Schedule 1 = Use the ASYNCLISTADDR register to access the Asynchronous Schedule. Periodic Schedule Enable--R/W. This bit controls whether the host controller skips processing the Periodic Schedule. 0 = Do not process the Periodic Schedule 1 = Use the PERIODICLISTBASE register to access the Periodic Schedule. Frame List Size--RO. The PCH hardwires this field to 00b because it only supports the 1024-element frame list size. Host Controller Reset (HCRESET)--R/W. This control bit used by software to reset the host controller. The effects of this on root hub registers are similar to a Chip Hardware Reset (that is, RSMRST# assertion and PWROK de-assertion on the PCH). When software writes a 1 to this bit, the host controller resets its internal pipelines, timers, counters, state machines, etc. to their initial value. Any transaction currently in progress on USB is immediately terminated. A USB reset is not driven on downstream ports. 1 NOTE: PCI configuration registers and Host controller capability registers are not effected by this reset. All operational registers, including port registers and port state machines are set to their initial values. Port ownership reverts to the companion host controller(s), with the side effects described in the EHCI spec. Software must re-initialize the host controller to return the host controller to an operational state. This bit is set to 0 by the host controller when the reset process is complete. Software cannot terminate the reset process early by writing a 0 to this register. Software should not set this bit to a 1 when the HCHalted bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 12) in the USB2.0_STS register is a 0. Attempting to reset an actively running host controller will result in undefined behavior. This reset me be used to leave EHCI port test modes. 690 Datasheet EHCI Controller Registers (D29:F0, D26:F0) Bit Description Run/Stop (RS)--R/W. 0 = Stop (default) 1 = Run. When set to a 1, the Host controller proceeds with execution of the schedule. The Host controller continues execution as long as this bit is set. When this bit is set to 0, the Host controller completes the current transaction on the USB and then halts. The HCHalted bit in the USB2.0_STS register indicates when the Host controller has finished the transaction and has entered the stopped state. Software should not write a 1 to this field unless the host controller is in the Halted state (that is, HCHalted in the USBSTS register is a 1). The Halted bit is cleared immediately when the Run bit is set. 0 The following table explains how the different combinations of Run and Halted should be interpreted: Run/Stop Halted 0b 0b Interpretation In the process of halting 0b 1b Halted 1b 0b Running 1b 1b Invalid - the HCHalted bit clears immediately Memory read cycles initiated by the EHC that receive any status other than Successful will result in this bit being cleared. NOTE: The Command Register indicates the command to be executed by the serial bus host controller. Writing to the register causes a command to be executed. Datasheet 691 EHCI Controller Registers (D29:F0, D26:F0) 16.2.2.2 USB2.0_STS--USB 2.0 Status Register Offset: Default Value: MEM_BASE + 24h-27h 00001000h Attribute: Size: R/WC, RO 32 bits This register indicates pending interrupts and various states of the Host controller. The status resulting from a transaction on the serial bus is not indicated in this register. See the Interrupts description in section 4 of the EHCI specification for additional information concerning USB 2.0 interrupt conditions. Note: For the writable bits, software must write a 1 to clear bits that are set. Writing a 0 has no effect. Bit 31:16 Description Reserved Asynchronous Schedule Status RO. This bit reports the current real status of the Asynchronous Schedule. 0 = Disabled. (Default) 1 = Enabled. 15 NOTE: The Host controller is not required to immediately disable or enable the Asynchronous Schedule when software transitions the Asynchronous Schedule Enable bit (D29:F0, D26:F0:CAPLENGTH + 20h, bit 5) in the USB2.0_CMD register. When this bit and the Asynchronous Schedule Enable bit are the same value, the Asynchronous Schedule is either enabled (1) or disabled (0). Periodic Schedule Status RO. This bit reports the current real status of the Periodic Schedule. 0 = Disabled. (Default) 1 = Enabled. 14 13 NOTE: The Host controller is not required to immediately disable or enable the Periodic Schedule when software transitions the Periodic Schedule Enable bit (D29:F0, D26:F0:CAPLENGTH + 20h, bit 4) in the USB2.0_CMD register. When this bit and the Periodic Schedule Enable bit are the same value, the Periodic Schedule is either enabled (1) or disabled (0). Reclamation RO. This read-only status bit is used to detect an empty asynchronous schedule. The operational model and valid transitions for this bit are described in Section 4 of the EHCI Specification. HCHalted RO. 12 11:6 5 692 0 = This bit is a 0 when the Run/Stop bit is a 1. 1 = The Host controller sets this bit to 1 after it has stopped executing as a result of the Run/Stop bit being set to 0, either by software or by the Host controller hardware (such as, internal error). (Default) Reserved Interrupt on Async Advance--R/WC. System software can force the host controller to issue an interrupt the next time the host controller advances the asynchronous schedule by writing a 1 to the Interrupt on Async Advance Doorbell bit (D29:F0, D26:F0:CAPLENGTH + 20h, bit 6) in the USB2.0_CMD register. This bit indicates the assertion of that interrupt source. Datasheet EHCI Controller Registers (D29:F0, D26:F0) Bit Description Host System Error--R/WC. 4 0 = No serious error occurred during a host system access involving the Host controller module 1 = The Host controller sets this bit to 1 when a serious error occurs during a host system access involving the Host controller module. A hardware interrupt is generated to the system. Memory read cycles initiated by the EHC that receive any status other than Successful will result in this bit being set. When this error occurs, the Host controller clears the Run/Stop bit in the USB2.0_CMDregister (D29:F0, D26:F0:CAPLENGTH + 20h, bit 0) to prevent further execution of the scheduled TDs. A hardware interrupt is generated to the system (if enabled in the Interrupt Enable Register). Frame List Rollover--R/WC. 3 2 0 = No Frame List Index rollover from its maximum value to 0. 1 = The Host controller sets this bit to a 1 when the Frame List Index rolls over from its maximum value to 0. Since the PCH only supports the 1024-entry Frame List Size, the Frame List Index rolls over every time FRNUM13 toggles. Port Change Detect--R/WC. This bit is allowed to be maintained in the Auxiliary power well. Alternatively, it is also acceptable that on a D3 to D0 transition of the EHCI HC device, this bit is loaded with the OR of all of the PORTSC change bits (including: Force port resume, overcurrent change, enable/disable change and connect status change). Regardless of the implementation, when this bit is readable (that is, in the D0 state), it must provide a valid view of the Port Status registers. 0 = No change bit transition from a 0 to 1 or No Force Port Resume bit transition from 0 to 1 as a result of a J-K transition detected on a suspended port. 1 = The Host controller sets this bit to 1 when any port for which the Port Owner bit is set to 0 has a change bit transition from a 0 to 1 or a Force Port Resume bit transition from 0 to 1 as a result of a J-K transition detected on a suspended port. USB Error Interrupt (USBERRINT)--R/WC. 1 0 = No error condition. 1 = The Host controller sets this bit to 1 when completion of a USB transaction results in an error condition (such as, error counter underflow). If the TD on which the error interrupt occurred also had its IOC bit set, both this bit and Bit 0 are set. See the EHCI specification for a list of the USB errors that will result in this interrupt being asserted. USB Interrupt (USBINT)--R/WC. 0 Datasheet 0 = No completion of a USB transaction whose Transfer Descriptor had its IOC bit set. No short packet is detected. 1 = The Host controller sets this bit to 1 when the cause of an interrupt is a completion of a USB transaction whose Transfer Descriptor had its IOC bit set. The Host controller also sets this bit to 1 when a short packet is detected (actual number of bytes received was less than the expected number of bytes). 693 EHCI Controller Registers (D29:F0, D26:F0) 16.2.2.3 USB2.0_INTR--USB 2.0 Interrupt Enable Register Offset: Default Value: MEM_BASE + 28h-2Bh 00000000h Attribute: Size: R/W 32 bits This register enables and disables reporting of the corresponding interrupt to the software. When a bit is set and the corresponding interrupt is active, an interrupt is generated to the host. Interrupt sources that are disabled in this register still appear in the USB2.0_STS Register to allow the software to poll for events. Each interrupt enable bit description indicates whether it is dependent on the interrupt threshold mechanism (see Section 4 of the EHCI specification), or not. Bit 31:6 Description Reserved Interrupt on Async Advance Enable--R/W. 5 0 = Disable. 1 = Enable. When this bit is a 1, and the Interrupt on Async Advance bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 5) in the USB2.0_STS register is a 1, the host controller will issue an interrupt at the next interrupt threshold. The interrupt is acknowledged by software clearing the Interrupt on Async Advance bit. Host System Error Enable--R/W. 4 0 = Disable. 1 = Enable. When this bit is a 1, and the Host System Error Status bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 4) in the USB2.0_STS register is a 1, the host controller will issue an interrupt. The interrupt is acknowledged by software clearing the Host System Error bit. Frame List Rollover Enable--R/W. 3 0 = Disable. 1 = Enable. When this bit is a 1, and the Frame List Rollover bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 3) in the USB2.0_STS register is a 1, the host controller will issue an interrupt. The interrupt is acknowledged by software clearing the Frame List Rollover bit. Port Change Interrupt Enable--R/W. 2 0 = Disable. 1 = Enable. When this bit is a 1, and the Port Change Detect bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 2) in the USB2.0_STS register is a 1, the host controller will issue an interrupt. The interrupt is acknowledged by software clearing the Port Change Detect bit. USB Error Interrupt Enable--R/W. 1 0 = Disable. 1 = Enable. When this bit is a 1, and the USBERRINT bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 1) in the USB2.0_STS register is a 1, the host controller will issue an interrupt at the next interrupt threshold. The interrupt is acknowledged by software by clearing the USBERRINT bit in the USB2.0_STS register. USB Interrupt Enable--R/W. 0 694 0 = Disable. 1 = Enable. When this bit is a 1, and the USBINT bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 0) in the USB2.0_STS register is a 1, the host controller will issue an interrupt at the next interrupt threshold. The interrupt is acknowledged by software by clearing the USBINT bit in the USB2.0_STS register. Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.2.2.4 FRINDEX--Frame Index Register Offset: Default Value: MEM_BASE + 2Ch-2Fh 00000000h Attribute: Size: R/W 32 bits The SOF frame number value for the bus SOF token is derived or alternatively managed from this register. See Section 4 of the EHCI specification for a detailed explanation of the SOF value management requirements on the host controller. The value of FRINDEX must be within 125 s (1 micro-frame) ahead of the SOF token value. The SOF value may be implemented as an 11-bit shadow register. For this discussion, this shadow register is 11 bits and is named SOFV. SOFV updates every 8 micro-frames (1 millisecond). An example implementation to achieve this behavior is to increment SOFV each time the FRINDEX[2:0] increments from 0 to 1. Software must use the value of FRINDEX to derive the current micro-frame number, both for high-speed isochronous scheduling purposes and to provide the get microframe number function required to client drivers. Therefore, the value of FRINDEX and the value of SOFV must be kept consistent if chip is reset or software writes to FRINDEX. Writes to FRINDEX must also write-through FRINDEX[13:3] to SOFV[10:0]. To keep the update as simple as possible, software should never write a FRINDEX value where the three least significant bits are 111b or 000b. Note: This register is used by the host controller to index into the periodic frame list. The register updates every 125 microseconds (once each micro-frame). Bits [12:3] are used to select a particular entry in the Periodic Frame List during periodic schedule execution. The number of bits used for the index is fixed at 10 for the PCH since it only supports 1024-entry frame lists. This register must be written as a DWord. Word and byte writes produce undefined results. This register cannot be written unless the Host controller is in the Halted state as indicated by the HCHalted bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 12). A write to this register while the Run/Stop bit (D29:F0, D26:F0:CAPLENGTH + 20h, bit 0) is set to a 1 (USB2.0_CMD register) produces undefined results. Writes to this register also effect the SOF value. See Section 4 of the EHCI specification for details. Bit 31:14 13:0 16.2.2.5 Description Reserved Frame List Current Index/Frame Number--R/W. The value in this register increments at the end of each time frame (such as, micro-frame). Bits [12:3] are used for the Frame List current index. This means that each location of the frame list is accessed 8 times (frames or micro-frames) before moving to the next index. CTRLDSSEGMENT--Control Data Structure Segment Register Offset: Default Value: MEM_BASE + 30h-33h 00000000h Attribute: Size: R/W, RO 32 bits This 32-bit register corresponds to the most significant address bits [63:32] for all EHCI data structures. Since the PCH hardwires the 64-bit Addressing Capability field in HCCPARAMS to 1, this register is used with the link pointers to construct 64-bit addresses to EHCI control data structures. This register is concatenated with the link pointer from either the PERIODICLISTBASE, ASYNCLISTADDR, or any control data structure link field to construct a 64-bit address. This register allows the host software to locate all control data structures within the same 4 GB memory segment. Bit 31:12 11:0 Datasheet Description Upper Address[63:44]--RO. Hardwired to 0s. The PCH EHC is only capable of generating addresses up to 16 terabytes (44 bits of address). Upper Address[43:32]--R/W. This 12-bit field corresponds to address bits 43:32 when forming a control data structure address. 695 EHCI Controller Registers (D29:F0, D26:F0) 16.2.2.6 PERIODICLISTBASE--Periodic Frame List Base Address Register Offset: Default Value: MEM_BASE + 34h-37h 00000000h Attribute: Size: R/W 32 bits This 32-bit register contains the beginning address of the Periodic Frame List in the system memory. Since the PCH host controller operates in 64-bit mode (as indicated by the 1 in the 64-bit Addressing Capability field in the HCCSPARAMS register) (offset 08h, bit 0), then the most significant 32 bits of every control data structure address comes from the CTRLDSSEGMENT register. HCD loads this register prior to starting the schedule execution by the host controller. The memory structure referenced by this physical memory pointer is assumed to be 4-Kbyte aligned. The contents of this register are combined with the Frame Index Register (FRINDEX) to enable the Host controller to step through the Periodic Frame List in sequence. Bit 31:12 11:0 16.2.2.7 Description Base Address (Low)--R/W. These bits correspond to memory address signals [31:12], respectively. Reserved ASYNCLISTADDR--Current Asynchronous List Address Register Offset: Default Value: MEM_BASE + 38h-3Bh 00000000h Attribute: Size: R/W 32 bits This 32-bit register contains the address of the next asynchronous queue head to be executed. Since the PCH host controller operates in 64-bit mode (as indicated by a 1 in 64-bit Addressing Capability field in the HCCPARAMS register) (offset 08h, bit 0), then the most significant 32 bits of every control data structure address comes from the CTRLDSSEGMENT register (offset 08h). Bits [4:0] of this register cannot be modified by system software and will always return 0s when read. The memory structure referenced by this physical memory pointer is assumed to be 32-byte aligned. Bit 31:5 4:0 696 Description Link Pointer Low (LPL)--R/W. These bits correspond to memory address signals [31:5], respectively. This field may only reference a Queue Head (QH). Reserved Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.2.2.8 CONFIGFLAG--Configure Flag Register Offset: Default Value: MEM_BASE + 60h-63h 00000000h Attribute: Size: R/W 32 bits This register is in the suspend power well. It is only reset by hardware when the suspend power is initially applied or in response to a host controller reset. Bit 31:1 0 Description Reserved Configure Flag (CF)--R/W. Host software sets this bit as the last action in its process of configuring the Host controller. This bit controls the default port-routing control logic. Bit values and side-effects are listed below. See section 4 of the EHCI spec for operation details. 0 = Compatibility debug only (default). 1 = Port routing control logic default-routes all ports to this host controller. 16.2.2.9 PORTSC--Port N Status and Control Register When RMH is disabled: Offset: Port 0, Port 8: MEM_BASE + 64h-67h Port 1, Port 9: MEM_BASE + 68-6Bh Port 2, Port 10: MEM_BASE + 6C-6Fh Port 3, Port 11: MEM_BASE + 70-73h Port 4: Port 12: MEM_BASE + 74-77h Port 5: Port 13: MEM_BASE + 78-7Bh Port 6: MEM_BASE + 7Ch-7Bh Port 7: MEM_BASE + 80h-83h When RMH is enabled: Offset: Port 0 RMH: MEM_BASE + 64h-67h Port 1 Debug Port: MEM_BASE + 68-6Bh Port 2 USB redirect (if enabled): MEM_BASE + 6C-6Fh Attribute: Default Value: Note: R/W, R/WC, RO 00003000h Size: 32 bits When RMH is enabled this register is associated with the upstream ports of the EHCI controller and does not represent downstream hub ports. USB Hub class commands must be used to determine RMH port status and enable test modes. See Chapter 11 of the USB Specification, Revision 2.0 for more details. Rate Matching Hub wake capabilities can be configured by the RMHWKCTL Register (RCBA+35B0h) located in the Chipset Configuration chapter. A host controller must implement one or more port registers. Software uses the N_Port information from the Structural Parameters Register to determine how many ports need to be serviced. All ports have the structure defined below. Software must not write to unreported Port Status and Control Registers. This register is in the suspend power well. It is only reset by hardware when the suspend power is initially applied or in response to a host controller reset. The initial conditions of a port are: * No device connected * Port disabled. Datasheet 697 EHCI Controller Registers (D29:F0, D26:F0) When a device is attached, the port state transitions to the attached state and system software will process this as with any status change notification. See Section 4 of the EHCI specification for operational requirements for how change events interact with port suspend mode. Bit 31:23 Description Reserved Wake on Overcurrent Enable (WKOC_E)--R/W. 22 0 = Disable. (Default) 1 = Enable. Writing this bit to a 1 enables the setting of the PME Status bit in the Power Management Control/Status Register (offset 54, bit 15) when the overcurrent Active bit (bit 4 of this register) is set. Wake on Disconnect Enable (WKDSCNNT_E)--R/W. 21 0 = Disable. (Default) 1 = Enable. Writing this bit to a 1 enables the setting of the PME Status bit in the Power Management Control/Status Register (offset 54, bit 15) when the Current Connect Status changes from connected to disconnected (that is, bit 0 of this register changes from 1 to 0). Wake on Connect Enable (WKCNNT_E)--R/W. 20 0 = Disable. (Default) 1 = Enable. Writing this bit to a 1 enables the setting of the PME Status bit in the Power Management Control/Status Register (offset 54, bit 15) when the Current Connect Status changes from disconnected to connected (that is, bit 0 of this register changes from 0 to 1). Port Test Control--R/W. When this field is 0s, the port is NOT operating in a test mode. A non-zero value indicates that it is operating in test mode and the specific test mode is indicated by the specific value. The encoding of the test mode bits are (0110b - 1111b are reserved): 19:16 Value Maximum Interrupt Interval 0000b Test mode not enabled (default) 0001b Test J_STATE 0010b Test K_STATE 0011b Test SE0_NAK 0100b Test Packet 0101b FORCE_ENABLE See the USB Specification Revision 2.0, Chapter 7 for details on each test mode. 15:14 Reserved Port Owner--R/W. This bit unconditionally goes to a 0 when the Configured Flag bit in the USB2.0_CMD register makes a 0 to 1 transition. 13 12 698 System software uses this field to release ownership of the port to a selected host controller (in the event that the attached device is not a high-speed device). Software writes a 1 to this bit when the attached device is not a high-speed device. A 1 in this bit means that a companion host controller owns and controls the port. See Section 4 of the EHCI Specification for operational details. Port Power (PP)--RO. Read-only with a value of 1. This indicates that the port does have power. Datasheet EHCI Controller Registers (D29:F0, D26:F0) Bit 11:10 9 Description Line Status--RO.These bits reflect the current logical levels of the D+ (bit 11) and D- (bit 10) signal lines. These bits are used for detection of low-speed USB devices prior to the port reset and enable sequence. This field is valid only when the port enable bit is 0 and the current connect status bit is set to a 1. 00 10 01 11 = = = = SE0 J-state K-state Undefined Reserved Port Reset--R/W. When software writes a 1 to this bit (from a 0), the bus reset sequence as defined in the USB Specification, Revision 2.0 is started. Software writes a 0 to this bit to terminate the bus reset sequence. Software must keep this bit at a 1 long enough to ensure the reset sequence completes as specified in the USB Specification, Revision 2.0. 1 = Port is in Reset. 0 = Port is not in Reset. 8 NOTE: When software writes a 0 to this bit, there may be a delay before the bit status changes to a 0. The bit status will not read as a 0 until after the reset has completed. If the port is in high-speed mode after reset is complete, the host controller will automatically enable this port (such as, set the Port Enable bit to a 1). A host controller must terminate the reset and stabilize the state of the port within 2 milliseconds of software transitioning this bit from 0 to 1. For example: if the port detects that the attached device is high-speed during reset, then the host controller must have the port in the enabled state within 2 ms of software writing this bit to a 0. The HCHalted bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 12) in the USB2.0_STS register should be a 0 before software attempts to use this bit. The host controller may hold Port Reset asserted to a 1 when the HCHalted bit is a 1. This bit is 0 if Port Power is 0 NOTE: System software should not attempt to reset a port if the HCHalted bit in the USB2.0_STS register is a 1. Doing so will result in undefined behavior. Suspend--R/W. 0 = Port not in suspend state.(Default) 1 = Port in suspend state. Port Enabled Bit and Suspend bit of this register define the port states as follows: 7 Port Enabled Suspend Port State 0 X Disabled 1 0 Enabled 1 1 Suspend When in suspend state, downstream propagation of data is blocked on this port, except for port reset. Note that the bit status does not change until the port is suspended and that there may be a delay in suspending a port depending on the activity on the port. The host controller will unconditionally set this bit to a 0 when software sets the Force Port Resume bit to a 0 (from a 1). A write of 0 to this bit is ignored by the host controller. If host software sets this bit to a 1 when the port is not enabled (that is, Port enabled bit is a 0) the results are undefined. Datasheet 699 EHCI Controller Registers (D29:F0, D26:F0) Bit Description Force Port Resume--R/W. 6 0 = No resume (K-state) detected/driven on port. (Default) 1 = Resume detected/driven on port. Software sets this bit to a 1 to drive resume signaling. The Host controller sets this bit to a 1 if a J-to-K transition is detected while the port is in the Suspend state. When this bit transitions to a 1 because a Jto-K transition is detected, the Port Change Detect bit (D29:F0, D26:F0:CAPLENGTH + 24h, bit 2) in the USB2.0_STS register is also set to a 1. If software sets this bit to a 1, the host controller must not set the Port Change Detect bit. NOTE: When the EHCI controller owns the port, the resume sequence follows the defined sequence documented in the USB Specification, Revision 2.0. The resume signaling (Full-speed 'K') is driven on the port as long as this bit remains a 1. Software must appropriately time the Resume and set this bit to a 0 when the appropriate amount of time has elapsed. Writing a 0 (from 1) causes the port to return to high-speed mode (forcing the bus below the port into a high-speed idle). This bit will remain a 1 until the port has switched to the high-speed idle. 5 Overcurrent Change--R/WC. The functionality of this bit is not dependent upon the port owner. Software clears this bit by writing a 1 to it. 0 = No change. (Default) 1 = There is a change to Overcurrent Active. Overcurrent Active--RO. 4 3 0 = This port does not have an overcurrent condition. (Default) 1 = This port currently has an overcurrent condition. This bit will automatically transition from 1 to 0 when the over current condition is removed. The PCH automatically disables the port when the overcurrent active bit is 1. Port Enable/Disable Change--R/WC. For the root hub, this bit gets set to a 1 only when a port is disabled due to the appropriate conditions existing at the EOF2 point (See Chapter 11 of the USB Specification for the definition of a port error). This bit is not set due to the Disabled-to-Enabled transition, nor due to a disconnect. Software clears this bit by writing a 1 to it. 0 = No change in status. (Default). 1 = Port enabled/disabled status has changed. 2 Port Enabled/Disabled--R/W. Ports can only be enabled by the host controller as a part of the reset and enable. Software cannot enable a port by writing a 1 to this bit. Ports can be disabled by either a fault condition (disconnect event or other fault condition) or by host software. Note that the bit status does not change until the port state actually changes. There may be a delay in disabling or enabling a port due to other host controller and bus events. 0 = Disable 1 = Enable (Default) Connect Status Change--R/WC. This bit indicates a change has occurred in the port's Current Connect Status. Software sets this bit to 0 by writing a 1 to it. 1 0 0 = No change (Default). 1 = Change in Current Connect Status. The host controller sets this bit for all changes to the port device connect status, even if system software has not cleared an existing connect status change. For example, the insertion status changes twice before system software has cleared the changed condition, hub hardware will be "setting" an already-set bit (that is, the bit will remain set). Current Connect Status--RO. This value reflects the current state of the port, and may not correspond directly to the event that caused the Connect Status Change bit (Bit 1) to be set. 0 = No device is present. (Default) 1 = Device is present on port. 700 Datasheet EHCI Controller Registers (D29:F0, D26:F0) 16.2.3 USB 2.0-Based Debug Port Registers The Debug port's registers are located in the same memory area, defined by the Base Address Register (MEM_BASE), as the standard EHCI registers. The base offset for the debug port registers (A0h) is declared in the Debug Port Base Offset Capability Register at Configuration offset 5Ah (D29:F0, D26:F0:offset 5Ah). The specific EHCI port that supports this debug capability (Port 1 for D29:F0 and Port 9 for D26:F0) is indicated by a 4-bit field (bits 20-23) in the HCSPARAMS register of the EHCI controller. The address map of the Debug Port registers is shown in Table 16-4. Table 16-4. Debug Port Register Address Map MEM_BASE + Offset Mnemonic A0-A3h CNTL_STS A4-A7h USBPID A8-AFh DATABUF[7:0] B0-B3h CONFIG Register Name Default Type Control/Status 00000000h R/W, R/WC, RO USB PIDs 00000000h R/W, RO Data Buffer (Bytes 7:0) Configuration 00000000 00000000h 00007F01h R/W R/W NOTES: 1. All of these registers are implemented in the core well and reset by PLTRST#, EHC HCRESET, and a EHC D3-to-D0 transition. 2. The hardware associated with this register provides no checks to ensure that software programs the interface correctly. How the hardware behaves when programmed improperly is undefined. Datasheet 701 EHCI Controller Registers (D29:F0, D26:F0) 16.2.3.1 CNTL_STS--Control/Status Register Offset: Default Value: MEM_BASE + A0h 00000000h Bit 31 Attribute: Size: R/W, R/WC, RO 32 bits Description Reserved OWNER_CNT--R/W. 30 29 0 = Ownership of the debug port is NOT forced to the EHCI controller (Default) 1 = Ownership of the debug port is forced to the EHCI controller (that is, immediately taken away from the companion Classic USB Host controller) If the port was already owned by the EHCI controller, then setting this bit has no effect. This bit overrides all of the ownership-related bits in the standard EHCI registers. Reserved ENABLED_CNT--R/W. 28 27:17 0 = Software can clear this by writing a 0 to it. The hardware clears this bit for the same conditions where the Port Enable/Disable Change bit (in the PORTSC register) is set. (Default) 1 = Debug port is enabled for operation. Software can directly set this bit if the port is already enabled in the associated PORTSC register (this is enforced by the hardware). Reserved DONE_STS--R/WC. Software can clear this by writing a 1 to it. 16 15:12 0 = Request Not complete 1 = Set by hardware to indicate that the request is complete. LINK_ID_STS--RO. This field identifies the link interface. 0h = Hardwired. Indicates that it is a USB Debug Port. 11 Reserved 10 IN_USE_CNT--R/W. Set by software to indicate that the port is in use. Cleared by software to indicate that the port is free and may be used by other software. This bit is cleared after reset. (This bit has no affect on hardware.) EXCEPTION_STS--RO. This field indicates the exception when the ERROR_GOOD#_STS bit is set. This field should be ignored if the ERROR_GOOD#_STS bit is 0. 9:7 000 =No Error. (Default) NOTE: This should not be seen since this field should only be checked if there is an error. 001 =Transaction error: Indicates the USB 2.0 transaction had an error (CRC, bad PID, timeout, etc.) 010 =Hardware error. Request was attempted (or in progress) when port was suspended or reset. All Other combinations are reserved 702 Datasheet EHCI Controller Registers (D29:F0, D26:F0) Bit Description ERROR_GOOD#_STS--RO. 6 0 = Hardware clears this bit to 0 after the proper completion of a read or write. (Default) 1 = Error has occurred. Details on the nature of the error are provided in the Exception field. GO_CNT--R/W. 5 0 = Hardware clears this bit when hardware sets the DONE_STS bit. (Default) 1 = Causes hardware to perform a read or write request. NOTE: Writing a 1 to this bit when it is already set may result in undefined behavior. 4 WRITE_READ#_CNT--R/W. Software clears this bit to indicate that the current request is a read. Software sets this bit to indicate that the current request is a write. 0 = Read (Default) 1 = Write DATA_LEN_CNT--R/W. This field is used to indicate the size of the data to be transferred. default = 0h. 3:0 For write operations, this field is set by software to indicate to the hardware how many bytes of data in Data Buffer are to be transferred to the console. A value of 0h indicates that a zero-length packet should be sent. A value of 1-8 indicates 1-8 bytes are to be transferred. Values 9-Fh are invalid and how hardware behaves if used is undefined. For read operations, this field is set by hardware to indicate to software how many bytes in Data Buffer are valid in response to a read operation. A value of 0h indicates that a zero length packet was returned and the state of Data Buffer is not defined. A value of 1-8 indicates 1-8 bytes were received. Hardware is not allowed to return values 9-Fh. The transferring of data always starts with byte 0 in the data area and moves toward byte 7 until the transfer size is reached. NOTES: 1. Software should do Read-Modify-Write operations to this register to preserve the contents of bits not being modified. This include Reserved bits. 2. To preserve the usage of RESERVED bits in the future, software should always write the same value read from the bit until it is defined. Reserved bits will always return 0 when read. Datasheet 703 EHCI Controller Registers (D29:F0, D26:F0) 16.2.3.2 USBPID--USB PIDs Register Offset: Default Value: MEM_BASE + A4h-A7h 00000000h Attribute: Size: R/W, RO 32 bits This Dword register is used to communicate PID information between the USB debug driver and the USB debug port. The debug port uses some of these fields to generate USB packets, and uses other fields to return PID information to the USB debug driver. Bit 31:24 Reserved 23:16 RECEIVED_PID_STS[23:16]--RO. Hardware updates this field with the received PID for transactions in either direction. When the controller is writing data, this field is updated with the handshake PID that is received from the device. When the host controller is reading data, this field is updated with the data packet PID (if the device sent data), or the handshake PID (if the device NAKs the request). This field is valid when the hardware clears the GO_DONE#_CNT bit. 15:8 7:0 16.2.3.3 Description SEND_PID_CNT[15:8]--R/W. Hardware sends this PID to begin the data packet when sending data to USB (that is, WRITE_READ#_CNT is asserted). Software typically sets this field to either DATA0 or DATA1 PID values. TOKEN_PID_CNT[7:0]--R/W. Hardware sends this PID as the Token PID for each USB transaction. Software typically sets this field to either IN, OUT, or SETUP PID values. DATABUF[7:0]--Data Buffer Bytes[7:0] Register Offset: Default Value: MEM_BASE + A8h-AFh 0000000000000000h Attribute: Size: R/W 64 bits This register can be accessed as 8 separate 8-bit registers or 2 separate 32-bit register. Bit Description DATABUFFER[63:0]--R/W. This field is the 8 bytes of the data buffer. Bits 7:0 correspond to least significant byte (byte 0). Bits 63:56 correspond to the most significant byte (byte 7). 63:0 16.2.3.4 The bytes in the Data Buffer must be written with data before software initiates a write request. For a read request, the Data Buffer contains valid data when DONE_STS bit (offset A0, bit 16) is cleared by the hardware, ERROR_GOOD#_STS (offset A0, bit 6) is cleared by the hardware, and the DATA_LENGTH_CNT field (offset A0, bits 3:0) indicates the number of bytes that are valid. CONFIG--Configuration Register Offset: Default Value: MEM_BASE + B0-B3h 00007F01h Bit 31:15 14:8 Attribute: Size: R/W 32 bits Description Reserved USB_ADDRESS_CNF--R/W. This 7-bit field identifies the USB device address used by the controller for all Token PID generation. (Default = 7Fh) 7:4 Reserved 3:0 USB_ENDPOINT_CNF--R/W. This 4-bit field identifies the endpoint used by the controller for all Token PID generation. (Default = 1h) 704 Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17 Intel(R) High Definition Audio Controller Registers (D27:F0) The Intel(R) High Definition Audio controller resides in PCI Device 27, Function 0 on bus 0. This function contains a set of DMA engines that are used to move samples of digitally encoded data between system memory and external codecs. Note: All registers in this function (including memory-mapped registers) must be addressable in byte, word, and DWord quantities. The software must always make register accesses on natural boundaries (that is, DWord accesses must be on DWord boundaries; word accesses on word boundaries, etc.). Register access crossing the DWord boundary are ignored. In addition, the memory-mapped register space must not be accessed with the LOCK semantic exclusive-access mechanism. If software attempts exclusive-access mechanisms to the Intel(R) High Definition Audio memory-mapped space, the results are undefined. Note: Users interested in providing feedback on the Intel(R) High Definition Audio specification or planning to implement the Intel(R) High Definition Audio specification into a future product will need to execute the Intel(R) High Definition Audio Specification Developer's Agreement. For more information, contact nextgenaudio@intel.com. 17.1 Intel(R) High Definition Audio PCI Configuration Space (Intel(R) High Definition Audio--D27:F0) Note: Address locations that are not shown should be treated as Reserved. Table 17-1. Intel(R) High Definition Audio PCI Register Address Map (Intel(R) High Definition Audio D27:F0) (Sheet 1 of 2) Datasheet Offset Mnemonic 00h-01h VID Register Name Default Access Vendor Identification 8086h RO Device Identification See register description RO 02h-03h DID 04h-05h PCICMD PCI Command 0000h R/W, RO 06h-07h PCISTS PCI Status 0010h R/WC, RO 08h RID Revision Identification See register description RO 09h PI Programming Interface 00h RO 0Ah SCC Sub Class Code 03h RO 0Bh BCC Base Class Code 04h RO 0Ch CLS Cache Line Size 00h R/W 0Dh LT Latency Timer 00h RO 0Eh HEADTYP Header Type 00h RO 10h-13h HDBARL Intel(R) High Definition Audio Lower Base Address (Memory) 00000004h R/W, RO 14h-17h HDBARU Intel High Definition Audio Upper Base Address (Memory) 00000000h R/W 2Ch-2Dh SVID Subsystem Vendor Identification 0000h R/WO 2Eh-2Fh SID Subsystem Identification 0000h R/WO 705 Intel(R) High Definition Audio Controller Registers (D27:F0) Table 17-1. Intel(R) High Definition Audio PCI Register Address Map (Intel(R) High Definition Audio D27:F0) (Sheet 2 of 2) Offset Mnemonic Default Access 34h CAPPTR Capability List Pointer 50h RO 3Ch INTLN Interrupt Line 00h R/W 3Dh INTPN Interrupt Pin See Register Description RO 40h HDCTL Intel(R) High Definition Audio Control 01h R/W, RO 43h HDINIT1 Intel High Definition Audio Initialization Register 1 07h RO 44h TCSEL Traffic Class Select 00h R/W 4Ch DCKCTL Docking Control (Mobile Only) 00h R/W, RO 4Dh DCKSTS Docking Status (Mobile Only) 80h R/WO, RO 50h-51h PID PCI Power Management Capability ID 6001h R/WO, RO 52h-53h PC Power Management Capabilities C842h RO 54h-57h PCS Power Management Control and Status 00000000h R/W, RO, R/WC 60h-61h MID MSI Capability ID 7005h RO 62h-63h MMC MSI Message Control 0080h R/W, RO 64h-67h MMLA MSI Message Lower Address 00000000h R/W, RO 68h-6Bh MMUA MSI Message Upper Address 00000000h R/W 6Ch-6Dh MMD 0000h R/W 70h-71h PXID PCI Express* Capability Identifiers 0010h RO 72h-73h PXC PCI Express Capabilities 0091h RO 74h-77h DEVCAP 78h-79h DEVC 7Ah-7Bh DEVS 100h-103h VCCAP MSI Message Data Device Capabilities 10000000h RO, R/WO Device Control 0800h R/W, RO Device Status 0010h RO Virtual Channel Enhanced Capability Header 13010002h R/WO RO 104h-107h PVCCAP1 Port VC Capability Register 1 00000001h 108h-10Bh PVCCAP2 Port VC Capability Register 2 00000000h RO 10Ch-10D PVCCTL Port VC Control 0000h RO 10Eh-10Fh PVCSTS Port VC Status 0000h RO 110h-113h VC0CAP VC0 Resource Capability 00000000h RO 114h-117h VC0CTL VC0 Resource Control 800000FFh R/W, RO 11Ah-11Bh VC0STS VC0 Resource Status 0000h RO 11Ch-11Fh VCiCAP VCi Resource Capability 00000000h RO 120h-123h VCiCTL VCi Resource Control 00000000h R/W, RO 126h-127h VCiSTS VCi Resource Status 0000h RO RCCAP Root Complex Link Declaration Enhanced Capability Header 00010005h RO 130h-133h 706 Register Name 134h-137h ESD Element Self Description 0F000100h RO 140h-143h L1DESC Link 1 Description 00000001h RO 148h-14Bh L1ADDL Link 1 Lower Address See Register Description RO 14Ch-14Fh L1ADDU Link 1 Upper Address 00000000h RO Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.1 VID--Vendor Identification Register (Intel(R) High Definition Audio Controller--D27:F0) Offset: Default Value: 00h-01h 8086h Bit 15:0 17.1.2 RO 16 bits Description Vendor ID--RO. This is a 16-bit value assigned to Intel. Intel VID = 8086h DID--Device Identification Register (Intel(R) High Definition Audio Controller--D27:F0) Offset Address: 02h-03h Default Value: See bit description Bit 15:0 Datasheet Attribute: Size: Attribute: Size: RO 16 bits Description Device ID--RO. This is a 16-bit value assigned to the PCH's Intel(R) High Definition Audio controller. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register. 707 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.3 PCICMD--PCI Command Register (Intel(R) High Definition Audio Controller--D27:F0) Offset Address: 04h-05h Default Value: 0000h Bit 15:11 Attribute: Size: R/W, RO 16 bits Description Reserved Interrupt Disable (ID)--R/W. 0= The INTx# signals may be asserted. 10 1= The Intel(R) High Definition Audio controller's INTx# signal will be de-asserted. NOTE: This bit does not affect the generation of MSIs. 9 Fast Back to Back Enable (FBE)--RO. Not implemented. Hardwired to 0. 8 SERR# Enable (SERR_EN)--R/W. SERR# is not generated by the PCH Intel(R) High Definition Audio Controller. 7 Wait Cycle Control (WCC)--RO. Not implemented. Hardwired to 0. 6 Parity Error Response (PER)--R/W. PER functionality not implemented. 5 VGA Palette Snoop (VPS). Not implemented. Hardwired to 0. 4 Memory Write and Invalidate Enable (MWIE)--RO. Not implemented. Hardwired to 0. 3 Special Cycle Enable (SCE). Not implemented. Hardwired to 0. 2 Bus Master Enable (BME)--R/W. Controls standard PCI Express* bus mastering capabilities for Memory and I/O, reads and writes. Note that this bit also controls MSI generation since MSI's are essentially Memory writes. 0 = Disable 1 = Enable 1 0 708 Memory Space Enable (MSE)--R/W. Enables memory space addresses to the Intel(R) High Definition Audio controller. 0 = Disable 1 = Enable I/O Space Enable (IOSE)--RO. Hardwired to 0 since the Intel(R) High Definition Audio controller does not implement I/O space. Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.4 PCISTS--PCI Status Register (Intel(R) High Definition Audio Controller--D27:F0) Offset Address: 06h-07h Default Value: 0010h Bit 15 14 Attribute: Size: RO, R/WC 16 bits Description Detected Parity Error (DPE)--RO. Not implemented. Hardwired to 0. SERR# Status (SERRS)--RO. Not implemented. Hardwired to 0. Received Master Abort (RMA)--R/WC. Software clears this bit by writing a 1 to it. 13 0 = No master abort received. 1 = The Intel(R) High Definition Audio controller sets this bit when, as a bus master, it receives a master abort. When set, the Intel(R) High Definition Audio controller clears the run bit for the channel that received the abort. 12 Received Target Abort (RTA)--RO. Not implemented. Hardwired to 0. 11 Signaled Target Abort (STA)--RO. Not implemented. Hardwired to 0. 10:9 DEVSEL# Timing Status (DEV_STS)--RO. Does not apply. Hardwired to 0. 8 Data Parity Error Detected (DPED)--RO. Not implemented. Hardwired to 0. 7 Fast Back to Back Capable (FB2BC)--RO. Does not apply. Hardwired to 0. 6 Reserved 5 66 MHz Capable (66MHZ_CAP)--RO. Does not apply. Hardwired to 0. 4 Capabilities List (CAP_LIST)--RO. Hardwired to 1. Indicates that the controller contains a capabilities pointer list. The first item is pointed to by looking at configuration offset 34h. Interrupt Status (IS)--RO. 3 0 = This bit is 0 after the interrupt is cleared. 1 = This bit is 1 when the INTx# is asserted. Note that this bit is not set by an MSI. 2:0 Datasheet Reserved 709 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.5 RID--Revision Identification Register (Intel(R) High Definition Audio Controller--D27:F0) Offset: Default Value: 08h See bit description Bit 7:0 17.1.6 Description Revision ID--RO. See the 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Revision ID Register PI--Programming Interface Register (Intel(R) High Definition Audio Controller--D27:F0) 09h 00h Bit 7:0 SCC--Sub Class Code Register (Intel(R) High Definition Audio Controller--D27:F0) 7:0 Attribute: Size: RO 8 bits Description Sub Class Code (SCC)--RO. 03h = Audio Device BCC--Base Class Code Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 0Bh Default Value: 04h Bit 7:0 Attribute: Size: RO 8 bits Description Base Class Code (BCC)--RO. 04h = Multimedia device CLS--Cache Line Size Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 0Ch Default Value: 00h 710 RO 8 bits Programming Interface--RO. Bit 17.1.9 Attribute: Size: Description Address Offset: 0Ah Default Value: 03h 17.1.8 RO 8 Bits Intel(R) Offset: Default Value: 17.1.7 Attribute: Size: Attribute: Size: R/W 8 bits Bit Description 7:0 Cache Line Size--R/W. Implemented as R/W register, but has no functional impact to the PCH Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.10 LT--Latency Timer Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 0Dh Default Value: 00h Bit 7:0 17.1.11 Latency Timer--RO. Hardwired to 00 HEADTYP--Header Type Register (Intel(R) High Definition Audio Controller--D27:F0) Bit 7:0 RO 8 bits Header Type--RO. Hardwired to 00. HDBARL--Intel(R) High Definition Audio Lower Base Address Register (Intel(R) High Definition Audio--D27:F0) Attribute: Size: R/W, RO 32 bits Bit Description 31:14 Lower Base Address (LBA)--R/W. Base address for the Intel(R) High Definition Audio controller's memory mapped configuration registers. 16 Kbytes are requested by hardwiring bits 13:4 to 0s. 13:4 3 Reserved Prefetchable (PREF)--RO. Hardwired to 0 to indicate that this BAR is NOT prefetchable 2:1 Address Range (ADDRNG)--RO. Hardwired to 10b, indicating that this BAR can be located anywhere in 64-bit address space. 0 Space Type (SPTYP)--RO. Hardwired to 0. Indicates this BAR is located in memory space. HDBARU--Intel(R) High Definition Audio Upper Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 14h-17h Default Value: 00000000h Bit 31:0 Datasheet Attribute: Size: Description Address Offset: 10h-13h Default Value: 00000004h 17.1.13 RO 8 bits Description Address Offset: 0Eh Default Value: 00h 17.1.12 Attribute: Size: Attribute: Size: R/W 32 bits Description Upper Base Address (UBA)--R/W. Upper 32 bits of the Base address for the Intel(R) High Definition Audio controller's memory mapped configuration registers. 711 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.14 SVID--Subsystem Vendor Identification Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 2Ch-2Dh Default Value: 0000h Function Level Reset: No Attribute: Size: R/WO 16 bits The SVID register, in combination with the Subsystem ID register (D27:F0:2Eh), enable the operating environment to distinguish one audio subsystem from the other(s). This register is implemented as write-once register. Once a value is written to it, the value can be read back. Any subsequent writes will have no effect. This register is not affected by the D3HOT to D0 transition. Bit 15:0 17.1.15 Description Subsystem Vendor ID--R/WO. SID--Subsystem Identification Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 2Eh-2Fh Default Value: 0000h Function Level Reset: No Attribute: Size: R/WO 16 bits The SID register, in combination with the Subsystem Vendor ID register (D27:F0:2Ch) make it possible for the operating environment to distinguish one audio subsystem from the other(s). This register is implemented as write-once register. Once a value is written to it, the value can be read back. Any subsequent writes will have no effect. T This register is not affected by the D3HOT to D0 transition. Bit 15:0 17.1.16 Description Subsystem ID--R/WO. CAPPTR--Capabilities Pointer Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 34h Default Value: 50h Attribute: Size: RO 8 bits This register indicates the offset for the capability pointer. Bit 7:0 712 Description Capabilities Pointer (CAP_PTR)--RO. This field indicates that the first capability pointer offset is offset 50h (Power Management Capability) Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.17 INTLN--Interrupt Line Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 3Ch Default Value: 00h Bit 7:0 Attribute: Size: R/W 8 bits Description Interrupt Line (INT_LN)--R/W. This data is not used by the PCH. It is used to communicate to software the interrupt line that the interrupt pin is connected to. Note: This register is not reset by a Function Level Reset. 17.1.18 INTPN--Interrupt Pin Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 3Dh Default Value: See Description Bit 17.1.19 7:4 Reserved 3:0 Interrupt Pin--RO. This reflects the value of D27IP.ZIP (Chipset Config Registers:Offset 3110h:bits 3:0). HDCTL--Intel(R) High Definition Audio Control Register (Intel(R) High Definition Audio Controller--D27:F0) Bit 7:1 0 Attribute: Size: RO 8 bits Description Reserved Intel(R) High Definition Signal Mode--RO. This bit is hardwired to 1 (High Definition Audio mode). HDINIT1--Intel(R) High Definition Audio Initialization Register 1 (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 43h Default Value: 07h Bit Datasheet RO 8 bits Description Address Offset: 40h Default Value: 01h 17.1.20 Attribute: Size: Attribute: Size: RO 8 bits Description 7 Reserved 6 HDINIT1 Field 2--R/W. BIOS must set this bit to 1. 5:3 Reserved 2:0 HDINIT1 Field 1--R/W. BIOS must program this field to 111b. 713 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.21 TCSEL--Traffic Class Select Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 44h Default Value: 00h Function Level Reset: No Attribute: Size: R/W 8 bits This register assigned the value to be placed in the TC field. CORB and RIRB data will always be assigned TC0. Bit 7:3 Description Reserved Intel(R) HIgh Definition Audio Traffic Class Assignment (TCSEL)--R/W. This register assigns the value to be placed in the Traffic Class field for input data, output data, and buffer descriptor transactions. 000 = TC0 001 = TC1 010 = TC2 2:0 011 = TC3 100 = TC4 101 = TC5 110 = TC6 111 = TC7 NOTE: These bits are not reset on D3HOT to D0 transition; however, they are reset by PLTRST#. 17.1.22 DCKCTL--Docking Control Register (Mobile Only) (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 4Ch Default Value: 00h Function Level Reset: No Bit 7:1 Attribute: Size: R/W, RO 8 bits Description Reserved Dock Attach (DA)--R/W / RO. Software writes a 1 to this bit to initiate the docking sequence on the HDA_DOCK_EN# and HDA_DOCK_RST# signals. When the docking sequence is complete, hardware will set the Dock Mated (GSTS.DM) status bit to 1. 0 Software writes a 0 to this bit to initiate the undocking sequence on the HDA_DOCK_EN# and HDA_DOCK_RST# signals. When the undocking sequence is complete, hardware will set the Dock Mated (GSTS.DM) status bit to 0. Note that software must check the state of the Dock Mated (GSTS.DM) bit prior to writing to the Dock Attach bit. Software shall only change the DA bit from 0 to 1 when DM=0. Likewise, software shall only change the DA bit from 1 to 0 when DM=1. If these rules are violated, the results are undefined. Note that this bit is Read Only when the DCKSTS.DS bit = 0. 714 Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.23 DCKSTS--Docking Status Register (Mobile Only) (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: Default Value: Function Level Reset: 4Dh 80h No Bit 7 Attribute: Size: R/WO, RO 8 bits Description Docking Supported (DS)--R/WO: A 1 indicates that PCH supports HD Audio Docking. The DCKCTL.DA bit is only writable when this DS bit is 1. ACPI BIOS software should only branch to the docking routine when this DS bit is 1. BIOS may clear this bit to 0 to prohibit the ACPI BIOS software from attempting to run the docking routines. Note that this bit is reset to its default value only on a PLTRST#, but not on a CRST# or D3hot-to-D0 transition. 6:1 Reserved Dock Mated (DM)--RO: This bit effectively communicates to software that an Intel(R) HD Audio docked codec is physically and electrically attached. 0 Controller hardware sets this bit to 1 after the docking sequence triggered by writing a 1 to the Dock Attach (GCTL.DA) bit is completed (HDA_DOCK_RST# de-assertion). This bit indicates to software that the docked codec(s) may be discovered using the STATESTS register and then enumerated. Controller hardware sets this bit to 0 after the undocking sequence triggered by writing a 0 to the Dock Attach (GCTL.DA) bit is completed (HDA_DOCK_EN# de-asserted). This bit indicates to software that the docked codec(s) may be physically undocked. 17.1.24 PID--PCI Power Management Capability ID Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: Default Value: Function Level Reset: Bit 15:8 7:0 Datasheet 50h-51h 6001h No (Bits 7:0 only) Attribute: Size: R/WO, RO 16 bits Description Next Capability (Next)--R/WO. Points to the next capability structure (MSI). Cap ID (CAP)--RO. Hardwired to 01h. Indicates that this pointer is a PCI power management capability. These bits are not reset by Function Level Reset. 715 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.25 PC--Power Management Capabilities Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 52h-53h Default Value: C842h Bit 15:11 RO 16 bits Description PME Support--RO. Hardwired to 11001b. Indicates PME# can be generated from D3 and D0 states. 10 D2 Support--RO. Hardwired to 0. Indicates that D2 state is not supported. 9 D1 Support--RO. Hardwired to 0. Indicates that D1 state is not supported. 8:6 Aux Current--RO. Hardwired to 001b. Reports 55 mA maximum suspend well current required when in the D3COLD state. 5 Device Specific Initialization (DSI)--RO. Hardwired to 0. Indicates that no device specific initialization is required. 4 Reserved 3 PME Clock (PMEC)--RO. Does not apply. Hardwired to 0. 2:0 17.1.26 Attribute: Size: Version--RO. Hardwired to 010b. Indicates support for version 1.1 of the PCI Power Management Specification. PCS--Power Management Control and Status Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 54h-57h Default Value: 00000000h Function Level Reset: No Bit 31:24 Attribute: Size: RO, R/W, R/WC 32 bits Description Data--RO. Does not apply. Hardwired to 0. 23 Bus Power/Clock Control Enable--RO. Does not apply. Hardwired to 0. 22 B2/B3 Support--RO. Does not apply. Hardwired to 0. 21:16 Reserved PME Status (PMES)--R/WC. 15 0 = Software clears the bit by writing a 1 to it. 1 = This bit is set when the Intel(R) High Definition Audio controller would normally assert the PME# signal independent of the state of the PME_EN bit (bit 8 in this register). This bit is in the resume well and is cleared by a power-on reset. Software must not make assumptions about the reset state of this bit and must set it appropriately. 14:9 Reserved PME Enable (PMEE)--R/W. 8 0 = Disable 1 = When set and if corresponding PMES also set, the Intel(R) High Definition Audio controller sets the PME_B0_STS bit in the GPE0_STS register (PMBASE +28h). This bit is in the resume well and is cleared on a power-on reset. Software must not make assumptions about the reset state of this bit and must set it appropriately. 7:2 716 Reserved Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) Bit Description Power State (PS)--R/W. This field is used both to determine the current power state of the Intel(R) High Definition Audio controller and to set a new power state. 00 = D0 state 11 = D3HOT state Others = reserved 1:0 17.1.27 NOTES: 1. If software attempts to write a value of 01b or 10b in to this field, the write operation must complete normally; however, the data is discarded and no state change occurs. 2. When in the D3HOT states, the Intel(R) High Definition Audio controller's configuration space is available, but the IO and memory space are not. Additionally, interrupts are blocked. 3. When software changes this value from D3HOT state to the D0 state, an internal warm (soft) reset is generated, and software must re-initialize the function. MID--MSI Capability ID Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 60h-61h Default Value: 7005h RO 16 bits Bit Description 15:8 Next Capability (Next)--RO. Hardwired to 70h. Points to the PCI Express* capability structure. 7:0 17.1.28 Attribute: Size: Cap ID (CAP)--RO. Hardwired to 05h. Indicates that this pointer is a MSI capability MMC--MSI Message Control Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 62h-63h Default Value: 0080h Bit 15:8 7 Attribute: Size: RO, R/W 16 bits Description Reserved 64b Address Capability (64ADD)--RO. Hardwired to 1. Indicates the ability to generate a 64-bit message address 6:4 Multiple Message Enable (MME)--RO. Normally this is a R/W register. However since only 1 message is supported, these bits are hardwired to 000 = 1 message. 3:1 Multiple Message Capable (MMC)--RO. Hardwired to 0 indicating request for 1 message. MSI Enable (ME)--R/W. 0 0 = an MSI may not be generated 1 = an MSI will be generated instead of an INTx signal. Datasheet 717 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.29 MMLA--MSI Message Lower Address Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 64h-67h Default Value: 00000000h Bit 31:2 1:0 17.1.30 Message Lower Address (MLA)--R/W. Lower address used for MSI message. Reserved MMUA--MSI Message Upper Address Register (Intel(R) High Definition Audio Controller--D27:F0) Bit 31:0 R/W 32 bits Message Upper Address (MUA)--R/W. Upper 32-bits of address used for MSI message. MMD--MSI Message Data Register (Intel(R) High Definition Audio Controller--D27:F0) Bit 15:0 Attribute: Size: R/W 16 bits Description Message Data (MD)--R/W. Data used for MSI message. PXID--PCI Express* Capability ID Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 70h-71h Default Value: 0010h Attribute: Size: RO 16 bits Bit Description 15:8 Next Capability (Next)--RO. Hardwired to 0. Indicates that this is the last capability structure in the list. 7:0 718 Attribute: Size: Description Address Offset: 6Ch-6Dh Default Value: 0000h 17.1.32 RO, R/W 32 bits Description Address Offset: 68h-6Bh Default Value: 00000000h 17.1.31 Attribute: Size: Cap ID (CAP)--RO. Hardwired to 10h. Indicates that this pointer is a PCI Express* capability structure. Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.33 PXC--PCI Express* Capabilities Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 72h-73h Default Value: 0091h Bit 15:14 13:9 8 17.1.34 RO 16 bits Description Reserved Interrupt Message Number (IMN)--RO. Hardwired to 0. Slot Implemented (SI)--RO. Hardwired to 0. 7:4 Device/Port Type (DPT)--RO. Hardwired to 1001b. Indicates that this is a Root Complex Integrated endpoint device. 3:0 Capability Version (CV)--RO. Hardwired to 0001b. Indicates version #1 PCI Express capability DEVCAP--Device Capabilities Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: Default Value: Function Level Reset: Bit 31:29 28 74h-77h 10000000h No Attribute: Size: R/WO, RO 32 bits Description Reserved Function Level Reset (FLR)--R/WO. A 1 indicates that the PCH HD Audio Controller supports the Function Level Reset Capability. 27:26 Captured Slot Power Limit Scale (SPLS)--RO. Hardwired to 0. 25:18 Captured Slot Power Limit Value (SPLV)--RO. Hardwired to 0. 17:15 Reserved 14 Power Indicator Present--RO. Hardwired to 0. 13 Attention Indicator Present--RO. Hardwired to 0. 12 Attention Button Present--RO. Hardwired to 0. 11:9 8:6 Datasheet Attribute: Size: Endpoint L1 Acceptable Latency--R/WO. Endpoint L0s Acceptable Latency--R/WO. 5 Extended Tag Field Support--RO. Hardwired to 0. Indicates 5-bit tag field support 4:3 Phantom Functions Supported--RO. Hardwired to 0. Indicates that phantom functions not supported 2:0 Max Payload Size Supported--RO. Hardwired to 0. Indicates 128-B maximum payload size capability 719 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.35 DEVC--Device Control Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 78h-79h Default Value: 0800h Function Level Reset: No (Bit 11 Only) Attribute: Size: R/W, RO 16 bits Bit Description 15 Initiate FLR (IF)--R/W. This bit is used to initiate FLR transition. 1 = A write of 1 initiates FLR transition. Since hardware does not respond to any cycles until FLR completion, the read value by software from this bit is 0. 14:12 Max Read Request Size--RO. Hardwired to 0 enabling 128B maximum read request size. No Snoop Enable (NSNPEN)--R/W. 11 0 = The Intel(R) High Definition Audio controller will not set the No Snoop bit. In this case, isochronous transfers will not use VC1 (VCi) even if it is enabled since VC1 is never snooped. Isochronous transfers will use VC0. 1 = The Intel(R) High Definition Audio controller is permitted to set the No Snoop bit in the Requester Attributes of a bus master transaction. In this case, VC0 or VC1 may be used for isochronous transfers. NOTE: This bit is not reset on D3HOT to D0 transition; however, it is reset by PLTRST#. This bit is not reset by Function Level Reset. 10 9 Phantom Function Enable--RO. Hardwired to 0 disabling phantom functions. 8 Extended Tag Field Enable--RO. Hardwired to 0 enabling 5-bit tag. 7:5 720 Auxiliary Power Enable--RO. Hardwired to 0, indicating that Intel(R) High Definition Audio device does not draw AUX power Max Payload Size--RO. Hardwired to 0 indicating 128B. 4 Enable Relaxed Ordering--RO. Hardwired to 0 disabling relaxed ordering. 3 Unsupported Request Reporting Enable--R/W. Not implemented. 2 Fatal Error Reporting Enable--R/W. Not implemented. 1 Non-Fatal Error Reporting Enable--R/W. Not implemented. 0 Correctable Error Reporting Enable--R/W. Not implemented. Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.36 DEVS--Device Status Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 7Ah-7Bh Default Value: 0010h Bit 15:6 Attribute: Size: RO 16 bits Description Reserved Transactions Pending--RO. 5 17.1.37 0 = Indicates that completions for all non-posted requests have been received 1 = Indicates that Intel(R) High Definition Audio controller has issued non-posted requests which have not been completed. 4 AUX Power Detected--RO. Hardwired to 1 indicating the device is connected to resume power 3 Unsupported Request Detected--RO. Not implemented. Hardwired to 0. 2 Fatal Error Detected--RO. Not implemented. Hardwired to 0. 1 Non-Fatal Error Detected--RO. Not implemented. Hardwired to 0. 0 Correctable Error Detected--RO. Not implemented. Hardwired to 0. VCCAP--Virtual Channel Enhanced Capability Header (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 100h-103h Default Value: 13010002h Bit Attribute: Size: R/WO 32 bits Description Next Capability Offset--R/WO. Points to the next capability header. 31:20 130h = Root Complex Link Declaration Enhanced Capability Header 000h = Root Complex Link Declaration Enhanced Capability Header is not supported. Capability Version--R/WO. 19:16 0h =PCI Express Virtual channel capability and the Root Complex Topology Capability structure are not supported. 1h =PCI Express Virtual channel capability and the Root Complex Topology Capability structure are supported. PCI Express* Extended Capability--R/WO. 15:0 0000h =PCI Express Virtual channel capability and the Root Complex Topology Capability structure are not supported. 0002h =PCI Express Virtual channel capability and the Root Complex Topology Capability structure are supported. Datasheet 721 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.38 PVCCAP1--Port VC Capability Register 1 (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 104h-107h Default Value: 00000001h Bit Description Reserved 11:10 Port Arbitration Table Entry Size--RO. Hardwired to 0 since this is an endpoint device. 7 6:4 3 2:0 Reference Clock--RO. Hardwired to 0 since this is an endpoint device. Reserved Low Priority Extended VC Count--RO. Hardwired to 0. Indicates that only VC0 belongs to the low priority VC group Reserved Extended VC Count--RO. Hardwired to 001b. Indicates that 1 extended VC (in addition to VC0) is supported by the Intel(R) High Definition Audio controller. PVCCAP2--Port VC Capability Register 2 (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 108h-10Bh Default Value: 00000000h RO 32 bits Description 31:24 VC Arbitration Table Offset--RO. Hardwired to 0 indicating that a VC arbitration table is not present. 7:0 Reserved VC Arbitration Capability--RO. Hardwired to 0. These bits are not applicable since the Intel(R) High Definition Audio controller reports a 0 in the Low Priority Extended VC Count bits in the PVCCAP1 register. PVCCTL--Port VC Control Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 10Ch-10Dh Default Value: 0000h Bit 15:4 722 Attribute: Size: Bit 23:8 17.1.40 RO 32 bits 31:12 9:8 17.1.39 Attribute: Size: Attribute: Size: RO 16 bits Description Reserved 3:1 VC Arbitration Select--RO. Hardwired to 0. Normally these bits are R/W. However, these bits are not applicable since the Intel(R) High Definition Audio controller reports a 0 in the Low Priority Extended VC Count bits in the PVCCAP1 register 0 Load VC Arbitration Table--RO. Hardwired to 0 since an arbitration table is not present. Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.41 PVCSTS--Port VC Status Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 10Eh-10Fh Default Value: 0000h Bit 15:1 0 17.1.42 RO 16 bits Description Reserved VC Arbitration Table Status--RO. Hardwired to 0 since an arbitration table is not present. VC0CAP--VC0 Resource Capability Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 110h-113h Default Value: 00000000h Attribute: Size: RO 32 bits Bit Description 31:24 Port Arbitration Table Offset--RO. Hardwired to 0 since this field is not valid for endpoint devices 23 22:16 Reserved Maximum Time Slots--RO. Hardwired to 0 since this field is not valid for endpoint devices 15 Reject Snoop Transactions--RO. Hardwired to 0 since this field is not valid for endpoint devices. 14 Advanced Packet Switching--RO. Hardwired to 0 since this field is not valid for endpoint devices 13:8 7:0 Datasheet Attribute: Size: Reserved Port Arbitration Capability--RO. Hardwired to 0 since this field is not valid for endpoint devices 723 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.43 VC0CTL--VC0 Resource Control Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 114h-117h Default Value: 800000FFh Function Level Reset: No Bit 31 Description VC0 Enable--RO. Hardwired to 1 for VC0. Reserved 26:24 VC0 ID--RO. Hardwired to 0 since the first VC is always assigned as VC0 23:20 Reserved 19:17 Port Arbitration Select--RO. Hardwired to 0 since this field is not valid for endpoint devices 15:8 7:0 Load Port Arbitration Table--RO. Hardwired to 0 since this field is not valid for endpoint devices Reserved TC/VC0 Map--R/W, RO. Bit 0 is hardwired to 1 since TC0 is always mapped VC0. Bits [7:1] are implemented as R/W bits. VC0STS--VC0 Resource Status Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 11Ah-11Bh Default Value: 0000h Bit 15:2 724 R/W, RO 32 bits 30:27 16 17.1.44 Attribute: Size: Attribute: Size: RO 16 bits Description Reserved 1 VC0 Negotiation Pending--RO. Hardwired to 0 since this bit does not apply to the integrated Intel(R) High Definition Audio device 0 Port Arbitration Table Status--RO. Hardwired to 0 since this field is not valid for endpoint devices Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.45 VCiCAP--VCi Resource Capability Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 11Ch-11Fh Default Value: 00000000h RO 32 bits Bit Description 31:24 Port Arbitration Table Offset--RO. Hardwired to 0 since this field is not valid for endpoint devices. 23 22:16 Reserved Maximum Time Slots--RO. Hardwired to 0 since this field is not valid for endpoint devices 15 Reject Snoop Transactions--RO. Hardwired to 0 since this field is not valid for endpoint devices 14 Advanced Packet Switching--RO. Hardwired to 0 since this field is not valid for endpoint devices 13:8 7:0 17.1.46 Attribute: Size: Reserved Port Arbitration Capability--RO. Hardwired to 0 since this field is not valid for endpoint devices VCiCTL--VCi Resource Control Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: Default Value: Function Level Reset: 120h-123h 00000000h No Bit Attribute: Size: R/W, RO 32 bits Description VCi Enable--R/W. 0 = VCi is disabled 31 1 = VCi is enabled NOTE: This bit is not reset on D3HOT to D0 transition; however, it is reset by PLTRST#. 30:27 Reserved 26:24 VCi ID--R/W. This field assigns a VC ID to the VCi resource. This field is not used by the PCH hardware, but it is R/W to avoid confusing software. 23:20 Reserved 19:17 Port Arbitration Select--RO. Hardwired to 0 since this field is not valid for endpoint devices 16 15:8 7:0 Datasheet Load Port Arbitration Table--RO. Hardwired to 0 since this field is not valid for endpoint devices Reserved TC/VCi Map--R/W, RO. This field indicates the TCs that are mapped to the VCi resource. Bit 0 is hardwired to 0 indicating that it cannot be mapped to VCi. Bits [7:1] are implemented as R/W bits. This field is not used by the PCH hardware, but it is R/W to avoid confusing software. 725 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.47 VCiSTS--VCi Resource Status Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 126h-127h Default Value: 0000h Bit 15:2 17.1.48 Reserved 1 VCi Negotiation Pending--RO. Does not apply. Hardwired to 0. 0 Port Arbitration Table Status--RO. Hardwired to 0 since this field is not valid for endpoint devices. RCCAP--Root Complex Link Declaration Enhanced Capability Header Register (Intel(R) High Definition Audio Controller--D27:F0) Bit Attribute: Size: RO 32 bits Description 31:20 Next Capability Offset--RO. Hardwired to 0 indicating this is the last capability. 19:16 Capability Version--RO. Hardwired to 1h. 15:0 PCI Express* Extended Capability ID--RO. Hardwired to 0005h. ESD--Element Self Description Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 134h-137h Default Value: 0F000100h Bit Attribute: Size: RO 32 bits Description 31:24 Port Number--RO. Hardwired to 0Fh indicating that the Intel(R) High Definition Audio controller is assigned as Port #15d. 23:16 Component ID--RO. This field returns the value of the ESD.CID field of the chip configuration section. ESD.CID is programmed by BIOS. 15:8 726 RO 16 bits Description Address Offset: 130h Default Value: 00010005h 17.1.49 Attribute: Size: Number of Link Entries--RO. The Intel(R) High Definition Audio only connects to one device, the PCH egress port. Therefore, this field reports a value of 1h. 7:4 Reserved 3:0 Element Type (ELTYP)--RO. The Intel(R) High Definition Audio controller is an integrated Root Complex Device. Therefore, the field reports a value of 0h. Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.1.50 L1DESC--Link 1 Description Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 140h-143h Default Value: 00000001h Bit Description Target Port Number--RO. The Intel(R) High Definition Audio controller targets the PCH's Port 0. 23:16 Target Component ID--RO. This field returns the value of the ESD.CID field of the chip configuration section. ESD.CID is programmed by BIOS. Reserved 1 Link Type--RO. Hardwired to 0 indicating Type 0. 0 Link Valid--RO. Hardwired to 1. L1ADDL--Link 1 Lower Address Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 148h-14Bh Default Value: See Register Description Bit 31:14 13:0 17.1.52 Attribute: Size: RO 32 bits Description Link 1 Lower Address--RO. Hardwired to match the RCBA register value in the PCILPC bridge (D31:F0:F0h). Reserved L1ADDU--Link 1 Upper Address Register (Intel(R) High Definition Audio Controller--D27:F0) Address Offset: 14Ch-14Fh Default Value: 00000000h Bit 31:0 Datasheet RO 32 bits 31:24 15:2 17.1.51 Attribute: Size: Attribute: Size: RO 32 bits Description Link 1 Upper Address--RO. Hardwired to 00000000h. 727 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2 Intel(R) High Definition Audio Memory Mapped Configuration Registers (Intel(R) High Definition Audio--D27:F0) The base memory location for these memory mapped configuration registers is specified in the HDBAR register (D27:F0:offset 10h and D27:F0:offset 14h). The individual registers are then accessible at HDBAR + Offset as indicated in Table 17-2. These memory mapped registers must be accessed in byte, word, or DWord quantities. Note: Address locations that are not shown in Table 17-2 should be treated as Reserved. Table 17-2. Intel(R) High Definition Audio PCI Register Address Map (Intel(R) High Definition Audio D27:F0) (Sheet 1 of 4) 728 HDBAR + Offset Mnemonic 00h-01h GCAP Global Capabilities 4401h RO 02h VMIN Minor Version 00h RO 03h VMAJ Major Version 01h RO 04h-05h OUTPAY 003Ch RO Register Name Output Payload Capability 06h-07h INPAY Input Payload Capability 08h-0Bh GCTL Global Control 0Ch-0Dh WAKEEN 0Eh-0Fh STATESTS 10h-11h GSTS 12h-13h Rsv 14h-17h Rsv 18h-19h OUTSTRMPAY 1Ah-1Bh INSTRMPAY 1Ch-1Fh Rsv 20h-23h Default Access 001Dh RO 00000000h R/W Wake Enable 0000h R/W State Change Status 0000h R/WC Global Status 0000h R/WC Reserved 0000h RO Reserved 00000000h RO 0030h RO Output Stream Payload Capability Input Stream Payload Capability 0018h RO Reserved 00000000h RO INTCTL Interrupt Control 00000000h R/W 24h-27h INTSTS Interrupt Status 00000000h RO 30h-33h WALCLK 34-37h Rsv 38h-3Bh SSYNC 40h-43h Wall Clock Counter 00000000h RO Reserved 00000000h RO Stream Synchronization 00000000h R/W CORBLBASE CORB Lower Base Address 00000000h R/W, RO 44h-47h CORBUBASE CORB Upper Base Address 00000000h R/W 48h-49h CORBWP CORB Write Pointer 0000h R/W 4Ah-4Bh CORBRP CORB Read Pointer 0000h R/W, RO 4Ch CORBCTL CORB Control 00h R/W 4Dh CORBST CORB Status 00h R/WC 4Eh CORBSIZE CORB Size 42h RO 50h-53h RIRBLBASE RIRB Lower Base Address 00000000h R/W, RO Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) Table 17-2. Intel(R) High Definition Audio PCI Register Address Map (Intel(R) High Definition Audio D27:F0) (Sheet 2 of 4) HDBAR + Offset Mnemonic 54h-57h RIRBUBASE 58h-59h RIRBWP 5Ah-5Bh Default Access 00000000h R/W RIRB Write Pointer 0000h R/W, RO RINTCNT Response Interrupt Count 0000h R/W RIRB Upper Base Address 5Ch RIRBCTL RIRB Control 00h R/W 5Dh RIRBSTS RIRB Status 00h R/WC 5Eh RIRBSIZE RIRB Size 42h RO 60h-63h IC Immediate Command 00000000h R/W 64h-67h IR Immediate Response 00000000h RO 0000h R/W, R/ WC 68h-69h Datasheet Register Name ICS Immediate Command Status 70h-73h DPLBASE DMA Position Lower Base Address 00000000h R/W, RO 74h-77h DPUBASE DMA Position Upper Base Address 00000000h R/W 80-82h ISD0CTL Input Stream Descriptor 0 (ISD0) Control 040000h R/W, RO 83h ISD0STS ISD0 Status 00h R/WC, RO 84h-87h ISD0LPIB ISD0 Link Position in Buffer 00000000h RO 88h-8Bh ISD0CBL ISD0 Cyclic Buffer Length 00000000h R/W 8Ch-8Dh ISD0LVI ISD0 Last Valid Index 0000h R/W 8Eh-8F ISD0FIFOW ISD0 FIFO Watermark 0004h R/W 90h-91h ISD0FIFOS ISD0 FIFO Size 0077h RO 92h-93h ISD0FMT ISD0 Format 0000h R/W 98h-9Bh ISD0BDPL ISD0 Buffer Descriptor List PointerLower Base Address 00000000h R/W, RO 9Ch-9Fh ISD0BDPU ISD0 Buffer Description List PointerUpper Base Address 00000000h R/W A0h-A2h ISD1CTL Input Stream Descriptor 1(ISD01) Control 040000h R/W, RO A3h ISD1STS ISD1 Status 00h R/WC, RO A4h-A7h ISD1LPIB ISD1 Link Position in Buffer 00000000h RO A8h-ABh ISD1CBL ISD1 Cyclic Buffer Length 00000000h R/W ACh-ADh ISD1LVI ISD1 Last Valid Index 0000h R/W AEh-AFh ISD1FIFOW ISD1 FIFO Watermark 0004h R/W B0h-B1h ISD1FIFOS ISD1 FIFO Size 0077h RO B2h-B3h ISD1FMT ISD1 Format 0000h R/W B8h-BBh ISD1BDPL ISD1 Buffer Descriptor List PointerLower Base Address 00000000h R/W, RO BCh-BFh ISD1BDPU ISD1 Buffer Description List PointerUpper Base Address 00000000h R/W 729 Intel(R) High Definition Audio Controller Registers (D27:F0) Table 17-2. Intel(R) High Definition Audio PCI Register Address Map (Intel(R) High Definition Audio D27:F0) (Sheet 3 of 4) 730 HDBAR + Offset Mnemonic C0h-C2h ISD2CTL Input Stream Descriptor 2 (ISD2) Control Register Name Default Access 040000h R/W, RO C3h ISD2STS ISD2 Status 00h R/WC, RO C4h-C7h ISD2LPIB ISD2 Link Position in Buffer 00000000h RO C8h-CBh ISD2CBL ISD2 Cyclic Buffer Length 00000000h R/W CCh-CDh ISD2LVI ISD2 Last Valid Index 0000h R/W CEh-CFh ISD1FIFOW ISD1 FIFO Watermark 0004h R/W D0h-D1h ISD2FIFOS ISD2 FIFO Size 0077h RO D2h-D3h ISD2FMT ISD2 Format 0000h R/W D8h-DBh ISD2BDPL ISD2 Buffer Descriptor List PointerLower Base Address 00000000h R/W, RO DCh-DFh ISD2BDPU ISD2 Buffer Description List PointerUpper Base Address 00000000h R/W E0h-E2h ISD3CTL 040000h R/W, RO Input Stream Descriptor 3 (ISD3) Control E3h ISD3STS ISD3 Status 00h R/WC, RO E4h-E7h ISD3LPIB ISD3 Link Position in Buffer 00000000h RO E8h-EBh ISD3CBL ISD3 Cyclic Buffer Length 00000000h R/W ECh-EDh ISD3LVI ISD3 Last Valid Index 0000h R/W EEh-EFh ISD3FIFOW ISD3 FIFO Watermark 0004h R/W F0h-F1h ISD3FIFOS ISD3 FIFO Size 0077h RO F2h-F3h ISD3FMT ISD3 Format 0000h R/W F8h-FBh ISD3BDPL ISD3 Buffer Descriptor List PointerLower Base Address 00000000h R/W, RO FCh-FFh ISD3BDPU ISD3 Buffer Description List PointerUpper Base Address 00000000h R/W 100h-102h OSD0CTL Output Stream Descriptor 0 (OSD0) Control 040000h R/W, RO 103h OSD0STS OSD0 Status 00h R/WC, RO 104h-107h OSD0LPIB OSD0 Link Position in Buffer 00000000h RO 108h-10Bh OSD0CBL OSD0 Cyclic Buffer Length 00000000h R/W 10Ch-10Dh OSD0LVI OSD0 Last Valid Index 0000h R/W 10Eh-10Fh OSD0FIFOW OSD0 FIFO Watermark 0004h R/W 110h-111h OSD0FIFOS OSD0 FIFO Size 00BFh R/W 112-113h OSD0FMT OSD0 Format 0000h R/W 118h-11Bh OSD0BDPL OSD0 Buffer Descriptor List PointerLower Base Address 00000000h R/W, RO 11Ch-11Fh OSD0BDPU OSD0 Buffer Description List PointerUpper Base Address 00000000h R/W Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) Table 17-2. Intel(R) High Definition Audio PCI Register Address Map (Intel(R) High Definition Audio D27:F0) (Sheet 4 of 4) Datasheet HDBAR + Offset Mnemonic 120h-122h OSD1CTL Output Stream Descriptor 1 (OSD1) Control Register Name Default Access 040000h R/W, RO 123h OSD1STS OSD1 Status 00h R/WC, RO 124h-127h OSD1LPIB OSD1 Link Position in Buffer 00000000h RO 128h-12Bh OSD1CBL OSD1 Cyclic Buffer Length 00000000h R/W 12Ch-12Dh OSD1LVI OSD1 Last Valid Index 0000h R/W 12Eh-12Fh OSD1FIFOW OSD1 FIFO Watermark 0004h R/W 130h-131h OSD1FIFOS OSD1 FIFO Size 00BFh R/W 132h-133h OSD1FMT OSD1 Format 0000h R/W 138h-13Bh OSD1BDPL OSD1 Buffer Descriptor List PointerLower Base Address 00000000h R/W, RO 13Ch-13Fh OSD1BDPU OSD1 Buffer Description List PointerUpper Base Address 00000000h R/W 140h-142h OSD2CTL Output Stream Descriptor 2 (OSD2) Control 040000h R/W, RO 143h OSD2STS OSD2 Status 00h R/WC, RO 144h-147h OSD2LPIB OSD2 Link Position in Buffer 00000000h RO 148h-14Bh OSD2CBL OSD2 Cyclic Buffer Length 00000000h R/W 14Ch-14Dh OSD2LVI OSD2 Last Valid Index 0000h R/W 14Eh-14Fh OSD2FIFOW OSD2 FIFO Watermark 0004h R/W 150h-151h OSD2FIFOS OSD2 FIFO Size 00BFh R/W 152h-153h OSD2FMT OSD2 Format 0000h R/W 158h-15Bh OSD2BDPL OSD2 Buffer Descriptor List PointerLower Base Address 00000000h R/W, RO 15Ch-15Fh OSD2BDPU OSD2 Buffer Description List PointerUpper Base Address 00000000h R/W 160h-162h OSD3CTL Output Stream Descriptor 3 (OSD3) Control 040000h R/W, RO 163h OSD3STS OSD3 Status 00h R/WC, RO 164h-167h OSD3LPIB OSD3 Link Position in Buffer 00000000h RO 168h-16Bh OSD3CBL OSD3 Cyclic Buffer Length 00000000h R/W 16Ch-16Dh OSD3LVI OSD3 Last Valid Index 0000h R/W 16Eh-16Fh OSD3FIFOW OSD3 FIFO Watermark 0004h R/W 170h-171h OSD3FIFOS OSD3 FIFO Size 00BFh R/W 172h-173h OSD3FMT OSD3 Format 0000h R/W 178h-17Bh OSD3BDPL OSD3 Buffer Descriptor List PointerLower Base Address 00000000h R/W, RO 17Ch-17Fh OSD3BDPU OSD3 Buffer Description List PointerUpper Base Address 00000000h R/W 731 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.1 GCAP--Global Capabilities Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 00h Default Value: 4401h Description 15:12 Number of Output Stream Supported--RO. Hardwired to 0100b indicating that the PCH's Intel(R) High Definition Audio controller supports 4 output streams. 7:3 Number of Input Stream Supported--RO. Hardwired to 0100b indicating that the PCH's Intel(R) High Definition Audio controller supports 4 input streams. Number of Bidirectional Stream Supported--RO. Hardwired to 0 indicating that the PCH's Intel(R) High Definition Audio controller supports 0 bidirectional stream. 2 Reserved 1 Number of Serial Data Out Signals--RO. Hardwired to 0 indicating that the PCH's Intel(R) High Definition Audio controller supports 1 serial data output signal. 0 64-bit Address Supported--RO. Hardwired to 1b indicating that the PCH's Intel(R) High Definition Audio controller supports 64-bit addressing for BDL addresses, data buffer addressees, and command buffer addresses. VMIN--Minor Version Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 02h Default Value: 00h Bit 7:0 17.2.3 Attribute: Size: RO 8 bits Description Minor Version--RO. Hardwired to 0 indicating that the PCH supports minor revision number 00h of the Intel(R) High Definition Audio specification. VMAJ--Major Version Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 03h Default Value: 01h 732 RO 16 bits Bit 11:8 17.2.2 Attribute: Size: Attribute: Size: RO 8 bits Bit Description 7:0 Major Version--RO. Hardwired to 01h indicating that the PCH supports major revision number 1 of the Intel(R) High Definition Audio specification. Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.4 OUTPAY--Output Payload Capability Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 04h Default Value: 003Ch Bit 15:7 Attribute: Size: RO 16 bits Description Reserved Output Payload Capability--RO. Hardwired to 3Ch indicating 60 word payload. 6:0 This field indicates the total output payload available on the link. This does not include bandwidth used for command and control. This measurement is in 16-bit word quantities per 48 MHz frame. The default link clock of 24.000 MHz (the data is double pumped) provides 1000 bits per frame, or 62.5 words in total. 40 bits are used for command and control, leaving 60 words available for data payload. 00h = 0 word 01h = 1 word payload. ..... FFh = 256 word payload. 17.2.5 INPAY--Input Payload Capability Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 06h Default Value: 001Dh Bit 15:7 Attribute: Size: RO 16 bits Description Reserved Input Payload Capability--RO. Hardwired to 1Dh indicating 29 word payload. 6:0 This field indicates the total output payload available on the link. This does not include bandwidth used for response. This measurement is in 16-bit word quantities per 48 MHz frame. The default link clock of 24.000 MHz provides 500 bits per frame, or 31.25 words in total. 36 bits are used for response, leaving 29 words available for data payload. 00h = 0 word 01h = 1 word payload. ..... FFh = 256 word payload. Datasheet 733 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.6 GCTL--Global Control Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 08h Default Value: 00000000h Bit 31:9 Attribute: Size: R/W 32 bits Description Reserved Accept Unsolicited Response Enable--R/W. 8 7:2 1 0 = Unsolicited responses from the codecs are not accepted. 1 = Unsolicited response from the codecs are accepted by the controller and placed into the Response Input Ring Buffer. Reserved Flush Control--R/W. Writing a 1 to this bit initiates a flush. When the flush completion is received by the controller, hardware sets the Flush Status bit and clears this Flush Control bit. Before a flush cycle is initiated, the DMA Position Buffer must be programmed with a valid memory address by software, but the DMA Position Buffer bit 0 needs not be set to enable the position reporting mechanism. Also, all streams must be stopped (the associated RUN bit must be 0). When the flush is initiated, the controller will flush the pipelines to memory to ensure that the hardware is ready to transition to a D3 state. Setting this bit is not a critical step in the power state transition if the content of the FIFOs is not critical. Controller Reset #--R/W. 0 734 0 = Writing a 0 causes the Intel(R) High Definition Audio controller to be reset. All state machines, FIFOs, and non-resume well memory mapped configuration registers (not PCI configuration registers) in the controller will be reset. The Intel(R) High Definition Audio link RESET# signal will be asserted, and all other link signals will be driven to their default values. After the hardware has completed sequencing into the reset state, it will report a 0 in this bit. Software must read a 0 from this bit to verify the controller is in reset. 1 = Writing a 1 causes the controller to exit its reset state and de-assert the Intel(R) High Definition Audio link RESET# signal. Software is responsible for setting/ clearing this bit such that the minimum Intel(R) High Definition Audio link RESET# signal assertion pulse width specification is met. When the controller hardware is ready to begin operation, it will report a 1 in this bit. Software must read a 1 from this bit before accessing any controller registers. This bit defaults to a 0 after Hardware reset, therefore, software needs to write a 1 to this bit to begin operation. NOTES: 1. The CORB/RIRB RUN bits and all stream RUN bits must be verified cleared to 0 before writing a 0 to this bit to assure a clean re-start. 2. When setting or clearing this bit, software must ensure that minimum link timing requirements (minimum RESET# assertion time, etc.) are met. 3. When this bit is 0 indicating that the controller is in reset, writes to all Intel High Definition Audio memory mapped registers are ignored as if the device is not present. The only exception is this register itself. The Global Control register is write-able as a DWord, Word, or Byte even when CRST# (this bit) is 0 if the byte enable for the byte containing the CRST# bit (Byte Enable 0) is active. If Byte Enable 0 is not active, writes to the Global Control register will be ignored when CRST# is 0. When CRST# is 0, reads to Intel High Definition Audio memory mapped registers will return their default value except for registers that are not reset with PLTRST# or on a D3HOT to D0 transition. Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.7 WAKEEN--Wake Enable Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address: Default Value: Function Level Reset: HDBAR + 0Ch 0000h No Bit 15:4 Attribute: Size: R/W 16 bits Description Reserved SDIN Wake Enable Flags--R/W. These bits control which SDI signal(s) may generate a wake event. A 1b in the bit mask indicates that the associated SDIN signal is enabled to generate a wake. Bit 0 is used for SDI[0] Bit 1 is used for SDI[1] 3:0 Bit 2 is used for SDI[2] Bit 3 is used for SDI[3] NOTE: These bits are in the resume well and only cleared on a power on reset. Software must not make assumptions about the reset state of these bits and must set them appropriately. 17.2.8 STATESTS--State Change Status Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address: Default Value: Function Level Reset: Bit 15:4 HDBAR + 0Eh 0000h No Attribute: Size: R/WC 16 bits Description Reserved SDIN State Change Status Flags--R/WC. Flag bits that indicate which SDI signal(s) received a state change event. The bits are cleared by writing 1s to them. Bit 0 = SDI[0] Bit 1 = SDI[1] 3:0 Bit 2 = SDI[2] Bit 3 = SDI[3] These bits are in the resume well and only cleared on a power on reset. Software must not make assumptions about the reset state of these bits and must set them appropriately. Datasheet 735 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.9 GSTS--Global Status Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 10h Default Value: 0000h Bit R/WC 16 bits Description 15:2 17.2.10 Attribute: Size: Reserved 1 Flush Status--R/WC. This bit is set to 1 by hardware to indicate that the flush cycle initiated when the Flush Control bit (HDBAR + 08h, bit 1) was set has completed. Software must write a 1 to clear this bit before the next time the Flush Control bit is set to clear the bit. 0 Reserved OUTSTRMPAY--Output Stream Payload Capability Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 18h Default Value: 0030h Bit 15:8 7:0 Attribute: Size: RO 16 bits Description Reserved Output Stream Payload Capability (OUTSTRMPAY)--RO: Indicates maximum number of words per frame for any single output stream. This measurement is in 16 bit word quantities per 48 kHz frame. 48 Words (96B) is the maximum supported, therefore a value of 30h is reported in this register. Software must ensure that a format which would cause more words per frame than indicated is not programmed into the Output Stream Descriptor register. 00h = 0 words 01h = 1 word payload ... FFh = 255h word payload 736 Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.11 INSTRMPAY--Input Stream Payload Capability Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 1Ah Default Value: 0018h Bit 15:8 7:0 Attribute: Size: RO 16 bits Description Reserved Input Stream Payload Capability (INSTRMPAY)--RO. Indicates maximum number of words per frame for any single input stream. This measurement is in 16 bit word quantities per 48 kHz frame. 24 Words (48B) is the maximum supported, therefore a value of 18h is reported in this register. Software must ensure that a format which would cause more words per frame than indicated is not programmed into the Input Stream Descriptor register. 00h = 0 words 01h = 1 word payload ... FFh = 255h word payload 17.2.12 INTCTL--Interrupt Control Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 20h Default Value: 00000000h Bit R/W 32 bits Description 31 Global Interrupt Enable (GIE)--R/W. Global bit to enable device interrupt generation. 1 = When set to 1, the Intel High Definition Audio function is enabled to generate an interrupt. This control is in addition to any bits in the bus specific address space, such as the Interrupt Enable bit in the PCI configuration space. NOTE: This bit is not affected by the D3HOT to D0 transition. 30 Controller Interrupt Enable (CIE)--R/W. Enables the general interrupt for controller functions. 1 = When set to 1, the controller generates an interrupt when the corresponding status bit gets set due to a Response Interrupt, a Response Buffer Overrun, and State Change events. NOTE: This bit is not affected by the D3HOT to D0 transition. 29:8 Datasheet Attribute: Size: Reserved 737 Intel(R) High Definition Audio Controller Registers (D27:F0) Bit Description Stream Interrupt Enable (SIE)--R/W. When set to 1, the individual streams are enabled to generate an interrupt when the corresponding status bits get set. A stream interrupt will be caused as a result of a buffer with IOC = 1in the BDL entry being completed, or as a result of a FIFO error (underrun or overrun) occurring. Control over the generation of each of these sources is in the associated Stream Descriptor. 7:0 17.2.13 The streams are numbered and the SIE bits assigned sequentially, based on their order in the register set. Bit Bit Bit Bit Bit Bit Bit Bit 0 1 2 3 4 5 6 7 = = = = = = = = input stream 1 input stream 2 input stream 3 input stream 4 output stream 1 output stream 2 output stream 3 output stream 4 INTSTS--Interrupt Status Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 24h Default Value: 00000000h Attribute: Size: RO 32 bits Bit Description 31 Global Interrupt Status (GIS)--RO. This bit is an OR of all the interrupt status bits in this register. NOTE: This bit is not affected by the D3HOT to D0 transition. 30 Controller Interrupt Status (CIS)--RO. Status of general controller interrupt. 1 = Interrupt condition occurred due to a Response Interrupt, a Response Buffer Overrun Interrupt, or a SDIN State Change event. The exact cause can be determined by interrogating other registers. This bit is an OR of all of the stated interrupt status bits for this register. NOTES: 1. This bit is set regardless of the state of the corresponding interrupt enable bit, but a hardware interrupt will not be generated unless the corresponding enable bit is set. 2. This bit is not affected by the D3HOT to D0 transition. 29:8 Reserved Stream Interrupt Status (SIS)--RO. 1 = Interrupt condition occurred on the corresponding stream. This bit is an OR of all of the stream's interrupt status bits. NOTE: These bits are set regardless of the state of the corresponding interrupt enable bits. 7:0 738 The streams are numbered and the SIE bits assigned sequentially, based on their order in the register set. Bit Bit Bit Bit Bit Bit Bit Bit 0 1 2 3 4 5 6 7 = = = = = = = = input stream 1 input stream 2 input stream 3 input stream 4 output stream 1 output stream 2 output stream 3 output stream 4 Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.14 WALCLK--Wall Clock Counter Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 30h Default Value: 00000000h Bit 31:0 Attribute: Size: RO 32 bits Description Wall Clock Counter--RO. A 32-bit counter that is incremented on each link Bit Clock period and rolls over from FFFF FFFFh to 0000 0000h. This counter will roll over to 0 with a period of approximately 179 seconds. This counter is enabled while the Bit Clock bit is set to 1. Software uses this counter to synchronize between multiple controllers. Will be reset on controller reset. 17.2.15 SSYNC--Stream Synchronization Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 38h Default Value: 00000000h Bit 31:8 Attribute: Size: R/W 32 bits Description Reserved Stream Synchronization (SSYNC)--R/W. When set to 1, these bits block data from being sent on or received from the link. Each bit controls the associated stream descriptor (that is, bit 0 corresponds to the first stream descriptor, etc.) To synchronously start a set of DMA engines, these bits are first set to 1. The RUN bits for the associated stream descriptors are then set to 1 to start the DMA engines. When all streams are ready (FIFORDY =1), the associated SSYNC bits can all be set to 0 at the same time, and transmission or reception of bits to or from the link will begin together at the start of the next full link frame. To synchronously stop the streams, fist these bits are set, and then the individual RUN bits in the stream descriptor are cleared by software. 7:0 If synchronization is not desired, these bits may be left as 0, and the stream will simply begin running normally when the stream's RUN bit is set. The streams are numbered and the SIE bits assigned sequentially, based on their order in the register set. Bit 0 = input stream 1 Bit 1 = input stream 2 Bit 2 = input stream 3 Bit 3 = input stream 4 Bit 4 = output stream 1 Bit 5 = output stream 2 Bit 6 = output stream 3 Bit 7 = output stream 4 Datasheet 739 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.16 CORBLBASE--CORB Lower Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 40h Default Value: 00000000h 17.2.17 Description 31:7 CORB Lower Base Address--R/W. Lower address of the Command Output Ring Buffer, allowing the CORB base address to be assigned on any 128-B boundary. This register field must not be written when the DMA engine is running or the DMA transfer may be corrupted. 6:0 CORB Lower Base Unimplemented Bits--RO. Hardwired to 0. This required the CORB to be allocated with 128B granularity to allow for cache line fetch optimizations. CORBUBASE--CORB Upper Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) Bit 31:0 Attribute: Size: R/W 32 bits Description CORB Upper Base Address--R/W. Upper 32 bits of the address of the Command Output Ring buffer. This register field must not be written when the DMA engine is running or the DMA transfer may be corrupted. CORBWP--CORB Write Pointer Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 48h Default Value: 0000h Bit 15:8 7:0 740 R/W, RO 32 bits Bit Memory Address:HDBAR + 44h Default Value: 00000000h 17.2.18 Attribute: Size: Attribute: Size: R/W 16 bits Description Reserved CORB Write Pointer--R/W. Software writes the last valid CORB entry offset into this field in DWord granularity. The DMA engine fetches commands from the CORB until the Read pointer matches the Write pointer. Supports 256 CORB entries (256x4B = 1KB). This register field may be written when the DMA engine is running. Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.19 CORBRP--CORB Read Pointer Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 4Ah Default Value: 0000h R/W, RO 16 bits Bit Description 15 CORB Read Pointer Reset--R/W. Software writes a 1 to this bit to reset the CORB Read Pointer to 0 and clear any residual prefetched commands in the CORB hardware buffer within the Intel High Definition Audio controller. The hardware will physically update this bit to 1 when the CORB Pointer reset is complete. Software must read a 1 to verify that the reset completed correctly. Software must clear this bit back to 0 and read back the 0 to verify that the clear completed correctly. The CORB DMA engine must be stopped prior to resetting the Read Pointer or else DMA transfer may be corrupted. 14:8 7:0 17.2.20 Attribute: Size: Reserved CORB Read Pointer (CORBRP)--RO. Software reads this field to determine how many commands it can write to the CORB without over-running. The value read indicates the CORB Read Pointer offset in DWord granularity. The offset entry read from this field has been successfully fetched by the DMA controller and may be over-written by software. Supports 256 CORB entries (256 x 4B=1KB). This field may be read while the DMA engine is running. CORBCTL--CORB Control Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 4Ch Default Value: 00h Bit 7:2 Attribute: Size: R/W 8 bits Description Reserved Enable CORB DMA Engine--R/W. 0 = DMA stop 1 1 = DMA run After software writes a 0 to this bit, the hardware may not stop immediately. The hardware will physically update the bit to 0 when the DMA engine is truly stopped. Software must read a 0 from this bit to verify that the DMA engine is truly stopped. CORB Memory Error Interrupt Enable--R/W. 0 Datasheet If this bit is set, the controller will generate an interrupt if the CMEI status bit (HDBAR + 4Dh: bit 0) is set. 741 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.21 CORBST--CORB Status Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 4Dh Default Value: 00h Bit 7:1 0 Attribute: Size: R/WC 8 bits Description Reserved CORB Memory Error Indication (CMEI)--R/WC. 1 = Controller detected an error in the path way between the controller and memory. This may be an ECC bit error or any other type of detectable data error which renders the command data fetched invalid. Software can clear this bit by writing a 1 to it. However, this type of error leaves the audio subsystem in an un-viable state and typically requires a controller reset by writing a 0 to the Controller Reset # bit (HDBAR + 08h: bit 0). 17.2.22 CORBSIZE--CORB Size Register Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 4Eh Default Value: 42h 17.2.23 RO 8 bits Bit Description 7:4 CORB Size Capability--RO. Hardwired to 0100b indicating that the PCH only supports a CORB size of 256 CORB entries (1024B) 3:2 Reserved 1:0 CORB Size--RO. Hardwired to 10b which sets the CORB size to 256 entries (1024B) RIRBLBASE--RIRB Lower Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 50h Default Value: 00000000h 742 Attribute: Size: Attribute: Size: R/W, RO 32 bits Bit Description 31:7 RIRB Lower Base Address--R/W. Lower address of the Response Input Ring Buffer, allowing the RIRB base address to be assigned on any 128-B boundary. This register field must not be written when the DMA engine is running or the DMA transfer may be corrupted. 6:0 RIRB Lower Base Unimplemented Bits--RO. Hardwired to 0. This required the RIRB to be allocated with 128-B granularity to allow for cache line fetch optimizations. Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.24 RIRBUBASE--RIRB Upper Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 54h Default Value: 00000000h 17.2.25 Attribute: Size: R/W 32 bits Bit Description 31:0 RIRB Upper Base Address--R/W. Upper 32 bits of the address of the Response Input Ring Buffer. This register field must not be written when the DMA engine is running or the DMA transfer may be corrupted. RIRBWP--RIRB Write Pointer Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 58h Default Value: 0000h Bit 15 Attribute: Size: R/W, RO 16 bits Description RIRB Write Pointer Reset--R/W. Software writes a 1 to this bit to reset the RIRB Write Pointer to 0. The RIRB DMA engine must be stopped prior to resetting the Write Pointer or else DMA transfer may be corrupted. This bit is always read as 0. 14:8 7:0 Datasheet Reserved RIRB Write Pointer (RIRBWP)--RO. Indicates the last valid RIRB entry written by the DMA controller. Software reads this field to determine how many responses it can read from the RIRB. The value read indicates the RIRB Write Pointer offset in 2 DWord RIRB entry units (since each RIRB entry is 2 DWords long). Supports up to 256 RIRB entries (256 x 8 B = 2 KB). This register field may be written when the DMA engine is running. 743 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.26 RINTCNT--Response Interrupt Count Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 5Ah Default Value: 0000h Bit 15:8 Attribute: Size: R/W 16 bits Description Reserved N Response Interrupt Count--R/W. 0000 0001b = 1 response sent to RIRB ........... 1111 1111b = 255 responses sent to RIRB 0000 0000b = 256 responses sent to RIRB 7:0 The DMA engine should be stopped when changing this field or else an interrupt may be lost. Note that each response occupies 2 DWords in the RIRB. This is compared to the total number of responses that have been returned, as opposed to the number of frames in which there were responses. If more than one codecs responds in one frame, then the count is increased by the number of responses received in the frame. 17.2.27 RIRBCTL--RIRB Control Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 5Ch Default Value: 00h Bit 7:3 2 Attribute: Size: R/W 8 bits Description Reserved Response Overrun Interrupt Control--R/W. If this bit is set, the hardware will generate an interrupt when the Response Overrun Interrupt Status bit (HDBAR + 5Dh: bit 2) is set. Enable RIRB DMA Engine--R/W. 1 0 = DMA stop 1 = DMA run After software writes a 0 to this bit, the hardware may not stop immediately. The hardware will physically update the bit to 0 when the DMA engine is truly stopped. Software must read a 0 from this bit to verify that the DMA engine is truly stopped. Response Interrupt Control--R/W. 0 744 0 = Disable Interrupt 1 = Generate an interrupt after N number of responses are sent to the RIRB buffer OR when an empty Response slot is encountered on all SDI[x] inputs (whichever occurs first). The N counter is reset when the interrupt is generated. Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.28 RIRBSTS--RIRB Status Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 5Dh Default Value: 00h Bit 7:3 2 Attribute: Size: R/WC 8 bits Description Reserved Response Overrun Interrupt Status--R/WC. 1 = Software sets this bit to 1 when the RIRB DMA engine is not able to write the incoming responses to memory before additional incoming responses overrun the internal FIFO. When the overrun occurs, the hardware will drop the responses which overrun the buffer. An interrupt may be generated if the Response Overrun Interrupt Control bit is set. Note that this status bit is set even if an interrupt is not enabled for this event. Software clears this bit by writing a 1 to it. 1 0 Reserved Response Interrupt--R/WC. 1 = Hardware sets this bit to 1 when an interrupt has been generated after N number of Responses are sent to the RIRB buffer OR when an empty Response slot is encountered on all SDI[x] inputs (whichever occurs first). Note that this status bit is set even if an interrupt is not enabled for this event. Software clears this bit by writing a 1 to it. 17.2.29 RIRBSIZE--RIRB Size Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 5Eh Default Value: 42h 17.2.30 RO 8 bits Bit Description 7:4 RIRB Size Capability--RO. Hardwired to 0100b indicating that the PCH only supports a RIRB size of 256 RIRB entries (2048B) 3:2 Reserved 1:0 RIRB Size--RO. Hardwired to 10b which sets the CORB size to 256 entries (2048B) IC--Immediate Command Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 60h Default Value: 00000000h Datasheet Attribute: Size: Attribute: Size: R/W 32 bits Bit Description 31:0 Immediate Command Write--R/W. The command to be sent to the codec using the Immediate Command mechanism is written to this register. The command stored in this register is sent out over the link during the next available frame after a 1 is written to the ICB bit (HDBAR + 68h: bit 0) 745 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.31 IR--Immediate Response Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 64h Default Value: 00000000h Bit 31:0 17.2.32 Attribute: Size: RO 32 bits Description Immediate Response Read (IRR)--RO. This register contains the response received from a codec resulting from a command sent using the Immediate Command mechanism. If multiple codecs responded in the same time, there is no assurance as to which response will be latched. Therefore, broadcast-type commands must not be issued using the Immediate Command mechanism. ICS--Immediate Command Status Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 68h Default Value: 0000h Bit 15:2 1 Attribute: Size: R/W, R/WC 16 bits Description Reserved Immediate Result Valid (IRV)--R/WC. 1 = Set to 1 by hardware when a new response is latched into the Immediate Response register (HDBAR + 64). This is a status flag indicating that software may read the response from the Immediate Response register. Software must clear this bit by writing a 1 to it before issuing a new command so that the software may determine when a new response has arrived. 0 Immediate Command Busy (ICB)--R/W. When this bit is read as 0, it indicates that a new command may be issued using the Immediate Command mechanism. When this bit transitions from a 0 to a 1 (using software writing a 1), the controller issues the command currently stored in the Immediate Command register to the codec over the link. When the corresponding response is latched into the Immediate Response register, the controller hardware sets the IRV flag and clears the ICB bit back to 0. NOTE: An Immediate Command must not be issued while the CORB/RIRB mechanism is operating, otherwise the responses conflict. This must be enforced by software. 746 Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.33 DPLBASE--DMA Position Lower Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 70h Default Value: 00000000h Description 31:7 DMA Position Lower Base Address--R/W. Lower 32 bits of the DMA Position Buffer Base Address. This register field must not be written when any DMA engine is running or the DMA transfer may be corrupted. This same address is used by the Flush Control and must be programmed with a valid value before the Flush Control bit (HDBAR+08h:bit 1) is set. 0 DMA Position Lower Base Unimplemented bits--RO. Hardwired to 0 to force the 128byte buffer alignment for cache line write optimizations. DMA Position Buffer Enable--R/W. 1 = Controller will write the DMA positions of each of the DMA engines to the buffer in the main memory periodically (typically once per frame). Software can use this value to know what data in memory is valid data. DPUBASE--DMA Position Upper Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:HDBAR + 74h Default Value: 00000000h Datasheet R/W, RO 32 bits Bit 6:1 17.2.34 Attribute: Size: Attribute: Size: R/W 32 bits Bit Description 31:0 DMA Position Upper Base Address--R/W. Upper 32 bits of the DMA Position Buffer Base Address. This register field must not be written when any DMA engine is running or the DMA transfer may be corrupted. 747 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.35 SDCTL--Stream Descriptor Control Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:Input Stream[0]: HDBAR + 80h Input Stream[1]: HDBAR + A0h Input Stream[2]: HDBAR + C0h Input Stream[3]: HDBAR + E0h Output Stream[0]: HDBAR + 100h Output Stream[1]: HDBAR + 120h Output Stream[2]: HDBAR + 140h Output Stream[3]: HDBAR + 160h Default Value: 040000h Bit Attribute: R/W, RO Size: 24 bits Description Stream Number--R/W. This value reflect the Tag associated with the data being transferred on the link. When data controlled by this descriptor is sent out over the link, it will have its stream number encoded on the SYNC signal. When an input stream is detected on any of the SDI signals that match this value, the data samples are loaded into FIFO associated with this descriptor. 23:20 Note that while a single SDI input may contain data from more than one stream number, two different SDI inputs may not be configured with the same stream number. 0000 = Reserved 0001 = Stream 1 ........ 1110 = Stream 14 1111 = Stream 15 19 Bidirectional Direction Control--RO. This bit is only meaningful for bidirectional streams; therefore, this bit is hardwired to 0. 18 Traffic Priority--RO. Hardwired to 1 indicating that all streams will use VC1 if it is enabled through the PCI Express* registers. 17:16 15:5 Stripe Control--RO. This bit is only meaningful for input streams; therefore, this bit is hardwired to 0. Reserved Descriptor Error Interrupt Enable--R/W. 4 0 = Disable 1 = An interrupt is generated when the Descriptor Error Status bit is set. FIFO Error Interrupt Enable--R/W. 3 This bit controls whether the occurrence of a FIFO error (overrun for input or underrun for output) will cause an interrupt or not. If this bit is not set, bit 3in the Status register will be set, but the interrupt will not occur. Either way, the samples will be dropped. Interrupt on Completion Enable--R/W. 2 748 This bit controls whether or not an interrupt occurs when a buffer completes with the IOC bit set in its descriptor. If this bit is not set, bit 2 in the Status register will be set, but the interrupt will not occur. Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) Bit Description Stream Run (RUN)--R/W. 1 0 = DMA engine associated with this input stream will be disabled. The hardware will report a 0 in this bit when the DMA engine is actually stopped. Software must read a 0 from this bit before modifying related control registers or restarting the DMA engine. 1 = DMA engine associated with this input stream will be enabled to transfer data from the FIFO to the main memory. The SSYNC bit must also be cleared for the DMA engine to run. For output streams, the cadence generator is reset whenever the RUN bit is set. Stream Reset (SRST)--R/W. 0 Datasheet 0 = Writing a 0 causes the corresponding stream to exit reset. When the stream hardware is ready to begin operation, it will report a 0 in this bit. Software must read a 0 from this bit before accessing any of the stream registers. 1 = Writing a 1 causes the corresponding stream to be reset. The Stream Descriptor registers (except the SRST bit itself) and FIFOs for the corresponding stream are reset. After the stream hardware has completed sequencing into the reset state, it will report a 1 in this bit. Software must read a 1 from this bit to verify that the stream is in reset. The RUN bit must be cleared before SRST is asserted. 749 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.36 SDSTS--Stream Descriptor Status Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:Input Stream[0]: HDBAR + 83h Input Stream[1]: HDBAR + A3h Input Stream[2]: HDBAR + C3h Input Stream[3]: HDBAR + E3h Output Stream[0]: HDBAR + 103h Output Stream[1]: HDBAR + 123h Output Stream[2]: HDBAR + 143h Output Stream[3]: HDBAR + 163h Default Value: 00h Bit 7:6 5 Attribute: R/WC, RO Size: 8 bits Description Reserved FIFO Ready (FIFORDY)--RO. For output streams, the controller hardware will set this bit to 1 while the output DMA FIFO contains enough data to maintain the stream on the link. This bit defaults to 0 on reset because the FIFO is cleared on a reset. For input streams, the controller hardware will set this bit to 1 when a valid descriptor is loaded and the engine is ready for the RUN bit to be set. 4 Descriptor Error--R/WC. 1 = A serious error occurred during the fetch of a descriptor. This could be a result of a Master Abort, a parity or ECC error on the bus, or any other error which renders the current Buffer Descriptor or Buffer Descriptor list useless. This error is treated as a fatal stream error, as the stream cannot continue running. The RUN bit will be cleared and the stream will stopped. Software may attempt to restart the stream engine after addressing the cause of the error and writing a 1 to this bit to clear it. FIFO Error--R/WC. 1 = FIFO error occurred. This bit is set even if an interrupt is not enabled. The bit is cleared by writing a 1 to it. 3 For an input stream, this indicates a FIFO overrun occurring while the RUN bit is set. When this happens, the FIFO pointers do not increment and the incoming data is not written into the FIFO, thereby being lost. For an output stream, this indicates a FIFO underrun when there are still buffers to send. The hardware should not transmit anything on the link for the associated stream if there is not valid data to send. Buffer Completion Interrupt Status--R/WC. 2 1:0 750 This bit is set to 1 by the hardware after the last sample of a buffer has been processed, AND if the Interrupt on Completion bit is set in the command byte of the buffer descriptor. It remains active until software clears it by writing a 1 to it. Reserved Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.37 SDLPIB--Stream Descriptor Link Position in Buffer Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:Input Stream[0]: HDBAR + 84h Input Stream[1]: HDBAR + A4h Input Stream[2]: HDBAR + C4h Input Stream[3]: HDBAR + E4h Output Stream[0]: HDBAR + 104h Output Stream[1]: HDBAR + 124h Output Stream[2]: HDBAR + 144h Output Stream[3]: HDBAR + 164h Attribute: RO Default Value: Size: 32 bits 00000000h Bit 31:0 17.2.38 Description Link Position in Buffer--RO. Indicates the number of bytes that have been received off the link. This register will count from 0 to the value in the Cyclic Buffer Length register and then wrap to 0. SDCBL--Stream Descriptor Cyclic Buffer Length Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:Input Stream[0]: HDBAR + 88h Input Stream[1]: HDBAR + A8h Input Stream[2]: HDBAR + C8h Input Stream[3]: HDBAR + E8h Output Stream[0]: HDBAR + 108h Output Stream[1]: HDBAR + 128h Output Stream[2]: HDBAR + 148h Output Stream[3]: HDBAR + 168h Attribute: R/W Default Value: Size: 32 bits Bit 00000000h Description Cyclic Buffer Length--R/W. Indicates the number of bytes in the complete cyclic buffer. This register represents an integer number of samples. Link Position in Buffer will be reset when it reaches this value. 31:0 Datasheet Software may only write to this register after Global Reset, Controller Reset, or Stream Reset has occurred. This value should be only modified when the RUN bit is 0. Once the RUN bit has been set to enable the engine, software must not write to this register until after the next reset is asserted, or transfer may be corrupted. 751 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.39 SDLVI--Stream Descriptor Last Valid Index Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:Input Stream[0]: HDBAR + 8Ch Input Stream[1]: HDBAR + ACh Input Stream[2]: HDBAR + CCh Input Stream[3]: HDBAR + ECh Output Stream[0]: HDBAR + 10Ch Output Stream[1]: HDBAR + 12Ch Output Stream[2]: HDBAR + 14Ch Output Stream[3]: HDBAR + 16Ch Attribute: R/W Default Value: Size: 16 bits 0000h Bit 15:8 7:0 Description Reserved Last Valid Index--R/W. The value written to this register indicates the index for the last valid Buffer Descriptor in BDL. After the controller has processed this descriptor, it will wrap back to the first descriptor in the list and continue processing. This field must be at least 1; that is, there must be at least 2 valid entries in the buffer descriptor list before DMA operations can begin. This value should only modified when the RUN bit is 0. 17.2.40 SDFIFOW--Stream Descriptor FIFO Watermark Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:Input Stream[0]: HDBAR + 8Eh Input Stream[1]: HDBAR + AEh Input Stream[2]: HDBAR + CEh Input Stream[3]: HDBAR + EEh Output Stream[0]: HDBAR + 10Eh Output Stream[1]: HDBAR + 12Eh Output Stream[2]: HDBAR + 14Eh Output Stream[3]: HDBAR + 16Eh Default Value: 0004h Bit 15:3 Attribute: Size: R/W 16 bits Description Reserved FIFO Watermark (FIFOW)--R/W. Indicates the minimum number of bytes accumulated/free in the FIFO before the controller will start a fetch/eviction of data. 010 = 8B 011 = 16B 100 = 32B (Default) 2:0 101 = 64B Others = Unsupported NOTE: When the bit field is programmed to an unsupported size, the hardware sets itself to the default value. Software must read the bit field to test if the value is supported after setting the bit field. 752 Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.41 SDFIFOS--Stream Descriptor FIFO Size Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:Input Stream[0]: HDBAR + 90h Input Stream[1]: HDBAR + B0h Input Stream[2]: HDBAR + D0h Input Stream[3]: HDBAR + F0h Output Stream[0]: HDBAR + 110h Output Stream[1]: HDBAR + 130h Output Stream[2]: HDBAR + 150h Output Stream[3]: HDBAR + 170h Default Value: Input Stream: 0077h Output Stream: See Description. Bit 15:10 Attribute: Size: Input: RO Output: R/W 16 bits Description Reserved FIFO Size--RO (Input stream), R/W (Output stream). Indicates the maximum number of bytes that could be fetched by the controller at one time. This is the maximum number of bytes that may have been DMA'd into memory but not yet transmitted on the link, and is also the maximum possible value that the PICB count will increase by at one time. The value in this field is different for input and output streams. It is also dependent on the Bits per Samples setting for the corresponding stream. Following are the values read/written from/to this register for input and output streams, and for non-padded and padded bit formats: Output Stream R/W value: Value 9:0 Output Streams 0Fh = 16B 8, 16, 20, 24, or 32 bit Output Streams 1Fh = 32B 8, 16, 20, 24, or 32 bit Output Streams 3Fh = 64B 8, 16, 20, 24, or 32 bit Output Streams 7Fh = 128B 8, 16, 20, 24, or 32 bit Output Streams BFh = 192B 8, 16, or 32 bit Output Streams (Default) FFh = 256B 20 or 24 bit Output Streams (Default) 17Fh = 384B 8, 16, or 32 bit Output Streams 1FFh = 512B 20 or 24 bit Output Streams NOTES: 1. All other values not listed are not supported. 2. When the output stream is programmed to an unsupported size, the hardware sets itself to the default value (BFh). 3. Software must read the bit field to test if the value is supported after setting the bit field. Input Stream RO value: Value Input Streams 77h = 120B 8, 16, 32 bit Input Streams 9Fh = 160B 20, 24 bit Input Streams NOTE: The default value is different for input and output streams, and reflects the default state of the BITS fields (in Stream Descriptor Format registers) for the corresponding stream. Datasheet 753 Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.42 SDFMT--Stream Descriptor Format Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:Input Stream[0]: HDBAR + 92h Input Stream[1]: HDBAR + B2h Input Stream[2]: HDBAR + D2h Input Stream[3]: HDBAR + F2h Output Stream[0]: HDBAR + 112h Output Stream[1]: HDBAR + 132h Output Stream[2]: HDBAR + 152h Output Stream[3]: HDBAR + 172h Default Value: 0000h Bit 15 Attribute: Size: R/W 16 bits Description Reserved Sample Base Rate--R/W 14 0 = 48 kHz 1 = 44.1 kHz Sample Base Rate Multiple--R/W 13:11 000 = 48 kHz, 44.1 kHz or less 001 = x2 (96 kHz, 88.2 kHz, 32 kHz) 010 = x3 (144 kHz) 011 = x4 (192 kHz, 176.4 kHz) Others = Reserved. Sample Base Rate Devisor--R/W. 10:8 7 000 001 010 011 100 101 110 111 = = = = = = = = Divide Divide Divide Divide Divide Divide Divide Divide by by by by by by by by 1(48 kHz, 44.1 kHz) 2 (24 kHz, 22.05 kHz) 3 (16 kHz, 32 kHz) 4 (11.025 kHz) 5 (9.6 kHz) 6 (8 kHz) 7 8 (6 kHz) Reserved Bits per Sample (BITS)--R/W. 000 = 8 bits. The data will be packed in memory in 8-bit containers on 16-bit boundaries 001 = 16 bits. The data will be packed in memory in 16-bit containers on 16-bit boundaries 6:4 010 = 20 bits. The data will be packed in memory in 32-bit containers on 32-bit boundaries 011 = 24 bits. The data will be packed in memory in 32-bit containers on 32-bit boundaries 100 = 32 bits. The data will be packed in memory in 32-bit containers on 32-bit boundaries Others = Reserved. Number of Channels (CHAN)--R/W. Indicates number of channels in each frame of the stream. 3:0 754 0000 =1 0001 =2 ........ 1111 =16 Datasheet Intel(R) High Definition Audio Controller Registers (D27:F0) 17.2.43 SDBDPL--Stream Descriptor Buffer Descriptor List Pointer Lower Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:Input Stream[0]: HDBAR + 98h Input Stream[1]: HDBAR + B8h Input Stream[2]: HDBAR + D8h Input Stream[3]: HDBAR + F8h Output Stream[0]: HDBAR + 118h Output Stream[1]: HDBAR + 138h Output Stream[2]: HDBAR + 158h Output Stream[3]: HDBAR + 178h Default Value: 00000000h Size: R/W,RO 32 bits Bit Description 31:7 Buffer Descriptor List Pointer Lower Base Address--R/W. Lower address of the Buffer Descriptor List. This value should only be modified when the RUN bit is 0, or DMA transfer may be corrupted. 6:0 17.2.44 Attribute: Hardwired to 0 forcing alignment on 128-B boundaries. SDBDPU--Stream Descriptor Buffer Descriptor List Pointer Upper Base Address Register (Intel(R) High Definition Audio Controller--D27:F0) Memory Address:Input Stream[0]: HDBAR + 9Ch Input Stream[1]: HDBAR + BCh Input Stream[2]: HDBAR + DCh Input Stream[3]: HDBAR + FCh Output Stream[0]: HDBAR + 11Ch Output Stream[1]: HDBAR + 13Ch Output Stream[2]: HDBAR + 15Ch Output Stream[3]: HDBAR + 17Ch Attribute: R/W Default Value: Size: 32 bits 00000000h Bit Description 31:0 Buffer Descriptor List Pointer Upper Base Address--R/W. Upper 32-bit address of the Buffer Descriptor List. This value should only be modified when the RUN bit is 0, or DMA transfer may be corrupted. Datasheet 755 Intel(R) High Definition Audio Controller Registers (D27:F0) 756 Datasheet SMBus Controller Registers (D31:F3) 18 SMBus Controller Registers (D31:F3) 18.1 PCI Configuration Registers (SMBus--D31:F3) Table 18-1. SMBus Controller PCI Register Address Map (SMBus--D31:F3) Offset Mnemonic 00h-01h VID Register Name Default Type Vendor Identification 8086 RO Device Identification See register description RO 02h-03h DID 04h-05h PCICMD PCI Command 0000h R/W, RO 06h-07h PCISTS PCI Status 0280h RO 08h RID Revision Identification See register description RO 09h PI Programming Interface 00h RO 0Ah SCC Sub Class Code 05h RO 0Bh BCC Base Class Code 0Ch RO 10h SMBMBAR0 Memory Base Address Register 0 (Bit 31:0) 00000004h R/W 14h SMBMBAR1 Memory Based Address Register 1 (Bit 63:32) 00000000h R/W 20h-23h SMB_BASE SMBus Base Address 00000001h R/W, RO 2Ch-2Dh SVID Subsystem Vendor Identification 0000h RO Subsystem Identification 2Eh-2Fh SID 0000h R/WO 3Ch INT_LN Interrupt Line 00h R/W 3Dh INT_PN Interrupt Pin See register description RO 40h HOSTC Host Configuration 00h R/W NOTE: Registers that are not shown should be treated as Reserved (See Section 9.2 for details). 18.1.1 VID--Vendor Identification Register (SMBus--D31:F3) Address: Default Value: Bit 15:0 Datasheet 00h-01h 8086h Attribute: Size: RO 16 bits Description Vendor ID--RO. This is a 16-bit value assigned to Intel 757 SMBus Controller Registers (D31:F3) 18.1.2 DID--Device Identification Register (SMBus--D31:F3) Address: Default Value: 02h-03h See bit description Bit 15:0 18.1.3 Attribute: Size: RO 16 bits Description Device ID--RO. This is a 16-bit value assigned to the PCH SMBus controller. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register. PCICMD--PCI Command Register (SMBus--D31:F3) Address: Default Value: 04h-05h 0000h Bit 15:11 Attributes: Size: RO, R/W 16 bits Description Reserved Interrupt Disable--R/W. 10 9 0 = Enable 1 = Disables SMBus to assert its PIRQB# signal. Fast Back to Back Enable (FBE)--RO. Hardwired to 0. SERR# Enable (SERR_EN)--R/W. 8 7 0 = Enables SERR# generation. 1 = Disables SERR# generation. Wait Cycle Control (WCC)--RO. Hardwired to 0. Parity Error Response (PER)--R/W. 6 0 = Disable 1 = Sets Detected Parity Error bit (D31:F3:06, bit 15) when a parity error is detected. 5 VGA Palette Snoop (VPS)--RO. Hardwired to 0. 4 Postable Memory Write Enable (PMWE)--RO. Hardwired to 0. 3 Special Cycle Enable (SCE)--RO. Hardwired to 0. 2 Bus Master Enable (BME)--RO. Hardwired to 0. Memory Space Enable (MSE)--R/W. 1 0 = Disables memory mapped config space. 1 = Enables memory mapped config space. I/O Space Enable (IOSE)--R/W. 0 758 0 = Disable 1 = Enables access to the SMBus I/O space registers as defined by the Base Address Register. Datasheet SMBus Controller Registers (D31:F3) 18.1.4 PCISTS--PCI Status Register (SMBus--D31:F3) Address: Default Value: Note: 06h-07h 0280h Attributes: Size: RO 16 bits For the writable bits, software must write a 1 to clear bits that are set. Writing a 0 to the bit has no effect. Bit Description Detected Parity Error (DPE)--R/WC. 15 0 = No parity error detected. 1 = Parity error detected. Signaled System Error (SSE)--R/WC. 14 0 = No system error detected. 1 = System error detected. 13 Received Master Abort (RMA)--RO. Hardwired to 0. 12 Received Target Abort (RTA)--RO. Hardwired to 0. 11 Signaled Target Abort (STA)--RO. Hardwired to 0. 10:9 DEVSEL# Timing Status (DEVT)--RO. This 2-bit field defines the timing for DEVSEL# assertion for positive decode. 01 = Medium timing. 8 Data Parity Error Detected (DPED)--RO. Hardwired to 0. 7 Fast Back to Back Capable (FB2BC)--RO. Hardwired to 1. 6 User Definable Features (UDF)--RO. Hardwired to 0. 5 66 MHz Capable (66MHZ_CAP)--RO. Hardwired to 0. 4 Capabilities List (CAP_LIST)--RO. Hardwired to 0 because there are no capability list structures in this function 3 Interrupt Status (INTS)--RO. This bit indicates that an interrupt is pending. It is independent from the state of the Interrupt Enable bit in the PCI Command register. 2:0 18.1.5 Reserved RID--Revision Identification Register (SMBus--D31:F3) Offset Address: 08h Default Value: See bit description Bit 7:0 Datasheet Attribute: Size: RO 8 bits Description Intel(R) Revision ID--RO. See the 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Revision ID Register. 759 SMBus Controller Registers (D31:F3) 18.1.6 PI--Programming Interface Register (SMBus--D31:F3) Offset Address: 09h Default Value: 00h Bit 7:0 18.1.7 Reserved SCC--Sub Class Code Register (SMBus--D31:F3) Bit 7:0 RO 8 bits Sub Class Code (SCC)--RO. 05h = SMBus serial controller BCC--Base Class Code Register (SMBus--D31:F3) Bit 7:0 Attributes: Size: RO 8 bits Description Base Class Code (BCC)--RO. 0Ch = Serial controller. SMBMBAR0--D31_F3_SMBus Memory Base Address 0 Register (SMBus--D31:F3) Address Offset: 10-13h Default Value: 00000004h Bit 31:8 7:4 3 2:1 0 760 Attributes: Size: Description Address Offset: 0Bh Default Value: 0Ch 18.1.9 RO 8 bits Description Address Offset: 0Ah Default Value: 05h 18.1.8 Attribute: Size: Attributes: Size: R/W, RO 32 bits Description Base Address--R/W. Provides the 32 byte system memory base address for the PCH SMB logic. Reserved Prefetchable (PREF)--RO. Hardwired to 0. Indicates that SMBMBAR is not pre-fetchable. Address Range (ADDRNG)--RO. Indicates that this SMBMBAR can be located anywhere in 64 bit address space. Hardwired to 10b. Memory Space Indicator--RO. This read-only bit always is 0, indicating that the SMB logic is Memory mapped. Datasheet SMBus Controller Registers (D31:F3) 18.1.10 SMBMBAR1--D31_F3_SMBus Memory Base Address 1 Register (SMBus--D31:F3) Address Offset: 14h-17h Default Value: 00000000h Bit 31:0 18.1.11 Base Address--R/W. Provides bits 63-32 system memory base address for the PCH SMB logic. SMB_BASE--SMBus Base Address Register (SMBus--D31:F3) Bit 31:16 15:5 4:1 0 Attribute: Size: R/W, RO 32-bits Description Reserved--RO Base Address--R/W. This field provides the 32-byte system I/O base address for the PCH's SMB logic. Reserved--RO IO Space Indicator--RO. Hardwired to 1 indicating that the SMB logic is I/O mapped. SVID--Subsystem Vendor Identification Register (SMBus--D31:F2/F4) Address Offset: 2Ch-2Dh Default Value: 0000h Lockable: No Datasheet R/W 32 bits Description Address Offset: 20-23h Default Value: 00000001h 18.1.12 Attributes: Size: Attribute: Size: Power Well: RO 16 bits Core Bit Description 15:0 Subsystem Vendor ID (SVID)--RO. The SVID register, in combination with the Subsystem ID (SID) register, enables the operating system (OS) to distinguish subsystems from each other. The value returned by reads to this register is the same as that which was written by BIOS into the IDE SVID register. NOTE: Software can write to this register only once per core well reset. Writes should be done as a single 16-bit cycle. 761 SMBus Controller Registers (D31:F3) 18.1.13 SID--Subsystem Identification Register (SMBus--D31:F2/F4) Address Offset: 2Eh-2Fh Default Value: 0000h Lockable: No 18.1.14 Description 15:0 Subsystem ID (SID)--R/WO. The SID register, in combination with the SVID register, enables the operating system (OS) to distinguish subsystems from each other. The value returned by reads to this register is the same as that which was written by BIOS into the IDE SID register. NOTE: Software can write to this register only once per core well reset. Writes should be done as a single 16-bit cycle. INT_LN--Interrupt Line Register (SMBus--D31:F3) Bit 7:0 Attributes: Size: R/W 8 bits Description Interrupt Line (INT_LN)--R/W. This data is not used by the PCH. It is to communicate to software the interrupt line that the interrupt pin is connected to PIRQB#. INT_PN--Interrupt Pin Register (SMBus--D31:F3) Address Offset: 3Dh Default Value: See description Bit 7:0 762 R/WO 16 bits Core Bit Address Offset: 3Ch Default Value: 00h 18.1.15 Attribute: Size: Power Well: Attributes: Size: RO 8 bits Description Interrupt PIN (INT_PN)--RO. This reflects the value of D31IP.SMIP in chipset configuration space. Datasheet SMBus Controller Registers (D31:F3) 18.1.16 HOSTC--Host Configuration Register (SMBus--D31:F3) Address Offset: 40h Default Value: 00h Bit 7:4 Attribute: Size: R/W 8 bits Description Reserved SSRESET - Soft SMBus Reset--R/W. 3 0 = The HW will reset this bit to 0 when SMBus reset operation is completed. 1 = The SMBus state machine and logic in the PCH is reset. I2C_EN--R/W. 2 0 = SMBus behavior. 1 = The PCH is enabled to communicate with I2C devices. This will change the formatting of some commands. SMB_SMI_EN--R/W. 1 0 = SMBus interrupts will not generate an SMI#. 1 = Any source of an SMB interrupt will instead be routed to generate an SMI#. See Section 5.20.4 (Interrupts / SMI#). This bit needs to be set for SMBALERT# to be enabled. SMBus Host Enable (HST_EN)--R/W. 0 Datasheet 0 = Disable the SMBus Host controller. 1 = Enable. The SMB Host controller interface is enabled to execute commands. The INTREN bit (offset SM_BASE + 02h, bit 0) needs to be enabled for the SMB Host controller to interrupt or SMI#. Note that the SMB Host controller will not respond to any new requests until all interrupt requests have been cleared. 763 SMBus Controller Registers (D31:F3) 18.2 SMBus I/O and Memory Mapped I/O Registers The SMBus registers (see Table 18-2) can be accessed through I/O BAR or Memory BAR registers in PCI configuration space. The offsets are the same for both I/O and Memory Mapped I/O registers. Table 18-2. SMBus I/O and Memory Mapped I/O Register Address Map SMB_BASE + Offset 764 Mnemonic Register Name Default Type 00h HST_STS Host Status 00h R/WC, RO 02h HST_CNT Host Control 00h R/W, WO 03h HST_CMD Host Command 00h R/W 04h XMIT_SLVA Transmit Slave Address 00h R/W 05h HST_D0 Host Data 0 00h R/W 06h HST_D1 Host Data 1 00h R/W 07h HOST_BLOCK_DB Host Block Data Byte 00h R/W 08h PEC Packet Error Check 00h R/W 09h RCV_SLVA Receive Slave Address 0Ah-0Bh SLV_DATA Receive Slave Data 44h R/W 0000h RO 0Ch AUX_STS Auxiliary Status 00h R/WC, RO 0Dh AUX_CTL Auxiliary Control 00h R/W 0Eh SMLINK_PIN_CTL SMLink Pin Control (TCO Compatible Mode) See register description R/W, RO 0Fh SMBus_PIN_CTL SMBus Pin Control See register description R/W, RO 10h SLV_STS Slave Status 00h R/WC 11h SLV_CMD Slave Command 00h R/W 14h NOTIFY_DADDR Notify Device Address 00h RO 16h NOTIFY_DLOW Notify Data Low Byte 00h RO 17h NOTIFY_DHIGH Notify Data High Byte 00h RO Datasheet SMBus Controller Registers (D31:F3) 18.2.1 HST_STS--Host Status Register (SMBus--D31:F3) Register Offset: SM_BASE + 00h Default Value: 00h Attribute: Size: R/WC, RO 8-bits All status bits are set by hardware and cleared by the software writing a one to the particular bit position. Writing a 0 to any bit position has no effect. Bit Description Byte Done Status (DS)--R/WC. 0 = Software can clear this by writing a 1 to it. 1 = Host controller received a byte (for Block Read commands) or if it has completed transmission of a byte (for Block Write commands) when the 32-byte buffer is not being used. Note that this bit will be set, even on the last byte of the transfer. This bit is not set when transmission is due to the LAN interface heartbeat. This bit has no meaning for block transfers when the 32-byte buffer is enabled. 7 NOTE: When the last byte of a block message is received, the host controller will set this bit. However, it will not immediately set the INTR bit (bit 1 in this register). When the interrupt handler clears the DS bit, the message is considered complete, and the host controller will then set the INTR bit (and generate another interrupt). Thus, for a block message of n bytes, the PCH will generate n+1 interrupts. The interrupt handler needs to be implemented to handle these cases. When not using the 32 Byte Buffer, hardware will drive the SMBCLK signal low when the DS bit is set until SW clears the bit. This includes the last byte of a transfer. Software must clear the DS bit before it can clear the BUSY bit. INUSE_STS--R/W. This bit is used as semaphore among various independent software threads that may need to use the PCH's SMBus logic, and has no other effect on hardware. 6 0 = After a full PCI reset, a read to this bit returns a 0. 1 = After the first read, subsequent reads will return a 1. A write of a 1 to this bit will reset the next read value to 0. Writing a 0 to this bit has no effect. Software can poll this bit until it reads a 0, and will then own the usage of the host controller. SMBALERT_STS--R/WC. 5 0 = Interrupt or SMI# was not generated by SMBALERT#. Software clears this bit by writing a 1 to it. 1 = The source of the interrupt or SMI# was the SMBALERT# signal. This bit is only cleared by software writing a 1 to the bit position or by RSMRST# going low. If the signal is programmed as a GPIO, then this bit will never be set. FAILED--R/WC. 4 0 = Software clears this bit by writing a 1 to it. 1 = The source of the interrupt or SMI# was a failed bus transaction. This bit is set in response to the KILL bit being set to terminate the host transaction. BUS_ERR--R/WC. 3 0 = Software clears this bit by writing a 1 to it. 1 = The source of the interrupt of SMI# was a transaction collision. DEV_ERR--R/WC. 2 0 = Software clears this bit by writing a 1 to it. The PCH will then de-assert the interrupt or SMI#. 1 = The source of the interrupt or SMI# was due to one of the following: * Invalid Command Field, * Unclaimed Cycle (host initiated), * Host Device Time-out Error. Datasheet 765 SMBus Controller Registers (D31:F3) Bit 1 Description INTR--R/WC. This bit can only be set by termination of a command. INTR is not dependent on the INTREN bit (offset SM_BASE + 02h, bit 0) of the Host controller register (offset 02h). It is only dependent on the termination of the command. If the INTREN bit is not set, then the INTR bit will be set, although the interrupt will not be generated. Software can poll the INTR bit in this non-interrupt case. 0 = Software clears this bit by writing a 1 to it. The PCH then de-asserts the interrupt or SMI#. 1 = The source of the interrupt or SMI# was the successful completion of its last command. HOST_BUSY--R/WC. 0 18.2.2 0 = Cleared by the PCH when the current transaction is completed. 1 = Indicates that the PCH is running a command from the host interface. No SMB registers should be accessed while this bit is set, except the BLOCK DATA BYTE Register. The BLOCK DATA BYTE Register can be accessed when this bit is set only when the SMB_CMD bits in the Host Control Register are programmed for Block command or I2C Read command. This is necessary to check the DONE_STS bit. HST_CNT--Host Control Register (SMBus--D31:F3) Register Offset: SM_BASE + 02h Default Value: 00h Note: Attribute: Size: R/W, WO 8-bits A read to this register will clear the byte pointer of the 32-byte buffer. Bit Description 7 PEC_EN--R/W. 0 = SMBus host controller does not perform the transaction with the PEC phase appended. 1 = Causes the host controller to perform the SMBus transaction with the Packet Error Checking phase appended. For writes, the value of the PEC byte is transferred from the PEC Register. For reads, the PEC byte is loaded in to the PEC Register. This bit must be written prior to the write in which the START bit is set. START--WO. 6 0 = This bit will always return 0 on reads. The HOST_BUSY bit in the Host Status register (offset 00h) can be used to identify when the PCH has finished the command. 1 = Writing a 1 to this bit initiates the command described in the SMB_CMD field. All registers should be setup prior to writing a 1 to this bit position. LAST_BYTE--WO. This bit is used for Block Read commands. 5 1 = Software sets this bit to indicate that the next byte will be the last byte to be received for the block. This causes the PCH to send a NACK (instead of an ACK) after receiving the last byte. NOTE: Once the SECOND_TO_STS bit in TCO2_STS register (D31:F0, TCOBASE+6h, bit 1) is set, the LAST_BYTE bit also gets set. While the SECOND_TO_STS bit is set, the LAST_BYTE bit cannot be cleared. This prevents the PCH from running some of the SMBus commands (Block Read/Write, I2C Read, Block I2C Write). 766 Datasheet SMBus Controller Registers (D31:F3) Bit Description SMB_CMD--R/W. The bit encoding below indicates which command the PCH is to perform. If enabled, the PCH will generate an interrupt or SMI# when the command has completed If the value is for a non-supported or reserved command, the PCH will set the device error (DEV_ERR) status bit (offset SM_BASE + 00h, bit 2) and generate an interrupt when the START bit is set. The PCH will perform no command, and will not operate until DEV_ERR is cleared. 000 = Quick: The slave address and read/write value (bit 0) are stored in the transmit slave address register. 001 = Byte: This command uses the transmit slave address and command registers. Bit 0 of the slave address register determines if this is a read or write command. 010 = Byte Data: This command uses the transmit slave address, command, and DATA0 registers. Bit 0 of the slave address register determines if this is a read or write command. If it is a read, the DATA0 register will contain the read data. 011 = Word Data: This command uses the transmit slave address, command, DATA0 and DATA1 registers. Bit 0 of the slave address register determines if this is a read or write command. If it is a read, after the command completes, the DATA0 and DATA1 registers will contain the read data. 4:2 100 = Process Call: This command uses the transmit slave address, command, DATA0 and DATA1 registers. Bit 0 of the slave address register determines if this is a read or write command. After the command completes, the DATA0 and DATA1 registers will contain the read data. 101 = Block: This command uses the transmit slave address, command, DATA0 registers, and the Block Data Byte register. For block write, the count is stored in the DATA0 register and indicates how many bytes of data will be transferred. For block reads, the count is received and stored in the DATA0 register. Bit 0 of the slave address register selects if this is a read or write command. For writes, data is retrieved from the first n (where n is equal to the specified count) addresses of the SRAM array. For reads, the data is stored in the Block Data Byte register. 110 = I2C Read: This command uses the transmit slave address, command, DATA0, DATA1 registers, and the Block Data Byte register. The read data is stored in the Block Data Byte register. The PCH continues reading data until the NAK is received. 111 = Block Process: This command uses the transmit slave address, command, DATA0 and the Block Data Byte register. For block write, the count is stored in the DATA0 register and indicates how many bytes of data will be transferred. For block read, the count is received and stored in the DATA0 register. Bit 0 of the slave address register always indicate a write command. For writes, data is retrieved from the first m (where m is equal to the specified count) addresses of the SRAM array. For reads, the data is stored in the Block Data Byte register. NOTE: E32B bit in the Auxiliary Control register must be set for this command to work. KILL--R/W. 1 0 = Normal SMBus host controller functionality. 1 = Kills the current host transaction taking place, sets the FAILED status bit, and asserts the interrupt (or SMI#). This bit, once set, must be cleared by software to allow the SMBus host controller to function normally. INTREN--R/W. 0 Datasheet 0 = Disable. 1 = Enable the generation of an interrupt or SMI# upon the completion of the command. 767 SMBus Controller Registers (D31:F3) 18.2.3 HST_CMD--Host Command Register (SMBus--D31:F3) Register Offset: SM_BASE + 03h Default Value: 00h 18.2.4 Attribute: Size: R/W 8 bits Bit Description 7:0 This 8-bit field is transmitted by the host controller in the command field of the SMBus protocol during the execution of any command. XMIT_SLVA--Transmit Slave Address Register (SMBus--D31:F3) Register Offset: SM_BASE + 04h Default Value: 00h Attribute: Size: R/W 8 bits This register is transmitted by the host controller in the slave address field of the SMBus protocol. Bit 7:1 Description Address--R/W. This field provides a 7-bit address of the targeted slave. RW--R/W. Direction of the host transfer. 0 18.2.5 0 = Write 1 = Read HST_D0--Host Data 0 Register (SMBus--D31:F3) Register Offset: SM_BASE + 05h Default Value: 00h 18.2.6 R/W 8 bits Bit Description 7:0 Data0/Count--R/W. This field contains the 8-bit data sent in the DATA0 field of the SMBus protocol. For block write commands, this register reflects the number of bytes to transfer. This register should be programmed to a value between 1 and 32 for block counts. A count of 0 or a count above 32 will result in unpredictable behavior. The host controller does not check or log invalid block counts. HST_D1--Host Data 1 Register (SMBus--D31:F3) Register Offset: SM_BASE + 06h Default Value: 00h 768 Attribute: Size: Attribute: Size: R/W 8 bits Bit Description 7:0 Data1--R/W. This 8-bit register is transmitted in the DATA1 field of the SMBus protocol during the execution of any command. Datasheet SMBus Controller Registers (D31:F3) 18.2.7 Host_BLOCK_DB--Host Block Data Byte Register (SMBus--D31:F3) Register Offset: SM_BASE + 07h Default Value: 00h Bit Attribute: Size: R/W 8 bits Description Block Data (BDTA)--R/W. This is either a register, or a pointer into a 32-byte block array, depending upon whether the E32B bit is set in the Auxiliary Control register. When the E32B bit (offset SM_BASE + 0Dh, bit 1) is cleared, this is a register containing a byte of data to be sent on a block write or read from on a block read. When the E32B bit is set, reads and writes to this register are used to access the 32byte block data storage array. An internal index pointer is used to address the array, which is reset to 0 by reading the HCTL register (offset 02h). The index pointer then increments automatically upon each access to this register. The transfer of block data into (read) or out of (write) this storage array during an SMBus transaction always starts at index address 0. 7:0 When the E2B bit is set, for writes, software will write up to 32-bytes to this register as part of the setup for the command. After the Host controller has sent the Address, Command, and Byte Count fields, it will send the bytes in the SRAM pointed to by this register. When the E2B bit is cleared for writes, software will place a single byte in this register. After the host controller has sent the address, command, and byte count fields, it will send the byte in this register. If there is more data to send, software will write the next series of bytes to the SRAM pointed to by this register and clear the DONE_STS bit. The controller will then send the next byte. During the time between the last byte being transmitted to the next byte being transmitted, the controller will insert wait-states on the interface. When the E2B bit is set for reads, after receiving the byte count into the Data0 register, the first series of data bytes go into the SRAM pointed to by this register. If the byte count has been exhausted or the 32-byte SRAM has been filled, the controller will generate an SMI# or interrupt (depending on configuration) and set the DONE_STS bit. Software will then read the data. During the time between when the last byte is read from the SRAM to when the DONE_STS bit is cleared, the controller will insert waitstates on the interface. 18.2.8 PEC--Packet Error Check (PEC) Register (SMBus--D31:F3) Register Offset: SM_BASE + 08h Default Value: 00h Datasheet Attribute: Size: R/W 8 bits Bit Description 7:0 PEC_DATA--R/W. This 8-bit register is written with the 8-bit CRC value that is used as the SMBus PEC data prior to a write transaction. For read transactions, the PEC data is loaded from the SMBus into this register and is then read by software. Software must ensure that the INUSE_STS bit is properly maintained to avoid having this field overwritten by a write transaction following a read transaction. 769 SMBus Controller Registers (D31:F3) 18.2.9 RCV_SLVA--Receive Slave Address Register (SMBus--D31:F3) Register Offset: SM_BASE + 09h Default Value: 44h Lockable: No Bit 7 6:0 18.2.10 Attribute: Size: Power Well: R/W 8 bits Resume Description Reserved SLAVE_ADDR--R/W. This field is the slave address that the PCH decodes for read and write cycles. the default is not 0, so the SMBus Slave Interface can respond even before the processor comes up (or if the processor is dead). This register is cleared by RSMRST#, but not by PLTRST#. SLV_DATA--Receive Slave Data Register (SMBus--D31:F3) Register Offset: SM_BASE + 0Ah-0Bh Default Value: 0000h Lockable: No Attribute: Size: Power Well: RO 16 bits Resume This register contains the 16-bit data value written by the external SMBus master. The processor can then read the value from this register. This register is reset by RSMRST#, but not PLTRST# . Bit Description 15:8 Data Message Byte 1 (DATA_MSG1)--RO. See Section 5.20.7 for a discussion of this field. 7:0 18.2.11 Data Message Byte 0 (DATA_MSG0)--RO. See Section 5.20.7 for a discussion of this field. AUX_STS--Auxiliary Status Register (SMBus--D31:F3) Register Offset: SM_BASE + 0Ch Default Value: 00h Lockable: No Attribute: Size: Power Well: R/WC, RO 8 bits Resume . Bit 7:2 1 Description Reserved SMBus TCO Mode (STCO)--RO. This bit reflects the strap setting of TCO compatible mode versus Advanced TCO mode. 0 = The PCH is in the compatible TCO mode. 1 = The PCH is in the advanced TCO mode. CRC Error (CRCE)--R/WC. 0 770 0 = Software clears this bit by writing a 1 to it. 1 = This bit is set if a received message contained a CRC error. When this bit is set, the DERR bit of the host status register will also be set. This bit will be set by the controller if a software abort occurs in the middle of the CRC portion of the cycle or an abort happens after the PCH has received the final data bit transmitted by an external slave. Datasheet SMBus Controller Registers (D31:F3) 18.2.12 AUX_CTL--Auxiliary Control Register (SMBus--D31:F3) Register Offset: SM_BASE + 0Dh Default Value: 00h Lockable: No Attribute: Size: Power Well: R/W 8 bits Resume . Bit 7:2 Description Reserved Enable 32-Byte Buffer (E32B)--R/W. 1 0 = Disable. 1 = Enable. When set, the Host Block Data register is a pointer into a 32-byte buffer, as opposed to a single register. This enables the block commands to transfer or receive up to 32-bytes before the PCH generates an interrupt. Automatically Append CRC (AAC)--R/W. 0 18.2.13 0 = The PCH will Not automatically append the CRC. 1 = The PCH will automatically append the CRC. This bit must not be changed during SMBus transactions or undetermined behavior will result. It should be programmed only once during the lifetime of the function. SMLINK_PIN_CTL--SMLink Pin Control Register (SMBus--D31:F3) Register Offset: SM_BASE + 0Eh Default Value: See below Note: Attribute: Size: R/W, RO 8 bits This register is in the resume well and is reset by RSMRST#. This register is only applicable in the TCO compatible mode. Bit 7:3 Description Reserved SMLINK_CLK_CTL--R/W. 2 1 0 = The PCH will drive the SMLink0 pin low, independent of what the other SMLink logic would otherwise indicate for the SMLink0 pin. 1 = The SMLink0 pin is not overdriven low. The other SMLink logic controls the state of the pin. (Default) SMLINK1_CUR_STS--RO. This read-only bit has a default value that is dependent on an external signal level. This pin returns the value on the SMLink1 pin. This allows software to read the current state of the pin. 0 = Low 1 = High 0 SMLINK0_CUR_STS--RO. This read-only bit has a default value that is dependent on an external signal level. This pin returns the value on the SMLink0 pin. This allows software to read the current state of the pin. 0 = Low 1 = High Datasheet 771 SMBus Controller Registers (D31:F3) 18.2.14 SMBus_PIN_CTL--SMBus Pin Control Register (SMBus--D31:F3) Register Offset: SM_BASE + 0Fh Default Value: See below Note: Attribute: Size: R/W, RO 8 bits This register is in the resume well and is reset by RSMRST#. Bit 7:3 2 Description Reserved SMBCLK_CTL--R/W. 1 = The SMBCLK pin is not overdriven low. The other SMBus logic controls the state of the pin. 0 = The PCH drives the SMBCLK pin low, independent of what the other SMB logic would otherwise indicate for the SMBCLK pin. (Default) 1 SMBDATA_CUR_STS--RO. This read-only bit has a default value that is dependent on an external signal level. This pin returns the value on the SMBDATA pin. This allows software to read the current state of the pin. 0 = Low 1 = High 0 SMBCLK_CUR_STS--RO. This read-only bit has a default value that is dependent on an external signal level. This pin returns the value on the SMBCLK pin. This allows software to read the current state of the pin. 0 = Low 1 = High 18.2.15 SLV_STS--Slave Status Register (SMBus--D31:F3) Register Offset: SM_BASE + 10h Default Value: 00h Note: Attribute: Size: R/WC 8 bits This register is in the resume well and is reset by RSMRST#. All bits in this register are implemented in the 64 kHz clock domain. Therefore, software must poll this register until a write takes effect before assuming that a write has completed internally. Bit 7:1 0 772 Description Reserved HOST_NOTIFY_STS--R/WC. The PCH sets this bit to a 1 when it has completely received a successful Host Notify Command on the SMBus pins. Software reads this bit to determine that the source of the interrupt or SMI# was the reception of the Host Notify Command. Software clears this bit after reading any information needed from the Notify address and data registers by writing a 1 to this bit. Note that the PCH will allow the Notify Address and Data registers to be over-written once this bit has been cleared. When this bit is 1, the PCH will NACK the first byte (host address) of any new "Host Notify" commands on the SMBus pins. Writing a 0 to this bit has no effect. Datasheet SMBus Controller Registers (D31:F3) 18.2.16 SLV_CMD--Slave Command Register (SMBus--D31:F3) Register Offset: SM_BASE + 11h Default Value: 00h Note: Attribute: Size: R/W 8 bits This register is in the resume well and is reset by RSMRST#. Bit 7:2 Description Reserved SMBALERT_DIS--R/W. 2 1 0 = Allows the generation of the interrupt or SMI#. 1 = Software sets this bit to block the generation of the interrupt or SMI# due to the SMBALERT# source. This bit is logically inverted and ANDed with the SMBALERT_STS bit (offset SM_BASE + 00h, bit 5). The resulting signal is distributed to the SMI# and/or interrupt generation logic. This bit does not effect the wake logic. HOST_NOTIFY_WKEN--R/W. Software sets this bit to 1 to enable the reception of a Host Notify command as a wake event. When enabled this event is "OR'd" in with the other SMBus wake events and is reflected in the SMB_WAK_STS bit of the General Purpose Event 0 Status register. 0 = Disable 1 = Enable 0 HOST_NOTIFY_INTREN--R/W. Software sets this bit to 1 to enable the generation of interrupt or SMI# when HOST_NOTIFY_STS (offset SM_BASE + 10h, bit 0) is 1. This enable does not affect the setting of the HOST_NOTIFY_STS bit. When the interrupt is generated, either PIRQB# or SMI# is generated, depending on the value of the SMB_SMI_EN bit (D31:F3:40h, bit 1). If the HOST_NOTIFY_STS bit is set when this bit is written to a 1, then the interrupt (or SMI#) will be generated. The interrupt (or SMI#) is logically generated by AND'ing the STS and INTREN bits. 0 = Disable 1 = Enable 18.2.17 NOTIFY_DADDR--Notify Device Address Register (SMBus--D31:F3) Register Offset: SM_BASE + 14h Default Value: 00h Note: RO 8 bits This register is in the resume well and is reset by RSMRST#. Bit Description 7:1 DEVICE_ADDRESS--RO. This field contains the 7-bit device address received during the Host Notify protocol of the SMBus 2.0 Specification. Software should only consider this field valid when the HOST_NOTIFY_STS bit (D31:F3:SM_BASE +10, bit 0) is set to 1. 0 Datasheet Attribute: Size: Reserved 773 SMBus Controller Registers (D31:F3) 18.2.18 NOTIFY_DLOW--Notify Data Low Byte Register (SMBus--D31:F3) Register Offset: SM_BASE + 16h Default Value: 00h Note: 18.2.19 RO 8 bits This register is in the resume well and is reset by RSMRST#. Bit Description 7:0 DATA_LOW_BYTE--RO. This field contains the first (low) byte of data received during the Host Notify protocol of the SMBus 2.0 specification. Software should only consider this field valid when the HOST_NOTIFY_STS bit (D31:F3:SM_BASE +10, bit 0) is set to 1. NOTIFY_DHIGH--Notify Data High Byte Register (SMBus--D31:F3) Register Offset: SM_BASE + 17h Default Value: 00h Note: Attribute: Size: Attribute: Size: RO 8 bits This register is in the resume well and is reset by RSMRST#. Bit Description 7:0 DATA_HIGH_BYTE--RO. This field contains the second (high) byte of data received during the Host Notify protocol of the SMBus 2.0 specification. Software should only consider this field valid when the HOST_NOTIFY_STS bit (D31:F3:SM_BASE +10, bit 0) is set to 1. 774 Datasheet PCI Express* Configuration Registers 19 PCI Express* Configuration Registers 19.1 PCI Express* Configuration Registers (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Note: Register address locations that are not shown in Table 19-1, should be treated as Reserved. Note: This section assumes the default PCI Express Function Number-to-Root Port mapping is used. Function numbers for a given root port are assignable through the "Root Port Function Number and Hide for PCI Express Root Ports" registers (RCBA+0404h). / Table 19-1. PCI Express* Configuration Registers Address Map (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/) (Sheet 1 of 3) Datasheet Function 0-5 Default Type Vendor Identification 8086h RO Device Identification See register description RO Offset Mnemonic Register Name 00h-01h VID 02h-03h DID 04h-05h PCICMD PCI Command 0000h R/W, RO 06h-07h PCISTS PCI Status 0010h R/WC, RO 08h RID Revision Identification See register description RO Programming Interface 00h RO Sub Class Code 04h RO 09h PI 0Ah SCC 0Bh BCC Base Class Code 06h RO 0Ch CLS Cache Line Size 00h R/W 0Dh PLT Primary Latency Timer 00h RO 0Eh HEADTYP Header Type 81h RO 18h-1Ah BNUM Bus Number 000000h R/W 1Bh SLT 00h RO Secondary Latency Timer 1Ch-1Dh IOBL I/O Base and Limit 0000h R/W, RO 1Eh-1Fh SSTS Secondary Status Register 0000h R/WC 20h-23h MBL Memory Base and Limit 00000000h R/W 24h-27h PMBL Prefetchable Memory Base and Limit 00010001h R/W, RO 28h-2Bh PMBU32 Prefetchable Memory Base Upper 32 Bits 00000000h R/W 2Ch-2Fh PMLU32 Prefetchable Memory Limit Upper 32 Bits 00000000h R/W 34h CAPP 3Ch-3Dh INTR 3Eh-3Fh BCTRL Capabilities List Pointer Interrupt Information Bridge Control Register 40h RO See bit description R/W, RO 0000h R/W 775 PCI Express* Configuration Registers Table 19-1. PCI Express* Configuration Registers Address Map (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/) (Sheet 2 of 3) 776 Register Name Function 0-5 Default Type Offset Mnemonic 40h-41h CLIST Capabilities List 8010 RO 42h-43h XCAP PCI Express* Capabilities 0041 R/WO, RO 44h-47h DCAP Device Capabilities 48h-49h DCTL Device Control 4Ah-4Bh DSTS Device Status 00000FE0h RO 0000h R/W, RO 0010h R/WC, RO See bit description R/W, RO, R/WO 4Ch-4Fh LCAP Link Capabilities 50h-51h LCTL Link Control 0000h R/W, WO, RO 52h-53h LSTS Link Status See bit description RO 54h-57h SLCAP Slot Capabilities Register 00000060h R/WO, RO 58h-59h SLCTL Slot Control 0000h R/W, RO 5Ah-5Bh SLSTS Slot Status 0000h R/WC, RO 5Ch-5Dh RCTL Root Control 0000h R/W 60h-63h RSTS Root Status 00000000h R/WC, RO 64h-67h DCAP2 Device Capabilities 2 Register 00000016h RO 68h-69h DCTL2 Device Control 2 Register 0000h R/W, RO 70h-71h LCTL2 Link Control 2 Register 0001h RO 80h-81h MID Message Signaled Interrupt Identifiers 9005h RO 82h-83h MC Message Signaled Interrupt Message Control 0000h R/W, RO 84h-87h MA Message Signaled Interrupt Message Address 00000000h R/W 88h-89h MD Message Signaled Interrupt Message Data 0000h R/W 90h-91h SVCAP 94h-97h SVID A0h-A1h PMCAP A2h-A3h PMC A4-A7h PMCS D4-D7h MPC2 D8-DBh MPC DC-DFh SMSCS E1h RPDCGEN Subsystem Vendor Capability Subsystem Vendor Identification A00Dh RO 00000000h R/WO Power Management Capability 0001h RO PCI Power Management Capability C802h RO 00000000h R/W, RO PCI Power Management Control and Status Miscellaneous Port Configuration 2 00000000h R/W, RO Miscellaneous Port Configuration 08110000h R/W SMI/SCI Status Register 00000000h R/WC 00h R/W 00000020h R/W -- -- Rort Port Dynamic Clock Gating Enable E8-EBh PECR1 11Ch-143h -- PCI Express Configuration Register 1 104h-107h UES Uncorrectable Error Status See bit description R/WC, RO 108h-10Bh UEM Uncorrectable Error Mask 00000000h R/WO, RO Reserved Datasheet PCI Express* Configuration Registers Table 19-1. PCI Express* Configuration Registers Address Map (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/) (Sheet 3 of 3) 19.1.1 Register Name 10Ch-10Fh UEV Uncorrectable Error Severity 00060011h RO 110h-113h CES Correctable Error Status 00000000h R/WC 114h-117h CEM Correctable Error Mask 00000000h R/WO 118h-11Bh AECC Advanced Error Capabilities and Control 00000000h RO 130h-133h RES Root Error Status 00000000h R/WC, RO 180h-183h RCTCL Root Complex Topology Capability List 00010005h RO RO 184h-187h ESD Element Self Description See bit description 190h-193h ULD Upstream Link Description 00000001h RO 198h-19Fh ULBA Upstream Link Base Address See bit description RO 300-303h PECR2 PCI Express Configuration Register 2 60005007h R/W 318h PEETM PCI Express Extended Test Mode Register See bit description RO 324h-327h PEC1 PCI Express Configuration Register 1 00000000h RO, R/W VID--Vendor Identification Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Attribute: Size: Bit 15:0 RO 16 bits Description Vendor ID--RO. This is a 16-bit value assigned to Intel. Intel VID = 8086h DID--Device Identification Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 02h-03h Default Value: Port 1= Bit Port 2= Bit Port 3= Bit Port 4= Bit Port 5= Bit Port 6= Bit Port 7= Bit Port 8= Bit Datasheet Type Mnemonic Address Offset: 00h-01h Default Value: 8086h 19.1.2 Function 0-5 Default Offset Description Description Description Description Description Description Description Description Attribute: Size: RO 16 bits Bit Description 15:0 Device ID--RO. This is a 16-bit value assigned to the PCH's PCI Express controller. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register 777 PCI Express* Configuration Registers 19.1.3 PCICMD--PCI Command Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 04h-05h Default Value: 0000h Bit 15:11 Attribute: Size: R/W, RO 16 bits Description Reserved Interrupt Disable--R/W. This disables pin-based INTx# interrupts on enabled HotPlug and power management events. This bit has no effect on MSI operation. 10 0 = Internal INTx# messages are generated if there is an interrupt for Hot-Plug or power management and MSI is not enabled. 1 = Internal INTx# messages will not be generated. This bit does not affect interrupt forwarding from devices connected to the root port. Assert_INTx and Deassert_INTx messages will still be forwarded to the internal interrupt controllers if this bit is set. 9 Fast Back to Back Enable (FBE)--Reserved per the PCI Express* Base Specification. SERR# Enable (SEE)--R/W. 8 0 = Disable. 1 = Enables the root port to generate an SERR# message when PSTS.SSE is set. 7 Wait Cycle Control (WCC)--Reserved per the PCI Express Base Specification. Parity Error Response (PER)--R/W. 6 0 = Disable. 1 = Indicates that the device is capable of reporting parity errors as a master on the backbone. 5 VGA Palette Snoop (VPS)--Reserved per the PCI Express* Base Specification. 4 Postable Memory Write Enable (PMWE)--Reserved per the PCI Express* Base Specification. 3 Special Cycle Enable (SCE)--Reserved per the PCI Express* Base Specification. Bus Master Enable (BME)--R/W. 2 0 = Disable. All cycles from the device are master aborted 1 = Enable. Allows the root port to forward cycles onto the backbone from a PCI Express* device. Memory Space Enable (MSE)--R/W. 1 0 = Disable. Memory cycles within the range specified by the memory base and limit registers are master aborted on the backbone. 1 = Enable. Allows memory cycles within the range specified by the memory base and limit registers can be forwarded to the PCI Express device. I/O Space Enable (IOSE)--R/W. This bit controls access to the I/O space registers. 0 778 0 = Disable. I/O cycles within the range specified by the I/O base and limit registers are master aborted on the backbone. 1 = Enable. Allows I/O cycles within the range specified by the I/O base and limit registers can be forwarded to the PCI Express device. Datasheet PCI Express* Configuration Registers 19.1.4 PCISTS--PCI Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 06h-07h Default Value: 0010h Bit Attribute: Size: R/WC, RO 16 bits Description Detected Parity Error (DPE)--R/WC. 15 0 = No parity error detected. 1 = Set when the root port receives a command or data from the backbone with a parity error. This is set even if PCIMD.PER (D28:F0/F1/F2/F3:04, bit 6) is not set. Signaled System Error (SSE)--R/WC. 14 0 = No system error signaled. 1 = Set when the root port signals a system error to the internal SERR# logic. Received Master Abort (RMA)--R/WC. 13 0 = Root port has not received a completion with unsupported request status from the backbone. 1 = Set when the root port receives a completion with unsupported request status from the backbone. Received Target Abort (RTA)--R/WC. 12 0 = Root port has not received a completion with completer abort from the backbone. 1 = Set when the root port receives a completion with completer abort from the backbone. Signaled Target Abort (STA)--R/WC. 11 10:9 0 = No target abort received. 1 = Set whenever the root port forwards a target abort received from the downstream device onto the backbone. DEVSEL# Timing Status (DEV_STS)--Reserved per the PCI Express* Base Specification. Master Data Parity Error Detected (DPED)--R/WC. 8 0 = No data parity error received. 1 = Set when the root port receives a completion with a data parity error on the backbone and PCIMD.PER (D28:F0/F1/F2/F3:04, bit 6) is set. 7 Fast Back to Back Capable (FB2BC)--Reserved per the PCI Express* Base Specification. 6 Reserved 5 66 MHz Capable--Reserved per the PCI Express* Base Specification. 4 Capabilities List--RO. Hardwired to 1. Indicates the presence of a capabilities list. Interrupt Status--RO. Indicates status of Hot-Plug and power management interrupts on the root port that result in INTx# message generation. 3 0 = Interrupt is de-asserted. 1 = Interrupt is asserted. This bit is not set if MSI is enabled. If MSI is not enabled, this bit is set regardless of the state of PCICMD.Interrupt Disable bit (D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7:04h:bit 10). 2:0 Datasheet Reserved 779 PCI Express* Configuration Registers 19.1.5 RID--Revision Identification Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Offset Address: 08h Default Value: See bit description Bit 7:0 19.1.6 RO 8 bits Description Intel(R) Revision ID--RO. See the 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Revision ID Register PI--Programming Interface Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 09h Default Value: 00h Bit 7:0 19.1.7 Attribute: Size: Attribute: Size: RO 8 bits Description Programming Interface--RO. 00h = No specific register level programming interface defined. SCC--Sub Class Code Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 0Ah Default Value: 04h Bit 7:0 Attribute: Size: RO 8 bits Description Sub Class Code (SCC)--RO. This field is determined by bit 2 of the MPC register (D28:F0-5:Offset D8h, bit 2). 04h = PCI-to-PCI bridge. 00h = Host Bridge. 19.1.8 BCC--Base Class Code Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 0Bh Default Value: 06h Bit 7:0 780 Attribute: Size: RO 8 bits Description Base Class Code (BCC)--RO. 06h = Indicates the device is a bridge device. Datasheet PCI Express* Configuration Registers 19.1.9 CLS--Cache Line Size Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 0Ch Default Value: 00h 19.1.10 R/W 8 bits Bit Description 7:0 Cache Line Size (CLS)--R/W. This is read/write but contains no functionality, per the PCI Express* Base Specification. PLT--Primary Latency Timer Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 0Dh Default Value: 00h Bit 19.1.11 Attribute: Size: Attribute: Size: RO 8 bits Description 7:3 Latency Count. Reserved per the PCI Express* Base Specification. 2:0 Reserved HEADTYP--Header Type Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 0Eh Default Value: 81h Bit Attribute: Size: RO 8 bits Description Multi-Function Device--RO. 7 6:0 0 = Single-function device. 1 = Multi-function device. Configuration Layout--RO. This field is determined by bit 2 of the MPC register (D28:F0-5:Offset D8h, bit 2). 00h = Indicates a Host Bridge. 01h = Indicates a PCI-to-PCI bridge. Datasheet 781 PCI Express* Configuration Registers 19.1.12 BNUM--Bus Number Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 18-1Ah Default Value: 000000h Bit 23:16 15:8 7:0 19.1.13 Subordinate Bus Number (SBBN)--R/W. Indicates the highest PCI bus number below the bridge. Secondary Bus Number (SCBN)--R/W. Indicates the bus number the port. Primary Bus Number (PBN)--R/W. Indicates the bus number of the backbone. SLT--Secondary Latency Timer (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Bit 7:0 Attribute: Size: RO 8 bits Description Secondary Latency Timer--Reserved for a Root Port per the PCI Express* Base Specification. IOBL--I/O Base and Limit Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 1Ch-1Dh Default Value: 0000h Attribute: Size: R/W, RO 16 bits Bit Description 15:12 I/O Limit Address (IOLA)--R/W. I/O Base bits corresponding to address lines 15:12 for 4-KB alignment. Bits 11:0 are assumed to be padded to FFFh. 11:8 782 R/W 24 bits Description Address Offset: 1Bh Default Value: 00h 19.1.14 Attribute: Size: I/O Limit Address Capability (IOLC)--R/O. Indicates that the bridge does not support 32-bit I/O addressing. 7:4 I/O Base Address (IOBA)--R/W. I/O Base bits corresponding to address lines 15:12 for 4-KB alignment. Bits 11:0 are assumed to be padded to 000h. 3:0 I/O Base Address Capability (IOBC)--R/O. Indicates that the bridge does not support 32-bit I/O addressing. Datasheet PCI Express* Configuration Registers 19.1.15 SSTS--Secondary Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 1Eh-1Fh Default Value: 0000h Bit Attribute: Size: R/WC 16 bits Description Detected Parity Error (DPE)--R/WC. 15 0 = No error. 1 = The port received a poisoned TLP. Received System Error (RSE)--R/WC. 14 0 = No error. 1 = The port received an ERR_FATAL or ERR_NONFATAL message from the device. Received Master Abort (RMA)--R/WC. 13 0 = Unsupported Request not received. 1 = The port received a completion with "Unsupported Request" status from the device. Received Target Abort (RTA)--R/WC. 12 0 = Completion Abort not received. 1 = The port received a completion with "Completion Abort" status from the device. Signaled Target Abort (STA)--R/WC. 11 10:9 0 = Completion Abort not sent. 1 = The port generated a completion with "Completion Abort" status to the device. Secondary DEVSEL# Timing Status (SDTS): Reserved per PCI Express* Base Specification. Data Parity Error Detected (DPD)--R/WC. 8 0 = Conditions below did not occur. 1 = Set when the BCTRL.PERE (D28:FO/F1/F2/F3/F4/F5:3E: bit 0) is set, and either of the following two conditions occurs: * Port receives completion marked poisoned. * Port poisons a write request to the secondary side. 7 Secondary Fast Back to Back Capable (SFBC): Reserved per PCI Express* Base Specification. 6 Reserved 5 Secondary 66 MHz Capable (SC66): Reserved per PCI Express* Base Specification. 4:0 Datasheet Reserved 783 PCI Express* Configuration Registers 19.1.16 MBL--Memory Base and Limit Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 20h-23h Default Value: 00000000h Attribute: Size: R/W 32 bits Accesses that are within the ranges specified in this register will be sent to the attached device if CMD.MSE (D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7:04:bit 1) is set. Accesses from the attached device that are outside the ranges specified will be forwarded to the backbone if CMD.BME (D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7:04:bit 2) is set. The comparison performed is MB AD[31:20] ML. Bit 31:20 Memory Limit (ML)--R/W. These bits are compared with bits 31:20 of the incoming address to determine the upper 1-MB aligned value of the range. 19:16 Reserved 15:4 3:0 19.1.17 Description Memory Base (MB)--R/W. These bits are compared with bits 31:20 of the incoming address to determine the lower 1-MB aligned value of the range. Reserved PMBL--Prefetchable Memory Base and Limit Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 24h-27h Default Value: 00010001h Attribute: Size: R/W, RO 32 bits Accesses that are within the ranges specified in this register will be sent to the device if CMD.MSE (D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7;04, bit 1) is set. Accesses from the device that are outside the ranges specified will be forwarded to the backbone if CMD.BME (D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7;04, bit 2) is set. The comparison performed is PMBU32:PMB AD[63:32]:AD[31:20] PMLU32:PML. Bit Description 31:20 Prefetchable Memory Limit (PML)--R/W. These bits are compared with bits 31:20 of the incoming address to determine the upper 1-MB aligned value of the range. 19:16 64-bit Indicator (I64L)--RO. Indicates support for 64-bit addressing 15:4 3:0 784 Prefetchable Memory Base (PMB)--R/W. These bits are compared with bits 31:20 of the incoming address to determine the lower 1-MB aligned value of the range. 64-bit Indicator (I64B)--RO. Indicates support for 64-bit addressing Datasheet PCI Express* Configuration Registers 19.1.18 PMBU32--Prefetchable Memory Base Upper 32 Bits Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/ F6/F7/F6/F7) Address Offset: 28h-2Bh Default Value: 00000000h Bit 31:0 19.1.19 Prefetchable Memory Base Upper Portion (PMBU)--R/W. Upper 32-bits of the prefetchable address base. PMLU32--Prefetchable Memory Limit Upper 32 Bits Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/ F6/F7/F6/F7) Bit 31:0 Attribute: Size: R/W 32 bits Description Prefetchable Memory Limit Upper Portion (PMLU)--R/W. Upper 32-bits of the prefetchable address limit. CAPP--Capabilities List Pointer Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 34h Default Value: 40h Bit 7:0 Datasheet R/W 32 bits Description Address Offset: 2Ch-2Fh Default Value: 00000000h 19.1.20 Attribute: Size: Attribute: Size: R0 8 bits Description Capabilities Pointer (PTR)--RO. Indicates that the pointer for the first entry in the capabilities list is at 40h in configuration space. 785 PCI Express* Configuration Registers 19.1.21 INTR--Interrupt Information Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 3Ch-3Dh Default Value: See bit description Function Level Reset: No (Bits 7:0 only) Bit Attribute: Size: R/W, RO 16 bits Description Interrupt Pin (IPIN)--RO. Indicates the interrupt pin driven by the root port. At reset, this register takes on the following values, which reflect the reset state of the D28IP register in chipset config space: 15:8 Port Reset Value 1 D28IP.P1IP 2 D28IP.P2IP 3 D28IP.P3IP 4 D28IP.P4IP 5 D28IP.P5IP 6 D28IP.P6IP 7 D28IP.P7IP 8 D28IP.P8IP NOTE: The value that is programmed into D28IP is always reflected in this register. 7:0 786 Interrupt Line (ILINE)--R/W. Default = 00h. Software written value to indicate which interrupt line (vector) the interrupt is connected to. No hardware action is taken on this register. These bits are not reset by FLR. Datasheet PCI Express* Configuration Registers 19.1.22 BCTRL--Bridge Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7/F6/F7) Address Offset: 3Eh-3Fh Default Value: 0000h Bit 15:12 Attribute: Size: R/W 16 bits Description Reserved 11 Discard Timer SERR# Enable (DTSE): Reserved per PCI Express* Base Specification, Revision 1.0a 10 Discard Timer Status (DTS): Reserved per PCI Express* Base Specification, Revision 1.0a. 9 Secondary Discard Timer (SDT): Reserved per PCI Express* Base Specification, Revision 1.0a. 8 Primary Discard Timer (PDT): Reserved per PCI Express* Base Specification, Revision 1.0a. 7 Fast Back to Back Enable (FBE): Reserved per PCI Express* Base Specification, Revision 1.0a. 6 Secondary Bus Reset (SBR)--R/W. Triggers a hot reset on the PCI Express* port. 5 Master Abort Mode (MAM): Reserved per Express specification. VGA 16-Bit Decode (V16)--R/W. 4 0 = VGA range is enabled. 1 = The I/O aliases of the VGA range (see BCTRL:VE definition below), are not enabled, and only the base I/O ranges can be decoded. VGA Enable (VE)--R/W. 3 0 = The ranges below will not be claimed off the backbone by the root port. 1 = The following ranges will be claimed off the backbone by the root port: * Memory ranges A0000h-BFFFFh * I/O ranges 3B0h - 3BBh and 3C0h - 3DFh, and all aliases of bits 15:10 in any combination of 1s ISA Enable (IE)--R/W. This bit only applies to I/O addresses that are enabled by the I/O Base and I/O Limit registers and are in the first 64 KB of PCI I/O space. 2 0 = The root port will not block any forwarding from the backbone as described below. 1 = The root port will block any forwarding from the backbone to the device of I/O transactions addressing the last 768 bytes in each 1-KB block (offsets 100h to 3FFh). SERR# Enable (SE)--R/W. 1 0 = The messages described below are not forwarded to the backbone. 1 = ERR_COR, ERR_NONFATAL, and ERR_FATAL messages received are forwarded to the backbone. Parity Error Response Enable (PERE)--R/W. When set, 0 Datasheet 0 = Poisoned write TLPs and completions indicating poisoned TLPs will not set the SSTS.DPD (D28:F0/F1/F2/F3/F4/F5/F6/F7:1E, bit 8). 1 = Poisoned write TLPs and completions indicating poisoned TLPs will set the SSTS.DPD (D28:F0/F1/F2/F3/F4/F5/F6/F7:1E, bit 8). 787 PCI Express* Configuration Registers 19.1.23 CLIST--Capabilities List Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 40-41h Default Value: 8010h Description 15:8 Next Capability (NEXT)--RO. Value of 80h indicates the location of the next pointer. Capability ID (CID)--RO. Indicates this is a PCI Express* capability. XCAP--PCI Express* Capabilities Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 42h-43h Default Value: 0042h Bit 15:14 13:9 8 788 RO 16 bits Bit 7:0 19.1.24 Attribute: Size: Attribute: Size: R/WO, RO 16 bits Description Reserved Interrupt Message Number (IMN)--RO. The PCH does not have multiple MSI interrupt numbers. Slot Implemented (SI)--R/WO. Indicates whether the root port is connected to a slot. Slot support is platform specific. BIOS programs this field, and it is maintained until a platform reset. 7:4 Device / Port Type (DT)--RO. Indicates this is a PCI Express* root port. 3:0 Capability Version (CV)--RO. Indicates PCI Express 2.0. Datasheet PCI Express* Configuration Registers 19.1.25 DCAP--Device Capabilities Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 44h-47h Default Value: 00008000h Bit 31:28 RO 32 bits Description Reserved 27:26 Captured Slot Power Limit Scale (CSPS)--RO. Not supported. 25:18 Captured Slot Power Limit Value (CSPV)--RO. Not supported. 17:16 Reserved 15 14:12 Datasheet Attribute: Size: Role Based Error Reporting (RBER)--RO. Indicates that this device implements the functionality defined in the Error Reporting ECN as required by the PCI Express 2.0 specification. Reserved 11:9 Endpoint L1 Acceptable Latency (E1AL)--RO. This field is reserved with a setting of 000b for devices other than Endpoints, per the PCI Express 2.0 specification. 8:6 Endpoint L0s Acceptable Latency (E0AL)--RO. This field is reserved with a setting of 000b for devices other than Endpoints, per the PCI Express 2.0 specification. 5 Extended Tag Field Supported (ETFS)--RO. Indicates that 8-bit tag fields are supported. 4:3 Phantom Functions Supported (PFS)--RO. No phantom functions supported. 2:0 Max Payload Size Supported (MPS)--RO. Indicates the maximum payload size supported is 128B. 789 PCI Express* Configuration Registers 19.1.26 DCTL--Device Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 48h-49h Default Value: 0000h Bit 15 14:12 Attribute: Size: R/W, RO 16 bits Description Reserved Max Read Request Size (MRRS)--RO. Hardwired to 0. 11 Enable No Snoop (ENS)--RO. Not supported. The root port will never issue non-snoop requests. 10 Aux Power PM Enable (APME)--R/W. The OS will set this bit to 1 if the device connected has detected aux power. It has no effect on the root port otherwise. 9 8 7:5 4 Phantom Functions Enable (PFE)--RO. Not supported. Extended Tag Field Enable (ETFE)--RO. Not supported. Max Payload Size (MPS)--R/W. The root port only supports 128-B payloads, regardless of the programming of this field. Enable Relaxed Ordering (ERO)--RO. Not supported. Unsupported Request Reporting Enable (URE)--R/W. 3 0 = The root port will ignore unsupported request errors. 1 = Allows signaling ERR_NONFATAL, ERR_FATAL, or ERR_COR to the Root Control register when detecting an unmasked Unsupported Request (UR). An ERR_COR is signaled when a unmasked Advisory Non-Fatal UR is received. An ERR_FATAL, ERR_or NONFATAL, is sent to the Root Control Register when an uncorrectable nonAdvisory UR is received with the severity set by the Uncorrectable Error Severity register. Fatal Error Reporting Enable (FEE)--R/W. 2 0 = The root port will ignore fatal errors. 1 = Enables signaling of ERR_FATAL to the Root Control register due to internally detected errors or error messages received across the link. Other bits also control the full scope of related error reporting. Non-Fatal Error Reporting Enable (NFE)--R/W. 1 0 = The root port will ignore non-fatal errors. 1 = Enables signaling of ERR_NONFATAL to the Root Control register due to internally detected errors or error messages received across the link. Other bits also control the full scope of related error reporting. Correctable Error Reporting Enable (CEE)--R/W. 0 790 0 = The root port will ignore correctable errors. 1 = Enables signaling of ERR_CORR to the Root Control register due to internally detected errors or error messages received across the link. Other bits also control the full scope of related error reporting. Datasheet PCI Express* Configuration Registers 19.1.27 DSTS--Device Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 4Ah-4Bh Default Value: 0010h Attribute: Size: Bit 15:6 R/WC, RO 16 bits Description Reserved 5 Transactions Pending (TDP)--RO. This bit has no meaning for the root port since only one transaction may be pending to the PCH, so a read of this bit cannot occur until it has already returned to 0. 4 AUX Power Detected (APD)--RO. The root port contains AUX power for wakeup. 3 Unsupported Request Detected (URD)--R/WC. Indicates an unsupported request was detected. Fatal Error Detected (FED)--R/WC. Indicates a fatal error was detected. 2 0 = Fatal has not occurred. 1 = A fatal error occurred from a data link protocol error, link training error, buffer overflow, or malformed TLP. Non-Fatal Error Detected (NFED)--R/WC. Indicates a non-fatal error was detected. 1 0 = Non-fatal has not occurred. 1 = A non-fatal error occurred from a poisoned TLP, unexpected completions, unsupported requests, completer abort, or completer timeout. Correctable Error Detected (CED)--R/WC. Indicates a correctable error was detected. 0 19.1.28 0 = Correctable has not occurred. 1 = The port received an internal correctable error from receiver errors / framing errors, TLP CRC error, DLLP CRC error, replay num rollover, replay timeout. LCAP--Link Capabilities Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 4Ch-4Fh Default Value: See bit description Bit Attribute: Size: R/WO, RO 32 bits Description Port Number (PN)--RO. Indicates the port number for the root port. This value is different for each implemented port: 31:24 Datasheet Function Port # Value of PN Field D28:F0 1 01h D28:F1 2 02h D28:F2 3 03h D28:F3 4 04h D28:F4 5 05h D28:F5 6 06h D28:F6 7 07h D28:F7 8 08h 791 PCI Express* Configuration Registers Bit 23:21 20 Description Reserved Link Active Reporting Capable (LARC)--RO. Hardwired to 1 to indicate that this port supports the optional capability of reporting the DL_Active state of the Data Link Control and Management State Machine. 19:18 Reserved 17:15 L1 Exit Latency (EL1)--RO. Set to 010b to indicate an exit latency of 2 s to 4 s. L0s Exit Latency (EL0)--RO. Indicates as exit latency based upon common-clock configuration. 14:12 LCLT.CCC Value of EL0 (these bits) 0 MPC.UCEL (D28:F0/F1/F2/F3:D8h:bits20:18) 1 MPC.CCEL (D28:F0/F1/F2/F3:D8h:bits17:15) NOTE: LCLT.CCC is at D28:F0/F1/F2/F3/F4/F5/F6/F7:50h:bit 6 Active State Link PM Support (APMS)--R/WO. Indicates what level of active state link power management is supported on the root port. 11:10 Bits Definition 00b Neither L0s nor L1 are supported 01b L0s Entry Supported 10b L1 Entry Supported 11b Both L0s and L1 Entry Supported Maximum Link Width (MLW)--RO. For the root ports, several values can be taken, based upon the value of the chipset config register field RPC.PC1 (Chipset Config Registers:Offset 0224h:bits1:0) for Ports 1-4 and RPC.PC2 (Chipset Config Registers:Offset 0224h:bits1:0) for Ports 5 and 6 Value of MLW Field 9:4 3:0 792 Port # RPC.PC1=00b RPC.PC1=11b 1 01h 04h 2 01h 01h 3 01h 01h 4 01h 01h Port # RPC.PC2=00b RPC.PC2=11b 5 01h 04h 6 01h 01h 7 01h 01h 8 01h 01h Maximum Link Speed (MLS)--RO. Set to 1h to indicate the link speed is 2.5 Gb/s. Datasheet PCI Express* Configuration Registers 19.1.29 LCTL--Link Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 50h-51h Default Value: 0000h Bit 15:10 Attribute: Size: R/W, RO 16 bits Description Reserved 9 Hardware Autonomous Width Disable - RO. Hardware never attempts to change the link width except when attempting to correct unreliable Link operation. 8 Reserved Extended Synch (ES)--R/W. 7 0 = Extended synch disabled. 1 = Forces extended transmission of FTS ordered sets in FTS and extra TS2 at exit from L1 prior to entering L0. 6 0 = The PCH and device are not using a common reference clock. 1 = The PCH and device are operating with a distributed common reference clock. Common Clock Configuration (CCC)--R/W. Retrain Link (RL)--R/W. 5 0 = This bit always returns 0 when read. 1 = The root port will train its downstream link. NOTE: Software uses LSTS.LT (D28:F0/F1/F2/F3/F4/F5/F6/F7:52, bit 11) to check the status of training. NOTE: It is permitted to write 1b to this bit while simultaneously writing modified values to other fields in this register. If the LTSSM is not already in Recovery or Configuration, the resulting Link training must use the modified values. If the LTSSM is already in Recovery or Configuration, the modified values are not required to affect the Link training that is already in progress. Link Disable (LD)--R/W. 4 0 = Link enabled. 1 = The root port will disable the link. 3 Read Completion Boundary Control (RCBC)--RO. Indicates the read completion boundary is 64 bytes. 2 Reserved Active State Link PM Control (APMC)--R/W. Indicates whether the root port should enter L0s or L1 or both. 1:0 Datasheet Bits Definition 00 Disabled 01 L0s Entry Enabled 10 L1 Entry Enabled 11 L0s and L1 Entry Enabled 793 PCI Express* Configuration Registers 19.1.30 LSTS--Link Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 52h-53h Default Value: See bit description Bit 15:14 Attribute: Size: RO 16 bits Description Reserved Data Link Layer Active (DLLA)--RO. Default value is 0b. 13 12 0 = Data Link Control and Management State Machine is not in the DL_Active state 1 = Data Link Control and Management State Machine is in the DL_Active state Slot Clock Configuration (SCC)--RO. Set to 1b to indicate that the PCH uses the same reference clock as on the platform and does not generate its own clock. Link Training (LT)--RO. Default value is 0b. 11 0 = Link training completed. 1 = Link training is occurring. 10 Link Training Error (LTE)--RO. Not supported. Set value is 0b. Negotiated Link Width (NLW)--RO. This field indicates the negotiated width of the given PCI Express* link. The contents of this NLW field is undefined if the link has not successfully trained. Port # 9:4 Possible Values 1 000001b, 000010b, 000100b 2 000001b 3 000001b 4 000001b 5 000001b, 000010b, 000100b 6 000001b 7 000001b 8 000001b NOTE: 000001b = x1 link width, 000010b =x2 linkwidth, 000100b = x4 linkwidth 3:0 Link Speed (LS)--RO. This field indicates the negotiated Link speed of the given PCI Express* link. 01h = Link is 2.5 Gb/s. 794 Datasheet PCI Express* Configuration Registers 19.1.31 SLCAP--Slot Capabilities Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 54h-57h Default Value: 00040060h Bit R/WO, RO 32 bits Description 31:19 Physical Slot Number (PSN)--R/WO. This is a value that is unique to the slot number. BIOS sets this field and it remains set until a platform reset. 18:17 Reserved 16:15 Slot Power Limit Scale (SLS)--R/WO. Specifies the scale used for the slot power limit value. BIOS sets this field and it remains set until a platform reset. 14:7 6 5 4 3 2 1 0 Datasheet Attribute: Size: Slot Power Limit Value (SLV)--R/WO. Specifies the upper limit (in conjunction with SLS value), on the upper limit on power supplied by the slot. The two values together indicate the amount of power in watts allowed for the slot. BIOS sets this field and it remains set until a platform reset. Hot Plug Capable (HPC)--R/WO. 1b = Indicates that Hot-Plug is supported. Hot Plug Surprise (HPS)--R/WO. 1b = Indicates the device may be removed from the slot without prior notification. Power Indicator Present (PIP)--RO. 0b = Indicates that a power indicator LED is not present for this slot. Attention Indicator Present (AIP)--RO. 0b = Indicates that an attention indicator LED is not present for this slot. MRL Sensor Present (MSP)--RO. 0b = Indicates that an MRL sensor is not present. Power Controller Present (PCP)--RO. 0b = Indicates that a power controller is not implemented for this slot. Attention Button Present (ABP)--RO. 0b = Indicates that an attention button is not implemented for this slot. 795 PCI Express* Configuration Registers 19.1.32 SLCTL--Slot Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 58h-59h Default Value: 0000h Bit 15:13 Attribute: Size: R/W, RO 16 bits Description Reserved 12 Link Active Changed Enable (LACE)--R/W. When set, this field enables generation of a hot plug interrupt when the Data Link Layer Link Active field (D28:F0/F1/F2/F3/F4/ F5/F6/F7:52h:bit 13) is changed. 11 Reserved 10 Power Controller Control (PCC)--RO.This bit has no meaning for module based HotPlug. 9:6 Reserved Hot Plug Interrupt Enable (HPE)--R/W. 5 0 = Hot plug interrupts based on Hot-Plug events is disabled. 1 = Enables generation of a Hot-Plug interrupt on enabled Hot-Plug events. 4 Reserved Presence Detect Changed Enable (PDE)--R/W. 3 2:0 796 0 = Hot plug interrupts based on presence detect logic changes is disabled. 1 = Enables the generation of a Hot-Plug interrupt or wake message when the presence detect logic changes state. Reserved Datasheet PCI Express* Configuration Registers 19.1.33 SLSTS--Slot Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 5Ah-5Bh Default Value: 0000h Bit 15:9 Attribute: Size: R/WC, RO 16 bits Description Reserved Link Active State Changed (LASC)--R/WC. 8 7 1 = This bit is set when the value reported in Data Link Layer Link Active field of the Link Status register (D28:F0/F1/F2/F3/F4/F5/F6/F7:52h:bit 13) is changed. In response to a Data Link Layer State Changed event, software must read Data Link Layer Link Active field of the Link Status register to determine if the link is active before initiating configuration cycles to the hot plugged device. Reserved Presence Detect State (PDS)--RO. If XCAP.SI (D28:F0/F1/F2/F3/F4/F5/F6/ F7:42h:bit 8) is set (indicating that this root port spawns a slot), then this bit: 6 0 = Indicates the slot is empty. 1 = Indicates the slot has a device connected. Otherwise, if XCAP.SI is cleared, this bit is always set (1). 5 4 MRL Sensor State (MS)--Reserved as the MRL sensor is not implemented. Reserved Presence Detect Changed (PDC)--R/WC. Datasheet 3 0 = No change in the PDS bit. 1 = The PDS bit changed states. 2 MRL Sensor Changed (MSC)--Reserved as the MRL sensor is not implemented. 1 Power Fault Detected (PFD)--Reserved as a power controller is not implemented. 0 Reserved 797 PCI Express* Configuration Registers 19.1.34 RCTL--Root Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 5Ch-5Dh Default Value: 0000h Bit 15:4 Attribute: Size: R/W 16 bits Description Reserved PME Interrupt Enable (PIE)--R/W. 3 0 = Interrupt generation disabled. 1 = Interrupt generation enabled when PCISTS.Inerrupt Status (D28:F0/F1/F2/F3/F4/ F5/F6/F7:60h, bit 16) is in a set state (either due to a 0 to 1 transition, or due to this bit being set with RSTS.IS already set). System Error on Fatal Error Enable (SFE)--R/W. 2 0 = An SERR# will not be generated. 1 = An SERR# will be generated, assuming CMD.SEE (D28:F0/F1/F2/F3/F4/F5/F6/ F7:04, bit 8) is set, if a fatal error is reported by any of the devices in the hierarchy of this root port, including fatal errors in this root port. System Error on Non-Fatal Error Enable (SNE)--R/W. 1 0 = An SERR# will not be generated. 1 = An SERR# will be generated, assuming CMD.SEE (D28:F0/F1/F2/F3/F4/F5/F6/ F7:04, bit 8) is set, if a non-fatal error is reported by any of the devices in the hierarchy of this root port, including non-fatal errors in this root port. System Error on Correctable Error Enable (SCE)--R/W. 0 19.1.35 0 = An SERR# will not be generated. 1 = An SERR# will be generated, assuming CMD.SEE (D28:F0/F1/F2/F3/F4/F5/F6/ F7:04, bit 8) if a correctable error is reported by any of the devices in the hierarchy of this root port, including correctable errors in this root port. RSTS--Root Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 60h-63h Default Value: 00000000h Bit 31:18 Attribute: Size: R/WC, RO 32 bits Description Reserved PME Pending (PP)--RO. 17 0 = When the original PME is cleared by software, it will be set again, the requestor ID will be updated, and this bit will be cleared. 1 = Indicates another PME is pending when the PME status bit is set. PME Status (PS)--R/WC. 16 15:0 798 0 = PME was not asserted. 1 = Indicates that PME was asserted by the requestor ID in RID. Subsequent PMEs are kept pending until this bit is cleared. PME Requestor ID (RID)--RO. Indicates the PCI requestor ID of the last PME requestor. Valid only when PS is set. Datasheet PCI Express* Configuration Registers 19.1.36 DCAP2--Device Capabilities 2 Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 64h-67h Default Value: 00000016h Bit 31:5 4 3:0 Attribute: Size: RO 32 bits Description Reserved Completion Timeout Disable Supported (CTDS)--RO. A value of 1b indicates support for the Completion Timeout Disable mechanism. Completion Timeout Ranges Supported (CTRS) - RO. This field indicates device support for the optional Completion Timeout programmability mechanism. This mechanism allows system software to modify the Completion Timeout value. This field is hardwired to support 10 ms to 250 ms and 250 ms to 4 s. 19.1.37 DCTL2--Device Control 2 Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 68h-69h Default Value: 0000h Bit 15:5 Attribute: Size: RO, R/W 16 bits Description Reserved Completion Timeout Disable (CTD)--RW. When set to 1b, this bit disables the Completion Timeout mechanism. 4 If there are outstanding requests when the bit is cleared, it is permitted but not required for hardware to apply the completion timeout mechanism to the outstanding requests. If this is done, it is permitted to base the start time for each request on either the time this bit was cleared or the time each request was issued. Completion Timeout Value (CTV)--RW. This field allows system software to modify the Completion Timeout value. 0000b = Default range: 40-50 ms (spec range 50 us to 50 ms) 0101b = 40-50 ms (spec range is 16 ms to 55 ms) 0110b = 160-170 ms (spec range is 65 ms to 210 ms) 1001b = 400-500 ms (spec range is 260 ms to 900 ms) 3:0 1010b = 1.6-1.7 s (spec range is 1 s to 3.5 s) All other values are Reserved. NOTE: Software is permitted to change the value in this field at any time. For requests already pending when the Completion Timeout Value is changed, hardware is permitted to use either the new or the old value for the outstanding requests, and is permitted to base the start time for each request either on when this value was changed or on when each request w as issued. Datasheet 799 PCI Express* Configuration Registers 19.1.38 LCTL2--Link Control 2 Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 70h-71h Default Value: 0001h Bit 15:4 3:0 Attribute: Size: RO 16 bits Description Reserved Target Link Speed (TLS)--RO. This field sets an upper limit on Link operational speed by restricting the values advertised by the upstream component in its training sequences. 0001b: 2.5 GT/s Target Link Speed All other values reserved 19.1.39 MID--Message Signaled Interrupt Identifiers Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 80h-81h Default Value: 9005h Bit 15:8 7:0 19.1.40 Attribute: Size: RO 16 bits Description Next Pointer (NEXT)--RO. Indicates the location of the next pointer in the list. Capability ID (CID)--RO. Capabilities ID indicates MSI. MC--Message Signaled Interrupt Message Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 82-83h Default Value: 0000h Bit 15:8 7 Attribute: Size: R/W, RO 16 bits Description Reserved 64 Bit Address Capable (C64)--RO. Capable of generating a 32-bit message only. 6:4 Multiple Message Enable (MME)--R/W. These bits are R/W for software compatibility, but only one message is ever sent by the root port. 3:1 Multiple Message Capable (MMC)--RO. Only one message is required. MSI Enable (MSIE)--R/W. 0 0 = MSI is disabled. 1 = MSI is enabled and traditional interrupt pins are not used to generate interrupts. NOTE: CMD.BME (D28:F0/F1/F2/F3/F4/F5/F6/F7:04h:bit 2) must be set for an MSI to be generated. If CMD.BME is cleared, and this bit is set, no interrupts (not even pin based) are generated. 800 Datasheet PCI Express* Configuration Registers 19.1.41 MA--Message Signaled Interrupt Message Address Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 84h-87h Default Value: 00000000h Bit 31:2 1:0 19.1.42 Address (ADDR)--R/W. Lower 32 bits of the system specified message address, always DW aligned. Reserved MD--Message Signaled Interrupt Message Data Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Bit 15:0 R/W 16 bits Data (DATA)--R/W. This 16-bit field is programmed by system software if MSI is enabled. Its content is driven onto the lower word (PCI AD[15:0]) during the data phase of the MSI memory write transaction. SVCAP--Subsystem Vendor Capability Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Bit 15:8 7:0 Attribute: Size: RO 16 bits Description Next Capability (NEXT)--RO. Indicates the location of the next pointer in the list. Capability Identifier (CID)--RO. Value of 0Dh indicates this is a PCI bridge subsystem vendor capability. SVID--Subsystem Vendor Identification Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 94h-97h Default Value: 00000000h Bit Datasheet Attribute: Size: Description Address Offset: 90h-91h Default Value: A00Dh 19.1.44 R/W 32 bits Description Address Offset: 88h-89h Default Value: 0000h 19.1.43 Attribute: Size: Attribute: Size: R/WO 32 bits Description 31:16 Subsystem Identifier (SID)--R/WO. Indicates the subsystem as identified by the vendor. This field is write once and is locked down until a bridge reset occurs (not the PCI bus reset). 15:0 Subsystem Vendor Identifier (SVID)--R/WO. Indicates the manufacturer of the subsystem. This field is write once and is locked down until a bridge reset occurs (not the PCI bus reset). 801 PCI Express* Configuration Registers 19.1.45 PMCAP--Power Management Capability Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: A0h-A1h Default Value: 0001h Bit 15:8 7:0 19.1.46 Attribute: Size: RO 16 bits Description Next Capability (NEXT)--RO. Indicates this is the last item in the list. Capability Identifier (CID)--RO. Value of 01h indicates this is a PCI power management capability. PMC--PCI Power Management Capabilities Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: A2h-A3h Default Value: C802h Attribute: Size: RO 16 bits Bit Description 15:11 PME_Support (PMES)--RO. Indicates PME# is supported for states D0, D3HOT and D3COLD. The root port does not generate PME#, but reporting that it does is necessary for some legacy operating systems to enable PME# in devices connected behind this root port. 10 D2_Support (D2S)--RO. The D2 state is not supported. 9 D1_Support (D1S)--RO The D1 state is not supported. 8:6 Aux_Current (AC)--RO. Reports 375 mA maximum suspend well current required when in the D3COLD state. Device Specific Initialization (DSI)--RO. 5 1 = Indicates that no device-specific initialization is required. 4 Reserved PME Clock (PMEC)--RO. 3 1 = Indicates that PCI clock is not required to generate PME#. 2:0 802 Version (VS)--RO. Indicates support for Revision 1.1 of the PCI Power Management Specification. Datasheet PCI Express* Configuration Registers 19.1.47 PMCS--PCI Power Management Control and Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: A4h-A7h Default Value: 00000000h Bit 31:24 Attribute: Size: R/W, RO 32 bits Description Reserved 23 Bus Power / Clock Control Enable (BPCE)--Reserved per PCI Express* Base Specification, Revision 1.0a. 22 B2/B3 Support (B23S)--Reserved per PCI Express* Base Specification, Revision 1.0a. 21:16 Reserved PME Status (PMES)--RO. 15 1 = Indicates a PME was received on the downstream link. 14:9 Reserved PME Enable (PMEE)--R/W. 8 1 = Indicates PME is enabled. The root port takes no action on this bit, but it must be R/W for some legacy operating systems to enable PME# on devices connected to this root port. This bit is sticky and resides in the resume well. The reset for this bit is RSMRST# which is not asserted during a warm reset. 7:2 Reserved Power State (PS)--R/W. This field is used both to determine the current power state of the root port and to set a new power state. The values are: 00 = D0 state 11 = D3HOT state 1:0 Datasheet NOTE: When in the D3HOT state, the controller's configuration space is available, but the I/O and memory spaces are not. Type 1 configuration cycles are also not accepted. Interrupts are not required to be blocked as software will disable interrupts prior to placing the port into D3HOT. If software attempts to write a `10' or `01' to these bits, the write will be ignored. 803 PCI Express* Configuration Registers 19.1.48 MPC2--Miscellaneous Port Configuration Register 2 (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: D4h-D7h Default Value: 00000000h Bit 31:6 Attribute: Size: R/W, RO 32 bits Description Reserved PCIe 2.0 Compliance Mode Enable (PCME)--R/W. 5 0 = Compliance mode is disabled. 1 = With proper termination PCH PCIe ports will transmit compliance pattern. Note: This bit should only be set when testing for electrical compliance specified by the PCI SIG. This bit should not be set during normal system operations. ASPM Control Override Enable (ASPMCOEN)--RW. 1 = Root port will use the values in the ASPM Control Override registers 4 0 = Root port will use the ASPM Registers in the Link Control register. NOTES:This register allows BIOS to control the root port ASPM settings instead of the OS. ASPM Control Override (ASPMO)--RW. Provides BIOS control of whether root port should enter L0s or L1 or both. 3:2 00 = Disabled 01 = L0s Entry Enabled 10 = L1 Entry Enabled 11 = L0s and L1 Entry Enabled. EOI Forwarding Disable (EOIFD)--R/W. When set, EOI messages are not claimed on the backbone by this port an will not be forwarded across the PCIe link. 1 0 = Broadcast EOI messages that are sent on the backbone are claimed by this port and forwarded across the PCIe link. 1 = Broadcast EOI messages are not claimed on the backbone by this port and will not be forwarded across the PCIe Link. L1 Completion Timeout Mode (LICTM)--R/W. 0 804 0 = PCI Express Specification Compliant. Completion timeout is disabled during software initiated L1, and enabled during ASPM initiate L1. 1 = Completion timeout is enabled during L1, regardless of how L1 entry was initiated. Datasheet PCI Express* Configuration Registers 19.1.49 MPC--Miscellaneous Port Configuration Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: D8h-DBh Default Value: 08110000h Bit Attribute: Size: R/W, RO 32 bits Description Power Management SCI Enable (PMCE)--R/W. 31 0 = SCI generation based on a power management event is disabled. 1 = Enables the root port to generate SCI whenever a power management event is detected. Hot Plug SCI Enable (HPCE)--R/W. 30 0 = SCI generation based on a Hot-Plug event is disabled. 1 = Enables the root port to generate SCI whenever a Hot-Plug event is detected. Link Hold Off (LHO)--R/W. 29 28 1 = Port will not take any TLP. This is used during loopback mode to fill up the downstream queue. Address Translator Enable (ATE)--R/W. This bit is used to enable address translation using the AT bits in this register during loopback mode. 0 = Disable 1 = Enable Lane Reversal (LR)--R/O. This register reads the setting of the PCIELR1 Soft Strap. 27 0 = PCI Express Lanes 0-3 are reversed. 1 = No Lane reversal (default). NOTE: The port configuration straps must be set such that Port 1 or Port 5 is configured as a x4 port using lanes 0-3, or 4-7 when Lane Reversal is enabled. x2 lane reversal is not supported. NOTE: This register is only valid on port 1 (for ports 1-4) or port 5 (for ports 5-8). 26 Invalid Receive Bus Number Check Enable (IRBNCE)--R/W. When set, the receive transaction layer will signal an error if the bus number of a Memory request does not fall within the range between SCBN and SBBN. If this check is enabled and the request is a memory write, it is treated as an Unsupported Request. If this check is enabled and the request is a non-posted memory read request, the request is considered a Malformed TLP and a fatal error. Messages, I/O, Config, and Completions are never checked for valid bus number. 25 Invalid Receive Range Check Enable (IRRCE)--R/W. When set, the receive transaction layer will treat the TLP as an Unsupported Request error if the address range of a Memory request does not outside the range between prefetchable and nonprefetchable base and limit. Messages, I/O, Configuration, and Completions are never checked for valid address ranges. 24 BME Receive Check Enable (BMERCE)--R/W. When set, the receive transaction layer will treat the TLP as an Unsupported Request error if a memory read or write request is received and the Bus Master Enable bit is not set. Messages, IO, Config, and Completions are never checked for BME. 23 Datasheet Reserved 805 PCI Express* Configuration Registers Bit Description Detect Override (FORCEDET)--R/W. 22 0 = Normal operation. Detected output from AFE is sampled for presence detection. 1 = Override mode. Ignores AFE detect output and link training proceeds as if a device were detected. Flow Control During L1 Entry (FCDL1E)--R/W. 21 0 = No flow control update DLLPs sent during L1 Ack transmission. 1 = Flow control update DLLPs sent during L1 Ack transmission as required to meet the 30 s periodic flow control update. 20:18 Unique Clock Exit Latency (UCEL)--R/W. This value represents the L0s Exit Latency for unique-clock configurations (LCTL.CCC = 0) (D28:F0/F1/F2/F3/F4/F5/F6/F7:Offset 50h:bit 6). It defaults to 512 ns to less than 1 s, but may be overridden by BIOS. 17:15 Common Clock Exit Latency (CCEL)--R/W. This value represents the L0s Exit Latency for common-clock configurations (LCTL.CCC = 1) (D28:F0/F1/F2/F3/F4/F5/F6/ F7:Offset 50h:bit 6). It defaults to 128 ns to less than 256 ns, but may be overridden by BIOS. 14:8 Reserved Port I/OxApic Enable (PAE)--R/W. 0 = Hole is disabled. 1 = A range is opened through the bridge for the following memory addresses: 7 6:3 Port # Address 1 FEC1_0000h - FEC1_7FFFh 2 FEC1_8000h - FEC1_FFFFh 3 FEC2_0000h - FEC2_7FFFh 4 FEC2_8000h - FEC2_FFFFh 5 FEC3_0000h - FEC3_7FFFh 6 FEC3_8000h - FEC3_FFFFh 7 FEC4_0000h - FEC4_7FFFh 8 FEC4_8000h - FEC4_FFFFh Reserved Bridge Type (BT)--RO. This register can be used to modify the Base Class and Header Type fields from the default P2P bridge to a Host Bridge. Having the root port appear as a Host Bridge is useful in some server configurations. 2 0 = The root port bridge type is a P2P Bridge, Header Sub-Class = 04h, and Header Type = Type 1. 1 = The root port bridge type is a P2P Bridge, Header Sub-Class = 00h, and Header Type = Type 0. Hot Plug SMI Enable (HPME)--R/W. 1 0 = SMI generation based on a Hot-Plug event is disabled. 1 = Enables the root port to generate SMI whenever a Hot-Plug event is detected. Power Management SMI Enable (PMME)--R/W. 0 806 0 = SMI generation based on a power management event is disabled. 1 = Enables the root port to generate SMI whenever a power management event is detected. Datasheet PCI Express* Configuration Registers 19.1.50 SMSCS--SMI/SCI Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: DCh-DFh Default Value: 00000000h Bit Attribute: Size: R/WC 32 bits Description Power Management SCI Status (PMCS)--R/WC. 31 1 = PME control logic needs to generate an interrupt, and this interrupt has been routed to generate an SCI. Hot Plug SCI Status (HPCS)--R/WC. 30 29:5 1 = Hot-Plug controller needs to generate an interrupt, and has this interrupt been routed to generate an SCI. Reserved Hot Plug Link Active State Changed SMI Status (HPLAS)--R/WC. 4 3:2 1 = SLSTS.LASC (D28:F0/F1/F2/F3/F4/F5/F6/F7:5A, bit 8) transitioned from 0-to-1, and MPC.HPME (D28:F0/F1/F2/F3/F4/F5/F6/F7:D8, bit 1) is set. When this bit is set, an SMI# will be generated. Reserved Hot Plug Presence Detect SMI Status (HPPDM)--R/WC. 1 1 = SLSTS.PDC (D28:F0/F1/F2/F3/F4/F5/F6/F7:5A, bit 3) transitioned from 0-to-1, and MPC.HPME (D28:F0/F1/F2/F3/F4/F5/F6/F7:D8, bit 1) is set. When this bit is set, an SMI# will be generated. Power Management SMI Status (PMMS)--R/WC. 0 Datasheet 1 = RSTS.PS (D28:F0/F1/F2/F3/F4/F5/F6/F7:60, bit 16) transitioned from 0-to-1, and MPC.PMME (D28:F0/F1/F2/F3/F4/F5/F6/F7:D8, bit 1) is set. 807 PCI Express* Configuration Registers 19.1.51 RPDCGEN--Root Port Dynamic Clock Gating Enable (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: E1h Default Value: 00h Bits 7:4 Attribute: Size: R/W 8-bits Description Reserved. RO Shared Resource Dynamic Link Clock Gating Enable (SRDLCGEN)--RW. 0 = Disables dynamic clock gating of the shared resource link clock domain. 1 = Enables dynamic clock gating on the root port shared resource link clock domain. 3 Only the value from Port 1 is used for ports 1-4. Only the value from Port 5 is used for ports 5-8. Shared Resource Dynamic Backbone Clock Gate Enable (SRDBCGEN)--RW. 0 = Disables dynamic clock gating of the shared resource backbone clock domain. 1 = Enables dynamic clock gating on the root port shared resource backbone clock domain. 2 Only the value from Port 1 is used for ports 1-4. Only the value from Port 5 is used for ports 5-8. Root Port Dynamic Link Clock Gate Enable (RPDLCGEN)--RW. 1 0 = Disables dynamic clock gating of the root port link clock domain. 1 = Enables dynamic clock gating on the root port link clock domain. Root Port Dynamic Backbone Clock Gate Enable (RPDBCGEN)--RW. 0 19.1.52 0 = Disables dynamic clock gating of the root port backbone clock domain. 1 = Enables dynamic clock gating on the root port backbone clock domain. PECR1--PCI Express* Configuration Register 1 (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: E8h-EBh Default Value: 00000020h Bit 31:2 808 Attribute: Size: R/W 32 bits Description Reserved 1 PECR1 Field 2--R/W. BIOS may set this bit to 1. 0 Reserved Datasheet PCI Express* Configuration Registers 19.1.53 UES--Uncorrectable Error Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 104h-107h Default Value: 00000000000x0xxx0x0x0000000x0000b Attribute: Size: R/WC, RO 32 bits This register maintains its state through a platform reset. It loses its state upon suspend. Bit 31:21 Reserved 20 Unsupported Request Error Status (URE)--R/WC. Indicates an unsupported request was received. 19 ECRC Error Status (EE)--RO. ECRC is not supported. 18 Malformed TLP Status (MT)--R/WC. Indicates a malformed TLP was received. 17 Receiver Overflow Status (RO)--R/WC. Indicates a receiver overflow occurred. 16 Unexpected Completion Status (UC)--R/WC. Indicates an unexpected completion was received. 15 Completion Abort Status (CA)--R/WC. Indicates a completer abort was received. 14 Completion Timeout Status (CT)--R/WC. Indicates a completion timed out. This bit is set if Completion Timeout is enabled and a completion is not returned within the time specified by the Completion TImeout Value 13 Flow Control Protocol Error Status (FCPE)--RO. Flow Control Protocol Errors not supported. 12 Poisoned TLP Status (PT)--R/WC. Indicates a poisoned TLP was received. 11:5 4 3:1 0 Datasheet Description Reserved Data Link Protocol Error Status (DLPE)--R/WC. Indicates a data link protocol error occurred. Reserved Training Error Status (TE)--RO. Training Errors not supported. 809 PCI Express* Configuration Registers 19.1.54 UEM--Uncorrectable Error Mask (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 108h-10Bh Default Value: 00000000h Attribute: Size: R/WO, RO 32 bits When set, the corresponding error in the UES register is masked, and the logged error will cause no action. When cleared, the corresponding error is enabled. Bit 31:21 Description Reserved Unsupported Request Error Mask (URE)--R/WO. 20 19 0 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is enabled. 1 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is masked. ECRC Error Mask (EE)--RO. ECRC is not supported. Malformed TLP Mask (MT)--R/WO. 18 0 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is enabled. 1 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is masked. Receiver Overflow Mask (RO)--R/WO. 17 0 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is enabled. 1 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is masked. Unexpected Completion Mask (UC)--R/WO. 16 0 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is enabled. 1 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is masked. Completion Abort Mask (CA)--R/WO. 15 0 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is enabled. 1 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is masked. Completion Timeout Mask (CT)--R/WO. 14 13 0 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is enabled. 1 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is masked. Flow Control Protocol Error Mask (FCPE)--RO. Flow Control Protocol Errors not supported. Poisoned TLP Mask (PT)--R/WO. 12 11:5 810 0 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is enabled. 1 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is masked. Reserved Datasheet PCI Express* Configuration Registers Bit Description Data Link Protocol Error Mask (DLPE)--R/WO. 4 3:1 0 19.1.55 0 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is enabled. 1 = The corresponding error in the UES register (D28:F0/F1/F2/F3/F4/F5/F6/F7:144) is masked. Reserved Training Error Mask (TE)--RO. Training Errors not supported UEV--Uncorrectable Error Severity (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 10Ch-10Fh Default Value: 00060011h Bit 31:21 Attribute: Size: RO, R/W 32 bits Description Reserved Unsupported Request Error Severity (URE)--R/W. 20 0 = Error considered non-fatal. (Default) 1 = Error is fatal. 19 ECRC Error Severity (EE)--RO. ECRC is not supported. Malformed TLP Severity (MT)--R/W. 18 0 = Error considered non-fatal. 1 = Error is fatal. (Default) Receiver Overflow Severity (RO)--R/W. 17 0 = Error considered non-fatal. 1 = Error is fatal. (Default) 16 Reserved Completion Abort Severity (CA)--R/W. 15 0 = Error considered non-fatal. (Default) 1 = Error is fatal. 14 Reserved 13 Flow Control Protocol Error Severity (FCPE)--RO. Flow Control Protocol Errors not supported. Poisoned TLP Severity (PT)--R/W. 12 11:5 0 = Error considered non-fatal. (Default) 1 = Error is fatal. Reserved Data Link Protocol Error Severity (DLPE)--R/W. 4 3:1 0 Datasheet 0 = Error considered non-fatal. 1 = Error is fatal. (Default) Reserved Training Error Severity (TE)--R/W. TE is not supported. 811 PCI Express* Configuration Registers 19.1.56 CES--Correctable Error Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 110h-113h Default Value: 00000000h Bit 31:14 Attribute: Size: R/WC 32 bits Description Reserved Advisory Non-Fatal Error Status (ANFES)--R/WC. 13 0 = Advisory Non-Fatal Error did not occur. 1 = Advisory Non-Fatal Error did occur. 12 Replay Timer Timeout Status (RTT)--R/WC. Indicates the replay timer timed out. 11:9 8 7 Bad DLLP Status (BD)--R/WC. Indicates a bad DLLP was received. 6 Bad TLP Status (BT)--R/WC. Indicates a bad TLP was received. 5:1 0 19.1.57 Reserved Replay Number Rollover Status (RNR)--R/WC. Indicates the replay number rolled over. Reserved Receiver Error Status (RE)--R/WC. Indicates a receiver error occurred. CEM--Correctable Error Mask Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 114h-117h Default Value: 00002000h Attribute: Size: R/WO 32 bits When set, the corresponding error in the CES register is masked, and the logged error will cause no action. When cleared, the corresponding error is enabled. Bit 31:14 Description Reserved Advisory Non-Fatal Error Mask (ANFEM)--R/WO. 13 12 11:9 This register is set by default to enable compatibility with software that does not comprehend Role-Based Error Reporting. NOTE: The correctable error detected bit in device status register is set whenever the Advisory Non-Fatal error is detected, independent of this mask bit. Replay Timer Timeout Mask (RTT)--R/WO. Mask for replay timer timeout. Reserved 8 Replay Number Rollover Mask (RNR)--R/WO. Mask for replay number rollover. 7 Bad DLLP Mask (BD)--R/WO. Mask for bad DLLP reception. 6 Bad TLP Mask (BT)--R/WO. Mask for bad TLP reception. 5:1 0 812 0 = Does not mask Advisory Non-Fatal errors. 1 = Masks Advisory Non-Fatal errors from (a) signaling ERR_COR to the device control register and (b) updating the Uncorrectable Error Status register. Reserved Receiver Error Mask (RE)--R/WO. Mask for receiver errors. Datasheet PCI Express* Configuration Registers 19.1.58 AECC--Advanced Error Capabilities and Control Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 118h-11Bh Default Value: 00000000h Bit 31:9 RO 32 bits Description Reserved 8 ECRC Check Enable (ECE)--RO. ECRC is not supported. 7 ECRC Check Capable (ECC)--RO. ECRC is not supported. 6 ECRC Generation Enable (EGE)--RO. ECRC is not supported. 5 ECRC Generation Capable (EGC)--RO. ECRC is not supported. 4:0 19.1.59 Attribute: Size: First Error Pointer (FEP)--RO. Identifies the bit position of the last error reported in the Uncorrectable Error Status Register. RES--Root Error Status Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 130h-133h Default Value: 00000000h Attribute: Size: R/WC, RO 32 bits Bit Description 31:27 Advanced Error Interrupt Message Number (AEMN)--RO. There is only one error interrupt allocated. 26:7 Reserved 6 Fatal Error Messages Received (FEMR)--RO. Set when one or more Fatal Uncorrectable Error Messages have been received. 5 Non-Fatal Error Messages Received (NFEMR)--RO. Set when one or more NonFatal Uncorrectable error messages have been received 4 First Uncorrectable Fatal (FUF)--RO. Set when the first Uncorrectable Error message received is for a fatal error. 3 Multiple ERR_FATAL/NONFATAL Received (MENR)--RO. For the PCH, only one error will be captured. ERR_FATAL/NONFATAL Received (ENR)--R/WC. 2 1 0 = No error message received. 1 = Either a fatal or a non-fatal error message is received. Multiple ERR_COR Received (MCR)--RO. For the PCH, only one error will be captured. ERR_COR Received (CR)--R/WC. 0 Datasheet 0 = No error message received. 1 = A correctable error message is received. 813 PCI Express* Configuration Registers 19.1.60 PECR2--PCI Express* Configuration Register 2 (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 300-303h Default Value: 60005007h Bit 31:20 21 20:0 19.1.61 Attribute: Size: R/W 32 bits Description Reserved PECR2 Field 1--R/W. BIOS must set this bit to 1b. Reserved PEETM--PCI Express* Extended Test Mode Register (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 324h Default Value: See Description Bit 7:3 Attribute: Size: RO 8 bits Description Reserved Scrambler Bypass Mode (BAU)--R/W. 2 1:0 19.1.62 0 = Normal operation. Scrambler and descrambler are used. 1 = Bypasses the data scrambler in the transmit direction and the data de-scrambler in the receive direction. NOTE: This functionality intended for debug/testing only. NOTE: If bypassing scrambler with the PCH root port 1 in x4 configuration, each PCH root port must have this bit set. Reserved PEC1--PCI Express* Configuration Register 1 (PCI Express*--D28:F0/F1/F2/F3/F4/F5/F6/F7) Address Offset: 330 Default Value: 14000016h Bit 31:8 7:0 Attribute: Size: RO, R/W 32 bits Description Reserved PEC1 Field 1--R/W. BIOS must program this field to 40h. 814 Datasheet High Precision Event Timer Registers 20 High Precision Event Timer Registers The timer registers are memory-mapped in a non-indexed scheme. This allows the processor to directly access each register without having to use an index register. The timer register space is 1024 bytes. The registers are generally aligned on 64-bit boundaries to simplify implementation with IA64 processors. There are four possible memory address ranges beginning at 1) FED0_0000h, 2) FED0_1000h, 3) FED0_2000h, 4) FED0_3000h. The choice of address range will be selected by configuration bits in the High Precision Timer Configuration Register (Chipset Config Registers:Offset 3404h). Behavioral Rules: 1. Software must not attempt to read or write across register boundaries. For example, a 32-bit access should be to offset x0h, x4h, x8h, or xCh. 32-bit accesses should not be to 01h, 02h, 03h, 05h, 06h, 07h, 09h, 0Ah, 0Bh, 0Dh, 0Eh, or 0Fh. Any accesses to these offsets will result in an unexpected behavior, and may result in a master abort. However, these accesses should not result in system hangs. 64bit accesses can only be to x0h and must not cross 64-bit boundaries. 2. Software should not write to read-only registers. 3. Software should not expect any particular or consistent value when reading reserved registers or bits. 20.1 Memory Mapped Registers Table 20-1. Memory-Mapped Registers (Sheet 1 of 2) Datasheet Offset Mnemonic Register Default Type 000-007h GCAP_ID General Capabilities and Identification 0429B17F8 086A701h RO 008-00Fh -- -- -- 010-017h GEN_CONF 018-01Fh -- 020-027h GINTR_STA 028-0EFh -- 0F0-0F7h MAIN_CNT 0F8-0FFh -- 100-107h TIM0_CONF 108-10Fh TIM0_COMP 110-11Fh -- 120-127h TIM1_CONF 128-12Fh TIM1_COMP 130-13Fh -- Reserved General Configuration Reserved General Interrupt Status Reserved 00000000 00000000h R/W -- -- 00000000 R/WC, R/ W 00000000h -- -- N/A R/W -- -- Timer 0 Configuration and Capabilities N/A R/W, RO Timer 0 Comparator Value N/A R/W -- -- Timer 1 Configuration and Capabilities N/A R/W, RO Timer 1 Comparator Value N/A R/W -- -- Main Counter Value Reserved Reserved Reserved 815 High Precision Event Timer Registers Table 20-1. Memory-Mapped Registers (Sheet 2 of 2) Offset Mnemonic Register Default Type 140-147h TIM2_CONF Timer 2 Configuration and Capabilities N/A R/W, RO 148-14Fh TIM2_COMP Timer 2 Comparator Value N/A R/W 150-15Fh -- -- -- 160-167h TIM3_CONG Timer 3 Configuration and Capabilities N/A R/W, RO 168-16Fh TIM3_COMP Timer 3 Comparator Value N/A R/W 180-187h TIM4_CONG Timer 4 Configuration and Capabilities N/A R/W, RO 188-18Fh TIM4_COMP Timer 4 Comparator Value N/A R/W Reserved 190-19Fh -- -- -- 1A0-1A7h TIM5_CONG Reserved Timer 5 Configuration and Capabilities N/A R/W, RO 1A8-1AFh TIM5_COMP Timer 5 Comparator Value N/A R/W 1B0-1BFh -- -- -- 1C0-1C7h TIM6_CONG Timer 6 Configuration and Capabilities N/A R/W, RO 1C8-1CFh TIM6_COMP Timer 6 Comparator Value N/A R/W 1D0-1DFh -- -- -- 1E0-1E7h TIM7_CONG Timer 7 Configuration and Capabilities N/A R/W, RO 1E8-1EFh TIM7_COMP Timer 7 Comparator Value N/A R/W 1F0-19Fh -- Reserved -- -- 200-3FFh -- Reserved -- -- Reserved Reserved NOTES: 1. Reads to reserved registers or bits will return a value of 0. 2. Software must not attempt locks to the memory-mapped I/O ranges for High Precision Event Timers. If attempted, the lock is not honored, which means potential deadlock conditions may occur. 816 Datasheet High Precision Event Timer Registers 20.1.1 GCAP_ID--General Capabilities and Identification Register Address Offset: 00h Default Value: 0429B17F8086A701h Attribute: Size: RO 64 bits Bit Description 63:32 Main Counter Tick Period (COUNTER_CLK_PER_CAP)--RO. This field indicates the period at which the counter increments in femptoseconds (10^-15 seconds). This will return 0429B17F when read. This indicates a period of 69841279 fs (69.841279 ns). 31:16 Vendor ID Capability (VENDOR_ID_CAP)--RO. This is a 16-bit value assigned to Intel. 15 Legacy Replacement Rout Capable (LEG_RT_CAP)--RO. Hardwired to 1. Legacy Replacement Interrupt Rout option is supported. 14 Reserved. This bit returns 0 when read. 13 Counter Size Capability (COUNT_SIZE_CAP)--RO. Hardwired to 1. Counter is 64-bit wide. 12:8 Number of Timer Capability (NUM_TIM_CAP)--RO. This field indicates the number of timers in this block. 07h = Eight timers. 7:0 20.1.2 Revision Identification (REV_ID)--RO. This indicates which revision of the function is implemented. Default value will be 01h. GEN_CONF--General Configuration Register Address Offset: 010h Default Value: 00000000 00000000h Bit 63:2 Attribute: Size: R/W 64 bits Description Reserved. These bits return 0 when read. Legacy Replacement Rout (LEG_RT_CNF)--R/W. If the ENABLE_CNF bit and the LEG_RT_CNF bit are both set, then the interrupts will be routed as follows: * Timer 0 is routed to IRQ0 in 8259 or IRQ2 in the I/O APIC * Timer 1 is routed to IRQ8 in 8259 or IRQ8 in the I/O APIC * Timer 2-n is routed as per the routing in the timer n config registers. 1 * If the Legacy Replacement Rout bit is set, the individual routing bits for Timers 0 and 1 (APIC) will have no impact. * If the Legacy Replacement Rout bit is not set, the individual routing bits for each of the timers are used. * This bit will default to 0. BIOS can set it to 1 to enable the legacy replacement routing, or 0 to disable the legacy replacement routing. 0 Overall Enable (ENABLE_CNF)--R/W. This bit must be set to enable any of the timers to generate interrupts. If this bit is 0, then the main counter will halt (will not increment) and no interrupts will be caused by any of these timers. For level-triggered interrupts, if an interrupt is pending when the ENABLE_CNF bit is changed from 1 to 0, the interrupt status indications (in the various Txx_INT_STS bits) will not be cleared. Software must write to the Txx_INT_STS bits to clear the interrupts. NOTE: This bit will default to 0. BIOS can set it to 1 or 0. Datasheet 817 High Precision Event Timer Registers 20.1.3 GINTR_STA--General Interrupt Status Register Address Offset: 020h Default Value: 00000000 00000000h Attribute: Size: R/W, R/WC 64 bits . Bit 63:8 Description Reserved. These bits will return 0 when read. 7 Timer 7Interrupt Active (T07_INT_STS)--R/W. Same functionality as Timer 0. 6 Timer 6Interrupt Active (T06_INT_STS)--R/W. Same functionality as Timer 0. 5 Timer 5Interrupt Active (T05_INT_STS)--R/W. Same functionality as Timer 0. 4 Timer 4Interrupt Active (T04_INT_STS)--R/W. Same functionality as Timer 0. 3 Timer 3Interrupt Active (T03_INT_STS)--R/W. Same functionality as Timer 0. 2 Timer 2 Interrupt Active (T02_INT_STS)--R/W. Same functionality as Timer 0. 1 Timer 1 Interrupt Active (T01_INT_STS)--R/W. Same functionality as Timer 0. Timer 0 Interrupt Active (T00_INT_STS)--R/WC. The functionality of this bit depends on whether the edge or level-triggered mode is used for this timer. (default = 0) If set to level-triggered mode: 0 This bit will be set by hardware if the corresponding timer interrupt is active. Once the bit is set, it can be cleared by software writing a 1 to the same bit position. Writes of 0 to this bit will have no effect. If set to edge-triggered mode: This bit should be ignored by software. Software should always write 0 to this bit. NOTE: Defaults to 0. In edge triggered mode, this bit will always read as 0 and writes will have no effect. 20.1.4 MAIN_CNT--Main Counter Value Register Address Offset: 0F0h Default Value: N/A Attribute: Size: R/W 64 bits . Bit Description Counter Value (COUNTER_VAL[63:0])--R/W. Reads return the current value of the counter. Writes load the new value to the counter. 63:0 818 NOTES: 1. Writes to this register should only be done while the counter is halted. 2. Reads to this register return the current value of the main counter. 3. 32-bit counters will always return 0 for the upper 32-bits of this register. 4. If 32-bit software attempts to read a 64-bit counter, it should first halt the counter. Since this delays the interrupts for all of the timers, this should be done only if the consequences are understood. It is strongly recommended that 32-bit software only operate the timer in 32-bit mode. 5. Reads to this register are monotonic. No two consecutive reads return the same value. The second of two reads always returns a larger value (unless the timer has rolled over to 0). Datasheet High Precision Event Timer Registers 20.1.5 TIMn_CONF--Timer n Configuration and Capabilities Register Address Offset: Timer Timer Timer Timer Timer Timer Timer Timer Default Value: N/A Note: 0: 1: 2: 3: 4: 5: 6: 7: 100-107h, 120-127h, 140-147h, 160-167h, 180-187h, 1A0-1A7h, 1C0-1C7h, 1E0-1E7h, Attribute: RO, R/W Size: 64 bit The letter n can be 0, 1, 2, 3, 4, 5, 6, or 7 referring to Timer 0, 1, 2, 3, 4, 5, 6, or 7. Bit 63:56 Description Reserved. These bits will return 0 when read. Timer Interrupt Rout Capability (TIMERn_INT_ROUT_CAP)--RO. Timer 0, 1: Bits 52, 53, 54, and 55 in this field (corresponding to IRQ 20, 21, 22, and 23) have a value of 1. Writes will have no effect. 55:52, 43 51:45, 42:14 Timer 2: Bits 43, 52, 53, 54, and 55 in this field (corresponding to IRQ 11, 20, 21, 22, and 23) have a value of 1. Writes will have no effect. Timer 3: Bits 44, 52, 53, 54, and 55 in this field (corresponding to IRQ 11, 20, 21, 22, and 23) have a value of 1. Writes will have no effect. Timer 4, 5, 6, 7: This field is always 0 as interrupts from these timers can only be delivered using direct FSB interrupt messages. NOTE: If IRQ 11 is used for HPET #2, software should ensure IRQ 11 is not shared with any other devices to ensure the proper operation of HPET #2. NOTE: If IRQ 12 is used for HPET #3, software should ensure IRQ 12 is not shared with any other devices to ensure the proper operation of HPET #3. Reserved. These bits return 0 when read. Interrupt Rout (TIMERn_INT_ROUT_CNF)--R/W. This 5-bit field indicates the routing for the interrupt to the 8259 or I/O (x) APIC. Software writes to this field to select which interrupt in the 8259 or I/O (x) will be used for this timer's interrupt. If the value is not supported by this particular timer, then the value read back will not match what is written. The software must only write valid values. 13:9 Datasheet Timer 4, 5, 6, 7: This field is Read-only and reads will return 0. NOTES: 1. If the interrupt is handled using the 8259, only interrupts 0-15 are applicable and valid. Software must not program any value other than 0-15 in this field. 2. If the Legacy Replacement Rout bit is set, then Timers 0 and 1 will have a different routing, and this bit field has no effect for those two timers. 3. Timer 0,1: Software is responsible to make sure it programs a valid value (20, 21, 22, or 23) for this field. The PCH logic does not check the validity of the value written. 4. Timer 2: Software is responsible to make sure it programs a valid value (11, 20, 21, 22, or 23) for this field. The PCH logic does not check the validity of the value written. 5. Timer 3: Software is responsible to make sure it programs a valid value (12, 20, 21, 22, or 23) for this field. The PCH logic does not check the validity of the value written. 819 High Precision Event Timer Registers Bit Description Timer n 32-bit Mode (TIMERn_32MODE_CNF)--R/W or RO. Software can set this bit to force a 64-bit timer to behave as a 32-bit timer. Timer 0: Bit is read/write (default to 0). 0 = 64 bit; 1 = 32 bit Timers 1, 2, 3, 4, 5, 6, 7: 8 Hardwired to 0. Writes have no effect (since these two timers are 32-bits). NOTE: When this bit is set to 1, the hardware counter will do a 32-bit operation on comparator match and rollovers; thus, the upper 32-bit of the Timer 0 Comparator Value register is ignored. The upper 32-bit of the main counter is not involved in any rollover from lower 32-bit of the main counter and becomes all zeros. 7 Reserved. This bit returns 0 when read. Timer n Value Set (TIMERn_VAL_SET_CNF)--R/W. Software uses this bit only for Timer 0 if it has been set to periodic mode. By writing this bit to a 1, the software is then allowed to directly set the timer's accumulator. Software does not have to write this bit back to 1 (it automatically clears). 6 Software should not write a 1 to this bit position if the timer is set to non-periodic mode. NOTE: This bit will return 0 when read. Writes will only have an effect for Timer 0 if it is set to periodic mode. Writes will have no effect for Timers 1, 2, 3, 4, 5, 6, 7. 5 Timer n Size (TIMERn_SIZE_CAP)--RO. This read only field indicates the size of the timer. Timer 0: Value is 1 (64-bits). Timers 1, 2, 3, 4, 5, 6, 7.: Value is 0 (32-bits). 4 Periodic Interrupt Capable (TIMERn_PER_INT_CAP)--RO. If this bit is 1, the hardware supports a periodic mode for this timer's interrupt. Timer 0: Hardwired to 1 (supports the periodic interrupt). Timers 1, 2, 3, 4, 5, 6, 7.: Hardwired to 0 (does not support periodic interrupt). Timer n Type (TIMERn_TYPE_CNF)--R/W or RO. 3 Timer 0: Bit is read/write. 0 = Disable timer to generate periodic interrupt; 1 = Enable timer to generate a periodic interrupt. Timers 1, 2, 3, 4, 5, 6, 7.: Hardwired to 0. Writes have no affect. Timer n Interrupt Enable (TIMERn_INT_ENB_CNF)--R/W. This bit must be set to enable timer n to cause an interrupt when it times out. 2 0 = Disable (Default). The timer can still count and generate appropriate status bits, but will not cause an interrupt. 1 = Enable. Timer Interrupt Type (TIMERn_INT_TYPE_CNF)--R/W. 1 0 = The timer interrupt is edge triggered. This means that an edge-type interrupt is generated. If another interrupt occurs, another edge will be generated. 1 = The timer interrupt is level triggered. This means that a level-triggered interrupt is generated. The interrupt will be held active until it is cleared by writing to the bit in the General Interrupt Status Register. If another interrupt occurs before the interrupt is cleared, the interrupt will remain active. Timer 4, 5, 6, 7: This bit is Read-Only, and will return 0 when read 0 Reserved. These bits will return 0 when read. NOTE: Reads or writes to unimplemented timers should not be attempted. Read from any unimplemented registers will return an undetermined value. 820 Datasheet High Precision Event Timer Registers 20.1.6 TIMn_COMP--Timer n Comparator Value Register Address Offset: Timer Timer Timer Timer Timer Timer Timer Timer Attribute: Default Value: Bit R/W N/A 0: 1: 2: 3: 4: 5: 6: 7: 108h-10Fh, 128h-12Fh, 148h-14Fh, 168h-16Fh, 188h - 18Fh, 1A8h - 1AFh, 1C8h - 1CFh, 1E8h - 1EFh Size: 64 bit Description Timer Compare Value--R/W. Reads to this register return the current value of the comparator Timers 0, 1, 2, 3 4, 5, 6, 7 (4, 5, 6, 7) are configured to non-periodic mode: Writes to this register load the value against which the main counter should be compared for this timer. * When the main counter equals the value last written to this register, the corresponding interrupt can be generated (if so enabled). * The value in this register does not change based on the interrupt being generated. Timer 0 is configured to periodic mode: * When the main counter equals the value last written to this register, the corresponding interrupt can be generated (if so enabled). * After the main counter equals the value in this register, the value in this register is increased by the value last written to the register. 63:0 For example, if the value written to the register is 00000123h, then 1. 2. 3. 4. An interrupt will be generated when the main counter reaches 00000123h. The value in this register will then be adjusted by the hardware to 00000246h. Another interrupt will be generated when the main counter reaches 00000246h The value in this register will then be adjusted by the hardware to 00000369h * As each periodic interrupt occurs, the value in this register will increment. When the incremented value is greater than the maximum value possible for this register (FFFFFFFFh for a 32-bit timer or FFFFFFFFFFFFFFFFh for a 64-bit timer), the value will wrap around through 0. For example, if the current value in a 32-bit timer is FFFF0000h and the last value written to this register is 20000, then after the next interrupt the value will change to 00010000h Default value for each timer is all 1s for the bits that are implemented. For example, a 32-bit timer has a default value of 00000000FFFFFFFFh. A 64-bit timer has a default value of FFFFFFFFFFFFFFFFh. Datasheet 821 High Precision Event Timer Registers 822 Datasheet Serial Peripheral Interface (SPI) 21 Serial Peripheral Interface (SPI) The Serial Peripheral Interface resides in memory mapped space. This function contains registers that allow for the setup and programming of devices that reside on the SPI interface. Note: All registers in this function (including memory-mapped registers) must be addressable in byte, word, and DWord quantities. The software must always make register accesses on natural boundaries (that is, DWord accesses must be on DWord boundaries; word accesses on word boundaries, etc.) In addition, the memory-mapped register space must not be accessed with the LOCK semantic exclusive-access mechanism. If software attempts exclusive-access mechanisms to the SPI memory-mapped space, the results are undefined. 21.1 Serial Peripheral Interface Memory Mapped Configuration Registers The SPI Host Interface registers are memory-mapped in the RCRB (Root Complex Register Block) Chipset Register Space with a base address (SPIBAR) of 3800h and are located within the range of 3800h to 39FFh. The address for RCRB can be found in RCBA Register see Section 13.1.38. The individual registers are then accessible at SPIBAR + Offset as indicated in the following table. These memory mapped registers must be accessed in byte, word, or DWord quantities. Table 21-1. Serial Peripheral Interface (SPI) Register Address Map (SPI Memory Mapped Configuration Registers) (Sheet 1 of 2) SPIBAR + Offset Datasheet Mnemonic Register Name BIOS Flash Primary Region Default 00h-03h BFPR 04h-05h HSFSTS Hardware Sequencing Flash Status 00000000h 0000h 06h-07h HSFCTL Hardware Sequencing Flash Control 0000h 08h-0Bh FADDR Flash Address 0Ch-0Fh Reserved Reserved 00000000h 10h-13h FDATA0 Flash Data 0 00000000h 14h-4Fh FDATAN Flash Data N 00000000h 50h-53h FRACC Flash Region Access Permissions 00000202h 00000000h 54h-57h FREG0 Flash Region 0 00000000h 58h-5Bh FREG1 Flash Region 1 00000000h 5Ch-5F FREG2 Flash Region 2 00000000h 60h-63h FREG3 Flash Region 3 00000000h 64h-67h FREG3 Flash Region 4 00000000h 67h-73h Reserved 74h-77h FPR0 Reserved for Future Flash Regions Flash Protected Range 0 00000000h 823 Serial Peripheral Interface (SPI) Table 21-1. Serial Peripheral Interface (SPI) Register Address Map (SPI Memory Mapped Configuration Registers) (Sheet 2 of 2) 21.1.1 SPIBAR + Offset Mnemonic 78h-7Bh FPR1 Flash Protected Range 1 00000000h 7Ch-7Fh FPR2 Flash Protected Range 2 00000000h 80-83h FPR3 Flash Protected Range 3 00000000h 84h-87h FPR4 Flash Protected Range 4 00000000h 88h-8Fh -- 90h SSFSTS Software Sequencing Flash Status 00h 91h-93h SSFCTL Software Sequencing Flash Control 0000h 94h-95h PREOP Prefix Opcode Configuration 0000h 96h-97h OPTYPE Opcode Type Configuration 0000h 98h-9Fh OPMENU Opcode Menu Configuration A0h BBAR BIOS Base Address Configuration 00000000h B0h-B3h FDOC Flash Descriptor Observability Control 00000000h B4h-B7h FDOD Flash Descriptor Observability Data 00000000h B8h-C3h -- C0h-C3h AFC C4-C7h Reserved -- 00000000 00000000h Reserved -- 00000000h LVSCC Host Lower Vendor Specific Component Capabilities 00000000h C8-C11h UVSCC Host Upper Vendor Specific Component Capabilities 00000000h D0-D3h FPB Flash Partition Boundary 00000000h BFPR -BIOS Flash Primary Region Register (SPI Memory Mapped Configuration Registers) SPIBAR + 00h 00000000h Attribute: Size: RO 32 bits This register is only applicable when SPI device is in descriptor mode. Bit 31:29 28:16 15:13 12:0 824 Default Additional Flash Control Memory Address: Default Value: Note: Register Name Description Reserved BIOS Flash Primary Region Limit (PRL)--RO. This specifies address bits 24:12 for the Primary Region Limit. The value in this register loaded from the contents in the Flash Descriptor.FLREG1.Region Limit Reserved BIOS Flash Primary Region Base (PRB)--RO. This specifies address bits 24:12 for the Primary Region Base The value in this register is loaded from the contents in the Flash Descriptor.FLREG1.Region Base Datasheet Serial Peripheral Interface (SPI) 21.1.2 HSFS--Hardware Sequencing Flash Status Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: SPIBAR + 04h 0000h Bit 15 Attribute: Size: RO, R/WC, R/W 16 bits Description Flash Configuration Lock-Down (FLOCKDN)--R/W/L. When set to 1, those Flash Program Registers that are locked down by this FLOCKDN bit cannot be written. Once set to 1, this bit can only be cleared by a hardware reset due to a global reset or host partition reset in an Intel(R) ME enabled system. Flash Descriptor Valid (FDV)--RO. This bit is set to a 1 if the Flash Controller read the correct Flash Descriptor Signature. 14 13 12:6 5 If the Flash Descriptor Valid bit is not 1, software cannot use the Hardware Sequencing registers, but must use the software sequencing registers. Any attempt to use the Hardware Sequencing registers will result in the FCERR bit being set. Flash Descriptor Override Pin Strap Status (FDOPSS)--RO. This bit reflects the value the Flash Descriptor Override Pin-Strap. 0 = The Flash Descriptor Override strap is set 1 = No override Reserved SPI Cycle In Progress (SCIP)--RO. Hardware sets this bit when software sets the Flash Cycle Go (FGO) bit in the Hardware Sequencing Flash Control register. This bit remains set until the cycle completes on the SPI interface. Hardware automatically sets and clears this bit so that software can determine when read data is valid and/or when it is safe to begin programming the next command. Software must only program the next command when this bit is 0. NOTE: This field is only applicable when in Descriptor mode and Hardware sequencing is being used. Block/Sector Erase Size (BERASE)--RO. This field identifies the erasable sector size for all Flash components. Valid Bit Settings: 00 = 256 Byte 01 = 4 K Byte 4:3 10 = 8 K Byte 11 = 64 K Byte If the FLA is less than FPBA then this field reflects the value in the LVSCC.LBES register. If the FLA is greater or equal to FPBA then this field reflects the value in the UVSCC.UBES register. NOTE: This field is only applicable when in Descriptor mode and Hardware sequencing is being used. 2 Datasheet Access Error Log (AEL)--R/W/C. Hardware sets this bit to a 1 when an attempt was made to access the BIOS region using the direct access method or an access to the BIOS Program Registers that violated the security restrictions. This bit is simply a log of an access security violation. This bit is cleared by software writing a 1. NOTE: This field is only applicable when in Descriptor mode and Hardware sequencing is being used. 825 Serial Peripheral Interface (SPI) 826 Bit Description 1 Flash Cycle Error (FCERR)--R/W/C. Hardware sets this bit to 1 when an program register access is blocked to the FLASH due to one of the protection policies or when any of the programmed cycle registers is written while a programmed access is already in progress. This bit remains asserted until cleared by software writing a 1 or until hardware reset occurs due to a global reset or host partition reset in an Intel(R) ME enabled system. Software must clear this bit before setting the FLASH Cycle GO bit in this register. NOTE: This field is only applicable when in Descriptor mode and Hardware sequencing is being used. 0 Flash Cycle Done (FDONE)--R/W/C. The PCH sets this bit to 1 when the SPI Cycle completes after software previously set the FGO bit. This bit remains asserted until cleared by software writing a 1 or hardware reset due to a global reset or host partition reset in an Intel(R) ME enabled system. When this bit is set and the SPI SMI# Enable bit is set, an internal signal is asserted to the SMI# generation block. Software must make sure this bit is cleared prior to enabling the SPI SMI# assertion for a new programmed access. NOTE: This field is only applicable when in Descriptor mode and Hardware sequencing is being used. Datasheet Serial Peripheral Interface (SPI) 21.1.3 HSFC--Hardware Sequencing Flash Control Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: SPIBAR + 06h 0000h Attribute: Size: R/W, R/WS 16 bits This register is only applicable when SPI device is in descriptor mode. Bit Description 15 Flash SPI SMI# Enable (FSMIE)--R/W. When set to 1, the SPI asserts an SMI# request whenever the Flash Cycle Done bit is 1. 14 Reserved 13:8 Flash Data Byte Count (FDBC)--R/W. This field specifies the number of bytes to shift in or out during the data portion of the SPI cycle. The contents of this register are 0s based with 0b representing 1 byte and 111111b representing 64 bytes. The number of bytes transferred is the value of this field plus 1. This field is ignored for the Block Erase command. 7:3 Reserved FLASH Cycle (FCYCLE)--R/W. This field defines the Flash SPI cycle type generated to the FLASH when the FGO bit is set as defined below: 2:1 00 = Read (1 up to 64 bytes by setting FDBC) 01 = Reserved 10 = Write (1 up to 64 bytes by setting FDBC) 11 = Block Erase Flash Cycle Go (FGO)--R/W/S. A write to this register with a 1 in this bit initiates a request to the Flash SPI Arbiter to start a cycle. This register is cleared by hardware when the cycle is granted by the SPI arbiter to run the cycle on the SPI bus. When the cycle is complete, the FDONE bit is set. 0 Software is forbidden to write to any register in the HSFLCTL register between the FGO bit getting set and the FDONE bit being cleared. Any attempt to violate this rule will be ignored by hardware. Hardware allows other bits in this register to be programmed for the same transaction when writing this bit to 1. This saves an additional memory write. This bit always returns 0 on reads. 21.1.4 FADDR--Flash Address Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Bit 31:25 24:0 SPIBAR + 08h 00000000h Attribute: Size: R/W 32 bits Description Reserved Flash Linear Address (FLA)--R/W. The FLA is the starting byte linear address of a SPI Read or Write cycle or an address within a Block for the Block Erase command. The Flash Linear Address must fall within a region for which BIOS has access permissions. Hardware must convert the FLA into a Flash Physical Address (FPA) before running this cycle on the SPI bus. Datasheet 827 Serial Peripheral Interface (SPI) 21.1.5 FDATA0--Flash Data 0 Register (SPI Memory Mapped Configuration Registers) Memory Address: SPIBAR + 10h Default Value: 00000000h Bit Attribute: Size: R/W 32 bits Description Flash Data 0 (FD0)--R/W. This field is shifted out as the SPI Data on the Master-Out Slave-In Data pin during the data portion of the SPI cycle. This register also shifts in the data from the Master-In Slave-Out pin into this register during the data portion of the SPI cycle. 31:0 The data is always shifted starting with the least significant byte, msb to lsb, followed by the next least significant byte, msb to lsb, etc. Specifically, the shift order on SPI in terms of bits within this register is: 7-6-5-4-3-2-1-0-15-14-13-...8-23-22-...16-31...24 Bit 24 is the last bit shifted out/in. There are no alignment assumptions; byte 0 always represents the value specified by the cycle address. Note that the data in this register may be modified by the hardware during any programmed SPI transaction. Direct Memory Reads do not modify the contents of this register. 21.1.6 FDATAN--Flash Data [N] Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: 828 SPIBAR + 14h SPIBAR + 18h SPIBAR + 1Ch SPIBAR + 20h SPIBAR + 24h SPIBAR + 28h SPIBAR + 2Ch SPIBAR + 30h SPIBAR + 34h SPIBAR + 38h SPIBAR + 3Ch SPIBAR + 40h SPIBAR + 44h SPIBAR + 48h SPIBAR + 4Ch 00000000h Attribute: R/W Size: 32 bits Bit Description 31:0 Flash Data N (FD[N])--R/W. Similar definition as Flash Data 0. However, this register does not begin shifting until FD[N-1] has completely shifted in/out.--R/W. Datasheet Serial Peripheral Interface (SPI) 21.1.7 FRAP--Flash Regions Access Permissions Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: SPIBAR + 50h 00000202h Attribute: Size: RO, R/W 32 bits This register is only applicable when SPI device is in descriptor mode. Bit 31:24 Description BIOS Master Write Access Grant (BMWAG)--R/W. Each bit [31:29] corresponds to Master[7:0]. BIOS can grant one or more masters write access to the BIOS region 1 overriding the permissions in the Flash Descriptor. Master[1] is Host processor/BIOS, Master[2] is Intel(R) Management Engine, Master[3] is Host processor/GbE. Master[0] and Master[7:4] are reserved. The contents of this register are locked by the FLOCKDN bit. 23:16 BIOS Master Read Access Grant (BMRAG)--R/W. Each bit [28:16] corresponds to Master[7:0]. BIOS can grant one or more masters read access to the BIOS region 1 overriding the read permissions in the Flash Descriptor. Master[1] is Host processor/BIOS, Master[2] is Intel(R) Management Engine, Master[3] is Host processor/GbE. Master[0] and Master[7:4] are reserved. The contents of this register are locked by the FLOCKDN bit BIOS Region Write Access (BRWA)--RO. Each bit [15:8] corresponds to Regions [7:0]. If the bit is set, this master can erase and write that particular region through register accesses. 15:8 The contents of this register are that of the Flash Descriptor. Flash Master 1 Master Region Write Access OR a particular master has granted BIOS write permissions in their Master Write Access Grant register or the Flash Descriptor Security Override strap is set. BIOS Region Read Access (BRRA)--RO. Each bit [7:0] corresponds to Regions [7:0]. If the bit is set, this master can read that particular region through register accesses. 7:0 Datasheet The contents of this register are that of the Flash Descriptor.Flash Master 1.Master Region Write Access OR a particular master has granted BIOS read permissions in their Master Read Access Grant register or the Flash Descriptor Security Override strap is set. 829 Serial Peripheral Interface (SPI) 21.1.8 FREG0--Flash Region 0 (Flash Descriptor) Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: SPIBAR + 54h 00000000h Attribute: Size: RO 32 bits This register is only applicable when SPI device is in descriptor mode. Bit 31:29 Description Reserved Region Limit (RL)--RO. This specifies address bits 24:12 for the Region 0 Limit. 28:16 The value in this register is loaded from the contents in the Flash Descriptor.FLREG0.Region Limit 15:13 Reserved 12:0 21.1.9 Region Base (RB) / Flash Descriptor Base Address Region (FDBAR)--RO. This specifies address bits 24:12 for the Region 0 Base The value in this register is loaded from the contents in the Flash Descriptor.FLREG0.Region Base FREG1--Flash Region 1 (BIOS Descriptor) Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: SPIBAR + 58h 00000000h Attribute: Size: RO 32 bits This register is only applicable when SPI device is in descriptor mode. Bit 31:29 Description Reserved Region Limit (RL)--RO. This specifies address bits 24:12 for the Region 1 Limit. 28:16 The value in this register is loaded from the contents in the Flash Descriptor.FLREG1.Region Limit 15:13 Reserved Region Base (RB)--RO. This specifies address bits 24:12 for the Region 1 Base 12:0 830 The value in this register is loaded from the contents in the Flash Descriptor.FLREG1.Region Base Datasheet Serial Peripheral Interface (SPI) 21.1.10 FREG2--Flash Region 2 (Intel(R) ME) Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: SPIBAR + 5Ch 00000000h Attribute: Size: RO 32 bits This register is only applicable when SPI device is in descriptor mode. Bit 31:29 Description Reserved Region Limit (RL)--RO. This specifies address bits 24:12 for the Region 2 Limit. 28:16 The value in this register is loaded from the contents in the Flash Descriptor.FLREG2.Region Limit 15:13 Reserved Region Base (RB)--RO. This specifies address bits 24:12 for the Region 2 Base 12:0 21.1.11 The value in this register is loaded from the contents in the Flash Descriptor.FLREG2.Region Base FREG3--Flash Region 3 (GbE) Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: SPIBAR + 60h 00000000h Attribute: Size: RO 32 bits This register is only applicable when SPI device is in descriptor mode. Bit 31:29 Description Reserved Region Limit (RL)--RO. This specifies address bits 24:12 for the Region 3 Limit. 28:16 The value in this register is loaded from the contents in the Flash Descriptor.FLREG3.Region Limit 15:13 Reserved Region Base (RB)--RO. This specifies address bits 24:12 for the Region 3 Base 12:0 Datasheet The value in this register is loaded from the contents in the Flash Descriptor.FLREG3.Region Base 831 Serial Peripheral Interface (SPI) 21.1.12 FREG4--Flash Region 4 (Platform Data) Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: SPIBAR + 64h 00000000h Attribute: Size: RO 32 bits This register is only applicable when SPI device is in descriptor mode. Bit 31:29 Description Reserved Region Limit (RL)--RO. This specifies address bits 24:12 for the Region 4 Limit. 28:16 The value in this register is loaded from the contents in the Flash Descriptor.FLREG4.Region Limit 15:13 Reserved Region Base (RB)--RO. This specifies address bits 24:12 for the Region 4 Base 12:0 21.1.13 The value in this register is loaded from the contents in the Flash Descriptor.FLREG4.Region Base PR0--Protected Range 0 Register (SPI Memory Mapped Configuration Registers) Memory Address: SPIBAR + 74h Default Value: 00000000h Note: R/W 32 bits This register can not be written when the FLOCKDN bit is set to 1. Bit Description 31 Write Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that writes and erases directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. 30:29 Reserved 28:16 Protected Range Limit--R/W. This field corresponds to FLA address bits 24:12 and specifies the upper limit of the protected range. Address bits 11:0 are assumed to be FFFh for the limit comparison. Any address greater than the value programmed in this field is unaffected by this protected range. 15 14:13 12:0 832 Attribute: Size: Read Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that read directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. Reserved Protected Range Base--R/W. This field corresponds to FLA address bits 24:12 and specifies the lower base of the protected range. Address bits 11:0 are assumed to be 000h for the base comparison. Any address less than the value programmed in this field is unaffected by this protected range. Datasheet Serial Peripheral Interface (SPI) 21.1.14 PR1--Protected Range 1 Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: Attribute: Size: R/W 32 bits This register can not be written when the FLOCKDN bit is set to 1. Bit Description 31 Write Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that writes and erases directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. 30:29 Reserved 28:16 Protected Range Limit--R/W. This field corresponds to FLA address bits 24:12 and specifies the upper limit of the protected range. Address bits 11:0 are assumed to be FFFh for the limit comparison. Any address greater than the value programmed in this field is unaffected by this protected range. 15 14:13 12:0 Datasheet SPIBAR + 78h 00000000h Read Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that read directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. Reserved Protected Range Base--R/W. This field corresponds to FLA address bits 24:12 and specifies the lower base of the protected range. Address bits 11:0 are assumed to be 000h for the base comparison. Any address less than the value programmed in this field is unaffected by this protected range. 833 Serial Peripheral Interface (SPI) 21.1.15 PR2--Protected Range 2 Register (SPI Memory Mapped Configuration Registers) Memory Address: SPIBAR + 7Ch Default Value: 00000000h Note: R/W 32 bits This register can not be written when the FLOCKDN bit is set to 1. Bit Description 31 Write Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that writes and erases directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. 30:29 Reserved 28:16 Protected Range Limit--R/W. This field corresponds to FLA address bits 24:12 and specifies the upper limit of the protected range. Address bits 11:0 are assumed to be FFFh for the limit comparison. Any address greater than the value programmed in this field is unaffected by this protected range. 15 14:13 12:0 834 Attribute: Size: Read Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that read directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. Reserved Protected Range Base--R/W. This field corresponds to FLA address bits 24:12 and specifies the lower base of the protected range. Address bits 11:0 are assumed to be 000h for the base comparison. Any address less than the value programmed in this field is unaffected by this protected range. Datasheet Serial Peripheral Interface (SPI) 21.1.16 PR3--Protected Range 3 Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: Attribute: Size: R/W 32 bits This register can not be written when the FLOCKDN bit is set to 1. Bit Description 31 Write Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that writes and erases directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. 30:29 Reserved 28:16 Protected Range Limit--R/W. This field corresponds to FLA address bits 24:12 and specifies the upper limit of the protected range. Address bits 11:0 are assumed to be FFFh for the limit comparison. Any address greater than the value programmed in this field is unaffected by this protected range. 15 14:13 12:0 Datasheet SPIBAR + 80h 00000000h Read Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that read directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. Reserved Protected Range Base--R/W. This field corresponds to FLA address bits 24:12 and specifies the lower base of the protected range. Address bits 11:0 are assumed to be 000h for the base comparison. Any address less than the value programmed in this field is unaffected by this protected range. 835 Serial Peripheral Interface (SPI) 21.1.17 PR4--Protected Range 4 Register (SPI Memory Mapped Configuration Registers) Memory Address: SPIBAR + 84h Default Value: 00000000h Note: R/W 32 bits This register can not be written when the FLOCKDN bit is set to 1. Bit Description 31 Write Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that writes and erases directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. 30:29 Reserved 28:16 Protected Range Limit--R/W. This field corresponds to FLA address bits 24:12 and specifies the upper limit of the protected range. Address bits 11:0 are assumed to be FFFh for the limit comparison. Any address greater than the value programmed in this field is unaffected by this protected range. 15 Read Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that read directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. 14:13 12:0 836 Attribute: Size: Reserved Protected Range Base--R/W. This field corresponds to FLA address bits 24:12 and specifies the lower base of the protected range. Address bits 11:0 are assumed to be 000h for the base comparison. Any address less than the value programmed in this field is unaffected by this protected range. Datasheet Serial Peripheral Interface (SPI) 21.1.18 SSFS--Software Sequencing Flash Status Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: Attribute: Size: RO, R/WC 8 bits The Software Sequencing control and status registers are reserved if the hardware sequencing control and status registers are used. Bit 7:5 Datasheet SPIBAR + 90h 00h Description Reserved 4 Access Error Log (AEL)--RO. This bit reflects the value of the Hardware Sequencing Status AEL register. 3 Flash Cycle Error (FCERR)--R/WC. Hardware sets this bit to 1 when a programmed access is blocked from running on the SPI interface due to one of the protection policies or when any of the programmed cycle registers is written while a programmed access is already in progress. This bit remains asserted until cleared by software writing a 1 or hardware reset due to a global reset or host partition reset in an Intel(R) ME enabled system. 2 Cycle Done Status--R/WC. The PCH sets this bit to 1 when the SPI Cycle completes (that is, SCIP bit is 0) after software sets the GO bit. This bit remains asserted until cleared by software writing a 1 or hardware reset due to a global reset or host partition reset in an Intel(R) ME enabled system. When this bit is set and the SPI SMI# Enable bit is set, an internal signal is asserted to the SMI# generation block. Software must make sure this bit is cleared prior to enabling the SPI SMI# assertion for a new programmed access. 1 Reserved 0 SPI Cycle In Progress (SCIP)--RO. Hardware sets this bit when software sets the SPI Cycle Go bit in the Command register. This bit remains set until the cycle completes on the SPI interface. Hardware automatically sets and clears this bit so that software can determine when read data is valid and/or when it is safe to begin programming the next command. Software must only program the next command when this bit is 0. 837 Serial Peripheral Interface (SPI) 21.1.19 SSFC--Software Sequencing Flash Control Register (SPI Memory Mapped Configuration Registers) Memory Address: SPIBAR + 91h Default Value: F80000h Bit 23:19 Attribute: Size: R/W 24 bits Description Reserved. BIOS must set this field to `11111'b SPI Cycle Frequency (SCF)--R/W. This register sets frequency to use for all SPI software sequencing cycles (write, erase, fast read, read status, etc.) except for the read cycle which always run at 20MHz. 18:16 000 = 20 MHz 001 = 33 MHz 100 = 50 MHz All other values reserved. This register is locked when the SPI Configuration Lock-Down bit is set. 15 SPI SMI# Enable (SME)--R/W. When set to 1, the SPI asserts an SMI# request whenever the Cycle Done Status bit is 1. 14 Data Cycle (DS)--R/W. When set to 1, there is data that corresponds to this transaction. When 0, no data is delivered for this cycle, and the DBC and data fields themselves are don't cares. 13:8 Data Byte Count (DBC)--R/W. This field specifies the number of bytes to shift in or out during the data portion of the SPI cycle. The valid settings (in decimal) are any value from 0 to 63. The number of bytes transferred is the value of this field plus 1. Note that when this field is 00_0000b, then there is 1 byte to transfer and that 11_1111b means there are 64 bytes to transfer. 7 Reserved 6:4 Cycle Opcode Pointer (COP)--R/W. This field selects one of the programmed opcodes in the Opcode Menu to be used as the SPI Command/Opcode. In the case of an Atomic Cycle Sequence, this determines the second command.--R/W. 3 Sequence Prefix Opcode Pointer (SPOP)--R/W. This field selects one of the two programmed prefix opcodes for use when performing an Atomic Cycle Sequence. A value of 0 points to the opcode in the least significant byte of the Prefix Opcodes register. By making this programmable, the PCH supports flash devices that have different opcodes for enabling writes to the data space vs. status register. Atomic Cycle Sequence (ACS)--R/W. When set to 1 along with the SCGO assertion, the PCH will execute a sequence of commands on the SPI interface without allowing the LAN component to arbitrate and interleave cycles. The sequence is composed of: 2 * Atomic Sequence Prefix Command (8-bit opcode only) * Primary Command specified below by software (can include address and data) * Polling the Flash Status Register (opcode 05h) until bit 0 becomes 0b. The SPI Cycle in Progress bit remains set and the Cycle Done Status bit remains unset until the Busy bit in the Flash Status Register returns 0. 1 SPI Cycle Go (SCGO)--R/WS. This bit always returns 0 on reads. However, a write to this register with a 1 in this bit starts the SPI cycle defined by the other bits of this register. The "SPI Cycle in Progress" (SCIP) bit gets set by this action. Hardware must ignore writes to this bit while the Cycle In Progress bit is set. Hardware allows other bits in this register to be programmed for the same transaction when writing this bit to 1. This saves an additional memory write. 0 838 Reserved Datasheet Serial Peripheral Interface (SPI) 21.1.20 PREOP--Prefix Opcode Configuration Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: SPIBAR + 94h 0000h Bit Attribute: Size: R/W 16 bits Description 15:8 Prefix Opcode 1--R/W. Software programs an SPI opcode into this field that is permitted to run as the first command in an atomic cycle sequence. 7:0 Prefix Opcode 0--R/W. Software programs an SPI opcode into this field that is permitted to run as the first command in an atomic cycle sequence. NOTE: This register is not writable when the Flash Configuration Lock-Down bit (SPIBAR + 04h:15) is set. 21.1.21 OPTYPE--Opcode Type Configuration Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: SPIBAR + 96h 0000h Attribute: Size: R/W 16 bits Entries in this register correspond to the entries in the Opcode Menu Configuration register. Note: The definition below only provides write protection for opcodes that have addresses associated with them. Therefore, any erase or write opcodes that do not use an address should be avoided (for example, "Chip Erase" and "Auto-Address Increment Byte Program") Bit 15:14 Description Opcode Type 7--R/W. See the description for bits 1:0 13:12 Opcode Type 6--R/W. See the description for bits 1:0 11:10 Opcode Type 5--R/W. See the description for bits 1:0 9:8 Opcode Type 4--R/W. See the description for bits 1:0 7:6 Opcode Type 3--R/W. See the description for bits 1:0 5:4 Opcode Type 2--R/W. See the description for bits 1:0 3:2 Opcode Type 1--R/W. See the description for bits 1:0 1:0 Opcode Type 0--R/W. This field specifies information about the corresponding Opcode 0. This information allows the hardware to 1) know whether to use the address field and 2) provide BIOS and Shared Flash protection capabilities. The encoding of the two bits is: 00 = No address associated with this Opcode; Read cycle type 01 = No address associated with this Opcode; Write cycle type 10 = Address required; Read cycle type 11 = Address required; Write cycle type NOTE: This register is not writable when the SPI Configuration Lock-Down bit (SPIBAR + 00h:15) is set. Datasheet 839 Serial Peripheral Interface (SPI) 21.1.22 OPMENU--Opcode Menu Configuration Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: SPIBAR + 98h 0000000000000000h Attribute: Size: R/W 64 bits Eight entries are available in this register to give BIOS a sufficient set of commands for communicating with the flash device, while also restricting what malicious software can do. This keeps the hardware flexible enough to operate with a wide variety of SPI devices. Note: It is recommended that BIOS avoid programming Write Enable opcodes in this menu. Malicious software could then perform writes and erases to the SPI flash without using the atomic cycle mechanism. This could cause functional failures in a shared flash environment. Write Enable opcodes should only be programmed in the Prefix Opcodes. Bit 63:56 Description Allowable Opcode 7--R/W. See the description for bits 7:0 55:48 Allowable Opcode 6--R/W. See the description for bits 7:0 47:40 Allowable Opcode 5--R/W. See the description for bits 7:0 39:32 Allowable Opcode 4--R/W. See the description for bits 7:0 31:24 Allowable Opcode 3--R/W. See the description for bits 7:0 23:16 Allowable Opcode 2--R/W. See the description for bits 7:0 15:8 Allowable Opcode 1--R/W. See the description for bits 7:0 7:0 Allowable Opcode 0--R/W. Software programs an SPI opcode into this field for use when initiating SPI commands through the Control Register. This register is not writable when the SPI Configuration Lock-Down bit (SPIBAR + 00h:15) is set. 840 Datasheet Serial Peripheral Interface (SPI) 21.1.23 BBAR--BIOS Base Address Configuration Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: SPIBAR + A0h 00000000h Attribute: Size: R/W, RO 32 bits Eight entries are available in this register to give BIOS a sufficient set of commands for communicating with the flash device, while also restricting what malicious software can do. This keeps the hardware flexible enough to operate with a wide variety of SPI devices. Bit 31:24 23:8 7:0 21.1.24 Description Reserved Bottom of System Flash--R/W. This field determines the bottom of the System BIOS. The PCH will not run programmed commands nor memory reads whose address field is less than this value. this field corresponds to bits 23:8 of the 3-byte address; bits 7:0 are assumed to be 00h for this vector when comparing to a potential SPI address. NOTE: The SPI host controller prevents any programmed cycle using the address register with an address less than the value in this register. Some flash devices specify that the Read ID command must have an address of 0000h or 0001h. If this command must be supported with these devices, it must be performed with the BIOS BAR Reserved FDOC--Flash Descriptor Observability Control Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: SPIBAR + B0h 00000000h Attribute: Size: R/W 32 bits This register that can be used to observe the contents of the Flash Descriptor that is stored in the PCH Flash Controller. This register is only applicable when SPI device is in descriptor mode. Bit 31:15 Description Reserved Flash Descriptor Section Select (FDSS)--R/W. Selects which section within the loaded Flash Descriptor to observe. 000 = Flash Signature and Descriptor Map 14:12 001 = Component 010 = Region 011 = Master 111 = Reserved 11:2 1:0 Datasheet Flash Descriptor Section Index (FDSI)--R/W. Selects the DW offset within the Flash Descriptor Section to observe. Reserved 841 Serial Peripheral Interface (SPI) 21.1.25 FDOD--Flash Descriptor Observability Data Register (SPI Memory Mapped Configuration Registers) Memory Address: SPIBAR + B4h Default Value: 00000000h Note: RO 32 bits This register that can be used to observe the contents of the Flash Descriptor that is stored in the PCH Flash Controller. Bit 31:0 21.1.26 Attribute: Size: Description Flash Descriptor Section Data (FDSD)--RO. Returns the DW of data to observe as selected in the Flash Descriptor Observability Control. AFC--Additional Flash Control Register (SPI Memory Mapped Configuration Registers) Memory Address: SPIBAR + C0h Default Value: 00000000h Bit 31:3 Attribute: Size: RO, R/W 32 bits. Description Reserved Flash Controller Interface Dynamic Clock Gating Enable--R/W. 2:1 0 = Flash Controller Interface Dynamic Clock Gating is Disabled 1 = Flash Controller Interface Dynamic Clock Gating is Enabled Other configurations are Reserved. Flash Controller Core Dynamic Clock Gating Enable--R/W. 0 21.1.27 0 = Flash Controller Core Dynamic Clock Gating is Disabled 1 = Flash Controller Core Dynamic Clock Gating is Enabled LVSCC--Host Lower Vendor Specific Component Capabilities Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: SPIBAR + C4h 00000000h Attribute: Size: RO, RWL 32 bits All attributes described in LVSCC must apply to all flash space below the FPBA, even if it spans between two separate flash parts. This register is only applicable when SPI device is in descriptor mode. Bit 31:24 Description Reserved Vendor Component Lock (LVCL)--RW. This register locks itself when set. 23 0 = The lock bit is not set 1 = The Vendor Component Lock bit is set. NOTE: This bit applies to both UVSCC and LVSCC registers. 22:16 Reserved 15:8 Lower Erase Opcode (LEO)--RW. This register is programmed with the Flash erase instruction opcode required by the vendor's Flash component. This register is locked by the Vendor Component Lock (LVCL) bit. 7:5 842 Reserved Datasheet Serial Peripheral Interface (SPI) Bit Description Write Enable on Write Status (LWEWS)--RW. This register is locked by the Vendor Component Lock (LVCL) bit. 0 = No automatic write of 00h will be made to the SPI flash's status register) 1 = A write of 00h to the SPI flash's status register will be sent on EVERY write and erase to the SPI flash. 06h 01h 00h is the opcode sequence used to unlock the Status register. 4 NOTES: 1. This bit should not be set to 1 if there are non-volatile bits in the SPI flash's status register. This may lead to premature flash wear out. 2. This is not an atomic sequence. If the SPI component's status register is nonvolatile, then BIOS should issue an atomic software sequence cycle to unlock the flash part. 3. Bit 3 and bit 4 should NOT be both set to 1. Lower Write Status Required (LWSR)--RW. This register is locked by the Vendor Component Lock (LVCL) bit. 0 = No automatic write of 00h will be made to the SPI flash's status register) 1 = A write of 00h to the SPI flash's status register will be sent on EVERY write and erase to the SPI flash. 50h 01h 00h is the opcode sequence used to unlock the Status register. 3 NOTES: 1. This bit should not be set to 1 if there are non volatile bits in the SPI flash's status register. This may lead to premature flash wear out. 2. This is not an atomic sequence. If the SPI component's status register is nonvolatile, then BIOS should issue an atomic software sequence cycle to unlock the flash part. 3. Bit 3 and bit 4 should NOT be both set to 1. Lower Write Granularity (LWG)--RW. This register is locked by the Vendor Component Lock (LVCL) bit. 0 = 1 Byte 1 = 64 Byte 2 NOTES: 1. If more than one Flash component exists, this field must be set to the lowest common write granularity of the different Flash components. 2. If using 64 B write, BIOS must ensure that multiple byte writes do not occur over 256 B boundaries. This will lead to corruption as the write will wrap around the page boundary on the SPI flash part. This is a a feature page writable SPI flash. Lower Block/Sector Erase Size (LBES)--RW. This field identifies the erasable sector size for all Flash components. 1:0 00 01 10 11 = = = = 256 Byte 4 KB 8 KB 64 KB This register is locked by the Vendor Component Lock (LVCL) bit. Hardware takes no action based on the value of this register. The contents of this register are to be used only by software and can be read in the HSFSTS.BERASE register in both the BIOS and the GbE program registers if FLA is less than FPBA. Datasheet 843 Serial Peripheral Interface (SPI) 21.1.28 UVSCC--Host Upper Vendor Specific Component Capabilities Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: SPIBAR + C8h 00000000h Attribute: Size: RO, RWL 32 bits Note: All attributes described in UVSCC must apply to all flash space equal to or above the FPBA, even if it spans between two separate flash parts. This register is only applicable when SPI device is in descriptor mode. Note: To prevent this register from being modified you must use LVSCC.VCL bit. Bit 31:16 15:8 Description Reserved Upper Erase Opcode (UEO)--RW. This register is programmed with the Flash erase instruction opcode required by the vendor's Flash component. This register is locked by the Vendor Component Lock (UVCL) bit. 7:5 Reserved Write Enable on Write Status (UWEWS)--RW. This register is locked by the Vendor Component Lock (UVCL) bit. 0 = No automatic write of 00h will be made to the SPI flash's status register) 1 = A write of 00h to the SPI flash's status register will be sent on EVERY write and erase to the SPI flash. 06h 01h 00h is the opcode sequence used to unlock the Status register. 4 NOTES: 1. This bit should not be set to 1 if there are non volatile bits in the SPI flash's status register. This may lead to premature flash wear out. 2. This is not an atomic sequence. If the SPI component's status register is nonvolatile, then BIOS should issue an atomic software sequence cycle to unlock the flash part. 3. Bit 3 and bit 4 should NOT be both set to 1. Upper Write Status Required (UWSR)--RW. This register is locked by the Vendor Component Lock (UVCL) bit. 0 = No automatic write of 00h will be made to the SPI flash's status register) 1 = A write of 00h to the SPI flash's status register will be sent on EVERY write and erase to the SPI flash. 50h 01h 00h is the opcode sequence used to unlock the Status register. 3 844 NOTES: 1. This bit should not be set to `1' if there are non volatile bits in the SPI flash's status register. This may lead to premature flash wear out. 2. This is not an atomic sequence. If the SPI component's status register is nonvolatile, then BIOS should issue an atomic software sequence cycle to unlock the flash part. 3. Bit 3 and bit 4 should NOT be both set to 1. Datasheet Serial Peripheral Interface (SPI) Bit Description Upper Write Granularity (UWG)--RW. This register is locked by the Vendor Component Lock (UVCL) bit. 0 = 1 Byte 1 = 64 Byte 2 NOTES: 1. If more than one Flash component exists, this field must be set to the lowest common write granularity of the different Flash components. 2. If using 64 B write, BIOS must ensure that multiple byte writes do not occur over 256 B boundaries. This will lead to corruption as the write will wrap around the page boundary on the SPI flash part. This is a a feature page writable SPI flash. Upper Block/Sector Erase Size (UBES)--RW. This field identifies the erasable sector size for all Flash components. Valid Bit Settings: 00 = 256 Byte 01 = 4 KB 1:0 10 = 8 KB 11 = 64 KB This register is locked by the Vendor Component Lock (UVCL) bit. Hardware takes no action based on the value of this register. The contents of this register are to be used only by software and can be read in the HSFSTS.BERASE register in both the BIOS and the GbE program registers if FLA is greater or equal to FPBA. 21.1.29 FPB--Flash Partition Boundary Register (SPI Memory Mapped Configuration Registers) Memory Address: Default Value: Note: Attribute: Size: RO 32 bits This register is only applicable when SPI device is in descriptor mode. Bit 31:13 12:0 21.2 SPIBAR + D0h 00000000h Description Reserved Flash Partition Boundary Address (FPBA)--RO. This register reflects the value of Flash Descriptor Component FPBA field. Flash Descriptor Records The following sections describe the data structure of the Flash Descriptor on the SPI device. These are not registers within the PCH. Datasheet 845 Serial Peripheral Interface (SPI) 21.3 OEM Section Memory Address: F00h Default Value: Size: 256 Bytes 256 Bytes are reserved at the top of the Flash Descriptor for use by the OEM. The information stored by the OEM can only be written during the manufacturing process as the Flash Descriptor read/write permissions must be set to Read Only when the computer leaves the manufacturing floor. The PCH Flash controller does not read this information. FFh is suggested to reduce programming time. 21.4 GbE SPI Flash Program Registers The GbE Flash registers are memory-mapped with a base address MBARB found in the GbE LAN register chapter Device 25: Function 0: Offset 14h. The individual registers are then accessible at MBARB + Offset as indicated in the following table. These memory mapped registers must be accessed in byte, word, or DWord quantities. Note: These register are only applicable when SPI flash is used in descriptor mode. Table 21-2. Gigabit LAN SPI Flash Program Register Address Map (GbE LAN Memory Mapped Configuration Registers) MBARB + Offset 846 Mnemonic 00h-03h GLFPR 04h-05h HSFSTS Register Name Gigabit LAN Flash Primary Region Hardware Sequencing Flash Status Default Access 00000000h 0000h 06h-07h HSFCTL Hardware Sequencing Flash Control 08h-0Bh FADDR Flash Address 00000000h 0000h 0Ch-0Fh Reserved Reserved 00000000h 10h-13h FDATA0 Flash Data 0 00000000h 14h-4Fh Reserved 50h-53h FRACC Reserved 00000000h Flash Region Access Permissions 00000000h 54h-57h FREG0 Flash Region 0 00000000h 58h-5Bh FREG1 Flash Region 1 00000000h 5Ch-5F FREG2 Flash Region 2 00000000h 60h-63h FREG3 Flash Region 3 00000000h 64h-73h Reserved 74h-77h FPR0 Reserved for Future Flash Regions Flash Protected Range 0 Flash Protected Range 1 00000000h 78h-7Bh FPR1 7Ch-8Fh Reserved 00000000h 90h SSFSTS Software Sequencing Flash Status 00h 91h-93h SSFCTL Software Sequencing Flash Control 000000h 94h-95h PREOP Prefix Opcode Configuration 0000h 96h-97h OPTYPE Opcode Type Configuration 0000h 98h-9Fh OPMENU Opcode Menu Configuration 00000000 00000000h A0h-DFh Reserved Reserved Reserved Datasheet Serial Peripheral Interface (SPI) 21.4.1 GLFPR -Gigabit LAN Flash Primary Region Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: Default Value: MBARB + 00h 00000000h Bit 31:29 28:16 15:13 12:0 21.4.2 Attribute: Size: RO 32 bits Description Reserved GbE Flash Primary Region Limit (PRL)--RO. This specifies address bits 24:12 for the Primary Region Limit. The value in this register loaded from the contents in the Flash Descriptor.FLREG3.Region Limit Reserved GbE Flash Primary Region Base (PRB)--RO. This specifies address bits 24:12 for the Primary Region Base The value in this register is loaded from the contents in the Flash Descriptor.FLREG3.Region Base HSFS--Hardware Sequencing Flash Status Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: Default Value: Bit 15 MBARB + 04h 0000h Attribute: Size: RO, R/WC, R/W 16 bits Description Flash Configuration Lock-Down (FLOCKDN)--R/W. When set to 1, those Flash Program Registers that are locked down by this FLOCKDN bit cannot be written. Once set to 1, this bit can only be cleared by a hardware reset due to a global reset or host partition reset in an Intel(R) ME enabled system. Flash Descriptor Valid (FDV)--RO. This bit is set to a 1 if the Flash Controller read the correct Flash Descriptor Signature. 14 13 12:6 5 Datasheet If the Flash Descriptor Valid bit is not 1, software cannot use the Hardware Sequencing registers, but must use the software sequencing registers. Any attempt to use the Hardware Sequencing registers will result in the FCERR bit being set. Flash Descriptor Override Pin Strap Status (FDOPSS)--RO. This bit reflects the value the Flash Descriptor Override Pin-Strap. 0 = The Flash Descriptor Override strap is set 1 = No override Reserved SPI Cycle In Progress (SCIP)--RO. Hardware sets this bit when software sets the Flash Cycle Go (FGO) bit in the Hardware Sequencing Flash Control register. This bit remains set until the cycle completes on the SPI interface. Hardware automatically sets and clears this bit so that software can determine when read data is valid and/or when it is safe to begin programming the next command. Software must only program the next command when this bit is 0. 847 Serial Peripheral Interface (SPI) Bit Description Block/Sector Erase Size (BERASE)--RO. This field identifies the erasable sector size for all Flash components. 00 = 256 Byte 01 = 4 K Byte 4:3 10 = 8 K Byte 11 = 64 K Byte If the Flash Linear Address is less than FPBA then this field reflects the value in the LVSCC.LBES register. If the Flash Linear Address is greater or equal to FPBA then this field reflects the value in the UVSCC.UBES register. 848 2 Access Error Log (AEL)--R/W/C. Hardware sets this bit to a 1 when an attempt was made to access the BIOS region using the direct access method or an access to the BIOS Program Registers that violated the security restrictions. This bit is simply a log of an access security violation. This bit is cleared by software writing a 1. 1 Flash Cycle Error (FCERR)--R/W/C. Hardware sets this bit to 1 when an program register access is blocked to the FLASH due to one of the protection policies or when any of the programmed cycle registers is written while a programmed access is already in progress. This bit remains asserted until cleared by software writing a 1 or until hardware reset occurs due to a global reset or host partition reset in an Intel(R) ME enabled system. Software must clear this bit before setting the FLASH Cycle GO bit in this register. 0 Flash Cycle Done (FDONE)--R/W/C. The PCH sets this bit to 1 when the SPI Cycle completes after software previously set the FGO bit. This bit remains asserted until cleared by software writing a 1 or hardware reset due to a global reset or host partition reset in an Intel(R) ME enabled system. When this bit is set and the SPI SMI# Enable bit is set, an internal signal is asserted to the SMI# generation block. Software must make sure this bit is cleared prior to enabling the SPI SMI# assertion for a new programmed access. Datasheet Serial Peripheral Interface (SPI) 21.4.3 HSFC--Hardware Sequencing Flash Control Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: Default Value: MBARB + 06h 0000h Bit 15:10 9:8 Attribute: Size: R/W, R/WS 16 bits Description Reserved Flash Data Byte Count (FDBC)--R/W. This field specifies the number of bytes to shift in or out during the data portion of the SPI cycle. The contents of this register are 0s based with 0b representing 1 byte and 11b representing 4 bytes. The number of bytes transferred is the value of this field plus 1. This field is ignored for the Block Erase command. 7:3 Reserved FLASH Cycle (FCYCLE)--R/W. This field defines the Flash SPI cycle type generated to the FLASH when the FGO bit is set as defined below: 2:1 00 = Read (1 up to 4 bytes by setting FDBC) 01 = Reserved 10 = Write (1 up to 4 bytes by setting FDBC) 11 = Block Erase Flash Cycle Go (FGO)--R/W/S. A write to this register with a 1 in this bit initiates a request to the Flash SPI Arbiter to start a cycle. This register is cleared by hardware when the cycle is granted by the SPI arbiter to run the cycle on the SPI bus. When the cycle is complete, the FDONE bit is set. 0 Software is forbidden to write to any register in the HSFLCTL register between the FGO bit getting set and the FDONE bit being cleared. Any attempt to violate this rule will be ignored by hardware. Hardware allows other bits in this register to be programmed for the same transaction when writing this bit to 1. This saves an additional memory write. This bit always returns 0 on reads. Datasheet 849 Serial Peripheral Interface (SPI) 21.4.4 FADDR--Flash Address Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: MBARB + 08h Default Value: 00000000h Bit 31:25 24:0 21.4.5 Attribute: Size: R/W 32 bits Description Reserved Flash Linear Address (FLA)--R/W. The FLA is the starting byte linear address of a SPI Read or Write cycle or an address within a Block for the Block Erase command. The Flash Linear Address must fall within a region for which BIOS has access permissions. FDATA0--Flash Data 0 Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: MBARB + 10h Default Value: 00000000h Bit Attribute: Size: R/W 32 bits Description Flash Data 0 (FD0)--R/W. This field is shifted out as the SPI Data on the Master-Out Slave-In Data pin during the data portion of the SPI cycle. This register also shifts in the data from the Master-In Slave-Out pin into this register during the data portion of the SPI cycle. 31:0 The data is always shifted starting with the least significant byte, msb to lsb, followed by the next least significant byte, msb to lsb, etc. Specifically, the shift order on SPI in terms of bits within this register is: 7-6-5-4-3-2-1-0-15-14-13-...8-23-22-...16-31...24 Bit 24 is the last bit shifted out/in. There are no alignment assumptions; byte 0 always represents the value specified by the cycle address. Note that the data in this register may be modified by the hardware during any programmed SPI transaction. Direct Memory Reads do not modify the contents of this register. 850 Datasheet Serial Peripheral Interface (SPI) 21.4.6 FRAP--Flash Regions Access Permissions Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: Default Value: Bit 31:28 27:25 MBARB + 50h 00000808h Attribute: Size: RO, R/W 32 bits Description Reserved GbE Master Write Access Grant (GMWAG)--R/W. Each bit 27:25 corresponds to Master[3:1]. GbE can grant one or more masters write access to the GbE region 3 overriding the permissions in the Flash Descriptor. Master[1] is Host CPU/BIOS, Master[2] is Intel(R) Management Engine, Master[3] is Host processor/GbE. The contents of this register are locked by the FLOCKDN bit. 24:20 19:17 Reserved GbE Master Read Access Grant (GMRAG)--R/W. Each bit 19:17 corresponds to Master[3:1]. GbE can grant one or more masters read access to the GbE region 3 overriding the read permissions in the Flash Descriptor. Master[1] is Host processor/BIOS, Master[2] is Intel(R) Management Engine, Master[3] is GbE. The contents of this register are locked by the FLOCKDN bit 16:12 Reserved GbE Region Write Access (GRWA)--RO. Each bit 11:8 corresponds to Regions 3:0. If the bit is set, this master can erase and write that particular region through register accesses. 11:8 7:4 The contents of this register are that of the Flash Descriptor. Flash Master 3.Master Region Write Access OR a particular master has granted GbE write permissions in their Master Write Access Grant register OR the Flash Descriptor Security Override strap is set. Reserved GbE Region Read Access (GRRA)--RO. Each bit 3:0 corresponds to Regions 3:0. If the bit is set, this master can read that particular region through register accesses. 3:0 Datasheet The contents of this register are that of the Flash Descriptor. Flash Master 3.Master Region Write Access OR a particular master has granted GbE read permissions in their Master Read Access Grant register. 851 Serial Peripheral Interface (SPI) 21.4.7 FREG0--Flash Region 0 (Flash Descriptor) Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: MBARB + 54h Default Value: 00000000h Bit 31:29 Attribute: Size: RO 32 bits Description Reserved Region Limit (RL)--RO. This specifies address bits 24:12 for the Region 0 Limit. 28:16 The value in this register is loaded from the contents in the Flash Descriptor.FLREG0.Region Limit 15:13 Reserved Region Base (RB)--RO. This specifies address bits 24:12 for the Region 0 Base 12:0 21.4.8 The value in this register is loaded from the contents in the Flash Descriptor.FLREG0.Region Base FREG1--Flash Region 1 (BIOS Descriptor) Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: MBARB + 58h Default Value: 00000000h Bit 31:29 Attribute: Size: RO 32 bits Description Reserved Region Limit (RL)--RO. This specifies address bits 24:12 for the Region 1 Limit. 28:16 The value in this register is loaded from the contents in the Flash Descriptor.FLREG1.Region Limit. 15:13 Reserved Region Base (RB)--RO. This specifies address bits 24:12 for the Region 1 Base 12:0 21.4.9 The value in this register is loaded from the contents in the Flash Descriptor.FLREG1.Region Base. FREG2--Flash Region 2 (Intel(R) ME) Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: MBARB + 5Ch Default Value: 00000000h Bit 31:29 Attribute: Size: RO 32 bits Description Reserved Region Limit (RL)--RO. This specifies address bits 24:12 for the Region 2 Limit. 28:16 The value in this register is loaded from the contents in the Flash Descriptor.FLREG2.Region Limit. 15:13 Reserved Region Base (RB)--RO. This specifies address bits 24:12 for the Region 2 Base 12:0 852 The value in this register is loaded from the contents in the Flash Descriptor.FLREG2.Region Base. Datasheet Serial Peripheral Interface (SPI) 21.4.10 FREG3--Flash Region 3 (GbE) Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: MBARB + 60h Default Value: 00000000hSize: Bit 31:29 Attribute: 32 bits RO Description Reserved Region Limit (RL)--RO. This specifies address bits 24:12 for the Region 3 Limit. 28:16 The value in this register is loaded from the contents in the Flash Descriptor.FLREG3.Region Limit. 15:13 Reserved Region Base (RB)--RO. This specifies address bits 24:12 for the Region 3 Base 12:0 21.4.11 The value in this register is loaded from the contents in the Flash Descriptor.FLREG3.Region Base. PR0--Protected Range 0 Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: Default Value: Note: Attribute: Size: R/W 32 bits This register can not be written when the FLOCKDN bit is set to 1. Bit Description 31 Write Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that writes and erases directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. 30:29 Reserved 28:16 Protected Range Limit--R/W. This field corresponds to FLA address bits 24:12 and specifies the upper limit of the protected range. Address bits 11:0 are assumed to be FFFh for the limit comparison. Any address greater than the value programmed in this field is unaffected by this protected range. 15 14:13 12:0 Datasheet MBARB + 74h 00000000h Read Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that read directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. Reserved Protected Range Base--R/W. This field corresponds to FLA address bits 24:12 and specifies the lower base of the protected range. Address bits 11:0 are assumed to be 000h for the base comparison. Any address less than the value programmed in this field is unaffected by this protected range. 853 Serial Peripheral Interface (SPI) 21.4.12 PR1--Protected Range 1 Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: Default Value: Note: Attribute: Size: R/W 32 bits This register can not be written when the FLOCKDN bit is set to 1. Bit Description 31 Write Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that writes and erases directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. 30:29 Reserved 28:16 Protected Range Limit--R/W. This field corresponds to FLA address bits 24:12 and specifies the upper limit of the protected range. Address bits 11:0 are assumed to be FFFh for the limit comparison. Any address greater than the value programmed in this field is unaffected by this protected range. 15 14:13 12:0 854 MBARB + 78h 00000000h Read Protection Enable--R/W. When set, this bit indicates that the Base and Limit fields in this register are valid and that read directed to addresses between them (inclusive) must be blocked by hardware. The base and limit fields are ignored when this bit is cleared. Reserved Protected Range Base--R/W. This field corresponds to FLA address bits 24:12 and specifies the lower base of the protected range. Address bits 11:0 are assumed to be 000h for the base comparison. Any address less than the value programmed in this field is unaffected by this protected range. Datasheet Serial Peripheral Interface (SPI) 21.4.13 SSFS--Software Sequencing Flash Status Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: Default Value: Note: Attribute: Size: RO, R/WC 8 bits The Software Sequencing control and status registers are reserved if the hardware sequencing control and status registers are used. Bit 7:5 Datasheet MBARB + 90h 00h Description Reserved 4 Access Error Log (AEL)--RO. This bit reflects the value of the Hardware Sequencing Status AEL register. 3 Flash Cycle Error (FCERR)--R/WC. Hardware sets this bit to 1 when a programmed access is blocked from running on the SPI interface due to one of the protection policies or when any of the programmed cycle registers is written while a programmed access is already in progress. This bit remains asserted until cleared by software writing a 1 or hardware reset due to a global reset or host partition reset in an Intel(R) ME enabled system. 2 Cycle Done Status--R/WC. The PCH sets this bit to 1 when the SPI Cycle completes (that is, SCIP bit is 0) after software sets the GO bit. This bit remains asserted until cleared by software writing a 1 or hardware reset due to a global reset or host partition reset in an Intel(R) ME enabled system. When this bit is set and the SPI SMI# Enable bit is set, an internal signal is asserted to the SMI# generation block. Software must make sure this bit is cleared prior to enabling the SPI SMI# assertion for a new programmed access. 1 Reserved 0 SPI Cycle In Progress (SCIP)--RO. Hardware sets this bit when software sets the SPI Cycle Go bit in the Command register. This bit remains set until the cycle completes on the SPI interface. Hardware automatically sets and clears this bit so that software can determine when read data is valid and/or when it is safe to begin programming the next command. Software must only program the next command when this bit is 0. 855 Serial Peripheral Interface (SPI) 21.4.14 SSFC--Software Sequencing Flash Control Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: MBARB + 91h Default Value: 000000h Bit 23:19 Attribute: Size: R/W 24 bits Description Reserved SPI Cycle Frequency (SCF)--R/W. This register sets frequency to use for all SPI software sequencing cycles (write, erase, fast read, read status, etc.) except for the read cycle which always run at 20 MHz. 18:16 000 = 20 MHz 001 = 33 MHz All other values = Reserved. This register is locked when the SPI Configuration Lock-Down bit is set. 15 Reserved 14 Data Cycle (DS)--R/W. When set to 1, there is data that corresponds to this transaction. When 0, no data is delivered for this cycle, and the DBC and data fields themselves are don't cares 13:8 Data Byte Count (DBC)--R/W. This field specifies the number of bytes to shift in or out during the data portion of the SPI cycle. The valid settings (in decimal) are any value from 0 to 3. The number of bytes transferred is the value of this field plus 1. Note that when this field is 00b, then there is 1 byte to transfer and that 11b means there are 4 bytes to transfer. 7 6:4 3 Reserved Cycle Opcode Pointer (COP)--R/W. This field selects one of the programmed opcodes in the Opcode Menu to be used as the SPI Command/Opcode. In the case of an Atomic Cycle Sequence, this determines the second command. Sequence Prefix Opcode Pointer (SPOP)--R/W. This field selects one of the two programmed prefix opcodes for use when performing an Atomic Cycle Sequence. A value of 0 points to the opcode in the least significant byte of the Prefix Opcodes register. By making this programmable, the PCH supports flash devices that have different opcodes for enabling writes to the data space versus status register. Atomic Cycle Sequence (ACS)--R/W. When set to 1 along with the SCGO assertion, the PCH will execute a sequence of commands on the SPI interface without allowing the LAN component to arbitrate and interleave cycles. The sequence is composed of: 2 * Atomic Sequence Prefix Command (8-bit opcode only) * Primary Command specified below by software (can include address and data) * Polling the Flash Status Register (opcode 05h) until bit 0 becomes 0b. The SPI Cycle in Progress bit remains set and the Cycle Done Status bit remains unset until the Busy bit in the Flash Status Register returns 0. 1 SPI Cycle Go (SCGO)--R/WS. This bit always returns 0 on reads. However, a write to this register with a `1' in this bit starts the SPI cycle defined by the other bits of this register. The "SPI Cycle in Progress" (SCIP) bit gets set by this action. Hardware must ignore writes to this bit while the Cycle In Progress bit is set. Hardware allows other bits in this register to be programmed for the same transaction when writing this bit to 1. This saves an additional memory write. 0 856 Reserved Datasheet Serial Peripheral Interface (SPI) 21.4.15 PREOP--Prefix Opcode Configuration Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: Default Value: MBARB + 94h 0000h Bit Attribute: Size: R/W 16 bits Description 15:8 Prefix Opcode 1--R/W. Software programs an SPI opcode into this field that is permitted to run as the first command in an atomic cycle sequence. 7:0 Prefix Opcode 0--R/W. Software programs an SPI opcode into this field that is permitted to run as the first command in an atomic cycle sequence. NOTE: This register is not writable when the SPI Configuration Lock-Down bit (MBARB + 00h:15) is set. 21.4.16 OPTYPE--Opcode Type Configuration Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: Default Value: MBARB + 96h 0000h Attribute: Size: R/W 16 bits Entries in this register correspond to the entries in the Opcode Menu Configuration register. Note: The definition below only provides write protection for opcodes that have addresses associated with them. Therefore, any erase or write opcodes that do not use an address should be avoided (for example, "Chip Erase" and "Auto-Address Increment Byte Program"). Bit 15:14 Description Opcode Type 7--R/W. See the description for bits 1:0 13:12 Opcode Type 6--R/W. See the description for bits 1:0 11:10 Opcode Type 5--R/W. See the description for bits 1:0 9:8 Opcode Type 4--R/W. See the description for bits 1:0 7:6 Opcode Type 3--R/W. See the description for bits 1:0 5:4 Opcode Type 2--R/W. See the description for bits 1:0 3:2 Opcode Type 1--R/W. See the description for bits 1:0 1:0 Opcode Type 0--R/W. This field specifies information about the corresponding Opcode 0. This information allows the hardware to 1) know whether to use the address field and 2) provide BIOS and Shared Flash protection capabilities. The encoding of the two bits is: 00 = No address associated with this Opcode; Read cycle type 01 = No address associated with this Opcode; Write cycle type 10 = Address required; Read cycle type 11 = Address required; Write cycle type NOTE: This register is not writable when the SPI Configuration Lock-Down bit (MBARB + 00h:15) is set. Datasheet 857 Serial Peripheral Interface (SPI) 21.4.17 OPMENU--Opcode Menu Configuration Register (GbE LAN Memory Mapped Configuration Registers) Memory Address: Default Value: MBARB + 98h 0000000000000000h Attribute: Size: R/W 64 bits Eight entries are available in this register to give GbE a sufficient set of commands for communicating with the flash device, while also restricting what malicious software can do. This keeps the hardware flexible enough to operate with a wide variety of SPI devices. Note: It is recommended that GbE avoid programming Write Enable opcodes in this menu. Malicious software could then perform writes and erases to the SPI flash without using the atomic cycle mechanism. This could cause functional failures in a shared flash environment. Write Enable opcodes should only be programmed in the Prefix Opcodes. Bit 63:56 Description Allowable Opcode 7--R/W. See the description for bits 7:0 55:48 Allowable Opcode 6--R/W. See the description for bits 7:0 47:40 Allowable Opcode 5--R/W. See the description for bits 7:0 39:32 Allowable Opcode 4--R/W. See the description for bits 7:0 31:24 Allowable Opcode 3--R/W. See the description for bits 7:0 23:16 Allowable Opcode 2--R/W. See the description for bits 7:0 15:8 Allowable Opcode 1--R/W. See the description for bits 7:0 7:0 Allowable Opcode 0--R/W. Software programs an SPI opcode into this field for use when initiating SPI commands through the Control Register. This register is not writable when the SPI Configuration Lock-Down bit (MBARB + 00h:15) is set. 858 Datasheet Thermal Sensor Registers (D31:F6) 22 Thermal Sensor Registers (D31:F6) 22.1 PCI Bus Configuration Registers Table 22-1. Thermal Sensor Register Address Map Datasheet Offset Mnemonic Register Name Default Type 00h-01h VID Vendor Identification 8086h RO 02h-03h DID Device Identification 3B32h RO 04h-05h CMD Command Register 0000h R/W, RO 06h-07h STS Device Status 0010h R/WC, RO 08h RID Revision ID 00h RO 09h PI Programming Interface 00h RO 0Ah SCC Sub Class Code 80h RO 0Bh BCC Base Class Code 11h RO 0Ch CLS Cache Line Size 00h RO 0Dh LT Latency Timer 00h RO 0Eh HTYPE Header Type 00h RO 0Fh BIST Built-in Self Test 00h RO 10h-13h TBAR Thermal Base Address (Memory) 00000004h R/W, RO 14h-17h TBARH Thermal Base Address High DWord 00000000h RO 2Ch-2Dh SVID 2Eh-2Fh SID 34h CAP_PTR 3Ch Subsystem Vendor Identifier 0000h R/WO Subsystem Identifier 0000h R/WO Capabilities Pointer 50h RO INTLN Interrupt Line 00h RW 3Dh INTPN Interrupt Pin See Description RO 40h-43h TBARB BIOS Assigned Thermal Base Address 00000004h R/W, RO 44h-47h TBARBH BIOS Assigned Thermal Base High DWord 00000000h R/W 50h-51h PID Power Management Identifiers 8001h RO 52h-53h PC Power Management Capabilities 0023h RO 54h-57h PCS Power Management Control and Status 0008h R/W, RO 859 Thermal Sensor Registers (D31:F6) 22.1.1 VID--Vendor Identification Register Offset Address: 00h-01h Default Value: 8086h Lockable: No Bit 15:0 22.1.2 Attribute: Size: Power Well: Description Vendor ID--RO. This is a 16-bit value assigned to Intel. Intel VID = 8086h DID--Device Identification Register Offset Address: 02h-03h Default Value: 3B32h Bit 15:0 22.1.3 RO 16 bit Core Attribute: Size: RO 16 bits Description Device ID (DID)--RO. Indicates the device number assigned by the SIG. CMD--Command Register Address Offset: 04h-05h Default Value: 0000h Bit 15:11 Attribute: Size: RO, R/W 16 bits Description Reserved Interrupt Disable (ID)--RW. Enables the device to assert an INTx#. 10 0 = When cleared, the INTx# signal may be asserted. 1 = When set, the Thermal logic's INTx# signal will be de-asserted. 9 FBE (Fast Back to Back Enable)--RO. Not implemented. Hardwired to 0. 8 SEN (SERR Enable)--RO. Not implemented. Hardwired to 0. 7 WCC (Wait Cycle Control)--RO. Not implemented. Hardwired to 0. 6 PER (Parity Error Response)--RO. Not implemented. Hardwired to 0. 5 VPS (VGA Palette Snoop)--RO. Not implemented. Hardwired to 0. 4 MWI (Memory Write and Invalidate Enable)--RO. Not implemented. Hardwired to 0. 3 SCE (Special Cycle Enable)--RO. Not implemented. Hardwired to 0. BME (Bus Master Enable)--R/W. 2 0 = Function disabled as bus master. 1 = Function enabled as bus master. Memory Space Enable (MSE)--RW. 1 0 860 0 = Disable 1 = Enable. Enables memory space accesses to the Thermal registers. IOS (I/O Space)--RO. The Thermal logic does not implement IO Space; therefore, this bit is hardwired to 0. Datasheet Thermal Sensor Registers (D31:F6) 22.1.4 STS--Status Register Address Offset: 06h-07h Default Value: 0010h Bit Description Detected Parity Error (DPE)--R/WC. This bit is set whenever a parity error is seen on the internal interface for this function, regardless of the setting of bit 6 in the command register. Software clears this bit by writing a 1 to this bit location. 14 SERR# Status (SERRS)--RO. Not implemented. Hardwired to 0. 13 Received Master Abort (RMA)--RO. Not implemented. Hardwired to 0. 12 Received Target Abort (RTA)--RO. Not implemented. Hardwired to 0. 11 Signaled Target-Abort (STA)--RO. Not implemented. Hardwired to 0. DEVSEL# Timing Status (DEVT)--RO. Does not apply. Hardwired to 0. 8 Master Data Parity Error (MDPE)--RO. Not implemented. Hardwired to 0. 7 Fast Back to Back Capable (FBC)--RO. Does not apply. Hardwired to 0. 6 Reserved 5 66 MHz Capable (C66)--RO. Does not apply. Hardwired to 0. 4 Capabilities List Exists (CLIST)--RO. Indicates that the controller contains a capabilities pointer list. The first item is pointed to by looking at configuration offset 34h. 3 Interrupt Status (IS)--RO. Reflects the state of the INTx# signal at the input of the enable/disable circuit. This bit is a 1 when the INTx# is asserted. This bit is a 0 after the interrupt is cleared (independent of the state of the Interrupt Disable bit in the command register). 2:0 Reserved RID--Revision Identification Register Address Offset: 08h Default Value: 00h Bit 7:0 22.1.6 Attribute: Size: RO 8 bits Description Revision ID (RID)--RO. Indicates the device specific revision identifier. PI--Programming Interface Register Address Offset: 09h Default Value: 00h Bit 7:0 Datasheet R/WC, RO 16 bits 15 10:9 22.1.5 Attribute: Size: Attribute: Size: RO 8 bits Description Programming Interface (PI)--RO. The PCH Thermal logic has no standard programming interface. 861 Thermal Sensor Registers (D31:F6) 22.1.7 SCC--Sub Class Code Register Address Offset: 0Ah Default Value: 80h Bit 7:0 22.1.8 Attribute: Size: Description Sub Class Code (SCC)--RO. Value assigned to the PCH Thermal logic. BCC--Base Class Code Register Address Offset: 0Bh Default Value: 11h Bit 7:0 22.1.9 Attribute: Size: Base Class Code (BCC)--RO. Value assigned to the PCH Thermal logic. CLS--Cache Line Size Register Bit 7:0 Attribute: Size: Cache Line Size (CLS)--RO. Does not apply to PCI Bus Target-only devices. LT--Latency Timer Register Bit 7:0 Attribute: Size: RO 8 bits Description Latency Timer (LT)--RO. Does not apply to PCI Bus Target-only devices. HTYPE--Header Type Register Address Offset: 0Eh Default Value: 00h Attribute: Size: RO 8 bits Bit Description 7 Multi-Function Device (MFD)--RO. This bit is 0 because a multi-function device only needs to be marked as such in Function 0, and the Thermal registers are not in Function 0. 6:0 862 RO 8 bits Description Address Offset: 0Dh Default Value: 00h 22.1.11 RO 8 bits Description Address Offset: 0Ch Default Value: 00h 22.1.10 RO 8 bits Header Type (HTYPE)--RO. Implements Type 0 Configuration header. Datasheet Thermal Sensor Registers (D31:F6) 22.1.12 TBAR--Thermal Base Register Address Offset: 10h-13h Default Value: 00000004h Attribute: Size: RW, RO 32 bits This BAR creates 4K bytes of memory space to signify the base address of Thermal memory mapped configuration registers. This memory space is active when the Command (CMD) register Memory Space Enable (MSE) bit is set and either TBAR[31:12] or TBARH are programmed to a non-zero address. This BAR is owned by the Operating System, and allows the OS to locate the Thermal registers in system memory space. Bit 31:12 11:4 3 2:1 0 22.1.13 Description Thermal Base Address (TBA)--RW. This field provides the base address for the Thermal logic memory mapped configuration registers. 4 KB bytes are requested by hardwiring bits 11:4 to 0s. Reserved Prefetchable (PREF)--RO. Indicates that this BAR is NOT pre-fetchable. Address Range (ADDRNG)--RO. Indicates that this BAR can be located anywhere in 64 bit address space. Space Type (SPTYP)--RO. Indicates that this BAR is located in memory space. TBARH--Thermal Base High DWord Register Address Offset: 14h-17h Default Value: 00000000h Attribute: Size: RW, RO 32 bits This BAR extension holds the high 32 bits of the 64 bit TBAR. In conjunction with TBAR, it creates 4 KB of memory space to signify the base address of Thermal memory mapped configuration registers. Bit 31:0 Datasheet Description Thermal Base Address High (TBAH)--R/W. TBAR bits 63:32. 863 Thermal Sensor Registers (D31:F6) 22.1.14 SVID--Subsystem Vendor ID Register Address Offset: 2Ch-2Dh Default Value: 0000h Attribute: Size: R/WO 16 bits This register should be implemented for any function that could be instantiated more than once in a given system. The SVID register, in combination with the Subsystem ID register, enables the operating environment to distinguish one subsystem from the other(s). Software (BIOS) will write the value to this register. After that, the value can be read, but writes to the register will have no effect. The write to this register should be combined with the write to the SID to create one 32-bit write. This register is not affected by D3HOT to D0 reset. Bit 15:0 22.1.15 Description SVID (SVID)--R/WO. These RWO bits have no PCH functionality. SID--Subsystem ID Register Address Offset: 2Eh-2Fh Default Value: 0000h Attribute: Size: R/WO 16 bits This register should be implemented for any function that could be instantiated more than once in a given system. The SID register, in combination with the Subsystem Vendor ID register make it possible for the operating environment to distinguish one subsystem from the other(s). Software (BIOS) will write the value to this register. After that, the value can be read, but writes to the register will have no effect. The write to this register should be combined with the write to the SVID to create one 32-bit write. This register is not affected by D3HOT to D0 reset. Bit 15:0 22.1.16 Description SID (SAID)--R/WO. These RWO bits have no PCH functionality. CAP_PTR--Capabilities Pointer Register Address Offset: 34h Default Value: 50h 864 Attribute: Size: RO 8 bits Bit Description 7:0 Capability Pointer (CP)--RO. Indicates that the first capability pointer offset is offset 50h (Power Management Capability). Datasheet Thermal Sensor Registers (D31:F6) 22.1.17 Offset 3Ch - INTLN--Interrupt Line Register Address Offset: 3Ch Default Value: 00h Bit 7:0 22.1.18 Attribute: Size: Description Interrupt Line--RW. PCH hardware does not use this field directly. It is used to communicate to software the interrupt line that the interrupt pin is connected to. INTPN--Interrupt Pin Register Address Offset: 3Dh Default Value: See description Bit 22.1.19 RW 8 bits Attribute: Size: RO 8 bits Description 7:4 Reserved 3:0 Interrupt Pin--RO. This reflects the value of the Device 31 interrupt pin bits 27:24 (TTIP) in chipset configuration space. TBARB--BIOS Assigned Thermal Base Address Register Address Offset: 40h-43h Default Value: 00000004h Attribute: Size: RW,RO 32 bits This BAR creates 4 KB of memory space to signify the base address of Thermal memory mapped configuration registers. This memory space is active when TBARB.SPTYPEN is asserted. This BAR is owned by the BIOS, and allows the BIOS to locate the Thermal registers in system memory space. If both TBAR and TBARB are programmed, then the OS and BIOS each have their own independent "view" of the Thermal registers, and must use the TSIU register to denote Thermal registers ownership/availability. Bit 31:12 11:4 3 2:1 Description Thermal Base Address (TBA)--RW. This field provides the base address for the Thermal logic memory mapped configuration registers. 4K B bytes are requested by hardwiring bits 11:4 to 0s. Reserved Prefetchable (PREF)--RO. Indicates that this BAR is NOT pre-fetchable. Address Range (ADDRNG)--RO. Indicates that this BAR can be located anywhere in 64 bit address space. Space Type Enable (SPTYPEN)--RW. 0 Datasheet 0 = Disable. 1 = Enable. When set to 1b by software, enables the decode of this memory BAR. 865 Thermal Sensor Registers (D31:F6) 22.1.20 TBARBH--BIOS Assigned Thermal Base High DWord Register Address Offset: 44h-47h Default Value: 00000000h Attribute: Size: RW 32 bits This BAR extension holds the high 32 bits of the 64 bit TBARB. Bit 31:0 22.1.21 Description Thermal Base Address High (TBAH)--RW. TBAR bits 61:32. PID--PCI Power Management Capability ID Register Address Offset: 50h-51h Default Value: 8001h 22.1.22 RO 16 bits Bit Description 15:8 Next Capability (NEXT)--RO. Indicates that this is the last capability structure in the list. 7:0 Cap ID (CAP)--RO. Indicates that this pointer is a PCI power management capability PC--Power Management Capabilities Register Address Offset: 52h-53h Default Value: 0023h Bit 15:11 Attribute: Size: RO 16 bits Description PME_Support--RO. Indicates PME# is not supported 10 D2_Support--RO. The D2 state is not supported. 9 D1_Support--RO. The D1 state is not supported. 8:6 Aux_Current--RO. PME# from D3COLD state is not supported, therefore this field is 000b. 5 Device Specific Initialization (DSI)--RO. Indicates that device-specific initialization is required. 4 Reserved 3 2:0 866 Attribute: Size: PME Clock (PMEC)--RO. Does not apply. Hardwired to 0. Version (VS)--RO. Indicates support for Revision 1.2 of the PCI Power Management Specification. Datasheet Thermal Sensor Registers (D31:F6) 22.1.23 PCS--Power Management Control And Status Register Address Offset: 54h-57h Default Value: 0008h Bit 31:24 Attribute: Size: RW, RO 32 bits Description Data--RO. Does not apply. Hardwired to 0s. 23 Bus Power/Clock Control Enable (BPCCE)--RO. Hardwired to 0. 22 B2/B3 Support (B23)--RO. Does not apply. Hardwired to 0. 21:16 15 14:9 8 7:4 3 2 Reserved PME Status (PMES)--RO. This bit is always 0, since this PCI Function does not generate PME# Reserved PME Enable (PMEE)--RO. This bit is always zero, since this PCI Function does not generate PME# Reserved No Soft Reset--RO. When set 1, this bit indicates that devices transitioning from D3HOT to D0 because of PowerState commands do not perform an internal reset. Configuration context is preserved. Upon transition from D3HOT to D0 initialized state, no additional operating system intervention is required to preserve Configuration Context beyond writing the PowerState bits. Reserved Power State (PS)--R/W. This field is used both to determine the current power state of the Thermal controller and to set a new power state. The values are: 00 = D0 state 11 = D3HOT state 1:0 If software attempts to write a value of 10b or 01b in to this field, the write operation must complete normally; however, the data is discarded and no state change occurs. When in the D3HOT states, the Thermal controller's configuration space is available, but the I/O and memory spaces are not. Additionally, interrupts are blocked. When software changes this value from the D3HOT state to the D0 state, no internal warm (soft) reset is generated. Datasheet 867 Thermal Sensor Registers (D31:F6) 22.2 Thermal Memory Mapped Configuration Registers (Thermal Sensor - D31:F26) The base memory for these thermal memory mapped configuration registers is specified in the TBARB (D31:F6:Offset 40h). The individual registers are then accessible at TBARB + Offset. Table 22-2. Thermal Memory Mapped Configuration Register Address Map (Sheet 1 of 2) 868 Offset Mnemonic 0h TSIU Register Name Thermal Sensor In Use Default Type 00h RO,R/W 1h TSE Thermal Sensor Enable 00h R/W 2h TSS Thermal Sensor Status 00h R/W 3h TSTR Thermal Sensor Thermometer Read FFh RO 4h TSTTP Thermal Sensor Temperature Trip Point 00000000h R/W 8h TSC0 Thermal Sensor Catastrophic Lock Down 00h R/W 0Ch TSES Thermal Sensor Error Status 00h R/WC 0Dh TSGPEN Thermal Sensor General Purpose Event Enable 00h R/W 0Eh TSPC Thermal Sensor Policy Control 00h R/W, RO 10h PPEC Processor Power Error Correction (Mobile Only) 0000h R/W 12h CTA Processor Core Temperature Adjust 0000h R/W 16h MGTA Memory Controller/Graphics Temperature Adjust 0000h R/W 1Ah TRC Thermal Reporting Control 0000h R/W 20h TES Turbo Interrupt Status (Mobile Only) 00h R/WC, RO 21h TEN Turbo Interrupt Enable (Mobile Only) 00h R/W, RO 24h PSC Power Sharing Configuration (Mobile Only) 00000000h R/W 30h CTV1 Core Temperature Value 1 0000h RO 32h CTV2 Core Temperature Value 2 34h CEV1 Core Energy Value 1 3Fh AE 50h HTS Host Status (Mobile Only) 56h PTL Processor Temperature Limit (Mobile Only) 58h MGTV 60h PTV 64h MMGPC 66h MPPC 0000h RO 00000000h RO 00h R/W 00000000000 0h R/W 0000h R/W Memory Controller/Graphics Temperature Value 00000000000 00000h RO Alert Enable Processor Temperature Value 0000h RO Max Memory Controller/Graphics Power Clamp (Mobile Only) 0000h R/W Max Processor Power Clamp (Mobile Only) 0000h R/W Datasheet Thermal Sensor Registers (D31:F6) Table 22-2. Thermal Memory Mapped Configuration Register Address Map (Sheet 2 of 2) 22.2.1 Offset Mnemonic Register Name Default Type 68h MPCPC Max Processor Core Power Clamp (Mobile Only) 0000h R/W 82h TSPIEN Thermal Sensor PCI Interrupt Event enable 00h R/W 83h TSLOCK Thermal Sensor Register Lock Control 00h R/W 98h STS Turbo Status (Mobile Only) 9Ch SEC Event Clear (Mobile Only) 00000000h RO 00h RO, R/WO A4h TC3 Thermal Compares 3 00000000h RO A8h TC1 Thermal Compares 1 00000000h RO ACh TC2 Thermal Compares 2 00000000h RO B0 DTV DIMM Temperature Values 00000000h RO D8h ITV Internal Temperature Values 00000000h RO TSIU--Thermal Sensor In Use Register Offset Address: Default Value: TBARB+00h 00h Bit 7:1 Attribute: Size: RO, R/W 8 bit Description Reserved Thermal Sensor In Use (TSIU)--R/W. This is a SW semaphore bit. After a core well reset, a read to this bit returns a 0. After the first read, subsequent reads will return a 1. 0 22.2.2 A write of a 1 to this bit will reset the next read value to 0. Writing a 0 to this bit has no effect. Software can poll this bit until it reads a 0, and will then own the usage of the thermal sensor. This bit has no other effect on the hardware, and is only used as a semaphore among various independent software threads that may need to use the thermal sensor. Software that reads this register but does not intend to claim exclusive access of the thermal sensor must write a 1 to this bit if it reads a 0, to allow other software threads to claim it. TSE--Thermal Sensor Enable Register Offset Address: Default Value: TBARB+01h 00h Attribute: Size: R/W 8 bit Bit Description 7:0 Thermal Sensor Enable (TSE)--R/W. BIOS programs this register to the value B8h to enable the thermal sensor. All other values are reserved. Datasheet 869 Thermal Sensor Registers (D31:F6) 22.2.3 TSS--Thermal Sensor Status Register Offset Address: Default Value: TBARB+02h 00h Bit Attribute: Size: RO 8 bit Description Catastrophic Trip Indicator (CTI)--RO. 7 0 = The temperature is below the catastrophic setting. 1 = The temperature is above the catastrophic setting. Hot Trip Indicator (HTI)--RO. 6 0 = The temperature is below the Hot setting. 1 = The temperature is above the Hot setting. Auxiliary Trip Indicator (ATI)--RO. 5 0 = The temperature is below the Auxiliary setting. 1 = The temperature is above the Auxiliary setting. 4 Reserved Auxiliary2 Trip Indicator (ATI)--RO. 3 2:0 22.2.4 0 = The temperature is below the Auxiliary2 setting. 1 = The temperature is above the Auxiliary2 setting. Reserved TSTR--Thermal Sensor Thermometer Read Register Offset Address: Default Value: TBARB+03h FFh Attribute: Size: RO 8 bit This register generally provides the calibrated temperature from the thermometer circuit when the thermometer is enabled. Bit 7:0 870 Description Thermometer Reading (TR)--R/O. Value corresponds to the thermal sensor temperature. This register has a straight binary encoding that ranges from 0 to FFh. The value in this field is valid only if the TR value is between 00h and 7Fh. Datasheet Thermal Sensor Registers (D31:F6) 22.2.5 TSTTP--Thermal Sensor Temperature Trip Point Register Offset Address: TBARB+04h Default Value: 00000000h Bit 31:24 Attribute: Size: R/W 32 bit Description Auxiliary2 Trip Point Setting (A2TPS)--R/W. These bits set the Auxiliary2 trip point. These bits are lockable using programming the policy-lock down bit (bit 7) of TSPC register. Auxiliary Trip Point Setting (ATPS)--R/W. These bits set the Auxiliary trip point. 23:16 These bits are lockable using programming the policy-lock down bit (bit 7) of TSPC register. These bits may only be programmed from 0h to 7Fh. Setting bit 23 is illegal. Hot Trip Point Setting (HTPS)--R/W. These bits set the Hot trip point. 15:8 These bits are lockable using programming the policy-lock down bit (bit 7) of TSPC register. NOTE: BIOS should program to 3Ah for setting Hot Trip Point to 108 C. Catastrophic Trip Point Setting (CTPS)--R/W. These bits set the catastrophic trip point. 7:0 These bits are lockable using TSCO.bit 7. NOTE: BIOS should program to 2Bh for setting Catastrophic Trip Point to 120 C. 22.2.6 TSCO--Thermal Sensor Catastrophic Lock-Down Register Offset Address: Default Value: Bit TBARB+08h 00h Attribute: Size: R/W 8 bit Description Lock bit for Catastrophic (LBC)--R/W. 7 0 = Catastrophic programming interface is unlocked 1 = Locks the Catastrophic programming interface including TSTTP.bits[7:0]. This bit may only be set to a 0 by a host partitioned reset (note that CF9 warm reset is a host partitioned reset). Writing a 0 to this bit has no effect. TSCO.[7] is unlocked by default and can be locked through BIOS. 6:0 Datasheet Reserved 871 Thermal Sensor Registers (D31:F6) 22.2.7 TSES--Thermal Sensor Error Status Register Offset Address: TBARB+0Ch Default Value: 00h Bit Attribute: Size: R/WC 8 bit Description Auxiliary2 High-to-LowEvent--R/WC. 7 0 = No trip occurs. 1 = Indicates that an Auxiliary2 Thermal Sensor trip event occurred based on a higher to lower temperature transition through the trip point. Software must write a 1 to clear this status bit. Catastrophic High-to-LowEvent--R/WC. 6 0 = No trip occurs. 1 = Indicates that a Catastrophic Thermal Sensor trip event occurred based on a higher to lower temperature transition through the trip point. 1 = Software must write a 1 to clear this status bit. Hot High-to-LowEvent--R/WC. 5 0 = No trip occurs. 1 = Indicates that a Hot Thermal Sensor trip event occurred based on a higher to lower temperature transition through the trip point. Software must write a 1 to clear this status bit. Auxiliary High-to-LowEvent--R/WC. 4 0 = No trip occurs. 1 = Indicates that an Auxiliary Thermal Sensor trip event occurred based on a higher to lower temperature transition through the trip point. Software must write a 1 to clear this status bit. Auxiliary2 Low-to-High Event--R/WC. 3 0 = No trip occurs. 1 = Indicates that an Auxiliary2 Thermal Sensor trip event occurred based on a lower to higher temperature transition through the trip point. Software must write a 1 to clear this status bit. Catastrophic Low-to-High Event--R/WC. 2 0 = No trip occurs. 1 = Indicates that a Catastrophic Thermal Sensor trip event occurred based on a lower to higher temperature transition through the trip point. Software must write a 1 to clear this status bit. Hot Low-to-High Event--R/WC. 1 0 = No trip occurs. 1 = Indicates that a hot Thermal Sensor trip event occurred based on a lower to higher temperature transition through the trip point. Software must write a 1 to clear this status bit. Auxiliary Low-to-High Event--R/WC. 0 0 = No trip occurs. 1 = Indicates that an Auxiliary Thermal Sensor trip event occurred based on a lower to higher temperature transition through the trip point. Software must write a 1 to clear this status bit. 872 Datasheet Thermal Sensor Registers (D31:F6) 22.2.8 TSGPEN--Thermal Sensor General Purpose Event Enable Register Offset Address: Default Value: TBARB+0Dh 00h Attribute: Size: R/W 8 bit This register controls the conditions that result in General Purpose events to be signalled from Thermal Sensor trip events. Bit Description Auxiliary2 High-to-Low Enable--R/W. 7 0 = Corresponding status bit does not result in General Purpose event. 1 = General purpose event is signaled when the corresponding status bit is set in the Thermal Error Status Register. Catastrophic High-to-Low Enable--R/W. 6 0 = Corresponding status bit does not result in General Purpose event. 1 = General purpose event is signaled when the corresponding status bit is set in the Thermal Error Status Register. Hot High-to-Low Enable--R/W. 5 0 = Corresponding status bit does not result in General Purpose event. 1 = General purpose event is signaled when the corresponding status bit is set in the Thermal Error Status Register. Auxiliary High-to-Low Enable--R/W. 4 0 = Corresponding status bit does not result in General Purpose event. 1 = General purpose event is signaled when the corresponding status bit is set in the Thermal Error Status Register. Auxiliary2 Low-to-High Enable--R/W. 3 0 = Corresponding status bit does not result in General Purpose event. 1 = General purpose event is signaled when the corresponding status bit is set in the Thermal Error Status Register. Catastrophic Low-to-High Enable--R/W. 2 0 = Corresponding status bit does not result in General Purpose event. 1 = General purpose event is signaled when the corresponding status bit is set in the Thermal Error Status Register. Hot Low-to-High Enable--R/W. 1 0 = Corresponding status bit does not result in General Purpose event. 1 = General purpose event is signaled when the corresponding status bit is set in the Thermal Error Status Register. Auxiliary Low-to-High Enable--R/W. 0 Datasheet 0 = Corresponding status bit does not result in General Purpose event. 1 = General purpose event is signaled when the corresponding status bit is set in the Thermal Error Status Register. 873 Thermal Sensor Registers (D31:F6) 22.2.9 TSPC--Thermal Sensor Policy Control Register Offset Address: TBARB+0Eh Default Value: 00h Bit Attribute: Size: R/W, RO 8 bit Description Policy Lock-Down Bit--R/W. 0 = This register can be programmed and modified. 1 = Prevents writes to this register and TSTTP.bits [31:16] (offset 04h). 7 NOTE: TSCO.bit 7 (offset 08h) and TSLOCK.bit2 (offset 83h) must also be 1 when this bit is set to 1. This bit is reset to 0 by a host partitioned reset (note that CF9 warm reset is a host partitioned reset). Writing a 0 to this bit has no effect. 6 Catastrophic Power-Down Enable--R/W. When set to 1, the power management logic unconditionally transitions to the S5 state when a catastrophic temperature is detected by the sensor. NOTE: BIOS should set this bit to 1 to enable Catastrophic power-down. 5:4 Reserved SMI Enable on Auxiliary2 Thermal Sensor Trip--R/W. 3 0 = Disables SMI# assertion for Auxiliary2 Thermal Sensor events. 1 = Enables SMI# assertions on Auxiliary2 Thermal Sensor events for either low-tohigh or high-to-low events. (Both edges are enabled by this bit.) SMI Enable on Catastrophic Thermal Sensor Trip--R/W. 2 0 = Disables SMI# assertion for Catastrophic Thermal Sensor events. 1 = Enables SMI# assertions on Catastrophic Thermal Sensor events for either low-tohigh or high-to-low events. (Both edges are enabled by this bit.) SMI Enable on Hot Thermal Sensor Trip--R/W. 1 0 = Disables SMI# assertion for Hot Thermal Sensor events. 1 = Enables SMI# assertions on Hot Thermal Sensor events for either low-to-high or high-to-low events. (Both edges are enabled by this bit.) SMI Enable on Auxiliary Thermal Sensor Trip--R/W. 0 22.2.10 0 = Disables SMI# assertion for Auxiliary Thermal Sensor events. 1 = Enables SMI# assertions on Auxiliary Thermal Sensor events for either low-tohigh or high-to-low events. (Both edges are enabled by this bit.) PPEC--Processor Power Error Correction Register (Mobile Only) Offset Address: Default Value: Bit 15:0 874 TBARB+10h 0000h Attribute: Size: R/W 16 bit Description Processor Power Error Correction Data--R/W. The register is locked by AE.bit7 (offset 3Fh). Datasheet Thermal Sensor Registers (D31:F6) 22.2.11 CTA--Processor Core Temperature Adjust Register Offset Address: Default Value: TBARB+12h 0000h Bit 15:0 Attribute: Size: R/W 16 bit Description Processor Core Temperature Adjust (CTA)--R/W. BIOS writes the processor core's TJmax (from the processor MSR) into this register. Intel(R) ME FW uses the value to create the processor core's absolute temperature. Note that the value received from the processor core over PECI is a negative offset relative to the CTA value. The register is locked by AE.bit7 (offset 3Fh). 22.2.12 PTA--PCH Temperature Adjust Register Offset Address: TBARB+14h Default Value: 0000h Bit Attribute: Size: R/W 16 bit Description PCH Slope--R/W. This field contains the PCH slope for calculating PCH temperature. 15:8 The bits are locked by AE.bit7 (offset 3Fh). NOTE: When thermal reporting is enabled, BIOS must write 80h into this field. Offset--R/W. This field contains the PCH offset for calculating PCH temperature. 7:0 The bits are locked by AE.bit7 (offset 3Fh). NOTE: When thermal reporting is enabled, BIOS must write 8Ch into this field. 22.2.13 MGTA--Memory Controller/Graphics Temperature Adjust Register Offset Address: TBARB+16h Default Value: 0000h Attribute: Size: R/W 16 bit Bit Description 15:8 Memory Controller/Graphics Slope--R/W. This field contains the Memory Controller/Graphics slope for calculating the Memory Controller/Graphics temperature. The bits are locked by AE.bit7 (offset 3Fh). 7:0 Offset--R/W. This field contains the Memory Controller/Graphics offset for calculating the Memory Controller/Graphics temperature. The bits are locked by AE.bit7 (offset 3Fh). Datasheet 875 Thermal Sensor Registers (D31:F6) 22.2.14 TRC--Thermal Reporting Control Register Offset Address: TBARB+1Ah Default Value: 0000h Bit 15 13:14 Attribute: Size: R/W 16 bit Description Processor Core #2 Temperature Read Enable--R/W. In systems with 2 processors, when set to 1, the bit will enable reads of the 2nd processor core temperature. Reserved Thermal Data Reporting Enable--R/W. 12 11:9 8 0 = Disable 1 = Enable Reserved C6 Workaround Enable--R/W. Setting this bit enables PECI to work with Lynnfield and Clarksfield Processors that can provide bad readings when they are in C6. This workaround will bring the Processor Core out of C6 while the PECI transaction is in progress, and then return the Processor Core to the C6 state after completing the PECI transaction. Processor Core Temperature Read Enable--R/W. 7 0 = Disables reads of the processor core temperature 1 = Enables reads of the processor core temperature. Processor Core Energy Read Enable--R/W 6 0 = Disables reads of the processor core energy values. 1 = Enables reads of the processor core energy values. PCH Temperature Read Enable--R/W 5 0 = Disables reads of the PCH temperature. 1 = Enables reads of the PCH temperature. 4 0 = Disables reads of Memory Controller/Graphics temperature. 1 = Enables reads of Memory Controller/Graphics temperature. Memory Controller/Graphics Temperature Read Enable--R/W DIMM4 Temperature Read Enable--R/W 3 0 = Disables reads of DIMM4 temperature. 1 = Enables reads of DIMM4 temperature. DIMM3 Temperature Read Enable--R/W 2 0 = Disables reads of DIMM3 temperature. 1 = Enables reads of DIMM3 temperature. DIMM2 Temperature Read Enable--R/W 1 0 = Disables reads of DIMM2 temperature. 1 = Enables reads of DIMM2 temperature. DIMM1 Temperature Read Enable--R/W 0 876 0 = Disables reads of DIMM1 temperature. 1 = Enables reads of DIMM1 temperature. Datasheet Thermal Sensor Registers (D31:F6) 22.2.15 TES--Turbo Interrupt Status Register (Mobile Only) Offset Address: TBARB+20h Default Value: 00h Bit 7:1 Attribute: Size: R/WC, RO 8 bit Description Reserved Update Status--R/WC. The bit indicates updates over SMLink1 to Host has occurred. When set, it indicates that the Intel(R) ME has written to the Turbo Status register. 0 Software must write a 1 to clear this bit. NOTE: This bit is always set when the ME writes to the Turbo Status Register. If the interrupt is enabled in TEN, then an interrupt is sent to the host. There is only one interrupt bit that covers any write to the Turbo Status Register. 22.2.16 TEN--Turbo Interrupt Enable Register (Mobile Only) Offset Address: TBARB+21h Default Value: 00h Bit 7:1 0 22.2.17 Attribute: Size: R/W, RO 8 bit Description Reserved Update Interrupt Enable--R/W. When set, the bit enables interrupt for updates over SMLink1, so that updates to the Turbo Status register by an external controller are signaled to the host. PSC--Power Sharing Configuration Register (Mobile Only) Offset Address: TBARB+24h Default Value: 00000000h Attribute: Size: R/W 32 bit This register is R/W to the host and has no H/W functionality in the PCH. This register is programmed by BIOS during boot to indicate BIOS's preferences and behavior for the Intelligent Power Sharing driver. See the Intelligent Power Sharing BIOS Specification for bit definitions. Datasheet 877 Thermal Sensor Registers (D31:F6) 22.2.18 CTV1--Core Temperature Value 1 Register Offset Address: TBARB+30h Default Value: 0000h Bit Attribute: Size: RO 16 bit Description Processor Core Temperature--RO. This field provides the processor core temperature. 15:6 Bit 15, when set, indicates an illegal value or error in reading the processor core. Bits[13:6] contain the integer component (0 to 255) of the processor core temperature. 5:0 22.2.19 Fraction Value--RO. These bits contains the fraction Value (in 1/64th) of the processor core temperature. CTV2--Core Temperature Value 2 Register Offset Address: TBARB+32h Default Value: 0000h Bit Attribute: Size: RO 16 bit Description Processor Core #2 Temperature--RO. This field provides the processor core temperature of the second processor if present. 15:6 Bit 15, when set, indicates an illegal value or error in reading the processor core. Bits[13:6] contain the integer component (0 to 255) of the processor core temperature. 5:0 22.2.20 Fraction Value--RO. These bits contains the fraction Value (in 1/64th) of the processor core temperature. CEV1--Core Energy Value Register Offset Address: TBARB+34h Default Value: 00000000h 878 Attribute: Size: RO 32 bit Bit Description 31:0 Processor Core Energy--RO. This field provides the processor core energy. NOTE: Divide decimal value by 65535 to obtain Processor Core Energy in Joules. Processor Core power is then calculated by the difference between two Processor Core Energy Value readings in Joules, divided by the time interval in seconds. Datasheet Thermal Sensor Registers (D31:F6) 22.2.21 AE--Alert Enable Register Offset Address: TBARB+3Fh Default Value: 00h Bit Attribute: Size: R/W 8 bit Description Lock Enable--R/W. 7 0 = Lock Disabled. 1 = Lock Enabled. This will lock this register (including this bit) and the following registers: PPEC (offset 10h), CTA (offset 12h), and MGTA (offset 16h). This bit is reset by a Host Partitioned Reset. Note that CF9 warm reset is a Host Partitioned Reset. Processor Core Alert Enable--R/W. 6 When this bit is set, it will assert the PCH's TEMP_ALERT# pin if the processor core temperature is outside the temperature limits. This bit is lockable by bit 7 in this register. Memory Controller/Graphics Alert Enable--R/W. 5 When this bit is set, it will assert the PCH's TEMP_ALERT# pin if the Memory Controller/graphics temperature is outside the temperature limits. This bit is lockable by bit 7 in this register. PCH Alert Enable--R/W. 4 When this bit is set, it will assert the PCH's TEMP_ALERT# pin if the PCH temperature is outside the temperature limits. This bit is lockable by bit 7 in this register. DIMM Alert Enable--R/W. When this bit is set, it will assert the PCH's TEMP_ALERT# pin if DIMM1-4 temperature is outside of the temperature limits. 3 Note that the actual DIMMs that are read and used for the alert are enabled in the TRC register (offset 1Ah). This bit is lockable by bit 7 in this register. NOTE: Same Upper and Lower limits for triggering TEMP_ALERT# are used for all enabled DIMMs in the system. 2:0 22.2.22 Reserved HTS--Host Status Register (Mobile Only) Offset Address: TBARB+50h Default Value: 000000000000h Attribute: Size: R/W 48 bit This register represents the data byte [19:14] provided to the external controller when it does a read. Byte 14 is bit [7:0]. See Section 5.21.2.3 for more details. Datasheet 879 Thermal Sensor Registers (D31:F6) 22.2.23 PTL--Processor Temperature Limit Register (Mobile Only) Offset Address: TBARB+56h Default Value: 0000h Bit 15:0 22.2.24 Processor Temperature Limit--R/W. These bits are programmed by BIOS. This bit is a scratchpad register for SW. MGTV--Memory Controller/Graphics Temperature Value Register Bit 63:0 RO 64 bit Memory Controller/Graphics Temperature Value--RO. These bits contain the Memory Controller/Graphics temperature. PTV--Processor Temperature Value Register Bit 15:8 7:0 Attribute: Size: RO 16 bit Description Reserved Processor Temperature Value--RO. These bits contain the max temperature value of the processor core and the memory controller/graphics. MMGPC--Max Memory Controller/Graphics Power Clamp Register (Mobile Only) Offset Address: TBARB+64h Default Value: 0000h Bit 15:0 880 Attribute: Size: Description Offset Address: TBARB+60h Default Value: 0000h 22.2.26 R/W 16 bit Description Offset Address: TBARB+58h Default Value: 0000000000000000h 22.2.25 Attribute: Size: Attribute: Size: R/W 16 bit Description Max Memory Controller/Graphics Power Clamp--R/W. These bits set the max memory controller/graphics power. Datasheet Thermal Sensor Registers (D31:F6) 22.2.27 MPPC--Max Processor Power Clamp Register (Mobile Only) Offset Address: TBARB+66h Default Value: 0000h Bit 15:0 22.2.28 R/W 16 bit Description Max Processor Power Clamp--R/W. These bits set the max processor power. MPCPC--Max Processor Core Power Clamp Register (Mobile Only) Offset Address: TBARB+68h Default Value: 0000h Bit 15:0 Datasheet Attribute: Size: Attribute: Size: R/W 16 bit Description Max Processor Core Power Clamp--R/W. These bits set the max processor core power. 881 Thermal Sensor Registers (D31:F6) 22.2.29 TSPIEN--Thermal Sensor PCI Interrupt Enable Register Offset Address: TBARB+82h Default Value: 00h Attribute: Size: R/W 8 bit This register controls the conditions that result in PCI interrupts to be signalled from Thermal Sensor trip events. Software (device driver) needs to ensure that it can support PCI interrupts, even though BIOS may enable PCI interrupt capability through this register. Bit Description Auxiliary2 High-to-Low Enable--R/W. 7 0 = Corresponding status bit does not result in PCI interrupt. 1 = PCI interrupt is signaled when the corresponding status bit is set in the Thermal Error Status Register. Catastrophic High-to-Low Enable--R/W. 6 0 = Corresponding status bit does not result in PCI interrupt. 1 = PCI interrupt is signaled when the corresponding status bit is set in the Thermal Error Status Register. Hot High-to-Low Enable--R/W. 5 0 = Corresponding status bit does not result in PCI interrupt. 1 = PCI interrupt is signaled when the corresponding status bit is set in the Thermal Error Status Register. Auxiliary High-to-Low Enable--R/W. 4 0 = Corresponding status bit does not result in PCI interrupt. 1 = PCI interrupt is signaled when the corresponding status bit is set in the Thermal Error Status Register. Auxiliary2 Low-to-High Enable--R/W. 3 0 = Corresponding status bit does not result in PCI interrupt. 1 = PCI interrupt is signaled when the corresponding status bit is set in the Thermal Error Status Register. Catastrophic Low-to-High Enable--R/W. 2 0 = Corresponding status bit does not result in PCI interrupt. 1 = PCI interrupt is signaled when the corresponding status bit is set in the Thermal Error Status Register. Hot Low-to-High Enable--R/W. 1 0 = Corresponding status bit does not result in PCI interrupt. 1 = PCI interrupt is signaled when the corresponding status bit is set in the Thermal Error Status Register. Auxiliary Low-to-High Enable--R/W. 0 882 0 = Corresponding status bit does not result in PCI interrupt. 1 = PCI interrupt is signaled when the corresponding status bit is set in the Thermal Error Status Register. Datasheet Thermal Sensor Registers (D31:F6) 22.2.30 TSLOCK--Thermal Sensor Register Lock Control Register Offset Address: TBARB+83h Default Value: 00h Bit 7:3 2 Attribute: Size: R/W 8 bit Description Reserved Lock Control--R/W. This bit can only be set to a 0 by a host-partitioned reset. Writing a 0 to this bit has no effect. NOTE: CF9 warm reset is a host-partitioned reset. 1:0 22.2.31 Reserved STS--Turbo Status (Mobile Only) Offset Address: TBARB+98h Default Value: 00000000h Attribute: Size: RO 32 bit Bits [31:1] in this register are received from the EC when it does the Write STS Register Command. See Section 5.22.2 for more details Note that Write STS Register Command is a 48-bit transaction. The upper bits [47:32] of the write command are written into TC1 register at offset A8h. 22.2.32 SEC--Event Clear Register (Mobile Only) Offset Address: TBARB+9Ch Default Value: 00h Bit 7:1 0 22.2.33 Attribute: Size: RO, R/WO 8 bit Description Reserved Event Clear--R/WO. When the Host writes a 1 to this bit, it clears bit 0 of the Turbo Status Register (STS.bit0, offset 98h) TC3--Thermal Compares 3 Register Offset Address: TBARB+A4h Default Value: 00000000h Attribute: Size: RO 32 bit Bits [31:0] of this register are set when an external controller (such as EC) does the Write Processor Core Temp Limits command. See Section 5.21.2 for more information. Datasheet Bit Description 31:16 Processor Core Thermal Compare Upper Limit--RO. This is the upper limit used to compare against the processor core temperature. If the processor core temperature is greater than this value, then the PCH's TEMP_ALERT# signal is asserted if enabled. 15:0 Processor Core Thermal Compare Lower Limit--RO. This is the lower limit used to compare against the processor core temperature. If the processor core temperature is lower than this value, then the PCH's TEMP_ALERT# signal is asserted if enabled. 883 Thermal Sensor Registers (D31:F6) 22.2.34 TC1--Thermal Compares 1 Register Offset Address: TBARB+A8h Default Value: 00000000h Attribute: Size: RO 32 bit Bits [31:16] of this register are set when an external controller (such as EC) does the Write STS Register Command. See Section 5.21.2 for more info. Note that the Write STS Command are 48-bit transaction. The lower bits [31:0] are written into STS register at offset 50h. Bits [15:0] of this register are set when an external controller (such as EC) does the Write Memory Controller/Graphics Temp Limits Command. See Section 5.21.2 for more information. Bit 31:26 25:16 (Mobile Only) 884 Description Reserved Processor Power Limit (PSL)--R/W. The processor power limit encoded as a 10-bit, unsigned real number with a 1/10th-Watt granularity. Example: 60.0 Watts would be encoded as 258h 15:8 Memory Controller/Graphics Thermal Compare Upper Limit--RO. This is the upper limit used to compare against the memory controller/graphics temperature. If the memory controller/graphics temperature is greater than this value, then the PCH's TEMP_ALERT# signal is asserted if enabled. 7:0 Memory Controller/Graphics Thermal Compare Lower Limit--RO. This is the lower limit used to compare against the memory controller/graphics temperature. If the memory controller/graphics temperature is lower than this value, then the PCH's TEMP_ALERT# signal is asserted if enabled. Datasheet Thermal Sensor Registers (D31:F6) 22.2.35 TC2--Thermal Compares 2 Register Offset Address: TBARB+ACh Default Value: 00000000h Attribute: Size: RO 32 bit Bits [31:16] of this register are set when an external controller (such as, EC) does the Write DIMM Temp Limits Command. See Section 5.21.2 for more info. Bits [15:0] of this register are set when an external controller (such as EC) does the Write PCH Temp Limits Command. See Section 5.21.2 for more information. 22.2.36 Bit Description 31:24 DIMM Thermal Compare Upper Limit--RO. This is the upper limit used to compare against the DIMM's temperature. If the DIMM's temperature is greater than this value, then the PCH's TEMP_ALERT# signal is asserted if enabled. 23:16 DIMM Thermal Compare Lower Limit--RO. This is the lower limit used to compare against the DIMM's temperature. If the DIMM's temperature is lower than this value, then the PCH's TEMP_ALERT# signal is asserted if enabled. 15:8 PCH Thermal Compare Upper Limit--RO. This is the upper limit used to compare against the PCH temperature. If the PCH temperature is greater than this value, then the PCH's TEMP_ALERT# signal is asserted if enabled. 7:0 PCH Thermal Compare Lower Limit--RO. This is the lower limit used to compare against the PCH temperature. If the PCH temperature is lower than this value, then the PCH's TEMP_ALERT# signal is asserted if enabled. DTV--DIMM Temperature Values Register Offset Address: TBARB+B0h Default Value: 00000000h Bit 31:24 23:16 15:8 7:0 Datasheet Attribute: Size: RO 32 bit Description DIMM3 Temperature--RO. The bits contain DIMM3 temperature data in absolute degrees Celsius. These bits are data byte 8 provided to the external controller when it does a read over SMLink1. See Section 5.21.2 for more details. DIMM2 Temperature--RO. The bits contain DIMM2 temperature data in absolute degrees Celsius. These bits are data byte 7 provided to the external controller when it does a read over SMLink1. See Section 5.21.2 for more details. DIMM1 Temperature--RO. The bits contain DIMM1 temperature data in absolute degrees Celsius. These bits are data byte 6 provided to the external controller when it does a read over SMLink1. See Section 5.21.2 for more details. DIMM0 Temperature--RO. The bits contain DIMM0 temperature data in absolute degrees Celsius. These bits are data byte 5 provided to the external controller when it does a read over SMLink1. See Section 5.21.2 for more details. 885 Thermal Sensor Registers (D31:F6) 22.2.37 ITV--Internal Temperature Values Register Offset Address: TBARB+D8h Default Value: 00000000h Bit 31:24 Attribute: Size: RO 32 bit Description Reserved Sequence Number--RO. Provides a sequence number which can be used by the host to detect if the ME FW has hung. The value will roll over to 00h from FFh. The count is updated at approximately 200 ms. Host SW can check this value and if it isn't incriminated over a second or so, software should assume that the ME FW is hung. 23:16 NOTE: if the ME is reset, then this value will not change during the reset. After the reset is done, which may take up to 30 seconds, the ME may be on again and this value will start incrementing, indicating that the thermal values are valid again. These bits are data byte 9 provided to the external controller when it does a read over SMLink1. See Section 5.21.2 for more details. 15:8 7:0 Memory Controller/Graphics Temperature--RO. The bits contain memory controller/graphics temperature data in absolute degrees Celsius. These bits are data byte 4 provided to the external controller when it does a read over SMLink1. See Section 5.21.2 for more details. PCH Temperature--RO. The bits contain PCH temperature data in absolute degrees Celsius. These bits are data byte 1 provided to the external controller when it does a read over SMLink1. See Section 5.21.2 for more details. 886 Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.1 First Intel(R) Management Engine Interface (Intel(R) MEI) Configuration Registers (MEI--D22:F0) Table 23-1. Intel(R) MEI Configuration Registers Address Map (MEI--D22:F0) (Sheet 1 of 2) / Datasheet Offset Mnemonic Register Name Default Type 00h-01h VID Vendor Identification 8086h RO 02h-03h DID Device Identification See register description RO 04h-05h PCICMD PCI Command 0000h R/W, RO 06h-07h PCISTS PCI Status 0010h RO See register description RO 08h RID 09h-0Bh CC Class Code 0Eh HT Header Type 10h-17h MEI0_MBAR 2Ch-2Dh SVID 2Eh-2Fh SID 34h CAPP Capabilities List Pointer 3Ch-3Dh INTR 3Eh-3Fh MLMG 40h-43h HFS 44h-47h ME_UMA Revision Identification 0C8000h RO 00h RO 00000000 00000004h R/W, RO Subsystem Vendor ID 0000h R/WO Subsystem ID 0000h R/WO 50h RO Interrupt Information 0000h R/W, RO Maximum Latency/Minimum Grant 0000h RO Host Firmware Status 00000000h RO Management Engine UMA Register 00000000h RO MEI0 MMIO Base Address 48-4Bh GMES General ME Status 00000000h RO 4Ch-4Fh H_GS Host General Status 00000000h RO 50h-51h PID PCI Power Management Capability ID 6001h RO 52h-53h PC PCI Power Management Capabilities C803h RO 54h-55h PMCS PCI Power Management Control and Status 0008h R/WC, R/W, RO 8Ch-8Dh MID Message Signaled Interrupt Identifiers 0005h RO 887 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) Table 23-1. Intel(R) MEI Configuration Registers Address Map (MEI--D22:F0) (Sheet 2 of 2) 23.1.1 Offset Mnemonic 8Eh-8Fh MC 90h-93h MA 94h-97h MUA 98h-99h MD A0h HIDM BCh-BFh HERS C0h-DFh HER[1:8] Register Name Default Type Message Signaled Interrupt Message Control 0080h R/W, RO Message Signaled Interrupt Message Address 00000000h R/W, RO Message Signaled Interrupt Upper Address 00000000h R/W Message Signaled Interrupt Message Data 0000h R/W MEI Interrupt Delivery Mode 00h R/W MEI Extended Register Status 40000000h RO MEI Extended Register DW[1:8] 00000000h RO VID--Vendor Identification Register (MEI--D22:F0) Address Offset: 00h-01h Default Value: 8086h Bit 15:0 23.1.2 RO 16 bits Description Vendor ID (VID)--RO. This is a 16-bit value assigned to Intel. DID--Device Identification Register (MEI--D22:F0) Address Offset: 02h-03h Default Value: See bit description 888 Attribute: Size: Attribute: Size: RO 16 bits Bit Description 15:0 Device ID (DID)--RO. This is a 16-bit value assigned to the Intel Management Engine Interface controller. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.1.3 PCICMD--PCI Command Register (MEI--D22:F0) Address Offset: 04h-05h Default Value: 0000h Bit 15:11 Attribute: Size: R/W, RO 16 bits Description Reserved 10 Interrupt Disable (ID)--R/W. Disables this device from generating PCI line based interrupts. This bit does not have any effect on MSI operation. 9:3 Reserved Bus Master Enable (BME)--R/W.: 2 Controls the Intel MEI host controller's ability to act as a system memory master for data transfers. When this bit is cleared, Intel ME bus master activity stops and any active DMA engines return to an idle condition. This bit is made visible to firmware through the H_PCI_CSR register, and changes to this bit may be configured by the H_PCI_CSR register to generate an ME MSI. When this bit is 0, Intel MEI is blocked from generating MSI to the host CPU. NOTE: This bit does not block Intel MEI accesses to ME-UMA; that is, writes or reads to the host and ME circular buffers through the read window and write window registers still cause ME backbone transactions to ME-UMA. Memory Space Enable (MSE)--R/W. Controls access to the Intel ME's memory mapped register space. 1 0 23.1.4 0 = Disable. Memory cycles within the range specified by the memory base and limit registers are master aborted. 1 = Enable. Allows memory cycles within the range specified by the memory base and limit registers accepted. Reserved PCISTS--PCI Status Register (MEI--D22:F0) Address Offset: 06h-07h Default Value: 0010h Bit 15:5 4 Attribute: Size: RO 16 bits Description Reserved Capabilities List (CL)--RO. Indicates the presence of a capabilities list, hardwired to 1. Interrupt Status (IS)--RO. Indicates the interrupt status of the device. 3 2:0 Datasheet 0 = Interrupt is de-asserted. 1 = Interrupt is asserted. Reserved 889 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.1.5 RID--Revision Identification Register (MEI--D22:F0) Offset Address: 08h Default Value: See bit description Bit 7:0 23.1.6 Attribute: Size: Description Revision ID--RO. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Revision ID Register CC--Class Code Register (MEI--D22:F0) Address Offset: 09h-0Bh Default Value: 078000h Bit 23:16 15:8 7:0 23.1.7 Attribute: Size: RO 24 bits Description Base Class Code (BCC)--RO. Indicates the base class code of the Intel MEI device. Sub Class Code (SCC)--RO. Indicates the sub class code of the Intel MEI device. Programming Interface (PI)--RO. Indicates the programming interface of the Intel MEI device. HTYPE--Header Type Register (MEI--D22:F0) Address Offset: 0Eh Default Value: 80h Bit 7 6:0 890 RO 8 bits Attribute: Size: RO 8 bits Description Multi-Function Device (MFD)--RO. Indicates the Intel MEI host controller is part of a multifunction device. Header Layout (HL)--RO. Indicates that the Intel MEI uses a target device layout. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.1.8 MEI0_MBAR--MEI0 MMIO Base Address Register (MEI--D22:F0) Address Offset: 10h-17h Default Value: 0000000000000004h Attribute: Size: R/W, RO 64 bits This register allocates space for the MEI0 memory mapped registers. Bit Description 63:4 Base Address (BA)--R/W. Software programs this field with the base address of this region. 3 2:1 0 23.1.9 Prefetchable Memory (PM)--RO. Indicates that this range is not pre-fetchable. Type (TP)--RO. Set to 10b to indicate that this range can be mapped anywhere in 64bit address space. Resource Type Indicator (RTE)--RO. Indicates a request for register memory space. SVID--Subsystem Vendor ID Register (MEI--D22:F0) Address Offset: 2Ch-2Dh Default Value: 0000h 23.1.10 R/WO 16 bits Bit Description 15:0 Subsystem Vendor ID (SSVID)--R/WO. Indicates the sub-system vendor identifier. This field should be programmed by BIOS during boot-up. Once written, this register becomes Read Only. This field can only be cleared by PLTRST#. SID--Subsystem ID Register (MEI--D22:F0) Address Offset: 2Eh-2Fh Default Value: 0000h Bit 15:0 Datasheet Attribute: Size: Attribute: Size: R/WO 16 bits Description Subsystem ID (SSID)--R/WO. Indicates the sub-system identifier. This field should be programmed by BIOS during boot-up. Once written, this register becomes Read Only. This field can only be cleared by PLTRST#. 891 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.1.11 CAPP--Capabilities List Pointer Register (MEI--D22:F0) Address Offset: 34h Default Value: 50h Bit 7:0 23.1.12 Capabilities Pointer (PTR)--RO. Indicates that the pointer for the first entry in the capabilities list is at 50h in configuration space. INTR--Interrupt Information Register (MEI--D22:F0) Bit 15:8 7:0 Attribute: Size: R/W, RO 16 bits Description Interrupt Pin (IPIN)--RO. This indicates the interrupt pin the Intel MEI host controller uses. The value of 01h selects INTA# interrupt pin. Interrupt Line (ILINE)--R/W. Software written value to indicate which interrupt line (vector) the interrupt is connected to. No hardware action is taken on this register. HFS--Host Firmware Status Register (MEI--D22:F0) Address Offset: 40h-43h Default Value: 00000000h Bit 31:0 892 RO 8 bits Description Address Offset: 3Ch-3Dh Default Value: 0100h 23.1.13 Attribute: Size: Attribute: Size: RO 32 bits Description Host Firmware Status (HFS)--RO. This register field is used by Firmware to reflect the operating environment to the host. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.1.14 ME_UMA--Management Engine UMA Register (MEI--D22:F0) Address Offset: 44h-47h Default Value: 80000000h Bit 31 30:7 16 15:6 Attribute: Size: RO 32 bits Description Reserved--RO. Hardwired to 1. Can be used by host software to discover that this register is valid. Reserved ME UMA Size Valid--RO. This bit indicates that FW has written to the MUSZ field. Reserved ME UMA Size (MUSZ)--RO. This field reflect ME Firmware's desired size of MEUMA memory region. This field is set by ME firmware prior to core power bringup allowing BIOS to initialize memory. 000000b = 0 MB, No memory allocated to MEUMA 5:0 000001b = 1 MB 000010b = 2 MB 000100b = 4 MB 001000b = 8 MB 010000b = 16 MB 100000b = 32 MB 23.1.15 GMES--General ME Status Register (MEI--D22:F0) Address Offset: 48h-4Bh Default Value: 00000000h Bit 31:0 23.1.16 RO 32 bits Description General ME Status (ME_GS)--RO. This field is populated by ME. H_GS--Host General Status Register (MEI--D22:F0) Address Offset: 4Ch-4Fh Default Value: 00000000h Bit 31:0 Datasheet Attribute: Size: Attribute: Size: RO 32 bits Description Host General Status(H_GS)--RO. General Status of Host, this field is not used by Hardware 893 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.1.17 PID--PCI Power Management Capability ID Register (MEI--D22:F0) Address Offset: 50h-51h Default Value: 6001h Description 15:8 Next Capability (NEXT)--RO. Value of 60h indicates the location of the next pointer. Capability ID (CID)--RO. Indicates the linked list item is a PCI Power Management Register. PC--PCI Power Management Capabilities Register (MEI--D22:F0) Address Offset: 52h-53h Default Value: C803h Attribute: Size: RO 16 bits Bit Description 15:11 PME_Support (PSUP)--RO. This five-bit field indicates the power states in which the function may assert PME#. Intel MEI can assert PME# from any D-state except D1 or D2 which are not supported by Intel MEI. 10:9 8:6 894 RO 16 bits Bit 7:0 23.1.18 Attribute: Size: Reserved Aux_Current (AC)--RO. Reports the maximum Suspend well current required when in the D3cold state. Value of 00b is reported. 5 Device Specific Initialization (DSI)--RO. Indicates whether device-specific initialization is required. 4 Reserved 3 PME Clock (PMEC)--RO. Indicates that PCI clock is not required to generate PME#. 2:0 Version (VS)--RO. Hardwired to 011b to indicate support for Revision 1.2 of the PCI Power Management Specification. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.1.19 PMCS--PCI Power Management Control and Status Register (MEI--D22:F0) Address Offset: 54h-55h Default Value: 0008h Bit 15 Attribute: Size: R/WC, R/W, RO 16 bits Description PME Status (PMES)--R/WC. Bit is set by ME Firmware. Host software clears bit by writing `1' to bit. This bit is reset when CL_RST1# asserted. 14:9 8 Reserved PME Enable (PMEE)--R/W. This bit is read/write and is under the control of host SW. It does not directly have an effect on PME events. However, this bit is shadowed so ME FW can monitor it. ME FW will not cause the PMES bit to transition to 1 while the PMEE bit is 0, indicating that host SW had disabled PME. This bit is reset when PLTRST# asserted. 7:4 Reserved 3 No_Soft_Reset (NSR)--RO. This bit indicates that when the Intel MEI host controller is transitioning from D3hot to D0 due to a power state command, it does not perform an internal reset. Configuration context is preserved. 2 Reserved Power State (PS)--R/W. This field is used both to determine the current power state of the Intel MEI host controller and to set a new power state. The values are: 00 = D0 state (default) 1:0 11 = D3hot state The D1 and D2 states are not supported for the Intel MEI host controller. When in the D3hot state, the Intel ME's configuration space is available, but the register memory spaces are not. Additionally, interrupts are blocked. 23.1.20 MID--Message Signaled Interrupt Identifiers Register (MEI--D22:F0) Address Offset: 8Ch-8Dh Default Value: 0005h RO 16 bits Bit Description 15:8 Next Pointer (NEXT)--RO. Value of 00h indicates that this is the last item in the list. 7:0 Datasheet Attribute: Size: Capability ID (CID)--RO. Capabilities ID indicates MSI. 895 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.1.21 MC--Message Signaled Interrupt Message Control Register (MEI--D22:F0) Address Offset: 8Eh-8Fh Default Value: 0080h Bit 15:8 7 6:1 0 23.1.22 Reserved 64 Bit Address Capable (C64)--RO. Specifies that function is capable of generating 64-bit messages. Reserved MSI Enable (MSIE)--R/W. If set, MSI is enabled and traditional interrupt pins are not used to generate interrupts. MA--Message Signaled Interrupt Message Address Register (MEI--D22:F0) Bit 31:2 1:0 R/W, RO 32 bits Address (ADDR)--R/W. Lower 32 bits of the system specified message address, always DW aligned. Reserved MUA--Message Signaled Interrupt Upper Address Register (MEI--D22:F0) Bit 31:0 Attribute: Size: R/W 32 bits Description Upper Address (UADDR)--R/W. Upper 32 bits of the system specified message address, always DW aligned. MD--Message Signaled Interrupt Message Data Register (MEI--D22:F0) Address Offset: 98h-99h Default Value: 0000h Bit 15:0 896 Attribute: Size: Description Address Offset: 94h-97h Default Value: 00000000h 23.1.24 R/W, RO 16 bits Description Address Offset: 90h-93h Default Value: 00000000h 23.1.23 Attribute: Size: Attribute: Size: R/W 16 bits Description Data (DATA)--R/W. This 16-bit field is programmed by system software if MSI is enabled. Its content is driven during the data phase of the MSI memory write transaction. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.1.25 HIDM--MEI Interrupt Delivery Mode Register (MEI--D22:F0) Address Offset: A0h Default Value: 00h Bit 7:2 1 Attribute: Size: R/W 8 bits Description Reserved MEI Interrupt Delivery Mode (HIDM)--R/W. These bits control what type of interrupt the Intel MEI will send when ARC writes to set the M_IG bit in AUX space. They are interpreted as follows: 00 = Generate Legacy or MSI interrupt 01 = Generate SCI 10 = Generate SMI 0 23.1.26 Synchronous SMI Occurrence (SSMIO)--R/WC. This bit is used by firmware to indicate that a synchronous SMI source has been triggered. Host BIOS SMM handler can use this bit as status indication and clear it once processing is completed. A write of 1 from host SW clears this status bit. NOTE: It is possible that an async SMI has occurred prior to sync SMI occurrence and when the BIOS enters the SMM handler, it is possible that both bit 0 and bit 1 of this register could be set. HERES--MEI Extend Register Status (MEI--D22:F0) Address Offset: BCh-BFh Default Value: 00h Bit Attribute: Size: RO 32 bits Description Extend Register Valid (ERV). 31 Set by firmware after all firmware has been loaded. If ERA field is SHA-1, the result of the extend operation is in HER:5-1. If ERA field is SHA-256, the result of the extend operation is in HER:8-1. Extend Feature Present (EFP). 30 29:4 This bit is hardwired to 1 to allow driver software to easily detect the chipset supports the Extend Register FW measurement feature. Reserved Extend Register Algorithm (ERA). 3:0 This field indicates the hash algorithm used in the FW measurement extend operations. Encodings are: 0h = SHA-1 2h = SHA-256 Other values = Reserved. Datasheet 897 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.1.27 HERX--MEI Extend Register DWX (MEI--D22:F0) Address Offset: HER1: C0h-C3h HER2: C4h-C7h HER3: C8h-CBh HER4: CCh-CFh HER5: D0h-D3h HER6: D4h-D7h HER7: D8h-DBh HER8: DCh-DFh Default Value: 00000000h Bit Attribute: RO Size: 32 bits Description Extend Register DWX (ERDWX). Nth DWORD result of the extend operation. 31:0 898 NOTE: Extend Operation is HER[5:1] if using SHA-1. If using SHA-2 then Extend Operation is HER[8:1] Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.2 Second Management Engine Interface(MEI1) Configuration Registers (MEI--D22:F1) Table 23-1. MEI1 Configuration Registers Address Map (MEI--D22:F1) ) Offset Mnemonic Default Type 00h-01h VID Vendor Identification 8086h RO 02h-03h DID Device Identification See register description RO 04h-05h PCICMD PCI Command 0000h R/W, RO 06h-07h PCISTS PCI Status 0010h RO See register description RO 08h RID 09h-0Bh CC Class Code 0Eh HT Header Type 10h-17h MEI1_MBAR 2Ch-2Dh SVID 2Eh-2Fh SID 34h CAPP Capabilities List Pointer 3Ch-3Dh INTR MLMG 3Eh-3Fh Datasheet Register Name Revision Identification 0C8000h RO 00h RO 00000000 00000004h R/W, RO Subsystem Vendor ID 0000h R/WO Subsystem ID 0000h R/WO 50h RO Interrupt Information 0000h R/W, RO Maximum Latency/Minimum Grant 0000h RO RO MEI0 MMIO Base Address 40h-43h HFS Host Firmware Status 00000000h 48-4Bh GMES General ME Status 00000000h RO 4Ch-4Fh H_GS Host General Status 00000000h RO 50h-51h PID PCI Power Management Capability ID 6001h RO 52h-53h PC PCI Power Management Capabilities C803h RO 54h-55h PMCS PCI Power Management Control and Status 0008h R/WC, R/W, RO 8Ch-8Dh MID Message Signaled Interrupt Identifiers 0005h RO 8Eh-8Fh MC Message Signaled Interrupt Message Control 0080h R/W, RO 90h-93h MA Message Signaled Interrupt Message Address 00000000h R/W, RO 94h-97h MUA Message Signaled Interrupt Upper Address 00000000h R/W 98h-99h MD Message Signaled Interrupt Message Data 0000h R/W A0h HIDM MEI Interrupt Delivery Mode 00h R/W MEI Extended Register Status 40000000h RO MEI Extended Register DW[1:8] 00000000h RO BC-BF HERS C0-DF HER[1:8] 899 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.2.1 VID--Vendor Identification Register (MEI--D22:F1) Address Offset: 00h-01h Default Value: 8086h Bit 15:0 23.2.2 RO 16 bits Description Vendor ID (VID)--RO. This is a 16-bit value assigned to Intel. DID--Device Identification Register (MEI--D22:F1) Address Offset: 02h-03h Default Value: See bit description 23.2.3 Attribute: Size: Attribute: Size: RO 16 bits Bit Description 15:0 Device ID (DID)--RO. This is a 16-bit value assigned to the Intel Management Engine Interface controller. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register. PCICMD--PCI Command Register (MEI--D22:F1) Address Offset: 04h-05h Default Value: 0000h Bit 15:11 Attribute: Size: R/W, RO 16 bits Description Reserved 10 Interrupt Disable (ID)--R/W. Disables this device from generating PCI line based interrupts. This bit does not have any effect on MSI operation. 9:3 Reserved 2 Bus Master Enable (BME)--R/W. Controls the Intel MEI host controller's ability to act as a system memory master for data transfers. When this bit is cleared, Intel MEI bus master activity stops and any active DMA engines return to an idle condition. This bit is made visible to firmware through the H_PCI_CSR register, and changes to this bit may be configured by the H_PCI_CSR register to generate an ME MSI. When this bit is 0, Intel MEI is blocked from generating MSI to the host CPU. NOTE: This bit does not block Intel MEI accesses to ME-UMA; that is, writes or reads to the host and ME circular buffers through the read window and write window registers still cause ME backbone transactions to ME-UMA. Memory Space Enable (MSE)--R/W. Controls access to the Intel ME's memory mapped register space. 900 1 0 = Disable. Memory cycles within the range specified by the memory base and limit registers are master aborted. 1 = Enable. Allows memory cycles within the range specified by the memory base and limit registers accepted. 0 Reserved Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.2.4 PCISTS--PCI Status Register (MEI--D22:F1) Address Offset: 06h-07h Default Value: 0010h Attribute: Size: Bit 15:5 4 RO 16 bits Description Reserved Capabilities List (CL)--RO. Indicates the presence of a capabilities list, hardwired to 1. Interrupt Status--RO. Indicates the interrupt status of the device. 3 2:0 23.2.5 0 = Interrupt is de-asserted. 1 = Interrupt is asserted. Reserved RID--Revision Identification Register (MEI--D22:F1) Offset Address: 08h Default Value: See bit description Attribute: Size: Bit 7:0 23.2.6 Description (R) Revision ID--RO. See the Intel 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Revision ID Register CC--Class Code Register (MEI--D22:F1) Address Offset: 09h-0Bh Default Value: 078000h Bit 23:16 15:8 7:0 Datasheet RO 8 bits Attribute: Size: RO 24 bits Description Base Class Code (BCC)--RO. Indicates the base class code of the Intel MEI device. Sub Class Code (SCC)--RO. Indicates the sub class code of the Intel MEI device. Programming Interface (PI)--RO. Indicates the programming interface of the Intel MEI device. 901 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.2.7 HTYPE--Header Type Register (MEI--D22:F1) Address Offset: 0Eh Default Value: 80h RO 8 bits Bit Description 7 Multi-Function Device (MFD)--RO. Indicates the Intel MEI host controller is part of a multifunction device. 6:0 23.2.8 Attribute: Size: Header Layout (HL)--RO. Indicates that the Intel MEI uses a target device layout. MEI_MBAR--MEI MMIO Base Address Register (MEI--D22:F1) Address Offset: 10h-17h Default Value: 0000000000000004h Attribute: Size: R/W, RO 64 bits This register allocates space for the Intel MEI memory mapped registers. Bit Description 63:4 Base Address (BA)--R/W. Software programs this field with the base address of this region. 3 2:1 0 23.2.9 Prefetchable Memory (PM)--RO. Indicates that this range is not pre-fetchable. Type (TP)--RO. Set to 10b to indicate that this range can be mapped anywhere in 64bit address space. Resource Type Indicator (RTE)--RO. Indicates a request for register memory space. SVID--Subsystem Vendor ID Register (MEI--D22:F1) Address Offset: 2Ch-2Dh Default Value: 0000h 902 Attribute: Size: R/WO 16 bits Bit Description 15:0 Subsystem Vendor ID (SSVID)--R/WO. Indicates the sub-system vendor identifier. This field should be programmed by BIOS during boot-up. Once written, this register becomes Read Only. This field can only be cleared by PLTRST#. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.2.10 SID--Subsystem ID Register (MEI--D22:F1) Address Offset: 2Eh-2Fh Default Value: 0000h Bit 15:0 23.2.11 Subsystem ID (SSID)--R/WO. Indicates the sub-system identifier. This field should be programmed by BIOS during boot-up. Once written, this register becomes Read Only. This field can only be cleared by PLTRST#. CAPP--Capabilities List Pointer Register (MEI--D22:F1) Bit 7:0 RO 8 bits Capabilities Pointer (PTR)--RO. Indicates that the pointer for the first entry in the capabilities list is at 50h in configuration space. INTR--Interrupt Information Register (MEI--D22:F1) Bit 15:8 7:0 Attribute: Size: R/W, RO 16 bits Description Interrupt Pin (IPIN)--RO. This field indicates the interrupt pin the Intel MEI host controller uses. The value of 01h selects INTA# interrupt pin. Interrupt Line (ILINE)--R/W. Software written value to indicate which interrupt line (vector) the interrupt is connected to. No hardware action is taken on this register. HFS--Host Firmware Status Register (MEI--D22:F1) Address Offset: 40h-43h Default Value: 00000000h Bit 31:0 Datasheet Attribute: Size: Description Address Offset: 3Ch-3Dh Default Value: 0100h 23.2.13 R/WO 16 bits Description Address Offset: 34h Default Value: 50h 23.2.12 Attribute: Size: Attribute: Size: RO 32 bits Description Host Firmware Status (HFS)--RO. This register field is used by Firmware to reflect the operating environment to the host. 903 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.2.14 GMES--General ME Status Register (MEI--D22:F1) Address Offset: 48h-4Bh Default Value: 00000000h Bit 31:0 23.2.15 General ME Status(ME_GS)--RO. This field is populated by ME. H_GS--Host General Status Register (MEI--D22:F1) Bit 31:0 Attribute: Size: RO 32 bits Description Host General Status(H_GS)--RO. General Status of Host, this field is not used by Hardware PID--PCI Power Management Capability ID Register (MEI--D22:F1) Address Offset: 50h-51h Default Value: 6001h Attribute: Size: RO 16 bits Bit Description 15:8 Next Capability (NEXT)--RO. Value of 60h indicates the location of the next pointer. 7:0 904 RO 32 bits Description Address Offset: 4Ch-4Fh Default Value: 00000000h 23.2.16 Attribute: Size: Capability ID (CID)--RO. Indicates the linked list item is a PCI Power Management Register. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.2.17 PC--PCI Power Management Capabilities Register (MEI--D22:F1) Address Offset: 52h-53h Default Value: C803h RO 16 bits Bit Description 15:11 PME_Support (PSUP)--RO. This five-bit field indicates the power states in which the function may assert PME#. Intel MEI can assert PME# from any D-state except D1 or D2 which are not supported by Intel MEI. 10:9 8:6 Datasheet Attribute: Size: Reserved Aux_Current (AC)--RO. Reports the maximum Suspend well current required when in the D3cold state. Value of 00b is reported. 5 Device Specific Initialization (DSI)--RO. Indicates whether device-specific initialization is required. 4 Reserved 3 PME Clock (PMEC)--RO. Indicates that PCI clock is not required to generate PME#. 2:0 Version (VS)--RO. Hardwired to 011b to indicate support for Revision 1.2 of the PCI Power Management Specification. 905 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.2.18 PMCS--PCI Power Management Control and Status Register (MEI--D22:F1) Address Offset: 54h-55h Default Value: 0008h Bit 15 Attribute: Size: R/WC, R/W, RO 16 bits Description PME Status (PMES)--R/WC. Bit is set by ME Firmware. Host software clears bit by writing 1 to bit. This bit is reset when CL_RST1# asserted. 14:9 8 Reserved PME Enable (PMEE)--R/W. This bit is read/write and is under the control of host SW. It does not directly have an effect on PME events. However, this bit is shadowed so ME FW can monitor it. ME FW will not cause the PMES bit to transition to 1 while the PMEE bit is 0, indicating that host SW had disabled PME. This bit is reset when PLTRST# asserted. 7:4 Reserved 3 No_Soft_Reset (NSR)--RO. This bit indicates that when the Intel MEI host controller is transitioning from D3hot to D0 due to a power state command, it does not perform an internal reset. Configuration context is preserved. 2 Reserved Power State (PS)--R/W. This field is used both to determine the current power state of the Intel MEI host controller and to set a new power state. The values are: 00 = D0 state (default) 1:0 11 = D3hot state The D1 and D2 states are not supported for the Intel MEI host controller. When in the D3hot state, the Intel ME's configuration space is available, but the register memory spaces are not. Additionally, interrupts are blocked. 23.2.19 MID--Message Signaled Interrupt Identifiers Register (MEI--D22:F1) Address Offset: 8Ch-8Dh Default Value: 0005h RO 16 bits Bit Description 15:8 Next Pointer (NEXT)--RO. Value of 00h indicates that this is the last item in the list. 7:0 906 Attribute: Size: Capability ID (CID)--RO. Capabilities ID indicates MSI. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.2.20 MC--Message Signaled Interrupt Message Control Register (MEI--D22:F1) Address Offset: 8Eh-8Fh Default Value: 0080h Bit 15:8 7 6:1 0 23.2.21 Reserved 64 Bit Address Capable (C64)--RO. Specifies that function is capable of generating 64-bit messages. Reserved MSI Enable (MSIE)--R/W. If set, MSI is enabled and traditional interrupt pins are not used to generate interrupts. MA--Message Signaled Interrupt Message Address Register (MEI--D22:F1) Bit 31:2 1:0 R/W, RO 32 bits Address (ADDR)--R/W. Lower 32 bits of the system specified message address, always DW aligned. Reserved MUA--Message Signaled Interrupt Upper Address Register (MEI--D22:F1) Bit 31:0 Attribute: Size: R/W 32 bits Description Upper Address (UADDR)--R/W. Upper 32 bits of the system specified message address, always DW aligned. MD--Message Signaled Interrupt Message Data Register (MEI--D22:F1) Address Offset: 98h-99h Default Value: 0000h Bit 15:0 Datasheet Attribute: Size: Description Address Offset: 94h-97h Default Value: 00000000h 23.2.23 R/W, RO 16 bits Description Address Offset: 90h-93h Default Value: 00000000h 23.2.22 Attribute: Size: Attribute: Size: R/W 16 bits Description Data (DATA)--R/W. This 16-bit field is programmed by system software if MSI is enabled. Its content is driven during the data phase of the MSI memory write transaction. 907 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.2.24 HIDM--MEI Interrupt Delivery Mode Register (MEI--D22:F1) Address Offset: A0h Default Value: 00h Bit 7:2 1 Attribute: Size: R/W 8 bits Description Reserved Intel MEI Interrupt Delivery Mode (HIDM)--R/W. These bits control what type of interrupt the Intel MEI will send when ARC writes to set the M_IG bit in AUX space. They are interpreted as follows: 00 = Generate Legacy or MSI interrupt 01 = Generate SCI 10 = Generate SMI 0 23.2.25 Synchronous SMI Occurrence (SSMIO)--R/WC. This bit is used by firmware to indicate that a synchronous SMI source has been triggered. Host BIOS SMM handler can use this bit as status indication and clear it once processing is completed. A write of 1 from host SW clears this status bit. NOTE: It is possible that an async SMI has occurred prior to sync SMI occurrence and when the BIOS enters the SMM handler, it is possible that both bit 0 and bit 1 of this register could be set. HERES--MEI Extend Register Status (MEI--D22:F1) Address Offset: BCh-BFh Default Value: 00h Attribute: Size: RO 32 bits Bit Description 31 Extend Register Valid (ERV). Set by firmware after all firmware has been loaded. If ERA field is SHA-1, the result of the extend operation is in HER:5-1. If ERA field is SHA256, the result of the extend operation is in HER:8-1. 30 Extend Feature Present (EFP). This bit is hardwired to 1 to allow driver software to easily detect the chipset supports the Extend Register FW measurement feature. 29:4 Reserved Extend Register Algorithm (ERA). This field indicates the hash algorithm used in the FW measurement extend operations. Encodings are: 3:0 0h = SHA-1 2h = SHA-256 Other values = Reserved. 908 Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.2.26 HERX--MEI Extend Register DWX (MEI--D22:F1) Address Offset: HER1: C0h-C3h HER2: C4h-C7h HER3: C8h-CBh HER4: CCh-CFh HER5: D0h-D3h HER6: D4h-D7h HER7: D8h-DBh HER8: DCh-DFh Default Value: 00000000h Bit Attribute: RO Size: 32 bits Description Extend Register DWX (ERDWX): 31:0 Xth DWORD result of the extend operation. NOTE: Extend Operation is HER[5:1] if using SHA-1. If using SHA-2, then Extend Operation is HER[8:1] 23.3 MEI0_MBAR--MEI0 MMIO Registers These MMIO registers are accessible starting at the MEI MMIO Base Address (MEI_MBAR) which gets programmed into D22:F0:Offset 10-17h. These registers are reset by PLTRST# unless otherwise noted. Table 23-2. MEI MMIO Register Address Map (VE--D23:F0) Datasheet MEI_MBAR+Of fset Mnemonic 00-03h H_CB_WW 04h-07h H_CSR 08h-0Bh 0Ch-0Fh Register Name Default Type Host Circular Buffer Write Window 00000000h RO Host Control Status 02000000h R/W, R/WC, RO ME_CB_RW ME Circular Buffer Read Window 00000000h RO ME CSR_HA ME Control Status Host Access 02000000h RO 909 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.3.1 H_CB_WW--Host Circular Buffer Write Window Register (MEI MMIO Register) Address Offset: MEI0_MBAR + 00h Default Value: 00000000h 23.3.2 Attribute: Size: Bit Description 31:0 Host Circular Buffer Write Window Field (H_CB_WWF). This bit field is for host to write into its circular buffer. The host's circular buffer is located at the ME subsystem address specified in the Host CB Base Address register. This field is write only, reads will return arbitrary data. Writes to this register will increment the H_CBWP as long as ME_RDY is 1. When ME_RDY is 0, writes to this register have no effect and are not delivered to the H_CB, nor is H_CBWP incriminated. H_CSR--Host Control Status Register (MEI MMIO Register) Address Offset: MEI0_MBAR + 04h Default Value: 02000000h Bit 31:24 Attribute: Size: RO 32 bits Description Host Circular Buffer Depth (H_CBD)--RO. This field indicates the maximum number of 32 bit entries available in the host circular buffer (H_CB). Host software uses this field along with the H_CBRP and H_CBWP fields to calculate the number of valid entries in the H_CB to read or # of entries available for write. This field is implemented with a "1-hot" scheme. Only one bit will be set to a "1" at a time. Each bit position represents the value n of a buffer depth of (2^n). For example, when bit# 1 is 1, the buffer depth is 2; when bit#2 is 1, the buffer depth is 4, etc. The allowed buffer depth values are 2, 4, 8, 16, 32, 64 and 128. 23:16 Host CB Write Pointer (H_CBWP). Points to next location in the H_CB for host to write the data. Software uses this field along with H_CBRP and H_CBD fields to calculate the number of valid entries in the H_CB to read or number of entries available for write. 15:8 Host CB Read Pointer (H_CBRP). Points to next location in the H_CB where a valid data is available for embedded controller to read. Software uses this field along with H_CBWR and H_CBD fields to calculate the number of valid entries in the host CB to read or number of entries available for write. 7:5 910 RO 32 bits Reserved Must be programmed to zero 4 Host Reset (H_RST). Setting this bit to 1 will initiate a Intel MEI reset sequence to get the circular buffers into a known good state for host and ME communication. When this bit transitions from 0 to 1, hardware will clear the H_RDY and ME_RDY bits. 3 Host Ready (H_RDY). This bit indicates that the host is ready to process messages. 2 Host Interrupt Generate (H_IG). Once message(s) are written into its CB, the host sets this bit to one for the HW to set the ME_IS bit in the ME_CSR and to generate an interrupt message to ME. HW will send the interrupt message to ME only if the ME_IE is enabled. HW then clears this bit to 0. 1 Host Interrupt Status (H_IS). Hardware sets this bit to 1 when ME_IG bit is set to 1. Host clears this bit to 0 by writing a 1 to this bit position. H_IE has no effect on this bit. 0 Host Interrupt Enable (H_IE). Host sets this bit to 1 to enable the host interrupt (INTR# or MSI) to be asserted when H_IS is set to 1. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.3.3 ME_CB_RW--ME Circular Buffer Read Window Register (MEI MMIO Register) Address Offset: MEI0_MBAR + 08h Default Value: FFFFFFFFh 23.3.4 RO 32 bits Bit Description 31:0 ME Circular Buffer Read Window Field (ME_CB_RWF). This bit field is for host to read from the ME Circular Buffer. The ME's circular buffer is located at the ME subsystem address specified in the ME CB Base Address register. This field is read only, writes have no effect. Reads to this register will increment the ME_CBRP as long as ME_RDY is 1. When ME_RDY is 0, reads to this register have no effect, all 1s are returned, and ME_CBRP is not incremented. ME CSR_HA--ME Control Status Host Access Register (MEI MMIO Register) Address Offset: MEI0_MBAR + 0Ch Default Value: 02000000h Bit 31:24 23:16 15:8 7:5 4 3 2 1 0 Datasheet Attribute: Size: Attribute: Size: RO 32 bits Description ME Circular Buffer Depth Host Read Access (ME_CBD_HRA). Host read only access to ME_CBD. ME CB Write Pointer Host Read Access (ME_CBWP_HRA). Host read only access to ME_CBWP. ME CB Read Pointer Host Read Access (ME_CBRP_HRA). Host read only access to ME_CBRP. Reserved ME Reset Host Read Access (ME_RST_HRA). Host read access to ME_RST. ME Ready Host Read Access (ME_RDY_HRA): Host read access to ME_RDY. ME Interrupt Generate Host Read Access (ME_IG_HRA). Host read only access to ME_IG. ME Interrupt Status Host Read Access (ME_IS_HRA). Host read only access to ME_IS. ME Interrupt Enable Host Read Access (ME_IE_HRA). Host read only access to ME_IE. 911 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.4 MEI1_MBAR--MEI0 MMIO Registers These MMIO registers are accessible starting at the MEI1 MMIO Base Address (MEI1_MBAR) which gets programmed into D22:F1:Offset 10-17h. These registers are reset by PLTRST# unless otherwise noted. Table 23-3. MEI MMIO Register Address Map (VE--D23:F0) MEI_MBAR + Offset Mnemonic Register Name Default 00-03h H_CB_WW Host Circular Buffer Write Window 00000000h RO 02000000h R/W, R/WC, RO 04h-07h 23.4.1 H_CSR Host Control Status 08h-0Bh ME_CB_RW ME Circular Buffer Read Window 00000000h RO 0Ch-0Fh ME CSR_HA ME Control Status Host Access 02000000h RO H_CB_WW--Host Circular Buffer Write Window Register (MEI MMIO Register) Address Offset: MEI1_MBAR + 00h Default Value: 00000000h 912 Type Attribute: Size: RO 32 bits Bit Description 31:0 Host Circular Buffer Write Window Field (H_CB_WWF). This bit field is for host to write into its circular buffer. The host's circular buffer is located at the ME subsystem address specified in the Host CB Base Address register. This field is write only, reads will return arbitrary data. Writes to this register will increment the H_CBWP as long as ME_RDY is 1. When ME_RDY is 0, writes to this register have no effect and are not delivered to the H_CB, nor is H_CBWP incremented. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.4.2 H_CSR--Host Control Status Register (MEI MMIO Register) Address Offset: MEI1_MBAR + 04h Default Value: 02000000h Bit Attribute: Size: RO 32 bits Description Host Circular Buffer Depth (H_CBD)--RO. This field indicates the maximum number of 32 bit entries available in the host circular buffer (H_CB). Host software uses this field along with the H_CBRP and H_CBWP fields to calculate the number of valid entries in the H_CB to read or # of entries available for write. 31:24 NOTE: This field is implemented with a "1-hot" scheme. Only one bit will be set to a 1 at a time. Each bit position represents the value n of a buffer depth of (2^n). For example, when bit# 1 is 1, the buffer depth is 2; when bit#2 is 1, the buffer depth is 4, etc. The allowed buffer depth values are 2, 4, 8, 16, 32, 64 and 128. 23:16 Host CB Write Pointer (H_CBWP). Points to next location in the H_CB for host to write the data. Software uses this field along with H_CBRP and H_CBD fields to calculate the number of valid entries in the H_CB to read or number of entries available for write. 15:8 Host CB Read Pointer (H_CBRP). Points to next location in the H_CB where a valid data is available for embedded controller to read. Software uses this field along with H_CBWR and H_CBD fields to calculate the number of valid entries in the host CB to read or number of entries available for write. 7:5 Datasheet Reserved Must be programmed to zero 4 Host Reset (H_RST). Setting this bit to 1 will initiate a Intel MEI reset sequence to get the circular buffers into a known good state for host and ME communication. When this bit transitions from 0 to 1, hardware will clear the H_RDY and ME_RDY bits. 3 Host Ready (H_RDY). This bit indicates that the host is ready to process messages. 2 Host Interrupt Generate (H_IG). Once message(s) are written into its CB, the host sets this bit to one for the HW to set the ME_IS bit in the ME_CSR and to generate an interrupt message to ME. HW will send the interrupt message to ME only if the ME_IE is enabled. HW then clears this bit to 0. 1 Host Interrupt Status (H_IS). Hardware sets this bit to 1 when ME_IG bit is set to 1. Host clears this bit to 0 by writing a 1 to this bit position. H_IE has no effect on this bit. 0 Host Interrupt Enable (H_IE). Host sets this bit to 1 to enable the host interrupt (INTR# or MSI) to be asserted when H_IS is set to 1. 913 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.4.3 ME_CB_RW--ME Circular Buffer Read Window Register (MEI MMIO Register) Address Offset: MEI1_MBAR + 08h Default Value: FFFFFFFFh 23.4.4 RO 32 bits Bit Description 31:0 ME Circular Buffer Read Window Field (ME_CB_RWF). This bit field is for host to read from the ME Circular Buffer. The ME's circular buffer is located at the ME subsystem address specified in the ME CB Base Address register. This field is read only, writes have no effect. Reads to this register will increment the ME_CBRP as long as ME_RDY is 1. When ME_RDY is 0, reads to this register have no effect, all 1s are returned, and ME_CBRP is not incremented. ME CSR_HA--ME Control Status Host Access Register (MEI MMIO Register) Address Offset: MEI1_MBAR + 0Ch Default Value: 02000000h Bit 31:24 23:16 15:8 7:5 4 3 2 1 0 914 Attribute: Size: Attribute: Size: RO 32 bits Description ME Circular Buffer Depth Host Read Access (ME_CBD_HRA). Host read only access to ME_CBD. ME CB Write Pointer Host Read Access (ME_CBWP_HRA). Host read only access to ME_CBWP. ME CB Read Pointer Host Read Access (ME_CBRP_HRA). Host read only access to ME_CBRP. Reserved ME Reset Host Read Access (ME_RST_HRA). Host read access to ME_RST. ME Ready Host Read Access (ME_RDY_HRA). Host read access to ME_RDY. ME Interrupt Generate Host Read Access (ME_IG_HRA). Host read only access to ME_IG. ME Interrupt Status Host Read Access (ME_IS_HRA). Host read only access to ME_IS. ME Interrupt Enable Host Read Access (ME_IE_HRA). Host read only access to ME_IE. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.5 IDE Function for Remote Boot and Installations PT IDER Registers (IDER--D22:F2) Table 23-4. IDE Function for remote boot and Installations PT IDER Register Address Map Datasheet Address Offset Register Symbol 00h-01h VID 02h-03h DID 04h-05h PCICMD 06h-07h PCISTS Default Value Attribute Vendor Identification 8086h RO Device Identification See register description RO PCI Command 0000h RO, R/W PCI Status 00B0h RO RO Register Name 08h RID Revision ID See register description 09-0Bh CC Class Codes 010185h RO 0Ch CLS Cache Line Size 00h RO Primary Latency Timer 0Dh PLT 00h RO 10-13h PCMDBA Primary Command Block IO Bar 00000001h RO, R/W 14-17h PCTLBA Primary Control Block Base Address 00000001h RO, R/W 18-1Bh SCMDBA Secondary Command Block Base Address 00000001h RO, R/W 1C-1Fh SCTLBA 20-23h LBAR 2C-2Fh SS 30-33h EROM Secondary Control Block base Address 00000001h RO, R/W Legacy Bus Master Base Address 00000001h RO, R/W Sub System Identifiers 00008086h R/WO Expansion ROM Base Address 00000000h RO 34h CAP Capabilities Pointer C8h RO 3C-3Dh INTR Interrupt Information 0300h R/W, RO C8-C9h PID PCI Power Management Capability ID D001h RO CA-CBh PC PCI Power Management Capabilities 0023h RO CC-CFh PMCS 00000000h RO, R/W, RO/V D0-D1h MID Message Signaled Interrupt Capability ID 0005h RO D2-D3h MC Message Signaled Interrupt Message Control 0080h RO, R/W D4-D7h MA Message Signaled Interrupt Message Address 00000000h R/W, RO D8-DBh MAU Message Signaled Interrupt Message Upper Address 00000000h RO, R/W DC-DDh MD Message Signaled Interrupt Message Data 0000h R/W PCI Power Management Control and Status 915 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.5.1 VID--Vendor Identification Register (IDER--D22:F2) Address Offset: 00-01h Default Value: 8086h Bit 15:0 23.5.2 Vendor ID (VID)--RO. This is a 16-bit value assigned by Intel. DID--Device Identification Register (IDER--D22:F2) Attribute: Size: RO 16 bits Bit Description 15:0 Device ID (DID)--RO. This is a 16-bit value assigned to the PCH IDER controller. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register. PCICMD--PCI Command Register (IDER--D22:F2) Address Offset: 04-05h Default Value: 0000h Bit 15:11 916 RO 16 bits Description Address Offset: 02-03h Default Value: See bit description 23.5.3 Attribute: Size: Attribute: Size: RO, R/W 16 bits Description Reserved 10 Interrupt Disable (ID)--R/W. This disables pin-based INTx# interrupts. This bit has no effect on MSI operation. When set, internal INTx# messages will not be generated. When cleared, internal INTx# messages are generated if there is an interrupt and MSI is not enabled. 9:3 Reserved 2 Bus Master Enable (BME)--RO. This bit controls the PT function's ability to act as a master for data transfers. This bit does not impact the generation of completions for split transaction commands. 1 Memory Space Enable (MSE)--RO. PT function does not contain target memory space. 0 I/O Space enable (IOSE)--RO. This bit controls access to the PT function's target I/O space. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.5.4 PCISTS--PCI Device Status Register (IDER--D22:F2) Address Offset: 06-07h Default Value: 00B0h Bit 15:11 10:9 8:5 Description Reserved DEVSEL# Timing Status (DEVT)--RO. This bit controls the device select time for the PT function's PCI interface. Reserved Capabilities List (CL)--RO. This bit indicates that there is a capabilities pointer implemented in the device. 3 Interrupt Status (IS)--RO. This bit reflects the state of the interrupt in the function. Setting of the Interrupt Disable bit to 1 has no affect on this bit. Only when this bit is a 1 and ID bit is 0 is the INTc interrupt asserted to the Host. Reserved RID--Revision Identification Register (IDER--D22:F2) Address Offset: 08h Default Value: See bit description Bit 7:0 23.5.6 Attribute: Size: RO 8 bits Description Revision ID--RO. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register. CC--Class Codes Register (IDER--D22:F2) Address Offset: 09-0Bh Default Value: 010185h Bit 23:16 Datasheet RO 16 bits 4 2:0 23.5.5 Attribute: Size: Attribute: Size: RO 24 bits Description Base Class Code (BCC)--RO This field indicates the base class code of the IDER host controller device. 15:8 Sub Class Code (SCC)--RO This field indicates the sub class code of the IDER host controller device. 7:0 Programming Interface (PI)--RO This field indicates the programming interface of the IDER host controller device. 917 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.5.7 CLS--Cache Line Size Register (IDER--D22:F2) Address Offset: 0Ch Default Value: 00h Bit 7:0 23.5.8 Cache Line Size (CLS)--RO. All writes to system memory are Memory Writes. PCMDBA--Primary Command Block IO Bar Register (IDER--D22:F2) Bit 31:16 15:3 2:1 0 Attribute: Size: RO, R/W 32 bits Description Reserved Base Address (BAR)--R/W Base Address of the BAR0 I/O space (8 consecutive I/O locations). Reserved Resource Type Indicator (RTE)--RO. This bit indicates a request for I/O space. PCTLBA--Primary Control Block Base Address Register (IDER--D22:F2) Address Offset: 14-17h Default Value: 00000001h Bit 31:16 15:2 918 RO 8 bits Description Address Offset: 10-13h Default Value: 00000001h 23.5.9 Attribute: Size: Attribute: Size: RO, R/W 32 bits Description Reserved Base Address (BAR)--R/W. Base Address of the BAR1 I/O space (4 consecutive I/O locations) 1 Reserved 0 Resource Type Indicator (RTE)--RO. This bit indicates a request for I/O space Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.5.10 SCMDBA--Secondary Command Block Base Address Register (IDER--D22:F2) Address Offset: 18-1Bh Default Value: 00000001h Bit 31:16 15:3 2:1 0 23.5.11 Reserved Base Address (BAR)--R/W. Base Address of the I/O space (8 consecutive I/O locations). Reserved Resource Type Indicator (RTE)--RO. This bit indicates a request for I/O space. SCTLBA--Secondary Control Block base Address Register (IDER--D22:F2) Bit 31:16 15:2 Attribute: Size: RO, R/W 32 bits Description Reserved Base Address (BAR)--R/W. Base Address of the I/O space (4 consecutive I/O locations). 1 Reserved 0 Resource Type Indicator (RTE)--RO. This bit indicates a request for I/O space. LBAR--Legacy Bus Master Base Address Register (IDER--D22:F2) Address Offset: 20-23h Default Value: 00000001h Bit 31:16 15:4 3:1 0 Datasheet RO, R/W 32 bits Description Address Offset: 1C-1Fh Default Value: 00000001h1 23.5.12 Attribute: Size: Attribute: Size: RO, R/W 32 bits Description Reserved Base Address (BA)--R/W. Base Address of the I/O space (16 consecutive I/O locations). Reserved Resource Type Indicator (RTE)--RO. This bit indicates a request for I/O space. 919 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.5.13 SVID--Subsystem Vendor ID Register (IDER--D22:F2) Address Offset: 2Ch-2Dh Default Value: 0000h 23.5.14 Attribute: Size: Bit Description 15:0 Subsystem Vendor ID (SSVID)--R/WO. Indicates the sub-system vendor identifier. This field should be programmed by BIOS during boot-up. Once written, this register becomes Read Only. This field can only be cleared by PLTRST#. SID--Subsystem ID Register (IDER--D22:F2) Address Offset: 2Eh-2Fh Default Value: 8086h Attribute: Size: Bit 15:0 23.5.15 Subsystem ID (SSID)--R/WO. Indicates the sub-system identifier. This field should be programmed by BIOS during boot-up. Once written, this register becomes Read Only. This field can only be cleared by PLTRST#. CAPP--Capabilities List Pointer Register (IDER--D22:F2) Attribute: Size: RO 8 bits Bit Description 7:0 Capability Pointer (CP)--R/WO. This field indicates that the first capability pointer is offset C8h (the power management capability). INTR--Interrupt Information Register (IDER--D22:F2) Address Offset: 3C-3Dh Attribute: Default Value: 0300h Bit 15:8 7:0 920 R/WO 16 bits Description Address Offset: 34h Default Value: C8h 23.5.16 R/WO 16 bits R/W, RO Size: 16 bits Description Interrupt Pin (IPIN)--RO. A value of 1h/2h/3h/4h indicates that this function implements legacy interrupt on INTA/INTB/INTC/INTD, respectively Function Value INTx (2 IDE) 03h INTC Interrupt Line (ILINE)--R/W. The value written in this register indicates which input of the system interrupt controller, the device's interrupt pin is connected to. This value is used by the OS and the device driver, and has no affect on the hardware. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.5.17 PID--PCI Power Management Capability ID Register (IDER--D22:F2) Address Offset: Default Value: C8-C9h D001h Bit 15:8 7:0 23.5.18 RO 16 bits Description Next Capability (NEXT)--RO. Its value of D0h points to the MSI capability. Cap ID (CID)--RO. This field indicates that this pointer is a PCI power management. PC--PCI Power Management Capabilities Register (IDER--D22:F2) Address Offset: Default Value: CA-CBh 0023h Attribute: Size: RO 16 bits Bit Description 15:11 PME_Support (PSUP)--RO. This five-bit field indicates the power states in which the function may assert PME#. IDER can assert PME# from any D-state except D1 or D2 which are not supported by IDER. 10:9 8:6 5 Datasheet Attribute: Size: Reserved Aux_Current (AC)--RO. Reports the maximum Suspend well current required when in the D3cold state. Value of 00b is reported. Device Specific Initialization (DSI)--RO. Indicates whether device-specific initialization is required. 4 Reserved 3 PME Clock (PMEC)--RO. Indicates that PCI clock is not required to generate PME#. 2:0 Version (VS)--RO. Hardwired to 011b to indicate support for Revision 1.2 of the PCI Power Management Specification. 921 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.5.19 PMCS--PCI Power Management Control and Status Register (IDER--D22:F2) Address Offset: Default Value: CC-CFh 00000000h Bit 31:4 Attribute: Size: RO, R/W 32 bits Description Reserved No Soft Reset (NSR)--RO. When set to 1, this bit indicates that devices transitioning from D3hot to D0 because of PowerState commands do not perform an internal reset. Configuration Context is preserved. Upon transition from the D3hot to the D0 Initialized state, no additional operating system intervention is required to preserve Configuration Context beyond writing the PowerState bits. 3 When cleared to 0, devices do perform an internal reset upon transitioning from D3hot to D0 via software control of the PowerState bits. Configuration Context is lost when performing the soft reset. Upon transition from the D3hot to the D0 state, full re-initialization sequence is needed to return the device to D0 Initialized. Value in this bit is reflects chicken bit in ME-AUX register x13900, bit [7] which is as follows: 0 = Device performs internal reset 1 = Device does not perform internal reset 2 Reserved Power State (PS)--R/W. This field is used both to determine the current power state of the PT function and to set a new power state. The values are: 00 = D0 state 1:0 11 = D3HOT state When in the D3HOT state, the controller's configuration space is available, but the I/O and memory spaces are not. Additionally, interrupts are blocked. If software attempts to write a '10' or '01' to these bits, the write will be ignored. 23.5.20 MID--Message Signaled Interrupt Capability ID Register (IDER--D22:F2) Address Offset: D0-D1h Default Value: 0005h Bit 15:8 7:0 922 Attribute: Size: RO 16 bits Description Next Pointer (NEXT)--RO. This value indicates this is the last item in the capabilities list. Capability ID (CID)--RO. The Capabilities ID value indicates device is capable of generating an MSI. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.5.21 MC--Message Signaled Interrupt Message Control Register (IDER--D22:F2) Address Offset: D2-D3h Default Value: 0080h Bit 15:8 7 Description Reserved 64 Bit Address Capable (C64)--RO. Capable of generating 64-bit and 32-bit messages. Multiple Message Enable (MME)--R/W. These bits are R/W for software compatibility, but only one message is ever sent by the PT function. 3:1 Multiple Message Capable (MMC)--RO. Only one message is required. MSI Enable (MSIE)--R/W. If set, MSI is enabled and traditional interrupt pins are not used to generate interrupts. MA--Message Signaled Interrupt Message Address Register (IDER--D22:F2) Address Offset: D4-D7h Default Value: 00000000h R/W, RO 32 bits Description 31:2 Address (ADDR)--R/W. This field contains the Lower 32 bits of the system specified message address, always DWord aligned Reserved MAU--Message Signaled Interrupt Message Upper Address Register (IDER--D22:F2) Address Offset: D8-DBh Default Value: 00000000h Bit 31:4 3:0 Datasheet Attribute: Size: Bit 1:0 23.5.23 RO, R/W 16 bits 6:4 0 23.5.22 Attribute: Size: Attribute: Size: RO, R/W 32 bits Description Reserved Address (ADDR)--R/W. This field contains the Upper 4 bits of the system specified message address. 923 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.5.24 MD--Message Signaled Interrupt Message Data Register (IDER--D22:F2) Address Offset: DC-DDh Default Value: 0000h 23.6 Attribute: Size: R/W 16 bits Bit Description 15:0 Data (DATA)--R/W. This content is driven onto the lower word of the data bus of the MSI memory write transaction. IDE BAR0 Table 23-5. IDE BAR0 Register Address Map 924 Default Value Attribute IDE Data Register 00h R/W IDEERD1 IDE Error Register DEV1 00h R/W IDEERD0 IDE Error Register DEV0 00h R/W IDE Features Register 00h R/W IDE Sector Count In Register 00h R/W IDESCOR1 IDE Sector Count Out Register Device 1 00h R/W IDESCOR0 IDE Sector Count Out Register Device 0 00h R/W 3h IDESNOR0 IDE Sector Number Out Register Device 0 00h R/W 3h IDESNOR1 IDE Sector Number Out Register Device 1 00h R/W 3h IDESNIR IDE Sector Number In Register 00h R/W 4h IDECLIR IDE Cylinder Low In Register 00h R/W 4h IDCLOR1 IDE Cylinder Low Out Register Device 1 00h R/W 4h IDCLOR0 IDE Cylinder Low Out Register Device 0 00h R/W 5h IDCHOR0 IDE Cylinder High Out Register Device 0 00h R/W 5h IDCHOR1 IDE Cylinder High Out Register Device 1 00h R/W 5h IDECHIR IDE Cylinder High In Register 00h R/W 6h IDEDHIR IDE Drive/Head In Register 00h R/W 6h IDDHOR1 IDE Drive Head Out Register Device 1 00h R/W 6h IDDHOR0 IDE Drive Head Out Register Device 0 00h R/W 7h IDESD0R IDE Status Device 0 Register 80h R/W 7h IDESD1R IDE Status Device 1 Register 80h R/W 7h IDECR IDE Command Register 00h R/W Address Offset Register Symbol 0h IDEDATA 1h 1h 1h IDEFR 2h IDESCIR 2h 2h Register Name Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.6.1 IDEDATA--IDE Data Register (IDER--D22:F2) Address Offset: 0h Default Value: 00h Attribute: Size: R/W 8 bits The IDE data interface is a special interface that is implemented in the HW. This data interface is mapped to IO space from the host and takes read and write cycles from the host targeting master or slave device. Writes from host to this register result in the data being written to ME memory. Reads from host to this register result in the data being fetched from ME memory. Data is typically written/ read in WORDs. ME-FW must enable hardware to allow it to accept Host initiated Read/ Write cycles, else the cycles are dropped. 23.6.2 Bit Description 7:0 IDE Data Register (IDEDR)--R/W. Data Register implements the data interface for IDE. All writes and reads to this register translate into one or more corresponding write/reads to ME memory IDEERD1--IDE Error Register DEV1 (IDER--D22:F2) Address Offset: 01h Default Value: 00h Attribute: Size: R/W 8 bits This register implements the Error register of the command block of the IDE function. This register is read only by the HOST interface when DEV = 1 (slave device). 23.6.3 Bit Description 7:0 IDE Error Data (IDEED)--R/W. Drive reflects its error/ diagnostic code to the host via this register at different times. IDEERD0--IDE Error Register DEV0 (IDER--D22:F2) Address Offset: 01h Default Value: 00h Attribute: Size: R/W 8 bits This register implements the Error register of the command block of the IDE function. This register is read only by the HOST interface when DEV = 0 (master device). Datasheet Bit Description 7:0 IDE Error Data (IDEED)--R/W. Drive reflects its error/ diagnostic code to the host via this register at different times. 925 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.6.4 IDEFR--IDE Features Register (IDER--D22:F2) Address Offset: 01h Default Value: 00h Attribute: Size: R/W 8 bits This register implements the Feature register of the command block of the IDE function. This register can be written only by the Host. When the HOST reads the same address, it reads the Error register of Device 0 or Device 1 depending on the device_select bit (bit 4 of the drive/head register). Bit 7:0 23.6.5 Description IDE Feature Data (IDEFD)--R/W. IDE drive specific data written by the Host IDESCIR--IDE Sector Count In Register (IDER--D22:F2) Address Offset: 02h Default Value: 00h Attribute: Size: R/W 8 bits This register implements the Sector Count register of the command block of the IDE function. This register can be written only by the Host. When host writes to this register, all 3 registers (IDESCIR, IDESCOR0, IDESCOR1) are updated with the written value. A host read to this register address reads the IDE Sector Count Out Register IDESCOR0 if DEV=0 or IDESCOR1 if DEV=1 Bit 7:0 23.6.6 Description IDE Sector Count Data (IDESCD)--R/W. Host writes the number of sectors to be read or written. IDESCOR1--IDE Sector Count Out Register Device 1 Register (IDER--D22:F2) Address Offset: 02h Default Value: 00h Attribute: Size: R/W 8 bits This register is read by the HOST interface if DEV = 1. ME-Firmware writes to this register at the end of a command of the selected device. When the host writes to this address, the IDE Sector Count In Register (IDESCIR), this register is updated. Bit 7:0 926 Description IDE Sector Count Out Dev1 (ISCOD1)--R/W. Sector Count register for Slave Device (that is, Device 1) Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.6.7 IDESCOR0--IDE Sector Count Out Register Device 0 Register (IDER--D22:F2) Address Offset: 02h Default Value: 00h Attribute: Size: R/W 8 bits This register is read by the HOST interface if DEV = 0. ME-Firmware writes to this register at the end of a command of the selected device. When the host writes to this address, the IDE Sector Count In Register (IDESCIR), this register is updated. Bit 7:0 23.6.8 Description IDE Sector Count Out Dev0 (ISCOD0)--R/W. Sector Count register for Master Device (that is, Device 0). IDESNOR0--IDE Sector Number Out Register Device 0 Register (IDER--D22:F2) Address Offset: 03h Default Value: 00h Attribute: Size: R/W 8 bits This register is read by the Host if DEV = 0. ME-Firmware writes to this register at the end of a command of the selected device. When the host writes to the IDE Sector Number In Register (IDESNIR), this register is updated with that value. 23.6.9 Bit Description 7:0 IDE Sector Number Out DEV 0 (IDESNO0)--R/W. Sector Number Out register for Master device. IDESNOR1--IDE Sector Number Out Register Device 1 Register (IDER--D22:F2) Address Offset: 03h Default Value: 00h Attribute: Size: R/W 8 bits This register is read by the Host if DEV = 1. ME-Firmware writes to this register at the end of a command of the selected device. When the host writes to the IDE Sector Number In Register (IDESNIR), this register is updated with that value. Datasheet Bit Description 7:0 IDE Sector Number Out DEV 1 (IDESNO1)--R/W. Sector Number Out register for Slave device. 927 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.6.10 IDESNIR--IDE Sector Number In Register Register (IDER--D22:F2) Address Offset: 03h Default Value: 00h Attribute: Size: R/W 8 bits This register implements the Sector Number register of the command block of the IDE function. This register can be written only by the Host. When host writes to this register, all 3 registers (IDESNIR, IDESNOR0, IDESNOR1) are updated with the written value. Host read to this register address reads the IDE Sector Number Out Register IDESNOR0 if DEV=0 or IDESNOR1 if DEV=1. Bit 7:0 23.6.11 Description IDE Sector Number Data (IDESND)--R/W. This register contains the number of the first sector to be transferred. IDECLIR--IDE Cylinder Low In Register Register (IDER--D22:F2) Address Offset: 04h Default Value: 00h Attribute: Size: R/W 8 bits This register implements the Cylinder Low register of the command block of the IDE function. This register can be written only by the Host. When host writes to this register, all 3 registers (IDECLIR, IDECLOR0, IDECLOR1) are updated with the written value. Host read to this register address reads the IDE Cylinder Low Out Register IDECLOR0 if DEV=0 or IDECLOR1 if DEV=1. Bit 7:0 23.6.12 Description IDE Cylinder Low Data (IDECLD)--R/W. Cylinder Low register of the command block of the IDE function. IDCLOR1--IDE Cylinder Low Out Register Device 1 Register (IDER--D22:F2) Address Offset: 04h Default Value: 00h Attribute: Size: R/W 8 bits This register is read by the Host if DEV = 1. ME-Firmware writes to this register at the end of a command of the selected device. When the host writes to the IDE Cylinder Low In Register (IDECLIR), this register is updated with that value. Bit 7:0 928 Description IDE Cylinder Low Out DEV 1. (IDECLO1)--R/W. Cylinder Low Out Register for Slave Device. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.6.13 IDCLOR0--IDE Cylinder Low Out Register Device 0 Register (IDER--D22:F2) Address Offset: 04h Default Value: 00h Attribute: Size: R/W 8 bits This register is read by the Host if DEV = 0. ME-Firmware writes to this register at the end of a command of the selected device. When the host writes to the IDE Cylinder Low In Register (IDECLIR), this register is updated with that value. Bit 7:0 23.6.14 Description IDE Cylinder Low Out DEV 0. (IDECLO0)--R/W. Cylinder Low Out Register for Master Device. IDCHOR0--IDE Cylinder High Out Register Device 0 Register (IDER--D22:F2) Address Offset: 05h Default Value: 00h Attribute: Size: R/W 8 bits This register is read by the Host if DEVice = 0. ME-Firmware writes to this register at the end of a command of the selected device. When the host writes to the IDE Cylinder High In Register (IDECHIR), this register is updated with that value. Bit 7:0 23.6.15 Description IDE Cylinder High Out DEV 0 (IDECHO0)--R/W. Cylinder High out register for Master device. IDCHOR1--IDE Cylinder High Out Register Device 1 Register (IDER--D22:F2) Address Offset: 05h Default Value: 00h Attribute: Size: R/W 8 bits This register is read by the Host if Device = 1. ME-Firmware writes to this register at the end of a command of the selected device. When the host writes to the IDE Cylinder High In Register (IDECHIR), this register is updated with that value. Bit 7:0 Datasheet Description IDE Cylinder High Out DEV 1 (IDECHO1)--R/W. Cylinder High out register for Slave device. 929 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.6.16 IDECHIR--IDE Cylinder High In Register (IDER--D22:F2) Address Offset: 05h Default Value: 00h Attribute: Size: R/W 8 bits This register implements the Cylinder High register of the command block of the IDE function. This register can be written only by the Host. When host writes to this register, all 3 registers (IDECHIR, IDECHOR0, IDECHOR1) are updated with the written value. Host read to this register address reads the IDE Cylinder High Out Register IDECHOR0 if DEV=0 or IDECHOR1 if DEV=1. Bit 7:0 23.6.17 Description IDE Cylinder High Data (IDECHD)--R/W. Cylinder High data register for IDE command block. IDEDHIR--IDE Drive/Head In Register (IDER--D22:F2) Address Offset: 06h Default Value: 00h Attribute: Size: R/W 8 bits This register implements the Drive/Head register of the command block of the IDE. This register can be written only by the Host. When host writes to this register, all 3 registers (IDEDHIR, IDEDHOR0, IDEDHOR1) are updated with the written value. Host read to this register address reads the IDE Drive/Head Out Register (IDEDHOR0) if DEV=0 or IDEDHOR1 if DEV=1. Bit 4 of this register is the DEV (master/slave) bit. This bit is cleared by hardware on IDE software reset (S_RST toggles to '1') in addition to Host system reset and D3->D0 transition of the function. Bit 7:0 930 Description IDE Drive/Head Data (IDEDHD)--R/W. Register defines the drive number, head number and addressing mode. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.6.18 IDDHOR1--IDE Drive Head Out Register Device 1 Register (IDER--D22:F2) Address Offset: 06h Default Value: 00h Attribute: Size: R/W 8 bits This register is read only by the Host. Host read to this Drive/head In register address reads the IDE Drive/Head Out Register (IDEDHOR0) if DEV=1 Bit 4 of this register is the DEV (master/slave) bit. This bit is cleared by hardware on IDE software reset (S_RST toggles to '1') in addition to the Host system reset and D3 to D0 transition of the IDE function. When the host writes to this address, it updates the value of the IDEDHIR register. Bit 7:0 23.6.19 Description IDE Drive Head Out DEV 1 (IDEDHO1)--R/W. Drive/Head Out register of Slave device. IDDHOR0--IDE Drive Head Out Register Device 0 Register (IDER--D22:F2) Address Offset: 06h Default Value: 00h Attribute: Size: R/W 8 bits This register is read only by the Host. Host read to this Drive/head In register address reads the IDE Drive/Head Out Register (IDEDHOR0) if DEV=0. Bit 4 of this register is the DEV (master/slave) bit. This bit is cleared by hardware on IDE software reset (S_RST toggles to 1) in addition to the Host system reset and D3 to D0 transition of the IDE function. When the host writes to this address, it updates the value of the IDEDHIR register. Bit 7:0 Datasheet Description IDE Drive Head Out DEV 0 (IDEDHO0)--R/W. Drive/Head Out register of Master device. 931 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.6.20 IDESD0R--IDE Status Device 0 Register (IDER--D22:F2) Address Offset: 07h Default Value: 80h Attribute: Size: R/W 8 bits This register implements the status register of the Master device (DEV = 0). This register is read only by the Host. Host read of this register clears the Master device's interrupt. When the HOST writes to the same address it writes to the command register The bits description is for ATA mode. Bit 7 Description Busy (BSY)--R/W. This bit is set by HW when the IDECR is being written and DEV=0, or when SRST bit is asserted by Host or host system reset or D3-to-D0 transition of the IDE function. This bit is cleared by FW write of 0. 6 932 Drive Ready (DRDY)--R/W. When set, this bit indicates drive is ready for command. 5 Drive Fault (DF)--R/W. Indicates Error on the drive. 4 Drive Seek Complete (DSC)--R/W. Indicates Heads are positioned over the desired cylinder. 3 Data Request (DRQ)--R/W. Set when, the drive wants to exchange data with the Host via the data register. 2 Corrected Data (CORR)--R/W. When set, this bit indicates a correctable read error has occurred. 1 Index (IDX)--R/W. This bit is set once per rotation of the medium when the index mark passes under the read/write head. 0 Error (ERR)--R/W. When set, this bit indicates an error occurred in the process of executing the previous command. The Error Register of the selected device contains the error information. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.6.21 IDESD1R--IDE Status Device 1 Register (IDER--D22:F2) Address Offset: 07h Default Value: 80h Attribute: Size: R/W 8 bits This register implements the status register of the slave device (DEV = 1). This register is read only by the Host. Host read of this register clears the slave device's interrupt. When the HOST writes to the same address it writes to the command register. The bits description is for ATA mode. Bit 7 Description Busy (BSY)--R/W. This bit is set by hardware when the IDECR is being written and DEV=0, or when SRST bit is asserted by the Host or host system reset or D3-to-D0 transition of the IDE function. This bit is cleared by FW write of 0. 23.6.22 6 Drive Ready (DRDY)--R/W. When set, indicates drive is ready for command. 5 Drive Fault (DF)--R/W. Indicates Error on the drive. 4 Drive Seek Complete (DSC)--R/W. Indicates Heads are positioned over the desired cylinder. 3 Data Request (DRQ)--R/W. Set when the drive wants to exchange data with the Host via the data register. 2 Corrected Data (CORR)--R/W. When set indicates a correctable read error has occurred. 1 Index (IDX)--R/W. This bit is set once per rotation of the medium when the index mark passes under the read/write head. 0 Error (ERR)--R/W. When set, this bit indicates an error occurred in the process of executing the previous command. The Error Register of the selected device contains the error information IDECR--IDE Command Register (IDER--D22:F2) Address Offset: 07h Default Value: 00h Attribute: Size: R/W 8 bits This register implements the Command register of the command block of the IDE function. This register can be written only by the Host. When the HOST reads the same address it reads the Status register DEV0 if DEV=0 or Status Register DEV1 if DEV=1 (Drive/Head register bit [4]). Datasheet Bit Description 7:0 IDE Command Data (IDECD)--R/W. Host sends the commands (read/ write, etc.) to the drive via this register. 933 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.7 23.7.1 IDE BAR1 Address Offset Register Symbol 2h IDDCR 2h IDASR Default Value Attribute IDE Device Control Register 00h RO, WO IDE Alternate status Register 00h RO Register Name IDDCR--IDE Device Control Register (IDER--D22:F2) Address Offset: 2h Default Value: 00h Attribute: Size: WO 8 bits This register implements the Device Control register of the Control block of the IDE function. This register is Write only by the Host. When the HOST reads to the same address it reads the Alternate Status register. Bit 7:3 23.7.2 Description Reserved 2 Software reset (S_RST)--WO. When this bit is set by the Host, it forces a reset to the device. 1 Host interrupt Disable (nIEN)--WO. When set, this bit disables hardware from sending interrupt to the Host. 0 Reserved IDASR--IDE Alternate status Register (IDER--D22:F2) Address Offset: 2h Default Value: 00h Attribute: Size: RO 8 bits This register implements the Alternate Status register of the Control block of the IDE function. This register is a mirror register to the status register in the command block. Reading this register by the HOST does not clear the IDE interrupt of the DEV selected device Host read of this register when DEV=0 (Master), Host gets the mirrored data of IDESD0R register. Host read of this register when DEV=1 (Slave), host gets the mirrored data of IDESD1R register. 934 Bit Description 7:0 IDE Alternate Status Register (IDEASR)--RO. This field mirrors the value of the DEV0/ DEV1 status register, depending on the state of the DEV bit on Host reads. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.8 IDE BAR4 Table 23-6. IDE BAR4 Register Address Map Datasheet Default Value Attribute IDE Primary Bus Master Command Register 00h RO, R/W IDE Primary Bus Master Device Specific 0 Register 00h R/W IDE Primary Bus Master Status Register 80h RO, R/W IDEPBMDS1R IDE Primary Bus Master Device Specific 1 Register 00h R/W 4h IDEPBMDTPR0 IDE Primary Bus Master Descriptor Table Pointer Register Byte 0 00h R/W 5h IDEPBMDTPR1 IDE Primary Bus Master Descriptor Table Pointer Register Byte 1 00h R/W 6h IDEPBMDTPR2 IDE Primary Bus Master Descriptor Table Pointer Register Byte 2 00h R/W 7h IDEPBMDTPR3 IDE Primary Bus Master Descriptor Table Pointer Register Byte 3 00h R/W 8h IDESBMCR IDE Secondary Bus Master Command Register 00h RO, R/W 9h IDESBMDS0R IDE Secondary Bus Master Device Specific 0 Register 00h R/W Ah IDESBMSR IDE Secondary Bus Master Status Register 00h R/W, RO Bh IDESBMDS1R IDE Secondary Bus Master Device Specific 1 Register 00h R/W Ch IDESBMDTPR0 IDE Secondary Bus Master Descriptor Table Pointer Register Byte 0 00h R/W Dh IDESBMDTPR1 IDE Secondary Bus Master Descriptor Table Pointer Register Byte 1 00h R/W Eh IDESBMDTPR2 IDE Secondary Bus Master Descriptor Table Pointer Register Byte 2 00h R/W Fh IDESBMDTPR3 IDE Secondary Bus Master Descriptor Table Pointer Register Byte 3 00h R/W Address Offset Register Symbol 0h IDEPBMCR 1h IDEPBMDS0R 2h IDEPBMSR 3h Register Name 935 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.8.1 IDEPBMCR--IDE Primary Bus Master Command Register (IDER--D22:F2) Address Offset: 00h Default Value: 00h Attribute: Size: RO, R/W 8 bits This register implements the bus master command register of the primary channel. This register is programmed by the Host. Bit 7:4 Description Reserved Read Write Command (RWC)--R/W. This bit sets the direction of bus master transfer. 3 0 = Reads are performed from system memory 1 = Writes are performed to System Memory. This bit should not be changed when the bus master function is active. 2:1 0 Reserved Start/Stop Bus Master (SSBM)--R/W. This bit gates the bus master operation of IDE function when 0. Writing 1 enables the bus master operation. Bus master operation can be halted by writing a 0 to this bit. Operation cannot be stopped and resumed. This bit is cleared after data transfer is complete as indicated by either the BMIA bit or the INT bit of the Bus Master status register is set or both are set. 23.8.2 IDEPBMDS0R--IDE Primary Bus Master Device Specific 0 Register (IDER--D22:F2) Address Offset: 01h Default Value: 00h Bit 7:0 936 Attribute: Size: R/W 8 bits Description Device Specific Data0 (DSD0)--R/W. Device Specific Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.8.3 IDEPBMSR--IDE Primary Bus Master Status Register (IDER--D22:F2) Address Offset: 02h Default Value: 80h Bit 7 Attribute: Size: RO, R/W 8 bits Description Simplex Only (SO)--RO. Value indicates whether both Bus Master Channels can be operated at the same time or not. 0 = Both can be operated independently 1 = Only one can be operated at a time. 6 Drive 1 DMA Capable (D1DC)--R/W. This bit is read/write by the host (not write 1 clear). 5 Drive 0 DMA Capable (D0DC)--R/W. This bit is read/write by the host (not write 1 clear). 4:3 23.8.4 Reserved 2 Interrupt (INT)--R/W. This bit is set by the hardware when it detects a positive transition in the interrupt logic (see IDE host interrupt generation diagram).The hardware will clear this bit when the Host SW writes 1 to it. 1 Error (ER)--R/W. Bit is typically set by FW. Hardware will clear this bit when the Host SW writes 1 to it. 0 Bus Master IDE Active (BMIA)--RO. This bit is set by hardware when SSBM register is set to 1 by the Host. When the bus master operation ends (for the whole command) this bit is cleared by FW. This bit is not cleared when the HOST writes 1 to it. IDEPBMDS1R--IDE Primary Bus Master Device Specific 1 Register (IDER--D22:F2) Address Offset: 03h Default Value: 00h Bit 7:0 Datasheet Attribute: Size: R/W 8 bits Description Device Specific Data1 (DSD1)--R/W. Device Specific Data. 937 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.8.5 IDEPBMDTPR0--IDE Primary Bus Master Descriptor Table Pointer Byte 0 Register (IDER--D22:F2) Address Offset: 04h Default Value: 00h 23.8.6 Description 7:0 Descriptor Table Pointer Byte 0 (DTPB0)--R/W. This register implements the Byte 0 (1 of 4 bytes) of the descriptor table Pointer (four I/O byte addresses) for bus master operation of the primary channel. This register is read/write by the HOST interface. IDEPBMDTPR1--IDE Primary Bus Master Descriptor Table Pointer Byte 1 Register (IDER--D22:F2) R/W 8 bits Description 7:0 Descriptor Table Pointer Byte 1 (DTPB1)--R/W. This register implements the Byte 1 (of four bytes) of the descriptor table Pointer (four I/O byte addresses) for bus master operation of the primary channel. This register is programmed by the Host. IDEPBMDTPR2--IDE Primary Bus Master Descriptor Table Pointer Byte 2 Register (IDER--D22:F2) Attribute: Size: R/W 8 bits Bit Description 7:0 Descriptor Table Pointer Byte 2 (DTPB2)--R/W. This register implements the Byte 2 (of four bytes) of the descriptor table Pointer (four I/O byte addresses) for bus master operation of the primary channel. This register is programmed by the Host. IDEPBMDTPR3--IDE Primary Bus Master Descriptor Table Pointer Byte 3 Register (IDER--D22:F2) Address Offset: 07h Default Value: 00h 938 Attribute: Size: Bit Address Offset: 06h Default Value: 00h 23.8.8 R/W 8 bits Bit Address Offset: 05h Default Value: 00h 23.8.7 Attribute: Size: Attribute: Size: R/W 8 bits Bit Description 7:0 Descriptor Table Pointer Byte 3 (DTPB3)--R/W. This register implements the Byte 3 (of four bytes) of the descriptor table Pointer (four I/O byte addresses) for bus master operation of the primary channel. This register is programmed by the Host Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.8.9 IDESBMCR--IDE Secondary Bus Master Command Register (IDER--D22:F2) Address Offset: 08h Default Value: 00h Bit 7:4 3 2:1 Attribute: Size: R/W 8 bits Description Reserved Read Write Command (RWC)--R/W. This bit sets the direction of bus master transfer. When 0, Reads are performed from system memory; when 1, writes are performed to System Memory. This bit should not be changed when the bus master function is active. Reserved Start/Stop Bus Master (SSBM)--R/W. This bit gates the bus master operation of IDE function when zero. 0 Writing 1 enables the bus master operation. Bus master operation can be halted by writing a 0 to this bit. Operation cannot be stopped and resumed. This bit is cleared after data transfer is complete as indicated by either the BMIA bit or the INT bit of the Bus Master status register is set or both are set. 23.8.10 IDESBMDS0R--IDE Secondary Bus Master Device Specific 0 Register (IDER--D22:F2) Address Offset: 09h Default Value: 00h Bit 7:0 Datasheet Attribute: Size: R/W 8 bits Description Device Specific Data0 (DSD0)--R/W. This register implements the bus master Device Specific 1 register of the secondary channel. This register is programmed by the Host. 939 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.8.11 IDESBMSR--IDE Secondary Bus Master Status Register (IDER--D22:F2) Address Offset: 0Ah Default Value: 80h Bit 7 Attribute: Size: R/W, RO 8 bits Description Simplex Only (SO)--R/W. This bit indicates whether both Bus Master Channels can be operated at the same time or not. 0 = Both can be operated independently 1 = Only one can be operated at a time. 6 5 4:0 23.8.12 Drive 1 DMA Capable (D1DC)--R/W. This bit is read/write by the host. Drive 0 DMA Capable (D0DC)--R/W. This bit is read/write by the host. Reserved IDESBMDS1R--IDE Secondary Bus Master Device Specific 1 Register (IDER--D22:F2) Address Offset: 0Bh Default Value: 00h Bit 7:0 23.8.13 R/W 8 bits Description Device Specific Data1 (DSD1)--R/W. This register implements the bus master Device Specific 1 register of the secondary channel. This register is programmed by the Host for device specific data if any. IDESBMDTPR0--IDE Secondary Bus Master Descriptor Table Pointer Byte 0 Register (IDER--D22:F2) Address Offset: 0Ch Default Value: 00h 940 Attribute: Size: Attribute: Size: R/W 8 bits Bit Description 7:0 Descriptor Table Pointer Byte 0 (DTPB0)--R/W. This register implements the Byte 0 (1 of 4 bytes) of the descriptor table Pointer (four I/O byte addresses) for bus master operation of the secondary channel. This register is read/write by the HOST interface. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.8.14 IDESBMDTPR1--IDE Secondary Bus Master Descriptor Table Pointer Byte 1 Register (IDER--D22:F2) Address Offset: 0Dh Default Value: 00h 23.8.15 Description 7:0 Descriptor Table Pointer Byte 1 (DTPB1)--R/W. This register implements the Byte 1 (of four bytes) of the descriptor table Pointer (four I/O byte addresses) for bus master operation of the secondary channel. This register is programmed by the Host. IDESBMDTPR2--IDE Secondary Bus Master Descriptor Table Pointer Byte 2 Register (IDER--D22:F2) Attribute: Size: R/W 8 bits Bit Description 7:0 Descriptor Table Pointer Byte 2 (DTPB2)--R/W. This register implements the Byte 2 (of four bytes) of the descriptor table Pointer (four I/O byte addresses) for bus master operation of the secondary channel. This register is programmed by the Host. IDESBMDTPR3--IDE Secondary Bus Master Descriptor Table Pointer Byte 3 Register (IDER--D22:F2) Address Offset: 0Fh Default Value: 00h Datasheet R/W 8 bits Bit Address Offset: 0Eh Default Value: 00h 23.8.16 Attribute: Size: Attribute: Size: R/W 8 bits Bit Description 7:0 Descriptor Table Pointer Byte 3 (DTPB3)--R/W. This register implements the Byte 3 (of four bytes) of the descriptor table Pointer (four I/O byte addresses) for bus master operation of the secondary channel. This register is programmed by the Host. 941 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.9 Serial Port for Remote Keyboard and Text (KT) Redirection (KT--D22:F3) Table 23-7. Serial Port for Remote Keyboard and Text (KT) Redirection Register Address Map 942 Default Value Attribute Vendor Identification 8086h RO DID Device Identification See Register description RO 04-05h CMD Command Register 0000h RO, R/W 06-07h STS Device Status 00B0h RO 08h RID Revision ID See Register description RO 09-0Bh CC Class Codes 070002h RO 0Ch CLS Cache Line Size 00h RO 10-13h KTIBA KT IO Block Base Address 00000001h RO, R/W 14-17h KTMBA KT Memory Block Base Address 00000000h RO, R/W Sub System Identifiers 00008086h R/WO Expansion ROM Base Address 00000000h RO C8h RO R/W, RO Address Offset Register Symbol 00-01h VID 02-03h Register Name 2C-2Fh SS 30-33h EROM 34h CAP Capabilities Pointer 3C-3Dh INTR Interrupt Information 0200h C8-C9h PID PCI Power Management Capability ID D001h RO CA-CBh PC PCI Power Management Capabilities 0023h RO CC-CFh PMCS PCI Power Management Control and Status 00000000h RO, R/W D0-D1h MID Message Signaled Interrupt Capability ID 0005h RO D2-D3h MC Message Signaled Interrupt Message Control 0080h RO, R/W D4-D7h MA Message Signaled Interrupt Message Address 00000000h RO, R/W D8-DBh MAU Message Signaled Interrupt Message Upper Address 00000000h RO, R/W DC-DDh MD Message Signaled Interrupt Message Data 0000h R/W Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.9.1 VVID--Vendor Identification Register (KT--D22:F3) Address Offset: 00-01h Default Value: 8086h Bit 15:0 23.9.2 RO 16 bits Description Vendor ID (VID)--RO. This is a 16-bit value assigned by Intel. DID--Device Identification Register (KT--D22:F3) Address Offset: 02-03h Default Value: See bit description 23.9.3 Attribute: Size: Attribute: Size: RO 16 bits Bit Description 15:0 Device ID (DID)--RO. This is a 16-bit value assigned to the PCH KT controller. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register. CMD--Command Register Register (KT--D22:F3) Address Offset: 04-05h Default Value: 0000h Bit 15:11 Attribute: Size: RO, R/W 16 bits Description Reserved Interrupt Disable (ID)--R/W. This bit disables pin-based INTx# interrupts. This bit has no effect on MSI operation. 10 1 = Internal INTx# messages will not be generated. 0 = Internal INTx# messages are generated if there is an interrupt and MSI is not enabled. 9:3 Datasheet Reserved 2 Bus Master Enable (BME)--R/W. This bit controls the KT function's ability to act as a master for data transfers. This bit does not impact the generation of completions for split transaction commands. For KT, the only bus mastering activity is MSI generation. 1 Memory Space Enable (MSE)--R/W. This bit controls Access to the PT function's target memory space. 0 I/O Space enable (IOSE)--R/W. This bit controls access to the PT function's target I/O space. 943 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.9.4 STS--Device Status Register (KT--D22:F3) Address Offset: 06-07h Default Value: 00B0h Bit 15:11 10:9 8:5 Description Reserved DEVSEL# Timing Status (DEVT)--RO. This field controls the device select time for the PT function's PCI interface. Reserved Capabilities List (CL)--RO. This bit indicates that there is a capabilities pointer implemented in the device. 3 Interrupt Status (IS)--RO. This bit reflects the state of the interrupt in the function. Setting of the Interrupt Disable bit to 1 has no affect on this bit. Only when this bit is a 1 and ID bit is 0 is the INTB interrupt asserted to the Host. Reserved RID--Revision ID Register (KT--D22:F3) Address Offset: 08h Default Value: See bit description Bit 7:0 23.9.6 Attribute: Size: RO 8 bits Description Revision ID (RID)--RO. See the Intel(R) 5 Series Chipset and Intel(R) 3400 Series Chipset Specification Update for the value of the Device ID Register. CC--Class Codes Register (KT--D22:F3) Address Offset: 09-0Bh Default Value: 070002h Attribute: Size: RO 24 bits Bit Description 23:16 Base Class Code (BCC)--RO This field indicates the base class code of the KT host controller device. 15:8 7:0 944 RO 16 bits 4 2:0 23.9.5 Attribute: Size: Sub Class Code (SCC)--RO This field indicates the sub class code of the KT host controller device. Programming Interface (PI)--RO This field indicates the programming interface of the KT host controller device. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.9.7 CLS--Cache Line Size Register (KT--D22:F3) Address Offset: 0Ch Default Value: 00h Attribute: Size: RO 8 bits This register defines the system cache line size in DWORD increments. Mandatory for master which use the Memory-Write and Invalidate command. Bit 7:0 23.9.8 Description Cache Line Size (CLS)--RO. All writes to system memory are Memory Writes. KTIBA--KT IO Block Base Address Register (KT--D22:F3) Address Offset: 10-13h Default Value: 00000001h Bit 31:16 15:3 2:1 0 23.9.9 RO, R/W 32 bits Description Reserved Base Address (BAR)--R/W. This field provides the base address of the I/O space (8 consecutive I/O locations). Reserved Resource Type Indicator (RTE)--RO. This bit indicates a request for I/O space KTMBA--KT Memory Block Base Address Register (KT--D22:F3) Address Offset: 14-17h Default Value: 00000000h Bit 31:12 11:4 3 2:1 0 Datasheet Attribute: Size: Attribute: Size: RO, R/W 32 bits Description Base Address (BAR)--R/W. This field provides the base address for Memory Mapped I,O BAR. Bits 31:12 correspond to address signals 31:12. Reserved Prefetchable (PF)--RO. This bit indicates that this range is not pre-fetchable. Type (TP)--RO. This field indicates that this range can be mapped anywhere in 32bit address space. Resource Type Indicator (RTE)--RO. This bit indicates a request for register memory space. 945 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.9.10 SVID--Subsystem Vendor ID Register (KT--D22:F3) Address Offset: 2Ch-2Dh Default Value: 0000h 23.9.11 Attribute: Size: Bit Description 15:0 Subsystem Vendor ID (SSVID)--R/WO. Indicates the sub-system vendor identifier. This field should be programmed by BIOS during boot-up. Once written, this register becomes Read Only. This field can only be cleared by PLTRST#. SID--Subsystem ID Register (KT--D22:F3) Address Offset: 2Eh-2Fh Default Value: 8086h Attribute: Size: Bit 15:0 23.9.12 R/WO 16 bits R/WO 16 bits Description Subsystem ID (SSID)--R/WO. Indicates the sub-system identifier. This field should be programmed by BIOS during boot-up. Once written, this register becomes Read Only. This field can only be cleared by PLTRST#. CAP--Capabilities Pointer Register (KT--D22:F3) Address Offset: 34h Default Value: C8h Attribute: Size: RO 8 bits This optional register is used to point to a linked list of new capabilities implemented by the device. Bit 7:0 23.9.13 Description Capability Pointer (CP)--RO. This field indicates that the first capability pointer is offset C8h (the power management capability). INTR--Interrupt Information Register (KT--D22:F3) Address Offset: 3C-3Dh Default Value: 0200h Attribute: Size: Bit 15:8 7:0 946 R/W, RO 16 bits Description Interrupt Pin (IPIN)--RO. A value of 1h/2h/3h/4h indicates that this function implements legacy interrupt on INTA/INTB/INTC/INTD, respectively Function Value INTx (3 KT/Serial Port) 02h INTB Interrupt Line (ILINE)--R/W. The value written in this register tells which input of the system interrupt controller, the device's interrupt pin is connected to. This value is used by the OS and the device driver, and has no affect on the hardware. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.9.14 PID--PCI Power Management Capability ID Register (KT--D22:F3) Address Offset: C8-C9h Default Value: D001h Bit 15:8 7:0 23.9.15 RO 16 bits Description Next Capability (NEXT)--RO. A value of D0h points to the MSI capability. Cap ID (CID)--RO. This field indicates that this pointer is a PCI power management. PC--PCI Power Management Capabilities ID Register (KT--D22:F3) Address Offset: CA-CBh Default Value: 0023h Bit 15:11 10:6 Attribute: Size: RO 16 bits Description PME Support (PME)--RO.This field indicates no PME# in the PT function. Reserved 5 Device Specific Initialization (DSI)--RO. This bit indicates that no device-specific initialization is required. 4 Reserved 3 PME Clock (PMEC)--RO. This bit indicates that PCI clock is not required to generate PME# 2:0 23.9.16 Attribute: Size: Version (VS)--RO. This field indicates support for the PCI Power Management Specification, Revision 1.2. MID--Message Signaled Interrupt Capability ID Register (KT--D22:F3) Address Offset: D0-D1h Default Value: 0005h Attribute: Size: RO 16 bits Message Signalled Interrupt is a feature that allows the device/function to generate an interrupt to the host by performing a DWORD memory write to a system specified address with system specified data. This register is used to identify and configure an MSI capable device. Bit Datasheet Description 15:8 Next Pointer (NEXT)--RO. This value indicates this is the last item in the list. 7:0 Capability ID (CID)--RO. This field value of Capabilities ID indicates device is capable of generating MSI. 947 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.9.17 MC--Message Signaled Interrupt Message Control Register (KT--D22:F3) Address Offset: D2-D3h Default Value: 0080h Bit 15:8 7 RO, R/W 16 bits Description Reserved 64 Bit Address Capable (C64)--RO. Capable of generating 64-bit and 32-bit messages. 6:4 Multiple Message Enable (MME)--R/W.These bits are R/W for software compatibility, but only one message is ever sent by the PT function. 3:1 Multiple Message Capable (MMC)--RO. Only one message is required. 0 23.9.18 Attribute: Size: MSI Enable (MSIE)--R/W. If set, MSI is enabled and traditional interrupt pins are not used to generate interrupts. MA--Message Signaled Interrupt Message Address Register (KT--D22:F3) Address Offset: D4-D7h Default Value: 00000000h Attribute: Size: RO, R/W 32 bits This register specifies the DWORD aligned address programmed by system software for sending MSI. Bit 31:2 1:0 23.9.19 Description Address (ADDR)--R/W. Lower 32 bits of the system specified message address, always DWord aligned. Reserved MAU--Message Signaled Interrupt Message Upper Address Register (KT--D22:F3) Address Offset: D8-DBh Default Value: 00000000h Bit 31:4 3:0 948 Attribute: Size: RO, R/W 32 bits Description Reserved Address (ADDR)--R/W. Upper 4 bits of the system specified message address. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.9.20 MD--Message Signaled Interrupt Message Data Register (KT--D22:F3) Address Offset: DC-DDh Default Value: 0000h Attribute: Size: R/W 16 bits This 16-bit field is programmed by system software if MSI is enabled Bit 15:0 23.10 Description Data (DATA)--R/W. This MSI data is driven onto the lower word of the data bus of the MSI memory write transaction. KT IO/ Memory Mapped Device Registers Table 23-8. KT IO/ Memory Mapped Device Register Address Map Datasheet Default Value Address Offset Register Symbol 0h KTRxBR KT Receive Buffer Register 00h RO 0h KTTHR KT Transmit Holding Register 00h WO 0h KTDLLR KT Divisor Latch LSB Register 00h R/W 1h KTIER KT Interrupt Enable register 00h R/W RO 1h KTDLMR KT Divisor Latch MSB Register 00h R/W 2h KTIIR KT Interrupt Identification register 01h RO 2h KTFCR KT FIFO Control register 00h WO 3h KTLCR KT Line Control register 03h R/W 4h KTMCR KT Modem Control register 00h RO, R/W 5h KTLSR KT Line Status register 00h RO 6h KTMSR KT Modem Status register 00h RO 7h KTSCR KT Scratch register 00h R/W Register Name Attribute 949 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.10.1 KTRxBR--KT Receive Buffer Register (KT--D23:F3) Address Offset: 00h Default Value: 00h Attribute: Size: RO 8 bits This implements the KT Receiver Data register. Host access to this address, depends on the state of the DLAB bit (KTLCR[7]). It must be 0 to access the KTRxBR. RxBR: Host reads this register when FW provides it the receive data in non-FIFO mode. In FIFO mode, host reads to this register translate into a read from ME memory (RBR FIFO). Bit 7:0 23.10.2 Description Receiver Buffer Register (RBR)--RO. Implements the Data register of the Serial Interface. If the Host does a read, it reads from the Receive Data Buffer. KTTHR--KT Transmit Holding Register (KT--D23:F3) Address Offset: 00h Default Value: 00h Attribute: Size: RO 8 bits This implements the KT Transmit Data register. Host access to this address, depends on the state of the DLAB bit (KTLCR[7]). It must be 0 to access the KTTHR. THR: When host wants to transmit data in the non-FIFO mode, it writes to this register. In FIFO mode, writes by host to this address cause the data byte to be written by hardware to ME memory (THR FIFO). 950 Bit Description 7:0 Transmit Holding Register (THR)--WO. Implements the Transmit Data register of the Serial Interface. If the Host does a write, it writes to the Transmit Holding Register. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.10.3 KTDLLR--KT Divisor Latch LSB Register (KT--D23:F3) Address Offset: 00h Default Value: 00h Attribute: Size: R/W 8 bits This register implements the KT DLL register. Host can Read/Write to this register only when the DLAB bit (KTLCR[7]) is 1. When this bit is 0, Host accesses the KTTHR or the KTRBR depending on Read or Write. This is the standard Serial Port Divisor Latch register. This register is only for software compatibility and does not affect performance of the hardware. 23.10.4 Bit Description 7:0 Divisor Latch LSB (DLL)--R/W. Implements the DLL register of the Serial Interface. KTIER--KT Interrupt Enable Register (KT--D23:F3) Address Offset: 01h Default Value: 00h Attribute: Size: R/W 8 bits This implements the KT Interrupt Enable register. Host access to this address, depends on the state of the DLAB bit (KTLCR[7]). It must be "0" to access this register. The bits enable specific events to interrupt the Host. Bit 7:4 Datasheet Description Reserved 3 MSR (IER2)--R/W. When set, this bit enables bits in the Modem Status register to cause an interrupt to the host. 2 LSR (IER1)--R/W.When set, this bit enables bits in the Receiver Line Status Register to cause an Interrupt to the Host. 1 THR (IER1)--R/W. When set, this bit enables an interrupt to be sent to the Host when the transmit Holding register is empty. 0 DR (IER0)--R/W. When set, the Received Data Ready (or Receive FIFO Timeout) interrupts are enabled to be sent to Host. 951 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.10.5 KTDLMR--KT Divisor Latch MSB Register (KT--D23:F3) Address Offset: 01h Default Value: 00h Attribute: Size: R/W 8 bits Host can Read/Write to this register only when the DLAB bit (KTLCR[7]) is 1. When this bit is 0, Host accesses the KTIER. This is the standard Serial interface's Divisor Latch register's MSB. This register is only for SW compatibility and does not affect performance of the hardware. 23.10.6 Bit Description 7:0 Divisor Latch MSB (DLM)--R/W. Implements the Divisor Latch MSB register of the Serial Interface. KTIIR--KT Interrupt Identification Register (KT--D23:F3) Address Offset: 02h Default Value: 00h Attribute: Size: RO 8 bits The KT IIR register prioritizes the interrupts from the function into 4 levels and records them in the IIR_STAT field of the register. When Host accesses the IIR, hardware freezes all interrupts and provides the priority to the Host. Hardware continues to monitor the interrupts but does not change its current indication until the Host read is over. Table in the Host Interrupt Generation section shows the contents. Bit Description 7 FIFO Enable (FIEN1)--RO. This bit is connected by hardware to bit 0 in the FCR register. 6 FIFO Enable (FIEN0)--RO. This bit is connected by hardware to bit 0 in the FCR register. 5:4 Reserved 3:1 IIR STATUS (IIRSTS)--RO. These bits are asserted by the hardware according to the source of the interrupt and the priority level. Interrupt Status (INTSTS)--RO. 0 0 = Pending interrupt to Host 1 = No pending interrupt to Host 952 Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.10.7 KTFCR--KT FIFO Control Register (KT--D23:F3) Address Offset: 02h Default Value: 00h Attribute: Size: WO 8 bits When Host writes to this address, it writes to the KTFCR. The FIFO control Register of the serial interface is used to enable the FIFOs, set the receiver FIFO trigger level and clear FIFOs under the direction of the Host. When Host reads from this address, it reads the KTIIR. Bit Description Receiver Trigger Level (RTL)--WO. Trigger level in bytes for the RCV FIFO. Once the trigger level number of bytes is reached, an interrupt is sent to the Host. 7:6 00 = 01 01 = 04 10 = 08 11 = 14 5:3 23.10.8 Reserved 2 XMT FIFO Clear (XFIC)--WO. When the Host writes one to this bit, the hardware will clear the XMT FIFO. This bit is self-cleared by hardware. 1 RCV FIFO Clear (RFIC)--WO. When the Host writes one to this bit, the hardware will clear the RCV FIFO. This bit is self-cleared by hardware. 0 FIFO Enable (FIE)--WO.When set, this bit indicates that the KT interface is working in FIFO node. When this bit value is changed the RCV and XMT FIFO are cleared by hardware. KTLCR--KT Line Control Register (KT--D23:F3) Address Offset: 03h Default Value: 00h Attribute: Size: R/W 8 bits The line control register specifies the format of the asynchronous data communications exchange and sets the DLAB bit. Most bits in this register have no affect on hardware and are only used by the FW. Bit Description 7 Divisor Latch Address Bit (DLAB)--R/W. This bit is set when the Host wants to read/write the Divisor Latch LSB and MSB Registers. This bit is cleared when the Host wants to access the Receive Buffer Register or the Transmit Holding Register or the Interrupt Enable Register. 6 Break Control (BC)--R/W. This bit has no affect on hardware. 5:4 3 Parity Enable (PE)--R/W.This bit has no affect on hardware. 2 Stop Bit Select (SBS)--R/W. This bit has no affect on hardware. 1:0 Datasheet Parity Bit Mode (PBM)--R/W. This bit has no affect on hardware. Word Select Byte (WSB)--R/W. This bit has no affect on hardware. 953 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.10.9 KTMCR--KT Modem Control Register (KT--D23:F3) Address Offset: 04h Default Value: 00h Attribute: Size: R/W 8 bits The Modem Control Register controls the interface with the modem. Since the FW emulates the modem, the Host communicates to the FW via this register. Register has impact on hardware when the Loopback mode is on. Bit 7:5 954 Description Reserved 4 Loop Back Mode (LBM)--R/W. When set by the Host, this bit indicates that the serial port is in loop Back mode. This means that the data that is transmitted by the host should be received. Helps in debug of the interface. 3 Output 2 (OUT2)--R/W. This bit has no affect on hardware in normal mode. In loop back mode the value of this bit is written by hardware to the Modem Status Register bit 7. 2 Output 1 (OUT1)--R/W. This bit has no affect on hardware in normal mode. In loop back mode the value of this bit is written by hardware to Modem Status Register bit 6. 1 Request to Send Out (RTSO)--R/W. This bit has no affect on hardware in normal mode. In loopback mode, the value of this bit is written by hardware to Modem Status Register bit 4. 0 Data Terminal Ready Out (DRTO)--R/W. This bit has no affect on hardware in normal mode. In loopback mode, the value in this bit is written by hardware to Modem Status Register Bit 5. Datasheet Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.10.10 KTLSR--KT Line Status Register (KT--D23:F3) Address Offset: 05h Default Value: 00h Attribute: Size: WO 8 bits This register provides status information of the data transfer to the Host. Error indication, etc. are provided by the HW/FW to the host via this register. Bit Description 7 RX FIFO Error (RXFER)--RO. This bit is cleared in non FIFO mode. This bit is connected to BI bit in FIFO mode. 6 Transmit Shift Register Empty (TEMT)--RO. This bit is connected by HW to bit 5 (THRE) of this register. Transmit Holding Register Empty (THRE)--RO. This bit is always set when the mode (FIFO/Non-FIFO) is changed by the Host. This bit is active only when the THR operation is enabled by the FW. This bit has acts differently in the different modes: 5 Non FIFO: This bit is cleared by hardware when the Host writes to the THR registers and set by hardware when the FW reads the THR register. FIFO mode: This bit is set by hardware when the THR FIFO is empty, and cleared by hardware when the THR FIFO is not empty. This bit is reset on Host system reset or D3->D0 transition. Break Interrupt (BI)--RO. This bit is cleared by hardware when the LSR register is being read by the Host. This bit is set by hardware in two cases: 4 * In FIFO mode the FW sets the BI bit by setting the SBI bit in the KTRIVR register (See KT AUX registers) * In non-FIFO mode the FW sets the BI bit by setting the BIA bit in the KTRxBR register (see KT AUX registers) 3:2 1 Reserved Overrun Error (OE): This bit is cleared by hardware when the LSR register is being read by the Host. The FW typically sets this bit, but it is cleared by hardware when the host reads the LSR. Data Ready (DR)--RO. 0 Non-FIFO Mode: This bit is set when the FW writes to the RBR register and cleared by hardware when the RBR register is being Read by the Host. FIFO Mode: This bit is set by hardware when the RBR FIFO is not empty and cleared by hardware when the RBR FIFO is empty. This bit is reset on Host System Reset or D3->D0 transition. Datasheet 955 Intel(R) Management Engine Interface (MEI) Subsystem Registers (D22:F0) 23.10.11 KTMSR--KT Modem Status Register (KT--D23:F3) Address Offset: 06h Default Value: 00h Attribute: Size: RO 8 bits The functionality of the Modem is emulated by the FW. This register provides the status of the current state of the control lines from the modem. Bit Description 7 Data Carrier Detect (DCD)--RO. In Loop Back mode this bit is connected by hardware to the value of MCR bit 3. 6 Ring Indicator (RI)--RO. In Loop Back mode this bit is connected by hardware to the value of MCR bit 2. 5 Data Set Ready (DSR)--RO. In Loop Back mode this bit is connected by hardware to the value of MCR bit 0. 4 Clear To Send (CTS)--RO. In Loop Back mode this bit is connected by hardware to the value of MCR bit 1. 3 Delta Data Carrier Detect (DDCD)--RO. This bit is set when bit 7 is changed. This bit is cleared by hardware when the MSR register is being read by the HOST driver. 2 Trailing Edge of Read Detector (TERI)--RO. This bit is set when bit 6 is changed from 1 to 0. This bit is cleared by hardware when the MSR register is being read by the Host driver. 1 Delta Data Set Ready (DDSR)--RO. This bit is set when bit 5 is changed. This bit is cleared by hardware when the MSR register is being read by the Host driver. 0 Delta Clear To Send (DCTS)--RO. This bit is set when bit 4 is changed. This bit is cleared by hardware when the MSR register is being read by the Host driver. 956 Datasheet